blob: f7287497ba6e70a4b57074151bcccaa8e38c5e10 [file] [log] [blame]
David S. Miller99c4a632009-09-25 12:14:43 -07001/*
2 * at91_can.c - CAN network driver for AT91 SoC CAN controller
3 *
4 * (C) 2007 by Hans J. Koch <hjk@linutronix.de>
5 * (C) 2008, 2009 by Marc Kleine-Budde <kernel@pengutronix.de>
6 *
7 * This software may be distributed under the terms of the GNU General
8 * Public License ("GPL") version 2 as distributed in the 'COPYING'
9 * file from the main directory of the linux kernel source.
10 *
11 * Send feedback to <socketcan-users@lists.berlios.de>
12 *
13 *
14 * Your platform definition file should specify something like:
15 *
16 * static struct at91_can_data ek_can_data = {
17 * transceiver_switch = sam9263ek_transceiver_switch,
18 * };
19 *
20 * at91_add_device_can(&ek_can_data);
21 *
22 */
23
24#include <linux/clk.h>
25#include <linux/errno.h>
26#include <linux/if_arp.h>
27#include <linux/init.h>
28#include <linux/interrupt.h>
29#include <linux/kernel.h>
30#include <linux/module.h>
31#include <linux/netdevice.h>
32#include <linux/platform_device.h>
33#include <linux/skbuff.h>
34#include <linux/spinlock.h>
35#include <linux/string.h>
36#include <linux/types.h>
37
38#include <linux/can.h>
39#include <linux/can/dev.h>
40#include <linux/can/error.h>
41
42#include <mach/board.h>
43
44#define DRV_NAME "at91_can"
45#define AT91_NAPI_WEIGHT 12
46
47/*
48 * RX/TX Mailbox split
49 * don't dare to touch
50 */
51#define AT91_MB_RX_NUM 12
52#define AT91_MB_TX_SHIFT 2
53
54#define AT91_MB_RX_FIRST 0
55#define AT91_MB_RX_LAST (AT91_MB_RX_FIRST + AT91_MB_RX_NUM - 1)
56
57#define AT91_MB_RX_MASK(i) ((1 << (i)) - 1)
58#define AT91_MB_RX_SPLIT 8
59#define AT91_MB_RX_LOW_LAST (AT91_MB_RX_SPLIT - 1)
60#define AT91_MB_RX_LOW_MASK (AT91_MB_RX_MASK(AT91_MB_RX_SPLIT))
61
62#define AT91_MB_TX_NUM (1 << AT91_MB_TX_SHIFT)
63#define AT91_MB_TX_FIRST (AT91_MB_RX_LAST + 1)
64#define AT91_MB_TX_LAST (AT91_MB_TX_FIRST + AT91_MB_TX_NUM - 1)
65
66#define AT91_NEXT_PRIO_SHIFT (AT91_MB_TX_SHIFT)
67#define AT91_NEXT_PRIO_MASK (0xf << AT91_MB_TX_SHIFT)
68#define AT91_NEXT_MB_MASK (AT91_MB_TX_NUM - 1)
69#define AT91_NEXT_MASK ((AT91_MB_TX_NUM - 1) | AT91_NEXT_PRIO_MASK)
70
71/* Common registers */
72enum at91_reg {
73 AT91_MR = 0x000,
74 AT91_IER = 0x004,
75 AT91_IDR = 0x008,
76 AT91_IMR = 0x00C,
77 AT91_SR = 0x010,
78 AT91_BR = 0x014,
79 AT91_TIM = 0x018,
80 AT91_TIMESTP = 0x01C,
81 AT91_ECR = 0x020,
82 AT91_TCR = 0x024,
83 AT91_ACR = 0x028,
84};
85
86/* Mailbox registers (0 <= i <= 15) */
87#define AT91_MMR(i) (enum at91_reg)(0x200 + ((i) * 0x20))
88#define AT91_MAM(i) (enum at91_reg)(0x204 + ((i) * 0x20))
89#define AT91_MID(i) (enum at91_reg)(0x208 + ((i) * 0x20))
90#define AT91_MFID(i) (enum at91_reg)(0x20C + ((i) * 0x20))
91#define AT91_MSR(i) (enum at91_reg)(0x210 + ((i) * 0x20))
92#define AT91_MDL(i) (enum at91_reg)(0x214 + ((i) * 0x20))
93#define AT91_MDH(i) (enum at91_reg)(0x218 + ((i) * 0x20))
94#define AT91_MCR(i) (enum at91_reg)(0x21C + ((i) * 0x20))
95
96/* Register bits */
97#define AT91_MR_CANEN BIT(0)
98#define AT91_MR_LPM BIT(1)
99#define AT91_MR_ABM BIT(2)
100#define AT91_MR_OVL BIT(3)
101#define AT91_MR_TEOF BIT(4)
102#define AT91_MR_TTM BIT(5)
103#define AT91_MR_TIMFRZ BIT(6)
104#define AT91_MR_DRPT BIT(7)
105
106#define AT91_SR_RBSY BIT(29)
107
108#define AT91_MMR_PRIO_SHIFT (16)
109
110#define AT91_MID_MIDE BIT(29)
111
112#define AT91_MSR_MRTR BIT(20)
113#define AT91_MSR_MABT BIT(22)
114#define AT91_MSR_MRDY BIT(23)
115#define AT91_MSR_MMI BIT(24)
116
117#define AT91_MCR_MRTR BIT(20)
