blob: 00b2af211157b5513092e495d62a0a014a1e1c2f [file] [log] [blame]
Ralph Campbellf9315512010-05-23 21:44:54 -07001/*
2 * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
3 * All rights reserved.
4 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
5 *
6 * This software is available to you under a choice of one of two
7 * licenses. You may choose to be licensed under the terms of the GNU
8 * General Public License (GPL) Version 2, available from the file
9 * COPYING in the main directory of this source tree, or the
10 * OpenIB.org BSD license below:
11 *
12 * Redistribution and use in source and binary forms, with or
13 * without modification, are permitted provided that the following
14 * conditions are met:
15 *
16 * - Redistributions of source code must retain the above
17 * copyright notice, this list of conditions and the following
18 * disclaimer.
19 *
20 * - Redistributions in binary form must reproduce the above
21 * copyright notice, this list of conditions and the following
22 * disclaimer in the documentation and/or other materials
23 * provided with the distribution.
24 *
25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
32 * SOFTWARE.
33 */
34/*
35 * This file contains all of the code that is specific to the
36 * QLogic_IB 7220 chip (except that specific to the SerDes)
37 */
38
39#include <linux/interrupt.h>
40#include <linux/pci.h>
41#include <linux/delay.h>
Paul Gortmakere4dd23d2011-05-27 15:35:46 -040042#include <linux/module.h>
Ralph Campbellf9315512010-05-23 21:44:54 -070043#include <linux/io.h>
44#include <rdma/ib_verbs.h>
45
46#include "qib.h"
47#include "qib_7220.h"
48
49static void qib_setup_7220_setextled(struct qib_pportdata *, u32);
50static void qib_7220_handle_hwerrors(struct qib_devdata *, char *, size_t);
51static void sendctrl_7220_mod(struct qib_pportdata *ppd, u32 op);
52static u32 qib_7220_iblink_state(u64);
53static u8 qib_7220_phys_portstate(u64);
54static void qib_sdma_update_7220_tail(struct qib_pportdata *, u16);
55static void qib_set_ib_7220_lstate(struct qib_pportdata *, u16, u16);
56
57/*
58 * This file contains almost all the chip-specific register information and
59 * access functions for the QLogic QLogic_IB 7220 PCI-Express chip, with the
60 * exception of SerDes support, which in in qib_sd7220.c.
61 */
62
63/* Below uses machine-generated qib_chipnum_regs.h file */
64#define KREG_IDX(regname) (QIB_7220_##regname##_OFFS / sizeof(u64))
65
66/* Use defines to tie machine-generated names to lower-case names */
67#define kr_control KREG_IDX(Control)
68#define kr_counterregbase KREG_IDX(CntrRegBase)
69#define kr_errclear KREG_IDX(ErrClear)
70#define kr_errmask KREG_IDX(ErrMask)
71#define kr_errstatus KREG_IDX(ErrStatus)
72#define kr_extctrl KREG_IDX(EXTCtrl)
73#define kr_extstatus KREG_IDX(EXTStatus)
74#define kr_gpio_clear KREG_IDX(GPIOClear)
75#define kr_gpio_mask KREG_IDX(GPIOMask)
76#define kr_gpio_out KREG_IDX(GPIOOut)
77#define kr_gpio_status KREG_IDX(GPIOStatus)
78#define kr_hrtbt_guid KREG_IDX(HRTBT_GUID)
79#define kr_hwdiagctrl KREG_IDX(HwDiagCtrl)
80#define kr_hwerrclear KREG_IDX(HwErrClear)
81#define kr_hwerrmask KREG_IDX(HwErrMask)
82#define kr_hwerrstatus KREG_IDX(HwErrStatus)
83#define kr_ibcctrl KREG_IDX(IBCCtrl)
84#define kr_ibcddrctrl KREG_IDX(IBCDDRCtrl)
85#define kr_ibcddrstatus KREG_IDX(IBCDDRStatus)
86#define kr_ibcstatus KREG_IDX(IBCStatus)
87#define kr_ibserdesctrl KREG_IDX(IBSerDesCtrl)
88#define kr_intclear KREG_IDX(IntClear)
89#define kr_intmask KREG_IDX(IntMask)
90#define kr_intstatus KREG_IDX(IntStatus)
91#define kr_ncmodectrl KREG_IDX(IBNCModeCtrl)
92#define kr_palign KREG_IDX(PageAlign)
93#define kr_partitionkey KREG_IDX(RcvPartitionKey)
94#define kr_portcnt KREG_IDX(PortCnt)
95#define kr_rcvbthqp KREG_IDX(RcvBTHQP)
96#define kr_rcvctrl KREG_IDX(RcvCtrl)
97#define kr_rcvegrbase KREG_IDX(RcvEgrBase)
98#define kr_rcvegrcnt KREG_IDX(RcvEgrCnt)
99#define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt)
100#define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize)
101#define kr_rcvhdrsize KREG_IDX(RcvHdrSize)
102#define kr_rcvpktledcnt KREG_IDX(RcvPktLEDCnt)
103#define kr_rcvtidbase KREG_IDX(RcvTIDBase)
104#define kr_rcvtidcnt KREG_IDX(RcvTIDCnt)
105#define kr_revision KREG_IDX(Revision)
106#define kr_scratch KREG_IDX(Scratch)
107#define kr_sendbuffererror KREG_IDX(SendBufErr0)
108#define kr_sendctrl KREG_IDX(SendCtrl)
109#define kr_senddmabase KREG_IDX(SendDmaBase)
110#define kr_senddmabufmask0 KREG_IDX(SendDmaBufMask0)
111#define kr_senddmabufmask1 (KREG_IDX(SendDmaBufMask0) + 1)
112#define kr_senddmabufmask2 (KREG_IDX(SendDmaBufMask0) + 2)
113#define kr_senddmahead KREG_IDX(SendDmaHead)
114#define kr_senddmaheadaddr KREG_IDX(SendDmaHeadAddr)
115#define kr_senddmalengen KREG_IDX(SendDmaLenGen)
116#define kr_senddmastatus KREG_IDX(SendDmaStatus)
117#define kr_senddmatail KREG_IDX(SendDmaTail)
118#define kr_sendpioavailaddr KREG_IDX(SendBufAvailAddr)
119#define kr_sendpiobufbase KREG_IDX(SendBufBase)
120#define kr_sendpiobufcnt KREG_IDX(SendBufCnt)
121#define kr_sendpiosize KREG_IDX(SendBufSize)
122#define kr_sendregbase KREG_IDX(SendRegBase)
123#define kr_userregbase KREG_IDX(UserRegBase)
124#define kr_xgxs_cfg KREG_IDX(XGXSCfg)
125
126/* These must only be written via qib_write_kreg_ctxt() */
127#define kr_rcvhdraddr KREG_IDX(RcvHdrAddr0)
128#define kr_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0)
129
130
131#define CREG_IDX(regname) ((QIB_7220_##regname##_OFFS - \
132 QIB_7220_LBIntCnt_OFFS) / sizeof(u64))
133
134#define cr_badformat CREG_IDX(RxVersionErrCnt)
135#define cr_erricrc CREG_IDX(RxICRCErrCnt)
136#define cr_errlink CREG_IDX(RxLinkMalformCnt)
137#define cr_errlpcrc CREG_IDX(RxLPCRCErrCnt)
138#define cr_errpkey CREG_IDX(RxPKeyMismatchCnt)
139#define cr_rcvflowctrl_err CREG_IDX(RxFlowCtrlViolCnt)
140#define cr_err_rlen CREG_IDX(RxLenErrCnt)
141#define cr_errslen CREG_IDX(TxLenErrCnt)
142#define cr_errtidfull CREG_IDX(RxTIDFullErrCnt)
143#define cr_errtidvalid CREG_IDX(RxTIDValidErrCnt)
144#define cr_errvcrc CREG_IDX(RxVCRCErrCnt)
145#define cr_ibstatuschange CREG_IDX(IBStatusChangeCnt)
146#define cr_lbint CREG_IDX(LBIntCnt)
147#define cr_invalidrlen CREG_IDX(RxMaxMinLenErrCnt)
148#define cr_invalidslen CREG_IDX(TxMaxMinLenErrCnt)
149#define cr_lbflowstall CREG_IDX(LBFlowStallCnt)
150#define cr_pktrcv CREG_IDX(RxDataPktCnt)
151#define cr_pktrcvflowctrl CREG_IDX(RxFlowPktCnt)
152#define cr_pktsend CREG_IDX(TxDataPktCnt)
153#define cr_pktsendflow CREG_IDX(TxFlowPktCnt)
154#define cr_portovfl CREG_IDX(RxP0HdrEgrOvflCnt)
155#define cr_rcvebp CREG_IDX(RxEBPCnt)
156#define cr_rcvovfl CREG_IDX(RxBufOvflCnt)
157#define cr_senddropped CREG_IDX(TxDroppedPktCnt)
158#define cr_sendstall CREG_IDX(TxFlowStallCnt)
159#define cr_sendunderrun CREG_IDX(TxUnderrunCnt)
160#define cr_wordrcv CREG_IDX(RxDwordCnt)
161#define cr_wordsend CREG_IDX(TxDwordCnt)
162#define cr_txunsupvl CREG_IDX(TxUnsupVLErrCnt)
163#define cr_rxdroppkt CREG_IDX(RxDroppedPktCnt)
164#define cr_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt)
165#define cr_iblinkdown CREG_IDX(IBLinkDownedCnt)
166#define cr_ibsymbolerr CREG_IDX(IBSymbolErrCnt)
167#define cr_vl15droppedpkt CREG_IDX(RxVL15DroppedPktCnt)
168#define cr_rxotherlocalphyerr CREG_IDX(RxOtherLocalPhyErrCnt)
169#define cr_excessbufferovfl CREG_IDX(ExcessBufferOvflCnt)
170#define cr_locallinkintegrityerr CREG_IDX(LocalLinkIntegrityErrCnt)
171#define cr_rxvlerr CREG_IDX(RxVlErrCnt)
172#define cr_rxdlidfltr CREG_IDX(RxDlidFltrCnt)
173#define cr_psstat CREG_IDX(PSStat)
174#define cr_psstart CREG_IDX(PSStart)
175#define cr_psinterval CREG_IDX(PSInterval)
176#define cr_psrcvdatacount CREG_IDX(PSRcvDataCount)
177#define cr_psrcvpktscount CREG_IDX(PSRcvPktsCount)
178#define cr_psxmitdatacount CREG_IDX(PSXmitDataCount)
179#define cr_psxmitpktscount CREG_IDX(PSXmitPktsCount)
180#define cr_psxmitwaitcount CREG_IDX(PSXmitWaitCount)
181#define cr_txsdmadesc CREG_IDX(TxSDmaDescCnt)
182#define cr_pcieretrydiag CREG_IDX(PcieRetryBufDiagQwordCnt)
183
184#define SYM_RMASK(regname, fldname) ((u64) \
185 QIB_7220_##regname##_##fldname##_RMASK)
186#define SYM_MASK(regname, fldname) ((u64) \
187 QIB_7220_##regname##_##fldname##_RMASK << \
188 QIB_7220_##regname##_##fldname##_LSB)
189#define SYM_LSB(regname, fldname) (QIB_7220_##regname##_##fldname##_LSB)
190#define SYM_FIELD(value, regname, fldname) ((u64) \
191 (((value) >> SYM_LSB(regname, fldname)) & \
192 SYM_RMASK(regname, fldname)))
193#define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask)
194#define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask)
195
196/* ibcctrl bits */
197#define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1
198/* cycle through TS1/TS2 till OK */
199#define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2
200/* wait for TS1, then go on */
201#define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3
202#define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16
203
204#define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */
205#define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
206#define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
207
208#define BLOB_7220_IBCHG 0x81
209
210/*
211 * We could have a single register get/put routine, that takes a group type,
212 * but this is somewhat clearer and cleaner. It also gives us some error
213 * checking. 64 bit register reads should always work, but are inefficient
214 * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
215 * so we use kreg32 wherever possible. User register and counter register
216 * reads are always 32 bit reads, so only one form of those routines.
217 */
218
219/**
220 * qib_read_ureg32 - read 32-bit virtualized per-context register
221 * @dd: device
222 * @regno: register number
223 * @ctxt: context number
224 *
225 * Return the contents of a register that is virtualized to be per context.
226 * Returns -1 on errors (not distinguishable from valid contents at
227 * runtime; we may add a separate error variable at some point).
228 */
229static inline u32 qib_read_ureg32(const struct qib_devdata *dd,
230 enum qib_ureg regno, int ctxt)
231{
232 if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
233 return 0;
234
235 if (dd->userbase)
236 return readl(regno + (u64 __iomem *)
237 ((char __iomem *)dd->userbase +
238 dd->ureg_align * ctxt));
239 else
240 return readl(regno + (u64 __iomem *)
241 (dd->uregbase +
242 (char __iomem *)dd->kregbase +
243 dd->ureg_align * ctxt));
244}
245
246/**
247 * qib_write_ureg - write 32-bit virtualized per-context register
248 * @dd: device
249 * @regno: register number
250 * @value: value
251 * @ctxt: context
252 *
253 * Write the contents of a register that is virtualized to be per context.
