Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 1 | /* |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 2 | * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> |
| 3 | * |
| 4 | * Based on msm_serial.c, which is: |
| 5 | * Copyright (C) 2007 Google, Inc. |
| 6 | * Author: Robert Love <rlove@google.com> |
| 7 | * |
| 8 | * This software is licensed under the terms of the GNU General Public |
| 9 | * License version 2, as published by the Free Software Foundation, and |
| 10 | * may be copied, distributed, and modified under those terms. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | */ |
| 17 | |
| 18 | #if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) |
| 19 | # define SUPPORT_SYSRQ |
| 20 | #endif |
| 21 | |
| 22 | #include <linux/hrtimer.h> |
| 23 | #include <linux/delay.h> |
| 24 | #include <linux/module.h> |
| 25 | #include <linux/io.h> |
| 26 | #include <linux/ioport.h> |
| 27 | #include <linux/irq.h> |
| 28 | #include <linux/init.h> |
| 29 | #include <linux/console.h> |
| 30 | #include <linux/tty.h> |
| 31 | #include <linux/tty_flip.h> |
| 32 | #include <linux/serial_core.h> |
| 33 | #include <linux/serial.h> |
| 34 | #include <linux/slab.h> |
| 35 | #include <linux/clk.h> |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 36 | #include <linux/of.h> |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 37 | #include <linux/of_device.h> |
Sachin Kamat | 82b2313 | 2013-03-04 14:24:39 +0530 | [diff] [blame] | 38 | #include <linux/err.h> |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 39 | |
| 40 | /* |
| 41 | * UART Register offsets |
| 42 | */ |
| 43 | |
| 44 | #define VT8500_URTDR 0x0000 /* Transmit data */ |
| 45 | #define VT8500_URRDR 0x0004 /* Receive data */ |
| 46 | #define VT8500_URDIV 0x0008 /* Clock/Baud rate divisor */ |
| 47 | #define VT8500_URLCR 0x000C /* Line control */ |
| 48 | #define VT8500_URICR 0x0010 /* IrDA control */ |
| 49 | #define VT8500_URIER 0x0014 /* Interrupt enable */ |
| 50 | #define VT8500_URISR 0x0018 /* Interrupt status */ |
| 51 | #define VT8500_URUSR 0x001c /* UART status */ |
| 52 | #define VT8500_URFCR 0x0020 /* FIFO control */ |
| 53 | #define VT8500_URFIDX 0x0024 /* FIFO index */ |
| 54 | #define VT8500_URBKR 0x0028 /* Break signal count */ |
| 55 | #define VT8500_URTOD 0x002c /* Time out divisor */ |
| 56 | #define VT8500_TXFIFO 0x1000 /* Transmit FIFO (16x8) */ |
| 57 | #define VT8500_RXFIFO 0x1020 /* Receive FIFO (16x10) */ |
| 58 | |
| 59 | /* |
| 60 | * Interrupt enable and status bits |
| 61 | */ |
| 62 | |
| 63 | #define TXDE (1 << 0) /* Tx Data empty */ |
| 64 | #define RXDF (1 << 1) /* Rx Data full */ |
| 65 | #define TXFAE (1 << 2) /* Tx FIFO almost empty */ |
| 66 | #define TXFE (1 << 3) /* Tx FIFO empty */ |
| 67 | #define RXFAF (1 << 4) /* Rx FIFO almost full */ |
| 68 | #define RXFF (1 << 5) /* Rx FIFO full */ |
| 69 | #define TXUDR (1 << 6) /* Tx underrun */ |
| 70 | #define RXOVER (1 << 7) /* Rx overrun */ |
| 71 | #define PER (1 << 8) /* Parity error */ |
| 72 | #define FER (1 << 9) /* Frame error */ |
| 73 | #define TCTS (1 << 10) /* Toggle of CTS */ |
| 74 | #define RXTOUT (1 << 11) /* Rx timeout */ |
| 75 | #define BKDONE (1 << 12) /* Break signal done */ |
| 76 | #define ERR (1 << 13) /* AHB error response */ |
| 77 | |
| 78 | #define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT) |
| 79 | #define TX_FIFO_INTS (TXFAE | TXFE | TXUDR) |
| 80 | |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 81 | /* |
| 82 | * Line control bits |
| 83 | */ |
| 84 | |
| 85 | #define VT8500_TXEN (1 << 0) /* Enable transmit logic */ |
| 86 | #define VT8500_RXEN (1 << 1) /* Enable receive logic */ |
| 87 | #define VT8500_CS8 (1 << 2) /* 8-bit data length (vs. 7-bit) */ |
| 88 | #define VT8500_CSTOPB (1 << 3) /* 2 stop bits (vs. 1) */ |
| 89 | #define VT8500_PARENB (1 << 4) /* Enable parity */ |
| 90 | #define VT8500_PARODD (1 << 5) /* Odd parity (vs. even) */ |
| 91 | #define VT8500_RTS (1 << 6) /* Ready to send */ |
| 92 | #define VT8500_LOOPBK (1 << 7) /* Enable internal loopback */ |
