blob: dda30e42ec79806b8e2de0d79e365c407befb4eb [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* drivers/char/ser_a2232.c */
2
3/* $Id: ser_a2232.c,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */
4
5/* Linux serial driver for the Amiga A2232 board */
6
7/* This driver is MAINTAINED. Before applying any changes, please contact
8 * the author.
9 */
10
11/* Copyright (c) 2000-2001 Enver Haase <ehaase@inf.fu-berlin.de>
12 * alias The A2232 driver project <A2232@gmx.net>
13 * All rights reserved.
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 *
29 */
30/***************************** Documentation ************************/
31/*
32 * This driver is in EXPERIMENTAL state. That means I could not find
33 * someone with five A2232 boards with 35 ports running at 19200 bps
34 * at the same time and test the machine's behaviour.
35 * However, I know that you can performance-tweak this driver (see
36 * the source code).
37 * One thing to consider is the time this driver consumes during the
38 * Amiga's vertical blank interrupt. Everything that is to be done
39 * _IS DONE_ when entering the vertical blank interrupt handler of
40 * this driver.
41 * However, it would be more sane to only do the job for only ONE card
42 * instead of ALL cards at a time; or, more generally, to handle only
43 * SOME ports instead of ALL ports at a time.
44 * However, as long as no-one runs into problems I guess I shouldn't
45 * change the driver as it runs fine for me :) .
46 *
47 * Version history of this file:
48 * 0.4 Resolved licensing issues.
49 * 0.3 Inclusion in the Linux/m68k tree, small fixes.
50 * 0.2 Added documentation, minor typo fixes.
51 * 0.1 Initial release.
52 *
53 * TO DO:
54 * - Handle incoming BREAK events. I guess "Stevens: Advanced
55 * Programming in the UNIX(R) Environment" is a good reference
56 * on what is to be done.
57 * - When installing as a module, don't simply 'printk' text, but
58 * send it to the TTY used by the user.
59 *
60 * THANKS TO:
61 * - Jukka Marin (65EC02 code).
62 * - The other NetBSD developers on whose A2232 driver I had a
63 * pretty close look. However, I didn't copy any code so it
64 * is okay to put my code under the GPL and include it into
65 * Linux.
66 */
67/***************************** End of Documentation *****************/
68
69/***************************** Defines ******************************/
70/*
71 * Enables experimental 115200 (normal) 230400 (turbo) baud rate.
72 * The A2232 specification states it can only operate at speeds up to
73 * 19200 bits per second, and I was not able to send a file via
74 * "sz"/"rz" and a null-modem cable from one A2232 port to another
75 * at 115200 bits per second.
76 * However, this might work for you.
77 */
78#undef A2232_SPEEDHACK
79/*
80 * Default is not to use RTS/CTS so you could be talked to death.
81 */
82#define A2232_SUPPRESS_RTSCTS_WARNING
83/************************* End of Defines ***************************/
84
85/***************************** Includes *****************************/
86#include <linux/module.h>
87
88#include <linux/types.h>
89#include <linux/sched.h>
90#include <linux/interrupt.h>
91#include <linux/kernel.h>
92#include <linux/errno.h>
93#include <linux/tty.h>
94
95#include <asm/setup.h>
96#include <asm/amigaints.h>
97#include <asm/amigahw.h>
98#include <linux/zorro.h>
99#include <asm/irq.h>
100#include <asm/semaphore.h>
101
102#include <linux/delay.h>
103
104#include <linux/serial.h>
105#include <linux/generic_serial.h>
106
107#include "ser_a2232.h"
108#include "ser_a2232fw.h"
109/************************* End of Includes **************************/
110
111/***************************** Prototypes ***************************/
112/* The interrupt service routine */
113static irqreturn_t a2232_vbl_inter(int irq, void *data, struct pt_regs *fp);
114/* Initialize the port structures */
115static void a2232_init_portstructs(void);
116/* Initialize and register TTY drivers. */
117/* returns 0 IFF successful */
118static int a2232_init_drivers(void);
119
120/* BEGIN GENERIC_SERIAL PROTOTYPES */
121static void a2232_disable_tx_interrupts(void *ptr);
122static void a2232_enable_tx_interrupts(void *ptr);
123static void a2232_disable_rx_interrupts(void *ptr);
124static void a2232_enable_rx_interrupts(void *ptr);
125static int a2232_get_CD(void *ptr);
126static void a2232_shutdown_port(void *ptr);
127static int a2232_set_real_termios(void *ptr);
128static int a2232_chars_in_buffer(void *ptr);
129static void a2232_close(void *ptr);
130static void a2232_hungup(void *ptr);