254 */
255static inline void qib_write_ureg(const struct qib_devdata *dd,
256 enum qib_ureg regno, u64 value, int ctxt)
257{
258 u64 __iomem *ubase;
259
260 if (dd->userbase)
261 ubase = (u64 __iomem *)
262 ((char __iomem *) dd->userbase +
263 dd->ureg_align * ctxt);
264 else
265 ubase = (u64 __iomem *)
266 (dd->uregbase +
267 (char __iomem *) dd->kregbase +
268 dd->ureg_align * ctxt);
269
270 if (dd->kregbase && (dd->flags & QIB_PRESENT))
271 writeq(value, &ubase[regno]);
272}
273
274/**
275 * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register
276 * @dd: the qlogic_ib device
277 * @regno: the register number to write
278 * @ctxt: the context containing the register
279 * @value: the value to write
280 */
281static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd,
282 const u16 regno, unsigned ctxt,
283 u64 value)
284{
285 qib_write_kreg(dd, regno + ctxt, value);
286}
287
288static inline void write_7220_creg(const struct qib_devdata *dd,
289 u16 regno, u64 value)
290{
291 if (dd->cspec->cregbase && (dd->flags & QIB_PRESENT))
292 writeq(value, &dd->cspec->cregbase[regno]);
293}
294
295static inline u64 read_7220_creg(const struct qib_devdata *dd, u16 regno)
296{
297 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
298 return 0;
299 return readq(&dd->cspec->cregbase[regno]);
300}
301
302static inline u32 read_7220_creg32(const struct qib_devdata *dd, u16 regno)
303{
304 if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
305 return 0;
306 return readl(&dd->cspec->cregbase[regno]);
307}
308
309/* kr_revision bits */
310#define QLOGIC_IB_R_EMULATORREV_MASK ((1ULL << 22) - 1)
311#define QLOGIC_IB_R_EMULATORREV_SHIFT 40
312
313/* kr_control bits */
314#define QLOGIC_IB_C_RESET (1U << 7)
315
316/* kr_intstatus, kr_intclear, kr_intmask bits */
317#define QLOGIC_IB_I_RCVURG_MASK ((1ULL << 17) - 1)
318#define QLOGIC_IB_I_RCVURG_SHIFT 32
319#define QLOGIC_IB_I_RCVAVAIL_MASK ((1ULL << 17) - 1)
320#define QLOGIC_IB_I_RCVAVAIL_SHIFT 0
321#define QLOGIC_IB_I_SERDESTRIMDONE (1ULL << 27)
322
323#define QLOGIC_IB_C_FREEZEMODE 0x00000002
324#define QLOGIC_IB_C_LINKENABLE 0x00000004
325
326#define QLOGIC_IB_I_SDMAINT 0x8000000000000000ULL
327#define QLOGIC_IB_I_SDMADISABLED 0x4000000000000000ULL
328#define QLOGIC_IB_I_ERROR 0x0000000080000000ULL
329#define QLOGIC_IB_I_SPIOSENT 0x0000000040000000ULL
330#define QLOGIC_IB_I_SPIOBUFAVAIL 0x0000000020000000ULL
331#define QLOGIC_IB_I_GPIO 0x0000000010000000ULL
332
333/* variables for sanity checking interrupt and errors */
334#define QLOGIC_IB_I_BITSEXTANT \
335 (QLOGIC_IB_I_SDMAINT | QLOGIC_IB_I_SDMADISABLED | \
336 (QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT) | \
337 (QLOGIC_IB_I_RCVAVAIL_MASK << \
338 QLOGIC_IB_I_RCVAVAIL_SHIFT) | \
339 QLOGIC_IB_I_ERROR | QLOGIC_IB_I_SPIOSENT | \
340 QLOGIC_IB_I_SPIOBUFAVAIL | QLOGIC_IB_I_GPIO | \
341 QLOGIC_IB_I_SERDESTRIMDONE)
342
343#define IB_HWE_BITSEXTANT \
344 (HWE_MASK(RXEMemParityErr) | \
345 HWE_MASK(TXEMemParityErr) | \
346 (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK << \
347 QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) | \
348 QLOGIC_IB_HWE_PCIE1PLLFAILED | \
349 QLOGIC_IB_HWE_PCIE0PLLFAILED | \
350 QLOGIC_IB_HWE_PCIEPOISONEDTLP | \
351 QLOGIC_IB_HWE_PCIECPLTIMEOUT | \
352 QLOGIC_IB_HWE_PCIEBUSPARITYXTLH | \
353 QLOGIC_IB_HWE_PCIEBUSPARITYXADM | \
354 QLOGIC_IB_HWE_PCIEBUSPARITYRADM | \
355 HWE_MASK(PowerOnBISTFailed) | \
356 QLOGIC_IB_HWE_COREPLL_FBSLIP | \
357 QLOGIC_IB_HWE_COREPLL_RFSLIP | \
358 QLOGIC_IB_HWE_SERDESPLLFAILED | \
359 HWE_MASK(IBCBusToSPCParityErr) | \
360 HWE_MASK(IBCBusFromSPCParityErr) | \
361 QLOGIC_IB_HWE_PCIECPLDATAQUEUEERR | \
362 QLOGIC_IB_HWE_PCIECPLHDRQUEUEERR | \
363 QLOGIC_IB_HWE_SDMAMEMREADERR | \
364 QLOGIC_IB_HWE_CLK_UC_PLLNOTLOCKED | \
365 QLOGIC_IB_HWE_PCIESERDESQ0PCLKNOTDETECT | \
366 QLOGIC_IB_HWE_PCIESERDESQ1PCLKNOTDETECT | \
367 QLOGIC_IB_HWE_PCIESERDESQ2PCLKNOTDETECT | \
368 QLOGIC_IB_HWE_PCIESERDESQ3PCLKNOTDETECT | \
369 QLOGIC_IB_HWE_DDSRXEQMEMORYPARITYERR | \
370 QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR | \
371 QLOGIC_IB_HWE_PCIE_UC_OCT0MEMORYPARITYERR | \
372 QLOGIC_IB_HWE_PCIE_UC_OCT1MEMORYPARITYERR)
373
374#define IB_E_BITSEXTANT \
375 (ERR_MASK(RcvFormatErr) | ERR_MASK(RcvVCRCErr) | \
376 ERR_MASK(RcvICRCErr) | ERR_MASK(RcvMinPktLenErr) | \
377 ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvLongPktLenErr) | \
378 ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvUnexpectedCharErr) | \
379 ERR_MASK(RcvUnsupportedVLErr) | ERR_MASK(RcvEBPErr) | \
380 ERR_MASK(RcvIBFlowErr) | ERR_MASK(RcvBadVersionErr) | \
381 ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) | \
382 ERR_MASK(RcvBadTidErr) | ERR_MASK(RcvHdrLenErr) | \
383 ERR_MASK(RcvHdrErr) | ERR_MASK(RcvIBLostLinkErr) | \
384 ERR_MASK(SendSpecialTriggerErr) | \
385 ERR_MASK(SDmaDisabledErr) | ERR_MASK(SendMinPktLenErr) | \
386 ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendUnderRunErr) | \
387 ERR_MASK(SendPktLenErr) | ERR_MASK(SendDroppedSmpPktErr) | \
388 ERR_MASK(SendDroppedDataPktErr) | \
389 ERR_MASK(SendPioArmLaunchErr) | \
390 ERR_MASK(SendUnexpectedPktNumErr) | \
391 ERR_MASK(SendUnsupportedVLErr) | ERR_MASK(SendBufMisuseErr) | \
392 ERR_MASK(SDmaGenMismatchErr) | ERR_MASK(SDmaOutOfBoundErr) | \
393 ERR_MASK(SDmaTailOutOfBoundErr) | ERR_MASK(SDmaBaseErr) | \
394 ERR_MASK(SDma1stDescErr) | ERR_MASK(SDmaRpyTagErr) | \
395 ERR_MASK(SDmaDwEnErr) | ERR_MASK(SDmaMissingDwErr) | \
396 ERR_MASK(SDmaUnexpDataErr) | \
397 ERR_MASK(IBStatusChanged) | ERR_MASK(InvalidAddrErr) | \
398 ERR_MASK(ResetNegated) | ERR_MASK(HardwareErr) | \
399 ERR_MASK(SDmaDescAddrMisalignErr) | \
400 ERR_MASK(InvalidEEPCmd))
401
402/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
403#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK 0x00000000000000ffULL
404#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT 0
405#define QLOGIC_IB_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL
406#define QLOGIC_IB_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL
407#define QLOGIC_IB_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL
408#define QLOGIC_IB_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL
409#define QLOGIC_IB_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL
410#define QLOGIC_IB_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
411#define QLOGIC_IB_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
412#define QLOGIC_IB_HWE_PCIE1PLLFAILED 0x0400000000000000ULL
413#define QLOGIC_IB_HWE_PCIE0PLLFAILED 0x0800000000000000ULL
414#define QLOGIC_IB_HWE_SERDESPLLFAILED 0x1000000000000000ULL
415/* specific to this chip */
416#define QLOGIC_IB_HWE_PCIECPLDATAQUEUEERR 0x0000000000000040ULL
417#define QLOGIC_IB_HWE_PCIECPLHDRQUEUEERR 0x0000000000000080ULL
418#define QLOGIC_IB_HWE_SDMAMEMREADERR 0x0000000010000000ULL
419#define QLOGIC_IB_HWE_CLK_UC_PLLNOTLOCKED 0x2000000000000000ULL
420#define QLOGIC_IB_HWE_PCIESERDESQ0PCLKNOTDETECT 0x0100000000000000ULL
421#define QLOGIC_IB_HWE_PCIESERDESQ1PCLKNOTDETECT 0x0200000000000000ULL
422#define QLOGIC_IB_HWE_PCIESERDESQ2PCLKNOTDETECT 0x0400000000000000ULL
423#define QLOGIC_IB_HWE_PCIESERDESQ3PCLKNOTDETECT 0x0800000000000000ULL
424#define QLOGIC_IB_HWE_DDSRXEQMEMORYPARITYERR 0x0000008000000000ULL
425#define QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR 0x0000004000000000ULL
426#define QLOGIC_IB_HWE_PCIE_UC_OCT0MEMORYPARITYERR 0x0000001000000000ULL
427#define QLOGIC_IB_HWE_PCIE_UC_OCT1MEMORYPARITYERR 0x0000002000000000ULL
428
429#define IBA7220_IBCC_LINKCMD_SHIFT 19
430
431/* kr_ibcddrctrl bits */
432#define IBA7220_IBC_DLIDLMC_MASK 0xFFFFFFFFUL
433#define IBA7220_IBC_DLIDLMC_SHIFT 32
434
435#define IBA7220_IBC_HRTBT_MASK (SYM_RMASK(IBCDDRCtrl, HRTBT_AUTO) | \
436 SYM_RMASK(IBCDDRCtrl, HRTBT_ENB))
437#define IBA7220_IBC_HRTBT_SHIFT SYM_LSB(IBCDDRCtrl, HRTBT_ENB)
438
439#define IBA7220_IBC_LANE_REV_SUPPORTED (1<<8)
440#define IBA7220_IBC_LREV_MASK 1
441#define IBA7220_IBC_LREV_SHIFT 8
442#define IBA7220_IBC_RXPOL_MASK 1
443#define IBA7220_IBC_RXPOL_SHIFT 7
444#define IBA7220_IBC_WIDTH_SHIFT 5
445#define IBA7220_IBC_WIDTH_MASK 0x3
446#define IBA7220_IBC_WIDTH_1X_ONLY (0 << IBA7220_IBC_WIDTH_SHIFT)
447#define IBA7220_IBC_WIDTH_4X_ONLY (1 << IBA7220_IBC_WIDTH_SHIFT)
448#define IBA7220_IBC_WIDTH_AUTONEG (2 << IBA7220_IBC_WIDTH_SHIFT)
449#define IBA7220_IBC_SPEED_AUTONEG (1 << 1)
450#define IBA7220_IBC_SPEED_SDR (1 << 2)
451#define IBA7220_IBC_SPEED_DDR (1 << 3)
452#define IBA7220_IBC_SPEED_AUTONEG_MASK (0x7 << 1)
453#define IBA7220_IBC_IBTA_1_2_MASK (1)
454
455/* kr_ibcddrstatus */
456/* link latency shift is 0, don't bother defining */
457#define IBA7220_DDRSTAT_LINKLAT_MASK 0x3ffffff
458
459/* kr_extstatus bits */
460#define QLOGIC_IB_EXTS_FREQSEL 0x2
461#define QLOGIC_IB_EXTS_SERDESSEL 0x4
462#define QLOGIC_IB_EXTS_MEMBIST_ENDTEST 0x0000000000004000
463#define QLOGIC_IB_EXTS_MEMBIST_DISABLED 0x0000000000008000
464
465/* kr_xgxsconfig bits */
466#define QLOGIC_IB_XGXS_RESET 0x5ULL
467#define QLOGIC_IB_XGXS_FC_SAFE (1ULL << 63)
468
469/* kr_rcvpktledcnt */
470#define IBA7220_LEDBLINK_ON_SHIFT 32 /* 4ns period on after packet */
471#define IBA7220_LEDBLINK_OFF_SHIFT 0 /* 4ns period off before next on */
472
473#define _QIB_GPIO_SDA_NUM 1
474#define _QIB_GPIO_SCL_NUM 0
475#define QIB_TWSI_EEPROM_DEV 0xA2 /* All Production 7220 cards. */
476#define QIB_TWSI_TEMP_DEV 0x98
477
478/* HW counter clock is at 4nsec */
479#define QIB_7220_PSXMITWAIT_CHECK_RATE 4000
480
481#define IBA7220_R_INTRAVAIL_SHIFT 17
482#define IBA7220_R_PKEY_DIS_SHIFT 34
483#define IBA7220_R_TAILUPD_SHIFT 35
484#define IBA7220_R_CTXTCFG_SHIFT 36
485
486#define IBA7220_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */
487
488/*
489 * the size bits give us 2^N, in KB units. 0 marks as invalid,
490 * and 7 is reserved. We currently use only 2KB and 4KB
491 */
492#define IBA7220_TID_SZ_SHIFT 37 /* shift to 3bit size selector */
493#define IBA7220_TID_SZ_2K (1UL << IBA7220_TID_SZ_SHIFT) /* 2KB */
494#define IBA7220_TID_SZ_4K (2UL << IBA7220_TID_SZ_SHIFT) /* 4KB */
495#define IBA7220_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */
496#define PBC_7220_VL15_SEND (1ULL << 63) /* pbc; VL15, no credit check */
497#define PBC_7220_VL15_SEND_CTRL (1ULL << 31) /* control version of same */
498
499#define AUTONEG_TRIES 5 /* sequential retries to negotiate DDR */
500
501/* packet rate matching delay multiplier */
502static u8 rate_to_delay[2][2] = {
503 /* 1x, 4x */
504 { 8, 2 }, /* SDR */
505 { 4, 1 } /* DDR */
506};
507
508static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = {
509 [IB_RATE_2_5_GBPS] = 8,
510 [IB_RATE_5_GBPS] = 4,
511 [IB_RATE_10_GBPS] = 2,
512 [IB_RATE_20_GBPS] = 1
513};
514
515#define IBA7220_LINKSPEED_SHIFT SYM_LSB(IBCStatus, LinkSpeedActive)
516#define IBA7220_LINKWIDTH_SHIFT SYM_LSB(IBCStatus, LinkWidthActive)
517
518/* link training states, from IBC */
519#define IB_7220_LT_STATE_DISABLED 0x00
520#define IB_7220_LT_STATE_LINKUP 0x01
521#define IB_7220_LT_STATE_POLLACTIVE 0x02
522#define IB_7220_LT_STATE_POLLQUIET 0x03
523#define IB_7220_LT_STATE_SLEEPDELAY 0x04
524#define IB_7220_LT_STATE_SLEEPQUIET 0x05
525#define IB_7220_LT_STATE_CFGDEBOUNCE 0x08
526#define IB_7220_LT_STATE_CFGRCVFCFG 0x09
527#define IB_7220_LT_STATE_CFGWAITRMT 0x0a
528#define IB_7220_LT_STATE_CFGIDLE 0x0b
529#define IB_7220_LT_STATE_RECOVERRETRAIN 0x0c
530#define IB_7220_LT_STATE_RECOVERWAITRMT 0x0e
531#define IB_7220_LT_STATE_RECOVERIDLE 0x0f
532
533/* link state machine states from IBC */
534#define IB_7220_L_STATE_DOWN 0x0
535#define IB_7220_L_STATE_INIT 0x1
536#define IB_7220_L_STATE_ARM 0x2
537#define IB_7220_L_STATE_ACTIVE 0x3
538#define IB_7220_L_STATE_ACT_DEFER 0x4
539
540static const u8 qib_7220_physportstate[0x20] = {
541 [IB_7220_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED,
542 [IB_7220_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP,
543 [IB_7220_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL,
544 [IB_7220_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL,
545 [IB_7220_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP,
546 [IB_7220_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP,
547 [IB_7220_LT_STATE_CFGDEBOUNCE] =
548 IB_PHYSPORTSTATE_CFG_TRAIN,
549 [IB_7220_LT_STATE_CFGRCVFCFG] =
550 IB_PHYSPORTSTATE_CFG_TRAIN,
551 [IB_7220_LT_STATE_CFGWAITRMT] =
552 IB_PHYSPORTSTATE_CFG_TRAIN,
553 [IB_7220_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN,
554 [IB_7220_LT_STATE_RECOVERRETRAIN] =
555 IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
556 [IB_7220_LT_STATE_RECOVERWAITRMT] =
557 IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
558 [IB_7220_LT_STATE_RECOVERIDLE] =
559 IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
560 [0x10] = IB_PHYSPORTSTATE_CFG_TRAIN,
561 [0x11] = IB_PHYSPORTSTATE_CFG_TRAIN,
562 [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
563 [0x13] = IB_PHYSPORTSTATE_CFG_TRAIN,
564 [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
565 [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
566 [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
567 [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN
568};
569
570int qib_special_trigger;
571module_param_named(special_trigger, qib_special_trigger, int, S_IRUGO);
572MODULE_PARM_DESC(special_trigger, "Enable SpecialTrigger arm/launch");
573
574#define IBCBUSFRSPCPARITYERR HWE_MASK(IBCBusFromSPCParityErr)
575#define IBCBUSTOSPCPARITYERR HWE_MASK(IBCBusToSPCParityErr)
576
577#define SYM_MASK_BIT(regname, fldname, bit) ((u64) \
578 (1ULL << (SYM_LSB(regname, fldname) + (bit))))
579
580#define TXEMEMPARITYERR_PIOBUF \
581 SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 0)
582#define TXEMEMPARITYERR_PIOPBC \
583 SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 1)
584#define TXEMEMPARITYERR_PIOLAUNCHFIFO \
585 SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 2)
586
587#define RXEMEMPARITYERR_RCVBUF \
588 SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 0)
589#define RXEMEMPARITYERR_LOOKUPQ \
590 SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 1)
591#define RXEMEMPARITYERR_EXPTID \
592 SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 2)
593#define RXEMEMPARITYERR_EAGERTID \
594 SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 3)
595#define RXEMEMPARITYERR_FLAGBUF \
596 SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 4)
597#define RXEMEMPARITYERR_DATAINFO \
598 SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 5)
599#define RXEMEMPARITYERR_HDRINFO \
600 SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 6)
601
602/* 7220 specific hardware errors... */
603static const struct qib_hwerror_msgs qib_7220_hwerror_msgs[] = {
604 /* generic hardware errors */
605 QLOGIC_IB_HWE_MSG(IBCBUSFRSPCPARITYERR, "QIB2IB Parity"),
606 QLOGIC_IB_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2QIB Parity"),
607
608 QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOBUF,
609 "TXE PIOBUF Memory Parity"),
610 QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOPBC,
611 "TXE PIOPBC Memory Parity"),
612 QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOLAUNCHFIFO,
613 "TXE PIOLAUNCHFIFO Memory Parity"),
614
615 QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_RCVBUF,
616 "RXE RCVBUF Memory Parity"),
617 QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_LOOKUPQ,
618 "RXE LOOKUPQ Memory Parity"),
619 QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EAGERTID,
620 "RXE EAGERTID Memory Parity"),
621 QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EXPTID,
622 "RXE EXPTID Memory Parity"),
623 QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_FLAGBUF,
624 "RXE FLAGBUF Memory Parity"),
625 QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_DATAINFO,
626 "RXE DATAINFO Memory Parity"),
627 QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_HDRINFO,
628 "RXE HDRINFO Memory Parity"),
629
630 /* chip-specific hardware errors */
631 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEPOISONEDTLP,
632 "PCIe Poisoned TLP"),
633 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLTIMEOUT,
634 "PCIe completion timeout"),
635 /*
636 * In practice, it's unlikely wthat we'll see PCIe PLL, or bus
637 * parity or memory parity error failures, because most likely we
638 * won't be able to talk to the core of the chip. Nonetheless, we
639 * might see them, if they are in parts of the PCIe core that aren't
640 * essential.
