blob: a0289ec3e283bd532c802c05c5cba0958305828a [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Jeff Garzikaf36d7f2005-08-28 20:18:39 -04002 * libata-scsi.c - helper library for ATA
3 *
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
7 *
8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
9 * Copyright 2003-2004 Jeff Garzik
10 *
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
15 * any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
25 *
26 *
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
29 *
30 * Hardware documentation available from
31 * - http://www.t10.org/
32 * - http://www.t13.org/
33 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070034 */
35
36#include <linux/kernel.h>
37#include <linux/blkdev.h>
38#include <linux/spinlock.h>
39#include <scsi/scsi.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070040#include <scsi/scsi_host.h>
Mike Christie85837eb2005-11-11 16:38:53 -060041#include <scsi/scsi_eh.h>
Jeff Garzik005a5a02005-10-30 23:31:48 -050042#include <scsi/scsi_device.h>
Jeff Garzik193515d2005-11-07 00:59:37 -050043#include <scsi/scsi_request.h>
Tejun Heo30afc842006-03-18 18:40:14 +090044#include <scsi/scsi_transport.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070045#include <linux/libata.h>
Jeff Garzikb0955182005-05-12 15:45:22 -040046#include <linux/hdreg.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070047#include <asm/uaccess.h>
48
49#include "libata.h"
50
Jeff Garzikb0955182005-05-12 15:45:22 -040051#define SECTOR_SIZE 512
52
Jeff Garzik057ace52005-10-22 14:27:05 -040053typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
Linus Torvalds1da177e2005-04-16 15:20:36 -070054static struct ata_device *
Jeff Garzik057ace52005-10-22 14:27:05 -040055ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
Christoph Hellwig9227c332006-04-01 19:21:04 +020056static void ata_scsi_error(struct Scsi_Host *host);
Tejun Heo30afc842006-03-18 18:40:14 +090057enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
Linus Torvalds1da177e2005-04-16 15:20:36 -070058
Douglas Gilbert00ac37f2005-10-28 15:58:28 -040059#define RW_RECOVERY_MPAGE 0x1
60#define RW_RECOVERY_MPAGE_LEN 12
61#define CACHE_MPAGE 0x8
62#define CACHE_MPAGE_LEN 20
63#define CONTROL_MPAGE 0xa
64#define CONTROL_MPAGE_LEN 12
65#define ALL_MPAGES 0x3f
66#define ALL_SUB_MPAGES 0xff
67
68
69static const u8 def_rw_recovery_mpage[] = {
70 RW_RECOVERY_MPAGE,
71 RW_RECOVERY_MPAGE_LEN - 2,
72 (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */
73 (1 << 6), /* ARRE (auto read reallocation) */
74 0, /* read retry count */
75 0, 0, 0, 0,
76 0, /* write retry count */
77 0, 0, 0
78};
79
80static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = {
81 CACHE_MPAGE,
82 CACHE_MPAGE_LEN - 2,
83 0, /* contains WCE, needs to be 0 for logic */
84 0, 0, 0, 0, 0, 0, 0, 0, 0,
85 0, /* contains DRA, needs to be 0 for logic */
86 0, 0, 0, 0, 0, 0, 0
87};
88
89static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
90 CONTROL_MPAGE,
91 CONTROL_MPAGE_LEN - 2,
92 2, /* DSENSE=0, GLTSD=1 */
93 0, /* [QAM+QERR may be 1, see 05-359r1] */
94 0, 0, 0, 0, 0xff, 0xff,
95 0, 30 /* extended self test time, see 05-359r1 */
96};
97
Tejun Heo30afc842006-03-18 18:40:14 +090098/*
99 * libata transport template. libata doesn't do real transport stuff.
100 * It just needs the eh_timed_out hook.
101 */
102struct scsi_transport_template ata_scsi_transport_template = {
Christoph Hellwig9227c332006-04-01 19:21:04 +0200103 .eh_strategy_handler = ata_scsi_error,
Tejun Heo30afc842006-03-18 18:40:14 +0900104 .eh_timed_out = ata_scsi_timed_out,
105};
106
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107
Douglas Gilbertae006512005-10-09 09:09:35 -0400108static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
109 void (*done)(struct scsi_cmnd *))
110{
111 ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0);
112 /* "Invalid field in cbd" */
113 done(cmd);
114}
115
Linus Torvalds1da177e2005-04-16 15:20:36 -0700116/**
117 * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
118 * @sdev: SCSI device for which BIOS geometry is to be determined
119 * @bdev: block device associated with @sdev
120 * @capacity: capacity of SCSI device
121 * @geom: location to which geometry will be output
122 *
123 * Generic bios head/sector/cylinder calculator
124 * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS)
125 * mapping. Some situations may arise where the disk is not
126 * bootable if this is not used.
127 *
128 * LOCKING:
129 * Defined by the SCSI layer. We don't really care.
130 *
131 * RETURNS:
132 * Zero.
133 */
134int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
135 sector_t capacity, int geom[])
136{
137 geom[0] = 255;
138 geom[1] = 63;
139 sector_div(capacity, 255*63);
140 geom[2] = capacity;
141
142 return 0;
143}
144
Jeff Garzikb0955182005-05-12 15:45:22 -0400145/**
146 * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
Randy Dunlap8e8b77d2005-11-01 21:29:27 -0800147 * @scsidev: Device to which we are issuing command
Jeff Garzikb0955182005-05-12 15:45:22 -0400148 * @arg: User provided data for issuing command
149 *
150 * LOCKING:
151 * Defined by the SCSI layer. We don't really care.
152 *
153 * RETURNS:
154 * Zero on success, negative errno on error.
155 */
156
157int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
158{
159 int rc = 0;
160 u8 scsi_cmd[MAX_COMMAND_SIZE];
161 u8 args[4], *argbuf = NULL;
162 int argsize = 0;
Mike Christie85837eb2005-11-11 16:38:53 -0600163 struct scsi_sense_hdr sshdr;
164 enum dma_data_direction data_dir;
Jeff Garzikb0955182005-05-12 15:45:22 -0400165
Randy Dunlapc893a3a2006-01-28 13:15:32 -0500166 if (arg == NULL)
Jeff Garzikb0955182005-05-12 15:45:22 -0400167 return -EINVAL;
168
169 if (copy_from_user(args, arg, sizeof(args)))
170 return -EFAULT;
171
Jeff Garzikb0955182005-05-12 15:45:22 -0400172 memset(scsi_cmd, 0, sizeof(scsi_cmd));
173
174 if (args[3]) {
175 argsize = SECTOR_SIZE * args[3];
176 argbuf = kmalloc(argsize, GFP_KERNEL);
Jeff Raubitschek54dac832005-10-04 10:21:19 -0400177 if (argbuf == NULL) {
178 rc = -ENOMEM;
179 goto error;
180 }
Jeff Garzikb0955182005-05-12 15:45:22 -0400181
182 scsi_cmd[1] = (4 << 1); /* PIO Data-in */
183 scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev,
184 block count in sector count field */
Mike Christie85837eb2005-11-11 16:38:53 -0600185 data_dir = DMA_FROM_DEVICE;
Jeff Garzikb0955182005-05-12 15:45:22 -0400186 } else {
187 scsi_cmd[1] = (3 << 1); /* Non-data */
188 /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
Mike Christie85837eb2005-11-11 16:38:53 -0600189 data_dir = DMA_NONE;
Jeff Garzikb0955182005-05-12 15:45:22 -0400190 }
191
192 scsi_cmd[0] = ATA_16;
193
194 scsi_cmd[4] = args[2];
195 if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */
196 scsi_cmd[6] = args[3];
197 scsi_cmd[8] = args[1];
198 scsi_cmd[10] = 0x4f;
199 scsi_cmd[12] = 0xc2;
200 } else {
201 scsi_cmd[6] = args[1];
202 }
203 scsi_cmd[14] = args[0];
204
205 /* Good values for timeout and retries? Values below
206 from scsi_ioctl_send_command() for default case... */
Mike Christie85837eb2005-11-11 16:38:53 -0600207 if (scsi_execute_req(scsidev, scsi_cmd, data_dir, argbuf, argsize,
208 &sshdr, (10*HZ), 5)) {
Jeff Garzikb0955182005-05-12 15:45:22 -0400209 rc = -EIO;
210 goto error;
211 }
212
213 /* Need code to retrieve data from check condition? */
214
215 if ((argbuf)
Randy Dunlapc893a3a2006-01-28 13:15:32 -0500216 && copy_to_user(arg + sizeof(args), argbuf, argsize))
Jeff Garzikb0955182005-05-12 15:45:22 -0400217 rc = -EFAULT;
218error:
Jeff Garzikb0955182005-05-12 15:45:22 -0400219 if (argbuf)
220 kfree(argbuf);
221
222 return rc;
223}
224
225/**
226 * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
Randy Dunlap8e8b77d2005-11-01 21:29:27 -0800227 * @scsidev: Device to which we are issuing command
Jeff Garzikb0955182005-05-12 15:45:22 -0400228 * @arg: User provided data for issuing command
229 *
230 * LOCKING:
231 * Defined by the SCSI layer. We don't really care.
232 *
233 * RETURNS:
234 * Zero on success, negative errno on error.
235 */
236int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
237{
238 int rc = 0;
239 u8 scsi_cmd[MAX_COMMAND_SIZE];
240 u8 args[7];
Mike Christie85837eb2005-11-11 16:38:53 -0600241 struct scsi_sense_hdr sshdr;
Jeff Garzikb0955182005-05-12 15:45:22 -0400242
Randy Dunlapc893a3a2006-01-28 13:15:32 -0500243 if (arg == NULL)
Jeff Garzikb0955182005-05-12 15:45:22 -0400244 return -EINVAL;
245
246 if (copy_from_user(args, arg, sizeof(args)))
247 return -EFAULT;
248
249 memset(scsi_cmd, 0, sizeof(scsi_cmd));
250 scsi_cmd[0] = ATA_16;
251 scsi_cmd[1] = (3 << 1); /* Non-data */
252 /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
253 scsi_cmd[4] = args[1];
254 scsi_cmd[6] = args[2];
255 scsi_cmd[8] = args[3];
256 scsi_cmd[10] = args[4];
257 scsi_cmd[12] = args[5];
258 scsi_cmd[14] = args[0];
259
Jeff Garzikb0955182005-05-12 15:45:22 -0400260 /* Good values for timeout and retries? Values below
Jeff Garzik2e9edbf2006-03-24 09:56:57 -0500261 from scsi_ioctl_send_command() for default case... */
Mike Christie85837eb2005-11-11 16:38:53 -0600262 if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr,
263 (10*HZ), 5))
Jeff Garzikb0955182005-05-12 15:45:22 -0400264 rc = -EIO;
Jeff Garzikb0955182005-05-12 15:45:22 -0400265
266 /* Need code to retrieve data from check condition? */
Jeff Garzikb0955182005-05-12 15:45:22 -0400267 return rc;
268}
269
Linus Torvalds1da177e2005-04-16 15:20:36 -0700270int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
271{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700272 int val = -EINVAL, rc = -EINVAL;
273
Linus Torvalds1da177e2005-04-16 15:20:36 -0700274 switch (cmd) {
275 case ATA_IOC_GET_IO32:
276 val = 0;
277 if (copy_to_user(arg, &val, 1))
278 return -EFAULT;
279 return 0;
280
281 case ATA_IOC_SET_IO32:
282 val = (unsigned long) arg;
283 if (val != 0)
284 return -EINVAL;
285 return 0;
286
Jeff Garzikb0955182005-05-12 15:45:22 -0400287 case HDIO_DRIVE_CMD:
288 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
289 return -EACCES;
290 return ata_cmd_ioctl(scsidev, arg);
291
292 case HDIO_DRIVE_TASK:
293 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
294 return -EACCES;
295 return ata_task_ioctl(scsidev, arg);
296
Linus Torvalds1da177e2005-04-16 15:20:36 -0700297 default:
298 rc = -ENOTTY;
299 break;
300 }
301
Linus Torvalds1da177e2005-04-16 15:20:36 -0700302 return rc;
303}
304
305/**
306 * ata_scsi_qc_new - acquire new ata_queued_cmd reference
307 * @ap: ATA port to which the new command is attached
308 * @dev: ATA device to which the new command is attached
309 * @cmd: SCSI command that originated this ATA command
310 * @done: SCSI command completion function
311 *
312 * Obtain a reference to an unused ata_queued_cmd structure,
313 * which is the basic libata structure representing a single
314 * ATA command sent to the hardware.
315 *
316 * If a command was available, fill in the SCSI-specific
317 * portions of the structure with information on the
318 * current command.
319 *
320 * LOCKING:
321 * spin_lock_irqsave(host_set lock)
322 *
323 * RETURNS:
324 * Command allocated, or %NULL if none available.
325 */
326struct ata_queued_cmd *ata_scsi_qc_new(struct ata_port *ap,
327 struct ata_device *dev,
328 struct scsi_cmnd *cmd,
329 void (*done)(struct scsi_cmnd *))
330{
331 struct ata_queued_cmd *qc;
332
333 qc = ata_qc_new_init(ap, dev);
334 if (qc) {
335 qc->scsicmd = cmd;
336 qc->scsidone = done;
337
338 if (cmd->use_sg) {
Jeff Garzikcedc9a42005-10-05 07:13:30 -0400339 qc->__sg = (struct scatterlist *) cmd->request_buffer;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700340 qc->n_elem = cmd->use_sg;
341 } else {
Jeff Garzikcedc9a42005-10-05 07:13:30 -0400342 qc->__sg = &qc->sgent;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700343 qc->n_elem = 1;
344 }
345 } else {
346 cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
347 done(cmd);
348 }
349
350 return qc;
351}
352
353/**
Jeff Garzikb0955182005-05-12 15:45:22 -0400354 * ata_dump_status - user friendly display of error info
355 * @id: id of the port in question
356 * @tf: ptr to filled out taskfile
Linus Torvalds1da177e2005-04-16 15:20:36 -0700357 *
Jeff Garzikb0955182005-05-12 15:45:22 -0400358 * Decode and dump the ATA error/status registers for the user so
359 * that they have some idea what really happened at the non
360 * make-believe layer.
