Thomas Bogendoerfer | 787dba3 | 2008-07-12 12:12:20 +0200 | [diff] [blame] | 1 | #ifndef __HAL2_H |
| 2 | #define __HAL2_H |
| 3 | |
| 4 | /* |
| 5 | * Driver for HAL2 sound processors |
| 6 | * Copyright (c) 1999 Ulf Carlsson <ulfc@bun.falkenberg.se> |
| 7 | * Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org> |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License version 2 as |
| 11 | * published by the Free Software Foundation. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 21 | * |
| 22 | */ |
| 23 | |
| 24 | #include <linux/types.h> |
| 25 | |
| 26 | /* Indirect status register */ |
| 27 | |
| 28 | #define H2_ISR_TSTATUS 0x01 /* RO: transaction status 1=busy */ |
| 29 | #define H2_ISR_USTATUS 0x02 /* RO: utime status bit 1=armed */ |
| 30 | #define H2_ISR_QUAD_MODE 0x04 /* codec mode 0=indigo 1=quad */ |
| 31 | #define H2_ISR_GLOBAL_RESET_N 0x08 /* chip global reset 0=reset */ |
| 32 | #define H2_ISR_CODEC_RESET_N 0x10 /* codec/synth reset 0=reset */ |
| 33 | |
| 34 | /* Revision register */ |
| 35 | |
| 36 | #define H2_REV_AUDIO_PRESENT 0x8000 /* RO: audio present 0=present */ |
| 37 | #define H2_REV_BOARD_M 0x7000 /* RO: bits 14:12, board revision */ |
| 38 | #define H2_REV_MAJOR_CHIP_M 0x00F0 /* RO: bits 7:4, major chip revision */ |
| 39 | #define H2_REV_MINOR_CHIP_M 0x000F /* RO: bits 3:0, minor chip revision */ |
| 40 | |
| 41 | /* Indirect address register */ |
| 42 | |
| 43 | /* |
| 44 | * Address of indirect internal register to be accessed. A write to this |
| 45 | * register initiates read or write access to the indirect registers in the |
| 46 | * HAL2. Note that there af four indirect data registers for write access to |
| 47 | * registers larger than 16 byte. |
| 48 | */ |
| 49 | |
| 50 | #define H2_IAR_TYPE_M 0xF000 /* bits 15:12, type of functional */ |
| 51 | /* block the register resides in */ |
| 52 | /* 1=DMA Port */ |
| 53 | /* 9=Global DMA Control */ |
| 54 | /* 2=Bresenham */ |
| 55 | /* 3=Unix Timer */ |
| 56 | #define H2_IAR_NUM_M 0x0F00 /* bits 11:8 instance of the */ |
| 57 | /* blockin which the indirect */ |
| 58 | /* register resides */ |
| 59 | /* If IAR_TYPE_M=DMA Port: */ |
| 60 | /* 1=Synth In */ |
| 61 | /* 2=AES In */ |
| 62 | /* 3=AES Out */ |
| 63 | /* 4=DAC Out */ |
| 64 | /* 5=ADC Out */ |
| 65 | /* 6=Synth Control */ |
| 66 | /* If IAR_TYPE_M=Global DMA Control: */ |
| 67 | /* 1=Control */ |
| 68 | /* If IAR_TYPE_M=Bresenham: */ |
| 69 | /* 1=Bresenham Clock Gen 1 */ |
| 70 | /* 2=Bresenham Clock Gen 2 */ |
| 71 | /* 3=Bresenham Clock Gen 3 */ |
| 72 | /* If IAR_TYPE_M=Unix Timer: */ |
| 73 | /* 1=Unix Timer */ |
| 74 | #define H2_IAR_ACCESS_SELECT 0x0080 /* 1=read 0=write */ |
| 75 | #define H2_IAR_PARAM 0x000C /* Parameter Select */ |
| 76 | #define H2_IAR_RB_INDEX_M 0x0003 /* Read Back Index */ |
| 77 | /* 00:word0 */ |
| 78 | /* 01:word1 */ |
| 79 | /* 10:word2 */ |
| 80 | /* 11:word3 */ |
| 81 | /* |
| 82 | * HAL2 internal addressing |
| 83 | * |
| 84 | * The HAL2 has "indirect registers" (idr) which are accessed by writing to the |
| 85 | * Indirect Data registers. Write the address to the Indirect Address register |
| 86 | * to transfer the data. |
| 87 | * |
| 88 | * We define the H2IR_* to the read address and H2IW_* to the write address and |