| 93 | #define VT8500_DMA (1 << 8) /* Enable DMA mode (needs FIFO) */ |
| 94 | #define VT8500_BREAK (1 << 9) /* Initiate break signal */ |
| 95 | #define VT8500_PSLVERR (1 << 10) /* APB error upon empty RX FIFO read */ |
| 96 | #define VT8500_SWRTSCTS (1 << 11) /* Software-controlled RTS/CTS */ |
| 97 | |
| 98 | /* |
| 99 | * Capability flags (driver-internal) |
| 100 | */ |
| 101 | |
| 102 | #define VT8500_HAS_SWRTSCTS_SWITCH (1 << 1) |
| 103 | |
Alexey Charkov | 5aa387c | 2014-09-06 21:21:14 +0400 | [diff] [blame] | 104 | #define VT8500_RECOMMENDED_CLK 12000000 |
| 105 | #define VT8500_OVERSAMPLING_DIVISOR 13 |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 106 | #define VT8500_MAX_PORTS 6 |
| 107 | |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 108 | struct vt8500_port { |
| 109 | struct uart_port uart; |
| 110 | char name[16]; |
| 111 | struct clk *clk; |
Alexey Charkov | 5aa387c | 2014-09-06 21:21:14 +0400 | [diff] [blame] | 112 | unsigned int clk_predivisor; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 113 | unsigned int ier; |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 114 | unsigned int vt8500_uart_flags; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 115 | }; |
| 116 | |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 117 | /* |
| 118 | * we use this variable to keep track of which ports |
| 119 | * have been allocated as we can't use pdev->id in |
| 120 | * devicetree |
| 121 | */ |
| 122 | static unsigned long vt8500_ports_in_use; |
| 123 | |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 124 | static inline void vt8500_write(struct uart_port *port, unsigned int val, |
| 125 | unsigned int off) |
| 126 | { |
| 127 | writel(val, port->membase + off); |
| 128 | } |
| 129 | |
| 130 | static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off) |
| 131 | { |
| 132 | return readl(port->membase + off); |
| 133 | } |
| 134 | |
| 135 | static void vt8500_stop_tx(struct uart_port *port) |
| 136 | { |
| 137 | struct vt8500_port *vt8500_port = container_of(port, |
| 138 | struct vt8500_port, |
| 139 | uart); |
| 140 | |
| 141 | vt8500_port->ier &= ~TX_FIFO_INTS; |
| 142 | vt8500_write(port, vt8500_port->ier, VT8500_URIER); |
| 143 | } |
| 144 | |
| 145 | static void vt8500_stop_rx(struct uart_port *port) |
| 146 | { |
| 147 | struct vt8500_port *vt8500_port = container_of(port, |
| 148 | struct vt8500_port, |
| 149 | uart); |
| 150 | |
| 151 | vt8500_port->ier &= ~RX_FIFO_INTS; |
| 152 | vt8500_write(port, vt8500_port->ier, VT8500_URIER); |
| 153 | } |
| 154 | |
| 155 | static void vt8500_enable_ms(struct uart_port *port) |
| 156 | { |
| 157 | struct vt8500_port *vt8500_port = container_of(port, |
| 158 | struct vt8500_port, |
| 159 | uart); |
| 160 | |
| 161 | vt8500_port->ier |= TCTS; |
| 162 | vt8500_write(port, vt8500_port->ier, VT8500_URIER); |
| 163 | } |
| 164 | |
| 165 | static void handle_rx(struct uart_port *port) |
| 166 | { |
Jiri Slaby | 92a19f9 | 2013-01-03 15:53:03 +0100 | [diff] [blame] | 167 | struct tty_port *tport = &port->state->port; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 168 | |
| 169 | /* |
| 170 | * Handle overrun |
| 171 | */ |
| 172 | if ((vt8500_read(port, VT8500_URISR) & RXOVER)) { |
| 173 | port->icount.overrun++; |
Jiri Slaby | 92a19f9 | 2013-01-03 15:53:03 +0100 | [diff] [blame] | 174 | tty_insert_flip_char(tport, 0, TTY_OVERRUN); |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 175 | } |
| 176 | |
| 177 | /* and now the main RX loop */ |
| 178 | while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) { |
| 179 | unsigned int c; |
| 180 | char flag = TTY_NORMAL; |
| 181 | |
| 182 | c = readw(port->membase + VT8500_RXFIFO) & 0x3ff; |
| 183 | |
| 184 | /* Mask conditions we're ignorning. */ |
| 185 | c &= ~port->read_status_mask; |
| 186 | |
| 187 | if (c & FER) { |
| 188 | port->icount.frame++; |
| 189 | flag = TTY_FRAME; |
| 190 | } else if (c & PER) { |
| 191 | port->icount.parity++; |
| 192 | flag = TTY_PARITY; |
| 193 | } |
| 194 | port->icount.rx++; |
| 195 | |
| 196 | if (!uart_handle_sysrq_char(port, c)) |