361 *
362 * LOCKING:
363 * inherited from caller
364 */
365void ata_dump_status(unsigned id, struct ata_taskfile *tf)
366{
367 u8 stat = tf->command, err = tf->feature;
368
369 printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat);
370 if (stat & ATA_BUSY) {
371 printk("Busy }\n"); /* Data is not valid in this case */
372 } else {
373 if (stat & 0x40) printk("DriveReady ");
374 if (stat & 0x20) printk("DeviceFault ");
375 if (stat & 0x10) printk("SeekComplete ");
376 if (stat & 0x08) printk("DataRequest ");
377 if (stat & 0x04) printk("CorrectedError ");
378 if (stat & 0x02) printk("Index ");
379 if (stat & 0x01) printk("Error ");
380 printk("}\n");
381
382 if (err) {
383 printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
384 if (err & 0x04) printk("DriveStatusError ");
385 if (err & 0x80) {
386 if (err & 0x04) printk("BadCRC ");
387 else printk("Sector ");
388 }
389 if (err & 0x40) printk("UncorrectableError ");
390 if (err & 0x10) printk("SectorIdNotFound ");
391 if (err & 0x02) printk("TrackZeroNotFound ");
392 if (err & 0x01) printk("AddrMarkNotFound ");
393 printk("}\n");
394 }
395 }
396}
397
Jens Axboe9b847542006-01-06 09:28:07 +0100398int ata_scsi_device_resume(struct scsi_device *sdev)
399{
400 struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
401 struct ata_device *dev = &ap->device[sdev->id];
402
403 return ata_device_resume(ap, dev);
404}
405
Nigel Cunningham082776e2006-03-23 23:22:16 +1000406int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
Jens Axboe9b847542006-01-06 09:28:07 +0100407{
408 struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
409 struct ata_device *dev = &ap->device[sdev->id];
410
Nigel Cunningham082776e2006-03-23 23:22:16 +1000411 return ata_device_suspend(ap, dev, state);
Jens Axboe9b847542006-01-06 09:28:07 +0100412}
413
Jeff Garzikb0955182005-05-12 15:45:22 -0400414/**
415 * ata_to_sense_error - convert ATA error to SCSI error
Randy Dunlap8e8b77d2005-11-01 21:29:27 -0800416 * @id: ATA device number
Jeff Garzikb0955182005-05-12 15:45:22 -0400417 * @drv_stat: value contained in ATA status register
418 * @drv_err: value contained in ATA error register
419 * @sk: the sense key we'll fill out
420 * @asc: the additional sense code we'll fill out
421 * @ascq: the additional sense code qualifier we'll fill out
422 *
423 * Converts an ATA error into a SCSI error. Fill out pointers to
424 * SK, ASC, and ASCQ bytes for later use in fixed or descriptor
425 * format sense blocks.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700426 *
427 * LOCKING:
428 * spin_lock_irqsave(host_set lock)
429 */
Jeff Garzik2e9edbf2006-03-24 09:56:57 -0500430void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
Jeff Garzikb0955182005-05-12 15:45:22 -0400431 u8 *ascq)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700432{
Jeff Garzikb0955182005-05-12 15:45:22 -0400433 int i;
Jeff Garzikffe75ef2005-10-09 10:40:44 -0400434
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435 /* Based on the 3ware driver translation table */
Arjan van de Ven98ac62d2005-11-28 10:06:23 +0100436 static const unsigned char sense_table[][4] = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700437 /* BBD|ECC|ID|MAR */
438 {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command
439 /* BBD|ECC|ID */
440 {0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command
441 /* ECC|MC|MARK */
442 {0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error
443 /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */
444 {0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error
445 /* MC|ID|ABRT|TRK0|MARK */
446 {0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready
447 /* MCR|MARK */
448 {0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready
449 /* Bad address mark */
450 {0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field
451 /* TRK0 */
452 {0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error
453 /* Abort & !ICRC */
454 {0x04, ABORTED_COMMAND, 0x00, 0x00}, // Aborted command Aborted command
455 /* Media change request */
456 {0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline
457 /* SRV */
458 {0x10, ABORTED_COMMAND, 0x14, 0x00}, // ID not found Recorded entity not found
459 /* Media change */
460 {0x08, NOT_READY, 0x04, 0x00}, // Media change FIXME: faking offline
461 /* ECC */
462 {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error
463 /* BBD - block marked bad */
464 {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error
465 {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
466 };
Arjan van de Ven98ac62d2005-11-28 10:06:23 +0100467 static const unsigned char stat_table[][4] = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700468 /* Must be first because BUSY means no other bits valid */
469 {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now
470 {0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault
471 {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now
472 {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
473 {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
474 };
Linus Torvalds1da177e2005-04-16 15:20:36 -0700475
Linus Torvalds1da177e2005-04-16 15:20:36 -0700476 /*
477 * Is this an error we can process/parse
478 */
Jeff Garzikb0955182005-05-12 15:45:22 -0400479 if (drv_stat & ATA_BUSY) {
480 drv_err = 0; /* Ignore the err bits, they're invalid */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700481 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700482
Jeff Garzikb0955182005-05-12 15:45:22 -0400483 if (drv_err) {
484 /* Look for drv_err */
485 for (i = 0; sense_table[i][0] != 0xFF; i++) {
486 /* Look for best matches first */
Jeff Garzik2e9edbf2006-03-24 09:56:57 -0500487 if ((sense_table[i][0] & drv_err) ==
Jeff Garzikb0955182005-05-12 15:45:22 -0400488 sense_table[i][0]) {
489 *sk = sense_table[i][1];
490 *asc = sense_table[i][2];
491 *ascq = sense_table[i][3];
492 goto translate_done;
493 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700494 }
Jeff Garzikb0955182005-05-12 15:45:22 -0400495 /* No immediate match */
496 printk(KERN_WARNING "ata%u: no sense translation for "
497 "error 0x%02x\n", id, drv_err);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700498 }
499
Linus Torvalds1da177e2005-04-16 15:20:36 -0700500 /* Fall back to interpreting status bits */
Jeff Garzikb0955182005-05-12 15:45:22 -0400501 for (i = 0; stat_table[i][0] != 0xFF; i++) {
502 if (stat_table[i][0] & drv_stat) {
503 *sk = stat_table[i][1];
504 *asc = stat_table[i][2];
505 *ascq = stat_table[i][3];
506 goto translate_done;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700507 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700508 }
Jeff Garzikb0955182005-05-12 15:45:22 -0400509 /* No error? Undecoded? */
Jeff Garzik2e9edbf2006-03-24 09:56:57 -0500510 printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
Jeff Garzikb0955182005-05-12 15:45:22 -0400511 id, drv_stat);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512
Alan Cox2d202022006-03-21 15:53:46 +0000513 /* We need a sensible error return here, which is tricky, and one
514 that won't cause people to do things like return a disk wrongly */
515 *sk = ABORTED_COMMAND;
516 *asc = 0x00;
517 *ascq = 0x00;
Jeff Garzikb0955182005-05-12 15:45:22 -0400518
519 translate_done:
520 printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to "
521 "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err,
522 *sk, *asc, *ascq);
523 return;
524}
525
526/*
527 * ata_gen_ata_desc_sense - Generate check condition sense block.
528 * @qc: Command that completed.
529 *
530 * This function is specific to the ATA descriptor format sense
531 * block specified for the ATA pass through commands. Regardless
532 * of whether the command errored or not, return a sense
533 * block. Copy all controller registers into the sense
534 * block. Clear sense key, ASC & ASCQ if there is no error.
535 *
536 * LOCKING:
537 * spin_lock_irqsave(host_set lock)
538 */
539void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
540{
541 struct scsi_cmnd *cmd = qc->scsicmd;
542 struct ata_taskfile *tf = &qc->tf;
543 unsigned char *sb = cmd->sense_buffer;
544 unsigned char *desc = sb + 8;
545
546 memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
547
Jeff Garzik0e5dec42005-10-06 09:40:20 -0400548 cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
Jeff Garzikb0955182005-05-12 15:45:22 -0400549
550 /*
551 * Read the controller registers.
552 */
Tejun Heoa46314742006-02-11 19:11:13 +0900553 WARN_ON(qc->ap->ops->tf_read == NULL);
Jeff Garzikb0955182005-05-12 15:45:22 -0400554 qc->ap->ops->tf_read(qc->ap, tf);
555
556 /*
557 * Use ata_to_sense_error() to map status register bits
558 * onto sense key, asc & ascq.
559 */
Jeff Garzika7dac442005-10-30 04:44:42 -0500560 if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
Jeff Garzikb0955182005-05-12 15:45:22 -0400561 ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
562 &sb[1], &sb[2], &sb[3]);
563 sb[1] &= 0x0f;
564 }
565
566 /*
567 * Sense data is current and format is descriptor.
568 */
569 sb[0] = 0x72;
570
571 desc[0] = 0x09;
572
573 /*
574 * Set length of additional sense data.
575 * Since we only populate descriptor 0, the total
576 * length is the same (fixed) length as descriptor 0.
577 */
578 desc[1] = sb[7] = 14;
579
580 /*
581 * Copy registers into sense buffer.
582 */
583 desc[2] = 0x00;
584 desc[3] = tf->feature; /* == error reg */
585 desc[5] = tf->nsect;
586 desc[7] = tf->lbal;
587 desc[9] = tf->lbam;
588 desc[11] = tf->lbah;
589 desc[12] = tf->device;
590 desc[13] = tf->command; /* == status reg */
591
592 /*
593 * Fill in Extend bit, and the high order bytes
594 * if applicable.
595 */
596 if (tf->flags & ATA_TFLAG_LBA48) {
597 desc[2] |= 0x01;
598 desc[4] = tf->hob_nsect;
599 desc[6] = tf->hob_lbal;
600 desc[8] = tf->hob_lbam;
601 desc[10] = tf->hob_lbah;
602 }
603}
604
605/**
606 * ata_gen_fixed_sense - generate a SCSI fixed sense block
607 * @qc: Command that we are erroring out
608 *
609 * Leverage ata_to_sense_error() to give us the codes. Fit our
610 * LBA in here if there's room.
611 *
612 * LOCKING:
613 * inherited from caller
614 */
615void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
616{
617 struct scsi_cmnd *cmd = qc->scsicmd;
618 struct ata_taskfile *tf = &qc->tf;
619 unsigned char *sb = cmd->sense_buffer;
620
621 memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
622
Jeff Garzik0e5dec42005-10-06 09:40:20 -0400623 cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
Jeff Garzikb0955182005-05-12 15:45:22 -0400624
625 /*
626 * Read the controller registers.
627 */
Tejun Heoa46314742006-02-11 19:11:13 +0900628 WARN_ON(qc->ap->ops->tf_read == NULL);
Jeff Garzikb0955182005-05-12 15:45:22 -0400629 qc->ap->ops->tf_read(qc->ap, tf);
630
631 /*
632 * Use ata_to_sense_error() to map status register bits
633 * onto sense key, asc & ascq.
634 */
Jeff Garzika7dac442005-10-30 04:44:42 -0500635 if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
Jeff Garzikb0955182005-05-12 15:45:22 -0400636 ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
637 &sb[2], &sb[12], &sb[13]);
638 sb[2] &= 0x0f;
639 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700640
641 sb[0] = 0x70;
Jeff Garzikb0955182005-05-12 15:45:22 -0400642 sb[7] = 0x0a;
Jeff Garzik0274aa22005-06-22 13:50:56 -0400643
Jeff Garzika7dac442005-10-30 04:44:42 -0500644 if (tf->flags & ATA_TFLAG_LBA48) {
645 /* TODO: find solution for LBA48 descriptors */
646 }
647
648 else if (tf->flags & ATA_TFLAG_LBA) {
Jeff Garzikb0955182005-05-12 15:45:22 -0400649 /* A small (28b) LBA will fit in the 32b info field */
650 sb[0] |= 0x80; /* set valid bit */
651 sb[3] = tf->device & 0x0f;
652 sb[4] = tf->lbah;
653 sb[5] = tf->lbam;
654 sb[6] = tf->lbal;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700655 }
Jeff Garzika7dac442005-10-30 04:44:42 -0500656
657 else {
658 /* TODO: C/H/S */
659 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700660}
661
Brian Kinga6cce2a2006-03-17 17:04:15 -0600662static void ata_scsi_sdev_config(struct scsi_device *sdev)
663{
664 sdev->use_10_for_rw = 1;
665 sdev->use_10_for_ms = 1;
666}
667
668static void ata_scsi_dev_config(struct scsi_device *sdev,
669 struct ata_device *dev)
670{
671 unsigned int max_sectors;
672
673 /* TODO: 2048 is an arbitrary number, not the
674 * hardware maximum. This should be increased to
675 * 65534 when Jens Axboe's patch for dynamically
676 * determining max_sectors is merged.
677 */
678 max_sectors = ATA_MAX_SECTORS;
679 if (dev->flags & ATA_DFLAG_LBA48)
680 max_sectors = 2048;
681 if (dev->max_sectors)
682 max_sectors = dev->max_sectors;
683
684 blk_queue_max_sectors(sdev->request_queue, max_sectors);
685
686 /*
687 * SATA DMA transfers must be multiples of 4 byte, so
688 * we need to pad ATAPI transfers using an extra sg.
689 * Decrement max hw segments accordingly.
690 */
691 if (dev->class == ATA_DEV_ATAPI) {
692 request_queue_t *q = sdev->request_queue;
693 blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
694 }
695}
696
Linus Torvalds1da177e2005-04-16 15:20:36 -0700697/**
698 * ata_scsi_slave_config - Set SCSI device attributes
699 * @sdev: SCSI device to examine
700 *
701 * This is called before we actually start reading
702 * and writing to the device, to configure certain
703 * SCSI mid-layer behaviors.
704 *
705 * LOCKING:
706 * Defined by SCSI layer. We don't really care.