| 89 | * H2I_* to be fields in whatever register is referred to. |
| 90 | * |
| 91 | * When we write to indirect registers which are larger than one word (16 bit) |
| 92 | * we have to fill more than one indirect register before writing. When we read |
| 93 | * back however we have to read several times, each time with different Read |
| 94 | * Back Indexes (there are defs for doing this easily). |
| 95 | */ |
| 96 | |
| 97 | /* |
| 98 | * Relay Control |
| 99 | */ |
| 100 | #define H2I_RELAY_C 0x9100 |
| 101 | #define H2I_RELAY_C_STATE 0x01 /* state of RELAY pin signal */ |
| 102 | |
| 103 | /* DMA port enable */ |
| 104 | |
| 105 | #define H2I_DMA_PORT_EN 0x9104 |
| 106 | #define H2I_DMA_PORT_EN_SY_IN 0x01 /* Synth_in DMA port */ |
| 107 | #define H2I_DMA_PORT_EN_AESRX 0x02 /* AES receiver DMA port */ |
| 108 | #define H2I_DMA_PORT_EN_AESTX 0x04 /* AES transmitter DMA port */ |
| 109 | #define H2I_DMA_PORT_EN_CODECTX 0x08 /* CODEC transmit DMA port */ |
| 110 | #define H2I_DMA_PORT_EN_CODECR 0x10 /* CODEC receive DMA port */ |
| 111 | |
| 112 | #define H2I_DMA_END 0x9108 /* global dma endian select */ |
| 113 | #define H2I_DMA_END_SY_IN 0x01 /* Synth_in DMA port */ |
| 114 | #define H2I_DMA_END_AESRX 0x02 /* AES receiver DMA port */ |
| 115 | #define H2I_DMA_END_AESTX 0x04 /* AES transmitter DMA port */ |
| 116 | #define H2I_DMA_END_CODECTX 0x08 /* CODEC transmit DMA port */ |
| 117 | #define H2I_DMA_END_CODECR 0x10 /* CODEC receive DMA port */ |
| 118 | /* 0=b_end 1=l_end */ |
| 119 | |
| 120 | #define H2I_DMA_DRV 0x910C /* global PBUS DMA enable */ |
| 121 | |
| 122 | #define H2I_SYNTH_C 0x1104 /* Synth DMA control */ |
| 123 | |
| 124 | #define H2I_AESRX_C 0x1204 /* AES RX dma control */ |
| 125 | |
| 126 | #define H2I_C_TS_EN 0x20 /* Timestamp enable */ |
| 127 | #define H2I_C_TS_FRMT 0x40 /* Timestamp format */ |
| 128 | #define H2I_C_NAUDIO 0x80 /* Sign extend */ |
| 129 | |
| 130 | /* AESRX CTL, 16 bit */ |
| 131 | |
| 132 | #define H2I_AESTX_C 0x1304 /* AES TX DMA control */ |
| 133 | #define H2I_AESTX_C_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */ |
| 134 | #define H2I_AESTX_C_CLKID_M 0x18 |
| 135 | #define H2I_AESTX_C_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */ |
| 136 | #define H2I_AESTX_C_DATAT_M 0x300 |
| 137 | |
| 138 | /* CODEC registers */ |
| 139 | |
| 140 | #define H2I_DAC_C1 0x1404 /* DAC DMA control, 16 bit */ |
| 141 | #define H2I_DAC_C2 0x1408 /* DAC DMA control, 32 bit */ |
| 142 | #define H2I_ADC_C1 0x1504 /* ADC DMA control, 16 bit */ |
| 143 | #define H2I_ADC_C2 0x1508 /* ADC DMA control, 32 bit */ |
| 144 | |
| 145 | /* Bits in CTL1 register */ |
| 146 | |
| 147 | #define H2I_C1_DMA_SHIFT 0 /* DMA channel */ |
| 148 | #define H2I_C1_DMA_M 0x7 |
| 149 | #define H2I_C1_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */ |
| 150 | #define H2I_C1_CLKID_M 0x18 |
| 151 | #define H2I_C1_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */ |
| 152 | #define H2I_C1_DATAT_M 0x300 |
| 153 | |
| 154 | /* Bits in CTL2 register */ |
| 155 | |
| 156 | #define H2I_C2_R_GAIN_SHIFT 0 /* right a/d input gain */ |
| 157 | #define H2I_C2_R_GAIN_M 0xf |
| 158 | #define H2I_C2_L_GAIN_SHIFT 4 /* left a/d input gain */ |
| 159 | #define H2I_C2_L_GAIN_M 0xf0 |
| 160 | #define H2I_C2_R_SEL 0x100 /* right input select */ |
