blob: d0d75b65ddd6df2a070b162c178322e48fbf1239 [file] [log] [blame]
Kukjin Kim5aa93c02013-01-21 15:34:19 -08001/*
Ben Dooksccae9412009-11-13 22:54:14 +00002 * Copyright (c) 2006-2009 Simtec Electronics
Ben Dooks342e20f2009-07-30 23:23:29 +01003 * http://armlinux.simtec.co.uk/
4 * Ben Dooks <ben@simtec.co.uk>
5 * Vincent Sanders <vince@simtec.co.uk>
6 *
7 * S3C2440/S3C2442 CPU Frequency scaling
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
Joe Perches1c5864e2016-04-05 13:28:25 -070014#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
15
Ben Dooks342e20f2009-07-30 23:23:29 +010016#include <linux/init.h>
17#include <linux/module.h>
18#include <linux/interrupt.h>
19#include <linux/ioport.h>
20#include <linux/cpufreq.h>
Kay Sievers4a858cf2011-12-21 16:01:38 -080021#include <linux/device.h>
Ben Dooks342e20f2009-07-30 23:23:29 +010022#include <linux/delay.h>
23#include <linux/clk.h>
24#include <linux/err.h>
25#include <linux/io.h>
26
Ben Dooks342e20f2009-07-30 23:23:29 +010027#include <asm/mach/arch.h>
28#include <asm/mach/map.h>
29
30#include <mach/regs-clock.h>
31
32#include <plat/cpu.h>
33#include <plat/cpu-freq-core.h>
Ben Dooks342e20f2009-07-30 23:23:29 +010034
35static struct clk *xtal;
36static struct clk *fclk;
37static struct clk *hclk;
38static struct clk *armclk;
39
40/* HDIV: 1, 2, 3, 4, 6, 8 */
41
42static inline int within_khz(unsigned long a, unsigned long b)
43{
44 long diff = a - b;
45
46 return (diff >= -1000 && diff <= 1000);
47}
48
49/**
50 * s3c2440_cpufreq_calcdivs - calculate divider settings
51 * @cfg: The cpu frequency settings.
52 *
53 * Calcualte the divider values for the given frequency settings
54 * specified in @cfg. The values are stored in @cfg for later use
55 * by the relevant set routine if the request settings can be reached.
56 */
Sachin Kamat8f82b192014-01-03 14:57:36 +053057static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
Ben Dooks342e20f2009-07-30 23:23:29 +010058{
59 unsigned int hdiv, pdiv;
60 unsigned long hclk, fclk, armclk;
61 unsigned long hclk_max;
62
63 fclk = cfg->freq.fclk;
64 armclk = cfg->freq.armclk;
65 hclk_max = cfg->max.hclk;
66
67 s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
68 __func__, fclk, armclk, hclk_max);
69
70 if (armclk > fclk) {
Joe Perchesb49c22a2016-04-05 13:28:24 -070071 pr_warn("%s: armclk > fclk\n", __func__);
Ben Dooks342e20f2009-07-30 23:23:29 +010072 armclk = fclk;
73 }
74
75 /* if we are in DVS, we need HCLK to be <= ARMCLK */
76 if (armclk < fclk && armclk < hclk_max)
77 hclk_max = armclk;
78
79 for (hdiv = 1; hdiv < 9; hdiv++) {
80 if (hdiv == 5 || hdiv == 7)
81 hdiv++;
82
83 hclk = (fclk / hdiv);
84 if (hclk <= hclk_max || within_khz(hclk, hclk_max))
85 break;
86 }
87
88 s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
89
90 if (hdiv > 8)
91 goto invalid;
92
93 pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
94
95 if ((hclk / pdiv) > cfg->max.pclk)
96 pdiv++;
97
98 s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
99
100 if (pdiv > 2)
101 goto invalid;
102
103 pdiv *= hdiv;
104
105 /* calculate a valid armclk */
106
107 if (armclk < hclk)
108 armclk = hclk;
109
110 /* if we're running armclk lower than fclk, this really means
111 * that the system should go into dvs mode, which means that
112 * armclk is connected to hclk. */
113 if (armclk < fclk) {
114 cfg->divs.dvs = 1;
115 armclk = hclk;
116 } else
117 cfg->divs.dvs = 0;
118
119 cfg->freq.armclk = armclk;
120
121 /* store the result, and then return */
122
123 cfg->divs.h_divisor = hdiv;
124 cfg->divs.p_divisor = pdiv;
125
126 return 0;
127
128 invalid:
129 return -EINVAL;
130}
131
132#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
133 S3C2440_CAMDIVN_HCLK4_HALF)
134
135/**
136 * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
137 * @cfg: The cpu frequency settings.
138 *
139 * Set the divisors from the settings in @cfg, which where generated
140 * during the calculation phase by s3c2440_cpufreq_calcdivs().
141 */
142static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
143{
144 unsigned long clkdiv, camdiv;
145
146 s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
147 cfg->divs.h_divisor, cfg->divs.p_divisor);
148
149 clkdiv = __raw_readl(S3C2410_CLKDIVN);
150 camdiv = __raw_readl(S3C2440_CAMDIVN);
151
152 clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
153 camdiv &= ~CAMDIVN_HCLK_HALF;
154
155 switch (cfg->divs.h_divisor) {
156 case 1:
157 clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
158 break;
159
160 case 2:
161 clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
162 break;
163
164 case 6:
165 camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
166 case 3:
167 clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
168 break;
169
170 case 8:
171 camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
172 case 4:
173 clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
174 break;
175
176 default:
177 BUG(); /* we don't expect to get here. */
178 }
179
180 if (cfg->divs.p_divisor != cfg->divs.h_divisor)
181 clkdiv |= S3C2440_CLKDIVN_PDIVN;
182
183 /* todo - set pclk. */
184
185 /* Write the divisors first with hclk intentionally halved so that
186 * when we write clkdiv we will under-frequency instead of over. We
187 * then make a short delay and remove the hclk halving if necessary.