707 */
708
709int ata_scsi_slave_config(struct scsi_device *sdev)
710{
Brian Kinga6cce2a2006-03-17 17:04:15 -0600711 ata_scsi_sdev_config(sdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700712
713 blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
714
715 if (sdev->id < ATA_MAX_DEVICES) {
716 struct ata_port *ap;
717 struct ata_device *dev;
718
719 ap = (struct ata_port *) &sdev->host->hostdata[0];
720 dev = &ap->device[sdev->id];
721
Brian Kinga6cce2a2006-03-17 17:04:15 -0600722 ata_scsi_dev_config(sdev, dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700723 }
724
725 return 0; /* scsi layer doesn't check return value, sigh */
726}
727
728/**
Tejun Heof29841e2006-02-10 15:10:48 +0900729 * ata_scsi_timed_out - SCSI layer time out callback
730 * @cmd: timed out SCSI command
731 *
732 * Handles SCSI layer timeout. We race with normal completion of
733 * the qc for @cmd. If the qc is already gone, we lose and let
734 * the scsi command finish (EH_HANDLED). Otherwise, the qc has
735 * timed out and EH should be invoked. Prevent ata_qc_complete()
736 * from finishing it by setting EH_SCHEDULED and return
737 * EH_NOT_HANDLED.
738 *
739 * LOCKING:
740 * Called from timer context
741 *
742 * RETURNS:
743 * EH_HANDLED or EH_NOT_HANDLED
744 */
745enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
746{
747 struct Scsi_Host *host = cmd->device->host;
748 struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
749 unsigned long flags;
750 struct ata_queued_cmd *qc;
751 enum scsi_eh_timer_return ret = EH_HANDLED;
752
753 DPRINTK("ENTER\n");
754
755 spin_lock_irqsave(&ap->host_set->lock, flags);
756 qc = ata_qc_from_tag(ap, ap->active_tag);
757 if (qc) {
Tejun Heoa46314742006-02-11 19:11:13 +0900758 WARN_ON(qc->scsicmd != cmd);
Tejun Heof29841e2006-02-10 15:10:48 +0900759 qc->flags |= ATA_QCFLAG_EH_SCHEDULED;
760 qc->err_mask |= AC_ERR_TIMEOUT;
761 ret = EH_NOT_HANDLED;
762 }
763 spin_unlock_irqrestore(&ap->host_set->lock, flags);
764
765 DPRINTK("EXIT, ret=%d\n", ret);
766 return ret;
767}
768
769/**
Linus Torvalds1da177e2005-04-16 15:20:36 -0700770 * ata_scsi_error - SCSI layer error handler callback
771 * @host: SCSI host on which error occurred
772 *
773 * Handles SCSI-layer-thrown error events.
774 *
775 * LOCKING:
776 * Inherited from SCSI layer (none, can sleep)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700777 */
778
Christoph Hellwig9227c332006-04-01 19:21:04 +0200779static void ata_scsi_error(struct Scsi_Host *host)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700780{
781 struct ata_port *ap;
Jeff Garzik51407882006-02-09 01:56:05 -0500782 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700783
784 DPRINTK("ENTER\n");
785
Jeff Garzik51407882006-02-09 01:56:05 -0500786 ap = (struct ata_port *) &host->hostdata[0];
787
Tejun Heodde44582006-02-02 00:56:10 +0900788 spin_lock_irqsave(&ap->host_set->lock, flags);
Tejun Heoa46314742006-02-11 19:11:13 +0900789 WARN_ON(ap->flags & ATA_FLAG_IN_EH);
Tejun Heodde44582006-02-02 00:56:10 +0900790 ap->flags |= ATA_FLAG_IN_EH;
Tejun Heoa46314742006-02-11 19:11:13 +0900791 WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
Tejun Heodde44582006-02-02 00:56:10 +0900792 spin_unlock_irqrestore(&ap->host_set->lock, flags);
793
Tejun Heo86e45b62006-03-05 15:29:09 +0900794 ata_port_flush_task(ap);
795
Linus Torvalds1da177e2005-04-16 15:20:36 -0700796 ap->ops->eng_timeout(ap);
797
Tejun Heoa46314742006-02-11 19:11:13 +0900798 WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
Tejun Heoa72ec4c2006-01-23 13:09:37 +0900799
800 scsi_eh_flush_done_q(&ap->eh_done_q);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700801
Tejun Heodde44582006-02-02 00:56:10 +0900802 spin_lock_irqsave(&ap->host_set->lock, flags);
803 ap->flags &= ~ATA_FLAG_IN_EH;
804 spin_unlock_irqrestore(&ap->host_set->lock, flags);
805
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 DPRINTK("EXIT\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700807}
808
Tejun Heoa72ec4c2006-01-23 13:09:37 +0900809static void ata_eh_scsidone(struct scsi_cmnd *scmd)
810{
811 /* nada */
812}
813
814static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
815{
816 struct ata_port *ap = qc->ap;
817 struct scsi_cmnd *scmd = qc->scsicmd;
818 unsigned long flags;
819
820 spin_lock_irqsave(&ap->host_set->lock, flags);
821 qc->scsidone = ata_eh_scsidone;
Tejun Heo341963b2006-02-10 15:10:48 +0900822 __ata_qc_complete(qc);
Tejun Heoa46314742006-02-11 19:11:13 +0900823 WARN_ON(ata_tag_valid(qc->tag));
Tejun Heoa72ec4c2006-01-23 13:09:37 +0900824 spin_unlock_irqrestore(&ap->host_set->lock, flags);
825
826 scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
827}
828
829/**
830 * ata_eh_qc_complete - Complete an active ATA command from EH
831 * @qc: Command to complete
832 *
833 * Indicate to the mid and upper layers that an ATA command has
834 * completed. To be used from EH.
835 */
836void ata_eh_qc_complete(struct ata_queued_cmd *qc)
837{
838 struct scsi_cmnd *scmd = qc->scsicmd;
839 scmd->retries = scmd->allowed;
840 __ata_eh_qc_complete(qc);
841}
842
843/**
844 * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
845 * @qc: Command to retry
846 *
847 * Indicate to the mid and upper layers that an ATA command
848 * should be retried. To be used from EH.
849 *
850 * SCSI midlayer limits the number of retries to scmd->allowed.
851 * This function might need to adjust scmd->retries for commands
852 * which get retried due to unrelated NCQ failures.
853 */
854void ata_eh_qc_retry(struct ata_queued_cmd *qc)
855{
856 __ata_eh_qc_complete(qc);
857}
858
Linus Torvalds1da177e2005-04-16 15:20:36 -0700859/**
Douglas Gilbert972dcaf2005-08-11 03:35:53 -0400860 * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
861 * @qc: Storage for translated ATA taskfile
862 * @scsicmd: SCSI command to translate
863 *
864 * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
865 * (to start). Perhaps these commands should be preceded by
866 * CHECK POWER MODE to see what power mode the device is already in.
867 * [See SAT revision 5 at www.t10.org]
868 *
869 * LOCKING:
870 * spin_lock_irqsave(host_set lock)
871 *
872 * RETURNS:
873 * Zero on success, non-zero on error.
874 */
875
876static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
Jeff Garzik057ace52005-10-22 14:27:05 -0400877 const u8 *scsicmd)
Douglas Gilbert972dcaf2005-08-11 03:35:53 -0400878{
879 struct ata_taskfile *tf = &qc->tf;
880
881 tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
882 tf->protocol = ATA_PROT_NODATA;
883 if (scsicmd[1] & 0x1) {
884 ; /* ignore IMMED bit, violates sat-r05 */
885 }
886 if (scsicmd[4] & 0x2)
Douglas Gilbertae006512005-10-09 09:09:35 -0400887 goto invalid_fld; /* LOEJ bit set not supported */
Douglas Gilbert972dcaf2005-08-11 03:35:53 -0400888 if (((scsicmd[4] >> 4) & 0xf) != 0)
Douglas Gilbertae006512005-10-09 09:09:35 -0400889 goto invalid_fld; /* power conditions not supported */
Douglas Gilbert972dcaf2005-08-11 03:35:53 -0400890 if (scsicmd[4] & 0x1) {
891 tf->nsect = 1; /* 1 sector, lba=0 */
Albert Lee9d5b1302005-10-04 08:48:17 -0400892
893 if (qc->dev->flags & ATA_DFLAG_LBA) {
894 qc->tf.flags |= ATA_TFLAG_LBA;
895
896 tf->lbah = 0x0;
897 tf->lbam = 0x0;
898 tf->lbal = 0x0;
899 tf->device |= ATA_LBA;
900 } else {
901 /* CHS */
902 tf->lbal = 0x1; /* sect */
903 tf->lbam = 0x0; /* cyl low */
904 tf->lbah = 0x0; /* cyl high */
905 }
906
Douglas Gilbert972dcaf2005-08-11 03:35:53 -0400907 tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
908 } else {
909 tf->nsect = 0; /* time period value (0 implies now) */
910 tf->command = ATA_CMD_STANDBY;
911 /* Consider: ATA STANDBY IMMEDIATE command */
912 }
913 /*
914 * Standby and Idle condition timers could be implemented but that
915 * would require libata to implement the Power condition mode page
916 * and allow the user to change it. Changing mode pages requires
917 * MODE SELECT to be implemented.
918 */
919
920 return 0;
Douglas Gilbertae006512005-10-09 09:09:35 -0400921
922invalid_fld:
923 ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
924 /* "Invalid field in cbd" */
925 return 1;
Douglas Gilbert972dcaf2005-08-11 03:35:53 -0400926}
927
928
929/**
Linus Torvalds1da177e2005-04-16 15:20:36 -0700930 * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
931 * @qc: Storage for translated ATA taskfile
932 * @scsicmd: SCSI command to translate (ignored)
933 *
934 * Sets up an ATA taskfile to issue FLUSH CACHE or
935 * FLUSH CACHE EXT.
936 *
937 * LOCKING:
938 * spin_lock_irqsave(host_set lock)
939 *
940 * RETURNS:
941 * Zero on success, non-zero on error.
942 */
943
Jeff Garzik057ace52005-10-22 14:27:05 -0400944static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700945{
946 struct ata_taskfile *tf = &qc->tf;
947
948 tf->flags |= ATA_TFLAG_DEVICE;
949 tf->protocol = ATA_PROT_NODATA;
950
Albert Lee07506692005-10-12 15:04:18 +0800951 if ((qc->dev->flags & ATA_DFLAG_LBA48) &&
Linus Torvalds1da177e2005-04-16 15:20:36 -0700952 (ata_id_has_flush_ext(qc->dev->id)))
953 tf->command = ATA_CMD_FLUSH_EXT;
954 else
955 tf->command = ATA_CMD_FLUSH;
956
957 return 0;
958}
959
960/**
Albert Lee3aef5232005-10-04 08:47:43 -0400961 * scsi_6_lba_len - Get LBA and transfer length
962 * @scsicmd: SCSI command to translate
963 *
964 * Calculate LBA and transfer length for 6-byte commands.
965 *
966 * RETURNS:
967 * @plba: the LBA
968 * @plen: the transfer length
969 */
970
Jeff Garzik057ace52005-10-22 14:27:05 -0400971static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
Albert Lee3aef5232005-10-04 08:47:43 -0400972{
973 u64 lba = 0;
974 u32 len = 0;
975
976 VPRINTK("six-byte command\n");
977
978 lba |= ((u64)scsicmd[2]) << 8;
979 lba |= ((u64)scsicmd[3]);
980
981 len |= ((u32)scsicmd[4]);
982
983 *plba = lba;
984 *plen = len;
985}
986
987/**
988 * scsi_10_lba_len - Get LBA and transfer length
989 * @scsicmd: SCSI command to translate
990 *
991 * Calculate LBA and transfer length for 10-byte commands.
992 *
993 * RETURNS:
994 * @plba: the LBA
995 * @plen: the transfer length
996 */
997
Jeff Garzik057ace52005-10-22 14:27:05 -0400998static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
Albert Lee3aef5232005-10-04 08:47:43 -0400999{
1000 u64 lba = 0;
1001 u32 len = 0;
1002
1003 VPRINTK("ten-byte command\n");
1004
1005 lba |= ((u64)scsicmd[2]) << 24;
1006 lba |= ((u64)scsicmd[3]) << 16;
1007 lba |= ((u64)scsicmd[4]) << 8;
1008 lba |= ((u64)scsicmd[5]);
1009
1010 len |= ((u32)scsicmd[7]) << 8;
1011 len |= ((u32)scsicmd[8]);
1012
1013 *plba = lba;
1014 *plen = len;
1015}
1016
1017/**
1018 * scsi_16_lba_len - Get LBA and transfer length
1019 * @scsicmd: SCSI command to translate
1020 *
1021 * Calculate LBA and transfer length for 16-byte commands.
1022 *
1023 * RETURNS:
1024 * @plba: the LBA
1025 * @plen: the transfer length
1026 */
1027
Jeff Garzik057ace52005-10-22 14:27:05 -04001028static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
Albert Lee3aef5232005-10-04 08:47:43 -04001029{
1030 u64 lba = 0;
1031 u32 len = 0;
1032
1033 VPRINTK("sixteen-byte command\n");
1034
1035 lba |= ((u64)scsicmd[2]) << 56;
1036 lba |= ((u64)scsicmd[3]) << 48;
1037 lba |= ((u64)scsicmd[4]) << 40;
1038 lba |= ((u64)scsicmd[5]) << 32;
1039 lba |= ((u64)scsicmd[6]) << 24;
1040 lba |= ((u64)scsicmd[7]) << 16;
1041 lba |= ((u64)scsicmd[8]) << 8;
1042 lba |= ((u64)scsicmd[9]);
1043
1044 len |= ((u32)scsicmd[10]) << 24;
1045 len |= ((u32)scsicmd[11]) << 16;
1046 len |= ((u32)scsicmd[12]) << 8;
1047 len |= ((u32)scsicmd[13]);
1048
1049 *plba = lba;
1050 *plen = len;
1051}
1052
1053/**
Linus Torvalds1da177e2005-04-16 15:20:36 -07001054 * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
1055 * @qc: Storage for translated ATA taskfile
1056 * @scsicmd: SCSI command to translate
1057 *
1058 * Converts SCSI VERIFY command to an ATA READ VERIFY command.