118#define AT91_MCR_MTCR BIT(23)
119
120/* Mailbox Modes */
121enum at91_mb_mode {
122 AT91_MB_MODE_DISABLED = 0,
123 AT91_MB_MODE_RX = 1,
124 AT91_MB_MODE_RX_OVRWR = 2,
125 AT91_MB_MODE_TX = 3,
126 AT91_MB_MODE_CONSUMER = 4,
127 AT91_MB_MODE_PRODUCER = 5,
128};
129
130/* Interrupt mask bits */
131#define AT91_IRQ_MB_RX ((1 << (AT91_MB_RX_LAST + 1)) \
132 - (1 << AT91_MB_RX_FIRST))
133#define AT91_IRQ_MB_TX ((1 << (AT91_MB_TX_LAST + 1)) \
134 - (1 << AT91_MB_TX_FIRST))
135#define AT91_IRQ_MB_ALL (AT91_IRQ_MB_RX | AT91_IRQ_MB_TX)
136
137#define AT91_IRQ_ERRA (1 << 16)
138#define AT91_IRQ_WARN (1 << 17)
139#define AT91_IRQ_ERRP (1 << 18)
140#define AT91_IRQ_BOFF (1 << 19)
141#define AT91_IRQ_SLEEP (1 << 20)
142#define AT91_IRQ_WAKEUP (1 << 21)
143#define AT91_IRQ_TOVF (1 << 22)
144#define AT91_IRQ_TSTP (1 << 23)
145#define AT91_IRQ_CERR (1 << 24)
146#define AT91_IRQ_SERR (1 << 25)
147#define AT91_IRQ_AERR (1 << 26)
148#define AT91_IRQ_FERR (1 << 27)
149#define AT91_IRQ_BERR (1 << 28)
150
151#define AT91_IRQ_ERR_ALL (0x1fff0000)
152#define AT91_IRQ_ERR_FRAME (AT91_IRQ_CERR | AT91_IRQ_SERR | \
153 AT91_IRQ_AERR | AT91_IRQ_FERR | AT91_IRQ_BERR)
154#define AT91_IRQ_ERR_LINE (AT91_IRQ_ERRA | AT91_IRQ_WARN | \
155 AT91_IRQ_ERRP | AT91_IRQ_BOFF)
156
157#define AT91_IRQ_ALL (0x1fffffff)
158
159struct at91_priv {
160 struct can_priv can; /* must be the first member! */
161 struct net_device *dev;
162 struct napi_struct napi;
163
164 void __iomem *reg_base;
165
166 u32 reg_sr;
167 unsigned int tx_next;
168 unsigned int tx_echo;
169 unsigned int rx_next;
170
171 struct clk *clk;
172 struct at91_can_data *pdata;
173};
174
175static struct can_bittiming_const at91_bittiming_const = {
176 .tseg1_min = 4,
177 .tseg1_max = 16,
178 .tseg2_min = 2,
179 .tseg2_max = 8,
180 .sjw_max = 4,
181 .brp_min = 2,
182 .brp_max = 128,
183 .brp_inc = 1,
184};
185
186static inline int get_tx_next_mb(const struct at91_priv *priv)
187{
188 return (priv->tx_next & AT91_NEXT_MB_MASK) + AT91_MB_TX_FIRST;
189}
190
191static inline int get_tx_next_prio(const struct at91_priv *priv)
192{
193 return (priv->tx_next >> AT91_NEXT_PRIO_SHIFT) & 0xf;
194}
195
196static inline int get_tx_echo_mb(const struct at91_priv *priv)
197{
198 return (priv->tx_echo & AT91_NEXT_MB_MASK) + AT91_MB_TX_FIRST;
199}
200
201static inline u32 at91_read(const struct at91_priv *priv, enum at91_reg reg)
202{
203 return readl(priv->reg_base + reg);
204}
205
206static inline void at91_write(const struct at91_priv *priv, enum at91_reg reg,
207 u32 value)
208{
209 writel(value, priv->reg_base + reg);
210}
211
212static inline void set_mb_mode_prio(const struct at91_priv *priv,
213 unsigned int mb, enum at91_mb_mode mode, int prio)
214{
215 at91_write(priv, AT91_MMR(mb), (mode << 24) | (prio << 16));
216}
217
218static inline void set_mb_mode(const struct at91_priv *priv, unsigned int mb,
219 enum at91_mb_mode mode)
220{
221 set_mb_mode_prio(priv, mb, mode, 0);
222}
223
David S. Miller99c4a632009-09-25 12:14:43 -0700224/*
225 * Swtich transceiver on or off
226 */
227static void at91_transceiver_switch(const struct at91_priv *priv, int on)
228{
229 if (priv->pdata && priv->pdata->transceiver_switch)
230 priv->pdata->transceiver_switch(on);
231}
232
233static void at91_setup_mailboxes(struct net_device *dev)
234{
235 struct at91_priv *priv = netdev_priv(dev);
236 unsigned int i;
237
238 /*
239 * The first 12 mailboxes are used as a reception FIFO. The
240 * last mailbox is configured with overwrite option. The
241 * overwrite flag indicates a FIFO overflow.