641 */
642 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE1PLLFAILED,
643 "PCIePLL1"),
644 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE0PLLFAILED,
645 "PCIePLL0"),
646 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXTLH,
647 "PCIe XTLH core parity"),
648 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXADM,
649 "PCIe ADM TX core parity"),
650 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYRADM,
651 "PCIe ADM RX core parity"),
652 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_SERDESPLLFAILED,
653 "SerDes PLL"),
654 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLDATAQUEUEERR,
655 "PCIe cpl header queue"),
656 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLHDRQUEUEERR,
657 "PCIe cpl data queue"),
658 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_SDMAMEMREADERR,
659 "Send DMA memory read"),
660 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_CLK_UC_PLLNOTLOCKED,
661 "uC PLL clock not locked"),
662 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ0PCLKNOTDETECT,
663 "PCIe serdes Q0 no clock"),
664 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ1PCLKNOTDETECT,
665 "PCIe serdes Q1 no clock"),
666 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ2PCLKNOTDETECT,
667 "PCIe serdes Q2 no clock"),
668 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIESERDESQ3PCLKNOTDETECT,
669 "PCIe serdes Q3 no clock"),
670 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_DDSRXEQMEMORYPARITYERR,
671 "DDS RXEQ memory parity"),
672 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR,
673 "IB uC memory parity"),
674 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE_UC_OCT0MEMORYPARITYERR,
675 "PCIe uC oct0 memory parity"),
676 QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE_UC_OCT1MEMORYPARITYERR,
677 "PCIe uC oct1 memory parity"),
678};
679
680#define RXE_PARITY (RXEMEMPARITYERR_EAGERTID|RXEMEMPARITYERR_EXPTID)
681
682#define QLOGIC_IB_E_PKTERRS (\
683 ERR_MASK(SendPktLenErr) | \
684 ERR_MASK(SendDroppedDataPktErr) | \
685 ERR_MASK(RcvVCRCErr) | \
686 ERR_MASK(RcvICRCErr) | \
687 ERR_MASK(RcvShortPktLenErr) | \
688 ERR_MASK(RcvEBPErr))
689
690/* Convenience for decoding Send DMA errors */
691#define QLOGIC_IB_E_SDMAERRS ( \
692 ERR_MASK(SDmaGenMismatchErr) | \
693 ERR_MASK(SDmaOutOfBoundErr) | \
694 ERR_MASK(SDmaTailOutOfBoundErr) | ERR_MASK(SDmaBaseErr) | \
695 ERR_MASK(SDma1stDescErr) | ERR_MASK(SDmaRpyTagErr) | \
696 ERR_MASK(SDmaDwEnErr) | ERR_MASK(SDmaMissingDwErr) | \
697 ERR_MASK(SDmaUnexpDataErr) | \
698 ERR_MASK(SDmaDescAddrMisalignErr) | \
699 ERR_MASK(SDmaDisabledErr) | \
700 ERR_MASK(SendBufMisuseErr))
701
702/* These are all rcv-related errors which we want to count for stats */
703#define E_SUM_PKTERRS \
704 (ERR_MASK(RcvHdrLenErr) | ERR_MASK(RcvBadTidErr) | \
705 ERR_MASK(RcvBadVersionErr) | ERR_MASK(RcvHdrErr) | \
706 ERR_MASK(RcvLongPktLenErr) | ERR_MASK(RcvShortPktLenErr) | \
707 ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \
708 ERR_MASK(RcvFormatErr) | ERR_MASK(RcvUnsupportedVLErr) | \
709 ERR_MASK(RcvUnexpectedCharErr) | ERR_MASK(RcvEBPErr))
710
711/* These are all send-related errors which we want to count for stats */
712#define E_SUM_ERRS \
713 (ERR_MASK(SendPioArmLaunchErr) | ERR_MASK(SendUnexpectedPktNumErr) | \
714 ERR_MASK(SendDroppedDataPktErr) | ERR_MASK(SendDroppedSmpPktErr) | \
715 ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendUnsupportedVLErr) | \
716 ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \
717 ERR_MASK(InvalidAddrErr))
718
719/*
720 * this is similar to E_SUM_ERRS, but can't ignore armlaunch, don't ignore
721 * errors not related to freeze and cancelling buffers. Can't ignore
722 * armlaunch because could get more while still cleaning up, and need
723 * to cancel those as they happen.
724 */
725#define E_SPKT_ERRS_IGNORE \
726 (ERR_MASK(SendDroppedDataPktErr) | ERR_MASK(SendDroppedSmpPktErr) | \
727 ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendMinPktLenErr) | \
728 ERR_MASK(SendPktLenErr))
729
730/*
731 * these are errors that can occur when the link changes state while
732 * a packet is being sent or received. This doesn't cover things
733 * like EBP or VCRC that can be the result of a sending having the
734 * link change state, so we receive a "known bad" packet.
735 */
736#define E_SUM_LINK_PKTERRS \
737 (ERR_MASK(SendDroppedDataPktErr) | ERR_MASK(SendDroppedSmpPktErr) | \
738 ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \
739 ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \
740 ERR_MASK(RcvUnexpectedCharErr))
741
742static void autoneg_7220_work(struct work_struct *);
743static u32 __iomem *qib_7220_getsendbuf(struct qib_pportdata *, u64, u32 *);
744
745/*
746 * Called when we might have an error that is specific to a particular
747 * PIO buffer, and may need to cancel that buffer, so it can be re-used.
748 * because we don't need to force the update of pioavail.
749 */
750static void qib_disarm_7220_senderrbufs(struct qib_pportdata *ppd)
751{
752 unsigned long sbuf[3];
753 struct qib_devdata *dd = ppd->dd;
754
755 /*
756 * It's possible that sendbuffererror could have bits set; might
757 * have already done this as a result of hardware error handling.
758 */
759 /* read these before writing errorclear */
760 sbuf[0] = qib_read_kreg64(dd, kr_sendbuffererror);
761 sbuf[1] = qib_read_kreg64(dd, kr_sendbuffererror + 1);
762 sbuf[2] = qib_read_kreg64(dd, kr_sendbuffererror + 2);
763
764 if (sbuf[0] || sbuf[1] || sbuf[2])
765 qib_disarm_piobufs_set(dd, sbuf,
766 dd->piobcnt2k + dd->piobcnt4k);
767}
768
769static void qib_7220_txe_recover(struct qib_devdata *dd)
770{
771 qib_devinfo(dd->pcidev, "Recovering from TXE PIO parity error\n");
772 qib_disarm_7220_senderrbufs(dd->pport);
773}
774
775/*
776 * This is called with interrupts disabled and sdma_lock held.
777 */
778static void qib_7220_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op)
779{
780 struct qib_devdata *dd = ppd->dd;
781 u64 set_sendctrl = 0;
782 u64 clr_sendctrl = 0;
783
784 if (op & QIB_SDMA_SENDCTRL_OP_ENABLE)
785 set_sendctrl |= SYM_MASK(SendCtrl, SDmaEnable);
786 else
787 clr_sendctrl |= SYM_MASK(SendCtrl, SDmaEnable);
788
789 if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE)
790 set_sendctrl |= SYM_MASK(SendCtrl, SDmaIntEnable);
791 else
792 clr_sendctrl |= SYM_MASK(SendCtrl, SDmaIntEnable);
793
794 if (op & QIB_SDMA_SENDCTRL_OP_HALT)
795 set_sendctrl |= SYM_MASK(SendCtrl, SDmaHalt);
796 else
797 clr_sendctrl |= SYM_MASK(SendCtrl, SDmaHalt);
798
799 spin_lock(&dd->sendctrl_lock);
800
801 dd->sendctrl |= set_sendctrl;
802 dd->sendctrl &= ~clr_sendctrl;
803
804 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
805 qib_write_kreg(dd, kr_scratch, 0);
806
807 spin_unlock(&dd->sendctrl_lock);
808}
809
810static void qib_decode_7220_sdma_errs(struct qib_pportdata *ppd,
811 u64 err, char *buf, size_t blen)
812{
813 static const struct {
814 u64 err;
815 const char *msg;
816 } errs[] = {
817 { ERR_MASK(SDmaGenMismatchErr),
818 "SDmaGenMismatch" },
819 { ERR_MASK(SDmaOutOfBoundErr),
820 "SDmaOutOfBound" },
821 { ERR_MASK(SDmaTailOutOfBoundErr),
822 "SDmaTailOutOfBound" },
823 { ERR_MASK(SDmaBaseErr),
824 "SDmaBase" },
825 { ERR_MASK(SDma1stDescErr),
826 "SDma1stDesc" },
827 { ERR_MASK(SDmaRpyTagErr),
828 "SDmaRpyTag" },
829 { ERR_MASK(SDmaDwEnErr),
830 "SDmaDwEn" },
831 { ERR_MASK(SDmaMissingDwErr),
832 "SDmaMissingDw" },
833 { ERR_MASK(SDmaUnexpDataErr),
834 "SDmaUnexpData" },
835 { ERR_MASK(SDmaDescAddrMisalignErr),
836 "SDmaDescAddrMisalign" },
837 { ERR_MASK(SendBufMisuseErr),
838 "SendBufMisuse" },
839 { ERR_MASK(SDmaDisabledErr),
840 "SDmaDisabled" },
841 };
842 int i;
843 size_t bidx = 0;
844
845 for (i = 0; i < ARRAY_SIZE(errs); i++) {
846 if (err & errs[i].err)
847 bidx += scnprintf(buf + bidx, blen - bidx,
848 "%s ", errs[i].msg);
849 }
850}
851
852/*
853 * This is called as part of link down clean up so disarm and flush
854 * all send buffers so that SMP packets can be sent.
855 */
856static void qib_7220_sdma_hw_clean_up(struct qib_pportdata *ppd)
857{
858 /* This will trigger the Abort interrupt */
859 sendctrl_7220_mod(ppd, QIB_SENDCTRL_DISARM_ALL | QIB_SENDCTRL_FLUSH |
860 QIB_SENDCTRL_AVAIL_BLIP);
861 ppd->dd->upd_pio_shadow = 1; /* update our idea of what's busy */
862}
863
864static void qib_sdma_7220_setlengen(struct qib_pportdata *ppd)
865{
866 /*
867 * Set SendDmaLenGen and clear and set
868 * the MSB of the generation count to enable generation checking
869 * and load the internal generation counter.
870 */
871 qib_write_kreg(ppd->dd, kr_senddmalengen, ppd->sdma_descq_cnt);
872 qib_write_kreg(ppd->dd, kr_senddmalengen,
873 ppd->sdma_descq_cnt |
874 (1ULL << QIB_7220_SendDmaLenGen_Generation_MSB));
875}
876
877static void qib_7220_sdma_hw_start_up(struct qib_pportdata *ppd)
878{
879 qib_sdma_7220_setlengen(ppd);
880 qib_sdma_update_7220_tail(ppd, 0); /* Set SendDmaTail */
881 ppd->sdma_head_dma[0] = 0;
882}
883
884#define DISABLES_SDMA ( \
885 ERR_MASK(SDmaDisabledErr) | \
886 ERR_MASK(SDmaBaseErr) | \
887 ERR_MASK(SDmaTailOutOfBoundErr) | \
888 ERR_MASK(SDmaOutOfBoundErr) | \
889 ERR_MASK(SDma1stDescErr) | \
890 ERR_MASK(SDmaRpyTagErr) | \
891 ERR_MASK(SDmaGenMismatchErr) | \
892 ERR_MASK(SDmaDescAddrMisalignErr) | \
893 ERR_MASK(SDmaMissingDwErr) | \
894 ERR_MASK(SDmaDwEnErr))
895
896static void sdma_7220_errors(struct qib_pportdata *ppd, u64 errs)
897{
898 unsigned long flags;
899 struct qib_devdata *dd = ppd->dd;
900 char *msg;
901
902 errs &= QLOGIC_IB_E_SDMAERRS;
903
904 msg = dd->cspec->sdmamsgbuf;
Mike Marciniszyn041af0b2015-01-16 10:50:32 -0500905 qib_decode_7220_sdma_errs(ppd, errs, msg,
906 sizeof(dd->cspec->sdmamsgbuf));
Ralph Campbellf9315512010-05-23 21:44:54 -0700907 spin_lock_irqsave(&ppd->sdma_lock, flags);
908
909 if (errs & ERR_MASK(SendBufMisuseErr)) {
910 unsigned long sbuf[3];
911
912 sbuf[0] = qib_read_kreg64(dd, kr_sendbuffererror);
913 sbuf[1] = qib_read_kreg64(dd, kr_sendbuffererror + 1);
914 sbuf[2] = qib_read_kreg64(dd, kr_sendbuffererror + 2);
915
916 qib_dev_err(ppd->dd,
917 "IB%u:%u SendBufMisuse: %04lx %016lx %016lx\n",
918 ppd->dd->unit, ppd->port, sbuf[2], sbuf[1],
919 sbuf[0]);
920 }
921
922 if (errs & ERR_MASK(SDmaUnexpDataErr))
923 qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", ppd->dd->unit,
924 ppd->port);
925
926 switch (ppd->sdma_state.current_state) {
927 case qib_sdma_state_s00_hw_down:
928 /* not expecting any interrupts */
929 break;
930
931 case qib_sdma_state_s10_hw_start_up_wait:
932 /* handled in intr path */
933 break;
934
935 case qib_sdma_state_s20_idle:
936 /* not expecting any interrupts */
937 break;
938
939 case qib_sdma_state_s30_sw_clean_up_wait:
940 /* not expecting any interrupts */
941 break;
942
943 case qib_sdma_state_s40_hw_clean_up_wait:
944 if (errs & ERR_MASK(SDmaDisabledErr))
945 __qib_sdma_process_event(ppd,
946 qib_sdma_event_e50_hw_cleaned);
947 break;
948
949 case qib_sdma_state_s50_hw_halt_wait:
950 /* handled in intr path */
951 break;
952
953 case qib_sdma_state_s99_running:
954 if (errs & DISABLES_SDMA)
955 __qib_sdma_process_event(ppd,
956 qib_sdma_event_e7220_err_halted);
957 break;
958 }
959
960 spin_unlock_irqrestore(&ppd->sdma_lock, flags);
961}
962
963/*
964 * Decode the error status into strings, deciding whether to always
965 * print * it or not depending on "normal packet errors" vs everything
966 * else. Return 1 if "real" errors, otherwise 0 if only packet
967 * errors, so caller can decide what to print with the string.