Jiri Slaby | 92a19f9 | 2013-01-03 15:53:03 +0100 | [diff] [blame] | 197 | tty_insert_flip_char(tport, c, flag); |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 198 | } |
| 199 | |
Viresh Kumar | de49df5 | 2013-08-19 20:14:29 +0530 | [diff] [blame] | 200 | spin_unlock(&port->lock); |
Jiri Slaby | 2e124b4 | 2013-01-03 15:53:06 +0100 | [diff] [blame] | 201 | tty_flip_buffer_push(tport); |
Viresh Kumar | de49df5 | 2013-08-19 20:14:29 +0530 | [diff] [blame] | 202 | spin_lock(&port->lock); |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 203 | } |
| 204 | |
| 205 | static void handle_tx(struct uart_port *port) |
| 206 | { |
| 207 | struct circ_buf *xmit = &port->state->xmit; |
| 208 | |
| 209 | if (port->x_char) { |
| 210 | writeb(port->x_char, port->membase + VT8500_TXFIFO); |
| 211 | port->icount.tx++; |
| 212 | port->x_char = 0; |
| 213 | } |
| 214 | if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { |
| 215 | vt8500_stop_tx(port); |
| 216 | return; |
| 217 | } |
| 218 | |
| 219 | while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) { |
| 220 | if (uart_circ_empty(xmit)) |
| 221 | break; |
| 222 | |
| 223 | writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO); |
| 224 | |
| 225 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); |
| 226 | port->icount.tx++; |
| 227 | } |
| 228 | |
| 229 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
| 230 | uart_write_wakeup(port); |
| 231 | |
| 232 | if (uart_circ_empty(xmit)) |
| 233 | vt8500_stop_tx(port); |
| 234 | } |
| 235 | |
| 236 | static void vt8500_start_tx(struct uart_port *port) |
| 237 | { |
| 238 | struct vt8500_port *vt8500_port = container_of(port, |
| 239 | struct vt8500_port, |
| 240 | uart); |
| 241 | |
| 242 | vt8500_port->ier &= ~TX_FIFO_INTS; |
| 243 | vt8500_write(port, vt8500_port->ier, VT8500_URIER); |
| 244 | handle_tx(port); |
| 245 | vt8500_port->ier |= TX_FIFO_INTS; |
| 246 | vt8500_write(port, vt8500_port->ier, VT8500_URIER); |
| 247 | } |
| 248 | |
| 249 | static void handle_delta_cts(struct uart_port *port) |
| 250 | { |
| 251 | port->icount.cts++; |
| 252 | wake_up_interruptible(&port->state->port.delta_msr_wait); |
| 253 | } |
| 254 | |
| 255 | static irqreturn_t vt8500_irq(int irq, void *dev_id) |
| 256 | { |
| 257 | struct uart_port *port = dev_id; |
| 258 | unsigned long isr; |
| 259 | |
| 260 | spin_lock(&port->lock); |
| 261 | isr = vt8500_read(port, VT8500_URISR); |
| 262 | |
| 263 | /* Acknowledge active status bits */ |
| 264 | vt8500_write(port, isr, VT8500_URISR); |
| 265 | |
| 266 | if (isr & RX_FIFO_INTS) |
| 267 | handle_rx(port); |
| 268 | if (isr & TX_FIFO_INTS) |
| 269 | handle_tx(port); |
| 270 | if (isr & TCTS) |
| 271 | handle_delta_cts(port); |
| 272 | |
| 273 | spin_unlock(&port->lock); |
| 274 | |
| 275 | return IRQ_HANDLED; |
| 276 | } |
| 277 | |
| 278 | static unsigned int vt8500_tx_empty(struct uart_port *port) |
| 279 | { |
| 280 | return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ? |
| 281 | TIOCSER_TEMT : 0; |
| 282 | } |
| 283 | |
| 284 | static unsigned int vt8500_get_mctrl(struct uart_port *port) |
| 285 | { |
| 286 | unsigned int usr; |
| 287 | |
| 288 | usr = vt8500_read(port, VT8500_URUSR); |
| 289 | if (usr & (1 << 4)) |
| 290 | return TIOCM_CTS; |
| 291 | else |
| 292 | return 0; |
| 293 | } |
| 294 | |
| 295 | static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl) |
| 296 | { |
Alexey Charkov | 8c986d3 | 2014-09-06 21:21:13 +0400 | [diff] [blame] | 297 | unsigned int lcr = vt8500_read(port, VT8500_URLCR); |
| 298 | |
| 299 | if (mctrl & TIOCM_RTS) |
| 300 | lcr |= VT8500_RTS; |
| 301 | else |
| 302 | lcr &= ~VT8500_RTS; |
| 303 | |
| 304 | vt8500_write(port, lcr, VT8500_URLCR); |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 305 | } |
| 306 | |
| 307 | static void vt8500_break_ctl(struct uart_port *port, int break_ctl) |
| 308 | { |
| 309 | if (break_ctl) |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 310 | vt8500_write(port, |
| 311 | vt8500_read(port, VT8500_URLCR) | VT8500_BREAK, |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 312 | VT8500_URLCR); |