1059 *
1060 * LOCKING:
1061 * spin_lock_irqsave(host_set lock)
1062 *
1063 * RETURNS:
1064 * Zero on success, non-zero on error.
1065 */
1066
Jeff Garzik057ace52005-10-22 14:27:05 -04001067static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001068{
1069 struct ata_taskfile *tf = &qc->tf;
Albert Lee8bf62ece2005-05-12 15:29:42 -04001070 struct ata_device *dev = qc->dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001071 u64 dev_sectors = qc->dev->n_sectors;
Albert Lee3aef5232005-10-04 08:47:43 -04001072 u64 block;
1073 u32 n_block;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001074
1075 tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
1076 tf->protocol = ATA_PROT_NODATA;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001077
Albert Lee3aef5232005-10-04 08:47:43 -04001078 if (scsicmd[0] == VERIFY)
1079 scsi_10_lba_len(scsicmd, &block, &n_block);
1080 else if (scsicmd[0] == VERIFY_16)
1081 scsi_16_lba_len(scsicmd, &block, &n_block);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001082 else
Douglas Gilbertae006512005-10-09 09:09:35 -04001083 goto invalid_fld;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001084
Albert Lee8bf62ece2005-05-12 15:29:42 -04001085 if (!n_block)
Douglas Gilbertae006512005-10-09 09:09:35 -04001086 goto nothing_to_do;
Albert Lee8bf62ece2005-05-12 15:29:42 -04001087 if (block >= dev_sectors)
Douglas Gilbertae006512005-10-09 09:09:35 -04001088 goto out_of_range;
Albert Lee8bf62ece2005-05-12 15:29:42 -04001089 if ((block + n_block) > dev_sectors)
Douglas Gilbertae006512005-10-09 09:09:35 -04001090 goto out_of_range;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001091
Albert Lee07506692005-10-12 15:04:18 +08001092 if (dev->flags & ATA_DFLAG_LBA) {
1093 tf->flags |= ATA_TFLAG_LBA;
1094
Albert Leec6a33e22005-10-12 15:12:26 +08001095 if (lba_28_ok(block, n_block)) {
1096 /* use LBA28 */
1097 tf->command = ATA_CMD_VERIFY;
1098 tf->device |= (block >> 24) & 0xf;
1099 } else if (lba_48_ok(block, n_block)) {
1100 if (!(dev->flags & ATA_DFLAG_LBA48))
1101 goto out_of_range;
Albert Lee07506692005-10-12 15:04:18 +08001102
1103 /* use LBA48 */
1104 tf->flags |= ATA_TFLAG_LBA48;
Albert Lee8bf62ece2005-05-12 15:29:42 -04001105 tf->command = ATA_CMD_VERIFY_EXT;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001106
Albert Lee8bf62ece2005-05-12 15:29:42 -04001107 tf->hob_nsect = (n_block >> 8) & 0xff;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108
Albert Lee8bf62ece2005-05-12 15:29:42 -04001109 tf->hob_lbah = (block >> 40) & 0xff;
1110 tf->hob_lbam = (block >> 32) & 0xff;
1111 tf->hob_lbal = (block >> 24) & 0xff;
Albert Leec6a33e22005-10-12 15:12:26 +08001112 } else
1113 /* request too large even for LBA48 */
1114 goto out_of_range;
Albert Lee8bf62ece2005-05-12 15:29:42 -04001115
1116 tf->nsect = n_block & 0xff;
1117
1118 tf->lbah = (block >> 16) & 0xff;
1119 tf->lbam = (block >> 8) & 0xff;
1120 tf->lbal = block & 0xff;
1121
1122 tf->device |= ATA_LBA;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001123 } else {
Albert Lee8bf62ece2005-05-12 15:29:42 -04001124 /* CHS */
1125 u32 sect, head, cyl, track;
1126
Albert Leec6a33e22005-10-12 15:12:26 +08001127 if (!lba_28_ok(block, n_block))
1128 goto out_of_range;
Albert Lee07506692005-10-12 15:04:18 +08001129
Albert Lee8bf62ece2005-05-12 15:29:42 -04001130 /* Convert LBA to CHS */
1131 track = (u32)block / dev->sectors;
1132 cyl = track / dev->heads;
1133 head = track % dev->heads;
1134 sect = (u32)block % dev->sectors + 1;
1135
Albert Leec187c4b2005-10-04 08:46:51 -04001136 DPRINTK("block %u track %u cyl %u head %u sect %u\n",
1137 (u32)block, track, cyl, head, sect);
Jeff Garzik2e9edbf2006-03-24 09:56:57 -05001138
1139 /* Check whether the converted CHS can fit.
1140 Cylinder: 0-65535
Albert Lee8bf62ece2005-05-12 15:29:42 -04001141 Head: 0-15
1142 Sector: 1-255*/
Jeff Garzik2e9edbf2006-03-24 09:56:57 -05001143 if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
Douglas Gilbertae006512005-10-09 09:09:35 -04001144 goto out_of_range;
Jeff Garzik2e9edbf2006-03-24 09:56:57 -05001145
Linus Torvalds1da177e2005-04-16 15:20:36 -07001146 tf->command = ATA_CMD_VERIFY;
Albert Lee8bf62ece2005-05-12 15:29:42 -04001147 tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
1148 tf->lbal = sect;
1149 tf->lbam = cyl;
1150 tf->lbah = cyl >> 8;
1151 tf->device |= head;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001152 }
1153
Linus Torvalds1da177e2005-04-16 15:20:36 -07001154 return 0;
Douglas Gilbertae006512005-10-09 09:09:35 -04001155
1156invalid_fld:
1157 ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
1158 /* "Invalid field in cbd" */
1159 return 1;
1160
1161out_of_range:
1162 ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
1163 /* "Logical Block Address out of range" */
1164 return 1;
1165
1166nothing_to_do:
1167 qc->scsicmd->result = SAM_STAT_GOOD;
1168 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001169}
1170
1171/**
1172 * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one
1173 * @qc: Storage for translated ATA taskfile
1174 * @scsicmd: SCSI command to translate
1175 *
1176 * Converts any of six SCSI read/write commands into the
1177 * ATA counterpart, including starting sector (LBA),
1178 * sector count, and taking into account the device's LBA48
1179 * support.
1180 *
1181 * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and
1182 * %WRITE_16 are currently supported.
1183 *
1184 * LOCKING:
1185 * spin_lock_irqsave(host_set lock)
1186 *
1187 * RETURNS:
1188 * Zero on success, non-zero on error.
1189 */
1190
Jeff Garzik057ace52005-10-22 14:27:05 -04001191static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001192{
1193 struct ata_taskfile *tf = &qc->tf;
Albert Lee8bf62ece2005-05-12 15:29:42 -04001194 struct ata_device *dev = qc->dev;
Albert Lee3aef5232005-10-04 08:47:43 -04001195 u64 block;
1196 u32 n_block;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001197
1198 tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001199
Albert Lee8cbd6df2005-10-12 15:06:27 +08001200 if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 ||
1201 scsicmd[0] == WRITE_16)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001202 tf->flags |= ATA_TFLAG_WRITE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001203
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001204 /* Calculate the SCSI LBA, transfer length and FUA. */
Albert Lee3aef5232005-10-04 08:47:43 -04001205 switch (scsicmd[0]) {
1206 case READ_10:
1207 case WRITE_10:
1208 scsi_10_lba_len(scsicmd, &block, &n_block);
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001209 if (unlikely(scsicmd[1] & (1 << 3)))
1210 tf->flags |= ATA_TFLAG_FUA;
Albert Lee3aef5232005-10-04 08:47:43 -04001211 break;
1212 case READ_6:
1213 case WRITE_6:
1214 scsi_6_lba_len(scsicmd, &block, &n_block);
Albert Leec187c4b2005-10-04 08:46:51 -04001215
1216 /* for 6-byte r/w commands, transfer length 0
1217 * means 256 blocks of data, not 0 block.
1218 */
Jeff Garzik76b2bf92005-08-29 19:24:43 -04001219 if (!n_block)
1220 n_block = 256;
Albert Lee3aef5232005-10-04 08:47:43 -04001221 break;
1222 case READ_16:
1223 case WRITE_16:
1224 scsi_16_lba_len(scsicmd, &block, &n_block);
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001225 if (unlikely(scsicmd[1] & (1 << 3)))
1226 tf->flags |= ATA_TFLAG_FUA;
Albert Lee3aef5232005-10-04 08:47:43 -04001227 break;
1228 default:
Albert Lee8bf62ece2005-05-12 15:29:42 -04001229 DPRINTK("no-byte command\n");
Douglas Gilbertae006512005-10-09 09:09:35 -04001230 goto invalid_fld;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001231 }
1232
Albert Lee8bf62ece2005-05-12 15:29:42 -04001233 /* Check and compose ATA command */
1234 if (!n_block)
Albert Leec187c4b2005-10-04 08:46:51 -04001235 /* For 10-byte and 16-byte SCSI R/W commands, transfer
1236 * length 0 means transfer 0 block of data.
1237 * However, for ATA R/W commands, sector count 0 means
1238 * 256 or 65536 sectors, not 0 sectors as in SCSI.
Alan Coxf51750d2005-11-07 17:06:33 +00001239 *
1240 * WARNING: one or two older ATA drives treat 0 as 0...
Albert Leec187c4b2005-10-04 08:46:51 -04001241 */
Douglas Gilbertae006512005-10-09 09:09:35 -04001242 goto nothing_to_do;
Albert Lee8bf62ece2005-05-12 15:29:42 -04001243
Albert Lee07506692005-10-12 15:04:18 +08001244 if (dev->flags & ATA_DFLAG_LBA) {
1245 tf->flags |= ATA_TFLAG_LBA;
1246
Albert Leec6a33e22005-10-12 15:12:26 +08001247 if (lba_28_ok(block, n_block)) {
1248 /* use LBA28 */
1249 tf->device |= (block >> 24) & 0xf;
1250 } else if (lba_48_ok(block, n_block)) {
1251 if (!(dev->flags & ATA_DFLAG_LBA48))
Douglas Gilbertae006512005-10-09 09:09:35 -04001252 goto out_of_range;
Albert Lee8bf62ece2005-05-12 15:29:42 -04001253
Albert Lee07506692005-10-12 15:04:18 +08001254 /* use LBA48 */
1255 tf->flags |= ATA_TFLAG_LBA48;
1256
Albert Lee8bf62ece2005-05-12 15:29:42 -04001257 tf->hob_nsect = (n_block >> 8) & 0xff;
1258
1259 tf->hob_lbah = (block >> 40) & 0xff;
1260 tf->hob_lbam = (block >> 32) & 0xff;
1261 tf->hob_lbal = (block >> 24) & 0xff;
Albert Leec6a33e22005-10-12 15:12:26 +08001262 } else
1263 /* request too large even for LBA48 */
1264 goto out_of_range;
Albert Leec187c4b2005-10-04 08:46:51 -04001265
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001266 if (unlikely(ata_rwcmd_protocol(qc) < 0))
1267 goto invalid_fld;
Albert Lee8cbd6df2005-10-12 15:06:27 +08001268
Albert Lee8bf62ece2005-05-12 15:29:42 -04001269 qc->nsect = n_block;
1270 tf->nsect = n_block & 0xff;
1271
1272 tf->lbah = (block >> 16) & 0xff;
1273 tf->lbam = (block >> 8) & 0xff;
1274 tf->lbal = block & 0xff;
1275
1276 tf->device |= ATA_LBA;
Jeff Garzik2e9edbf2006-03-24 09:56:57 -05001277 } else {
Albert Lee8bf62ece2005-05-12 15:29:42 -04001278 /* CHS */
1279 u32 sect, head, cyl, track;
1280
1281 /* The request -may- be too large for CHS addressing. */
Albert Leec6a33e22005-10-12 15:12:26 +08001282 if (!lba_28_ok(block, n_block))
Douglas Gilbertae006512005-10-09 09:09:35 -04001283 goto out_of_range;
Albert Leec187c4b2005-10-04 08:46:51 -04001284
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001285 if (unlikely(ata_rwcmd_protocol(qc) < 0))
1286 goto invalid_fld;
Albert Lee8cbd6df2005-10-12 15:06:27 +08001287
Albert Lee8bf62ece2005-05-12 15:29:42 -04001288 /* Convert LBA to CHS */
1289 track = (u32)block / dev->sectors;
1290 cyl = track / dev->heads;
1291 head = track % dev->heads;
1292 sect = (u32)block % dev->sectors + 1;
1293
Albert Leec187c4b2005-10-04 08:46:51 -04001294 DPRINTK("block %u track %u cyl %u head %u sect %u\n",
Albert Lee8bf62ece2005-05-12 15:29:42 -04001295 (u32)block, track, cyl, head, sect);
Albert Leec187c4b2005-10-04 08:46:51 -04001296
Jeff Garzik2e9edbf2006-03-24 09:56:57 -05001297 /* Check whether the converted CHS can fit.
1298 Cylinder: 0-65535
Albert Lee8bf62ece2005-05-12 15:29:42 -04001299 Head: 0-15
1300 Sector: 1-255*/
Albert Leec187c4b2005-10-04 08:46:51 -04001301 if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
Douglas Gilbertae006512005-10-09 09:09:35 -04001302 goto out_of_range;
Albert Leec187c4b2005-10-04 08:46:51 -04001303
Albert Lee8bf62ece2005-05-12 15:29:42 -04001304 qc->nsect = n_block;
1305 tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
1306 tf->lbal = sect;
1307 tf->lbam = cyl;
1308 tf->lbah = cyl >> 8;
1309 tf->device |= head;
1310 }
1311
1312 return 0;
Douglas Gilbertae006512005-10-09 09:09:35 -04001313
1314invalid_fld:
1315 ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
1316 /* "Invalid field in cbd" */
1317 return 1;
1318
1319out_of_range:
1320 ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
1321 /* "Logical Block Address out of range" */
1322 return 1;
1323
1324nothing_to_do:
1325 qc->scsicmd->result = SAM_STAT_GOOD;
1326 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001327}
1328
Tejun Heo77853bf2006-01-23 13:09:36 +09001329static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001330{
1331 struct scsi_cmnd *cmd = qc->scsicmd;
Jeff Garzika7dac442005-10-30 04:44:42 -05001332 u8 *cdb = cmd->cmnd;
Albert Leea22e2eb2005-12-05 15:38:02 +08001333 int need_sense = (qc->err_mask != 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001334
Jeff Garzikb0955182005-05-12 15:45:22 -04001335 /* For ATA pass thru (SAT) commands, generate a sense block if
1336 * user mandated it or if there's an error. Note that if we
1337 * generate because the user forced us to, a check condition
1338 * is generated and the ATA register values are returned
1339 * whether the command completed successfully or not. If there
1340 * was no error, SK, ASC and ASCQ will all be zero.
