blob: 797ba17c404f74053c460c4c7e5a9724d4e8bb5b [file] [log] [blame]
Antoine Tenart13ebb682014-11-20 22:53:25 +01001/*
2 * Copyright (C) 2014 Marvell Technology Group Ltd.
3 *
4 * Antoine Tenart <antoine.tenart@free-electrons.com>
5 * Jisheng Zhang <jszhang@marvell.com>
6 *
7 * This file is licensed under the terms of the GNU General Public
8 * License version 2. This program is licensed "as is" without any
9 * warranty of any kind, whether express or implied.
10 */
11
12#include <linux/gpio.h>
13#include <linux/io.h>
14#include <linux/module.h>
15#include <linux/of_device.h>
16#include <linux/of_gpio.h>
17#include <linux/phy/phy.h>
18#include <linux/platform_device.h>
19#include <linux/reset.h>
20
21#define USB_PHY_PLL 0x04
22#define USB_PHY_PLL_CONTROL 0x08
23#define USB_PHY_TX_CTRL0 0x10
24#define USB_PHY_TX_CTRL1 0x14
25#define USB_PHY_TX_CTRL2 0x18
26#define USB_PHY_RX_CTRL 0x20
27#define USB_PHY_ANALOG 0x34
28
29/* USB_PHY_PLL */
30#define CLK_REF_DIV(x) ((x) << 4)
31#define FEEDBACK_CLK_DIV(x) ((x) << 8)
32
33/* USB_PHY_PLL_CONTROL */
34#define CLK_STABLE BIT(0)
35#define PLL_CTRL_PIN BIT(1)
36#define PLL_CTRL_REG BIT(2)
37#define PLL_ON BIT(3)
38#define PHASE_OFF_TOL_125 (0x0 << 5)
39#define PHASE_OFF_TOL_250 BIT(5)
40#define KVC0_CALIB (0x0 << 9)
41#define KVC0_REG_CTRL BIT(9)
42#define KVC0_HIGH (0x0 << 10)
43#define KVC0_LOW (0x3 << 10)
44#define CLK_BLK_EN BIT(13)
45
46/* USB_PHY_TX_CTRL0 */
47#define EXT_HS_RCAL_EN BIT(3)
48#define EXT_FS_RCAL_EN BIT(4)
49#define IMPCAL_VTH_DIV(x) ((x) << 5)
50#define EXT_RS_RCAL_DIV(x) ((x) << 8)
51#define EXT_FS_RCAL_DIV(x) ((x) << 12)
52
53/* USB_PHY_TX_CTRL1 */
54#define TX_VDD15_14 (0x0 << 4)
55#define TX_VDD15_15 BIT(4)
56#define TX_VDD15_16 (0x2 << 4)
57#define TX_VDD15_17 (0x3 << 4)
58#define TX_VDD12_VDD (0x0 << 6)
59#define TX_VDD12_11 BIT(6)
60#define TX_VDD12_12 (0x2 << 6)
61#define TX_VDD12_13 (0x3 << 6)
62#define LOW_VDD_EN BIT(8)
63#define TX_OUT_AMP(x) ((x) << 9)
64
65/* USB_PHY_TX_CTRL2 */
66#define TX_CHAN_CTRL_REG(x) ((x) << 0)
67#define DRV_SLEWRATE(x) ((x) << 4)
68#define IMP_CAL_FS_HS_DLY_0 (0x0 << 6)
69#define IMP_CAL_FS_HS_DLY_1 BIT(6)
70#define IMP_CAL_FS_HS_DLY_2 (0x2 << 6)
71#define IMP_CAL_FS_HS_DLY_3 (0x3 << 6)
72#define FS_DRV_EN_MASK(x) ((x) << 8)
73#define HS_DRV_EN_MASK(x) ((x) << 12)
74
75/* USB_PHY_RX_CTRL */
76#define PHASE_FREEZE_DLY_2_CL (0x0 << 0)
77#define PHASE_FREEZE_DLY_4_CL BIT(0)
78#define ACK_LENGTH_8_CL (0x0 << 2)
79#define ACK_LENGTH_12_CL BIT(2)
80#define ACK_LENGTH_16_CL (0x2 << 2)
81#define ACK_LENGTH_20_CL (0x3 << 2)
82#define SQ_LENGTH_3 (0x0 << 4)
83#define SQ_LENGTH_6 BIT(4)
84#define SQ_LENGTH_9 (0x2 << 4)
85#define SQ_LENGTH_12 (0x3 << 4)
86#define DISCON_THRESHOLD_260 (0x0 << 6)
87#define DISCON_THRESHOLD_270 BIT(6)
88#define DISCON_THRESHOLD_280 (0x2 << 6)
89#define DISCON_THRESHOLD_290 (0x3 << 6)
90#define SQ_THRESHOLD(x) ((x) << 8)
91#define LPF_COEF(x) ((x) << 12)
92#define INTPL_CUR_10 (0x0 << 14)
93#define INTPL_CUR_20 BIT(14)
94#define INTPL_CUR_30 (0x2 << 14)
95#define INTPL_CUR_40 (0x3 << 14)
96
97/* USB_PHY_ANALOG */
98#define ANA_PWR_UP BIT(1)
99#define ANA_PWR_DOWN BIT(2)
100#define V2I_VCO_RATIO(x) ((x) << 7)
101#define R_ROTATE_90 (0x0 << 10)
102#define R_ROTATE_0 BIT(10)
103#define MODE_TEST_EN BIT(11)
104#define ANA_TEST_DC_CTRL(x) ((x) << 12)
105
Antoine Tenart13ebb682014-11-20 22:53:25 +0100106static const u32 phy_berlin_pll_dividers[] = {
107 /* Berlin 2 */
Thomas Hebbdcb54fc2015-07-02 01:04:26 -0400108 CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
Thomas Hebb96696a92015-07-02 01:04:18 -0400109 /* Berlin 2CD/Q */
110 CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
Antoine Tenart13ebb682014-11-20 22:53:25 +0100111};
112
113struct phy_berlin_usb_priv {
114 void __iomem *base;
Antoine Tenart13ebb682014-11-20 22:53:25 +0100115 struct reset_control *rst_ctrl;
116 u32 pll_divider;
117};
118
119static int phy_berlin_usb_power_on(struct phy *phy)
120{
Axel Lin739ae342015-03-10 17:05:33 +0800121 struct phy_berlin_usb_priv *priv = phy_get_drvdata(phy);