| 313 | } |
| 314 | |
| 315 | static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud) |
| 316 | { |
Alexey Charkov | 5aa387c | 2014-09-06 21:21:14 +0400 | [diff] [blame] | 317 | struct vt8500_port *vt8500_port = |
| 318 | container_of(port, struct vt8500_port, uart); |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 319 | unsigned long div; |
| 320 | unsigned int loops = 1000; |
| 321 | |
Alexey Charkov | 5aa387c | 2014-09-06 21:21:14 +0400 | [diff] [blame] | 322 | div = ((vt8500_port->clk_predivisor - 1) & 0xf) << 16; |
| 323 | div |= (uart_get_divisor(port, baud) - 1) & 0x3ff; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 324 | |
Alexey Charkov | 5aa387c | 2014-09-06 21:21:14 +0400 | [diff] [blame] | 325 | /* Effective baud rate */ |
| 326 | baud = port->uartclk / 16 / ((div & 0x3ff) + 1); |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 327 | |
| 328 | while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops) |
| 329 | cpu_relax(); |
Alexey Charkov | 5aa387c | 2014-09-06 21:21:14 +0400 | [diff] [blame] | 330 | |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 331 | vt8500_write(port, div, VT8500_URDIV); |
| 332 | |
Alexey Charkov | 5aa387c | 2014-09-06 21:21:14 +0400 | [diff] [blame] | 333 | /* Break signal timing depends on baud rate, update accordingly */ |
| 334 | vt8500_write(port, mult_frac(baud, 4096, 1000000), VT8500_URBKR); |
| 335 | |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 336 | return baud; |
| 337 | } |
| 338 | |
| 339 | static int vt8500_startup(struct uart_port *port) |
| 340 | { |
| 341 | struct vt8500_port *vt8500_port = |
| 342 | container_of(port, struct vt8500_port, uart); |
| 343 | int ret; |
| 344 | |
| 345 | snprintf(vt8500_port->name, sizeof(vt8500_port->name), |
| 346 | "vt8500_serial%d", port->line); |
| 347 | |
| 348 | ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH, |
| 349 | vt8500_port->name, port); |
| 350 | if (unlikely(ret)) |
| 351 | return ret; |
| 352 | |
| 353 | vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */ |
| 354 | |
| 355 | return 0; |
| 356 | } |
| 357 | |
| 358 | static void vt8500_shutdown(struct uart_port *port) |
| 359 | { |
| 360 | struct vt8500_port *vt8500_port = |
| 361 | container_of(port, struct vt8500_port, uart); |
| 362 | |
| 363 | vt8500_port->ier = 0; |
| 364 | |
| 365 | /* disable interrupts and FIFOs */ |
| 366 | vt8500_write(&vt8500_port->uart, 0, VT8500_URIER); |
| 367 | vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR); |
| 368 | free_irq(port->irq, port); |
| 369 | } |
| 370 | |
| 371 | static void vt8500_set_termios(struct uart_port *port, |
| 372 | struct ktermios *termios, |
| 373 | struct ktermios *old) |
| 374 | { |
| 375 | struct vt8500_port *vt8500_port = |
| 376 | container_of(port, struct vt8500_port, uart); |
| 377 | unsigned long flags; |
| 378 | unsigned int baud, lcr; |
| 379 | unsigned int loops = 1000; |
| 380 | |
| 381 | spin_lock_irqsave(&port->lock, flags); |
| 382 | |
| 383 | /* calculate and set baud rate */ |
| 384 | baud = uart_get_baud_rate(port, termios, old, 900, 921600); |
| 385 | baud = vt8500_set_baud_rate(port, baud); |
| 386 | if (tty_termios_baud_rate(termios)) |
| 387 | tty_termios_encode_baud_rate(termios, baud, baud); |
| 388 | |
| 389 | /* calculate parity */ |
| 390 | lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR); |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 391 | lcr &= ~(VT8500_PARENB | VT8500_PARODD); |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 392 | if (termios->c_cflag & PARENB) { |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 393 | lcr |= VT8500_PARENB; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 394 | termios->c_cflag &= ~CMSPAR; |
| 395 | if (termios->c_cflag & PARODD) |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 396 | lcr |= VT8500_PARODD; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 397 | } |
| 398 | |
| 399 | /* calculate bits per char */ |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 400 | lcr &= ~VT8500_CS8; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 401 | switch (termios->c_cflag & CSIZE) { |