1341 */
Jeff Garzika7dac442005-10-30 04:44:42 -05001342 if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
1343 ((cdb[2] & 0x20) || need_sense)) {
Jeff Garzikb0955182005-05-12 15:45:22 -04001344 ata_gen_ata_desc_sense(qc);
1345 } else {
1346 if (!need_sense) {
1347 cmd->result = SAM_STAT_GOOD;
1348 } else {
1349 /* TODO: decide which descriptor format to use
1350 * for 48b LBA devices and call that here
1351 * instead of the fixed desc, which is only
1352 * good for smaller LBA (and maybe CHS?)
1353 * devices.
1354 */
1355 ata_gen_fixed_sense(qc);
1356 }
1357 }
1358
1359 if (need_sense) {
1360 /* The ata_gen_..._sense routines fill in tf */
1361 ata_dump_status(qc->ap->id, &qc->tf);
1362 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001363
1364 qc->scsidone(cmd);
1365
Tejun Heo77853bf2006-01-23 13:09:36 +09001366 ata_qc_free(qc);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001367}
1368
1369/**
1370 * ata_scsi_translate - Translate then issue SCSI command to ATA device
1371 * @ap: ATA port to which the command is addressed
1372 * @dev: ATA device to which the command is addressed
1373 * @cmd: SCSI command to execute
1374 * @done: SCSI command completion function
1375 * @xlat_func: Actor which translates @cmd to an ATA taskfile
1376 *
1377 * Our ->queuecommand() function has decided that the SCSI
1378 * command issued can be directly translated into an ATA
1379 * command, rather than handled internally.
1380 *
1381 * This function sets up an ata_queued_cmd structure for the
1382 * SCSI command, and sends that ata_queued_cmd to the hardware.
1383 *
Douglas Gilbertae006512005-10-09 09:09:35 -04001384 * The xlat_func argument (actor) returns 0 if ready to execute
1385 * ATA command, else 1 to finish translation. If 1 is returned
1386 * then cmd->result (and possibly cmd->sense_buffer) are assumed
1387 * to be set reflecting an error condition or clean (early)
1388 * termination.
1389 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07001390 * LOCKING:
1391 * spin_lock_irqsave(host_set lock)
1392 */
1393
1394static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev,
1395 struct scsi_cmnd *cmd,
1396 void (*done)(struct scsi_cmnd *),
1397 ata_xlat_func_t xlat_func)
1398{
1399 struct ata_queued_cmd *qc;
1400 u8 *scsicmd = cmd->cmnd;
1401
1402 VPRINTK("ENTER\n");
1403
1404 qc = ata_scsi_qc_new(ap, dev, cmd, done);
1405 if (!qc)
Douglas Gilbertae006512005-10-09 09:09:35 -04001406 goto err_mem;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001407
1408 /* data is present; dma-map it */
be7db052005-04-17 15:26:13 -05001409 if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
1410 cmd->sc_data_direction == DMA_TO_DEVICE) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001411 if (unlikely(cmd->request_bufflen < 1)) {
1412 printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n",
1413 ap->id, dev->devno);
Douglas Gilbertae006512005-10-09 09:09:35 -04001414 goto err_did;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001415 }
1416
1417 if (cmd->use_sg)
1418 ata_sg_init(qc, cmd->request_buffer, cmd->use_sg);
1419 else
1420 ata_sg_init_one(qc, cmd->request_buffer,
1421 cmd->request_bufflen);
1422
1423 qc->dma_dir = cmd->sc_data_direction;
1424 }
1425
1426 qc->complete_fn = ata_scsi_qc_complete;
1427
1428 if (xlat_func(qc, scsicmd))
Douglas Gilbertae006512005-10-09 09:09:35 -04001429 goto early_finish;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001430
1431 /* select device, send command to hardware */
Tejun Heo8e0e6942006-03-31 20:41:11 +09001432 ata_qc_issue(qc);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001433
1434 VPRINTK("EXIT\n");
1435 return;
1436
Douglas Gilbertae006512005-10-09 09:09:35 -04001437early_finish:
1438 ata_qc_free(qc);
1439 done(cmd);
1440 DPRINTK("EXIT - early finish (good or error)\n");
1441 return;
1442
1443err_did:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001444 ata_qc_free(qc);
Douglas Gilbertae006512005-10-09 09:09:35 -04001445err_mem:
1446 cmd->result = (DID_ERROR << 16);
1447 done(cmd);
1448 DPRINTK("EXIT - internal\n");
1449 return;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001450}
1451
1452/**
1453 * ata_scsi_rbuf_get - Map response buffer.
1454 * @cmd: SCSI command containing buffer to be mapped.
1455 * @buf_out: Pointer to mapped area.
1456 *
1457 * Maps buffer contained within SCSI command @cmd.
1458 *
1459 * LOCKING:
1460 * spin_lock_irqsave(host_set lock)
1461 *
1462 * RETURNS:
1463 * Length of response buffer.
1464 */
1465
1466static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out)
1467{
1468 u8 *buf;
1469 unsigned int buflen;
1470
1471 if (cmd->use_sg) {
1472 struct scatterlist *sg;
1473
1474 sg = (struct scatterlist *) cmd->request_buffer;
1475 buf = kmap_atomic(sg->page, KM_USER0) + sg->offset;
1476 buflen = sg->length;
1477 } else {
1478 buf = cmd->request_buffer;
1479 buflen = cmd->request_bufflen;
1480 }
1481
1482 *buf_out = buf;
1483 return buflen;
1484}
1485
1486/**
1487 * ata_scsi_rbuf_put - Unmap response buffer.
1488 * @cmd: SCSI command containing buffer to be unmapped.
1489 * @buf: buffer to unmap
1490 *
1491 * Unmaps response buffer contained within @cmd.
1492 *
1493 * LOCKING:
1494 * spin_lock_irqsave(host_set lock)
1495 */
1496
1497static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf)
1498{
1499 if (cmd->use_sg) {
1500 struct scatterlist *sg;
1501
1502 sg = (struct scatterlist *) cmd->request_buffer;
1503 kunmap_atomic(buf - sg->offset, KM_USER0);
1504 }
1505}
1506
1507/**
1508 * ata_scsi_rbuf_fill - wrapper for SCSI command simulators
1509 * @args: device IDENTIFY data / SCSI command of interest.
1510 * @actor: Callback hook for desired SCSI command simulator
1511 *
1512 * Takes care of the hard work of simulating a SCSI command...
1513 * Mapping the response buffer, calling the command's handler,
1514 * and handling the handler's return value. This return value
1515 * indicates whether the handler wishes the SCSI command to be
Douglas Gilbertae006512005-10-09 09:09:35 -04001516 * completed successfully (0), or not (in which case cmd->result
1517 * and sense buffer are assumed to be set).
Linus Torvalds1da177e2005-04-16 15:20:36 -07001518 *
1519 * LOCKING:
1520 * spin_lock_irqsave(host_set lock)
1521 */
1522
1523void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
1524 unsigned int (*actor) (struct ata_scsi_args *args,
1525 u8 *rbuf, unsigned int buflen))
1526{
1527 u8 *rbuf;
1528 unsigned int buflen, rc;
1529 struct scsi_cmnd *cmd = args->cmd;
1530
1531 buflen = ata_scsi_rbuf_get(cmd, &rbuf);
1532 memset(rbuf, 0, buflen);
1533 rc = actor(args, rbuf, buflen);
1534 ata_scsi_rbuf_put(cmd, rbuf);
1535
Douglas Gilbertae006512005-10-09 09:09:35 -04001536 if (rc == 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001537 cmd->result = SAM_STAT_GOOD;
Douglas Gilbertae006512005-10-09 09:09:35 -04001538 args->done(cmd);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001539}
1540
1541/**
1542 * ata_scsiop_inq_std - Simulate INQUIRY command
1543 * @args: device IDENTIFY data / SCSI command of interest.
1544 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1545 * @buflen: Response buffer length.
1546 *
1547 * Returns standard device identification data associated
Jeff Garzikb142eb62006-03-21 20:37:47 -05001548 * with non-VPD INQUIRY command output.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001549 *
1550 * LOCKING:
1551 * spin_lock_irqsave(host_set lock)
1552 */
1553
1554unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
1555 unsigned int buflen)
1556{
1557 u8 hdr[] = {
1558 TYPE_DISK,
1559 0,
1560 0x5, /* claim SPC-3 version compatibility */
1561 2,
1562 95 - 4
1563 };
1564
1565 /* set scsi removeable (RMB) bit per ata bit */
1566 if (ata_id_removeable(args->id))
1567 hdr[1] |= (1 << 7);
1568
1569 VPRINTK("ENTER\n");
1570
1571 memcpy(rbuf, hdr, sizeof(hdr));
1572
1573 if (buflen > 35) {
1574 memcpy(&rbuf[8], "ATA ", 8);
Tejun Heo6a62a042006-02-13 10:02:46 +09001575 ata_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16);
1576 ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001577 if (rbuf[32] == 0 || rbuf[32] == ' ')
1578 memcpy(&rbuf[32], "n/a ", 4);
1579 }
1580
1581 if (buflen > 63) {
1582 const u8 versions[] = {
1583 0x60, /* SAM-3 (no version claimed) */
1584
1585 0x03,
1586 0x20, /* SBC-2 (no version claimed) */
1587
1588 0x02,
1589 0x60 /* SPC-3 (no version claimed) */
1590 };
1591
1592 memcpy(rbuf + 59, versions, sizeof(versions));
1593 }
1594
1595 return 0;
1596}
1597
1598/**
Jeff Garzikb142eb62006-03-21 20:37:47 -05001599 * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages
Linus Torvalds1da177e2005-04-16 15:20:36 -07001600 * @args: device IDENTIFY data / SCSI command of interest.
1601 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1602 * @buflen: Response buffer length.
1603 *
Jeff Garzikb142eb62006-03-21 20:37:47 -05001604 * Returns list of inquiry VPD pages available.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001605 *
1606 * LOCKING:
1607 * spin_lock_irqsave(host_set lock)
1608 */
1609
1610unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf,
1611 unsigned int buflen)
1612{
1613 const u8 pages[] = {
1614 0x00, /* page 0x00, this page */
1615 0x80, /* page 0x80, unit serial no page */
1616 0x83 /* page 0x83, device ident page */
1617 };
Jeff Garzikb142eb62006-03-21 20:37:47 -05001618 rbuf[3] = sizeof(pages); /* number of supported VPD pages */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001619
1620 if (buflen > 6)
1621 memcpy(rbuf + 4, pages, sizeof(pages));
1622
1623 return 0;
1624}
1625
1626/**
Jeff Garzikb142eb62006-03-21 20:37:47 -05001627 * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number
Linus Torvalds1da177e2005-04-16 15:20:36 -07001628 * @args: device IDENTIFY data / SCSI command of interest.
1629 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1630 * @buflen: Response buffer length.
1631 *
1632 * Returns ATA device serial number.
1633 *
1634 * LOCKING:
1635 * spin_lock_irqsave(host_set lock)
1636 */
1637
1638unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf,
1639 unsigned int buflen)
1640{
1641 const u8 hdr[] = {
1642 0,
1643 0x80, /* this page code */
1644 0,
1645 ATA_SERNO_LEN, /* page len */
1646 };
1647 memcpy(rbuf, hdr, sizeof(hdr));
1648
1649 if (buflen > (ATA_SERNO_LEN + 4 - 1))
Tejun Heo6a62a042006-02-13 10:02:46 +09001650 ata_id_string(args->id, (unsigned char *) &rbuf[4],
1651 ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001652
1653 return 0;
1654}
1655
Linus Torvalds1da177e2005-04-16 15:20:36 -07001656/**
Jeff Garzikb142eb62006-03-21 20:37:47 -05001657 * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity
Linus Torvalds1da177e2005-04-16 15:20:36 -07001658 * @args: device IDENTIFY data / SCSI command of interest.
1659 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1660 * @buflen: Response buffer length.
1661 *
Jeff Garzikb142eb62006-03-21 20:37:47 -05001662 * Yields two logical unit device identification designators:
1663 * - vendor specific ASCII containing the ATA serial number
1664 * - SAT defined "t10 vendor id based" containing ASCII vendor
1665 * name ("ATA "), model and serial numbers.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001666 *
1667 * LOCKING:
1668 * spin_lock_irqsave(host_set lock)
1669 */
1670
1671unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
1672 unsigned int buflen)
1673{
Jeff Garzikb142eb62006-03-21 20:37:47 -05001674 int num;
1675 const int sat_model_serial_desc_len = 68;
1676 const int ata_model_byte_len = 40;
1677
Linus Torvalds1da177e2005-04-16 15:20:36 -07001678 rbuf[1] = 0x83; /* this page code */
Jeff Garzikb142eb62006-03-21 20:37:47 -05001679 num = 4;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001680
Jeff Garzikb142eb62006-03-21 20:37:47 -05001681 if (buflen > (ATA_SERNO_LEN + num + 3)) {
1682 /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */
Jeff Garzik2e9edbf2006-03-24 09:56:57 -05001683 rbuf[num + 0] = 2;
Jeff Garzikb142eb62006-03-21 20:37:47 -05001684 rbuf[num + 3] = ATA_SERNO_LEN;
1685 num += 4;
1686 ata_id_string(args->id, (unsigned char *) rbuf + num,
1687 ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
1688 num += ATA_SERNO_LEN;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001689 }
Jeff Garzikb142eb62006-03-21 20:37:47 -05001690 if (buflen > (sat_model_serial_desc_len + num + 3)) {
1691 /* SAT defined lu model and serial numbers descriptor */
1692 /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */
Jeff Garzik2e9edbf2006-03-24 09:56:57 -05001693 rbuf[num + 0] = 2;
1694 rbuf[num + 1] = 1;
Jeff Garzikb142eb62006-03-21 20:37:47 -05001695 rbuf[num + 3] = sat_model_serial_desc_len;
1696 num += 4;
1697 memcpy(rbuf + num, "ATA ", 8);
1698 num += 8;
1699 ata_id_string(args->id, (unsigned char *) rbuf + num,
1700 ATA_ID_PROD_OFS, ata_model_byte_len);
1701 num += ata_model_byte_len;
1702 ata_id_string(args->id, (unsigned char *) rbuf + num,
1703 ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
1704 num += ATA_SERNO_LEN;
1705 }
1706 rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001707 return 0;
1708}
1709
1710/**
Jeff Garzik0cba6322005-05-30 19:49:12 -04001711 * ata_scsiop_noop - Command handler that simply returns success.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001712 * @args: device IDENTIFY data / SCSI command of interest.
