Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 399d3c3b6c6448ff4baa4423ec0926316182ef2b / . / arch / arm64 / boot / dts / qcom / msm8953-camera-sensor-mtp.dtsi
blob: 6e961b117953a8d2705b396a9b42f67e4bc00e2b [file] [log] [blame]
Vijay kumar Tumati299fec02018-02-24 15:30:31 +0530[diff] [blame]1/*
2 * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 and
6 * only version 2 as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 */
13
14&cci {
15 actuator0: qcom,actuator@0 {
16 cell-index = <0>;
17 reg = <0x0>;
18 compatible = "qcom,actuator";
19 qcom,cci-master = <0>;
20 cam_vaf-supply = <&pm8953_l17>;
21 qcom,cam-vreg-name = "cam_vaf";
22 qcom,cam-vreg-min-voltage = <2850000>;
23 qcom,cam-vreg-max-voltage = <2850000>;
24 qcom,cam-vreg-op-mode = <80000>;
25 };
26
27 actuator1: qcom,actuator@1 {
28 cell-index = <1>;
29 reg = <0x1>;
30 compatible = "qcom,actuator";
31 qcom,cci-master = <1>;
32 cam_vaf-supply = <&pm8953_l17>;
33 qcom,cam-vreg-name = "cam_vaf";
34 qcom,cam-vreg-min-voltage = <2850000>;
35 qcom,cam-vreg-max-voltage = <2850000>;
36 qcom,cam-vreg-op-mode = <80000>;
37 };
38
39 eeprom0: qcom,eeprom@0 {
40 cell-index = <0>;
41 compatible = "qcom,eeprom";
42 qcom,cci-master = <0>;
43 reg = <0x0>;
44 cam_vio-supply = <&pm8953_l6>;
45 cam_vdig-supply = <&pm8953_l2>;
46 cam_vaf-supply = <&pm8953_l17>;
47 qcom,cam-vreg-name = "cam_vio", "cam_vdig", "cam_vaf";
Vijay kumar Tumatif3619c42018-04-13 17:15:49 +0530[diff] [blame]48 qcom,cam-vreg-min-voltage = <0 1200000 2850000>;
49 qcom,cam-vreg-max-voltage = <0 1200000 2850000>;
Vijay kumar Tumati299fec02018-02-24 15:30:31 +0530[diff] [blame]50 qcom,cam-vreg-op-mode = <0 105000 100000>;
51 pinctrl-names = "cam_default", "cam_suspend";
52 pinctrl-0 = <&cam_sensor_mclk0_default
53 &cam_sensor_rear_default
54 &cam_sensor_rear_vana>;
55 pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep
56 &cam_sensor_rear_vana_sleep>;
57 gpios = <&tlmm 26 0>,
58 <&tlmm 40 0>,
59 <&tlmm 39 0>,
60 <&tlmm 134 0>;
61 qcom,gpio-reset = <1>;
62 qcom,gpio-standby = <2>;
63 qcom,gpio-vana = <3>;
64 qcom,gpio-req-tbl-num = <0 1 2 3>;
65 qcom,gpio-req-tbl-flags = <1 0 0 0>;
66 qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
67 "CAM_RESET0",
68 "CAM_STANDBY0",
69 "CAM_VANA";
70 status = "ok";
71 clocks = <&clock_gcc clk_mclk0_clk_src>,
72 <&clock_gcc clk_gcc_camss_mclk0_clk>;
73 clock-names = "cam_src_clk", "cam_clk";
74 qcom,clock-rates = <19200000 0>;
75 };
76
77 eeprom1: qcom,eeprom@1 {
78 cell-index = <1>;
79 reg = <0x1>;
80 qcom,eeprom-name = "sunny_8865";
81 compatible = "qcom,eeprom";
82 qcom,slave-addr = <0x6c>;
83 qcom,cci-master = <0>;
84 qcom,num-blocks = <8>;
85
86 qcom,page0 = <1 0x0100 2 0x01 1 1>;
87 qcom,poll0 = <0 0x0 2 0x0 1 0>;
88 qcom,mem0 = <0 0x0 2 0x0 1 0>;
89
90 qcom,page1 = <1 0x5002 2 0x00 1 0>;
91 qcom,poll1 = <0 0x0 2 0x0 1 0>;
92 qcom,mem1 = <0 0x0 2 0x0 1 0>;
93