242 */
243 for (i = AT91_MB_RX_FIRST; i < AT91_MB_RX_LAST; i++)
244 set_mb_mode(priv, i, AT91_MB_MODE_RX);
245 set_mb_mode(priv, AT91_MB_RX_LAST, AT91_MB_MODE_RX_OVRWR);
246
247 /* The last 4 mailboxes are used for transmitting. */
248 for (i = AT91_MB_TX_FIRST; i <= AT91_MB_TX_LAST; i++)
249 set_mb_mode_prio(priv, i, AT91_MB_MODE_TX, 0);
250
251 /* Reset tx and rx helper pointers */
252 priv->tx_next = priv->tx_echo = priv->rx_next = 0;
253}
254
255static int at91_set_bittiming(struct net_device *dev)
256{
257 const struct at91_priv *priv = netdev_priv(dev);
258 const struct can_bittiming *bt = &priv->can.bittiming;
259 u32 reg_br;
260
261 reg_br = ((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) << 24) |
262 ((bt->brp - 1) << 16) | ((bt->sjw - 1) << 12) |
263 ((bt->prop_seg - 1) << 8) | ((bt->phase_seg1 - 1) << 4) |
264 ((bt->phase_seg2 - 1) << 0);
265
266 dev_info(dev->dev.parent, "writing AT91_BR: 0x%08x\n", reg_br);
267
268 at91_write(priv, AT91_BR, reg_br);
269
270 return 0;
271}
272
273static void at91_chip_start(struct net_device *dev)
274{
275 struct at91_priv *priv = netdev_priv(dev);
276 u32 reg_mr, reg_ier;
277
278 /* disable interrupts */
279 at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
280
281 /* disable chip */
282 reg_mr = at91_read(priv, AT91_MR);
283 at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN);
284
285 at91_setup_mailboxes(dev);
286 at91_transceiver_switch(priv, 1);
287
288 /* enable chip */
289 at91_write(priv, AT91_MR, AT91_MR_CANEN);
290
291 priv->can.state = CAN_STATE_ERROR_ACTIVE;
292
293 /* Enable interrupts */
294 reg_ier = AT91_IRQ_MB_RX | AT91_IRQ_ERRP | AT91_IRQ_ERR_FRAME;
295 at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
296 at91_write(priv, AT91_IER, reg_ier);
297}
298
299static void at91_chip_stop(struct net_device *dev, enum can_state state)
300{
301 struct at91_priv *priv = netdev_priv(dev);
302 u32 reg_mr;
303
304 /* disable interrupts */
305 at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
306
307 reg_mr = at91_read(priv, AT91_MR);
308 at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN);
309
310 at91_transceiver_switch(priv, 0);
311 priv->can.state = state;
312}
313
314/*
315 * theory of operation:
316 *
317 * According to the datasheet priority 0 is the highest priority, 15
318 * is the lowest. If two mailboxes have the same priority level the
319 * message of the mailbox with the lowest number is sent first.
320 *
321 * We use the first TX mailbox (AT91_MB_TX_FIRST) with prio 0, then
322 * the next mailbox with prio 0, and so on, until all mailboxes are
323 * used. Then we start from the beginning with mailbox
324 * AT91_MB_TX_FIRST, but with prio 1, mailbox AT91_MB_TX_FIRST + 1
325 * prio 1. When we reach the last mailbox with prio 15, we have to
326 * stop sending, waiting for all messages to be delivered, then start
327 * again with mailbox AT91_MB_TX_FIRST prio 0.
328 *
329 * We use the priv->tx_next as counter for the next transmission
330 * mailbox, but without the offset AT91_MB_TX_FIRST. The lower bits
331 * encode the mailbox number, the upper 4 bits the mailbox priority:
332 *
333 * priv->tx_next = (prio << AT91_NEXT_PRIO_SHIFT) ||
334 * (mb - AT91_MB_TX_FIRST);
335 *
336 */
337static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev)
338{
339 struct at91_priv *priv = netdev_priv(dev);
340 struct net_device_stats *stats = &dev->stats;
341 struct can_frame *cf = (struct can_frame *)skb->data;
342 unsigned int mb, prio;
343 u32 reg_mid, reg_mcr;
344
Oliver Hartkopp3ccd4c62010-01-12 02:00:46 -0800345 if (can_dropped_invalid_skb(dev, skb))
346 return NETDEV_TX_OK;
347
David S. Miller99c4a632009-09-25 12:14:43 -0700348 mb = get_tx_next_mb(priv);
349 prio = get_tx_next_prio(priv);
350
351 if (unlikely(!(at91_read(priv, AT91_MSR(mb)) & AT91_MSR_MRDY))) {
352 netif_stop_queue(dev);
353
354 dev_err(dev->dev.parent,
355 "BUG! TX buffer full when queue awake!\n");
356 return NETDEV_TX_BUSY;
357 }
358
359 if (cf->can_id & CAN_EFF_FLAG)
360 reg_mid = (cf->can_id & CAN_EFF_MASK) | AT91_MID_MIDE;
361 else
362 reg_mid = (cf->can_id & CAN_SFF_MASK) << 18;
363
364 reg_mcr = ((cf->can_id & CAN_RTR_FLAG) ? AT91_MCR_MRTR : 0) |
365 (cf->can_dlc << 16) | AT91_MCR_MTCR;
366
367 /* disable MB while writing ID (see datasheet) */
368 set_mb_mode(priv, mb, AT91_MB_MODE_DISABLED);
369 at91_write(priv, AT91_MID(mb), reg_mid);
370 set_mb_mode_prio(priv, mb, AT91_MB_MODE_TX, prio);
371
372 at91_write(priv, AT91_MDL(mb), *(u32 *)(cf->data + 0));
373 at91_write(priv, AT91_MDH(mb), *(u32 *)(cf->data + 4));
374
375 /* This triggers transmission */
376 at91_write(priv, AT91_MCR(mb), reg_mcr);
377
378 stats->tx_bytes += cf->can_dlc;
379 dev->trans_start = jiffies;
380
381 /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
382 can_put_echo_skb(skb, dev, mb - AT91_MB_TX_FIRST);
383
384 /*
385 * we have to stop the queue and deliver all messages in case
386 * of a prio+mb counter wrap around. This is the case if
387 * tx_next buffer prio and mailbox equals 0.