1713 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1714 * @buflen: Response buffer length.
1715 *
1716 * No operation. Simply returns success to caller, to indicate
1717 * that the caller should successfully complete this SCSI command.
1718 *
1719 * LOCKING:
1720 * spin_lock_irqsave(host_set lock)
1721 */
1722
1723unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf,
1724 unsigned int buflen)
1725{
1726 VPRINTK("ENTER\n");
1727 return 0;
1728}
1729
1730/**
1731 * ata_msense_push - Push data onto MODE SENSE data output buffer
1732 * @ptr_io: (input/output) Location to store more output data
1733 * @last: End of output data buffer
1734 * @buf: Pointer to BLOB being added to output buffer
1735 * @buflen: Length of BLOB
1736 *
1737 * Store MODE SENSE data on an output buffer.
1738 *
1739 * LOCKING:
1740 * None.
1741 */
1742
1743static void ata_msense_push(u8 **ptr_io, const u8 *last,
1744 const u8 *buf, unsigned int buflen)
1745{
1746 u8 *ptr = *ptr_io;
1747
1748 if ((ptr + buflen - 1) > last)
1749 return;
1750
1751 memcpy(ptr, buf, buflen);
1752
1753 ptr += buflen;
1754
1755 *ptr_io = ptr;
1756}
1757
1758/**
1759 * ata_msense_caching - Simulate MODE SENSE caching info page
1760 * @id: device IDENTIFY data
1761 * @ptr_io: (input/output) Location to store more output data
1762 * @last: End of output data buffer
1763 *
1764 * Generate a caching info page, which conditionally indicates
1765 * write caching to the SCSI layer, depending on device
1766 * capabilities.
1767 *
1768 * LOCKING:
1769 * None.
1770 */
1771
1772static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io,
1773 const u8 *last)
1774{
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001775 u8 page[CACHE_MPAGE_LEN];
Linus Torvalds1da177e2005-04-16 15:20:36 -07001776
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001777 memcpy(page, def_cache_mpage, sizeof(page));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001778 if (ata_id_wcache_enabled(id))
1779 page[2] |= (1 << 2); /* write cache enable */
1780 if (!ata_id_rahead_enabled(id))
1781 page[12] |= (1 << 5); /* disable read ahead */
1782
1783 ata_msense_push(ptr_io, last, page, sizeof(page));
1784 return sizeof(page);
1785}
1786
1787/**
1788 * ata_msense_ctl_mode - Simulate MODE SENSE control mode page
1789 * @dev: Device associated with this MODE SENSE command
1790 * @ptr_io: (input/output) Location to store more output data
1791 * @last: End of output data buffer
1792 *
1793 * Generate a generic MODE SENSE control mode page.
1794 *
1795 * LOCKING:
1796 * None.
1797 */
1798
1799static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last)
1800{
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001801 ata_msense_push(ptr_io, last, def_control_mpage,
1802 sizeof(def_control_mpage));
1803 return sizeof(def_control_mpage);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001804}
1805
1806/**
1807 * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
1808 * @dev: Device associated with this MODE SENSE command
1809 * @ptr_io: (input/output) Location to store more output data
1810 * @last: End of output data buffer
1811 *
1812 * Generate a generic MODE SENSE r/w error recovery page.
1813 *
1814 * LOCKING:
1815 * None.
1816 */
1817
1818static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last)
1819{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001820
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001821 ata_msense_push(ptr_io, last, def_rw_recovery_mpage,
1822 sizeof(def_rw_recovery_mpage));
1823 return sizeof(def_rw_recovery_mpage);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001824}
1825
Jens Axboe48bdc8e2006-01-30 16:09:35 +01001826/*
1827 * We can turn this into a real blacklist if it's needed, for now just
1828 * blacklist any Maxtor BANC1G10 revision firmware
1829 */
1830static int ata_dev_supports_fua(u16 *id)
1831{
1832 unsigned char model[41], fw[9];
1833
Jeff Garzikc3c013a2006-02-27 22:31:19 -05001834 if (!libata_fua)
1835 return 0;
Jens Axboe48bdc8e2006-01-30 16:09:35 +01001836 if (!ata_id_has_fua(id))
1837 return 0;
1838
Tejun Heo6a62a042006-02-13 10:02:46 +09001839 ata_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model));
1840 ata_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw));
Jens Axboe48bdc8e2006-01-30 16:09:35 +01001841
Tejun Heo2e026712006-02-12 22:47:04 +09001842 if (strcmp(model, "Maxtor"))
Jens Axboe48bdc8e2006-01-30 16:09:35 +01001843 return 1;
Tejun Heo2e026712006-02-12 22:47:04 +09001844 if (strcmp(fw, "BANC1G10"))
Jens Axboe48bdc8e2006-01-30 16:09:35 +01001845 return 1;
1846
1847 return 0; /* blacklisted */
1848}
1849
Linus Torvalds1da177e2005-04-16 15:20:36 -07001850/**
1851 * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands
1852 * @args: device IDENTIFY data / SCSI command of interest.
1853 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1854 * @buflen: Response buffer length.
1855 *
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001856 * Simulate MODE SENSE commands. Assume this is invoked for direct
1857 * access devices (e.g. disks) only. There should be no block
1858 * descriptor for other device types.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001859 *
1860 * LOCKING:
1861 * spin_lock_irqsave(host_set lock)
1862 */
1863
1864unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf,
1865 unsigned int buflen)
1866{
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001867 struct ata_device *dev = args->dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001868 u8 *scsicmd = args->cmd->cmnd, *p, *last;
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001869 const u8 sat_blk_desc[] = {
1870 0, 0, 0, 0, /* number of blocks: sat unspecified */
1871 0,
1872 0, 0x2, 0x0 /* block length: 512 bytes */
1873 };
1874 u8 pg, spg;
1875 unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen;
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001876 u8 dpofua;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001877
1878 VPRINTK("ENTER\n");
1879
1880 six_byte = (scsicmd[0] == MODE_SENSE);
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001881 ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */
1882 /*
1883 * LLBA bit in msense(10) ignored (compliant)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001884 */
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001885
Linus Torvalds1da177e2005-04-16 15:20:36 -07001886 page_control = scsicmd[2] >> 6;
Douglas Gilbertae006512005-10-09 09:09:35 -04001887 switch (page_control) {
1888 case 0: /* current */
1889 break; /* supported */
1890 case 3: /* saved */
1891 goto saving_not_supp;
1892 case 1: /* changeable */
1893 case 2: /* defaults */
1894 default:
1895 goto invalid_fld;
1896 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001897
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001898 if (six_byte) {
1899 output_len = 4 + (ebd ? 8 : 0);
1900 alloc_len = scsicmd[4];
1901 } else {
1902 output_len = 8 + (ebd ? 8 : 0);
1903 alloc_len = (scsicmd[7] << 8) + scsicmd[8];
1904 }
1905 minlen = (alloc_len < buflen) ? alloc_len : buflen;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001906
1907 p = rbuf + output_len;
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001908 last = rbuf + minlen - 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001909
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001910 pg = scsicmd[2] & 0x3f;
1911 spg = scsicmd[3];
1912 /*
1913 * No mode subpages supported (yet) but asking for _all_
1914 * subpages may be valid
1915 */
1916 if (spg && (spg != ALL_SUB_MPAGES))
1917 goto invalid_fld;
1918
1919 switch(pg) {
1920 case RW_RECOVERY_MPAGE:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001921 output_len += ata_msense_rw_recovery(&p, last);
1922 break;
1923
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001924 case CACHE_MPAGE:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001925 output_len += ata_msense_caching(args->id, &p, last);
1926 break;
1927
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001928 case CONTROL_MPAGE: {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001929 output_len += ata_msense_ctl_mode(&p, last);
1930 break;
1931 }
1932
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001933 case ALL_MPAGES:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001934 output_len += ata_msense_rw_recovery(&p, last);
1935 output_len += ata_msense_caching(args->id, &p, last);
1936 output_len += ata_msense_ctl_mode(&p, last);
1937 break;
1938
1939 default: /* invalid page code */
Douglas Gilbertae006512005-10-09 09:09:35 -04001940 goto invalid_fld;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001941 }
1942
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001943 if (minlen < 1)
1944 return 0;
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001945
1946 dpofua = 0;
Jens Axboe48bdc8e2006-01-30 16:09:35 +01001947 if (ata_dev_supports_fua(args->id) && dev->flags & ATA_DFLAG_LBA48 &&
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001948 (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count))
1949 dpofua = 1 << 4;
1950
Linus Torvalds1da177e2005-04-16 15:20:36 -07001951 if (six_byte) {
1952 output_len--;
1953 rbuf[0] = output_len;
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001954 if (minlen > 2)
1955 rbuf[2] |= dpofua;
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001956 if (ebd) {
1957 if (minlen > 3)
1958 rbuf[3] = sizeof(sat_blk_desc);
1959 if (minlen > 11)
1960 memcpy(rbuf + 4, sat_blk_desc,
1961 sizeof(sat_blk_desc));
1962 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001963 } else {
1964 output_len -= 2;
1965 rbuf[0] = output_len >> 8;
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001966 if (minlen > 1)
1967 rbuf[1] = output_len;
Tejun Heo9a3dccc2006-01-06 09:56:18 +01001968 if (minlen > 3)
1969 rbuf[3] |= dpofua;
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04001970 if (ebd) {
1971 if (minlen > 7)
1972 rbuf[7] = sizeof(sat_blk_desc);
1973 if (minlen > 15)
1974 memcpy(rbuf + 8, sat_blk_desc,
1975 sizeof(sat_blk_desc));
1976 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001977 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001978 return 0;
Douglas Gilbertae006512005-10-09 09:09:35 -04001979
1980invalid_fld:
1981 ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0);
1982 /* "Invalid field in cbd" */
1983 return 1;
1984
1985saving_not_supp:
1986 ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0);
1987 /* "Saving parameters not supported" */
1988 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001989}
1990
1991/**
1992 * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands
1993 * @args: device IDENTIFY data / SCSI command of interest.
1994 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1995 * @buflen: Response buffer length.
1996 *
1997 * Simulate READ CAPACITY commands.
1998 *
1999 * LOCKING:
2000 * spin_lock_irqsave(host_set lock)
2001 */
2002
2003unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
2004 unsigned int buflen)
2005{
2006 u64 n_sectors;
2007 u32 tmp;
2008
2009 VPRINTK("ENTER\n");
2010
Albert Lee8bf62ece2005-05-12 15:29:42 -04002011 if (ata_id_has_lba(args->id)) {
2012 if (ata_id_has_lba48(args->id))
2013 n_sectors = ata_id_u64(args->id, 100);
2014 else
2015 n_sectors = ata_id_u32(args->id, 60);
2016 } else {
2017 /* CHS default translation */
2018 n_sectors = args->id[1] * args->id[3] * args->id[6];
2019
2020 if (ata_id_current_chs_valid(args->id))
2021 /* CHS current translation */
2022 n_sectors = ata_id_u32(args->id, 57);
2023 }
2024
Linus Torvalds1da177e2005-04-16 15:20:36 -07002025 n_sectors--; /* ATA TotalUserSectors - 1 */
2026
Linus Torvalds1da177e2005-04-16 15:20:36 -07002027 if (args->cmd->cmnd[0] == READ_CAPACITY) {
Philip Pokorny0c144d02005-05-28 01:24:47 -07002028 if( n_sectors >= 0xffffffffULL )
2029 tmp = 0xffffffff ; /* Return max count on overflow */
2030 else
2031 tmp = n_sectors ;
2032
Linus Torvalds1da177e2005-04-16 15:20:36 -07002033 /* sector count, 32-bit */
2034 rbuf[0] = tmp >> (8 * 3);
2035 rbuf[1] = tmp >> (8 * 2);
2036 rbuf[2] = tmp >> (8 * 1);
2037 rbuf[3] = tmp;
2038
2039 /* sector size */
2040 tmp = ATA_SECT_SIZE;
2041 rbuf[6] = tmp >> 8;
2042 rbuf[7] = tmp;
2043
2044 } else {
2045 /* sector count, 64-bit */
Philip Pokorny0c144d02005-05-28 01:24:47 -07002046 tmp = n_sectors >> (8 * 4);
2047 rbuf[2] = tmp >> (8 * 3);
2048 rbuf[3] = tmp >> (8 * 2);
2049 rbuf[4] = tmp >> (8 * 1);
2050 rbuf[5] = tmp;
2051 tmp = n_sectors;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002052 rbuf[6] = tmp >> (8 * 3);
2053 rbuf[7] = tmp >> (8 * 2);
2054 rbuf[8] = tmp >> (8 * 1);
2055 rbuf[9] = tmp;
2056
2057 /* sector size */
2058 tmp = ATA_SECT_SIZE;
2059 rbuf[12] = tmp >> 8;
2060 rbuf[13] = tmp;
2061 }
2062
2063 return 0;
2064}
2065
2066/**
2067 * ata_scsiop_report_luns - Simulate REPORT LUNS command
2068 * @args: device IDENTIFY data / SCSI command of interest.
