drivers/regulator/ab8500.c

/*
 * Copyright (C) ST-Ericsson SA 2010
 *
 * License Terms: GNU General Public License v2
 *
 * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
 *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
 *
 * AB8500 peripheral regulators
 *
 * AB8500 supports the following regulators:
 *   VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
 */
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/of.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/ab8500.h>
#include <linux/slab.h>

/**
 * struct ab8500_regulator_info - ab8500 regulator information
 * @dev: device pointer
 * @desc: regulator description
 * @regulator_dev: regulator device
 * @update_bank: bank to control on/off
 * @update_reg: register to control on/off
 * @update_mask: mask to enable/disable regulator
 * @update_val_enable: bits to enable the regulator in normal (high power) mode
 * @voltage_bank: bank to control regulator voltage
 * @voltage_reg: register to control regulator voltage
 * @voltage_mask: mask to control regulator voltage
 * @voltage_shift: shift to control regulator voltage
 * @delay: startup/set voltage delay in us
 */
struct ab8500_regulator_info {
	struct device		*dev;
	struct regulator_desc	desc;
	struct regulator_dev	*regulator;
	u8 update_bank;
	u8 update_reg;
	u8 update_mask;
	u8 update_val_enable;
	u8 voltage_bank;
	u8 voltage_reg;
	u8 voltage_mask;
	u8 voltage_shift;
	unsigned int delay;
};

/* voltage tables for the vauxn/vintcore supplies */
static const unsigned int ldo_vauxn_voltages[] = {
	1100000,
	1200000,
	1300000,
	1400000,
	1500000,
	1800000,
	1850000,
	1900000,
	2500000,
	2650000,
	2700000,
	2750000,
	2800000,
	2900000,
	3000000,
	3300000,
};

static const unsigned int ldo_vaux3_voltages[] = {
	1200000,
	1500000,
	1800000,
	2100000,
	2500000,
	2750000,
	2790000,
	2910000,
};

static const unsigned int ldo_vintcore_voltages[] = {
	1200000,
	1225000,
	1250000,
	1275000,
	1300000,
	1325000,
	1350000,
};

static int ab8500_regulator_enable(struct regulator_dev *rdev)
{
	int ret;
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);

	if (info == NULL) {
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
		return -EINVAL;
	}

	ret = abx500_mask_and_set_register_interruptible(info->dev,
		info->update_bank, info->update_reg,
		info->update_mask, info->update_val_enable);
	if (ret < 0)
		dev_err(rdev_get_dev(rdev),
			"couldn't set enable bits for regulator\n");

	dev_vdbg(rdev_get_dev(rdev),
		"%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
		info->desc.name, info->update_bank, info->update_reg,
		info->update_mask, info->update_val_enable);

	return ret;
}

static int ab8500_regulator_disable(struct regulator_dev *rdev)
{
	int ret;
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);

	if (info == NULL) {
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
		return -EINVAL;
	}

	ret = abx500_mask_and_set_register_interruptible(info->dev,
		info->update_bank, info->update_reg,
		info->update_mask, 0x0);
	if (ret < 0)
		dev_err(rdev_get_dev(rdev),
			"couldn't set disable bits for regulator\n");

	dev_vdbg(rdev_get_dev(rdev),
		"%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
		info->desc.name, info->update_bank, info->update_reg,
		info->update_mask, 0x0);

	return ret;
}

static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
{
	int ret;
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
	u8 regval;

	if (info == NULL) {
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
		return -EINVAL;
	}

	ret = abx500_get_register_interruptible(info->dev,
		info->update_bank, info->update_reg, &regval);
	if (ret < 0) {
		dev_err(rdev_get_dev(rdev),
			"couldn't read 0x%x register\n", info->update_reg);
		return ret;
	}

	dev_vdbg(rdev_get_dev(rdev),
		"%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
		" 0x%x\n",
		info->desc.name, info->update_bank, info->update_reg,
		info->update_mask, regval);