131/* static void a2232_getserial (void *ptr, struct serial_struct *sp); */
132/* END GENERIC_SERIAL PROTOTYPES */
133
134/* Functions that the TTY driver struct expects */
135static int a2232_ioctl(struct tty_struct *tty, struct file *file,
136 unsigned int cmd, unsigned long arg);
137static void a2232_throttle(struct tty_struct *tty);
138static void a2232_unthrottle(struct tty_struct *tty);
139static int a2232_open(struct tty_struct * tty, struct file * filp);
140/************************* End of Prototypes ************************/
141
142/***************************** Global variables *********************/
143/*---------------------------------------------------------------------------
144 * Interface from generic_serial.c back here
145 *--------------------------------------------------------------------------*/
146static struct real_driver a2232_real_driver = {
147 a2232_disable_tx_interrupts,
148 a2232_enable_tx_interrupts,
149 a2232_disable_rx_interrupts,
150 a2232_enable_rx_interrupts,
151 a2232_get_CD,
152 a2232_shutdown_port,
153 a2232_set_real_termios,
154 a2232_chars_in_buffer,
155 a2232_close,
156 a2232_hungup,
157 NULL /* a2232_getserial */
158};
159
160static void *a2232_driver_ID = &a2232_driver_ID; // Some memory address WE own.
161
162/* Ports structs */
163static struct a2232_port a2232_ports[MAX_A2232_BOARDS*NUMLINES];
164
165/* TTY driver structs */
166static struct tty_driver *a2232_driver;
167
168/* nr of cards completely (all ports) and correctly configured */
169static int nr_a2232;
170
171/* zorro_dev structs for the A2232's */
172static struct zorro_dev *zd_a2232[MAX_A2232_BOARDS];
173/***************************** End of Global variables **************/
174
175/* Helper functions */
176
177static inline volatile struct a2232memory *a2232mem(unsigned int board)
178{
179 return (volatile struct a2232memory *)ZTWO_VADDR(zd_a2232[board]->resource.start);
180}
181
182static inline volatile struct a2232status *a2232stat(unsigned int board,
183 unsigned int portonboard)
184{
185 volatile struct a2232memory *mem = a2232mem(board);
186 return &(mem->Status[portonboard]);
187}
188
189static inline void a2232_receive_char(struct a2232_port *port, int ch, int err)
190{
191/* Mostly stolen from other drivers.
192 Maybe one could implement a more efficient version by not only
193 transferring one character at a time.
194*/
195 struct tty_struct *tty = port->gs.tty;
196
197 if (tty->flip.count >= TTY_FLIPBUF_SIZE)
198 return;
199
200 tty->flip.count++;
201
202#if 0
203 switch(err) {
204 case TTY_BREAK:
205 break;
206 case TTY_PARITY:
207 break;
208 case TTY_OVERRUN:
209 break;
210 case TTY_FRAME:
211 break;
212 }
213#endif
214
215 *tty->flip.flag_buf_ptr++ = err;
216 *tty->flip.char_buf_ptr++ = ch;
217 tty_flip_buffer_push(tty);
218}
219
220/***************************** Functions ****************************/
221/*** BEGIN OF REAL_DRIVER FUNCTIONS ***/
222
223static void a2232_disable_tx_interrupts(void *ptr)
224{
225 struct a2232_port *port;
226 volatile struct a2232status *stat;
227 unsigned long flags;
228
229 port = ptr;
230 stat = a2232stat(port->which_a2232, port->which_port_on_a2232);
231 stat->OutDisable = -1;
232
233 /* Does this here really have to be? */
234 local_irq_save(flags);
235 port->gs.flags &= ~GS_TX_INTEN;
236 local_irq_restore(flags);
237}
238
239static void a2232_enable_tx_interrupts(void *ptr)
240{
241 struct a2232_port *port;
242 volatile struct a2232status *stat;
243 unsigned long flags;
244
245 port = ptr;
246 stat = a2232stat(port->which_a2232, port->which_port_on_a2232);
247 stat->OutDisable = 0;
248
249 /* Does this here really have to be? */
250 local_irq_save(flags);
251 port->gs.flags |= GS_TX_INTEN;
252 local_irq_restore(flags);
253}
254
255static void a2232_disable_rx_interrupts(void *ptr)
256{
257 struct a2232_port *port;
258 port = ptr;
259 port->disable_rx = -1;
260}
261
262static void a2232_enable_rx_interrupts(void *ptr)
263{
264 struct a2232_port *port;
265 port = ptr;
266 port->disable_rx = 0;
267}
268
269static int a2232_get_CD(void *ptr)
270{
271 return ((struct a2232_port *) ptr)->cd_status;
272}
273
274static void a2232_shutdown_port(void *ptr)
275{
276 struct a2232_port *port;
277 volatile struct a2232status *stat;
278 unsigned long flags;
279
280 port = ptr;
281 stat = a2232stat(port->which_a2232, port->which_port_on_a2232);
282
283 local_irq_save(flags);
284
285 port->gs.flags &= ~GS_ACTIVE;
286
287 if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) {
288 /* Set DTR and RTS to Low, flush output.