| 402 | case CS7: |
| 403 | break; |
| 404 | case CS8: |
| 405 | default: |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 406 | lcr |= VT8500_CS8; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 407 | termios->c_cflag &= ~CSIZE; |
| 408 | termios->c_cflag |= CS8; |
| 409 | break; |
| 410 | } |
| 411 | |
| 412 | /* calculate stop bits */ |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 413 | lcr &= ~VT8500_CSTOPB; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 414 | if (termios->c_cflag & CSTOPB) |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 415 | lcr |= VT8500_CSTOPB; |
| 416 | |
| 417 | lcr &= ~VT8500_SWRTSCTS; |
| 418 | if (vt8500_port->vt8500_uart_flags & VT8500_HAS_SWRTSCTS_SWITCH) |
| 419 | lcr |= VT8500_SWRTSCTS; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 420 | |
| 421 | /* set parity, bits per char, and stop bit */ |
| 422 | vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR); |
| 423 | |
| 424 | /* Configure status bits to ignore based on termio flags. */ |
| 425 | port->read_status_mask = 0; |
| 426 | if (termios->c_iflag & IGNPAR) |
| 427 | port->read_status_mask = FER | PER; |
| 428 | |
| 429 | uart_update_timeout(port, termios->c_cflag, baud); |
| 430 | |
| 431 | /* Reset FIFOs */ |
| 432 | vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR); |
| 433 | while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc) |
| 434 | && --loops) |
| 435 | cpu_relax(); |
| 436 | |
| 437 | /* Every possible FIFO-related interrupt */ |
| 438 | vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS; |
| 439 | |
| 440 | /* |
| 441 | * CTS flow control |
| 442 | */ |
| 443 | if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag)) |
| 444 | vt8500_port->ier |= TCTS; |
| 445 | |
| 446 | vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR); |
| 447 | vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER); |
| 448 | |
| 449 | spin_unlock_irqrestore(&port->lock, flags); |
| 450 | } |
| 451 | |
| 452 | static const char *vt8500_type(struct uart_port *port) |
| 453 | { |
| 454 | struct vt8500_port *vt8500_port = |
| 455 | container_of(port, struct vt8500_port, uart); |
| 456 | return vt8500_port->name; |
| 457 | } |
| 458 | |
| 459 | static void vt8500_release_port(struct uart_port *port) |
| 460 | { |
| 461 | } |
| 462 | |
| 463 | static int vt8500_request_port(struct uart_port *port) |
| 464 | { |
| 465 | return 0; |
| 466 | } |
| 467 | |
| 468 | static void vt8500_config_port(struct uart_port *port, int flags) |
| 469 | { |
| 470 | port->type = PORT_VT8500; |
| 471 | } |
| 472 | |
| 473 | static int vt8500_verify_port(struct uart_port *port, |
| 474 | struct serial_struct *ser) |
| 475 | { |
| 476 | if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500)) |
| 477 | return -EINVAL; |
| 478 | if (unlikely(port->irq != ser->irq)) |
| 479 | return -EINVAL; |
| 480 | return 0; |
| 481 | } |
| 482 | |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 483 | static struct vt8500_port *vt8500_uart_ports[VT8500_MAX_PORTS]; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 484 | static struct uart_driver vt8500_uart_driver; |
| 485 | |
| 486 | #ifdef CONFIG_SERIAL_VT8500_CONSOLE |
| 487 | |
Denys Vlasenko | eba3b47 | 2015-10-27 18:46:44 +0100 | [diff] [blame] | 488 | static void wait_for_xmitr(struct uart_port *port) |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 489 | { |
| 490 | unsigned int status, tmout = 10000; |
| 491 | |
| 492 | /* Wait up to 10ms for the character(s) to be sent. */ |
| 493 | do { |
| 494 | status = vt8500_read(port, VT8500_URFIDX); |
| 495 | |
| 496 | if (--tmout == 0) |
| 497 | break; |
| 498 | udelay(1); |
| 499 | } while (status & 0x10); |
| 500 | } |
| 501 | |
| 502 | static void vt8500_console_putchar(struct uart_port *port, int c) |
| 503 | { |
| 504 | wait_for_xmitr(port); |
| 505 | writeb(c, port->membase + VT8500_TXFIFO); |
| 506 | } |
| 507 | |
| 508 | static void vt8500_console_write(struct console *co, const char *s, |
