Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* -*- linux-c -*- */ |
| 2 | |
| 3 | /* |
| 4 | * Driver for USB Rio 500 |
| 5 | * |
| 6 | * Cesar Miquel (miquel@df.uba.ar) |
| 7 | * |
| 8 | * based on hp_scanner.c by David E. Nelson (dnelson@jump.net) |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or |
| 11 | * modify it under the terms of the GNU General Public License as |
| 12 | * published by the Free Software Foundation; either version 2 of the |
| 13 | * License, or (at your option) any later version. |
| 14 | * |
| 15 | * This program is distributed in the hope that it will be useful, but |
| 16 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 18 | * General Public License for more details. |
| 19 | * |
| 20 | * You should have received a copy of the GNU General Public License |
| 21 | * along with this program; if not, write to the Free Software |
| 22 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 23 | * |
| 24 | * Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee). |
| 25 | * |
| 26 | * Changelog: |
| 27 | * 30/05/2003 replaced lock/unlock kernel with up/down |
| 28 | * Daniele Bellucci bellucda@tiscali.it |
| 29 | * */ |
| 30 | |
| 31 | #include <linux/module.h> |
| 32 | #include <linux/kernel.h> |
| 33 | #include <linux/signal.h> |
| 34 | #include <linux/sched.h> |
| 35 | #include <linux/errno.h> |
| 36 | #include <linux/random.h> |
| 37 | #include <linux/poll.h> |
| 38 | #include <linux/init.h> |
| 39 | #include <linux/slab.h> |
| 40 | #include <linux/spinlock.h> |
| 41 | #include <linux/usb.h> |
| 42 | #include <linux/smp_lock.h> |
| 43 | #include <linux/wait.h> |
| 44 | |
| 45 | #include "rio500_usb.h" |
| 46 | |
| 47 | /* |
| 48 | * Version Information |
| 49 | */ |
| 50 | #define DRIVER_VERSION "v1.1" |
| 51 | #define DRIVER_AUTHOR "Cesar Miquel <miquel@df.uba.ar>" |
| 52 | #define DRIVER_DESC "USB Rio 500 driver" |
| 53 | |
| 54 | #define RIO_MINOR 64 |
| 55 | |
| 56 | /* stall/wait timeout for rio */ |
| 57 | #define NAK_TIMEOUT (HZ) |
| 58 | |
| 59 | #define IBUF_SIZE 0x1000 |
| 60 | |
| 61 | /* Size of the rio buffer */ |
| 62 | #define OBUF_SIZE 0x10000 |
| 63 | |
| 64 | struct rio_usb_data { |
| 65 | struct usb_device *rio_dev; /* init: probe_rio */ |
| 66 | unsigned int ifnum; /* Interface number of the USB device */ |
| 67 | int isopen; /* nz if open */ |
| 68 | int present; /* Device is present on the bus */ |
| 69 | char *obuf, *ibuf; /* transfer buffers */ |
| 70 | char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */ |
| 71 | wait_queue_head_t wait_q; /* for timeouts */ |
| 72 | struct semaphore lock; /* general race avoidance */ |
| 73 | }; |
| 74 | |
| 75 | static struct rio_usb_data rio_instance; |
| 76 | |
| 77 | static int open_rio(struct inode *inode, struct file *file) |
| 78 | { |
| 79 | struct rio_usb_data *rio = &rio_instance; |
| 80 | |
| 81 | down(&(rio->lock)); |
| 82 | |
| 83 | if (rio->isopen || !rio->present) { |
| 84 | up(&(rio->lock)); |
| 85 | return -EBUSY; |
| 86 | } |
| 87 | rio->isopen = 1; |
| 88 | |
| 89 | init_waitqueue_head(&rio->wait_q); |
| 90 | |
| 91 | up(&(rio->lock)); |
| 92 | |
| 93 | info("Rio opened."); |
| 94 | |
| 95 | return 0; |
| 96 | } |
| 97 | |
| 98 | static int close_rio(struct inode *inode, struct file *file) |
| 99 | { |
| 100 | struct rio_usb_data *rio = &rio_instance; |
| 101 | |
| 102 | rio->isopen = 0; |
| 103 | |
| 104 | info("Rio closed."); |
| 105 | return 0; |
