blob: 9a45f9bb6a255d421bd2903e69120c0a8e281017 [file] [log] [blame]
Ben Dooks31321b72008-07-28 12:04:08 +01001Upgrading I2C Drivers to the new 2.6 Driver Model
2=================================================
3
4Ben Dooks <ben-linux@fluff.org>
5
6Introduction
7------------
8
9This guide outlines how to alter existing Linux 2.6 client drivers from
10the old to the new new binding methods.
11
12
13Example old-style driver
14------------------------
15
16
17struct example_state {
18 struct i2c_client client;
19 ....
20};
21
22static struct i2c_driver example_driver;
23
24static unsigned short ignore[] = { I2C_CLIENT_END };
25static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END };
26
27I2C_CLIENT_INSMOD;
28
29static int example_attach(struct i2c_adapter *adap, int addr, int kind)
30{
31 struct example_state *state;
32 struct device *dev = &adap->dev; /* to use for dev_ reports */
33 int ret;
34
35 state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
36 if (state == NULL) {
37 dev_err(dev, "failed to create our state\n");
38 return -ENOMEM;
39 }
40
41 example->client.addr = addr;
42 example->client.flags = 0;
43 example->client.adapter = adap;
44
45 i2c_set_clientdata(&state->i2c_client, state);
46 strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE);
47
48 ret = i2c_attach_client(&state->i2c_client);
49 if (ret < 0) {
50 dev_err(dev, "failed to attach client\n");
51 kfree(state);
52 return ret;
53 }
54
55 dev = &state->i2c_client.dev;
56
57 /* rest of the initialisation goes here. */
58
59 dev_info(dev, "example client created\n");
60
61 return 0;
62}
63
64static int __devexit example_detach(struct i2c_client *client)
65{
66 struct example_state *state = i2c_get_clientdata(client);
67
68 i2c_detach_client(client);
69 kfree(state);
70 return 0;
71}
72
73static int example_attach_adapter(struct i2c_adapter *adap)
74{
75 return i2c_probe(adap, &addr_data, example_attach);
76}
77
78static struct i2c_driver example_driver = {
79 .driver = {
80 .owner = THIS_MODULE,
81 .name = "example",
82 },
83 .attach_adapter = example_attach_adapter,
84 .detach_client = __devexit_p(example_detach),
85 .suspend = example_suspend,
86 .resume = example_resume,
87};
88
89
90Updating the client
91-------------------
92
93The new style binding model will check against a list of supported
94devices and their associated address supplied by the code registering
95the busses. This means that the driver .attach_adapter and
96.detach_adapter methods can be removed, along with the addr_data,
97as follows:
98
99- static struct i2c_driver example_driver;
100
101- static unsigned short ignore[] = { I2C_CLIENT_END };
102- static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END };
103
104- I2C_CLIENT_INSMOD;
105
106- static int example_attach_adapter(struct i2c_adapter *adap)
107- {
108- return i2c_probe(adap, &addr_data, example_attach);
109- }
110
111 static struct i2c_driver example_driver = {
112- .attach_adapter = example_attach_adapter,
113- .detach_client = __devexit_p(example_detach),
114 }
115
116Add the probe and remove methods to the i2c_driver, as so:
117
118 static struct i2c_driver example_driver = {
119+ .probe = example_probe,
120+ .remove = __devexit_p(example_remove),
121 }
122
123Change the example_attach method to accept the new parameters
124which include the i2c_client that it will be working with:
125
126- static int example_attach(struct i2c_adapter *adap, int addr, int kind)
127+ static int example_probe(struct i2c_client *client,
128+ const struct i2c_device_id *id)
129
130Change the name of example_attach to example_probe to align it with the
131i2c_driver entry names. The rest of the probe routine will now need to be
132changed as the i2c_client has already been setup for use.