289 The NetBSD driver "msc.c" does it this way. */
290 stat->Command = ( (stat->Command & ~A2232CMD_CMask) |
291 A2232CMD_Close );
292 stat->OutFlush = -1;
293 stat->Setup = -1;
294 }
295
296 local_irq_restore(flags);
297
298 /* After analyzing control flow, I think a2232_shutdown_port
299 is actually the last call from the system when at application
300 level someone issues a "echo Hello >>/dev/ttyY0".
301 Therefore I think the MOD_DEC_USE_COUNT should be here and
302 not in "a2232_close()". See the comment in "sx.c", too.
303 If you run into problems, compile this driver into the
304 kernel instead of compiling it as a module. */
305}
306
307static int a2232_set_real_termios(void *ptr)
308{
309 unsigned int cflag, baud, chsize, stopb, parity, softflow;
310 int rate;
311 int a2232_param, a2232_cmd;
312 unsigned long flags;
313 unsigned int i;
314 struct a2232_port *port = ptr;
315 volatile struct a2232status *status;
316 volatile struct a2232memory *mem;
317
318 if (!port->gs.tty || !port->gs.tty->termios) return 0;
319
320 status = a2232stat(port->which_a2232, port->which_port_on_a2232);
321 mem = a2232mem(port->which_a2232);
322
323 a2232_param = a2232_cmd = 0;
324
325 // get baud rate
326 baud = port->gs.baud;
327 if (baud == 0) {
328 /* speed == 0 -> drop DTR, do nothing else */
329 local_irq_save(flags);
330 // Clear DTR (and RTS... mhhh).
331 status->Command = ( (status->Command & ~A2232CMD_CMask) |
332 A2232CMD_Close );
333 status->OutFlush = -1;
334 status->Setup = -1;
335
336 local_irq_restore(flags);
337 return 0;
338 }
339
340 rate = A2232_BAUD_TABLE_NOAVAIL;
341 for (i=0; i < A2232_BAUD_TABLE_NUM_RATES * 3; i += 3){
342 if (a2232_baud_table[i] == baud){
343 if (mem->Common.Crystal == A2232_TURBO) rate = a2232_baud_table[i+2];
344 else rate = a2232_baud_table[i+1];
345 }
346 }
347 if (rate == A2232_BAUD_TABLE_NOAVAIL){
348 printk("a2232: Board %d Port %d unsupported baud rate: %d baud. Using another.\n",port->which_a2232,port->which_port_on_a2232,baud);
349 // This is useful for both (turbo or normal) Crystal versions.