94 qcom,page2 = <1 0x3d84 2 0xc0 1 0>;
95 qcom,poll2 = <0 0x0 2 0x0 1 0>;
96 qcom,mem2 = <0 0x0 2 0x0 1 0>;
97
98 qcom,page3 = <1 0x3d88 2 0x70 1 0>;
99 qcom,poll3 = <0 0x0 2 0x0 1 0>;
100 qcom,mem3 = <0 0x0 2 0x0 1 0>;
101
102 qcom,page4 = <1 0x3d89 2 0x10 1 0>;
103 qcom,poll4 = <0 0x0 2 0x0 1 0>;
104 qcom,mem4 = <0 0x0 2 0x0 1 0>;
105
106 qcom,page5 = <1 0x3d8a 2 0x70 1 0>;
107 qcom,poll5 = <0 0x0 2 0x0 1 0>;
108 qcom,mem5 = <0 0x0 2 0x0 1 0>;
109
110 qcom,page6 = <1 0x3d8b 2 0xf4 1 0>;
111 qcom,poll6 = <0 0x0 2 0x0 1 0>;
112 qcom,mem6 = <0 0x0 2 0x0 1 0>;
113
114 qcom,page7 = <1 0x3d81 2 0x01 1 10>;
115 qcom,poll7 = <0 0x0 2 0x0 1 1>;
116 qcom,mem7 = <1536 0x7010 2 0 1 0>;
117
118 cam_vdig-supply = <&pm8953_l23>;
119 cam_vana-supply = <&pm8953_l22>;
120 cam_vio-supply = <&pm8953_l6>;
121 cam_vaf-supply = <&pm8953_l17>;
122 qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
123 "cam_vaf";
124 qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
125 qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
126 qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
127 qcom,gpio-no-mux = <0>;
128 pinctrl-names = "cam_default", "cam_suspend";
129 pinctrl-0 = <&cam_sensor_mclk1_default
130 &cam_sensor_front1_default>;
131 pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front1_sleep>;
132 gpios = <&tlmm 27 0>,
133 <&tlmm 129 0>,
134 <&tlmm 130 0>;
135 qcom,gpio-reset = <1>;
136 qcom,gpio-standby = <2>;
137 qcom,gpio-req-tbl-num = <0 1 2>;
138 qcom,gpio-req-tbl-flags = <1 0 0>;
139 qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
140 "CAM_RESET2",
141 "CAM_STANDBY2";
142 qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg",
143 "sensor_vreg",
144 "sensor_gpio", "sensor_gpio" , "sensor_clk";
145 qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio",
146 "sensor_gpio_reset", "sensor_gpio_standby",
147 "sensor_cam_mclk";
148 qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;
149 qcom,cam-power-seq-delay = <1 1 1 30 30 5>;
150 status = "ok";
151 clocks = <&clock_gcc clk_mclk1_clk_src>,
152 <&clock_gcc clk_gcc_camss_mclk1_clk>;
153 clock-names = "cam_src_clk", "cam_clk";
154 qcom,clock-rates = <19200000 0>;
155 };
156
157 eeprom2: qcom,eeprom@2 {
158 cell-index = <2>;
159 compatible = "qcom,eeprom";
160 qcom,cci-master = <1>;
161 reg = <0x2>;
162 cam_vdig-supply = <&pm8953_l23>;
163 cam_vana-supply = <&pm8953_l22>;
164 cam_vio-supply = <&pm8953_l6>;
165 cam_vaf-supply = <&pm8953_l17>;
166 qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
167 "cam_vaf";
168 qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
169 qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
170 qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
171 pinctrl-names = "cam_default", "cam_suspend";
172 pinctrl-0 = <&cam_sensor_mclk2_default
173 &cam_sensor_front_default>;
174 pinctrl-1 = <&cam_sensor_mclk2_sleep
175 &cam_sensor_front_sleep>;