133
134The necessary client fields have already been setup before
135the probe function is called, so the following client setup
136can be removed:
137
138- example->client.addr = addr;
139- example->client.flags = 0;
140- example->client.adapter = adap;
141-
142- strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE);
143
144The i2c_set_clientdata is now:
145
146- i2c_set_clientdata(&state->client, state);
147+ i2c_set_clientdata(client, state);
148
149The call to i2c_attach_client is no longer needed, if the probe
150routine exits successfully, then the driver will be automatically
151attached by the core. Change the probe routine as so:
152
153- ret = i2c_attach_client(&state->i2c_client);
154- if (ret < 0) {
155- dev_err(dev, "failed to attach client\n");
156- kfree(state);
157- return ret;
158- }
159
160
161Remove the storage of 'struct i2c_client' from the 'struct example_state'
162as we are provided with the i2c_client in our example_probe. Instead we
163store a pointer to it for when it is needed.
164
165struct example_state {
166- struct i2c_client client;
167+ struct i2c_client *client;
168
169the new i2c client as so:
170
171- struct device *dev = &adap->dev; /* to use for dev_ reports */
172+ struct device *dev = &i2c_client->dev; /* to use for dev_ reports */
173
174And remove the change after our client is attached, as the driver no
175longer needs to register a new client structure with the core:
176
177- dev = &state->i2c_client.dev;
178
179In the probe routine, ensure that the new state has the client stored
180in it:
181
182static int example_probe(struct i2c_client *i2c_client,
183 const struct i2c_device_id *id)
184{
185 struct example_state *state;
186 struct device *dev = &i2c_client->dev;
187 int ret;
188
189 state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
190 if (state == NULL) {
191 dev_err(dev, "failed to create our state\n");
192 return -ENOMEM;
193 }
194
195+ state->client = i2c_client;
196
197Update the detach method, by changing the name to _remove and
198to delete the i2c_detach_client call. It is possible that you
199can also remove the ret variable as it is not not needed for
200any of the core functions.
201
202- static int __devexit example_detach(struct i2c_client *client)
203+ static int __devexit example_remove(struct i2c_client *client)
204{
205 struct example_state *state = i2c_get_clientdata(client);
206
207- i2c_detach_client(client);
208
209And finally ensure that we have the correct ID table for the i2c-core
210and other utilities:
211
212+ struct i2c_device_id example_idtable[] = {
213+ { "example", 0 },
214+ { }
215+};
216+
217+MODULE_DEVICE_TABLE(i2c, example_idtable);
218
219static struct i2c_driver example_driver = {
220 .driver = {
221 .owner = THIS_MODULE,
222 .name = "example",
223 },
224+ .id_table = example_ids,
225
226
227Our driver should now look like this:
228
229struct example_state {
230 struct i2c_client *client;
231 ....
232};
233
234static int example_probe(struct i2c_client *client,
235 const struct i2c_device_id *id)
236{
237 struct example_state *state;
238 struct device *dev = &client->dev;
239
240 state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
241 if (state == NULL) {
242 dev_err(dev, "failed to create our state\n");
243 return -ENOMEM;
244 }
245
246 state->client = client;
247 i2c_set_clientdata(client, state);
248
249 /* rest of the initialisation goes here. */
250
251 dev_info(dev, "example client created\n");
252
253 return 0;
254}
255
256static int __devexit example_remove(struct i2c_client *client)
257{
258 struct example_state *state = i2c_get_clientdata(client);
259
260 kfree(state);
261 return 0;
262}
263
264static struct i2c_device_id example_idtable[] = {
265 { "example", 0 },
266 { }
267};
268
269MODULE_DEVICE_TABLE(i2c, example_idtable);
270
271static struct i2c_driver example_driver = {
272 .driver = {
273 .owner = THIS_MODULE,
274 .name = "example",
275 },
276 .id_table = example_idtable,
277 .probe = example_probe,
278 .remove = __devexit_p(example_remove),
279 .suspend = example_suspend,
280 .resume = example_resume,
281};