	if (regval & info->update_mask)
		return true;
	else
		return false;
}

static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
	int ret, val;
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
	u8 regval;

	if (info == NULL) {
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
		return -EINVAL;
	}

	ret = abx500_get_register_interruptible(info->dev,
			info->voltage_bank, info->voltage_reg, &regval);
	if (ret < 0) {
		dev_err(rdev_get_dev(rdev),
			"couldn't read voltage reg for regulator\n");
		return ret;
	}

	dev_vdbg(rdev_get_dev(rdev),
		"%s-get_voltage (bank, reg, mask, shift, value): "
		"0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
		info->desc.name, info->voltage_bank,
		info->voltage_reg, info->voltage_mask,
		info->voltage_shift, regval);

	val = regval & info->voltage_mask;
	return val >> info->voltage_shift;
}

static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
					    unsigned selector)
{
	int ret;
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
	u8 regval;

	if (info == NULL) {
		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
		return -EINVAL;
	}

	/* set the registers for the request */
	regval = (u8)selector << info->voltage_shift;
	ret = abx500_mask_and_set_register_interruptible(info->dev,
			info->voltage_bank, info->voltage_reg,
			info->voltage_mask, regval);
	if (ret < 0)
		dev_err(rdev_get_dev(rdev),
		"couldn't set voltage reg for regulator\n");

	dev_vdbg(rdev_get_dev(rdev),
		"%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
		" 0x%x\n",
		info->desc.name, info->voltage_bank, info->voltage_reg,
		info->voltage_mask, regval);

	return ret;
}

static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
					     unsigned int old_sel,
					     unsigned int new_sel)
{
	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);

	return info->delay;
}

static struct regulator_ops ab8500_regulator_ops = {
	.enable		= ab8500_regulator_enable,
	.disable	= ab8500_regulator_disable,
	.is_enabled	= ab8500_regulator_is_enabled,
	.get_voltage_sel = ab8500_regulator_get_voltage_sel,
	.set_voltage_sel = ab8500_regulator_set_voltage_sel,
	.list_voltage	= regulator_list_voltage_table,
	.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};

static struct regulator_ops ab8500_regulator_fixed_ops = {
	.enable		= ab8500_regulator_enable,
	.disable	= ab8500_regulator_disable,
	.is_enabled	= ab8500_regulator_is_enabled,
	.list_voltage	= regulator_list_voltage_linear,
};

static struct ab8500_regulator_info
		ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
	/*
	 * Variable Voltage Regulators
	 *   name, min mV, max mV,
	 *   update bank, reg, mask, enable val
	 *   volt bank, reg, mask
	 */
	[AB8500_LDO_AUX1] = {
		.desc = {
			.name		= "LDO-AUX1",
			.ops		= &ab8500_regulator_ops,
			.type		= REGULATOR_VOLTAGE,
			.id		= AB8500_LDO_AUX1,
			.owner		= THIS_MODULE,
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
			.volt_table	= ldo_vauxn_voltages,
		},
		.update_bank		= 0x04,
		.update_reg		= 0x09,
		.update_mask		= 0x03,
		.update_val_enable	= 0x01,
		.voltage_bank		= 0x04,
		.voltage_reg		= 0x1f,
		.voltage_mask		= 0x0f,
	},
	[AB8500_LDO_AUX2] = {
		.desc = {
			.name		= "LDO-AUX2",
			.ops		= &ab8500_regulator_ops,
			.type		= REGULATOR_VOLTAGE,
			.id		= AB8500_LDO_AUX2,
			.owner		= THIS_MODULE,
			.n_voltages	= ARRAY_SIZE(ldo_vauxn_voltages),
			.volt_table	= ldo_vauxn_voltages,
		},
		.update_bank		= 0x04,
		.update_reg		= 0x09,
		.update_mask		= 0x0c,
		.update_val_enable	= 0x04,
		.voltage_bank		= 0x04,
		.voltage_reg		= 0x20,
		.voltage_mask		= 0x0f,
	},
	[AB8500_LDO_AUX3] = {
		.desc = {
			.name		= "LDO-AUX3",
			.ops		= &ab8500_regulator_ops,
			.type		= REGULATOR_VOLTAGE,
			.id		= AB8500_LDO_AUX3,
			.owner		= THIS_MODULE,
			.n_voltages	= ARRAY_SIZE(ldo_vaux3_voltages),
			.volt_table	= ldo_vaux3_voltages,
		},
		.update_bank		= 0x04,
		.update_reg		= 0x0a,
		.update_mask		= 0x03,
		.update_val_enable	= 0x01,
		.voltage_bank		= 0x04,
		.voltage_reg		= 0x21,
		.voltage_mask		= 0x07,
	},
	[AB8500_LDO_INTCORE] = {
		.desc = {
			.name		= "LDO-INTCORE",
			.ops		= &ab8500_regulator_ops,
			.type		= REGULATOR_VOLTAGE,
			.id		= AB8500_LDO_INTCORE,
			.owner		= THIS_MODULE,
			.n_voltages	= ARRAY_SIZE(ldo_vintcore_voltages),
			.volt_table	= ldo_vintcore_voltages,
		},
		.update_bank		= 0x03,
		.update_reg		= 0x80,
		.update_mask		= 0x44,
		.update_val_enable	= 0x04,
		.voltage_bank		= 0x03,
		.voltage_reg		= 0x80,
		.voltage_mask		= 0x38,
		.voltage_shift		= 3,
	},