176 gpios = <&tlmm 28 0>,
177 <&tlmm 131 0>,
178 <&tlmm 132 0>;
179 qcom,gpio-reset = <1>;
180 qcom,gpio-standby = <2>;
181 qcom,gpio-req-tbl-num = <0 1 2>;
182 qcom,gpio-req-tbl-flags = <1 0 0>;
183 qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
184 "CAM_RESET1",
185 "CAM_STANDBY1";
186 status = "ok";
187 clocks = <&clock_gcc clk_mclk2_clk_src>,
188 <&clock_gcc clk_gcc_camss_mclk2_clk>;
189 clock-names = "cam_src_clk", "cam_clk";
190 qcom,clock-rates = <19200000 0>;
191 };
192
Vijay kumar Tumati408b0962018-03-16 17:28:31 +0530[diff] [blame]193 camera0: qcom,camera@0 {
Vijay kumar Tumati299fec02018-02-24 15:30:31 +0530[diff] [blame]194 cell-index = <0>;
195 compatible = "qcom,camera";
196 reg = <0x0>;
197 qcom,csiphy-sd-index = <0>;
198 qcom,csid-sd-index = <0>;
199 qcom,mount-angle = <270>;
Vijay kumar Tumati26fe6282018-02-21 18:40:21 +0530[diff] [blame]200 qcom,led-flash-src = <&led_flash0>;
Vijay kumar Tumati299fec02018-02-24 15:30:31 +0530[diff] [blame]201 qcom,eeprom-src = <&eeprom0>;
202 qcom,actuator-src = <&actuator0>;
203 cam_vio-supply = <&pm8953_l6>;
204 cam_vdig-supply = <&pm8953_l2>;
205 cam_vaf-supply = <&pm8953_l17>;
206 cam_vana-supply = <&pm8953_l22>;
Samyukta Mogilyceee3f32018-03-26 14:11:33 +0530[diff] [blame]207 cam_v_custom1-supply = <&pm8953_l23>;
Vijay kumar Tumati299fec02018-02-24 15:30:31 +0530[diff] [blame]208 qcom,cam-vreg-name = "cam_vio", "cam_vdig", "cam_vaf",
Samyukta Mogilyceee3f32018-03-26 14:11:33 +0530[diff] [blame]209 "cam_vana", "cam_v_custom1";
Vijay kumar Tumatif3619c42018-04-13 17:15:49 +0530[diff] [blame]210 qcom,cam-vreg-min-voltage = <0 1200000 2850000 2800000 1220000>;
211 qcom,cam-vreg-max-voltage = <0 1200000 2850000 2800000 1220000>;
Samyukta Mogilyceee3f32018-03-26 14:11:33 +0530[diff] [blame]212 qcom,cam-vreg-op-mode = <0 105000 100000 80000 105000>;
Vijay kumar Tumati299fec02018-02-24 15:30:31 +0530[diff] [blame]213 pinctrl-names = "cam_default", "cam_suspend";
214 pinctrl-0 = <&cam_sensor_mclk0_default
215 &cam_sensor_rear_default
216 &cam_sensor_rear_vana>;
217 pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep
218 &cam_sensor_rear_vana_sleep>;
219 gpios = <&tlmm 26 0>,
220 <&tlmm 40 0>,
221 <&tlmm 39 0>,
222 <&tlmm 134 0>;
223 qcom,gpio-reset = <1>;
224 qcom,gpio-standby = <2>;
225 qcom,gpio-vana = <3>;
226 qcom,gpio-req-tbl-num = <0 1 2 3>;
227 qcom,gpio-req-tbl-flags = <1 0 0 0>;
228 qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
229 "CAM_RESET0",
230 "CAM_STANDBY0",
231 "CAM_VANA";
232 qcom,sensor-position = <0>;
233 qcom,sensor-mode = <0>;
234 qcom,cci-master = <0>;
235 status = "ok";
236 clocks = <&clock_gcc clk_mclk0_clk_src>,
237 <&clock_gcc clk_gcc_camss_mclk0_clk>;
238 clock-names = "cam_src_clk", "cam_clk";
239 qcom,clock-rates = <24000000 0>;
240 };
241
242 qcom,camera@1 {
243 cell-index = <1>;
244 compatible = "qcom,camera";
245 reg = <0x1>;
246 qcom,csiphy-sd-index = <1>;