Antoine Tenart13ebb682014-11-20 22:53:25 +0100122
123 reset_control_reset(priv->rst_ctrl);
124
125 writel(priv->pll_divider,
126 priv->base + USB_PHY_PLL);
127 writel(CLK_STABLE | PLL_CTRL_REG | PHASE_OFF_TOL_250 | KVC0_REG_CTRL |
128 CLK_BLK_EN, priv->base + USB_PHY_PLL_CONTROL);
129 writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5),
130 priv->base + USB_PHY_ANALOG);
131 writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 |
132 DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) |
133 INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL);
134
135 writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1);
136 writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
137 priv->base + USB_PHY_TX_CTRL0);
138
139 writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4) |
140 EXT_FS_RCAL_DIV(0x2), priv->base + USB_PHY_TX_CTRL0);
141
142 writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
143 priv->base + USB_PHY_TX_CTRL0);
144 writel(TX_CHAN_CTRL_REG(0xf) | DRV_SLEWRATE(0x3) | IMP_CAL_FS_HS_DLY_3 |
145 FS_DRV_EN_MASK(0xd), priv->base + USB_PHY_TX_CTRL2);
146
147 return 0;
148}
149
Axel Lin4a9e5ca2015-07-15 15:33:51 +0800150static const struct phy_ops phy_berlin_usb_ops = {
Antoine Tenart13ebb682014-11-20 22:53:25 +0100151 .power_on = phy_berlin_usb_power_on,
152 .owner = THIS_MODULE,
153};
154
Michal Simek456dedc2015-06-24 10:40:54 +0200155static const struct of_device_id phy_berlin_usb_of_match[] = {
Antoine Tenart13ebb682014-11-20 22:53:25 +0100156 {
157 .compatible = "marvell,berlin2-usb-phy",
158 .data = &phy_berlin_pll_dividers[0],
159 },
160 {
161 .compatible = "marvell,berlin2cd-usb-phy",
162 .data = &phy_berlin_pll_dividers[1],
163 },
164 { },
165};
Michal Simek456dedc2015-06-24 10:40:54 +0200166MODULE_DEVICE_TABLE(of, phy_berlin_usb_of_match);
Antoine Tenart13ebb682014-11-20 22:53:25 +0100167
168static int phy_berlin_usb_probe(struct platform_device *pdev)
169{
170 const struct of_device_id *match =
Michal Simek456dedc2015-06-24 10:40:54 +0200171 of_match_device(phy_berlin_usb_of_match, &pdev->dev);
Antoine Tenart13ebb682014-11-20 22:53:25 +0100172 struct phy_berlin_usb_priv *priv;
173 struct resource *res;
Axel Lin739ae342015-03-10 17:05:33 +0800174 struct phy *phy;
Antoine Tenart13ebb682014-11-20 22:53:25 +0100175 struct phy_provider *phy_provider;
176
177 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
178 if (!priv)
179 return -ENOMEM;
180
181 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
182 priv->base = devm_ioremap_resource(&pdev->dev, res);
183 if (IS_ERR(priv->base))
184 return PTR_ERR(priv->base);
185
186 priv->rst_ctrl = devm_reset_control_get(&pdev->dev, NULL);
187 if (IS_ERR(priv->rst_ctrl))
188 return PTR_ERR(priv->rst_ctrl);
189
190 priv->pll_divider = *((u32 *)match->data);
191
Axel Lin739ae342015-03-10 17:05:33 +0800192 phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops);
193 if (IS_ERR(phy)) {
Antoine Tenart13ebb682014-11-20 22:53:25 +0100194 dev_err(&pdev->dev, "failed to create PHY\n");
Axel Lin739ae342015-03-10 17:05:33 +0800195 return PTR_ERR(phy);
Antoine Tenart13ebb682014-11-20 22:53:25 +0100196 }
197
198 platform_set_drvdata(pdev, priv);
Axel Lin739ae342015-03-10 17:05:33 +0800199 phy_set_drvdata(phy, priv);
Antoine Tenart13ebb682014-11-20 22:53:25 +0100200
201 phy_provider =
202 devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
Axel Lin82ffb6762015-03-01 22:31:34 +0800203 return PTR_ERR_OR_ZERO(phy_provider);
Antoine Tenart13ebb682014-11-20 22:53:25 +0100204}
205
206static struct platform_driver phy_berlin_usb_driver = {
207 .probe = phy_berlin_usb_probe,
208 .driver = {
209 .name = "phy-berlin-usb",
Michal Simek456dedc2015-06-24 10:40:54 +0200210 .of_match_table = phy_berlin_usb_of_match,
Michal Simek2508aae2015-06-24 10:40:55 +0200211 },
Antoine Tenart13ebb682014-11-20 22:53:25 +0100212};
213module_platform_driver(phy_berlin_usb_driver);
214
215MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
216MODULE_DESCRIPTION("Marvell Berlin PHY driver for USB");
217MODULE_LICENSE("GPL");