	/*
	 * Fixed Voltage Regulators
	 *   name, fixed mV,
	 *   update bank, reg, mask, enable val
	 */
	[AB8500_LDO_TVOUT] = {
		.desc = {
			.name		= "LDO-TVOUT",
			.ops		= &ab8500_regulator_fixed_ops,
			.type		= REGULATOR_VOLTAGE,
			.id		= AB8500_LDO_TVOUT,
			.owner		= THIS_MODULE,
			.n_voltages	= 1,
			.min_uV		= 2000000,
			.enable_time	= 10000,
		},
		.delay			= 10000,
		.update_bank		= 0x03,
		.update_reg		= 0x80,
		.update_mask		= 0x82,
		.update_val_enable	= 0x02,
	},
	[AB8500_LDO_USB] = {
		.desc = {
			.name           = "LDO-USB",
			.ops            = &ab8500_regulator_fixed_ops,
			.type           = REGULATOR_VOLTAGE,
			.id             = AB8500_LDO_USB,
			.owner          = THIS_MODULE,
			.n_voltages     = 1,
			.min_uV		= 3300000,
		},
		.update_bank            = 0x03,
		.update_reg             = 0x82,
		.update_mask            = 0x03,
		.update_val_enable      = 0x01,
	},
	[AB8500_LDO_AUDIO] = {
		.desc = {
			.name		= "LDO-AUDIO",
			.ops		= &ab8500_regulator_fixed_ops,
			.type		= REGULATOR_VOLTAGE,
			.id		= AB8500_LDO_AUDIO,
			.owner		= THIS_MODULE,
			.n_voltages	= 1,
			.min_uV		= 2000000,
		},
		.update_bank		= 0x03,
		.update_reg		= 0x83,
		.update_mask		= 0x02,
		.update_val_enable	= 0x02,
	},
	[AB8500_LDO_ANAMIC1] = {
		.desc = {
			.name		= "LDO-ANAMIC1",
			.ops		= &ab8500_regulator_fixed_ops,
			.type		= REGULATOR_VOLTAGE,
			.id		= AB8500_LDO_ANAMIC1,
			.owner		= THIS_MODULE,
			.n_voltages	= 1,
			.min_uV		= 2050000,
		},
		.update_bank		= 0x03,
		.update_reg		= 0x83,
		.update_mask		= 0x08,
		.update_val_enable	= 0x08,
	},
	[AB8500_LDO_ANAMIC2] = {
		.desc = {
			.name		= "LDO-ANAMIC2",
			.ops		= &ab8500_regulator_fixed_ops,
			.type		= REGULATOR_VOLTAGE,
			.id		= AB8500_LDO_ANAMIC2,
			.owner		= THIS_MODULE,
			.n_voltages	= 1,
			.min_uV		= 2050000,
		},
		.update_bank		= 0x03,
		.update_reg		= 0x83,
		.update_mask		= 0x10,
		.update_val_enable	= 0x10,
	},
	[AB8500_LDO_DMIC] = {
		.desc = {
			.name		= "LDO-DMIC",
			.ops		= &ab8500_regulator_fixed_ops,
			.type		= REGULATOR_VOLTAGE,
			.id		= AB8500_LDO_DMIC,
			.owner		= THIS_MODULE,
			.n_voltages	= 1,
			.min_uV		= 1800000,
		},
		.update_bank		= 0x03,
		.update_reg		= 0x83,
		.update_mask		= 0x04,
		.update_val_enable	= 0x04,
	},
	[AB8500_LDO_ANA] = {
		.desc = {
			.name		= "LDO-ANA",
			.ops		= &ab8500_regulator_fixed_ops,
			.type		= REGULATOR_VOLTAGE,
			.id		= AB8500_LDO_ANA,
			.owner		= THIS_MODULE,
			.n_voltages	= 1,
			.min_uV		= 1200000,
		},
		.update_bank		= 0x04,
		.update_reg		= 0x06,
		.update_mask		= 0x0c,
		.update_val_enable	= 0x04,
	},