968 */
969static int qib_decode_7220_err(struct qib_devdata *dd, char *buf, size_t blen,
970 u64 err)
971{
972 int iserr = 1;
973
974 *buf = '\0';
975 if (err & QLOGIC_IB_E_PKTERRS) {
976 if (!(err & ~QLOGIC_IB_E_PKTERRS))
977 iserr = 0;
978 if ((err & ERR_MASK(RcvICRCErr)) &&
979 !(err & (ERR_MASK(RcvVCRCErr) | ERR_MASK(RcvEBPErr))))
980 strlcat(buf, "CRC ", blen);
981 if (!iserr)
982 goto done;
983 }
984 if (err & ERR_MASK(RcvHdrLenErr))
985 strlcat(buf, "rhdrlen ", blen);
986 if (err & ERR_MASK(RcvBadTidErr))
987 strlcat(buf, "rbadtid ", blen);
988 if (err & ERR_MASK(RcvBadVersionErr))
989 strlcat(buf, "rbadversion ", blen);
990 if (err & ERR_MASK(RcvHdrErr))
991 strlcat(buf, "rhdr ", blen);
992 if (err & ERR_MASK(SendSpecialTriggerErr))
993 strlcat(buf, "sendspecialtrigger ", blen);
994 if (err & ERR_MASK(RcvLongPktLenErr))
995 strlcat(buf, "rlongpktlen ", blen);
996 if (err & ERR_MASK(RcvMaxPktLenErr))
997 strlcat(buf, "rmaxpktlen ", blen);
998 if (err & ERR_MASK(RcvMinPktLenErr))
999 strlcat(buf, "rminpktlen ", blen);
1000 if (err & ERR_MASK(SendMinPktLenErr))
1001 strlcat(buf, "sminpktlen ", blen);
1002 if (err & ERR_MASK(RcvFormatErr))
1003 strlcat(buf, "rformaterr ", blen);
1004 if (err & ERR_MASK(RcvUnsupportedVLErr))
1005 strlcat(buf, "runsupvl ", blen);
1006 if (err & ERR_MASK(RcvUnexpectedCharErr))
1007 strlcat(buf, "runexpchar ", blen);
1008 if (err & ERR_MASK(RcvIBFlowErr))
1009 strlcat(buf, "ribflow ", blen);
1010 if (err & ERR_MASK(SendUnderRunErr))
1011 strlcat(buf, "sunderrun ", blen);
1012 if (err & ERR_MASK(SendPioArmLaunchErr))
1013 strlcat(buf, "spioarmlaunch ", blen);
1014 if (err & ERR_MASK(SendUnexpectedPktNumErr))
1015 strlcat(buf, "sunexperrpktnum ", blen);
1016 if (err & ERR_MASK(SendDroppedSmpPktErr))
1017 strlcat(buf, "sdroppedsmppkt ", blen);
1018 if (err & ERR_MASK(SendMaxPktLenErr))
1019 strlcat(buf, "smaxpktlen ", blen);
1020 if (err & ERR_MASK(SendUnsupportedVLErr))
1021 strlcat(buf, "sunsupVL ", blen);
1022 if (err & ERR_MASK(InvalidAddrErr))
1023 strlcat(buf, "invalidaddr ", blen);
1024 if (err & ERR_MASK(RcvEgrFullErr))
1025 strlcat(buf, "rcvegrfull ", blen);
1026 if (err & ERR_MASK(RcvHdrFullErr))
1027 strlcat(buf, "rcvhdrfull ", blen);
1028 if (err & ERR_MASK(IBStatusChanged))
1029 strlcat(buf, "ibcstatuschg ", blen);
1030 if (err & ERR_MASK(RcvIBLostLinkErr))
1031 strlcat(buf, "riblostlink ", blen);
1032 if (err & ERR_MASK(HardwareErr))
1033 strlcat(buf, "hardware ", blen);
1034 if (err & ERR_MASK(ResetNegated))
1035 strlcat(buf, "reset ", blen);
1036 if (err & QLOGIC_IB_E_SDMAERRS)
1037 qib_decode_7220_sdma_errs(dd->pport, err, buf, blen);
1038 if (err & ERR_MASK(InvalidEEPCmd))
1039 strlcat(buf, "invalideepromcmd ", blen);
1040done:
1041 return iserr;
1042}
1043
1044static void reenable_7220_chase(unsigned long opaque)
1045{
1046 struct qib_pportdata *ppd = (struct qib_pportdata *)opaque;
Mike Marciniszynda12c1f2015-01-16 11:23:31 -05001047
Ralph Campbellf9315512010-05-23 21:44:54 -07001048 ppd->cpspec->chase_timer.expires = 0;
1049 qib_set_ib_7220_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN,
1050 QLOGIC_IB_IBCC_LINKINITCMD_POLL);
1051}
1052
1053static void handle_7220_chase(struct qib_pportdata *ppd, u64 ibcst)
1054{
1055 u8 ibclt;
Mike Marciniszyn8482d5d2011-11-09 13:36:08 -05001056 unsigned long tnow;
Ralph Campbellf9315512010-05-23 21:44:54 -07001057
1058 ibclt = (u8)SYM_FIELD(ibcst, IBCStatus, LinkTrainingState);
1059
1060 /*
1061 * Detect and handle the state chase issue, where we can
1062 * get stuck if we are unlucky on timing on both sides of
1063 * the link. If we are, we disable, set a timer, and
1064 * then re-enable.
1065 */
1066 switch (ibclt) {
1067 case IB_7220_LT_STATE_CFGRCVFCFG:
1068 case IB_7220_LT_STATE_CFGWAITRMT:
1069 case IB_7220_LT_STATE_TXREVLANES:
1070 case IB_7220_LT_STATE_CFGENH:
Mike Marciniszyn8482d5d2011-11-09 13:36:08 -05001071 tnow = jiffies;
Ralph Campbellf9315512010-05-23 21:44:54 -07001072 if (ppd->cpspec->chase_end &&
Mike Marciniszyn8482d5d2011-11-09 13:36:08 -05001073 time_after(tnow, ppd->cpspec->chase_end)) {
Ralph Campbellf9315512010-05-23 21:44:54 -07001074 ppd->cpspec->chase_end = 0;
1075 qib_set_ib_7220_lstate(ppd,
1076 QLOGIC_IB_IBCC_LINKCMD_DOWN,
1077 QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
1078 ppd->cpspec->chase_timer.expires = jiffies +
1079 QIB_CHASE_DIS_TIME;
1080 add_timer(&ppd->cpspec->chase_timer);
1081 } else if (!ppd->cpspec->chase_end)
1082 ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME;
1083 break;
1084
1085 default:
1086 ppd->cpspec->chase_end = 0;
1087 break;
1088 }
1089}
1090
1091static void handle_7220_errors(struct qib_devdata *dd, u64 errs)
1092{
1093 char *msg;
1094 u64 ignore_this_time = 0;
1095 u64 iserr = 0;
1096 int log_idx;
1097 struct qib_pportdata *ppd = dd->pport;
1098 u64 mask;
1099
1100 /* don't report errors that are masked */
1101 errs &= dd->cspec->errormask;
1102 msg = dd->cspec->emsgbuf;
1103
1104 /* do these first, they are most important */
1105 if (errs & ERR_MASK(HardwareErr))
Mike Marciniszyn041af0b2015-01-16 10:50:32 -05001106 qib_7220_handle_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf));
Ralph Campbellf9315512010-05-23 21:44:54 -07001107 else
1108 for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx)
1109 if (errs & dd->eep_st_masks[log_idx].errs_to_log)
1110 qib_inc_eeprom_err(dd, log_idx, 1);
1111
1112 if (errs & QLOGIC_IB_E_SDMAERRS)
1113 sdma_7220_errors(ppd, errs);
1114
1115 if (errs & ~IB_E_BITSEXTANT)
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00001116 qib_dev_err(dd,
1117 "error interrupt with unknown errors %llx set\n",
1118 (unsigned long long) (errs & ~IB_E_BITSEXTANT));
Ralph Campbellf9315512010-05-23 21:44:54 -07001119
1120 if (errs & E_SUM_ERRS) {
1121 qib_disarm_7220_senderrbufs(ppd);
1122 if ((errs & E_SUM_LINK_PKTERRS) &&
1123 !(ppd->lflags & QIBL_LINKACTIVE)) {
1124 /*
1125 * This can happen when trying to bring the link
1126 * up, but the IB link changes state at the "wrong"
1127 * time. The IB logic then complains that the packet
1128 * isn't valid. We don't want to confuse people, so
1129 * we just don't print them, except at debug
1130 */
1131 ignore_this_time = errs & E_SUM_LINK_PKTERRS;
1132 }
1133 } else if ((errs & E_SUM_LINK_PKTERRS) &&
1134 !(ppd->lflags & QIBL_LINKACTIVE)) {
1135 /*
1136 * This can happen when SMA is trying to bring the link
1137 * up, but the IB link changes state at the "wrong" time.
1138 * The IB logic then complains that the packet isn't
1139 * valid. We don't want to confuse people, so we just
1140 * don't print them, except at debug
1141 */
1142 ignore_this_time = errs & E_SUM_LINK_PKTERRS;
1143 }
1144
1145 qib_write_kreg(dd, kr_errclear, errs);
1146
1147 errs &= ~ignore_this_time;
1148 if (!errs)
1149 goto done;
1150
1151 /*
1152 * The ones we mask off are handled specially below
1153 * or above. Also mask SDMADISABLED by default as it
1154 * is too chatty.
1155 */
1156 mask = ERR_MASK(IBStatusChanged) |
1157 ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) |
1158 ERR_MASK(HardwareErr) | ERR_MASK(SDmaDisabledErr);
1159
Mike Marciniszyn041af0b2015-01-16 10:50:32 -05001160 qib_decode_7220_err(dd, msg, sizeof(dd->cspec->emsgbuf), errs & ~mask);
Ralph Campbellf9315512010-05-23 21:44:54 -07001161
1162 if (errs & E_SUM_PKTERRS)
1163 qib_stats.sps_rcverrs++;
1164 if (errs & E_SUM_ERRS)
1165 qib_stats.sps_txerrs++;
1166 iserr = errs & ~(E_SUM_PKTERRS | QLOGIC_IB_E_PKTERRS |
1167 ERR_MASK(SDmaDisabledErr));
1168
1169 if (errs & ERR_MASK(IBStatusChanged)) {
1170 u64 ibcs;
1171
1172 ibcs = qib_read_kreg64(dd, kr_ibcstatus);
1173 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
1174 handle_7220_chase(ppd, ibcs);
1175
1176 /* Update our picture of width and speed from chip */
1177 ppd->link_width_active =
1178 ((ibcs >> IBA7220_LINKWIDTH_SHIFT) & 1) ?
1179 IB_WIDTH_4X : IB_WIDTH_1X;
1180 ppd->link_speed_active =
1181 ((ibcs >> IBA7220_LINKSPEED_SHIFT) & 1) ?
1182 QIB_IB_DDR : QIB_IB_SDR;
1183
1184 /*
1185 * Since going into a recovery state causes the link state
1186 * to go down and since recovery is transitory, it is better
1187 * if we "miss" ever seeing the link training state go into
1188 * recovery (i.e., ignore this transition for link state
1189 * special handling purposes) without updating lastibcstat.
1190 */
1191 if (qib_7220_phys_portstate(ibcs) !=
1192 IB_PHYSPORTSTATE_LINK_ERR_RECOVER)
1193 qib_handle_e_ibstatuschanged(ppd, ibcs);
1194 }
1195
1196 if (errs & ERR_MASK(ResetNegated)) {
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00001197 qib_dev_err(dd,
1198 "Got reset, requires re-init (unload and reload driver)\n");
Ralph Campbellf9315512010-05-23 21:44:54 -07001199 dd->flags &= ~QIB_INITTED; /* needs re-init */
1200 /* mark as having had error */
1201 *dd->devstatusp |= QIB_STATUS_HWERROR;
1202 *dd->pport->statusp &= ~QIB_STATUS_IB_CONF;
1203 }
1204
1205 if (*msg && iserr)
1206 qib_dev_porterr(dd, ppd->port, "%s error\n", msg);
1207
1208 if (ppd->state_wanted & ppd->lflags)
1209 wake_up_interruptible(&ppd->state_wait);
1210
1211 /*
1212 * If there were hdrq or egrfull errors, wake up any processes
1213 * waiting in poll. We used to try to check which contexts had
1214 * the overflow, but given the cost of that and the chip reads
1215 * to support it, it's better to just wake everybody up if we
1216 * get an overflow; waiters can poll again if it's not them.
1217 */
1218 if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) {
1219 qib_handle_urcv(dd, ~0U);
1220 if (errs & ERR_MASK(RcvEgrFullErr))
1221 qib_stats.sps_buffull++;
1222 else
1223 qib_stats.sps_hdrfull++;
1224 }
1225done:
1226 return;
1227}
1228
1229/* enable/disable chip from delivering interrupts */
1230static void qib_7220_set_intr_state(struct qib_devdata *dd, u32 enable)
1231{
1232 if (enable) {
1233 if (dd->flags & QIB_BADINTR)
1234 return;
1235 qib_write_kreg(dd, kr_intmask, ~0ULL);
1236 /* force re-interrupt of any pending interrupts. */
1237 qib_write_kreg(dd, kr_intclear, 0ULL);
1238 } else
1239 qib_write_kreg(dd, kr_intmask, 0ULL);
1240}
1241
1242/*
1243 * Try to cleanup as much as possible for anything that might have gone
1244 * wrong while in freeze mode, such as pio buffers being written by user
1245 * processes (causing armlaunch), send errors due to going into freeze mode,
1246 * etc., and try to avoid causing extra interrupts while doing so.
1247 * Forcibly update the in-memory pioavail register copies after cleanup
1248 * because the chip won't do it while in freeze mode (the register values
1249 * themselves are kept correct).
1250 * Make sure that we don't lose any important interrupts by using the chip
1251 * feature that says that writing 0 to a bit in *clear that is set in
1252 * *status will cause an interrupt to be generated again (if allowed by
1253 * the *mask value).
1254 * This is in chip-specific code because of all of the register accesses,
1255 * even though the details are similar on most chips.
1256 */
1257static void qib_7220_clear_freeze(struct qib_devdata *dd)
1258{
1259 /* disable error interrupts, to avoid confusion */
1260 qib_write_kreg(dd, kr_errmask, 0ULL);
1261
1262 /* also disable interrupts; errormask is sometimes overwriten */
1263 qib_7220_set_intr_state(dd, 0);
1264
1265 qib_cancel_sends(dd->pport);
1266
1267 /* clear the freeze, and be sure chip saw it */
1268 qib_write_kreg(dd, kr_control, dd->control);
1269 qib_read_kreg32(dd, kr_scratch);
1270
1271 /* force in-memory update now we are out of freeze */
1272 qib_force_pio_avail_update(dd);
1273
1274 /*
1275 * force new interrupt if any hwerr, error or interrupt bits are
1276 * still set, and clear "safe" send packet errors related to freeze
1277 * and cancelling sends. Re-enable error interrupts before possible
1278 * force of re-interrupt on pending interrupts.
1279 */
1280 qib_write_kreg(dd, kr_hwerrclear, 0ULL);
1281 qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE);
1282 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
1283 qib_7220_set_intr_state(dd, 1);
1284}
1285
1286/**
1287 * qib_7220_handle_hwerrors - display hardware errors.
1288 * @dd: the qlogic_ib device
1289 * @msg: the output buffer
1290 * @msgl: the size of the output buffer
1291 *
1292 * Use same msg buffer as regular errors to avoid excessive stack
1293 * use. Most hardware errors are catastrophic, but for right now,
1294 * we'll print them and continue. We reuse the same message buffer as
1295 * handle_7220_errors() to avoid excessive stack usage.
1296 */
1297static void qib_7220_handle_hwerrors(struct qib_devdata *dd, char *msg,
1298 size_t msgl)
1299{
1300 u64 hwerrs;
1301 u32 bits, ctrl;
1302 int isfatal = 0;
1303 char *bitsmsg;
1304 int log_idx;
1305
1306 hwerrs = qib_read_kreg64(dd, kr_hwerrstatus);
1307 if (!hwerrs)
1308 goto bail;
1309 if (hwerrs == ~0ULL) {
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00001310 qib_dev_err(dd,
1311 "Read of hardware error status failed (all bits set); ignoring\n");
Ralph Campbellf9315512010-05-23 21:44:54 -07001312 goto bail;
1313 }
1314 qib_stats.sps_hwerrs++;
1315
1316 /*
1317 * Always clear the error status register, except MEMBISTFAIL,
1318 * regardless of whether we continue or stop using the chip.
1319 * We want that set so we know it failed, even across driver reload.
1320 * We'll still ignore it in the hwerrmask. We do this partly for
1321 * diagnostics, but also for support.
1322 */
1323 qib_write_kreg(dd, kr_hwerrclear,
1324 hwerrs & ~HWE_MASK(PowerOnBISTFailed));
1325
1326 hwerrs &= dd->cspec->hwerrmask;
1327
1328 /* We log some errors to EEPROM, check if we have any of those. */
1329 for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx)
1330 if (hwerrs & dd->eep_st_masks[log_idx].hwerrs_to_log)
1331 qib_inc_eeprom_err(dd, log_idx, 1);
1332 if (hwerrs & ~(TXEMEMPARITYERR_PIOBUF | TXEMEMPARITYERR_PIOPBC |
1333 RXE_PARITY))
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00001334 qib_devinfo(dd->pcidev,
1335 "Hardware error: hwerr=0x%llx (cleared)\n",
1336 (unsigned long long) hwerrs);
Ralph Campbellf9315512010-05-23 21:44:54 -07001337
1338 if (hwerrs & ~IB_HWE_BITSEXTANT)
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00001339 qib_dev_err(dd,
1340 "hwerror interrupt with unknown errors %llx set\n",
1341 (unsigned long long) (hwerrs & ~IB_HWE_BITSEXTANT));
Ralph Campbellf9315512010-05-23 21:44:54 -07001342
1343 if (hwerrs & QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR)
1344 qib_sd7220_clr_ibpar(dd);
1345
1346 ctrl = qib_read_kreg32(dd, kr_control);
1347 if ((ctrl & QLOGIC_IB_C_FREEZEMODE) && !dd->diag_client) {
1348 /*
1349 * Parity errors in send memory are recoverable by h/w
1350 * just do housekeeping, exit freeze mode and continue.