| 161 | #define H2I_C2_L_SEL 0x200 /* left input select */ |
| 162 | #define H2I_C2_MUTE 0x400 /* mute */ |
| 163 | #define H2I_C2_DO1 0x00010000 /* digital output port bit 0 */ |
| 164 | #define H2I_C2_DO2 0x00020000 /* digital output port bit 1 */ |
| 165 | #define H2I_C2_R_ATT_SHIFT 18 /* right d/a output - */ |
| 166 | #define H2I_C2_R_ATT_M 0x007c0000 /* attenuation */ |
| 167 | #define H2I_C2_L_ATT_SHIFT 23 /* left d/a output - */ |
| 168 | #define H2I_C2_L_ATT_M 0x0f800000 /* attenuation */ |
| 169 | |
| 170 | #define H2I_SYNTH_MAP_C 0x1104 /* synth dma handshake ctrl */ |
| 171 | |
| 172 | /* Clock generator CTL 1, 16 bit */ |
| 173 | |
| 174 | #define H2I_BRES1_C1 0x2104 |
| 175 | #define H2I_BRES2_C1 0x2204 |
| 176 | #define H2I_BRES3_C1 0x2304 |
| 177 | |
| 178 | #define H2I_BRES_C1_SHIFT 0 /* 0=48.0 1=44.1 2=aes_rx */ |
| 179 | #define H2I_BRES_C1_M 0x03 |
| 180 | |
| 181 | /* Clock generator CTL 2, 32 bit */ |
| 182 | |
| 183 | #define H2I_BRES1_C2 0x2108 |
| 184 | #define H2I_BRES2_C2 0x2208 |
| 185 | #define H2I_BRES3_C2 0x2308 |
| 186 | |
| 187 | #define H2I_BRES_C2_INC_SHIFT 0 /* increment value */ |
| 188 | #define H2I_BRES_C2_INC_M 0xffff |
| 189 | #define H2I_BRES_C2_MOD_SHIFT 16 /* modcontrol value */ |
| 190 | #define H2I_BRES_C2_MOD_M 0xffff0000 /* modctrl=0xffff&(modinc-1) */ |
| 191 | |
| 192 | /* Unix timer, 64 bit */ |
| 193 | |
| 194 | #define H2I_UTIME 0x3104 |
| 195 | #define H2I_UTIME_0_LD 0xffff /* microseconds, LSB's */ |
| 196 | #define H2I_UTIME_1_LD0 0x0f /* microseconds, MSB's */ |
| 197 | #define H2I_UTIME_1_LD1 0xf0 /* tenths of microseconds */ |
| 198 | #define H2I_UTIME_2_LD 0xffff /* seconds, LSB's */ |
| 199 | #define H2I_UTIME_3_LD 0xffff /* seconds, MSB's */ |
| 200 | |
| 201 | struct hal2_ctl_regs { |
| 202 | u32 _unused0[4]; |
| 203 | u32 isr; /* 0x10 Status Register */ |
| 204 | u32 _unused1[3]; |
| 205 | u32 rev; /* 0x20 Revision Register */ |
| 206 | u32 _unused2[3]; |
| 207 | u32 iar; /* 0x30 Indirect Address Register */ |
| 208 | u32 _unused3[3]; |
| 209 | u32 idr0; /* 0x40 Indirect Data Register 0 */ |
| 210 | u32 _unused4[3]; |
| 211 | u32 idr1; /* 0x50 Indirect Data Register 1 */ |
| 212 | u32 _unused5[3]; |
| 213 | u32 idr2; /* 0x60 Indirect Data Register 2 */ |
| 214 | u32 _unused6[3]; |
| 215 | u32 idr3; /* 0x70 Indirect Data Register 3 */ |
| 216 | }; |
| 217 | |
| 218 | struct hal2_aes_regs { |
| 219 | u32 rx_stat[2]; /* Status registers */ |
| 220 | u32 rx_cr[2]; /* Control registers */ |
| 221 | u32 rx_ud[4]; /* User data window */ |
| 222 | u32 rx_st[24]; /* Channel status data */ |
| 223 | |
| 224 | u32 tx_stat[1]; /* Status register */ |
| 225 | u32 tx_cr[3]; /* Control registers */ |
| 226 | u32 tx_ud[4]; /* User data window */ |
| 227 | u32 tx_st[24]; /* Channel status data */ |
| 228 | }; |
| 229 | |
| 230 | struct hal2_vol_regs { |
| 231 | u32 right; /* Right volume */ |
| 232 | u32 left; /* Left volume */ |
| 233 | }; |
| 234 | |
| 235 | struct hal2_syn_regs { |
| 236 | u32 _unused0[2]; |
| 237 | u32 page; /* DOC Page register */ |
| 238 | u32 regsel; /* DOC Register selection */ |
| 239 | u32 dlow; /* DOC Data low */ |
| 240 | u32 dhigh; /* DOC Data high */ |
| 241 | u32 irq; /* IRQ Status */ |
| 242 | u32 dram; /* DRAM Access */ |
| 243 | }; |
| 244 | |
| 245 | #endif /* __HAL2_H */ |