};

struct ab8500_reg_init {
	u8 bank;
	u8 addr;
	u8 mask;
};

#define REG_INIT(_id, _bank, _addr, _mask)	\
	[_id] = {				\
		.bank = _bank,			\
		.addr = _addr,			\
		.mask = _mask,			\
	}

static struct ab8500_reg_init ab8500_reg_init[] = {
	/*
	 * 0x30, VanaRequestCtrl
	 * 0x0C, VpllRequestCtrl
	 * 0xc0, VextSupply1RequestCtrl
	 */
	REG_INIT(AB8500_REGUREQUESTCTRL2,	0x03, 0x04, 0xfc),
	/*
	 * 0x03, VextSupply2RequestCtrl
	 * 0x0c, VextSupply3RequestCtrl
	 * 0x30, Vaux1RequestCtrl
	 * 0xc0, Vaux2RequestCtrl
	 */
	REG_INIT(AB8500_REGUREQUESTCTRL3,	0x03, 0x05, 0xff),
	/*
	 * 0x03, Vaux3RequestCtrl
	 * 0x04, SwHPReq
	 */
	REG_INIT(AB8500_REGUREQUESTCTRL4,	0x03, 0x06, 0x07),
	/*
	 * 0x08, VanaSysClkReq1HPValid
	 * 0x20, Vaux1SysClkReq1HPValid
	 * 0x40, Vaux2SysClkReq1HPValid
	 * 0x80, Vaux3SysClkReq1HPValid
	 */
	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1,	0x03, 0x07, 0xe8),
	/*
	 * 0x10, VextSupply1SysClkReq1HPValid
	 * 0x20, VextSupply2SysClkReq1HPValid
	 * 0x40, VextSupply3SysClkReq1HPValid
	 */
	REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2,	0x03, 0x08, 0x70),
	/*
	 * 0x08, VanaHwHPReq1Valid
	 * 0x20, Vaux1HwHPReq1Valid
	 * 0x40, Vaux2HwHPReq1Valid
	 * 0x80, Vaux3HwHPReq1Valid
	 */
	REG_INIT(AB8500_REGUHWHPREQ1VALID1,	0x03, 0x09, 0xe8),
	/*
	 * 0x01, VextSupply1HwHPReq1Valid
	 * 0x02, VextSupply2HwHPReq1Valid
	 * 0x04, VextSupply3HwHPReq1Valid
	 */
	REG_INIT(AB8500_REGUHWHPREQ1VALID2,	0x03, 0x0a, 0x07),
	/*
	 * 0x08, VanaHwHPReq2Valid
	 * 0x20, Vaux1HwHPReq2Valid
	 * 0x40, Vaux2HwHPReq2Valid
	 * 0x80, Vaux3HwHPReq2Valid
	 */
	REG_INIT(AB8500_REGUHWHPREQ2VALID1,	0x03, 0x0b, 0xe8),
	/*
	 * 0x01, VextSupply1HwHPReq2Valid
	 * 0x02, VextSupply2HwHPReq2Valid
	 * 0x04, VextSupply3HwHPReq2Valid
	 */
	REG_INIT(AB8500_REGUHWHPREQ2VALID2,	0x03, 0x0c, 0x07),
	/*
	 * 0x20, VanaSwHPReqValid
	 * 0x80, Vaux1SwHPReqValid
	 */
	REG_INIT(AB8500_REGUSWHPREQVALID1,	0x03, 0x0d, 0xa0),
	/*
	 * 0x01, Vaux2SwHPReqValid
	 * 0x02, Vaux3SwHPReqValid
	 * 0x04, VextSupply1SwHPReqValid
	 * 0x08, VextSupply2SwHPReqValid