| 106 | } |
| 107 | |
| 108 | static int |
| 109 | ioctl_rio(struct inode *inode, struct file *file, unsigned int cmd, |
| 110 | unsigned long arg) |
| 111 | { |
| 112 | struct RioCommand rio_cmd; |
| 113 | struct rio_usb_data *rio = &rio_instance; |
| 114 | void __user *data; |
| 115 | unsigned char *buffer; |
| 116 | int result, requesttype; |
| 117 | int retries; |
| 118 | int retval=0; |
| 119 | |
| 120 | down(&(rio->lock)); |
| 121 | /* Sanity check to make sure rio is connected, powered, etc */ |
| 122 | if ( rio == NULL || |
| 123 | rio->present == 0 || |
| 124 | rio->rio_dev == NULL ) |
| 125 | { |
| 126 | retval = -ENODEV; |
| 127 | goto err_out; |
| 128 | } |
| 129 | |
| 130 | switch (cmd) { |
| 131 | case RIO_RECV_COMMAND: |
| 132 | data = (void __user *) arg; |
| 133 | if (data == NULL) |
| 134 | break; |
| 135 | if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) { |
| 136 | retval = -EFAULT; |
| 137 | goto err_out; |
| 138 | } |
| 139 | if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) { |
| 140 | retval = -EINVAL; |
| 141 | goto err_out; |
| 142 | } |
| 143 | buffer = (unsigned char *) __get_free_page(GFP_KERNEL); |
| 144 | if (buffer == NULL) { |
| 145 | retval = -ENOMEM; |
| 146 | goto err_out; |
| 147 | } |
| 148 | if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) { |
| 149 | retval = -EFAULT; |
| 150 | free_page((unsigned long) buffer); |
| 151 | goto err_out; |
| 152 | } |
| 153 | |
| 154 | requesttype = rio_cmd.requesttype | USB_DIR_IN | |
| 155 | USB_TYPE_VENDOR | USB_RECIP_DEVICE; |
| 156 | dbg |
| 157 | ("sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x", |
| 158 | requesttype, rio_cmd.request, rio_cmd.value, |
| 159 | rio_cmd.index, rio_cmd.length); |
| 160 | /* Send rio control message */ |
| 161 | retries = 3; |
| 162 | while (retries) { |
| 163 | result = usb_control_msg(rio->rio_dev, |
| 164 | usb_rcvctrlpipe(rio-> rio_dev, 0), |
| 165 | rio_cmd.request, |
| 166 | requesttype, |
| 167 | rio_cmd.value, |
| 168 | rio_cmd.index, buffer, |
| 169 | rio_cmd.length, |
| 170 | jiffies_to_msecs(rio_cmd.timeout)); |
| 171 | if (result == -ETIMEDOUT) |
| 172 | retries--; |
| 173 | else if (result < 0) { |
| 174 | err("Error executing ioctrl. code = %d", result); |
| 175 | retries = 0; |
| 176 | } else { |
| 177 | dbg("Executed ioctl. Result = %d (data=%02x)", |
| 178 | result, buffer[0]); |
| 179 | if (copy_to_user(rio_cmd.buffer, buffer, |
| 180 | rio_cmd.length)) { |
| 181 | free_page((unsigned long) buffer); |
| 182 | retval = -EFAULT; |
| 183 | goto err_out; |
| 184 | } |
| 185 | retries = 0; |
| 186 | } |
| 187 | |
| 188 | /* rio_cmd.buffer contains a raw stream of single byte |
| 189 | data which has been returned from rio. Data is |
| 190 | interpreted at application level. For data that |
| 191 | will be cast to data types longer than 1 byte, data |
| 192 | will be little_endian and will potentially need to |
| 193 | be swapped at the app level */ |
| 194 | |
| 195 | } |
| 196 | free_page((unsigned long) buffer); |
| 197 | break; |
| 198 | |
| 199 | case RIO_SEND_COMMAND: |
| 200 | data = (void __user *) arg; |
| 201 | if (data == NULL) |
| 202 | break; |
| 203 | if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) { |
| 204 | retval = -EFAULT; |
| 205 | goto err_out; |
| 206 | } |
| 207 | if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) { |
| 208 | retval = -EINVAL; |
| 209 | goto err_out; |
| 210 | } |
