blob: 8dec796222a0ac8fe8210b125a45227dc9ead4ad [file] [log] [blame]
Greg Kroah-Hartman815ddc92006-05-12 11:05:29 -07001/*
2 * ark3116
3 * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
4 * productid=0x0232) (used in a datacable called KQ-U8A)
5 *
6 * - based on code by krisfx -> thanks !!
7 * (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
8 *
9 * - based on logs created by usbsnoopy
10 *
11 * Author : Simon Schulz [ark3116_driver<AT>auctionant.de]
12 *
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License as published by the
15 * Free Software Foundation; either version 2 of the License, or (at your
16 * option) any later version.
17 */
18
19#include <linux/kernel.h>
20#include <linux/init.h>
21#include <linux/tty.h>
22#include <linux/module.h>
23#include <linux/usb.h>
24#include "usb-serial.h"
25
26
27static int debug;
28
29static struct usb_device_id id_table [] = {
30 { USB_DEVICE(0x6547, 0x0232) },
31 { },
32};
33MODULE_DEVICE_TABLE(usb, id_table);
34
35struct ark3116_private {
36 spinlock_t lock;
37 u8 termios_initialized;
38};
39
40static inline void ARK3116_SND(struct usb_serial *serial, int seq,
41 __u8 request, __u8 requesttype,
42 __u16 value, __u16 index)
43{
44 int result;
45 result = usb_control_msg(serial->dev,
46 usb_sndctrlpipe(serial->dev,0),
47 request, requesttype, value, index,
48 NULL,0x00, 1000);
49 dbg("%03d > ok",seq);
50}
51
52static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
53 __u8 request, __u8 requesttype,
54 __u16 value, __u16 index, __u8 expected,
55 char *buf)
56{
57 int result;
58 result = usb_control_msg(serial->dev,
59 usb_rcvctrlpipe(serial->dev,0),
60 request, requesttype, value, index,
61 buf, 0x0000001, 1000);
62 if (result)
63 dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
64 else
65 dbg("%03d < 0 bytes", seq);
66}
67
68
69static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
70 __u8 request, __u8 requesttype,
71 __u16 value, __u16 index, char *buf)
72{
73 usb_control_msg(serial->dev,
74 usb_rcvctrlpipe(serial->dev,0),
75 request, requesttype, value, index,
76 buf, 0x0000001, 1000);
77}
78
79
80static int ark3116_attach(struct usb_serial *serial)
81{
82 char *buf;
83 struct ark3116_private *priv;
84 int i;
85
86 for (i = 0; i < serial->num_ports; ++i) {
87 priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
88 if (!priv)
89 goto cleanup;
90 memset (priv, 0x00, sizeof (struct ark3116_private));
91 spin_lock_init(&priv->lock);
92
93 usb_set_serial_port_data(serial->port[i], priv);
94 }
95
96 buf = kmalloc(1, GFP_KERNEL);
97 if (!buf) {
98 dbg("error kmalloc -> out of mem ?");
99 goto cleanup;
100 }
101
102 /* 3 */
103 ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
104 ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
105 ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
106 ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
107
108 /* <-- seq7 */
109 ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
110 ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
111 ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
112 ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
113 ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
114
115 /* <-- seq12 */
116 ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
117 ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
118
119 /* 14 */
120 ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
121 ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
122
123 /* 16 */
124 ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
125 /* --> seq17 */
126 ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
127
128 /* <-- seq18 */
129 ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
130
131 /* --> seq19 */
132 ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
133
134
135 /* <-- seq20 */
136 /* seems like serial port status info (RTS, CTS,...) */
137 /* returns modem control line status ?! */
