blob: 9ce91dd60cb6629fb4ea95bdda4e0f7a7a4f1733 [file] [log] [blame]
Markus Mayer28ea3f32013-06-19 16:24:14 -07001/*
2 * Copyright (C) 2013 Broadcom Corporation
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License as
6 * published by the Free Software Foundation version 2.
7 *
8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
9 * kind, whether express or implied; without even the implied warranty
10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 */
13
14/dts-v1/;
15
Tim Kryger94db37a2014-01-07 10:53:41 -080016#include <dt-bindings/gpio/gpio.h>
17
Markus Mayer28ea3f32013-06-19 16:24:14 -070018#include "bcm11351.dtsi"
19
20/ {
21 model = "BCM28155 AP board";
Christian Daudt15e22dd2013-07-30 16:27:10 -070022 compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
Markus Mayer28ea3f32013-06-19 16:24:14 -070023
24 memory {
25 reg = <0x80000000 0x40000000>; /* 1 GB */
26 };
27
28 uart@3e000000 {
29 status = "okay";
30 };
Christian Daudt30ca6532013-08-07 16:57:05 -070031
Tim Kryger3f5af102013-12-06 15:45:28 -080032 i2c@3e016000 {
33 status="okay";
34 clock-frequency = <400000>;
35 };
36
37 i2c@3e017000 {
38 status="okay";
39 clock-frequency = <400000>;
40 };
41
42 i2c@3e018000 {
43 status="okay";
44 clock-frequency = <400000>;
45 };
46
47 i2c@3500d000 {
48 status="okay";
Matt Portera51b4c02014-03-12 10:07:17 -040049 clock-frequency = <100000>;
50
51 pmu: pmu@8 {
52 reg = <0x08>;
53 };
Tim Kryger3f5af102013-12-06 15:45:28 -080054 };
55
Christian Daudt30ca6532013-08-07 16:57:05 -070056 sdio2: sdio@3f190000 {
57 non-removable;
58 max-frequency = <48000000>;
Matt Portera51b4c02014-03-12 10:07:17 -040059 vmmc-supply = <&camldo1_reg>;
60 vqmmc-supply = <&iosr1_reg>;
Christian Daudt30ca6532013-08-07 16:57:05 -070061 status = "okay";
62 };
63
64 sdio4: sdio@3f1b0000 {
65 max-frequency = <48000000>;
Tim Kryger94db37a2014-01-07 10:53:41 -080066 cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
Matt Portera51b4c02014-03-12 10:07:17 -040067 vmmc-supply = <&sdldo_reg>;
68 vqmmc-supply = <&sdxldo_reg>;
Christian Daudt30ca6532013-08-07 16:57:05 -070069 status = "okay";
70 };
Matt Porterd97f7992013-12-19 09:23:10 -050071
Tim Kryger8411ca12014-04-25 11:31:14 -070072 pwm: pwm@3e01a000 {
73 status = "okay";
74 };
75
Matt Porterd97f7992013-12-19 09:23:10 -050076 usbotg: usb@3f120000 {
Matt Portera51b4c02014-03-12 10:07:17 -040077 vusb_d-supply = <&usbldo_reg>;
78 vusb_a-supply = <&iosr1_reg>;
Matt Porterd97f7992013-12-19 09:23:10 -050079 status = "okay";
80 };
81
82 usbphy: usb-phy@3f130000 {
83 status = "okay";
84 };
Markus Mayer28ea3f32013-06-19 16:24:14 -070085};
Matt Portera51b4c02014-03-12 10:07:17 -040086
87#include "bcm59056.dtsi"
88
89&pmu {
90 compatible = "brcm,bcm59056";
91 interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
92 regulators {
93 camldo1_reg: camldo1 {
94 regulator-min-microvolt = <3300000>;
95 regulator-max-microvolt = <3300000>;
Matt Portera97d67d2014-03-12 09:14:39 -040096 regulator-always-on;
Matt Portera51b4c02014-03-12 10:07:17 -040097 };
98
99 sdldo_reg: sdldo {
100 regulator-min-microvolt = <3000000>;
101 regulator-max-microvolt = <3000000>;
102 };
103
104 sdxldo_reg: sdxldo {
105 regulator-min-microvolt = <2700000>;
106 regulator-max-microvolt = <3300000>;
107 };
108
109 usbldo_reg: usbldo {
110 regulator-min-microvolt = <3300000>;
111 regulator-max-microvolt = <3300000>;
112 regulator-always-on;
113 };
114
115 iosr1_reg: iosr1 {
116 regulator-min-microvolt = <1800000>;
117 regulator-max-microvolt = <1800000>;
118 regulator-always-on;
119 };
120 };
121};