| 211 | buffer = (unsigned char *) __get_free_page(GFP_KERNEL); |
| 212 | if (buffer == NULL) { |
| 213 | retval = -ENOMEM; |
| 214 | goto err_out; |
| 215 | } |
| 216 | if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) { |
| 217 | free_page((unsigned long)buffer); |
| 218 | retval = -EFAULT; |
| 219 | goto err_out; |
| 220 | } |
| 221 | |
| 222 | requesttype = rio_cmd.requesttype | USB_DIR_OUT | |
| 223 | USB_TYPE_VENDOR | USB_RECIP_DEVICE; |
| 224 | dbg("sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x", |
| 225 | requesttype, rio_cmd.request, rio_cmd.value, |
| 226 | rio_cmd.index, rio_cmd.length); |
| 227 | /* Send rio control message */ |
| 228 | retries = 3; |
| 229 | while (retries) { |
| 230 | result = usb_control_msg(rio->rio_dev, |
| 231 | usb_sndctrlpipe(rio-> rio_dev, 0), |
| 232 | rio_cmd.request, |
| 233 | requesttype, |
| 234 | rio_cmd.value, |
| 235 | rio_cmd.index, buffer, |
| 236 | rio_cmd.length, |
| 237 | jiffies_to_msecs(rio_cmd.timeout)); |
| 238 | if (result == -ETIMEDOUT) |
| 239 | retries--; |
| 240 | else if (result < 0) { |
| 241 | err("Error executing ioctrl. code = %d", result); |
| 242 | retries = 0; |
| 243 | } else { |
| 244 | dbg("Executed ioctl. Result = %d", result); |
| 245 | retries = 0; |
| 246 | |
| 247 | } |
| 248 | |
| 249 | } |
| 250 | free_page((unsigned long) buffer); |
| 251 | break; |
| 252 | |
| 253 | default: |
| 254 | retval = -ENOTTY; |
| 255 | break; |
| 256 | } |
| 257 | |
| 258 | |
| 259 | err_out: |
| 260 | up(&(rio->lock)); |
| 261 | return retval; |
| 262 | } |
| 263 | |
| 264 | static ssize_t |
| 265 | write_rio(struct file *file, const char __user *buffer, |
| 266 | size_t count, loff_t * ppos) |
| 267 | { |
| 268 | DEFINE_WAIT(wait); |
| 269 | struct rio_usb_data *rio = &rio_instance; |
| 270 | |
| 271 | unsigned long copy_size; |
| 272 | unsigned long bytes_written = 0; |
| 273 | unsigned int partial; |
| 274 | |
| 275 | int result = 0; |
| 276 | int maxretry; |
| 277 | int errn = 0; |
| 278 | |
| 279 | down(&(rio->lock)); |
| 280 | /* Sanity check to make sure rio is connected, powered, etc */ |
| 281 | if ( rio == NULL || |
| 282 | rio->present == 0 || |
| 283 | rio->rio_dev == NULL ) |
| 284 | { |
| 285 | up(&(rio->lock)); |
| 286 | return -ENODEV; |
| 287 | } |
| 288 | |
| 289 | |
| 290 | |
| 291 | do { |
| 292 | unsigned long thistime; |
| 293 | char *obuf = rio->obuf; |
| 294 | |
| 295 | thistime = copy_size = |
| 296 | (count >= OBUF_SIZE) ? OBUF_SIZE : count; |
| 297 | if (copy_from_user(rio->obuf, buffer, copy_size)) { |
| 298 | errn = -EFAULT; |
| 299 | goto error; |
| 300 | } |
| 301 | maxretry = 5; |
| 302 | while (thistime) { |
| 303 | if (!rio->rio_dev) { |
| 304 | errn = -ENODEV; |
| 305 | goto error; |
| 306 | } |
| 307 | if (signal_pending(current)) { |
| 308 | up(&(rio->lock)); |
| 309 | return bytes_written ? bytes_written : -EINTR; |
| 310 | } |
| 311 | |
| 312 | result = usb_bulk_msg(rio->rio_dev, |
| 313 | usb_sndbulkpipe(rio->rio_dev, 2), |
| 314 | obuf, thistime, &partial, 5000); |
| 315 | |
| 316 | dbg("write stats: result:%d thistime:%lu partial:%u", |
| 317 | result, thistime, partial); |
| 318 | |
| 319 | if (result == -ETIMEDOUT) { /* NAK - so hold for a while */ |
| 320 | if (!maxretry--) { |
| 321 | errn = -ETIME; |
| 322 | goto error; |
| 323 | } |
| 324 | prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE); |
| 325 | schedule_timeout(NAK_TIMEOUT); |
| 326 | finish_wait(&rio->wait_q, &wait); |