388 *
389 * also stop the queue if next buffer is still in use
390 * (== not ready)
391 */
392 priv->tx_next++;
393 if (!(at91_read(priv, AT91_MSR(get_tx_next_mb(priv))) &
394 AT91_MSR_MRDY) ||
395 (priv->tx_next & AT91_NEXT_MASK) == 0)
396 netif_stop_queue(dev);
397
398 /* Enable interrupt for this mailbox */
399 at91_write(priv, AT91_IER, 1 << mb);
400
401 return NETDEV_TX_OK;
402}
403
404/**
405 * at91_activate_rx_low - activate lower rx mailboxes
406 * @priv: a91 context
407 *
408 * Reenables the lower mailboxes for reception of new CAN messages
409 */
410static inline void at91_activate_rx_low(const struct at91_priv *priv)
411{
412 u32 mask = AT91_MB_RX_LOW_MASK;
413 at91_write(priv, AT91_TCR, mask);
414}
415
416/**
417 * at91_activate_rx_mb - reactive single rx mailbox
418 * @priv: a91 context
419 * @mb: mailbox to reactivate
420 *
421 * Reenables given mailbox for reception of new CAN messages
422 */
423static inline void at91_activate_rx_mb(const struct at91_priv *priv,
424 unsigned int mb)
425{
426 u32 mask = 1 << mb;
427 at91_write(priv, AT91_TCR, mask);
428}
429
430/**
431 * at91_rx_overflow_err - send error frame due to rx overflow
432 * @dev: net device
433 */
434static void at91_rx_overflow_err(struct net_device *dev)
435{
436 struct net_device_stats *stats = &dev->stats;
437 struct sk_buff *skb;
438 struct can_frame *cf;
439
440 dev_dbg(dev->dev.parent, "RX buffer overflow\n");
441 stats->rx_over_errors++;
442 stats->rx_errors++;
443
444 skb = alloc_can_err_skb(dev, &cf);
445 if (unlikely(!skb))
446 return;
447
448 cf->can_id |= CAN_ERR_CRTL;
449 cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
450 netif_receive_skb(skb);
451
452 stats->rx_packets++;
453 stats->rx_bytes += cf->can_dlc;
454}
455
456/**
457 * at91_read_mb - read CAN msg from mailbox (lowlevel impl)
458 * @dev: net device
459 * @mb: mailbox number to read from
460 * @cf: can frame where to store message
461 *
462 * Reads a CAN message from the given mailbox and stores data into
463 * given can frame. "mb" and "cf" must be valid.
464 */
465static void at91_read_mb(struct net_device *dev, unsigned int mb,
466 struct can_frame *cf)
467{
468 const struct at91_priv *priv = netdev_priv(dev);
469 u32 reg_msr, reg_mid;
470
471 reg_mid = at91_read(priv, AT91_MID(mb));
472 if (reg_mid & AT91_MID_MIDE)
473 cf->can_id = ((reg_mid >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
474 else
475 cf->can_id = (reg_mid >> 18) & CAN_SFF_MASK;
476
477 reg_msr = at91_read(priv, AT91_MSR(mb));
478 if (reg_msr & AT91_MSR_MRTR)
479 cf->can_id |= CAN_RTR_FLAG;
Oliver Hartkoppc7cd6062009-12-12 04:13:21 +0000480 cf->can_dlc = get_can_dlc((reg_msr >> 16) & 0xf);
David S. Miller99c4a632009-09-25 12:14:43 -0700481
482 *(u32 *)(cf->data + 0) = at91_read(priv, AT91_MDL(mb));
483 *(u32 *)(cf->data + 4) = at91_read(priv, AT91_MDH(mb));
484
485 if (unlikely(mb == AT91_MB_RX_LAST && reg_msr & AT91_MSR_MMI))
486 at91_rx_overflow_err(dev);
487}
488
489/**
490 * at91_read_msg - read CAN message from mailbox
491 * @dev: net device
492 * @mb: mail box to read from
493 *
494 * Reads a CAN message from given mailbox, and put into linux network
495 * RX queue, does all housekeeping chores (stats, ...)
496 */
497static void at91_read_msg(struct net_device *dev, unsigned int mb)
498{
499 struct net_device_stats *stats = &dev->stats;
500 struct can_frame *cf;
501 struct sk_buff *skb;
502
503 skb = alloc_can_skb(dev, &cf);
504 if (unlikely(!skb)) {
505 stats->rx_dropped++;
506 return;
507 }
508
509 at91_read_mb(dev, mb, cf);
510 netif_receive_skb(skb);
511
512 stats->rx_packets++;
513 stats->rx_bytes += cf->can_dlc;
514}
515
516/**
517 * at91_poll_rx - read multiple CAN messages from mailboxes
518 * @dev: net device
519 * @quota: max number of pkgs we're allowed to receive
520 *
521 * Theory of Operation:
522 *
523 * 12 of the 16 mailboxes on the chip are reserved for RX. we split
524 * them into 2 groups. The lower group holds 8 and upper 4 mailboxes.
525 *
526 * Like it or not, but the chip always saves a received CAN message
527 * into the first free mailbox it finds (starting with the
528 * lowest). This makes it very difficult to read the messages in the
529 * right order from the chip. This is how we work around that problem:
530 *
531 * The first message goes into mb nr. 0 and issues an interrupt. All
532 * rx ints are disabled in the interrupt handler and a napi poll is
533 * scheduled. We read the mailbox, but do _not_ reenable the mb (to
534 * receive another message).