350 rate = A2232PARAM_B9600;
351 }
352 a2232_param |= rate;
353
354 cflag = port->gs.tty->termios->c_cflag;
355
356 // get character size
357 chsize = cflag & CSIZE;
358 switch (chsize){
359 case CS8: a2232_param |= A2232PARAM_8Bit; break;
360 case CS7: a2232_param |= A2232PARAM_7Bit; break;
361 case CS6: a2232_param |= A2232PARAM_6Bit; break;
362 case CS5: a2232_param |= A2232PARAM_5Bit; break;
363 default: printk("a2232: Board %d Port %d unsupported character size: %d. Using 8 data bits.\n",
364 port->which_a2232,port->which_port_on_a2232,chsize);
365 a2232_param |= A2232PARAM_8Bit; break;
366 }
367
368 // get number of stop bits
369 stopb = cflag & CSTOPB;
370 if (stopb){ // two stop bits instead of one
371 printk("a2232: Board %d Port %d 2 stop bits unsupported. Using 1 stop bit.\n",
372 port->which_a2232,port->which_port_on_a2232);
373 }
374
375 // Warn if RTS/CTS not wanted
376 if (!(cflag & CRTSCTS)){
377#ifndef A2232_SUPPRESS_RTSCTS_WARNING
378 printk("a2232: Board %d Port %d cannot switch off firmware-implemented RTS/CTS hardware flow control.\n",
379 port->which_a2232,port->which_port_on_a2232);
380#endif
381 }
382
383 /* I think this is correct.
384 However, IXOFF means _input_ flow control and I wonder
385 if one should care about IXON _output_ flow control,
386 too. If this makes problems, one should turn the A2232
387 firmware XON/XOFF "SoftFlow" flow control off and use
388 the conventional way of inserting START/STOP characters
389 by hand in throttle()/unthrottle().
390 */
391 softflow = !!( port->gs.tty->termios->c_iflag & IXOFF );
392
393 // get Parity (Enabled/Disabled? If Enabled, Odd or Even?)
394 parity = cflag & (PARENB | PARODD);
395 if (parity & PARENB){
396 if (parity & PARODD){
397 a2232_cmd |= A2232CMD_OddParity;
398 }
399 else{
400 a2232_cmd |= A2232CMD_EvenParity;
401 }
402 }
403 else a2232_cmd |= A2232CMD_NoParity;
404
405
406 /* Hmm. Maybe an own a2232_port structure
407 member would be cleaner? */
408 if (cflag & CLOCAL)
409 port->gs.flags &= ~ASYNC_CHECK_CD;
410 else
411 port->gs.flags |= ASYNC_CHECK_CD;
412
413
414 /* Now we have all parameters and can go to set them: */
415 local_irq_save(flags);
416
417 status->Param = a2232_param | A2232PARAM_RcvBaud;
418 status->Command = a2232_cmd | A2232CMD_Open | A2232CMD_Enable;
419 status->SoftFlow = softflow;
420 status->OutDisable = 0;
421 status->Setup = -1;
422
423 local_irq_restore(flags);
424 return 0;
425}
426
427static int a2232_chars_in_buffer(void *ptr)
428{
429 struct a2232_port *port;
430 volatile struct a2232status *status;
431 unsigned char ret; /* we need modulo-256 arithmetics */
432 port = ptr;
433 status = a2232stat(port->which_a2232, port->which_port_on_a2232);
434#if A2232_IOBUFLEN != 256
435#error "Re-Implement a2232_chars_in_buffer()!"
436#endif
437 ret = (status->OutHead - status->OutTail);
438 return ret;
439}
440
441static void a2232_close(void *ptr)
442{
443 a2232_disable_tx_interrupts(ptr);
444 a2232_disable_rx_interrupts(ptr);
445 /* see the comment in a2232_shutdown_port above. */
446}
447
448static void a2232_hungup(void *ptr)
449{
450 a2232_close(ptr);
451}
452/*** END OF REAL_DRIVER FUNCTIONS ***/
453
454/*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/
455static int a2232_ioctl( struct tty_struct *tty, struct file *file,
456 unsigned int cmd, unsigned long arg)
457{
458 return -ENOIOCTLCMD;
459}
460
461static void a2232_throttle(struct tty_struct *tty)
462{
463/* Throttle: System cannot take another chars: Drop RTS or
464 send the STOP char or whatever.