| 327 | continue; |
| 328 | } else if (!result && partial) { |
| 329 | obuf += partial; |
| 330 | thistime -= partial; |
| 331 | } else |
| 332 | break; |
| 333 | }; |
| 334 | if (result) { |
| 335 | err("Write Whoops - %x", result); |
| 336 | errn = -EIO; |
| 337 | goto error; |
| 338 | } |
| 339 | bytes_written += copy_size; |
| 340 | count -= copy_size; |
| 341 | buffer += copy_size; |
| 342 | } while (count > 0); |
| 343 | |
| 344 | up(&(rio->lock)); |
| 345 | |
| 346 | return bytes_written ? bytes_written : -EIO; |
| 347 | |
| 348 | error: |
| 349 | up(&(rio->lock)); |
| 350 | return errn; |
| 351 | } |
| 352 | |
| 353 | static ssize_t |
| 354 | read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) |
| 355 | { |
| 356 | DEFINE_WAIT(wait); |
| 357 | struct rio_usb_data *rio = &rio_instance; |
| 358 | ssize_t read_count; |
| 359 | unsigned int partial; |
| 360 | int this_read; |
| 361 | int result; |
| 362 | int maxretry = 10; |
| 363 | char *ibuf; |
| 364 | |
| 365 | down(&(rio->lock)); |
| 366 | /* Sanity check to make sure rio is connected, powered, etc */ |
| 367 | if ( rio == NULL || |
| 368 | rio->present == 0 || |
| 369 | rio->rio_dev == NULL ) |
| 370 | { |
| 371 | up(&(rio->lock)); |
| 372 | return -ENODEV; |
| 373 | } |
| 374 | |
| 375 | ibuf = rio->ibuf; |
| 376 | |
| 377 | read_count = 0; |
| 378 | |
| 379 | |
| 380 | while (count > 0) { |
| 381 | if (signal_pending(current)) { |
| 382 | up(&(rio->lock)); |
| 383 | return read_count ? read_count : -EINTR; |
| 384 | } |
| 385 | if (!rio->rio_dev) { |
| 386 | up(&(rio->lock)); |
| 387 | return -ENODEV; |
| 388 | } |
| 389 | this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count; |
| 390 | |
| 391 | result = usb_bulk_msg(rio->rio_dev, |
| 392 | usb_rcvbulkpipe(rio->rio_dev, 1), |
| 393 | ibuf, this_read, &partial, |
| 394 | 8000); |
| 395 | |
| 396 | dbg(KERN_DEBUG "read stats: result:%d this_read:%u partial:%u", |
| 397 | result, this_read, partial); |
| 398 | |
| 399 | if (partial) { |
| 400 | count = this_read = partial; |
| 401 | } else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */ |
| 402 | if (!maxretry--) { |
| 403 | up(&(rio->lock)); |
| 404 | err("read_rio: maxretry timeout"); |
| 405 | return -ETIME; |
| 406 | } |
| 407 | prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE); |
| 408 | schedule_timeout(NAK_TIMEOUT); |
| 409 | finish_wait(&rio->wait_q, &wait); |
| 410 | continue; |
| 411 | } else if (result != -EREMOTEIO) { |
| 412 | up(&(rio->lock)); |
| 413 | err("Read Whoops - result:%u partial:%u this_read:%u", |
| 414 | result, partial, this_read); |
| 415 | return -EIO; |
| 416 | } else { |
| 417 | up(&(rio->lock)); |
| 418 | return (0); |
| 419 | } |
| 420 | |
| 421 | if (this_read) { |
| 422 | if (copy_to_user(buffer, ibuf, this_read)) { |
| 423 | up(&(rio->lock)); |
| 424 | return -EFAULT; |
| 425 | } |
| 426 | count -= this_read; |
| 427 | read_count += this_read; |
| 428 | buffer += this_read; |
| 429 | } |
| 430 | } |
| 431 | up(&(rio->lock)); |
| 432 | return read_count; |
| 433 | } |
| 434 | |
| 435 | static struct |
| 436 | file_operations usb_rio_fops = { |
| 437 | .owner = THIS_MODULE, |
| 438 | .read = read_rio, |
| 439 | .write = write_rio, |
| 440 | .ioctl = ioctl_rio, |
| 441 | .open = open_rio, |
| 442 | .release = close_rio, |
| 443 | }; |
| 444 | |
| 445 | static struct usb_class_driver usb_rio_class = { |
| 446 | .name = "usb/rio500%d", |