1351 */
1352 if (hwerrs & (TXEMEMPARITYERR_PIOBUF |
1353 TXEMEMPARITYERR_PIOPBC)) {
1354 qib_7220_txe_recover(dd);
1355 hwerrs &= ~(TXEMEMPARITYERR_PIOBUF |
1356 TXEMEMPARITYERR_PIOPBC);
1357 }
1358 if (hwerrs)
1359 isfatal = 1;
1360 else
1361 qib_7220_clear_freeze(dd);
1362 }
1363
1364 *msg = '\0';
1365
1366 if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
1367 isfatal = 1;
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00001368 strlcat(msg,
1369 "[Memory BIST test failed, InfiniPath hardware unusable]",
1370 msgl);
Ralph Campbellf9315512010-05-23 21:44:54 -07001371 /* ignore from now on, so disable until driver reloaded */
1372 dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
1373 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
1374 }
1375
1376 qib_format_hwerrors(hwerrs, qib_7220_hwerror_msgs,
1377 ARRAY_SIZE(qib_7220_hwerror_msgs), msg, msgl);
1378
1379 bitsmsg = dd->cspec->bitsmsgbuf;
1380 if (hwerrs & (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK <<
1381 QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT)) {
1382 bits = (u32) ((hwerrs >>
1383 QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) &
1384 QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK);
Mike Marciniszyn041af0b2015-01-16 10:50:32 -05001385 snprintf(bitsmsg, sizeof(dd->cspec->bitsmsgbuf),
Ralph Campbellf9315512010-05-23 21:44:54 -07001386 "[PCIe Mem Parity Errs %x] ", bits);
1387 strlcat(msg, bitsmsg, msgl);
1388 }
1389
1390#define _QIB_PLL_FAIL (QLOGIC_IB_HWE_COREPLL_FBSLIP | \
1391 QLOGIC_IB_HWE_COREPLL_RFSLIP)
1392
1393 if (hwerrs & _QIB_PLL_FAIL) {
1394 isfatal = 1;
Mike Marciniszyn041af0b2015-01-16 10:50:32 -05001395 snprintf(bitsmsg, sizeof(dd->cspec->bitsmsgbuf),
Ralph Campbellf9315512010-05-23 21:44:54 -07001396 "[PLL failed (%llx), InfiniPath hardware unusable]",
1397 (unsigned long long) hwerrs & _QIB_PLL_FAIL);
1398 strlcat(msg, bitsmsg, msgl);
1399 /* ignore from now on, so disable until driver reloaded */
1400 dd->cspec->hwerrmask &= ~(hwerrs & _QIB_PLL_FAIL);
1401 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
1402 }
1403
1404 if (hwerrs & QLOGIC_IB_HWE_SERDESPLLFAILED) {
1405 /*
1406 * If it occurs, it is left masked since the eternal
1407 * interface is unused.
1408 */
1409 dd->cspec->hwerrmask &= ~QLOGIC_IB_HWE_SERDESPLLFAILED;
1410 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
1411 }
1412
1413 qib_dev_err(dd, "%s hardware error\n", msg);
1414
1415 if (isfatal && !dd->diag_client) {
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00001416 qib_dev_err(dd,
1417 "Fatal Hardware Error, no longer usable, SN %.16s\n",
1418 dd->serial);
Ralph Campbellf9315512010-05-23 21:44:54 -07001419 /*
1420 * For /sys status file and user programs to print; if no
1421 * trailing brace is copied, we'll know it was truncated.
1422 */
1423 if (dd->freezemsg)
1424 snprintf(dd->freezemsg, dd->freezelen,
1425 "{%s}", msg);
1426 qib_disable_after_error(dd);
1427 }
1428bail:;
1429}
1430
1431/**
1432 * qib_7220_init_hwerrors - enable hardware errors
1433 * @dd: the qlogic_ib device
1434 *
1435 * now that we have finished initializing everything that might reasonably
1436 * cause a hardware error, and cleared those errors bits as they occur,
1437 * we can enable hardware errors in the mask (potentially enabling
1438 * freeze mode), and enable hardware errors as errors (along with
1439 * everything else) in errormask
1440 */
1441static void qib_7220_init_hwerrors(struct qib_devdata *dd)
1442{
1443 u64 val;
1444 u64 extsval;
1445
1446 extsval = qib_read_kreg64(dd, kr_extstatus);
1447
1448 if (!(extsval & (QLOGIC_IB_EXTS_MEMBIST_ENDTEST |
1449 QLOGIC_IB_EXTS_MEMBIST_DISABLED)))
1450 qib_dev_err(dd, "MemBIST did not complete!\n");
1451 if (extsval & QLOGIC_IB_EXTS_MEMBIST_DISABLED)
1452 qib_devinfo(dd->pcidev, "MemBIST is disabled.\n");
1453
1454 val = ~0ULL; /* default to all hwerrors become interrupts, */
1455
1456 val &= ~QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR;
1457 dd->cspec->hwerrmask = val;
1458
1459 qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed));
1460 qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
1461
1462 /* clear all */
1463 qib_write_kreg(dd, kr_errclear, ~0ULL);
1464 /* enable errors that are masked, at least this first time. */
1465 qib_write_kreg(dd, kr_errmask, ~0ULL);
1466 dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask);
1467 /* clear any interrupts up to this point (ints still not enabled) */
1468 qib_write_kreg(dd, kr_intclear, ~0ULL);
1469}
1470
1471/*
1472 * Disable and enable the armlaunch error. Used for PIO bandwidth testing
1473 * on chips that are count-based, rather than trigger-based. There is no
1474 * reference counting, but that's also fine, given the intended use.
1475 * Only chip-specific because it's all register accesses
1476 */
1477static void qib_set_7220_armlaunch(struct qib_devdata *dd, u32 enable)
1478{
1479 if (enable) {
1480 qib_write_kreg(dd, kr_errclear, ERR_MASK(SendPioArmLaunchErr));
1481 dd->cspec->errormask |= ERR_MASK(SendPioArmLaunchErr);
1482 } else
1483 dd->cspec->errormask &= ~ERR_MASK(SendPioArmLaunchErr);
1484 qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
1485}
1486
1487/*
1488 * Formerly took parameter <which> in pre-shifted,
1489 * pre-merged form with LinkCmd and LinkInitCmd
1490 * together, and assuming the zero was NOP.
1491 */
1492static void qib_set_ib_7220_lstate(struct qib_pportdata *ppd, u16 linkcmd,
1493 u16 linitcmd)
1494{
1495 u64 mod_wd;
1496 struct qib_devdata *dd = ppd->dd;
1497 unsigned long flags;
1498
1499 if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) {
1500 /*
1501 * If we are told to disable, note that so link-recovery
1502 * code does not attempt to bring us back up.
1503 */
1504 spin_lock_irqsave(&ppd->lflags_lock, flags);
1505 ppd->lflags |= QIBL_IB_LINK_DISABLED;
1506 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
1507 } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) {
1508 /*
1509 * Any other linkinitcmd will lead to LINKDOWN and then
1510 * to INIT (if all is well), so clear flag to let
1511 * link-recovery code attempt to bring us back up.
1512 */
1513 spin_lock_irqsave(&ppd->lflags_lock, flags);
1514 ppd->lflags &= ~QIBL_IB_LINK_DISABLED;
1515 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
1516 }
1517
1518 mod_wd = (linkcmd << IBA7220_IBCC_LINKCMD_SHIFT) |
1519 (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
1520
1521 qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl | mod_wd);
1522 /* write to chip to prevent back-to-back writes of ibc reg */
1523 qib_write_kreg(dd, kr_scratch, 0);
1524}
1525
1526/*
1527 * All detailed interaction with the SerDes has been moved to qib_sd7220.c
1528 *
1529 * The portion of IBA7220-specific bringup_serdes() that actually deals with
1530 * registers and memory within the SerDes itself is qib_sd7220_init().
1531 */
1532
1533/**
1534 * qib_7220_bringup_serdes - bring up the serdes
1535 * @ppd: physical port on the qlogic_ib device
1536 */
1537static int qib_7220_bringup_serdes(struct qib_pportdata *ppd)
1538{
1539 struct qib_devdata *dd = ppd->dd;
1540 u64 val, prev_val, guid, ibc;
1541 int ret = 0;
1542
1543 /* Put IBC in reset, sends disabled */
1544 dd->control &= ~QLOGIC_IB_C_LINKENABLE;
1545 qib_write_kreg(dd, kr_control, 0ULL);
1546
1547 if (qib_compat_ddr_negotiate) {
1548 ppd->cpspec->ibdeltainprog = 1;
1549 ppd->cpspec->ibsymsnap = read_7220_creg32(dd, cr_ibsymbolerr);
1550 ppd->cpspec->iblnkerrsnap =
1551 read_7220_creg32(dd, cr_iblinkerrrecov);
1552 }
1553
1554 /* flowcontrolwatermark is in units of KBytes */
1555 ibc = 0x5ULL << SYM_LSB(IBCCtrl, FlowCtrlWaterMark);
1556 /*
1557 * How often flowctrl sent. More or less in usecs; balance against
1558 * watermark value, so that in theory senders always get a flow
1559 * control update in time to not let the IB link go idle.
1560 */
1561 ibc |= 0x3ULL << SYM_LSB(IBCCtrl, FlowCtrlPeriod);
1562 /* max error tolerance */
1563 ibc |= 0xfULL << SYM_LSB(IBCCtrl, PhyerrThreshold);
1564 /* use "real" buffer space for */
1565 ibc |= 4ULL << SYM_LSB(IBCCtrl, CreditScale);
1566 /* IB credit flow control. */
1567 ibc |= 0xfULL << SYM_LSB(IBCCtrl, OverrunThreshold);
1568 /*
1569 * set initial max size pkt IBC will send, including ICRC; it's the
1570 * PIO buffer size in dwords, less 1; also see qib_set_mtu()
1571 */
1572 ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << SYM_LSB(IBCCtrl, MaxPktLen);
1573 ppd->cpspec->ibcctrl = ibc; /* without linkcmd or linkinitcmd! */
1574
1575 /* initially come up waiting for TS1, without sending anything. */
1576 val = ppd->cpspec->ibcctrl | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
1577 QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
1578 qib_write_kreg(dd, kr_ibcctrl, val);
1579
1580 if (!ppd->cpspec->ibcddrctrl) {
1581 /* not on re-init after reset */
1582 ppd->cpspec->ibcddrctrl = qib_read_kreg64(dd, kr_ibcddrctrl);
1583
1584 if (ppd->link_speed_enabled == (QIB_IB_SDR | QIB_IB_DDR))
1585 ppd->cpspec->ibcddrctrl |=
1586 IBA7220_IBC_SPEED_AUTONEG_MASK |
1587 IBA7220_IBC_IBTA_1_2_MASK;
1588 else
1589 ppd->cpspec->ibcddrctrl |=
1590 ppd->link_speed_enabled == QIB_IB_DDR ?
1591 IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR;
1592 if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) ==
1593 (IB_WIDTH_1X | IB_WIDTH_4X))
1594 ppd->cpspec->ibcddrctrl |= IBA7220_IBC_WIDTH_AUTONEG;
1595 else
1596 ppd->cpspec->ibcddrctrl |=
1597 ppd->link_width_enabled == IB_WIDTH_4X ?
1598 IBA7220_IBC_WIDTH_4X_ONLY :
1599 IBA7220_IBC_WIDTH_1X_ONLY;
1600
1601 /* always enable these on driver reload, not sticky */
1602 ppd->cpspec->ibcddrctrl |=
1603 IBA7220_IBC_RXPOL_MASK << IBA7220_IBC_RXPOL_SHIFT;
1604 ppd->cpspec->ibcddrctrl |=
1605 IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT;
1606
1607 /* enable automatic lane reversal detection for receive */
1608 ppd->cpspec->ibcddrctrl |= IBA7220_IBC_LANE_REV_SUPPORTED;
1609 } else
1610 /* write to chip to prevent back-to-back writes of ibc reg */
1611 qib_write_kreg(dd, kr_scratch, 0);
1612
1613 qib_write_kreg(dd, kr_ibcddrctrl, ppd->cpspec->ibcddrctrl);
1614 qib_write_kreg(dd, kr_scratch, 0);
1615
1616 qib_write_kreg(dd, kr_ncmodectrl, 0Ull);
1617 qib_write_kreg(dd, kr_scratch, 0);
1618
1619 ret = qib_sd7220_init(dd);
1620
1621 val = qib_read_kreg64(dd, kr_xgxs_cfg);
1622 prev_val = val;
1623 val |= QLOGIC_IB_XGXS_FC_SAFE;
1624 if (val != prev_val) {
1625 qib_write_kreg(dd, kr_xgxs_cfg, val);
1626 qib_read_kreg32(dd, kr_scratch);
1627 }
1628 if (val & QLOGIC_IB_XGXS_RESET)
1629 val &= ~QLOGIC_IB_XGXS_RESET;
1630 if (val != prev_val)
1631 qib_write_kreg(dd, kr_xgxs_cfg, val);
1632
1633 /* first time through, set port guid */
1634 if (!ppd->guid)
1635 ppd->guid = dd->base_guid;
1636 guid = be64_to_cpu(ppd->guid);
1637
1638 qib_write_kreg(dd, kr_hrtbt_guid, guid);
1639 if (!ret) {
1640 dd->control |= QLOGIC_IB_C_LINKENABLE;
1641 qib_write_kreg(dd, kr_control, dd->control);
1642 } else
1643 /* write to chip to prevent back-to-back writes of ibc reg */
1644 qib_write_kreg(dd, kr_scratch, 0);
1645 return ret;
1646}
1647
1648/**
1649 * qib_7220_quiet_serdes - set serdes to txidle
1650 * @ppd: physical port of the qlogic_ib device
1651 * Called when driver is being unloaded
1652 */
1653static void qib_7220_quiet_serdes(struct qib_pportdata *ppd)
1654{
1655 u64 val;
1656 struct qib_devdata *dd = ppd->dd;
1657 unsigned long flags;
1658
1659 /* disable IBC */
1660 dd->control &= ~QLOGIC_IB_C_LINKENABLE;
1661 qib_write_kreg(dd, kr_control,
1662 dd->control | QLOGIC_IB_C_FREEZEMODE);
1663
1664 ppd->cpspec->chase_end = 0;
1665 if (ppd->cpspec->chase_timer.data) /* if initted */
1666 del_timer_sync(&ppd->cpspec->chase_timer);
1667
1668 if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta ||
1669 ppd->cpspec->ibdeltainprog) {
1670 u64 diagc;
1671
1672 /* enable counter writes */
1673 diagc = qib_read_kreg64(dd, kr_hwdiagctrl);
1674 qib_write_kreg(dd, kr_hwdiagctrl,
1675 diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable));
1676
1677 if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) {
1678 val = read_7220_creg32(dd, cr_ibsymbolerr);
1679 if (ppd->cpspec->ibdeltainprog)
1680 val -= val - ppd->cpspec->ibsymsnap;
1681 val -= ppd->cpspec->ibsymdelta;
1682 write_7220_creg(dd, cr_ibsymbolerr, val);
1683 }
1684 if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) {
1685 val = read_7220_creg32(dd, cr_iblinkerrrecov);
1686 if (ppd->cpspec->ibdeltainprog)
1687 val -= val - ppd->cpspec->iblnkerrsnap;
1688 val -= ppd->cpspec->iblnkerrdelta;
1689 write_7220_creg(dd, cr_iblinkerrrecov, val);
1690 }
1691
1692 /* and disable counter writes */
1693 qib_write_kreg(dd, kr_hwdiagctrl, diagc);
1694 }
1695 qib_set_ib_7220_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
1696
1697 spin_lock_irqsave(&ppd->lflags_lock, flags);
1698 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG;
1699 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
1700 wake_up(&ppd->cpspec->autoneg_wait);
Tejun Heof0626712010-10-19 15:24:36 +00001701 cancel_delayed_work_sync(&ppd->cpspec->autoneg_work);
Ralph Campbellf9315512010-05-23 21:44:54 -07001702
1703 shutdown_7220_relock_poll(ppd->dd);
1704 val = qib_read_kreg64(ppd->dd, kr_xgxs_cfg);
1705 val |= QLOGIC_IB_XGXS_RESET;
1706 qib_write_kreg(ppd->dd, kr_xgxs_cfg, val);
1707}
1708
1709/**
1710 * qib_setup_7220_setextled - set the state of the two external LEDs
1711 * @dd: the qlogic_ib device
1712 * @on: whether the link is up or not
1713 *
1714 * The exact combo of LEDs if on is true is determined by looking
1715 * at the ibcstatus.