247 qcom,csid-sd-index = <1>;
248 qcom,mount-angle = <90>;
249 qcom,eeprom-src = <&eeprom2>;
250 qcom,actuator-src = <&actuator1>;
251 cam_vdig-supply = <&pm8953_l23>;
252 cam_vana-supply = <&pm8953_l22>;
253 cam_vio-supply = <&pm8953_l6>;
254 cam_vaf-supply = <&pm8953_l17>;
255 qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
256 "cam_vaf";
257 qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
258 qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
259 qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
260 pinctrl-names = "cam_default", "cam_suspend";
261 pinctrl-0 = <&cam_sensor_mclk2_default
262 &cam_sensor_front_default>;
263 pinctrl-1 = <&cam_sensor_mclk2_sleep
264 &cam_sensor_front_sleep>;
265 gpios = <&tlmm 28 0>,
266 <&tlmm 131 0>,
267 <&tlmm 132 0>;
268 qcom,gpio-reset = <1>;
269 qcom,gpio-standby = <2>;
270 qcom,gpio-req-tbl-num = <0 1 2>;
271 qcom,gpio-req-tbl-flags = <1 0 0>;
272 qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
273 "CAM_RESET1",
274 "CAM_STANDBY1";
275 qcom,sensor-position = <0x100>;
276 qcom,sensor-mode = <1>;
277 qcom,cci-master = <1>;
278 status = "ok";
279 clocks = <&clock_gcc clk_mclk2_clk_src>,
280 <&clock_gcc clk_gcc_camss_mclk2_clk>;
281 clock-names = "cam_src_clk", "cam_clk";
282 qcom,clock-rates = <24000000 0>;
283 };
284
285 qcom,camera@2 {
286 cell-index = <2>;
287 compatible = "qcom,camera";
288 reg = <0x02>;
289 qcom,csiphy-sd-index = <2>;
290 qcom,csid-sd-index = <2>;
291 qcom,mount-angle = <90>;
292 qcom,eeprom-src = <&eeprom1>;
293 qcom,actuator-src = <&actuator1>;
294 cam_vdig-supply = <&pm8953_l23>;
295 cam_vio-supply = <&pm8953_l6>;
296 cam_vana-supply = <&pm8953_l22>;
297 cam_vaf-supply = <&pm8953_l17>;
298 qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
299 "cam_vaf";
Vijay kumar Tumatif3619c42018-04-13 17:15:49 +0530[diff] [blame]300 qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
301 qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
Vijay kumar Tumati299fec02018-02-24 15:30:31 +0530[diff] [blame]302 qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
303 qcom,gpio-no-mux = <0>;
304 pinctrl-names = "cam_default", "cam_suspend";
305 pinctrl-0 = <&cam_sensor_mclk1_default
306 &cam_sensor_front1_default>;
307 pinctrl-1 = <&cam_sensor_mclk1_sleep
308 &cam_sensor_front1_sleep>;
309 gpios = <&tlmm 27 0>,
310 <&tlmm 129 0>,
311 <&tlmm 130 0>;
312 qcom,gpio-reset = <1>;
313 qcom,gpio-standby = <2>;
314 qcom,gpio-req-tbl-num = <0 1 2>;
315 qcom,gpio-req-tbl-flags = <1 0 0>;
316 qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
317 "CAM_RESET2",
318 "CAM_STANDBY2";
319 qcom,sensor-position = <1>;
320 qcom,sensor-mode = <0>;
321 qcom,cci-master = <1>;
322 status = "ok";
323 clocks = <&clock_gcc clk_mclk1_clk_src>,
324 <&clock_gcc clk_gcc_camss_mclk1_clk>;
325 clock-names = "cam_src_clk", "cam_clk";
326 qcom,clock-rates = <24000000 0>;
327 };
328};