	 * 0x10, VextSupply3SwHPReqValid
	 */
	REG_INIT(AB8500_REGUSWHPREQVALID2,	0x03, 0x0e, 0x1f),
	/*
	 * 0x02, SysClkReq2Valid1
	 * ...
	 * 0x80, SysClkReq8Valid1
	 */
	REG_INIT(AB8500_REGUSYSCLKREQVALID1,	0x03, 0x0f, 0xfe),
	/*
	 * 0x02, SysClkReq2Valid2
	 * ...
	 * 0x80, SysClkReq8Valid2
	 */
	REG_INIT(AB8500_REGUSYSCLKREQVALID2,	0x03, 0x10, 0xfe),
	/*
	 * 0x02, VTVoutEna
	 * 0x04, Vintcore12Ena
	 * 0x38, Vintcore12Sel
	 * 0x40, Vintcore12LP
	 * 0x80, VTVoutLP
	 */
	REG_INIT(AB8500_REGUMISC1,		0x03, 0x80, 0xfe),
	/*
	 * 0x02, VaudioEna
	 * 0x04, VdmicEna
	 * 0x08, Vamic1Ena
	 * 0x10, Vamic2Ena
	 */
	REG_INIT(AB8500_VAUDIOSUPPLY,		0x03, 0x83, 0x1e),
	/*
	 * 0x01, Vamic1_dzout
	 * 0x02, Vamic2_dzout
	 */
	REG_INIT(AB8500_REGUCTRL1VAMIC,		0x03, 0x84, 0x03),
	/*
	 * 0x0c, VanaRegu
	 * 0x03, VpllRegu
	 */
	REG_INIT(AB8500_VPLLVANAREGU,		0x04, 0x06, 0x0f),
	/*
	 * 0x01, VrefDDREna
	 * 0x02, VrefDDRSleepMode
	 */
	REG_INIT(AB8500_VREFDDR,		0x04, 0x07, 0x03),
	/*
	 * 0x03, VextSupply1Regu
	 * 0x0c, VextSupply2Regu
	 * 0x30, VextSupply3Regu
	 * 0x40, ExtSupply2Bypass
	 * 0x80, ExtSupply3Bypass
	 */
	REG_INIT(AB8500_EXTSUPPLYREGU,		0x04, 0x08, 0xff),
	/*
	 * 0x03, Vaux1Regu
	 * 0x0c, Vaux2Regu
	 */
	REG_INIT(AB8500_VAUX12REGU,		0x04, 0x09, 0x0f),
	/*
	 * 0x03, Vaux3Regu
	 */
	REG_INIT(AB8500_VRF1VAUX3REGU,		0x04, 0x0a, 0x03),
	/*
	 * 0x3f, Vsmps1Sel1
	 */
	REG_INIT(AB8500_VSMPS1SEL1,		0x04, 0x13, 0x3f),
	/*
	 * 0x0f, Vaux1Sel
	 */
	REG_INIT(AB8500_VAUX1SEL,		0x04, 0x1f, 0x0f),
	/*
	 * 0x0f, Vaux2Sel
	 */
	REG_INIT(AB8500_VAUX2SEL,		0x04, 0x20, 0x0f),
	/*
	 * 0x07, Vaux3Sel
	 */
	REG_INIT(AB8500_VRF1VAUX3SEL,		0x04, 0x21, 0x07),
	/*
	 * 0x01, VextSupply12LP
	 */
	REG_INIT(AB8500_REGUCTRL2SPARE,		0x04, 0x22, 0x01),
	/*
	 * 0x04, Vaux1Disch
	 * 0x08, Vaux2Disch
	 * 0x10, Vaux3Disch
	 * 0x20, Vintcore12Disch
	 * 0x40, VTVoutDisch
	 * 0x80, VaudioDisch
	 */
	REG_INIT(AB8500_REGUCTRLDISCH,		0x04, 0x43, 0xfc),
	/*
	 * 0x02, VanaDisch
	 * 0x04, VdmicPullDownEna
	 * 0x10, VdmicDisch
	 */
	REG_INIT(AB8500_REGUCTRLDISCH2,		0x04, 0x44, 0x16),
};