1716 *
1717 * These LEDs indicate the physical and logical state of IB link.
1718 * For this chip (at least with recommended board pinouts), LED1
1719 * is Yellow (logical state) and LED2 is Green (physical state),
1720 *
1721 * Note: We try to match the Mellanox HCA LED behavior as best
1722 * we can. Green indicates physical link state is OK (something is
1723 * plugged in, and we can train).
1724 * Amber indicates the link is logically up (ACTIVE).
1725 * Mellanox further blinks the amber LED to indicate data packet
1726 * activity, but we have no hardware support for that, so it would
1727 * require waking up every 10-20 msecs and checking the counters
1728 * on the chip, and then turning the LED off if appropriate. That's
1729 * visible overhead, so not something we will do.
1730 *
1731 */
1732static void qib_setup_7220_setextled(struct qib_pportdata *ppd, u32 on)
1733{
1734 struct qib_devdata *dd = ppd->dd;
1735 u64 extctl, ledblink = 0, val, lst, ltst;
1736 unsigned long flags;
1737
1738 /*
1739 * The diags use the LED to indicate diag info, so we leave
1740 * the external LED alone when the diags are running.
1741 */
1742 if (dd->diag_client)
1743 return;
1744
1745 if (ppd->led_override) {
1746 ltst = (ppd->led_override & QIB_LED_PHYS) ?
1747 IB_PHYSPORTSTATE_LINKUP : IB_PHYSPORTSTATE_DISABLED,
1748 lst = (ppd->led_override & QIB_LED_LOG) ?
1749 IB_PORT_ACTIVE : IB_PORT_DOWN;
1750 } else if (on) {
1751 val = qib_read_kreg64(dd, kr_ibcstatus);
1752 ltst = qib_7220_phys_portstate(val);
1753 lst = qib_7220_iblink_state(val);
1754 } else {
1755 ltst = 0;
1756 lst = 0;
1757 }
1758
1759 spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
1760 extctl = dd->cspec->extctrl & ~(SYM_MASK(EXTCtrl, LEDPriPortGreenOn) |
1761 SYM_MASK(EXTCtrl, LEDPriPortYellowOn));
1762 if (ltst == IB_PHYSPORTSTATE_LINKUP) {
1763 extctl |= SYM_MASK(EXTCtrl, LEDPriPortGreenOn);
1764 /*
1765 * counts are in chip clock (4ns) periods.
1766 * This is 1/16 sec (66.6ms) on,
1767 * 3/16 sec (187.5 ms) off, with packets rcvd
1768 */
1769 ledblink = ((66600 * 1000UL / 4) << IBA7220_LEDBLINK_ON_SHIFT)
1770 | ((187500 * 1000UL / 4) << IBA7220_LEDBLINK_OFF_SHIFT);
1771 }
1772 if (lst == IB_PORT_ACTIVE)
1773 extctl |= SYM_MASK(EXTCtrl, LEDPriPortYellowOn);
1774 dd->cspec->extctrl = extctl;
1775 qib_write_kreg(dd, kr_extctrl, extctl);
1776 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
1777
1778 if (ledblink) /* blink the LED on packet receive */
1779 qib_write_kreg(dd, kr_rcvpktledcnt, ledblink);
1780}
1781
1782static void qib_7220_free_irq(struct qib_devdata *dd)
1783{
1784 if (dd->cspec->irq) {
1785 free_irq(dd->cspec->irq, dd);
1786 dd->cspec->irq = 0;
1787 }
1788 qib_nomsi(dd);
1789}
1790
1791/*
1792 * qib_setup_7220_cleanup - clean up any per-chip chip-specific stuff
1793 * @dd: the qlogic_ib device
1794 *
1795 * This is called during driver unload.
1796 *
1797 */
1798static void qib_setup_7220_cleanup(struct qib_devdata *dd)
1799{
1800 qib_7220_free_irq(dd);
1801 kfree(dd->cspec->cntrs);
1802 kfree(dd->cspec->portcntrs);
1803}
1804
1805/*
1806 * This is only called for SDmaInt.
1807 * SDmaDisabled is handled on the error path.
1808 */
1809static void sdma_7220_intr(struct qib_pportdata *ppd, u64 istat)
1810{
1811 unsigned long flags;
1812
1813 spin_lock_irqsave(&ppd->sdma_lock, flags);
1814
1815 switch (ppd->sdma_state.current_state) {
1816 case qib_sdma_state_s00_hw_down:
1817 break;
1818
1819 case qib_sdma_state_s10_hw_start_up_wait:
1820 __qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started);
1821 break;
1822
1823 case qib_sdma_state_s20_idle:
1824 break;
1825
1826 case qib_sdma_state_s30_sw_clean_up_wait:
1827 break;
1828
1829 case qib_sdma_state_s40_hw_clean_up_wait:
1830 break;
1831
1832 case qib_sdma_state_s50_hw_halt_wait:
1833 __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted);
1834 break;
1835
1836 case qib_sdma_state_s99_running:
1837 /* too chatty to print here */
1838 __qib_sdma_intr(ppd);
1839 break;
1840 }
1841 spin_unlock_irqrestore(&ppd->sdma_lock, flags);
1842}
1843
1844static void qib_wantpiobuf_7220_intr(struct qib_devdata *dd, u32 needint)
1845{
1846 unsigned long flags;
1847
1848 spin_lock_irqsave(&dd->sendctrl_lock, flags);
1849 if (needint) {
1850 if (!(dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd)))
1851 goto done;
1852 /*
1853 * blip the availupd off, next write will be on, so
1854 * we ensure an avail update, regardless of threshold or
1855 * buffers becoming free, whenever we want an interrupt
1856 */
1857 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl &
1858 ~SYM_MASK(SendCtrl, SendBufAvailUpd));
1859 qib_write_kreg(dd, kr_scratch, 0ULL);
1860 dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail);
1861 } else
1862 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail);
1863 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
1864 qib_write_kreg(dd, kr_scratch, 0ULL);
1865done:
1866 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
1867}
1868
1869/*
1870 * Handle errors and unusual events first, separate function
1871 * to improve cache hits for fast path interrupt handling.
1872 */
1873static noinline void unlikely_7220_intr(struct qib_devdata *dd, u64 istat)
1874{
1875 if (unlikely(istat & ~QLOGIC_IB_I_BITSEXTANT))
1876 qib_dev_err(dd,
1877 "interrupt with unknown interrupts %Lx set\n",
1878 istat & ~QLOGIC_IB_I_BITSEXTANT);
1879
1880 if (istat & QLOGIC_IB_I_GPIO) {
1881 u32 gpiostatus;
1882
1883 /*
1884 * Boards for this chip currently don't use GPIO interrupts,
1885 * so clear by writing GPIOstatus to GPIOclear, and complain
1886 * to alert developer. To avoid endless repeats, clear
1887 * the bits in the mask, since there is some kind of
1888 * programming error or chip problem.
1889 */
1890 gpiostatus = qib_read_kreg32(dd, kr_gpio_status);
1891 /*
1892 * In theory, writing GPIOstatus to GPIOclear could
1893 * have a bad side-effect on some diagnostic that wanted
1894 * to poll for a status-change, but the various shadows
1895 * make that problematic at best. Diags will just suppress
1896 * all GPIO interrupts during such tests.
1897 */
1898 qib_write_kreg(dd, kr_gpio_clear, gpiostatus);
1899
1900 if (gpiostatus) {
1901 const u32 mask = qib_read_kreg32(dd, kr_gpio_mask);
1902 u32 gpio_irq = mask & gpiostatus;
1903
1904 /*
1905 * A bit set in status and (chip) Mask register
1906 * would cause an interrupt. Since we are not
1907 * expecting any, report it. Also check that the
1908 * chip reflects our shadow, report issues,
1909 * and refresh from the shadow.
1910 */
1911 /*
1912 * Clear any troublemakers, and update chip
1913 * from shadow
1914 */
1915 dd->cspec->gpio_mask &= ~gpio_irq;
1916 qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
1917 }
1918 }
1919
1920 if (istat & QLOGIC_IB_I_ERROR) {
1921 u64 estat;
1922
1923 qib_stats.sps_errints++;
1924 estat = qib_read_kreg64(dd, kr_errstatus);
1925 if (!estat)
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00001926 qib_devinfo(dd->pcidev,
1927 "error interrupt (%Lx), but no error bits set!\n",
1928 istat);
Ralph Campbellf9315512010-05-23 21:44:54 -07001929 else
1930 handle_7220_errors(dd, estat);
1931 }
1932}
1933
1934static irqreturn_t qib_7220intr(int irq, void *data)
1935{
1936 struct qib_devdata *dd = data;
1937 irqreturn_t ret;
1938 u64 istat;
1939 u64 ctxtrbits;
1940 u64 rmask;
1941 unsigned i;
1942
1943 if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) {
1944 /*
1945 * This return value is not great, but we do not want the
1946 * interrupt core code to remove our interrupt handler
1947 * because we don't appear to be handling an interrupt
1948 * during a chip reset.
1949 */
1950 ret = IRQ_HANDLED;
1951 goto bail;
1952 }
1953
1954 istat = qib_read_kreg64(dd, kr_intstatus);
1955
1956 if (unlikely(!istat)) {
1957 ret = IRQ_NONE; /* not our interrupt, or already handled */
1958 goto bail;
1959 }
1960 if (unlikely(istat == -1)) {
1961 qib_bad_intrstatus(dd);
1962 /* don't know if it was our interrupt or not */
1963 ret = IRQ_NONE;
1964 goto bail;
1965 }
1966
Mike Marciniszyn1ed88dd2014-03-07 08:40:49 -05001967 this_cpu_inc(*dd->int_counter);
Ralph Campbellf9315512010-05-23 21:44:54 -07001968 if (unlikely(istat & (~QLOGIC_IB_I_BITSEXTANT |
1969 QLOGIC_IB_I_GPIO | QLOGIC_IB_I_ERROR)))
1970 unlikely_7220_intr(dd, istat);
1971
1972 /*
1973 * Clear the interrupt bits we found set, relatively early, so we
1974 * "know" know the chip will have seen this by the time we process
1975 * the queue, and will re-interrupt if necessary. The processor
1976 * itself won't take the interrupt again until we return.
1977 */
1978 qib_write_kreg(dd, kr_intclear, istat);
1979
1980 /*
1981 * Handle kernel receive queues before checking for pio buffers
1982 * available since receives can overflow; piobuf waiters can afford
1983 * a few extra cycles, since they were waiting anyway.
1984 */
1985 ctxtrbits = istat &
1986 ((QLOGIC_IB_I_RCVAVAIL_MASK << QLOGIC_IB_I_RCVAVAIL_SHIFT) |
1987 (QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT));
1988 if (ctxtrbits) {
1989 rmask = (1ULL << QLOGIC_IB_I_RCVAVAIL_SHIFT) |
1990 (1ULL << QLOGIC_IB_I_RCVURG_SHIFT);
1991 for (i = 0; i < dd->first_user_ctxt; i++) {
1992 if (ctxtrbits & rmask) {
1993 ctxtrbits &= ~rmask;
1994 qib_kreceive(dd->rcd[i], NULL, NULL);
1995 }
1996 rmask <<= 1;
1997 }
1998 if (ctxtrbits) {
1999 ctxtrbits =
2000 (ctxtrbits >> QLOGIC_IB_I_RCVAVAIL_SHIFT) |
2001 (ctxtrbits >> QLOGIC_IB_I_RCVURG_SHIFT);
2002 qib_handle_urcv(dd, ctxtrbits);
2003 }
2004 }
2005
2006 /* only call for SDmaInt */
2007 if (istat & QLOGIC_IB_I_SDMAINT)
2008 sdma_7220_intr(dd->pport, istat);
2009
2010 if ((istat & QLOGIC_IB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED))
2011 qib_ib_piobufavail(dd);
2012
2013 ret = IRQ_HANDLED;
2014bail:
2015 return ret;
2016}
2017
2018/*
2019 * Set up our chip-specific interrupt handler.
2020 * The interrupt type has already been setup, so
2021 * we just need to do the registration and error checking.
2022 * If we are using MSI interrupts, we may fall back to
2023 * INTx later, if the interrupt handler doesn't get called
2024 * within 1/2 second (see verify_interrupt()).
2025 */
2026static void qib_setup_7220_interrupt(struct qib_devdata *dd)
2027{
2028 if (!dd->cspec->irq)
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00002029 qib_dev_err(dd,
2030 "irq is 0, BIOS error? Interrupts won't work\n");
Ralph Campbellf9315512010-05-23 21:44:54 -07002031 else {
2032 int ret = request_irq(dd->cspec->irq, qib_7220intr,
2033 dd->msi_lo ? 0 : IRQF_SHARED,
2034 QIB_DRV_NAME, dd);
2035
2036 if (ret)
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00002037 qib_dev_err(dd,
2038 "Couldn't setup %s interrupt (irq=%d): %d\n",
2039 dd->msi_lo ? "MSI" : "INTx",
2040 dd->cspec->irq, ret);
Ralph Campbellf9315512010-05-23 21:44:54 -07002041 }
2042}
2043
2044/**
2045 * qib_7220_boardname - fill in the board name
2046 * @dd: the qlogic_ib device
2047 *
2048 * info is based on the board revision register
2049 */
2050static void qib_7220_boardname(struct qib_devdata *dd)
2051{
2052 char *n;
2053 u32 boardid, namelen;
2054
2055 boardid = SYM_FIELD(dd->revision, Revision,
2056 BoardID);
2057
2058 switch (boardid) {
2059 case 1:
2060 n = "InfiniPath_QLE7240";
2061 break;
2062 case 2:
2063 n = "InfiniPath_QLE7280";
2064 break;
2065 default:
2066 qib_dev_err(dd, "Unknown 7220 board with ID %u\n", boardid);
2067 n = "Unknown_InfiniPath_7220";
2068 break;
2069 }
2070
2071 namelen = strlen(n) + 1;
2072 dd->boardname = kmalloc(namelen, GFP_KERNEL);
2073 if (!dd->boardname)
2074 qib_dev_err(dd, "Failed allocation for board name: %s\n", n);
2075 else
2076 snprintf(dd->boardname, namelen, "%s", n);
2077
2078 if (dd->majrev != 5 || !dd->minrev || dd->minrev > 2)
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00002079 qib_dev_err(dd,
2080 "Unsupported InfiniPath hardware revision %u.%u!\n",
2081 dd->majrev, dd->minrev);
Ralph Campbellf9315512010-05-23 21:44:54 -07002082
2083 snprintf(dd->boardversion, sizeof(dd->boardversion),
2084 "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n",
2085 QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname,
2086 (unsigned)SYM_FIELD(dd->revision, Revision_R, Arch),
2087 dd->majrev, dd->minrev,
2088 (unsigned)SYM_FIELD(dd->revision, Revision_R, SW));
2089}
2090
2091/*
2092 * This routine sleeps, so it can only be called from user context, not
2093 * from interrupt context.
2094 */
2095static int qib_setup_7220_reset(struct qib_devdata *dd)
2096{
2097 u64 val;
2098 int i;
2099 int ret;
2100 u16 cmdval;
2101 u8 int_line, clinesz;
2102 unsigned long flags;
2103
2104 qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz);
2105
2106 /* Use dev_err so it shows up in logs, etc. */
2107 qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit);
2108
2109 /* no interrupts till re-initted */
2110 qib_7220_set_intr_state(dd, 0);
2111
2112 dd->pport->cpspec->ibdeltainprog = 0;
2113 dd->pport->cpspec->ibsymdelta = 0;
2114 dd->pport->cpspec->iblnkerrdelta = 0;
2115
2116 /*
2117 * Keep chip from being accessed until we are ready. Use
2118 * writeq() directly, to allow the write even though QIB_PRESENT
Lucas De Marchie9c54992011-04-26 23:28:26 -07002119 * isn't set.
Ralph Campbellf9315512010-05-23 21:44:54 -07002120 */
2121 dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
Mike Marciniszyn1ed88dd2014-03-07 08:40:49 -05002122 /* so we check interrupts work again */
2123 dd->z_int_counter = qib_int_counter(dd);
Ralph Campbellf9315512010-05-23 21:44:54 -07002124 val = dd->control | QLOGIC_IB_C_RESET;
2125 writeq(val, &dd->kregbase[kr_control]);
2126 mb(); /* prevent compiler reordering around actual reset */
2127
2128 for (i = 1; i <= 5; i++) {
2129 /*
2130 * Allow MBIST, etc. to complete; longer on each retry.