535 *
536 * lower mbxs upper
537 * ______^______ __^__
538 * / \ / \
539 * +-+-+-+-+-+-+-+-++-+-+-+-+
540 * |x|x|x|x|x|x|x|x|| | | | |
541 * +-+-+-+-+-+-+-+-++-+-+-+-+
542 * 0 0 0 0 0 0 0 0 0 0 1 1 \ mail
543 * 0 1 2 3 4 5 6 7 8 9 0 1 / box
544 *
545 * The variable priv->rx_next points to the next mailbox to read a
546 * message from. As long we're in the lower mailboxes we just read the
547 * mailbox but not reenable it.
548 *
549 * With completion of the last of the lower mailboxes, we reenable the
550 * whole first group, but continue to look for filled mailboxes in the
551 * upper mailboxes. Imagine the second group like overflow mailboxes,
552 * which takes CAN messages if the lower goup is full. While in the
553 * upper group we reenable the mailbox right after reading it. Giving
554 * the chip more room to store messages.
555 *
556 * After finishing we look again in the lower group if we've still
557 * quota.
558 *
559 */
560static int at91_poll_rx(struct net_device *dev, int quota)
561{
562 struct at91_priv *priv = netdev_priv(dev);
563 u32 reg_sr = at91_read(priv, AT91_SR);
564 const unsigned long *addr = (unsigned long *)&reg_sr;
565 unsigned int mb;
566 int received = 0;
567
568 if (priv->rx_next > AT91_MB_RX_LOW_LAST &&
569 reg_sr & AT91_MB_RX_LOW_MASK)
570 dev_info(dev->dev.parent,
571 "order of incoming frames cannot be guaranteed\n");
572
573 again:
574 for (mb = find_next_bit(addr, AT91_MB_RX_NUM, priv->rx_next);
575 mb < AT91_MB_RX_NUM && quota > 0;
576 reg_sr = at91_read(priv, AT91_SR),
577 mb = find_next_bit(addr, AT91_MB_RX_NUM, ++priv->rx_next)) {
578 at91_read_msg(dev, mb);
579
580 /* reactivate mailboxes */
581 if (mb == AT91_MB_RX_LOW_LAST)
582 /* all lower mailboxed, if just finished it */
583 at91_activate_rx_low(priv);
584 else if (mb > AT91_MB_RX_LOW_LAST)
585 /* only the mailbox we read */
586 at91_activate_rx_mb(priv, mb);
587
588 received++;
589 quota--;
590 }
591
592 /* upper group completed, look again in lower */
593 if (priv->rx_next > AT91_MB_RX_LOW_LAST &&
594 quota > 0 && mb >= AT91_MB_RX_NUM) {
595 priv->rx_next = 0;
596 goto again;
597 }
598
599 return received;
600}
601
602static void at91_poll_err_frame(struct net_device *dev,
603 struct can_frame *cf, u32 reg_sr)
604{
605 struct at91_priv *priv = netdev_priv(dev);
606
607 /* CRC error */
608 if (reg_sr & AT91_IRQ_CERR) {
609 dev_dbg(dev->dev.parent, "CERR irq\n");
610 dev->stats.rx_errors++;
611 priv->can.can_stats.bus_error++;
612 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
613 }
614
615 /* Stuffing Error */
616 if (reg_sr & AT91_IRQ_SERR) {
617 dev_dbg(dev->dev.parent, "SERR irq\n");
618 dev->stats.rx_errors++;
619 priv->can.can_stats.bus_error++;
620 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
621 cf->data[2] |= CAN_ERR_PROT_STUFF;
622 }
623
624 /* Acknowledgement Error */
625 if (reg_sr & AT91_IRQ_AERR) {
626 dev_dbg(dev->dev.parent, "AERR irq\n");
627 dev->stats.tx_errors++;
628 cf->can_id |= CAN_ERR_ACK;
629 }
630
631 /* Form error */
632 if (reg_sr & AT91_IRQ_FERR) {
633 dev_dbg(dev->dev.parent, "FERR irq\n");
634 dev->stats.rx_errors++;
635 priv->can.can_stats.bus_error++;
636 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
637 cf->data[2] |= CAN_ERR_PROT_FORM;
638 }
639
640 /* Bit Error */
641 if (reg_sr & AT91_IRQ_BERR) {
642 dev_dbg(dev->dev.parent, "BERR irq\n");
643 dev->stats.tx_errors++;
644 priv->can.can_stats.bus_error++;
645 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
646 cf->data[2] |= CAN_ERR_PROT_BIT;
647 }
648}
649
650static int at91_poll_err(struct net_device *dev, int quota, u32 reg_sr)
651{
652 struct sk_buff *skb;
653 struct can_frame *cf;
654
655 if (quota == 0)
656 return 0;
657
658 skb = alloc_can_err_skb(dev, &cf);
659 if (unlikely(!skb))
660 return 0;
661
662 at91_poll_err_frame(dev, cf, reg_sr);
663 netif_receive_skb(skb);
664
665 dev->last_rx = jiffies;
666 dev->stats.rx_packets++;
667 dev->stats.rx_bytes += cf->can_dlc;
668
669 return 1;
670}
671
672static int at91_poll(struct napi_struct *napi, int quota)
673{
674 struct net_device *dev = napi->dev;
675 const struct at91_priv *priv = netdev_priv(dev);
676 u32 reg_sr = at91_read(priv, AT91_SR);
677 int work_done = 0;
678
679 if (reg_sr & AT91_IRQ_MB_RX)
680 work_done += at91_poll_rx(dev, quota - work_done);
681
682 /*
683 * The error bits are clear on read,
684 * so use saved value from irq handler.