static __devinit int
ab8500_regulator_init_registers(struct platform_device *pdev, int id, int value)
{
	int err;

	if (value & ~ab8500_reg_init[id].mask) {
		dev_err(&pdev->dev,
			"Configuration error: value outside mask.\n");
		return -EINVAL;
	}

	err = abx500_mask_and_set_register_interruptible(
		&pdev->dev,
		ab8500_reg_init[id].bank,
		ab8500_reg_init[id].addr,
		ab8500_reg_init[id].mask,
		value);
	if (err < 0) {
		dev_err(&pdev->dev,
			"Failed to initialize 0x%02x, 0x%02x.\n",
			ab8500_reg_init[id].bank,
			ab8500_reg_init[id].addr);
		return err;
	}

	dev_vdbg(&pdev->dev,
		"init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
		ab8500_reg_init[id].bank,
		ab8500_reg_init[id].addr,
		ab8500_reg_init[id].mask,
		value);

	return 0;
}

static __devinit int ab8500_regulator_register(struct platform_device *pdev,
					struct regulator_init_data *init_data,
					int id,
					struct device_node *np)
{
	struct ab8500_regulator_info *info = NULL;
	struct regulator_config config = { };
	int err;

	/* assign per-regulator data */
	info = &ab8500_regulator_info[id];
	info->dev = &pdev->dev;

	config.dev = &pdev->dev;
	config.init_data = init_data;
	config.driver_data = info;
	config.of_node = np;

	/* fix for hardware before ab8500v2.0 */
	if (abx500_get_chip_id(info->dev) < 0x20) {
		if (info->desc.id == AB8500_LDO_AUX3) {
			info->desc.n_voltages =
				ARRAY_SIZE(ldo_vauxn_voltages);
			info->desc.volt_table = ldo_vauxn_voltages;
			info->voltage_mask = 0xf;
		}
	}

	/* register regulator with framework */
	info->regulator = regulator_register(&info->desc, &config);
	if (IS_ERR(info->regulator)) {
		err = PTR_ERR(info->regulator);
		dev_err(&pdev->dev, "failed to register regulator %s\n",
			info->desc.name);
		/* when we fail, un-register all earlier regulators */
		while (--id >= 0) {
			info = &ab8500_regulator_info[id];
			regulator_unregister(info->regulator);
		}
		return err;
	}