2069 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
2070 * @buflen: Response buffer length.
2071 *
2072 * Simulate REPORT LUNS command.
2073 *
2074 * LOCKING:
2075 * spin_lock_irqsave(host_set lock)
2076 */
2077
2078unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf,
2079 unsigned int buflen)
2080{
2081 VPRINTK("ENTER\n");
2082 rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */
2083
2084 return 0;
2085}
2086
2087/**
Douglas Gilbert845c5832005-10-09 08:55:41 -04002088 * ata_scsi_set_sense - Set SCSI sense data and status
2089 * @cmd: SCSI request to be handled
2090 * @sk: SCSI-defined sense key
2091 * @asc: SCSI-defined additional sense code
2092 * @ascq: SCSI-defined additional sense code qualifier
2093 *
2094 * Helper function that builds a valid fixed format, current
2095 * response code and the given sense key (sk), additional sense
2096 * code (asc) and additional sense code qualifier (ascq) with
2097 * a SCSI command status of %SAM_STAT_CHECK_CONDITION and
2098 * DRIVER_SENSE set in the upper bits of scsi_cmnd::result .
2099 *
2100 * LOCKING:
2101 * Not required
2102 */
2103
2104void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
2105{
2106 cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
2107
2108 cmd->sense_buffer[0] = 0x70; /* fixed format, current */
2109 cmd->sense_buffer[2] = sk;
2110 cmd->sense_buffer[7] = 18 - 8; /* additional sense length */
2111 cmd->sense_buffer[12] = asc;
2112 cmd->sense_buffer[13] = ascq;
2113}
2114
2115/**
Linus Torvalds1da177e2005-04-16 15:20:36 -07002116 * ata_scsi_badcmd - End a SCSI request with an error
2117 * @cmd: SCSI request to be handled
2118 * @done: SCSI command completion function
2119 * @asc: SCSI-defined additional sense code
2120 * @ascq: SCSI-defined additional sense code qualifier
2121 *
2122 * Helper function that completes a SCSI command with
2123 * %SAM_STAT_CHECK_CONDITION, with a sense key %ILLEGAL_REQUEST
2124 * and the specified additional sense codes.
2125 *
2126 * LOCKING:
2127 * spin_lock_irqsave(host_set lock)
2128 */
2129
2130void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq)
2131{
2132 DPRINTK("ENTER\n");
Douglas Gilbertae006512005-10-09 09:09:35 -04002133 ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002134
2135 done(cmd);
2136}
2137
Tejun Heo77853bf2006-01-23 13:09:36 +09002138static void atapi_sense_complete(struct ata_queued_cmd *qc)
Jeff Garzika939c962005-10-05 17:09:16 -04002139{
Albert Leea22e2eb2005-12-05 15:38:02 +08002140 if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0))
Jeff Garzikc6e6e6662005-11-14 14:50:05 -05002141 /* FIXME: not quite right; we don't want the
2142 * translation of taskfile registers into
2143 * a sense descriptors, since that's only
2144 * correct for ATA, not ATAPI
2145 */
2146 ata_gen_ata_desc_sense(qc);
2147
2148 qc->scsidone(qc->scsicmd);
Tejun Heo77853bf2006-01-23 13:09:36 +09002149 ata_qc_free(qc);
Jeff Garzikc6e6e6662005-11-14 14:50:05 -05002150}
2151
2152/* is it pointless to prefer PIO for "safety reasons"? */
2153static inline int ata_pio_use_silly(struct ata_port *ap)
2154{
2155 return (ap->flags & ATA_FLAG_PIO_DMA);
2156}
2157
2158static void atapi_request_sense(struct ata_queued_cmd *qc)
2159{
2160 struct ata_port *ap = qc->ap;
2161 struct scsi_cmnd *cmd = qc->scsicmd;
Jeff Garzika939c962005-10-05 17:09:16 -04002162
2163 DPRINTK("ATAPI request sense\n");
2164
Jeff Garzika939c962005-10-05 17:09:16 -04002165 /* FIXME: is this needed? */
2166 memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
2167
Jeff Garzikc6e6e6662005-11-14 14:50:05 -05002168 ap->ops->tf_read(ap, &qc->tf);
2169
2170 /* fill these in, for the case where they are -not- overwritten */
2171 cmd->sense_buffer[0] = 0x70;
2172 cmd->sense_buffer[2] = qc->tf.feature >> 4;
2173
2174 ata_qc_reinit(qc);
2175
Jeff Garzika939c962005-10-05 17:09:16 -04002176 ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
2177 qc->dma_dir = DMA_FROM_DEVICE;
2178
Tejun Heo6e7846e2006-02-12 23:32:58 +09002179 memset(&qc->cdb, 0, qc->dev->cdb_len);
Jeff Garzika939c962005-10-05 17:09:16 -04002180 qc->cdb[0] = REQUEST_SENSE;
2181 qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
2182
2183 qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
2184 qc->tf.command = ATA_CMD_PACKET;
2185
Jeff Garzikc6e6e6662005-11-14 14:50:05 -05002186 if (ata_pio_use_silly(ap)) {
2187 qc->tf.protocol = ATA_PROT_ATAPI_DMA;
2188 qc->tf.feature |= ATAPI_PKT_DMA;
2189 } else {
2190 qc->tf.protocol = ATA_PROT_ATAPI;
2191 qc->tf.lbam = (8 * 1024) & 0xff;
2192 qc->tf.lbah = (8 * 1024) >> 8;
2193 }
Jeff Garzika939c962005-10-05 17:09:16 -04002194 qc->nbytes = SCSI_SENSE_BUFFERSIZE;
2195
Jeff Garzikc6e6e6662005-11-14 14:50:05 -05002196 qc->complete_fn = atapi_sense_complete;
Jeff Garzika939c962005-10-05 17:09:16 -04002197
Tejun Heo8e0e6942006-03-31 20:41:11 +09002198 ata_qc_issue(qc);
Jeff Garzika939c962005-10-05 17:09:16 -04002199
2200 DPRINTK("EXIT\n");
2201}
2202
Tejun Heo77853bf2006-01-23 13:09:36 +09002203static void atapi_qc_complete(struct ata_queued_cmd *qc)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002204{
2205 struct scsi_cmnd *cmd = qc->scsicmd;
Albert Leea22e2eb2005-12-05 15:38:02 +08002206 unsigned int err_mask = qc->err_mask;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002207
Jeff Garzika7dac442005-10-30 04:44:42 -05002208 VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
Jeff Garzike12669e2005-10-05 18:39:23 -04002209
Jeff Garzika7dac442005-10-30 04:44:42 -05002210 if (unlikely(err_mask & AC_ERR_DEV)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002211 cmd->result = SAM_STAT_CHECK_CONDITION;
Jeff Garzikc6e6e6662005-11-14 14:50:05 -05002212 atapi_request_sense(qc);
Tejun Heo77853bf2006-01-23 13:09:36 +09002213 return;
Jeff Garzike12669e2005-10-05 18:39:23 -04002214 }
2215
Jeff Garzika7dac442005-10-30 04:44:42 -05002216 else if (unlikely(err_mask))
2217 /* FIXME: not quite right; we don't want the
2218 * translation of taskfile registers into
2219 * a sense descriptors, since that's only
2220 * correct for ATA, not ATAPI
2221 */
2222 ata_gen_ata_desc_sense(qc);
2223
Jeff Garzike12669e2005-10-05 18:39:23 -04002224 else {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002225 u8 *scsicmd = cmd->cmnd;
2226
Tony Battersbyfd71da42005-12-21 16:35:44 -05002227 if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002228 u8 *buf = NULL;
2229 unsigned int buflen;
2230
2231 buflen = ata_scsi_rbuf_get(cmd, &buf);
Jeff Garzika15dbeb2005-10-05 15:02:14 -04002232
2233 /* ATAPI devices typically report zero for their SCSI version,
2234 * and sometimes deviate from the spec WRT response data
2235 * format. If SCSI version is reported as zero like normal,
2236 * then we make the following fixups: 1) Fake MMC-5 version,
2237 * to indicate to the Linux scsi midlayer this is a modern
2238 * device. 2) Ensure response data format / ATAPI information
2239 * are always correct.
2240 */
Jeff Garzika15dbeb2005-10-05 15:02:14 -04002241 if (buf[2] == 0) {
2242 buf[2] = 0x5;
2243 buf[3] = 0x32;
2244 }
2245
Linus Torvalds1da177e2005-04-16 15:20:36 -07002246 ata_scsi_rbuf_put(cmd, buf);
2247 }
Jeff Garzika15dbeb2005-10-05 15:02:14 -04002248
Linus Torvalds1da177e2005-04-16 15:20:36 -07002249 cmd->result = SAM_STAT_GOOD;
2250 }
2251
2252 qc->scsidone(cmd);
Tejun Heo77853bf2006-01-23 13:09:36 +09002253 ata_qc_free(qc);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002254}
2255/**
2256 * atapi_xlat - Initialize PACKET taskfile
2257 * @qc: command structure to be initialized
2258 * @scsicmd: SCSI CDB associated with this PACKET command
2259 *
2260 * LOCKING:
2261 * spin_lock_irqsave(host_set lock)
2262 *
2263 * RETURNS:
2264 * Zero on success, non-zero on failure.
2265 */
2266
Jeff Garzik057ace52005-10-22 14:27:05 -04002267static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002268{
2269 struct scsi_cmnd *cmd = qc->scsicmd;
2270 struct ata_device *dev = qc->dev;
2271 int using_pio = (dev->flags & ATA_DFLAG_PIO);
be7db052005-04-17 15:26:13 -05002272 int nodata = (cmd->sc_data_direction == DMA_NONE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002273
2274 if (!using_pio)
2275 /* Check whether ATAPI DMA is safe */
2276 if (ata_check_atapi_dma(qc))
2277 using_pio = 1;
2278
Tejun Heo6e7846e2006-02-12 23:32:58 +09002279 memcpy(&qc->cdb, scsicmd, dev->cdb_len);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002280
2281 qc->complete_fn = atapi_qc_complete;
2282
2283 qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
be7db052005-04-17 15:26:13 -05002284 if (cmd->sc_data_direction == DMA_TO_DEVICE) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002285 qc->tf.flags |= ATA_TFLAG_WRITE;
2286 DPRINTK("direction: write\n");
2287 }
2288
2289 qc->tf.command = ATA_CMD_PACKET;
2290
2291 /* no data, or PIO data xfer */
2292 if (using_pio || nodata) {
2293 if (nodata)
2294 qc->tf.protocol = ATA_PROT_ATAPI_NODATA;
2295 else
2296 qc->tf.protocol = ATA_PROT_ATAPI;
2297 qc->tf.lbam = (8 * 1024) & 0xff;
2298 qc->tf.lbah = (8 * 1024) >> 8;
2299 }
2300
2301 /* DMA data xfer */
2302 else {
2303 qc->tf.protocol = ATA_PROT_ATAPI_DMA;
2304 qc->tf.feature |= ATAPI_PKT_DMA;
2305
2306#ifdef ATAPI_ENABLE_DMADIR
2307 /* some SATA bridges need us to indicate data xfer direction */
be7db052005-04-17 15:26:13 -05002308 if (cmd->sc_data_direction != DMA_TO_DEVICE)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002309 qc->tf.feature |= ATAPI_DMADIR;
2310#endif
2311 }
2312
2313 qc->nbytes = cmd->bufflen;
2314
2315 return 0;
2316}
2317
2318/**
2319 * ata_scsi_find_dev - lookup ata_device from scsi_cmnd
2320 * @ap: ATA port to which the device is attached
2321 * @scsidev: SCSI device from which we derive the ATA device
2322 *
2323 * Given various information provided in struct scsi_cmnd,
2324 * map that onto an ATA bus, and using that mapping
2325 * determine which ata_device is associated with the
2326 * SCSI command to be sent.
2327 *
2328 * LOCKING:
2329 * spin_lock_irqsave(host_set lock)
2330 *
2331 * RETURNS:
2332 * Associated ATA device, or %NULL if not found.
2333 */
2334
2335static struct ata_device *
Jeff Garzik057ace52005-10-22 14:27:05 -04002336ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002337{
2338 struct ata_device *dev;
2339
2340 /* skip commands not addressed to targets we simulate */
2341 if (likely(scsidev->id < ATA_MAX_DEVICES))
2342 dev = &ap->device[scsidev->id];
2343 else
2344 return NULL;
2345
2346 if (unlikely((scsidev->channel != 0) ||
2347 (scsidev->lun != 0)))
2348 return NULL;
2349
2350 if (unlikely(!ata_dev_present(dev)))
2351 return NULL;
2352
Jeff Garzik50630192005-12-13 02:29:45 -05002353 if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) {
2354 if (unlikely(dev->class == ATA_DEV_ATAPI)) {
2355 printk(KERN_WARNING "ata%u(%u): WARNING: ATAPI is %s, device ignored.\n",
2356 ap->id, dev->devno, atapi_enabled ? "not supported with this driver" : "disabled");
Jeff Garzik1623c812005-08-30 03:37:42 -04002357 return NULL;
Jeff Garzik50630192005-12-13 02:29:45 -05002358 }
Jeff Garzik1623c812005-08-30 03:37:42 -04002359 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002360
2361 return dev;
2362}
2363
Jeff Garzikb0955182005-05-12 15:45:22 -04002364/*
2365 * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value.
2366 * @byte1: Byte 1 from pass-thru CDB.
2367 *
2368 * RETURNS:
2369 * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise.