188 */
189
190 __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
191 __raw_writel(clkdiv, S3C2410_CLKDIVN);
192
193 ndelay(20);
194 __raw_writel(camdiv, S3C2440_CAMDIVN);
195
196 clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
197}
198
199static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
200 int *divs,
201 struct cpufreq_frequency_table *table,
202 size_t table_size)
203{
204 unsigned long freq;
205 int index = 0;
206 int div;
207
208 for (div = *divs; div > 0; div = *divs++) {
209 freq = fclk / div;
210
211 if (freq > max_hclk && div != 1)
212 continue;
213
214 freq /= 1000; /* table is in kHz */
215 index = s3c_cpufreq_addfreq(table, index, table_size, freq);
216 if (index < 0)
217 break;
218 }
219
220 return index;
221}
222
223static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
224
225static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
226 struct cpufreq_frequency_table *table,
227 size_t table_size)
228{
229 int ret;
230
231 WARN_ON(cfg->info == NULL);
232 WARN_ON(cfg->board == NULL);
233
234 ret = run_freq_for(cfg->info->max.hclk,
235 cfg->info->max.fclk,
236 hclk_divs,
237 table, table_size);
238
239 s3c_freq_dbg("%s: returning %d\n", __func__, ret);
240
241 return ret;
242}
243
Sachin Kamat8f82b192014-01-03 14:57:36 +0530244static struct s3c_cpufreq_info s3c2440_cpufreq_info = {
Ben Dooks342e20f2009-07-30 23:23:29 +0100245 .max = {
246 .fclk = 400000000,
247 .hclk = 133333333,
248 .pclk = 66666666,
249 },
250
251 .locktime_m = 300,
252 .locktime_u = 300,
253 .locktime_bits = 16,
254
255 .name = "s3c244x",
256 .calc_iotiming = s3c2410_iotiming_calc,
257 .set_iotiming = s3c2410_iotiming_set,
258 .get_iotiming = s3c2410_iotiming_get,
259 .set_fvco = s3c2410_set_fvco,
260
261 .set_refresh = s3c2410_cpufreq_setrefresh,
262 .set_divs = s3c2440_cpufreq_setdivs,
263 .calc_divs = s3c2440_cpufreq_calcdivs,
264 .calc_freqtable = s3c2440_cpufreq_calctable,
265
Ben Dookse6d197a2009-07-30 23:23:42 +0100266 .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
Ben Dooks342e20f2009-07-30 23:23:29 +0100267};
268
Heiko Stuebner04511a62012-01-27 15:35:25 +0900269static int s3c2440_cpufreq_add(struct device *dev,
270 struct subsys_interface *sif)
Ben Dooks342e20f2009-07-30 23:23:29 +0100271{
272 xtal = s3c_cpufreq_clk_get(NULL, "xtal");
273 hclk = s3c_cpufreq_clk_get(NULL, "hclk");
274 fclk = s3c_cpufreq_clk_get(NULL, "fclk");
275 armclk = s3c_cpufreq_clk_get(NULL, "armclk");
276
277 if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
Joe Perchesb49c22a2016-04-05 13:28:24 -0700278 pr_err("%s: failed to get clocks\n", __func__);
Ben Dooks342e20f2009-07-30 23:23:29 +0100279 return -ENOENT;
280 }
281
282 return s3c_cpufreq_register(&s3c2440_cpufreq_info);
283}
284
Kay Sievers4a858cf2011-12-21 16:01:38 -0800285static struct subsys_interface s3c2440_cpufreq_interface = {
286 .name = "s3c2440_cpufreq",
287 .subsys = &s3c2440_subsys,
288 .add_dev = s3c2440_cpufreq_add,
Ben Dooks342e20f2009-07-30 23:23:29 +0100289};
290
291static int s3c2440_cpufreq_init(void)
292{
Kay Sievers4a858cf2011-12-21 16:01:38 -0800293 return subsys_interface_register(&s3c2440_cpufreq_interface);
Ben Dooks342e20f2009-07-30 23:23:29 +0100294}
295
296/* arch_initcall adds the clocks we need, so use subsys_initcall. */
297subsys_initcall(s3c2440_cpufreq_init);
298
Kay Sievers4a858cf2011-12-21 16:01:38 -0800299static struct subsys_interface s3c2442_cpufreq_interface = {
300 .name = "s3c2442_cpufreq",
301 .subsys = &s3c2442_subsys,
302 .add_dev = s3c2440_cpufreq_add,
Ben Dooks342e20f2009-07-30 23:23:29 +0100303};
304
305static int s3c2442_cpufreq_init(void)
306{
Kay Sievers4a858cf2011-12-21 16:01:38 -0800307 return subsys_interface_register(&s3c2442_cpufreq_interface);
Ben Dooks342e20f2009-07-30 23:23:29 +0100308}
Ben Dooks342e20f2009-07-30 23:23:29 +0100309subsys_initcall(s3c2442_cpufreq_init);