| 509 | unsigned int count) |
| 510 | { |
| 511 | struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index]; |
| 512 | unsigned long ier; |
| 513 | |
| 514 | BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr); |
| 515 | |
| 516 | ier = vt8500_read(&vt8500_port->uart, VT8500_URIER); |
| 517 | vt8500_write(&vt8500_port->uart, VT8500_URIER, 0); |
| 518 | |
| 519 | uart_console_write(&vt8500_port->uart, s, count, |
| 520 | vt8500_console_putchar); |
| 521 | |
| 522 | /* |
| 523 | * Finally, wait for transmitter to become empty |
| 524 | * and switch back to FIFO |
| 525 | */ |
| 526 | wait_for_xmitr(&vt8500_port->uart); |
| 527 | vt8500_write(&vt8500_port->uart, VT8500_URIER, ier); |
| 528 | } |
| 529 | |
| 530 | static int __init vt8500_console_setup(struct console *co, char *options) |
| 531 | { |
| 532 | struct vt8500_port *vt8500_port; |
| 533 | int baud = 9600; |
| 534 | int bits = 8; |
| 535 | int parity = 'n'; |
| 536 | int flow = 'n'; |
| 537 | |
| 538 | if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0)) |
| 539 | return -ENXIO; |
| 540 | |
| 541 | vt8500_port = vt8500_uart_ports[co->index]; |
| 542 | |
| 543 | if (!vt8500_port) |
| 544 | return -ENODEV; |
| 545 | |
| 546 | if (options) |
| 547 | uart_parse_options(options, &baud, &parity, &bits, &flow); |
| 548 | |
| 549 | return uart_set_options(&vt8500_port->uart, |
| 550 | co, baud, parity, bits, flow); |
| 551 | } |
| 552 | |
| 553 | static struct console vt8500_console = { |
| 554 | .name = "ttyWMT", |
| 555 | .write = vt8500_console_write, |
| 556 | .device = uart_console_device, |
| 557 | .setup = vt8500_console_setup, |
| 558 | .flags = CON_PRINTBUFFER, |
| 559 | .index = -1, |
| 560 | .data = &vt8500_uart_driver, |
| 561 | }; |
| 562 | |
| 563 | #define VT8500_CONSOLE (&vt8500_console) |
| 564 | |
| 565 | #else |
| 566 | #define VT8500_CONSOLE NULL |
| 567 | #endif |
| 568 | |
Alexey Charkov | 1db894e | 2014-09-06 21:21:15 +0400 | [diff] [blame] | 569 | #ifdef CONFIG_CONSOLE_POLL |
| 570 | static int vt8500_get_poll_char(struct uart_port *port) |
| 571 | { |
| 572 | unsigned int status = vt8500_read(port, VT8500_URFIDX); |
| 573 | |
| 574 | if (!(status & 0x1f00)) |
| 575 | return NO_POLL_CHAR; |
| 576 | |
| 577 | return vt8500_read(port, VT8500_RXFIFO) & 0xff; |
| 578 | } |
| 579 | |
| 580 | static void vt8500_put_poll_char(struct uart_port *port, unsigned char c) |
| 581 | { |
| 582 | unsigned int status, tmout = 10000; |
| 583 | |
| 584 | do { |
| 585 | status = vt8500_read(port, VT8500_URFIDX); |
| 586 | |
| 587 | if (--tmout == 0) |
| 588 | break; |
| 589 | udelay(1); |
| 590 | } while (status & 0x10); |
| 591 | |
| 592 | vt8500_write(port, c, VT8500_TXFIFO); |
| 593 | } |
| 594 | #endif |
| 595 | |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 596 | static struct uart_ops vt8500_uart_pops = { |
| 597 | .tx_empty = vt8500_tx_empty, |
| 598 | .set_mctrl = vt8500_set_mctrl, |
| 599 | .get_mctrl = vt8500_get_mctrl, |
| 600 | .stop_tx = vt8500_stop_tx, |
| 601 | .start_tx = vt8500_start_tx, |
| 602 | .stop_rx = vt8500_stop_rx, |
| 603 | .enable_ms = vt8500_enable_ms, |
| 604 | .break_ctl = vt8500_break_ctl, |
| 605 | .startup = vt8500_startup, |
| 606 | .shutdown = vt8500_shutdown, |
| 607 | .set_termios = vt8500_set_termios, |
| 608 | .type = vt8500_type, |
| 609 | .release_port = vt8500_release_port, |
| 610 | .request_port = vt8500_request_port, |
| 611 | .config_port = vt8500_config_port, |
| 612 | .verify_port = vt8500_verify_port, |
Alexey Charkov | 1db894e | 2014-09-06 21:21:15 +0400 | [diff] [blame] | 613 | #ifdef CONFIG_CONSOLE_POLL |
| 614 | .poll_get_char = vt8500_get_poll_char, |
| 615 | .poll_put_char = vt8500_put_poll_char, |
| 616 | #endif |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 617 | }; |
| 618 | |
| 619 | static struct uart_driver vt8500_uart_driver = { |
| 620 | .owner = THIS_MODULE, |
| 621 | .driver_name = "vt8500_serial", |
| 622 | .dev_name = "ttyWMT", |
| 623 | .nr = 6, |
| 624 | .cons = VT8500_CONSOLE, |
| 625 | }; |