| 447 | .fops = &usb_rio_fops, |
| 448 | .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, |
| 449 | .minor_base = RIO_MINOR, |
| 450 | }; |
| 451 | |
| 452 | static int probe_rio(struct usb_interface *intf, |
| 453 | const struct usb_device_id *id) |
| 454 | { |
| 455 | struct usb_device *dev = interface_to_usbdev(intf); |
| 456 | struct rio_usb_data *rio = &rio_instance; |
| 457 | int retval; |
| 458 | |
| 459 | info("USB Rio found at address %d", dev->devnum); |
| 460 | |
| 461 | retval = usb_register_dev(intf, &usb_rio_class); |
| 462 | if (retval) { |
| 463 | err("Not able to get a minor for this device."); |
| 464 | return -ENOMEM; |
| 465 | } |
| 466 | |
| 467 | rio->rio_dev = dev; |
| 468 | |
| 469 | if (!(rio->obuf = (char *) kmalloc(OBUF_SIZE, GFP_KERNEL))) { |
| 470 | err("probe_rio: Not enough memory for the output buffer"); |
| 471 | usb_deregister_dev(intf, &usb_rio_class); |
| 472 | return -ENOMEM; |
| 473 | } |
| 474 | dbg("probe_rio: obuf address:%p", rio->obuf); |
| 475 | |
| 476 | if (!(rio->ibuf = (char *) kmalloc(IBUF_SIZE, GFP_KERNEL))) { |
| 477 | err("probe_rio: Not enough memory for the input buffer"); |
| 478 | usb_deregister_dev(intf, &usb_rio_class); |
| 479 | kfree(rio->obuf); |
| 480 | return -ENOMEM; |
| 481 | } |
| 482 | dbg("probe_rio: ibuf address:%p", rio->ibuf); |
| 483 | |
| 484 | init_MUTEX(&(rio->lock)); |
| 485 | |
| 486 | usb_set_intfdata (intf, rio); |
| 487 | rio->present = 1; |
| 488 | |
| 489 | return 0; |
| 490 | } |
| 491 | |
| 492 | static void disconnect_rio(struct usb_interface *intf) |
| 493 | { |
| 494 | struct rio_usb_data *rio = usb_get_intfdata (intf); |
| 495 | |
| 496 | usb_set_intfdata (intf, NULL); |
| 497 | if (rio) { |
| 498 | usb_deregister_dev(intf, &usb_rio_class); |
| 499 | |
| 500 | down(&(rio->lock)); |
| 501 | if (rio->isopen) { |
| 502 | rio->isopen = 0; |
| 503 | /* better let it finish - the release will do whats needed */ |
| 504 | rio->rio_dev = NULL; |
| 505 | up(&(rio->lock)); |
| 506 | return; |
| 507 | } |
| 508 | kfree(rio->ibuf); |
| 509 | kfree(rio->obuf); |
| 510 | |
| 511 | info("USB Rio disconnected."); |
| 512 | |
| 513 | rio->present = 0; |
| 514 | up(&(rio->lock)); |
| 515 | } |
| 516 | } |
| 517 | |
| 518 | static struct usb_device_id rio_table [] = { |
| 519 | { USB_DEVICE(0x0841, 1) }, /* Rio 500 */ |
| 520 | { } /* Terminating entry */ |
| 521 | }; |
| 522 | |
| 523 | MODULE_DEVICE_TABLE (usb, rio_table); |
| 524 | |
| 525 | static struct usb_driver rio_driver = { |
| 526 | .owner = THIS_MODULE, |
| 527 | .name = "rio500", |
| 528 | .probe = probe_rio, |
| 529 | .disconnect = disconnect_rio, |
| 530 | .id_table = rio_table, |
| 531 | }; |
| 532 | |
| 533 | static int __init usb_rio_init(void) |
| 534 | { |
| 535 | int retval; |
| 536 | retval = usb_register(&rio_driver); |
| 537 | if (retval) |
| 538 | goto out; |
| 539 | |
| 540 | info(DRIVER_VERSION ":" DRIVER_DESC); |
| 541 | |
| 542 | out: |
| 543 | return retval; |
| 544 | } |
| 545 | |
| 546 | |
| 547 | static void __exit usb_rio_cleanup(void) |
| 548 | { |
| 549 | struct rio_usb_data *rio = &rio_instance; |
| 550 | |
| 551 | rio->present = 0; |
| 552 | usb_deregister(&rio_driver); |
| 553 | |
| 554 | |
| 555 | } |
| 556 | |
| 557 | module_init(usb_rio_init); |
| 558 | module_exit(usb_rio_cleanup); |
| 559 | |
| 560 | MODULE_AUTHOR( DRIVER_AUTHOR ); |
| 561 | MODULE_DESCRIPTION( DRIVER_DESC ); |
| 562 | MODULE_LICENSE("GPL"); |
| 563 | |