138 ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
139
140 /* set 9600 baud & do some init ?! */
141 ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
142 ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
143 ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
144 ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
145 ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
146 ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
147 ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
148 ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
149
150 kfree(buf);
151 return(0);
152
153cleanup:
154 for (--i; i>=0; --i)
155 usb_set_serial_port_data(serial->port[i], NULL);
156 return -ENOMEM;
157}
158
159static void ark3116_set_termios(struct usb_serial_port *port,
160 struct termios *old_termios)
161{
162 struct usb_serial *serial = port->serial;
163 struct ark3116_private *priv = usb_get_serial_port_data(port);
164 unsigned int cflag = port->tty->termios->c_cflag;
165 unsigned long flags;
166 int baud;
167 int ark3116_baud;
168 char *buf;
169 char config;
170
171 config = 0;
172
173 dbg("%s - port %d", __FUNCTION__, port->number);
174
175 if ((!port->tty) || (!port->tty->termios)) {
176 dbg("%s - no tty structures", __FUNCTION__);
177 return;
178 }
179
180 spin_lock_irqsave(&priv->lock, flags);
181 if (!priv->termios_initialized) {
182 *(port->tty->termios) = tty_std_termios;
183 port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
184 priv->termios_initialized = 1;
185 }
186 spin_unlock_irqrestore(&priv->lock, flags);
187
188 cflag = port->tty->termios->c_cflag;
189
190 /* check that they really want us to change something: */
191 if (old_termios) {
192 if ((cflag == old_termios->c_cflag) &&
193 (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
194 RELEVANT_IFLAG(old_termios->c_iflag))) {
195 dbg("%s - nothing to change...", __FUNCTION__);
196 return;
197 }
198 }
199
200 buf = kmalloc(1, GFP_KERNEL);
201 if (!buf) {
202 dbg("error kmalloc");
203 return;
204 }
205
206 /* set data bit count (8/7/6/5) */
207 if (cflag & CSIZE){
208 switch (cflag & CSIZE){
209 case CS5:
210 config |= 0x00;
211 dbg("setting CS5");
212 break;
213 case CS6:
214 config |= 0x01;
215 dbg("setting CS6");
216 break;
217 case CS7:
218 config |= 0x02;
219 dbg("setting CS7");
220 break;
221 default:
222 err ("CSIZE was set but not CS5-CS8, using CS8!");
223 case CS8:
224 config |= 0x03;
225 dbg("setting CS8");
226 break;
227 }
228 }
229
230 /* set parity (NONE,EVEN,ODD) */
231 if (cflag & PARENB){
232 if (cflag & PARODD) {
233 config |= 0x08;
234 dbg("setting parity to ODD");
235 } else {
236 config |= 0x18;
237 dbg("setting parity to EVEN");
238 }
239 } else {
240 dbg("setting parity to NONE");
241 }
242
243 /* SET STOPBIT (1/2) */
244 if (cflag & CSTOPB) {
245 config |= 0x04;
246 dbg ("setting 2 stop bits");
247 } else {
248 dbg ("setting 1 stop bit");
249 }
250
251
252 /* set baudrate: */
253 baud = 0;
254 switch (cflag & CBAUD){
255 case B0:
256 err("can't set 0baud, using 9600 instead");
257 break;
258 case B75: baud = 75; break;
259 case B150: baud = 150; break;
260 case B300: baud = 300; break;
261 case B600: baud = 600; break;
262 case B1200: baud = 1200; break;
263 case B1800: baud = 1800; break;
264 case B2400: baud = 2400; break;
265 case B4800: baud = 4800; break;
266 case B9600: baud = 9600; break;
267 case B19200: baud = 19200; break;
268 case B38400: baud = 38400; break;
269 case B57600: baud = 57600; break;
270 case B115200: baud = 115200; break;
271 case B230400: baud = 230400; break;
272 case B460800: baud = 460800; break;
273 default:
274 dbg("does not support the baudrate requested (fix it)");
275 break;
276 }
277
278 /* set 9600 as default (if given baudrate is invalid for example) */
279 if (baud == 0)
280 baud = 9600;
281
282 /*
283 * found by try'n'error, be careful, maybe there are other options
284 * for multiplicator etc!