685 */
686 reg_sr |= priv->reg_sr;
687 if (reg_sr & AT91_IRQ_ERR_FRAME)
688 work_done += at91_poll_err(dev, quota - work_done, reg_sr);
689
690 if (work_done < quota) {
691 /* enable IRQs for frame errors and all mailboxes >= rx_next */
692 u32 reg_ier = AT91_IRQ_ERR_FRAME;
693 reg_ier |= AT91_IRQ_MB_RX & ~AT91_MB_RX_MASK(priv->rx_next);
694
695 napi_complete(napi);
696 at91_write(priv, AT91_IER, reg_ier);
697 }
698
699 return work_done;
700}
701
702/*
703 * theory of operation:
704 *
705 * priv->tx_echo holds the number of the oldest can_frame put for
706 * transmission into the hardware, but not yet ACKed by the CAN tx
707 * complete IRQ.
708 *
709 * We iterate from priv->tx_echo to priv->tx_next and check if the
710 * packet has been transmitted, echo it back to the CAN framework. If
711 * we discover a not yet transmitted package, stop looking for more.
712 *
713 */
714static void at91_irq_tx(struct net_device *dev, u32 reg_sr)
715{
716 struct at91_priv *priv = netdev_priv(dev);
717 u32 reg_msr;
718 unsigned int mb;
719
720 /* masking of reg_sr not needed, already done by at91_irq */
721
722 for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
723 mb = get_tx_echo_mb(priv);
724
725 /* no event in mailbox? */
726 if (!(reg_sr & (1 << mb)))
727 break;
728
729 /* Disable irq for this TX mailbox */
730 at91_write(priv, AT91_IDR, 1 << mb);
731
732 /*
733 * only echo if mailbox signals us a transfer
734 * complete (MSR_MRDY). Otherwise it's a tansfer
735 * abort. "can_bus_off()" takes care about the skbs
736 * parked in the echo queue.
737 */
738 reg_msr = at91_read(priv, AT91_MSR(mb));
739 if (likely(reg_msr & AT91_MSR_MRDY &&
740 ~reg_msr & AT91_MSR_MABT)) {
741 /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
742 can_get_echo_skb(dev, mb - AT91_MB_TX_FIRST);
743 dev->stats.tx_packets++;
744 }
745 }
746
747 /*
748 * restart queue if we don't have a wrap around but restart if
749 * we get a TX int for the last can frame directly before a
750 * wrap around.
751 */
752 if ((priv->tx_next & AT91_NEXT_MASK) != 0 ||
753 (priv->tx_echo & AT91_NEXT_MASK) == 0)
754 netif_wake_queue(dev);
755}
756
757static void at91_irq_err_state(struct net_device *dev,
758 struct can_frame *cf, enum can_state new_state)
759{
760 struct at91_priv *priv = netdev_priv(dev);
761 u32 reg_idr, reg_ier, reg_ecr;
762 u8 tec, rec;
763
764 reg_ecr = at91_read(priv, AT91_ECR);
765 rec = reg_ecr & 0xff;
766 tec = reg_ecr >> 16;
767
768 switch (priv->can.state) {
769 case CAN_STATE_ERROR_ACTIVE:
770 /*
771 * from: ERROR_ACTIVE
772 * to : ERROR_WARNING, ERROR_PASSIVE, BUS_OFF
773 * => : there was a warning int
774 */
775 if (new_state >= CAN_STATE_ERROR_WARNING &&
776 new_state <= CAN_STATE_BUS_OFF) {
777 dev_dbg(dev->dev.parent, "Error Warning IRQ\n");
778 priv->can.can_stats.error_warning++;
779
780 cf->can_id |= CAN_ERR_CRTL;
781 cf->data[1] = (tec > rec) ?
782 CAN_ERR_CRTL_TX_WARNING :
783 CAN_ERR_CRTL_RX_WARNING;
784 }
785 case CAN_STATE_ERROR_WARNING: /* fallthrough */
786 /*
787 * from: ERROR_ACTIVE, ERROR_WARNING
788 * to : ERROR_PASSIVE, BUS_OFF
789 * => : error passive int
790 */
791 if (new_state >= CAN_STATE_ERROR_PASSIVE &&
792 new_state <= CAN_STATE_BUS_OFF) {
793 dev_dbg(dev->dev.parent, "Error Passive IRQ\n");
794 priv->can.can_stats.error_passive++;
795
796 cf->can_id |= CAN_ERR_CRTL;
797 cf->data[1] = (tec > rec) ?