465 The A2232 firmware does RTS/CTS anyway, and XON/XOFF
466 if switched on. So the only thing we can do at this
467 layer here is not taking any characters out of the
468 A2232 buffer any more. */
469 struct a2232_port *port = (struct a2232_port *) tty->driver_data;
470 port->throttle_input = -1;
471}
472
473static void a2232_unthrottle(struct tty_struct *tty)
474{
475/* Unthrottle: dual to "throttle()" above. */
476 struct a2232_port *port = (struct a2232_port *) tty->driver_data;
477 port->throttle_input = 0;
478}
479
480static int a2232_open(struct tty_struct * tty, struct file * filp)
481{
482/* More or less stolen from other drivers. */
483 int line;
484 int retval;
485 struct a2232_port *port;
486
487 line = tty->index;
488 port = &a2232_ports[line];
489
490 tty->driver_data = port;
491 port->gs.tty = tty;
492 port->gs.count++;
493 retval = gs_init_port(&port->gs);
494 if (retval) {
495 port->gs.count--;
496 return retval;
497 }
498 port->gs.flags |= GS_ACTIVE;
499 retval = gs_block_til_ready(port, filp);
500
501 if (retval) {
502 port->gs.count--;
503 return retval;
504 }
505
506 a2232_enable_rx_interrupts(port);
507
508 return 0;
509}
510/*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/
511
512static irqreturn_t a2232_vbl_inter(int irq, void *data, struct pt_regs *fp)
513{
514#if A2232_IOBUFLEN != 256
515#error "Re-Implement a2232_vbl_inter()!"
516#endif
517
518struct a2232_port *port;
519volatile struct a2232memory *mem;
520volatile struct a2232status *status;
521unsigned char newhead;
522unsigned char bufpos; /* Must be unsigned char. We need the modulo-256 arithmetics */
523unsigned char ncd, ocd, ccd; /* names consistent with the NetBSD driver */
524volatile u_char *ibuf, *cbuf, *obuf;
525int ch, err, n, p;
526 for (n = 0; n < nr_a2232; n++){ /* for every completely initialized A2232 board */
527 mem = a2232mem(n);
528 for (p = 0; p < NUMLINES; p++){ /* for every port on this board */
529 err = 0;
530 port = &a2232_ports[n*NUMLINES+p];
531 if ( port->gs.flags & GS_ACTIVE ){ /* if the port is used */
532
533 status = a2232stat(n,p);
534
535 if (!port->disable_rx && !port->throttle_input){ /* If input is not disabled */
536 newhead = status->InHead; /* 65EC02 write pointer */
537 bufpos = status->InTail;
538
539 /* check for input for this port */
540 if (newhead != bufpos) {
541 /* buffer for input chars/events */
542 ibuf = mem->InBuf[p];
543
544 /* data types of bytes in ibuf */
545 cbuf = mem->InCtl[p];
546
547 /* do for all chars */
548 while (bufpos != newhead) {
549 /* which type of input data? */
550 switch (cbuf[bufpos]) {
551 /* switch on input event (CD, BREAK, etc.) */
552 case A2232INCTL_EVENT:
553 switch (ibuf[bufpos++]) {
554 case A2232EVENT_Break:
555 /* TODO: Handle BREAK signal */
556 break;
557 /* A2232EVENT_CarrierOn and A2232EVENT_CarrierOff are
558 handled in a separate queue and should not occur here. */
559 case A2232EVENT_Sync:
560 printk("A2232: 65EC02 software sent SYNC event, don't know what to do. Ignoring.");
561 break;
562 default:
563 printk("A2232: 65EC02 software broken, unknown event type %d occurred.\n",ibuf[bufpos-1]);
564 } /* event type switch */
565 break;
566 case A2232INCTL_CHAR:
567 /* Receive incoming char */
568 a2232_receive_char(port, ibuf[bufpos], err);
569 bufpos++;
570 break;
571 default:
572 printk("A2232: 65EC02 software broken, unknown data type %d occurred.\n",cbuf[bufpos]);
573 bufpos++;
574 } /* switch on input data type */
575 } /* while there's something in the buffer */
576
577 status->InTail = bufpos; /* tell 65EC02 what we've read */
578
579 } /* if there was something in the buffer */
580 } /* If input is not disabled */
581
582 /* Now check if there's something to output */
583 obuf = mem->OutBuf[p];