285 */
286 if (baud == 460800)
287 /* strange, for 460800 the formula is wrong
288 * (dont use round(), then 9600baud is wrong) */
289 ark3116_baud = 7;
290 else
291 ark3116_baud = 3000000 / baud;
292
293 /* ? */
294 ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
295 /* offset = buf[0]; */
296 /* offset = 0x03; */
297 /* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
298
299
300 /* set baudrate */
301 dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
302 ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
303 ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF) ,0x0000);
304 ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
305 ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
306
307 /* ? */
308 ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
309 ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
310
311 /* set data bit count, stop bit count & parity: */
312 dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
313 ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
314 ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
315
316 if (cflag & CRTSCTS)
317 dbg("CRTSCTS not supported by chipset ?!");
318
319 /* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
320
321 kfree(buf);
322 return;
323}
324
325static int ark3116_open(struct usb_serial_port *port, struct file *filp)
326{
327 struct termios tmp_termios;
328 struct usb_serial *serial = port->serial;
329 char *buf;
330 int result = 0;
331
332 dbg("%s - port %d", __FUNCTION__, port->number);
333
334 buf = kmalloc(1, GFP_KERNEL);
335 if (!buf) {
336 dbg("error kmalloc -> out of mem ?");
337 return -ENOMEM;
338 }
339
340 result = usb_serial_generic_open(port, filp);
341 if (result)
342 return result;
343
344 /* open */
345 ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
346
347 ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
348 ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
349 ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
350 ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
351
352 ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
353 ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
354
355 ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
356 ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
357
358 ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
359
360 ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
361
362 ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
363
364 ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
365
366 /* returns different values (control lines ?!) */
367 ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
368
369 /* initialise termios: */
370 if (port->tty)
371 ark3116_set_termios(port, &tmp_termios);
372
373 kfree(buf);
374
375 return result;
376
377}
378
379static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
380 unsigned int cmd, unsigned long arg)
381{
382 dbg("ioctl not supported yet...");
383 return -ENOIOCTLCMD;
384}
385
386static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
387{
388 struct usb_serial *serial = port->serial;
389 char *buf;
390 char temp;
391
392 /* seems like serial port status info (RTS, CTS,...) is stored
393 * in reg(?) 0x0006
394 * pcb connection point 11 = GND -> sets bit4 of response
395 * pcb connection point 7 = GND -> sets bit6 of response
396 */
397
398 buf = kmalloc(1, GFP_KERNEL);
399 if (!buf) {
400 dbg("error kmalloc");
401 return -ENOMEM;
402 }
403
404 /* read register: */
405 ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
406 temp = buf[0];
407 kfree(buf);
408
409 /* i do not really know if bit4=CTS and bit6=DSR... was just a
410 * quick guess !!
411 */
412 return (temp & (1<<4) ? TIOCM_CTS : 0) |
413 (temp & (1<<6) ? TIOCM_DSR : 0);
414}
415
416static struct usb_driver ark3116_driver = {
417 .name = "ark3116",
418 .probe = usb_serial_probe,
419 .disconnect = usb_serial_disconnect,
420 .id_table = id_table,
421};
422
423static struct usb_serial_driver ark3116_device = {
424 .driver = {
425 .owner = THIS_MODULE,
426 .name = "ark3116",
427 },
428 .id_table = id_table,
429 .num_interrupt_in = 1,
430 .num_bulk_in = 1,
431 .num_bulk_out = 1,
432 .num_ports = 1,
433 .attach = ark3116_attach,
434 .set_termios = ark3116_set_termios,
435 .ioctl = ark3116_ioctl,
436 .tiocmget = ark3116_tiocmget,
437 .open = ark3116_open,
438};
439
440static int __init ark3116_init(void)
441{
442 int retval;
443
444 retval = usb_serial_register(&ark3116_device);
445 if (retval)
446 return retval;
447 retval = usb_register(&ark3116_driver);
448 if (retval)
449 usb_serial_deregister(&ark3116_device);
450 return retval;
451}
452
453static void __exit ark3116_exit(void)
454{
455 usb_deregister(&ark3116_driver);
456 usb_serial_deregister(&ark3116_device);
457}
458
459module_init(ark3116_init);
460module_exit(ark3116_exit);
461MODULE_LICENSE("GPL");
462
463module_param(debug, bool, S_IRUGO | S_IWUSR);
464MODULE_PARM_DESC(debug, "Debug enabled or not");
465