798 CAN_ERR_CRTL_TX_PASSIVE :
799 CAN_ERR_CRTL_RX_PASSIVE;
800 }
801 break;
802 case CAN_STATE_BUS_OFF:
803 /*
804 * from: BUS_OFF
805 * to : ERROR_ACTIVE, ERROR_WARNING, ERROR_PASSIVE
806 */
807 if (new_state <= CAN_STATE_ERROR_PASSIVE) {
808 cf->can_id |= CAN_ERR_RESTARTED;
809
810 dev_dbg(dev->dev.parent, "restarted\n");
811 priv->can.can_stats.restarts++;
812
813 netif_carrier_on(dev);
814 netif_wake_queue(dev);
815 }
816 break;
817 default:
818 break;
819 }
820
821
822 /* process state changes depending on the new state */
823 switch (new_state) {
824 case CAN_STATE_ERROR_ACTIVE:
825 /*
826 * actually we want to enable AT91_IRQ_WARN here, but
827 * it screws up the system under certain
828 * circumstances. so just enable AT91_IRQ_ERRP, thus
829 * the "fallthrough"
830 */
831 dev_dbg(dev->dev.parent, "Error Active\n");
832 cf->can_id |= CAN_ERR_PROT;
833 cf->data[2] = CAN_ERR_PROT_ACTIVE;
834 case CAN_STATE_ERROR_WARNING: /* fallthrough */
835 reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_BOFF;
836 reg_ier = AT91_IRQ_ERRP;
837 break;
838 case CAN_STATE_ERROR_PASSIVE:
839 reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_ERRP;
840 reg_ier = AT91_IRQ_BOFF;
841 break;
842 case CAN_STATE_BUS_OFF:
843 reg_idr = AT91_IRQ_ERRA | AT91_IRQ_ERRP |
844 AT91_IRQ_WARN | AT91_IRQ_BOFF;
845 reg_ier = 0;
846
847 cf->can_id |= CAN_ERR_BUSOFF;
848
849 dev_dbg(dev->dev.parent, "bus-off\n");
850 netif_carrier_off(dev);
851 priv->can.can_stats.bus_off++;
852
853 /* turn off chip, if restart is disabled */
854 if (!priv->can.restart_ms) {
855 at91_chip_stop(dev, CAN_STATE_BUS_OFF);
856 return;
857 }
858 break;
859 default:
860 break;
861 }
862
863 at91_write(priv, AT91_IDR, reg_idr);
864 at91_write(priv, AT91_IER, reg_ier);
865}
866
867static void at91_irq_err(struct net_device *dev)
868{
869 struct at91_priv *priv = netdev_priv(dev);
870 struct sk_buff *skb;
871 struct can_frame *cf;
872 enum can_state new_state;
873 u32 reg_sr;
874
875 reg_sr = at91_read(priv, AT91_SR);
876
877 /* we need to look at the unmasked reg_sr */
878 if (unlikely(reg_sr & AT91_IRQ_BOFF))
879 new_state = CAN_STATE_BUS_OFF;
880 else if (unlikely(reg_sr & AT91_IRQ_ERRP))
881 new_state = CAN_STATE_ERROR_PASSIVE;
882 else if (unlikely(reg_sr & AT91_IRQ_WARN))
883 new_state = CAN_STATE_ERROR_WARNING;
884 else if (likely(reg_sr & AT91_IRQ_ERRA))
885 new_state = CAN_STATE_ERROR_ACTIVE;
886 else {
887 dev_err(dev->dev.parent, "BUG! hardware in undefined state\n");
888 return;
889 }
890
891 /* state hasn't changed */
892 if (likely(new_state == priv->can.state))
893 return;
894
895 skb = alloc_can_err_skb(dev, &cf);
896 if (unlikely(!skb))
897 return;
898
899 at91_irq_err_state(dev, cf, new_state);
900 netif_rx(skb);
901
902 dev->last_rx = jiffies;
903 dev->stats.rx_packets++;
904 dev->stats.rx_bytes += cf->can_dlc;
905
906 priv->can.state = new_state;
907}
908
909/*
910 * interrupt handler
911 */
912static irqreturn_t at91_irq(int irq, void *dev_id)
913{
914 struct net_device *dev = dev_id;
915 struct at91_priv *priv = netdev_priv(dev);
916 irqreturn_t handled = IRQ_NONE;
917 u32 reg_sr, reg_imr;
918
919 reg_sr = at91_read(priv, AT91_SR);
920 reg_imr = at91_read(priv, AT91_IMR);
921
922 /* Ignore masked interrupts */
923 reg_sr &= reg_imr;
924 if (!reg_sr)
925 goto exit;
926
927 handled = IRQ_HANDLED;
928
929 /* Receive or error interrupt? -> napi */
930 if (reg_sr & (AT91_IRQ_MB_RX | AT91_IRQ_ERR_FRAME)) {
931 /*
932 * The error bits are clear on read,
933 * save for later use.