2131 * We sometimes get machine checks from bus timeout if no
2132 * response, so for now, make it *really* long.
2133 */
2134 msleep(1000 + (1 + i) * 2000);
2135
2136 qib_pcie_reenable(dd, cmdval, int_line, clinesz);
2137
2138 /*
2139 * Use readq directly, so we don't need to mark it as PRESENT
2140 * until we get a successful indication that all is well.
2141 */
2142 val = readq(&dd->kregbase[kr_revision]);
2143 if (val == dd->revision) {
2144 dd->flags |= QIB_PRESENT; /* it's back */
2145 ret = qib_reinit_intr(dd);
2146 goto bail;
2147 }
2148 }
2149 ret = 0; /* failed */
2150
2151bail:
2152 if (ret) {
2153 if (qib_pcie_params(dd, dd->lbus_width, NULL, NULL))
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00002154 qib_dev_err(dd,
2155 "Reset failed to setup PCIe or interrupts; continuing anyway\n");
Ralph Campbellf9315512010-05-23 21:44:54 -07002156
2157 /* hold IBC in reset, no sends, etc till later */
2158 qib_write_kreg(dd, kr_control, 0ULL);
2159
2160 /* clear the reset error, init error/hwerror mask */
2161 qib_7220_init_hwerrors(dd);
2162
2163 /* do setup similar to speed or link-width changes */
2164 if (dd->pport->cpspec->ibcddrctrl & IBA7220_IBC_IBTA_1_2_MASK)
2165 dd->cspec->presets_needed = 1;
2166 spin_lock_irqsave(&dd->pport->lflags_lock, flags);
2167 dd->pport->lflags |= QIBL_IB_FORCE_NOTIFY;
2168 dd->pport->lflags &= ~QIBL_IB_AUTONEG_FAILED;
2169 spin_unlock_irqrestore(&dd->pport->lflags_lock, flags);
2170 }
2171
2172 return ret;
2173}
2174
2175/**
2176 * qib_7220_put_tid - write a TID to the chip
2177 * @dd: the qlogic_ib device
2178 * @tidptr: pointer to the expected TID (in chip) to update
2179 * @tidtype: 0 for eager, 1 for expected
2180 * @pa: physical address of in memory buffer; tidinvalid if freeing
2181 */
2182static void qib_7220_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr,
2183 u32 type, unsigned long pa)
2184{
2185 if (pa != dd->tidinvalid) {
2186 u64 chippa = pa >> IBA7220_TID_PA_SHIFT;
2187
2188 /* paranoia checks */
2189 if (pa != (chippa << IBA7220_TID_PA_SHIFT)) {
2190 qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n",
2191 pa);
2192 return;
2193 }
2194 if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00002195 qib_dev_err(dd,
2196 "Physical page address 0x%lx larger than supported\n",
2197 pa);
Ralph Campbellf9315512010-05-23 21:44:54 -07002198 return;
2199 }
2200
2201 if (type == RCVHQ_RCV_TYPE_EAGER)
2202 chippa |= dd->tidtemplate;
2203 else /* for now, always full 4KB page */
2204 chippa |= IBA7220_TID_SZ_4K;
2205 pa = chippa;
2206 }
2207 writeq(pa, tidptr);
2208 mmiowb();
2209}
2210
2211/**
2212 * qib_7220_clear_tids - clear all TID entries for a ctxt, expected and eager
2213 * @dd: the qlogic_ib device
2214 * @ctxt: the ctxt
2215 *
2216 * clear all TID entries for a ctxt, expected and eager.
2217 * Used from qib_close(). On this chip, TIDs are only 32 bits,
2218 * not 64, but they are still on 64 bit boundaries, so tidbase
2219 * is declared as u64 * for the pointer math, even though we write 32 bits
2220 */
2221static void qib_7220_clear_tids(struct qib_devdata *dd,
2222 struct qib_ctxtdata *rcd)
2223{
2224 u64 __iomem *tidbase;
2225 unsigned long tidinv;
2226 u32 ctxt;
2227 int i;
2228
2229 if (!dd->kregbase || !rcd)
2230 return;
2231
2232 ctxt = rcd->ctxt;
2233
2234 tidinv = dd->tidinvalid;
2235 tidbase = (u64 __iomem *)
2236 ((char __iomem *)(dd->kregbase) +
2237 dd->rcvtidbase +
2238 ctxt * dd->rcvtidcnt * sizeof(*tidbase));
2239
2240 for (i = 0; i < dd->rcvtidcnt; i++)
2241 qib_7220_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
2242 tidinv);
2243
2244 tidbase = (u64 __iomem *)
2245 ((char __iomem *)(dd->kregbase) +
2246 dd->rcvegrbase +
2247 rcd->rcvegr_tid_base * sizeof(*tidbase));
2248
2249 for (i = 0; i < rcd->rcvegrcnt; i++)
2250 qib_7220_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
2251 tidinv);
2252}
2253
2254/**
2255 * qib_7220_tidtemplate - setup constants for TID updates
2256 * @dd: the qlogic_ib device
2257 *
2258 * We setup stuff that we use a lot, to avoid calculating each time
2259 */
2260static void qib_7220_tidtemplate(struct qib_devdata *dd)
2261{
2262 if (dd->rcvegrbufsize == 2048)
2263 dd->tidtemplate = IBA7220_TID_SZ_2K;
2264 else if (dd->rcvegrbufsize == 4096)
2265 dd->tidtemplate = IBA7220_TID_SZ_4K;
2266 dd->tidinvalid = 0;
2267}
2268
2269/**
2270 * qib_init_7220_get_base_info - set chip-specific flags for user code
2271 * @rcd: the qlogic_ib ctxt
2272 * @kbase: qib_base_info pointer
2273 *
2274 * We set the PCIE flag because the lower bandwidth on PCIe vs
2275 * HyperTransport can affect some user packet algorithims.
2276 */
2277static int qib_7220_get_base_info(struct qib_ctxtdata *rcd,
2278 struct qib_base_info *kinfo)
2279{
2280 kinfo->spi_runtime_flags |= QIB_RUNTIME_PCIE |
2281 QIB_RUNTIME_NODMA_RTAIL | QIB_RUNTIME_SDMA;
2282
2283 if (rcd->dd->flags & QIB_USE_SPCL_TRIG)
2284 kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER;
2285
2286 return 0;
2287}
2288
2289static struct qib_message_header *
2290qib_7220_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr)
2291{
2292 u32 offset = qib_hdrget_offset(rhf_addr);
2293
2294 return (struct qib_message_header *)
2295 (rhf_addr - dd->rhf_offset + offset);
2296}
2297
2298static void qib_7220_config_ctxts(struct qib_devdata *dd)
2299{
2300 unsigned long flags;
2301 u32 nchipctxts;
2302
2303 nchipctxts = qib_read_kreg32(dd, kr_portcnt);
2304 dd->cspec->numctxts = nchipctxts;
2305 if (qib_n_krcv_queues > 1) {
Mike Marciniszyn2528ea62011-01-10 17:42:21 -08002306 dd->qpn_mask = 0x3e;
Ralph Campbellf9315512010-05-23 21:44:54 -07002307 dd->first_user_ctxt = qib_n_krcv_queues * dd->num_pports;
2308 if (dd->first_user_ctxt > nchipctxts)
2309 dd->first_user_ctxt = nchipctxts;
2310 } else
2311 dd->first_user_ctxt = dd->num_pports;
2312 dd->n_krcv_queues = dd->first_user_ctxt;
2313
2314 if (!qib_cfgctxts) {
2315 int nctxts = dd->first_user_ctxt + num_online_cpus();
2316
2317 if (nctxts <= 5)
2318 dd->ctxtcnt = 5;
2319 else if (nctxts <= 9)
2320 dd->ctxtcnt = 9;
2321 else if (nctxts <= nchipctxts)
2322 dd->ctxtcnt = nchipctxts;
2323 } else if (qib_cfgctxts <= nchipctxts)
2324 dd->ctxtcnt = qib_cfgctxts;
2325 if (!dd->ctxtcnt) /* none of the above, set to max */
2326 dd->ctxtcnt = nchipctxts;
2327
2328 /*
2329 * Chip can be configured for 5, 9, or 17 ctxts, and choice
2330 * affects number of eager TIDs per ctxt (1K, 2K, 4K).
2331 * Lock to be paranoid about later motion, etc.
2332 */
2333 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
2334 if (dd->ctxtcnt > 9)
2335 dd->rcvctrl |= 2ULL << IBA7220_R_CTXTCFG_SHIFT;
2336 else if (dd->ctxtcnt > 5)
2337 dd->rcvctrl |= 1ULL << IBA7220_R_CTXTCFG_SHIFT;
2338 /* else configure for default 5 receive ctxts */
2339 if (dd->qpn_mask)
2340 dd->rcvctrl |= 1ULL << QIB_7220_RcvCtrl_RcvQPMapEnable_LSB;
2341 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
2342 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
2343
2344 /* kr_rcvegrcnt changes based on the number of contexts enabled */
2345 dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt);
2346 dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, IBA7220_KRCVEGRCNT);
2347}
2348
2349static int qib_7220_get_ib_cfg(struct qib_pportdata *ppd, int which)
2350{
2351 int lsb, ret = 0;
2352 u64 maskr; /* right-justified mask */
2353
2354 switch (which) {
2355 case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */
2356 ret = ppd->link_width_enabled;
2357 goto done;
2358
2359 case QIB_IB_CFG_LWID: /* Get currently active Link-width */
2360 ret = ppd->link_width_active;
2361 goto done;
2362
2363 case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */
2364 ret = ppd->link_speed_enabled;
2365 goto done;
2366
2367 case QIB_IB_CFG_SPD: /* Get current Link spd */
2368 ret = ppd->link_speed_active;
2369 goto done;
2370
2371 case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */
2372 lsb = IBA7220_IBC_RXPOL_SHIFT;
2373 maskr = IBA7220_IBC_RXPOL_MASK;
2374 break;
2375
2376 case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */
2377 lsb = IBA7220_IBC_LREV_SHIFT;
2378 maskr = IBA7220_IBC_LREV_MASK;
2379 break;
2380
2381 case QIB_IB_CFG_LINKLATENCY:
2382 ret = qib_read_kreg64(ppd->dd, kr_ibcddrstatus)
2383 & IBA7220_DDRSTAT_LINKLAT_MASK;
2384 goto done;
2385
2386 case QIB_IB_CFG_OP_VLS:
2387 ret = ppd->vls_operational;
2388 goto done;
2389
2390 case QIB_IB_CFG_VL_HIGH_CAP:
2391 ret = 0;
2392 goto done;
2393
2394 case QIB_IB_CFG_VL_LOW_CAP:
2395 ret = 0;
2396 goto done;
2397
2398 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
2399 ret = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl,
2400 OverrunThreshold);
2401 goto done;
2402
2403 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
2404 ret = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl,
2405 PhyerrThreshold);
2406 goto done;
2407
2408 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
2409 /* will only take effect when the link state changes */
2410 ret = (ppd->cpspec->ibcctrl &
2411 SYM_MASK(IBCCtrl, LinkDownDefaultState)) ?
2412 IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL;
2413 goto done;
2414
2415 case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */
2416 lsb = IBA7220_IBC_HRTBT_SHIFT;
2417 maskr = IBA7220_IBC_HRTBT_MASK;
2418 break;
2419
2420 case QIB_IB_CFG_PMA_TICKS:
2421 /*
2422 * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs
2423 * Since the clock is always 250MHz, the value is 1 or 0.
2424 */
2425 ret = (ppd->link_speed_active == QIB_IB_DDR);
2426 goto done;
2427
2428 default:
2429 ret = -EINVAL;
2430 goto done;
2431 }
2432 ret = (int)((ppd->cpspec->ibcddrctrl >> lsb) & maskr);
2433done:
2434 return ret;
2435}
2436
2437static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
2438{
2439 struct qib_devdata *dd = ppd->dd;
2440 u64 maskr; /* right-justified mask */
2441 int lsb, ret = 0, setforce = 0;
2442 u16 lcmd, licmd;
2443 unsigned long flags;
Mitko Haralanove800bd02011-07-14 13:40:24 +00002444 u32 tmp = 0;
Ralph Campbellf9315512010-05-23 21:44:54 -07002445
2446 switch (which) {
2447 case QIB_IB_CFG_LIDLMC:
2448 /*
2449 * Set LID and LMC. Combined to avoid possible hazard
2450 * caller puts LMC in 16MSbits, DLID in 16LSbits of val
2451 */
2452 lsb = IBA7220_IBC_DLIDLMC_SHIFT;
2453 maskr = IBA7220_IBC_DLIDLMC_MASK;
2454 break;
2455
2456 case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */
2457 /*
2458 * As with speed, only write the actual register if
2459 * the link is currently down, otherwise takes effect
2460 * on next link change.
2461 */
2462 ppd->link_width_enabled = val;
2463 if (!(ppd->lflags & QIBL_LINKDOWN))
2464 goto bail;
2465 /*
2466 * We set the QIBL_IB_FORCE_NOTIFY bit so updown
2467 * will get called because we want update
2468 * link_width_active, and the change may not take
2469 * effect for some time (if we are in POLL), so this
2470 * flag will force the updown routine to be called
2471 * on the next ibstatuschange down interrupt, even
2472 * if it's not an down->up transition.
2473 */
2474 val--; /* convert from IB to chip */
2475 maskr = IBA7220_IBC_WIDTH_MASK;
2476 lsb = IBA7220_IBC_WIDTH_SHIFT;
2477 setforce = 1;
Ralph Campbellf9315512010-05-23 21:44:54 -07002478 break;
2479
2480 case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */
2481 /*
2482 * If we turn off IB1.2, need to preset SerDes defaults,
2483 * but not right now. Set a flag for the next time
2484 * we command the link down. As with width, only write the
2485 * actual register if the link is currently down, otherwise
2486 * takes effect on next link change. Since setting is being
Lucas De Marchi25985ed2011-03-30 22:57:33 -03002487 * explicitly requested (via MAD or sysfs), clear autoneg
Ralph Campbellf9315512010-05-23 21:44:54 -07002488 * failure status if speed autoneg is enabled.
2489 */
2490 ppd->link_speed_enabled = val;
2491 if ((ppd->cpspec->ibcddrctrl & IBA7220_IBC_IBTA_1_2_MASK) &&
2492 !(val & (val - 1)))
2493 dd->cspec->presets_needed = 1;
2494 if (!(ppd->lflags & QIBL_LINKDOWN))
2495 goto bail;
2496 /*
2497 * We set the QIBL_IB_FORCE_NOTIFY bit so updown
2498 * will get called because we want update
2499 * link_speed_active, and the change may not take
2500 * effect for some time (if we are in POLL), so this
2501 * flag will force the updown routine to be called
2502 * on the next ibstatuschange down interrupt, even
2503 * if it's not an down->up transition.
2504 */
2505 if (val == (QIB_IB_SDR | QIB_IB_DDR)) {
2506 val = IBA7220_IBC_SPEED_AUTONEG_MASK |
2507 IBA7220_IBC_IBTA_1_2_MASK;
2508 spin_lock_irqsave(&ppd->lflags_lock, flags);
2509 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
2510 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
2511 } else
2512 val = val == QIB_IB_DDR ?