584 bufpos = status->OutHead;
585 while ( (port->gs.xmit_cnt > 0) &&
586 (!port->gs.tty->stopped) &&
587 (!port->gs.tty->hw_stopped) ){ /* While there are chars to transmit */
588 if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */
589 ch = port->gs.xmit_buf[port->gs.xmit_tail]; /* get the next char to transmit */
590 port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */
591 obuf[bufpos++] = ch; /* put it into the A2232 buffer */
592 port->gs.xmit_cnt--;
593 }
594 else{ /* If A2232 the buffer is full */
595 break; /* simply stop filling it. */
596 }
597 }
598 status->OutHead = bufpos;
599
600 /* WakeUp if output buffer runs low */
601 if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) {
602 tty_wakeup(port->gs.tty);
603 }
604 } // if the port is used
605 } // for every port on the board
606
607 /* Now check the CD message queue */
608 newhead = mem->Common.CDHead;
609 bufpos = mem->Common.CDTail;
610 if (newhead != bufpos){ /* There are CD events in queue */
611 ocd = mem->Common.CDStatus; /* get old status bits */
612 while (newhead != bufpos){ /* read all events */
613 ncd = mem->CDBuf[bufpos++]; /* get one event */
614 ccd = ncd ^ ocd; /* mask of changed lines */
615 ocd = ncd; /* save new status bits */
616 for(p=0; p < NUMLINES; p++){ /* for all ports */
617 if (ccd & 1){ /* this one changed */
618
619 struct a2232_port *port = &a2232_ports[n*7+p];
620 port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */
621
622 if (!(port->gs.flags & ASYNC_CHECK_CD))
623 ; /* Don't report DCD changes */
624 else if (port->cd_status) { // if DCD on: DCD went UP!
625
626 /* Are we blocking in open?*/
627 wake_up_interruptible(&port->gs.open_wait);
628 }
629 else { // if DCD off: DCD went DOWN!
630 if (port->gs.tty)
631 tty_hangup (port->gs.tty);
632 }
633
634 } // if CD changed for this port
635 ccd >>= 1;
636 ncd >>= 1; /* Shift bits for next line */
637 } // for every port
638 } // while CD events in queue
639 mem->Common.CDStatus = ocd; /* save new status */
640 mem->Common.CDTail = bufpos; /* remove events */
641 } // if events in CD queue
642
643 } // for every completely initialized A2232 board
644 return IRQ_HANDLED;
645}
646
647static void a2232_init_portstructs(void)
648{
649 struct a2232_port *port;
650 int i;
651
652 for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) {
653 port = a2232_ports + i;
654 port->which_a2232 = i/NUMLINES;
655 port->which_port_on_a2232 = i%NUMLINES;
656 port->disable_rx = port->throttle_input = port->cd_status = 0;
657 port->gs.magic = A2232_MAGIC;
658 port->gs.close_delay = HZ/2;
659 port->gs.closing_wait = 30 * HZ;
660 port->gs.rd = &a2232_real_driver;
661#ifdef NEW_WRITE_LOCKING
662 init_MUTEX(&(port->gs.port_write_sem));
663#endif
664 init_waitqueue_head(&port->gs.open_wait);
665 init_waitqueue_head(&port->gs.close_wait);
666 }
667}
668
669static struct tty_operations a2232_ops = {
670 .open = a2232_open,
671 .close = gs_close,
672 .write = gs_write,
673 .put_char = gs_put_char,
674 .flush_chars = gs_flush_chars,
675 .write_room = gs_write_room,
676 .chars_in_buffer = gs_chars_in_buffer,
677 .flush_buffer = gs_flush_buffer,
678 .ioctl = a2232_ioctl,
679 .throttle = a2232_throttle,
680 .unthrottle = a2232_unthrottle,
681 .set_termios = gs_set_termios,
682 .stop = gs_stop,
683 .start = gs_start,
684 .hangup = gs_hangup,
685};
686
687static int a2232_init_drivers(void)
688{
689 int error;
690
691 a2232_driver = alloc_tty_driver(NUMLINES * nr_a2232);
692 if (!a2232_driver)
693 return -ENOMEM;
694 a2232_driver->owner = THIS_MODULE;
695 a2232_driver->driver_name = "commodore_a2232";
696 a2232_driver->name = "ttyY";
697 a2232_driver->major = A2232_NORMAL_MAJOR;
698 a2232_driver->type = TTY_DRIVER_TYPE_SERIAL;