934 */
935 priv->reg_sr = reg_sr;
936 at91_write(priv, AT91_IDR,
937 AT91_IRQ_MB_RX | AT91_IRQ_ERR_FRAME);
938 napi_schedule(&priv->napi);
939 }
940
941 /* Transmission complete interrupt */
942 if (reg_sr & AT91_IRQ_MB_TX)
943 at91_irq_tx(dev, reg_sr);
944
945 at91_irq_err(dev);
946
947 exit:
948 return handled;
949}
950
951static int at91_open(struct net_device *dev)
952{
953 struct at91_priv *priv = netdev_priv(dev);
954 int err;
955
956 clk_enable(priv->clk);
957
958 /* check or determine and set bittime */
959 err = open_candev(dev);
960 if (err)
961 goto out;
962
963 /* register interrupt handler */
964 if (request_irq(dev->irq, at91_irq, IRQF_SHARED,
965 dev->name, dev)) {
966 err = -EAGAIN;
967 goto out_close;
968 }
969
970 /* start chip and queuing */
971 at91_chip_start(dev);
972 napi_enable(&priv->napi);
973 netif_start_queue(dev);
974
975 return 0;
976
977 out_close:
978 close_candev(dev);
979 out:
980 clk_disable(priv->clk);
981
982 return err;
983}
984
985/*
986 * stop CAN bus activity
987 */
988static int at91_close(struct net_device *dev)
989{
990 struct at91_priv *priv = netdev_priv(dev);
991
992 netif_stop_queue(dev);
993 napi_disable(&priv->napi);
994 at91_chip_stop(dev, CAN_STATE_STOPPED);
995
996 free_irq(dev->irq, dev);
997 clk_disable(priv->clk);
998
999 close_candev(dev);
1000
1001 return 0;
1002}
1003
1004static int at91_set_mode(struct net_device *dev, enum can_mode mode)
1005{
1006 switch (mode) {
1007 case CAN_MODE_START:
1008 at91_chip_start(dev);
1009 netif_wake_queue(dev);
1010 break;
1011
1012 default:
1013 return -EOPNOTSUPP;
1014 }
1015
1016 return 0;
1017}
1018
1019static const struct net_device_ops at91_netdev_ops = {
1020 .ndo_open = at91_open,
1021 .ndo_stop = at91_close,
1022 .ndo_start_xmit = at91_start_xmit,
1023};
1024
1025static int __init at91_can_probe(struct platform_device *pdev)
1026{
1027 struct net_device *dev;
1028 struct at91_priv *priv;
1029 struct resource *res;
1030 struct clk *clk;
1031 void __iomem *addr;
1032 int err, irq;
1033
1034 clk = clk_get(&pdev->dev, "can_clk");
1035 if (IS_ERR(clk)) {
1036 dev_err(&pdev->dev, "no clock defined\n");
1037 err = -ENODEV;
1038 goto exit;
1039 }
1040
1041 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1042 irq = platform_get_irq(pdev, 0);
Uwe Kleine-König4773a472009-12-18 20:31:56 -08001043 if (!res || irq <= 0) {
David S. Miller99c4a632009-09-25 12:14:43 -07001044 err = -ENODEV;
1045 goto exit_put;
1046 }
1047
1048 if (!request_mem_region(res->start,
1049 resource_size(res),
1050 pdev->name)) {
1051 err = -EBUSY;
1052 goto exit_put;
1053 }
1054
1055 addr = ioremap_nocache(res->start, resource_size(res));
1056 if (!addr) {
1057 err = -ENOMEM;
1058 goto exit_release;
1059 }
1060
Wolfgang Grandeggera6e4bc52009-10-08 22:17:11 +00001061 dev = alloc_candev(sizeof(struct at91_priv), AT91_MB_TX_NUM);
David S. Miller99c4a632009-09-25 12:14:43 -07001062 if (!dev) {
1063 err = -ENOMEM;
1064 goto exit_iounmap;
1065 }
1066
1067 dev->netdev_ops = &at91_netdev_ops;
1068 dev->irq = irq;
1069 dev->flags |= IFF_ECHO;
1070
1071 priv = netdev_priv(dev);
1072 priv->can.clock.freq = clk_get_rate(clk);
1073 priv->can.bittiming_const = &at91_bittiming_const;
1074 priv->can.do_set_bittiming = at91_set_bittiming;
1075 priv->can.do_set_mode = at91_set_mode;
1076 priv->reg_base = addr;
1077 priv->dev = dev;
1078 priv->clk = clk;
1079 priv->pdata = pdev->dev.platform_data;
1080
1081 netif_napi_add(dev, &priv->napi, at91_poll, AT91_NAPI_WEIGHT);
1082
1083 dev_set_drvdata(&pdev->dev, dev);
1084 SET_NETDEV_DEV(dev, &pdev->dev);
1085
1086 err = register_candev(dev);
1087 if (err) {
1088 dev_err(&pdev->dev, "registering netdev failed\n");
1089 goto exit_free;
1090 }
1091
1092 dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n",
1093 priv->reg_base, dev->irq);
1094
1095 return 0;
1096
1097 exit_free:
1098 free_netdev(dev);
1099 exit_iounmap:
1100 iounmap(addr);
1101 exit_release:
1102 release_mem_region(res->start, resource_size(res));
1103 exit_put:
1104 clk_put(clk);
1105 exit:
1106 return err;
1107}
1108
1109static int __devexit at91_can_remove(struct platform_device *pdev)
1110{
1111 struct net_device *dev = platform_get_drvdata(pdev);
1112 struct at91_priv *priv = netdev_priv(dev);
1113 struct resource *res;
1114
1115 unregister_netdev(dev);
1116
1117 platform_set_drvdata(pdev, NULL);
1118
1119 free_netdev(dev);
1120
1121 iounmap(priv->reg_base);
1122
1123 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1124 release_mem_region(res->start, resource_size(res));
1125
1126 clk_put(priv->clk);
1127
1128 return 0;
1129}
1130
1131static struct platform_driver at91_can_driver = {
1132 .probe = at91_can_probe,
1133 .remove = __devexit_p(at91_can_remove),
1134 .driver = {
1135 .name = DRV_NAME,
1136 .owner = THIS_MODULE,
1137 },
1138};
1139
1140static int __init at91_can_module_init(void)
1141{
1142 printk(KERN_INFO "%s netdevice driver\n", DRV_NAME);
1143 return platform_driver_register(&at91_can_driver);
1144}
1145
1146static void __exit at91_can_module_exit(void)
1147{
1148 platform_driver_unregister(&at91_can_driver);
1149 printk(KERN_INFO "%s: driver removed\n", DRV_NAME);
1150}
1151
1152module_init(at91_can_module_init);
1153module_exit(at91_can_module_exit);
1154
1155MODULE_AUTHOR("Marc Kleine-Budde <mkl@pengutronix.de>");
1156MODULE_LICENSE("GPL v2");
1157MODULE_DESCRIPTION(DRV_NAME " CAN netdevice driver");