2370 */
2371static u8
2372ata_scsi_map_proto(u8 byte1)
2373{
2374 switch((byte1 & 0x1e) >> 1) {
2375 case 3: /* Non-data */
2376 return ATA_PROT_NODATA;
2377
2378 case 6: /* DMA */
2379 return ATA_PROT_DMA;
2380
2381 case 4: /* PIO Data-in */
2382 case 5: /* PIO Data-out */
Jeff Garzikb0955182005-05-12 15:45:22 -04002383 return ATA_PROT_PIO;
2384
2385 case 10: /* Device Reset */
2386 case 0: /* Hard Reset */
2387 case 1: /* SRST */
2388 case 2: /* Bus Idle */
2389 case 7: /* Packet */
2390 case 8: /* DMA Queued */
2391 case 9: /* Device Diagnostic */
2392 case 11: /* UDMA Data-in */
2393 case 12: /* UDMA Data-Out */
2394 case 13: /* FPDMA */
2395 default: /* Reserved */
2396 break;
2397 }
2398
2399 return ATA_PROT_UNKNOWN;
2400}
2401
2402/**
2403 * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
2404 * @qc: command structure to be initialized
Randy Dunlap8e8b77d2005-11-01 21:29:27 -08002405 * @scsicmd: SCSI command to convert
Jeff Garzikb0955182005-05-12 15:45:22 -04002406 *
2407 * Handles either 12 or 16-byte versions of the CDB.
2408 *
2409 * RETURNS:
2410 * Zero on success, non-zero on failure.
2411 */
2412static unsigned int
Douglas Gilbert00ac37f2005-10-28 15:58:28 -04002413ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
Jeff Garzikb0955182005-05-12 15:45:22 -04002414{
2415 struct ata_taskfile *tf = &(qc->tf);
2416 struct scsi_cmnd *cmd = qc->scsicmd;
2417
2418 if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
Tejun Heo9a405252005-12-02 11:49:11 +09002419 goto invalid_fld;
Jeff Garzikb0955182005-05-12 15:45:22 -04002420
Albert Leef59b0cf2006-03-16 17:59:22 +08002421 if (scsicmd[1] & 0xe0)
2422 /* PIO multi not supported yet */
2423 goto invalid_fld;
2424
Jeff Garzikb0955182005-05-12 15:45:22 -04002425 /*
2426 * 12 and 16 byte CDBs use different offsets to
2427 * provide the various register values.
2428 */
2429 if (scsicmd[0] == ATA_16) {
2430 /*
2431 * 16-byte CDB - may contain extended commands.
2432 *
2433 * If that is the case, copy the upper byte register values.
2434 */
2435 if (scsicmd[1] & 0x01) {
2436 tf->hob_feature = scsicmd[3];
2437 tf->hob_nsect = scsicmd[5];
2438 tf->hob_lbal = scsicmd[7];
2439 tf->hob_lbam = scsicmd[9];
2440 tf->hob_lbah = scsicmd[11];
2441 tf->flags |= ATA_TFLAG_LBA48;
2442 } else
2443 tf->flags &= ~ATA_TFLAG_LBA48;
2444
2445 /*
2446 * Always copy low byte, device and command registers.
2447 */
2448 tf->feature = scsicmd[4];
2449 tf->nsect = scsicmd[6];
2450 tf->lbal = scsicmd[8];
2451 tf->lbam = scsicmd[10];
2452 tf->lbah = scsicmd[12];
2453 tf->device = scsicmd[13];
2454 tf->command = scsicmd[14];
2455 } else {
2456 /*
2457 * 12-byte CDB - incapable of extended commands.
2458 */
2459 tf->flags &= ~ATA_TFLAG_LBA48;
2460
2461 tf->feature = scsicmd[3];
2462 tf->nsect = scsicmd[4];
2463 tf->lbal = scsicmd[5];
2464 tf->lbam = scsicmd[6];
2465 tf->lbah = scsicmd[7];
2466 tf->device = scsicmd[8];
2467 tf->command = scsicmd[9];
2468 }
Mark Lorddcc2d1e2005-11-13 16:22:06 -05002469 /*
2470 * If slave is possible, enforce correct master/slave bit
2471 */
2472 if (qc->ap->flags & ATA_FLAG_SLAVE_POSS)
2473 tf->device = qc->dev->devno ?
2474 tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
Jeff Garzikb0955182005-05-12 15:45:22 -04002475
2476 /*
2477 * Filter SET_FEATURES - XFER MODE command -- otherwise,
2478 * SET_FEATURES - XFER MODE must be preceded/succeeded
2479 * by an update to hardware-specific registers for each
2480 * controller (i.e. the reason for ->set_piomode(),
2481 * ->set_dmamode(), and ->post_set_mode() hooks).
2482 */
2483 if ((tf->command == ATA_CMD_SET_FEATURES)
2484 && (tf->feature == SETFEATURES_XFER))
Tejun Heo9a405252005-12-02 11:49:11 +09002485 goto invalid_fld;
Jeff Garzikb0955182005-05-12 15:45:22 -04002486
2487 /*
2488 * Set flags so that all registers will be written,
2489 * and pass on write indication (used for PIO/DMA
2490 * setup.)
2491 */
2492 tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
2493
Jeff Garzik0274aa22005-06-22 13:50:56 -04002494 if (cmd->sc_data_direction == DMA_TO_DEVICE)
Jeff Garzikb0955182005-05-12 15:45:22 -04002495 tf->flags |= ATA_TFLAG_WRITE;
2496
2497 /*
2498 * Set transfer length.
2499 *
2500 * TODO: find out if we need to do more here to
2501 * cover scatter/gather case.
2502 */
2503 qc->nsect = cmd->bufflen / ATA_SECT_SIZE;
2504
2505 return 0;
Tejun Heo9a405252005-12-02 11:49:11 +09002506
2507 invalid_fld:
2508 ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00);
2509 /* "Invalid field in cdb" */
2510 return 1;
Jeff Garzikb0955182005-05-12 15:45:22 -04002511}
2512
Linus Torvalds1da177e2005-04-16 15:20:36 -07002513/**
2514 * ata_get_xlat_func - check if SCSI to ATA translation is possible
2515 * @dev: ATA device
2516 * @cmd: SCSI command opcode to consider
2517 *
2518 * Look up the SCSI command given, and determine whether the
2519 * SCSI command is to be translated or simulated.
2520 *
2521 * RETURNS:
2522 * Pointer to translation function if possible, %NULL if not.
2523 */
2524
2525static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
2526{
2527 switch (cmd) {
2528 case READ_6:
2529 case READ_10:
2530 case READ_16:
2531
2532 case WRITE_6:
2533 case WRITE_10:
2534 case WRITE_16:
2535 return ata_scsi_rw_xlat;
2536
2537 case SYNCHRONIZE_CACHE:
2538 if (ata_try_flush_cache(dev))
2539 return ata_scsi_flush_xlat;
2540 break;
2541
2542 case VERIFY:
2543 case VERIFY_16:
2544 return ata_scsi_verify_xlat;
Jeff Garzikb0955182005-05-12 15:45:22 -04002545
2546 case ATA_12:
2547 case ATA_16:
2548 return ata_scsi_pass_thru;
Jeff Garzikda613962005-08-29 19:01:43 -04002549
Douglas Gilbert972dcaf2005-08-11 03:35:53 -04002550 case START_STOP:
2551 return ata_scsi_start_stop_xlat;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002552 }
2553
2554 return NULL;
2555}
2556
2557/**
2558 * ata_scsi_dump_cdb - dump SCSI command contents to dmesg
2559 * @ap: ATA port to which the command was being sent
2560 * @cmd: SCSI command to dump
2561 *
2562 * Prints the contents of a SCSI command via printk().
2563 */
2564
2565static inline void ata_scsi_dump_cdb(struct ata_port *ap,
2566 struct scsi_cmnd *cmd)
2567{
2568#ifdef ATA_DEBUG
2569 struct scsi_device *scsidev = cmd->device;
2570 u8 *scsicmd = cmd->cmnd;
2571
2572 DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
2573 ap->id,
2574 scsidev->channel, scsidev->id, scsidev->lun,
2575 scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
2576 scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
2577 scsicmd[8]);
2578#endif
2579}
2580
Brian Kingeb3f0f92006-03-23 17:30:02 -06002581static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
2582 struct ata_port *ap, struct ata_device *dev)
2583{
2584 if (dev->class == ATA_DEV_ATA) {
2585 ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
2586 cmd->cmnd[0]);
2587
2588 if (xlat_func)
2589 ata_scsi_translate(ap, dev, cmd, done, xlat_func);
2590 else
2591 ata_scsi_simulate(ap, dev, cmd, done);
2592 } else
2593 ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
2594}
2595
Linus Torvalds1da177e2005-04-16 15:20:36 -07002596/**
2597 * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
2598 * @cmd: SCSI command to be sent
2599 * @done: Completion function, called when command is complete
2600 *
2601 * In some cases, this function translates SCSI commands into
2602 * ATA taskfiles, and queues the taskfiles to be sent to
2603 * hardware. In other cases, this function simulates a
2604 * SCSI device by evaluating and responding to certain
2605 * SCSI commands. This creates the overall effect of
2606 * ATA and ATAPI devices appearing as SCSI devices.
2607 *
2608 * LOCKING:
2609 * Releases scsi-layer-held lock, and obtains host_set lock.
2610 *
2611 * RETURNS:
2612 * Zero.
2613 */
2614
2615int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
2616{
2617 struct ata_port *ap;
2618 struct ata_device *dev;
2619 struct scsi_device *scsidev = cmd->device;
Jeff Garzik005a5a02005-10-30 23:31:48 -05002620 struct Scsi_Host *shost = scsidev->host;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002621
Jeff Garzik005a5a02005-10-30 23:31:48 -05002622 ap = (struct ata_port *) &shost->hostdata[0];
2623
2624 spin_unlock(shost->host_lock);
2625 spin_lock(&ap->host_set->lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002626
2627 ata_scsi_dump_cdb(ap, cmd);
2628
2629 dev = ata_scsi_find_dev(ap, scsidev);
Brian Kingeb3f0f92006-03-23 17:30:02 -06002630 if (likely(dev))
2631 __ata_scsi_queuecmd(cmd, done, ap, dev);
2632 else {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002633 cmd->result = (DID_BAD_TARGET << 16);
2634 done(cmd);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002635 }
2636
Jeff Garzik005a5a02005-10-30 23:31:48 -05002637 spin_unlock(&ap->host_set->lock);
2638 spin_lock(shost->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002639 return 0;
2640}
2641
2642/**
2643 * ata_scsi_simulate - simulate SCSI command on ATA device
Randy Dunlapc893a3a2006-01-28 13:15:32 -05002644 * @ap: port the device is connected to
2645 * @dev: the target device
Linus Torvalds1da177e2005-04-16 15:20:36 -07002646 * @cmd: SCSI command being sent to device.
2647 * @done: SCSI command completion function.
2648 *
2649 * Interprets and directly executes a select list of SCSI commands
2650 * that can be handled internally.
2651 *
2652 * LOCKING:
2653 * spin_lock_irqsave(host_set lock)
2654 */
2655
Tejun Heo9a3dccc2006-01-06 09:56:18 +01002656void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002657 struct scsi_cmnd *cmd,
2658 void (*done)(struct scsi_cmnd *))
2659{
2660 struct ata_scsi_args args;
Jeff Garzik057ace52005-10-22 14:27:05 -04002661 const u8 *scsicmd = cmd->cmnd;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002662
Tejun Heo9a3dccc2006-01-06 09:56:18 +01002663 args.ap = ap;
2664 args.dev = dev;
2665 args.id = dev->id;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002666 args.cmd = cmd;
2667 args.done = done;
2668
2669 switch(scsicmd[0]) {
2670 /* no-op's, complete with success */
2671 case SYNCHRONIZE_CACHE:
2672 case REZERO_UNIT:
2673 case SEEK_6:
2674 case SEEK_10:
2675 case TEST_UNIT_READY:
2676 case FORMAT_UNIT: /* FIXME: correct? */
2677 case SEND_DIAGNOSTIC: /* FIXME: correct? */
2678 ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
2679 break;
2680
2681 case INQUIRY:
2682 if (scsicmd[1] & 2) /* is CmdDt set? */
Douglas Gilbertae006512005-10-09 09:09:35 -04002683 ata_scsi_invalid_field(cmd, done);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002684 else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */
2685 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
2686 else if (scsicmd[2] == 0x00)
2687 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00);
2688 else if (scsicmd[2] == 0x80)
2689 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80);
2690 else if (scsicmd[2] == 0x83)
2691 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83);
2692 else
Douglas Gilbertae006512005-10-09 09:09:35 -04002693 ata_scsi_invalid_field(cmd, done);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002694 break;
2695
2696 case MODE_SENSE:
2697 case MODE_SENSE_10:
2698 ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense);
2699 break;
2700
2701 case MODE_SELECT: /* unconditionally return */
2702 case MODE_SELECT_10: /* bad-field-in-cdb */
Douglas Gilbertae006512005-10-09 09:09:35 -04002703 ata_scsi_invalid_field(cmd, done);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002704 break;
2705
2706 case READ_CAPACITY:
2707 ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
2708 break;
2709
2710 case SERVICE_ACTION_IN:
2711 if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
2712 ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
2713 else
Douglas Gilbertae006512005-10-09 09:09:35 -04002714 ata_scsi_invalid_field(cmd, done);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002715 break;
2716
2717 case REPORT_LUNS:
2718 ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns);
2719 break;
2720
Jeff Garzikb0955182005-05-12 15:45:22 -04002721 /* mandatory commands we haven't implemented yet */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002722 case REQUEST_SENSE:
2723
2724 /* all other commands */
2725 default:
Douglas Gilbertae006512005-10-09 09:09:35 -04002726 ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0);
2727 /* "Invalid command operation code" */
2728 done(cmd);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002729 break;
2730 }
2731}
2732
Jeff Garzik644dd0c2005-10-03 15:55:19 -04002733void ata_scsi_scan_host(struct ata_port *ap)
2734{
Jeff Garzik3f19ee82005-10-03 21:36:41 -04002735 struct ata_device *dev;
Jeff Garzik644dd0c2005-10-03 15:55:19 -04002736 unsigned int i;
2737
2738 if (ap->flags & ATA_FLAG_PORT_DISABLED)
2739 return;
2740
Jeff Garzik3f19ee82005-10-03 21:36:41 -04002741 for (i = 0; i < ATA_MAX_DEVICES; i++) {
2742 dev = &ap->device[i];
2743
2744 if (ata_dev_present(dev))
2745 scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0);
2746 }
Jeff Garzik644dd0c2005-10-03 15:55:19 -04002747}
2748