| Stefan Roese | 9652e8b | 2012-03-16 14:03:23 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2012 Stefan Roese <sr@denx.de> |
| 3 | * |
| 4 | * The code contained herein is licensed under the GNU General Public |
| 5 | * License. You may obtain a copy of the GNU General Public License |
| 6 | * Version 2 or later at the following locations: |
| 7 | * |
| 8 | * http://www.opensource.org/licenses/gpl-license.html |
| 9 | * http://www.gnu.org/copyleft/gpl.html |
| 10 | */ |
| 11 | |
| 12 | /include/ "skeleton.dtsi" |
| 13 | |
| 14 | / { |
| 15 | compatible = "st,spear600"; |
| 16 | |
| 17 | cpus { |
| 18 | cpu@0 { |
| 19 | compatible = "arm,arm926ejs"; |
| 20 | }; |
| 21 | }; |
| 22 | |
| 23 | memory { |
| 24 | device_type = "memory"; |
| 25 | reg = <0 0x40000000>; |
| 26 | }; |
| 27 | |
| 28 | ahb { |
| 29 | #address-cells = <1>; |
| 30 | #size-cells = <1>; |
| 31 | compatible = "simple-bus"; |
| 32 | ranges = <0xd0000000 0xd0000000 0x30000000>; |
| 33 | |
| 34 | vic0: interrupt-controller@f1100000 { |
| 35 | compatible = "arm,pl190-vic"; |
| 36 | interrupt-controller; |
| 37 | reg = <0xf1100000 0x1000>; |
| 38 | #interrupt-cells = <1>; |
| 39 | }; |
| 40 | |
| 41 | vic1: interrupt-controller@f1000000 { |
| 42 | compatible = "arm,pl190-vic"; |
| 43 | interrupt-controller; |
| 44 | reg = <0xf1000000 0x1000>; |
| 45 | #interrupt-cells = <1>; |
| 46 | }; |
| 47 | |
| 48 | gmac: ethernet@e0800000 { |
| 49 | compatible = "st,spear600-gmac"; |
| 50 | reg = <0xe0800000 0x8000>; |
| 51 | interrupt-parent = <&vic1>; |
| 52 | interrupts = <24 23>; |
| 53 | interrupt-names = "macirq", "eth_wake_irq"; |
| 54 | status = "disabled"; |
| 55 | }; |
| 56 | |
| 57 | fsmc: flash@d1800000 { |
| 58 | compatible = "st,spear600-fsmc-nand"; |
| 59 | #address-cells = <1>; |
| 60 | #size-cells = <1>; |
| 61 | reg = <0xd1800000 0x1000 /* FSMC Register */ |
| 62 | 0xd2000000 0x4000>; /* NAND Base */ |
| 63 | reg-names = "fsmc_regs", "nand_data"; |
| 64 | st,ale-off = <0x20000>; |
| 65 | st,cle-off = <0x10000>; |
| 66 | status = "disabled"; |
| 67 | }; |
| 68 | |
| 69 | smi: flash@fc000000 { |
| 70 | compatible = "st,spear600-smi"; |
| 71 | #address-cells = <1>; |
| 72 | #size-cells = <1>; |
| 73 | reg = <0xfc000000 0x1000>; |
| 74 | interrupt-parent = <&vic1>; |
| 75 | interrupts = <12>; |
| 76 | status = "disabled"; |
| 77 | }; |
| 78 | |
| 79 | ehci@e1800000 { |
| 80 | compatible = "st,spear600-ehci", "usb-ehci"; |
| 81 | reg = <0xe1800000 0x1000>; |
| 82 | interrupt-parent = <&vic1>; |
| 83 | interrupts = <27>; |
| 84 | status = "disabled"; |
| 85 | }; |
| 86 | |
| 87 | ehci@e2000000 { |
| 88 | compatible = "st,spear600-ehci", "usb-ehci"; |
| 89 | reg = <0xe2000000 0x1000>; |
| 90 | interrupt-parent = <&vic1>; |
| 91 | interrupts = <29>; |
| 92 | status = "disabled"; |
| 93 | }; |
| 94 | |
| 95 | ohci@e1900000 { |
| 96 | compatible = "st,spear600-ohci", "usb-ohci"; |
| 97 | reg = <0xe1900000 0x1000>; |
| 98 | interrupt-parent = <&vic1>; |
| 99 | interrupts = <26>; |
| 100 | status = "disabled"; |
| 101 | }; |
| 102 | |
| 103 | ohci@e2100000 { |
| 104 | compatible = "st,spear600-ohci", "usb-ohci"; |
| 105 | reg = <0xe2100000 0x1000>; |
| 106 | interrupt-parent = <&vic1>; |
| 107 | interrupts = <28>; |
| 108 | status = "disabled"; |
| 109 | }; |
| 110 | |
| 111 | apb { |
| 112 | #address-cells = <1>; |
| 113 | #size-cells = <1>; |
| 114 | compatible = "simple-bus"; |
| 115 | ranges = <0xd0000000 0xd0000000 0x30000000>; |
| 116 | |
| 117 | serial@d0000000 { |
| 118 | compatible = "arm,pl011", "arm,primecell"; |
| 119 | reg = <0xd0000000 0x1000>; |
| 120 | interrupt-parent = <&vic0>; |
| 121 | interrupts = <24>; |
| 122 | status = "disabled"; |
| 123 | }; |
| 124 | |
| 125 | serial@d0080000 { |
| 126 | compatible = "arm,pl011", "arm,primecell"; |
| 127 | reg = <0xd0080000 0x1000>; |
| 128 | interrupt-parent = <&vic0>; |
| 129 | interrupts = <25>; |
| 130 | status = "disabled"; |
| 131 | }; |
| 132 | |
| 133 | /* local/cpu GPIO */ |
| 134 | gpio0: gpio@f0100000 { |
| 135 | #gpio-cells = <2>; |
| 136 | compatible = "arm,pl061", "arm,primecell"; |
| 137 | gpio-controller; |
| 138 | reg = <0xf0100000 0x1000>; |
| 139 | interrupt-parent = <&vic0>; |
| 140 | interrupts = <18>; |
| 141 | }; |
| 142 | |
| 143 | /* basic GPIO */ |
| 144 | gpio1: gpio@fc980000 { |
| 145 | #gpio-cells = <2>; |
| 146 | compatible = "arm,pl061", "arm,primecell"; |
| 147 | gpio-controller; |
| 148 | reg = <0xfc980000 0x1000>; |
| 149 | interrupt-parent = <&vic1>; |
| 150 | interrupts = <19>; |
| 151 | }; |
| 152 | |
| 153 | /* appl GPIO */ |
| 154 | gpio2: gpio@d8100000 { |
| 155 | #gpio-cells = <2>; |
| 156 | compatible = "arm,pl061", "arm,primecell"; |
| 157 | gpio-controller; |
| 158 | reg = <0xd8100000 0x1000>; |
| 159 | interrupt-parent = <&vic1>; |
| 160 | interrupts = <4>; |
| 161 | }; |
| 162 | |
| 163 | i2c@d0200000 { |
| 164 | #address-cells = <1>; |
| 165 | #size-cells = <0>; |
| 166 | compatible = "snps,designware-i2c"; |
| 167 | reg = <0xd0200000 0x1000>; |
| 168 | interrupt-parent = <&vic0>; |
| 169 | interrupts = <28>; |
| 170 | status = "disabled"; |
| 171 | }; |
| 172 | }; |
| 173 | }; |
| 174 | }; |