| 626 | |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 627 | static unsigned int vt8500_flags; /* none required so far */ |
| 628 | static unsigned int wm8880_flags = VT8500_HAS_SWRTSCTS_SWITCH; |
| 629 | |
| 630 | static const struct of_device_id wmt_dt_ids[] = { |
| 631 | { .compatible = "via,vt8500-uart", .data = &vt8500_flags}, |
| 632 | { .compatible = "wm,wm8880-uart", .data = &wm8880_flags}, |
| 633 | {} |
| 634 | }; |
| 635 | |
Bill Pemberton | 9671f09 | 2012-11-19 13:21:50 -0500 | [diff] [blame] | 636 | static int vt8500_serial_probe(struct platform_device *pdev) |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 637 | { |
| 638 | struct vt8500_port *vt8500_port; |
| 639 | struct resource *mmres, *irqres; |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 640 | struct device_node *np = pdev->dev.of_node; |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 641 | const struct of_device_id *match; |
| 642 | const unsigned int *flags; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 643 | int ret; |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 644 | int port; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 645 | |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 646 | match = of_match_device(wmt_dt_ids, &pdev->dev); |
| 647 | if (!match) |
| 648 | return -EINVAL; |
| 649 | |
| 650 | flags = match->data; |
| 651 | |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 652 | mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 653 | irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| 654 | if (!mmres || !irqres) |
| 655 | return -ENODEV; |
| 656 | |
Roel Kluin | d969de8 | 2013-10-14 23:21:15 +0200 | [diff] [blame] | 657 | if (np) { |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 658 | port = of_alias_get_id(np, "serial"); |
Tony Prisk | 27dd2e0 | 2013-01-17 08:05:40 +1300 | [diff] [blame] | 659 | if (port >= VT8500_MAX_PORTS) |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 660 | port = -1; |
Roel Kluin | d969de8 | 2013-10-14 23:21:15 +0200 | [diff] [blame] | 661 | } else { |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 662 | port = -1; |
Roel Kluin | d969de8 | 2013-10-14 23:21:15 +0200 | [diff] [blame] | 663 | } |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 664 | |
| 665 | if (port < 0) { |
| 666 | /* calculate the port id */ |
| 667 | port = find_first_zero_bit(&vt8500_ports_in_use, |
| 668 | sizeof(vt8500_ports_in_use)); |
| 669 | } |
| 670 | |
Tony Prisk | 27dd2e0 | 2013-01-17 08:05:40 +1300 | [diff] [blame] | 671 | if (port >= VT8500_MAX_PORTS) |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 672 | return -ENODEV; |
| 673 | |
| 674 | /* reserve the port id */ |
| 675 | if (test_and_set_bit(port, &vt8500_ports_in_use)) { |
| 676 | /* port already in use - shouldn't really happen */ |
| 677 | return -EBUSY; |
| 678 | } |
| 679 | |
Tony Prisk | 49abd90 | 2013-01-18 15:05:32 +1300 | [diff] [blame] | 680 | vt8500_port = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_port), |
| 681 | GFP_KERNEL); |
Wei Yongjun | 59c2e85 | 2012-10-08 10:35:46 +0800 | [diff] [blame] | 682 | if (!vt8500_port) |
| 683 | return -ENOMEM; |
| 684 | |
Sachin Kamat | 82b2313 | 2013-03-04 14:24:39 +0530 | [diff] [blame] | 685 | vt8500_port->uart.membase = devm_ioremap_resource(&pdev->dev, mmres); |
| 686 | if (IS_ERR(vt8500_port->uart.membase)) |
| 687 | return PTR_ERR(vt8500_port->uart.membase); |
Tony Prisk | 12faa35 | 2013-01-18 15:05:31 +1300 | [diff] [blame] | 688 | |
| 689 | vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0); |
| 690 | if (IS_ERR(vt8500_port->clk)) { |
| 691 | dev_err(&pdev->dev, "failed to get clock\n"); |
Tony Prisk | 49abd90 | 2013-01-18 15:05:32 +1300 | [diff] [blame] | 692 | return -EINVAL; |
Tony Prisk | 12faa35 | 2013-01-18 15:05:31 +1300 | [diff] [blame] | 693 | } |
| 694 | |
| 695 | ret = clk_prepare_enable(vt8500_port->clk); |
| 696 | if (ret) { |
| 697 | dev_err(&pdev->dev, "failed to enable clock\n"); |
Tony Prisk | 49abd90 | 2013-01-18 15:05:32 +1300 | [diff] [blame] | 698 | return ret; |
Tony Prisk | 12faa35 | 2013-01-18 15:05:31 +1300 | [diff] [blame] | 699 | } |