	return 0;
}

static struct of_regulator_match ab8500_regulator_matches[] = {
	{ .name	= "ab8500_ldo_aux1",    .driver_data = (void *) AB8500_LDO_AUX1, },
	{ .name	= "ab8500_ldo_aux2",    .driver_data = (void *) AB8500_LDO_AUX2, },
	{ .name	= "ab8500_ldo_aux3",    .driver_data = (void *) AB8500_LDO_AUX3, },
	{ .name	= "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
	{ .name	= "ab8500_ldo_tvout",   .driver_data = (void *) AB8500_LDO_TVOUT, },
	{ .name = "ab8500_ldo_usb",     .driver_data = (void *) AB8500_LDO_USB, },
	{ .name = "ab8500_ldo_audio",   .driver_data = (void *) AB8500_LDO_AUDIO, },
	{ .name	= "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
	{ .name	= "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
	{ .name	= "ab8500_ldo_dmic",    .driver_data = (void *) AB8500_LDO_DMIC, },
	{ .name	= "ab8500_ldo_ana",     .driver_data = (void *) AB8500_LDO_ANA, },
};

static __devinit int
ab8500_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
{
	int err, i;

	for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
		err = ab8500_regulator_register(
			pdev, ab8500_regulator_matches[i].init_data,
			i, ab8500_regulator_matches[i].of_node);
		if (err)
			return err;
	}

	return 0;
}

static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
{
	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
	struct ab8500_platform_data *pdata;
	struct device_node *np = pdev->dev.of_node;
	int i, err;

	if (np) {
		err = of_regulator_match(&pdev->dev, np,
					ab8500_regulator_matches,
					ARRAY_SIZE(ab8500_regulator_matches));
		if (err < 0) {
			dev_err(&pdev->dev,
				"Error parsing regulator init data: %d\n", err);
			return err;
		}

		err = ab8500_regulator_of_probe(pdev, np);
		return err;
	}

	if (!ab8500) {
		dev_err(&pdev->dev, "null mfd parent\n");
		return -EINVAL;
	}
	pdata = dev_get_platdata(ab8500->dev);
	if (!pdata) {
		dev_err(&pdev->dev, "null pdata\n");
		return -EINVAL;
	}

	/* make sure the platform data has the correct size */
	if (pdata->num_regulator != ARRAY_SIZE(ab8500_regulator_info)) {
		dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
		return -EINVAL;
	}

	/* initialize registers */
	for (i = 0; i < pdata->num_regulator_reg_init; i++) {
		int id, value;

		id = pdata->regulator_reg_init[i].id;
		value = pdata->regulator_reg_init[i].value;

		/* check for configuration errors */
		if (id >= AB8500_NUM_REGULATOR_REGISTERS) {
			dev_err(&pdev->dev,
				"Configuration error: id outside range.\n");
			return -EINVAL;
		}

		err = ab8500_regulator_init_registers(pdev, id, value);
		if (err < 0)
			return err;
	}

	/* register all regulators */
	for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
		err = ab8500_regulator_register(pdev, &pdata->regulator[i], i, NULL);
		if (err < 0)
			return err;
	}

	return 0;
}

static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
		struct ab8500_regulator_info *info = NULL;
		info = &ab8500_regulator_info[i];

		dev_vdbg(rdev_get_dev(info->regulator),
			"%s-remove\n", info->desc.name);

		regulator_unregister(info->regulator);
	}

	return 0;
}

static struct platform_driver ab8500_regulator_driver = {
	.probe = ab8500_regulator_probe,
	.remove = __devexit_p(ab8500_regulator_remove),
	.driver         = {
		.name   = "ab8500-regulator",
		.owner  = THIS_MODULE,
	},
};

static int __init ab8500_regulator_init(void)
{
	int ret;

	ret = platform_driver_register(&ab8500_regulator_driver);
	if (ret != 0)
		pr_err("Failed to register ab8500 regulator: %d\n", ret);

	return ret;
}
subsys_initcall(ab8500_regulator_init);

static void __exit ab8500_regulator_exit(void)
{
	platform_driver_unregister(&ab8500_regulator_driver);
}
module_exit(ab8500_regulator_exit);

MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
MODULE_ALIAS("platform:ab8500-regulator");