699 a2232_driver->subtype = SERIAL_TYPE_NORMAL;
700 a2232_driver->init_termios = tty_std_termios;
701 a2232_driver->init_termios.c_cflag =
702 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
703 a2232_driver->flags = TTY_DRIVER_REAL_RAW;
704 tty_set_operations(a2232_driver, &a2232_ops);
705 if ((error = tty_register_driver(a2232_driver))) {
706 printk(KERN_ERR "A2232: Couldn't register A2232 driver, error = %d\n",
707 error);
708 put_tty_driver(a2232_driver);
709 return 1;
710 }
711 return 0;
712}
713
714static int __init a2232board_init(void)
715{
716 struct zorro_dev *z;
717
718 unsigned int boardaddr;
719 int bcount;
720 short start;
721 u_char *from;
722 volatile u_char *to;
723 volatile struct a2232memory *mem;
724
725#ifdef CONFIG_SMP
726 return -ENODEV; /* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */
727#endif
728
729 if (!MACH_IS_AMIGA){
730 return -ENODEV;
731 }
732
733 printk("Commodore A2232 driver initializing.\n"); /* Say that we're alive. */
734
735 z = NULL;
736 nr_a2232 = 0;
737 while ( (z = zorro_find_device(ZORRO_WILDCARD, z)) ){
738 if ( (z->id != ZORRO_PROD_CBM_A2232_PROTOTYPE) &&
739 (z->id != ZORRO_PROD_CBM_A2232) ){
740 continue; // The board found was no A2232
741 }
742 if (!zorro_request_device(z,"A2232 driver"))
743 continue;
744
745 printk("Commodore A2232 found (#%d).\n",nr_a2232);
746
747 zd_a2232[nr_a2232] = z;
748
749 boardaddr = ZTWO_VADDR( z->resource.start );
750 printk("Board is located at address 0x%x, size is 0x%x.\n", boardaddr, (unsigned int) ((z->resource.end+1) - (z->resource.start)));
751
752 mem = (volatile struct a2232memory *) boardaddr;
753
754 (void) mem->Enable6502Reset; /* copy the code across to the board */
755 to = (u_char *)mem; from = a2232_65EC02code; bcount = sizeof(a2232_65EC02code) - 2;
756 start = *(short *)from;
757 from += sizeof(start);
758 to += start;
759 while(bcount--) *to++ = *from++;
760 printk("65EC02 software uploaded to the A2232 memory.\n");
761
762 mem->Common.Crystal = A2232_UNKNOWN; /* use automatic speed check */
763
764 /* start 6502 running */
765 (void) mem->ResetBoard;
766 printk("A2232's 65EC02 CPU up and running.\n");
767
768 /* wait until speed detector has finished */
769 for (bcount = 0; bcount < 2000; bcount++) {
770 udelay(1000);
771 if (mem->Common.Crystal)
772 break;
773 }
774 printk((mem->Common.Crystal?"A2232 oscillator crystal detected by 65EC02 software: ":"65EC02 software could not determine A2232 oscillator crystal: "));
775 switch (mem->Common.Crystal){
776 case A2232_UNKNOWN:
777 printk("Unknown crystal.\n");
778 break;
779 case A2232_NORMAL:
780 printk ("Normal crystal.\n");
781 break;
782 case A2232_TURBO:
783 printk ("Turbo crystal.\n");
784 break;
785 default:
786 printk ("0x%x. Huh?\n",mem->Common.Crystal);
787 }
788
789 nr_a2232++;
790
791 }
792
Jean Delvare3fa63c72005-10-30 15:02:23 -0800793 printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700794
795 a2232_init_portstructs();
796
797 /*
798 a2232_init_drivers also registers the drivers. Must be here because all boards
799 have to be detected first.
800 */
801 if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx?
802
803 request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, "A2232 serial VBL", a2232_driver_ID);
804 return 0;
805}
806
807static void __exit a2232board_exit(void)
808{
809 int i;
810
811 for (i = 0; i < nr_a2232; i++) {
812 zorro_release_device(zd_a2232[i]);
813 }
814
815 tty_unregister_driver(a2232_driver);
816 put_tty_driver(a2232_driver);
817 free_irq(IRQ_AMIGA_VERTB, a2232_driver_ID);
818}
819
820module_init(a2232board_init);
821module_exit(a2232board_exit);
822
823MODULE_AUTHOR("Enver Haase");
824MODULE_DESCRIPTION("Amiga A2232 multi-serial board driver");
825MODULE_LICENSE("GPL");