| 700 | |
Alexey Charkov | ae38273 | 2014-09-06 21:21:12 +0400 | [diff] [blame] | 701 | vt8500_port->vt8500_uart_flags = *flags; |
Alexey Charkov | 5aa387c | 2014-09-06 21:21:14 +0400 | [diff] [blame] | 702 | vt8500_port->clk_predivisor = DIV_ROUND_CLOSEST( |
| 703 | clk_get_rate(vt8500_port->clk), |
| 704 | VT8500_RECOMMENDED_CLK |
| 705 | ); |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 706 | vt8500_port->uart.type = PORT_VT8500; |
| 707 | vt8500_port->uart.iotype = UPIO_MEM; |
| 708 | vt8500_port->uart.mapbase = mmres->start; |
| 709 | vt8500_port->uart.irq = irqres->start; |
| 710 | vt8500_port->uart.fifosize = 16; |
| 711 | vt8500_port->uart.ops = &vt8500_uart_pops; |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 712 | vt8500_port->uart.line = port; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 713 | vt8500_port->uart.dev = &pdev->dev; |
| 714 | vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 715 | |
Alexey Charkov | 5aa387c | 2014-09-06 21:21:14 +0400 | [diff] [blame] | 716 | /* Serial core uses the magic "16" everywhere - adjust for it */ |
| 717 | vt8500_port->uart.uartclk = 16 * clk_get_rate(vt8500_port->clk) / |
| 718 | vt8500_port->clk_predivisor / |
| 719 | VT8500_OVERSAMPLING_DIVISOR; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 720 | |
| 721 | snprintf(vt8500_port->name, sizeof(vt8500_port->name), |
| 722 | "VT8500 UART%d", pdev->id); |
| 723 | |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 724 | vt8500_uart_ports[port] = vt8500_port; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 725 | |
| 726 | uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart); |
| 727 | |
| 728 | platform_set_drvdata(pdev, vt8500_port); |
| 729 | |
| 730 | return 0; |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 731 | } |
| 732 | |
Bill Pemberton | ae8d8a1 | 2012-11-19 13:26:18 -0500 | [diff] [blame] | 733 | static int vt8500_serial_remove(struct platform_device *pdev) |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 734 | { |
| 735 | struct vt8500_port *vt8500_port = platform_get_drvdata(pdev); |
| 736 | |
Tony Prisk | 12faa35 | 2013-01-18 15:05:31 +1300 | [diff] [blame] | 737 | clk_disable_unprepare(vt8500_port->clk); |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 738 | uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart); |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 739 | |
| 740 | return 0; |
| 741 | } |
| 742 | |
| 743 | static struct platform_driver vt8500_platform_driver = { |
| 744 | .probe = vt8500_serial_probe, |
Bill Pemberton | 2d47b71 | 2012-11-19 13:21:34 -0500 | [diff] [blame] | 745 | .remove = vt8500_serial_remove, |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 746 | .driver = { |
| 747 | .name = "vt8500_serial", |
Sachin Kamat | 86c346d | 2013-05-22 17:06:29 +0530 | [diff] [blame] | 748 | .of_match_table = wmt_dt_ids, |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 749 | }, |
| 750 | }; |
| 751 | |
| 752 | static int __init vt8500_serial_init(void) |
| 753 | { |
| 754 | int ret; |
| 755 | |
| 756 | ret = uart_register_driver(&vt8500_uart_driver); |
| 757 | if (unlikely(ret)) |
| 758 | return ret; |
| 759 | |
| 760 | ret = platform_driver_register(&vt8500_platform_driver); |
| 761 | |
| 762 | if (unlikely(ret)) |
| 763 | uart_unregister_driver(&vt8500_uart_driver); |
| 764 | |
| 765 | return ret; |
| 766 | } |
| 767 | |
| 768 | static void __exit vt8500_serial_exit(void) |
| 769 | { |
| 770 | #ifdef CONFIG_SERIAL_VT8500_CONSOLE |
| 771 | unregister_console(&vt8500_console); |
| 772 | #endif |
| 773 | platform_driver_unregister(&vt8500_platform_driver); |
| 774 | uart_unregister_driver(&vt8500_uart_driver); |
| 775 | } |
| 776 | |
| 777 | module_init(vt8500_serial_init); |
| 778 | module_exit(vt8500_serial_exit); |
| 779 | |
| 780 | MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com>"); |
| 781 | MODULE_DESCRIPTION("Driver for vt8500 serial device"); |
Tony Prisk | 4001130 | 2012-08-03 20:56:25 +1200 | [diff] [blame] | 782 | MODULE_LICENSE("GPL v2"); |