2513 IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR;
2514 maskr = IBA7220_IBC_SPEED_AUTONEG_MASK |
2515 IBA7220_IBC_IBTA_1_2_MASK;
2516 /* IBTA 1.2 mode + speed bits are contiguous */
2517 lsb = SYM_LSB(IBCDDRCtrl, IB_ENHANCED_MODE);
2518 setforce = 1;
2519 break;
2520
2521 case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */
2522 lsb = IBA7220_IBC_RXPOL_SHIFT;
2523 maskr = IBA7220_IBC_RXPOL_MASK;
2524 break;
2525
2526 case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */
2527 lsb = IBA7220_IBC_LREV_SHIFT;
2528 maskr = IBA7220_IBC_LREV_MASK;
2529 break;
2530
2531 case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
2532 maskr = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl,
2533 OverrunThreshold);
2534 if (maskr != val) {
2535 ppd->cpspec->ibcctrl &=
2536 ~SYM_MASK(IBCCtrl, OverrunThreshold);
2537 ppd->cpspec->ibcctrl |= (u64) val <<
2538 SYM_LSB(IBCCtrl, OverrunThreshold);
2539 qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl);
2540 qib_write_kreg(dd, kr_scratch, 0);
2541 }
2542 goto bail;
2543
2544 case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
2545 maskr = SYM_FIELD(ppd->cpspec->ibcctrl, IBCCtrl,
2546 PhyerrThreshold);
2547 if (maskr != val) {
2548 ppd->cpspec->ibcctrl &=
2549 ~SYM_MASK(IBCCtrl, PhyerrThreshold);
2550 ppd->cpspec->ibcctrl |= (u64) val <<
2551 SYM_LSB(IBCCtrl, PhyerrThreshold);
2552 qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl);
2553 qib_write_kreg(dd, kr_scratch, 0);
2554 }
2555 goto bail;
2556
2557 case QIB_IB_CFG_PKEYS: /* update pkeys */
2558 maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) |
2559 ((u64) ppd->pkeys[2] << 32) |
2560 ((u64) ppd->pkeys[3] << 48);
2561 qib_write_kreg(dd, kr_partitionkey, maskr);
2562 goto bail;
2563
2564 case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
2565 /* will only take effect when the link state changes */
2566 if (val == IB_LINKINITCMD_POLL)
2567 ppd->cpspec->ibcctrl &=
2568 ~SYM_MASK(IBCCtrl, LinkDownDefaultState);
2569 else /* SLEEP */
2570 ppd->cpspec->ibcctrl |=
2571 SYM_MASK(IBCCtrl, LinkDownDefaultState);
2572 qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl);
2573 qib_write_kreg(dd, kr_scratch, 0);
2574 goto bail;
2575
2576 case QIB_IB_CFG_MTU: /* update the MTU in IBC */
2577 /*
2578 * Update our housekeeping variables, and set IBC max
2579 * size, same as init code; max IBC is max we allow in
2580 * buffer, less the qword pbc, plus 1 for ICRC, in dwords
2581 * Set even if it's unchanged, print debug message only
2582 * on changes.
2583 */
2584 val = (ppd->ibmaxlen >> 2) + 1;
2585 ppd->cpspec->ibcctrl &= ~SYM_MASK(IBCCtrl, MaxPktLen);
2586 ppd->cpspec->ibcctrl |= (u64)val << SYM_LSB(IBCCtrl, MaxPktLen);
2587 qib_write_kreg(dd, kr_ibcctrl, ppd->cpspec->ibcctrl);
2588 qib_write_kreg(dd, kr_scratch, 0);
2589 goto bail;
2590
2591 case QIB_IB_CFG_LSTATE: /* set the IB link state */
2592 switch (val & 0xffff0000) {
2593 case IB_LINKCMD_DOWN:
2594 lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN;
2595 if (!ppd->cpspec->ibdeltainprog &&
2596 qib_compat_ddr_negotiate) {
2597 ppd->cpspec->ibdeltainprog = 1;
2598 ppd->cpspec->ibsymsnap =
2599 read_7220_creg32(dd, cr_ibsymbolerr);
2600 ppd->cpspec->iblnkerrsnap =
2601 read_7220_creg32(dd, cr_iblinkerrrecov);
2602 }
2603 break;
2604
2605 case IB_LINKCMD_ARMED:
2606 lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED;
2607 break;
2608
2609 case IB_LINKCMD_ACTIVE:
2610 lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE;
2611 break;
2612
2613 default:
2614 ret = -EINVAL;
2615 qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16);
2616 goto bail;
2617 }
2618 switch (val & 0xffff) {
2619 case IB_LINKINITCMD_NOP:
2620 licmd = 0;
2621 break;
2622
2623 case IB_LINKINITCMD_POLL:
2624 licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL;
2625 break;
2626
2627 case IB_LINKINITCMD_SLEEP:
2628 licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP;
2629 break;
2630
2631 case IB_LINKINITCMD_DISABLE:
2632 licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE;
2633 ppd->cpspec->chase_end = 0;
2634 /*
2635 * stop state chase counter and timer, if running.
2636 * wait forpending timer, but don't clear .data (ppd)!
2637 */
2638 if (ppd->cpspec->chase_timer.expires) {
2639 del_timer_sync(&ppd->cpspec->chase_timer);
2640 ppd->cpspec->chase_timer.expires = 0;
2641 }
2642 break;
2643
2644 default:
2645 ret = -EINVAL;
2646 qib_dev_err(dd, "bad linkinitcmd req 0x%x\n",
2647 val & 0xffff);
2648 goto bail;
2649 }
2650 qib_set_ib_7220_lstate(ppd, lcmd, licmd);
Mitko Haralanove800bd02011-07-14 13:40:24 +00002651
2652 maskr = IBA7220_IBC_WIDTH_MASK;
2653 lsb = IBA7220_IBC_WIDTH_SHIFT;
2654 tmp = (ppd->cpspec->ibcddrctrl >> lsb) & maskr;
2655 /* If the width active on the chip does not match the
2656 * width in the shadow register, write the new active
2657 * width to the chip.
2658 * We don't have to worry about speed as the speed is taken
2659 * care of by set_7220_ibspeed_fast called by ib_updown.
2660 */
2661 if (ppd->link_width_enabled-1 != tmp) {
2662 ppd->cpspec->ibcddrctrl &= ~(maskr << lsb);
2663 ppd->cpspec->ibcddrctrl |=
2664 (((u64)(ppd->link_width_enabled-1) & maskr) <<
2665 lsb);
2666 qib_write_kreg(dd, kr_ibcddrctrl,
2667 ppd->cpspec->ibcddrctrl);
2668 qib_write_kreg(dd, kr_scratch, 0);
2669 spin_lock_irqsave(&ppd->lflags_lock, flags);
2670 ppd->lflags |= QIBL_IB_FORCE_NOTIFY;
2671 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
2672 }
Ralph Campbellf9315512010-05-23 21:44:54 -07002673 goto bail;
2674
2675 case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */
2676 if (val > IBA7220_IBC_HRTBT_MASK) {
2677 ret = -EINVAL;
2678 goto bail;
2679 }
2680 lsb = IBA7220_IBC_HRTBT_SHIFT;
2681 maskr = IBA7220_IBC_HRTBT_MASK;
2682 break;
2683
2684 default:
2685 ret = -EINVAL;
2686 goto bail;
2687 }
2688 ppd->cpspec->ibcddrctrl &= ~(maskr << lsb);
2689 ppd->cpspec->ibcddrctrl |= (((u64) val & maskr) << lsb);
2690 qib_write_kreg(dd, kr_ibcddrctrl, ppd->cpspec->ibcddrctrl);
2691 qib_write_kreg(dd, kr_scratch, 0);
2692 if (setforce) {
2693 spin_lock_irqsave(&ppd->lflags_lock, flags);
2694 ppd->lflags |= QIBL_IB_FORCE_NOTIFY;
2695 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
2696 }
2697bail:
2698 return ret;
2699}
2700
2701static int qib_7220_set_loopback(struct qib_pportdata *ppd, const char *what)
2702{
2703 int ret = 0;
2704 u64 val, ddr;
2705
2706 if (!strncmp(what, "ibc", 3)) {
2707 ppd->cpspec->ibcctrl |= SYM_MASK(IBCCtrl, Loopback);
2708 val = 0; /* disable heart beat, so link will come up */
2709 qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n",
2710 ppd->dd->unit, ppd->port);
2711 } else if (!strncmp(what, "off", 3)) {
2712 ppd->cpspec->ibcctrl &= ~SYM_MASK(IBCCtrl, Loopback);
2713 /* enable heart beat again */
2714 val = IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT;
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00002715 qib_devinfo(ppd->dd->pcidev,
2716 "Disabling IB%u:%u IBC loopback (normal)\n",
2717 ppd->dd->unit, ppd->port);
Ralph Campbellf9315512010-05-23 21:44:54 -07002718 } else
2719 ret = -EINVAL;
2720 if (!ret) {
2721 qib_write_kreg(ppd->dd, kr_ibcctrl, ppd->cpspec->ibcctrl);
2722 ddr = ppd->cpspec->ibcddrctrl & ~(IBA7220_IBC_HRTBT_MASK
2723 << IBA7220_IBC_HRTBT_SHIFT);
2724 ppd->cpspec->ibcddrctrl = ddr | val;
2725 qib_write_kreg(ppd->dd, kr_ibcddrctrl,
2726 ppd->cpspec->ibcddrctrl);
2727 qib_write_kreg(ppd->dd, kr_scratch, 0);
2728 }
2729 return ret;
2730}
2731
2732static void qib_update_7220_usrhead(struct qib_ctxtdata *rcd, u64 hd,
Mike Marciniszyn19ede2e2011-01-10 17:42:21 -08002733 u32 updegr, u32 egrhd, u32 npkts)
Ralph Campbellf9315512010-05-23 21:44:54 -07002734{
Ralph Campbellf9315512010-05-23 21:44:54 -07002735 if (updegr)
2736 qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt);
Ram Vepaeddfb672011-12-23 08:01:43 -05002737 mmiowb();
2738 qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
2739 mmiowb();
Ralph Campbellf9315512010-05-23 21:44:54 -07002740}
2741
2742static u32 qib_7220_hdrqempty(struct qib_ctxtdata *rcd)
2743{
2744 u32 head, tail;
2745
2746 head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt);
2747 if (rcd->rcvhdrtail_kvaddr)
2748 tail = qib_get_rcvhdrtail(rcd);
2749 else
2750 tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt);
2751 return head == tail;
2752}
2753
2754/*
2755 * Modify the RCVCTRL register in chip-specific way. This
2756 * is a function because bit positions and (future) register
2757 * location is chip-specifc, but the needed operations are
2758 * generic. <op> is a bit-mask because we often want to
2759 * do multiple modifications.
2760 */
2761static void rcvctrl_7220_mod(struct qib_pportdata *ppd, unsigned int op,
2762 int ctxt)
2763{
2764 struct qib_devdata *dd = ppd->dd;
2765 u64 mask, val;
2766 unsigned long flags;
2767
2768 spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
2769 if (op & QIB_RCVCTRL_TAILUPD_ENB)
2770 dd->rcvctrl |= (1ULL << IBA7220_R_TAILUPD_SHIFT);
2771 if (op & QIB_RCVCTRL_TAILUPD_DIS)
2772 dd->rcvctrl &= ~(1ULL << IBA7220_R_TAILUPD_SHIFT);
2773 if (op & QIB_RCVCTRL_PKEY_ENB)
2774 dd->rcvctrl &= ~(1ULL << IBA7220_R_PKEY_DIS_SHIFT);
2775 if (op & QIB_RCVCTRL_PKEY_DIS)
2776 dd->rcvctrl |= (1ULL << IBA7220_R_PKEY_DIS_SHIFT);
2777 if (ctxt < 0)
2778 mask = (1ULL << dd->ctxtcnt) - 1;
2779 else
2780 mask = (1ULL << ctxt);
2781 if (op & QIB_RCVCTRL_CTXT_ENB) {
2782 /* always done for specific ctxt */
2783 dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, PortEnable));
2784 if (!(dd->flags & QIB_NODMA_RTAIL))
2785 dd->rcvctrl |= 1ULL << IBA7220_R_TAILUPD_SHIFT;
2786 /* Write these registers before the context is enabled. */
2787 qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt,
2788 dd->rcd[ctxt]->rcvhdrqtailaddr_phys);
2789 qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt,
2790 dd->rcd[ctxt]->rcvhdrq_phys);
2791 dd->rcd[ctxt]->seq_cnt = 1;
2792 }
2793 if (op & QIB_RCVCTRL_CTXT_DIS)
2794 dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, PortEnable));
2795 if (op & QIB_RCVCTRL_INTRAVAIL_ENB)
2796 dd->rcvctrl |= (mask << IBA7220_R_INTRAVAIL_SHIFT);
2797 if (op & QIB_RCVCTRL_INTRAVAIL_DIS)
2798 dd->rcvctrl &= ~(mask << IBA7220_R_INTRAVAIL_SHIFT);
2799 qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
2800 if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && dd->rhdrhead_intr_off) {
2801 /* arm rcv interrupt */
2802 val = qib_read_ureg32(dd, ur_rcvhdrhead, ctxt) |
2803 dd->rhdrhead_intr_off;
2804 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
2805 }
2806 if (op & QIB_RCVCTRL_CTXT_ENB) {
2807 /*
2808 * Init the context registers also; if we were
2809 * disabled, tail and head should both be zero
2810 * already from the enable, but since we don't
Lucas De Marchi25985ed2011-03-30 22:57:33 -03002811 * know, we have to do it explicitly.
Ralph Campbellf9315512010-05-23 21:44:54 -07002812 */
2813 val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
2814 qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
2815
2816 val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt);
2817 dd->rcd[ctxt]->head = val;
2818 /* If kctxt, interrupt on next receive. */
2819 if (ctxt < dd->first_user_ctxt)
2820 val |= dd->rhdrhead_intr_off;
2821 qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
2822 }
2823 if (op & QIB_RCVCTRL_CTXT_DIS) {
2824 if (ctxt >= 0) {
2825 qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt, 0);
2826 qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt, 0);
2827 } else {
2828 unsigned i;
2829
2830 for (i = 0; i < dd->cfgctxts; i++) {
2831 qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr,
2832 i, 0);
2833 qib_write_kreg_ctxt(dd, kr_rcvhdraddr, i, 0);
2834 }
2835 }
2836 }
2837 spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
2838}
2839
2840/*
2841 * Modify the SENDCTRL register in chip-specific way. This
2842 * is a function there may be multiple such registers with
2843 * slightly different layouts. To start, we assume the
2844 * "canonical" register layout of the first chips.
2845 * Chip requires no back-back sendctrl writes, so write
2846 * scratch register after writing sendctrl
2847 */
2848static void sendctrl_7220_mod(struct qib_pportdata *ppd, u32 op)
2849{
2850 struct qib_devdata *dd = ppd->dd;
2851 u64 tmp_dd_sendctrl;
2852 unsigned long flags;
2853
2854 spin_lock_irqsave(&dd->sendctrl_lock, flags);
2855
2856 /* First the ones that are "sticky", saved in shadow */
2857 if (op & QIB_SENDCTRL_CLEAR)
2858 dd->sendctrl = 0;
2859 if (op & QIB_SENDCTRL_SEND_DIS)
2860 dd->sendctrl &= ~SYM_MASK(SendCtrl, SPioEnable);
2861 else if (op & QIB_SENDCTRL_SEND_ENB) {
2862 dd->sendctrl |= SYM_MASK(SendCtrl, SPioEnable);
2863 if (dd->flags & QIB_USE_SPCL_TRIG)
2864 dd->sendctrl |= SYM_MASK(SendCtrl,
2865 SSpecialTriggerEn);
2866 }
2867 if (op & QIB_SENDCTRL_AVAIL_DIS)
2868 dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
2869 else if (op & QIB_SENDCTRL_AVAIL_ENB)
2870 dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd);
2871
2872 if (op & QIB_SENDCTRL_DISARM_ALL) {
2873 u32 i, last;
2874
2875 tmp_dd_sendctrl = dd->sendctrl;
2876 /*
2877 * disarm any that are not yet launched, disabling sends
2878 * and updates until done.
2879 */
2880 last = dd->piobcnt2k + dd->piobcnt4k;
2881 tmp_dd_sendctrl &=
2882 ~(SYM_MASK(SendCtrl, SPioEnable) |
2883 SYM_MASK(SendCtrl, SendBufAvailUpd));
2884 for (i = 0; i < last; i++) {
2885 qib_write_kreg(dd, kr_sendctrl,
2886 tmp_dd_sendctrl |
2887 SYM_MASK(SendCtrl, Disarm) | i);
2888 qib_write_kreg(dd, kr_scratch, 0);
2889 }
2890 }
2891
2892 tmp_dd_sendctrl = dd->sendctrl;
2893
2894 if (op & QIB_SENDCTRL_FLUSH)
2895 tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Abort);
2896 if (op & QIB_SENDCTRL_DISARM)
2897 tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) |
2898 ((op & QIB_7220_SendCtrl_DisarmPIOBuf_RMASK) <<
2899 SYM_LSB(SendCtrl, DisarmPIOBuf));
2900 if ((op & QIB_SENDCTRL_AVAIL_BLIP) &&
2901 (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd)))
2902 tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd);
2903
2904 qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl);
2905 qib_write_kreg(dd, kr_scratch, 0);
2906
2907 if (op & QIB_SENDCTRL_AVAIL_BLIP) {
2908 qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
2909 qib_write_kreg(dd, kr_scratch, 0);
2910 }
2911
2912 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
2913
2914 if (op & QIB_SENDCTRL_FLUSH) {
2915 u32 v;
2916 /*
2917 * ensure writes have hit chip, then do a few
2918 * more reads, to allow DMA of pioavail registers
2919 * to occur, so in-memory copy is in sync with
2920 * the chip. Not always safe to sleep.
2921 */
2922 v = qib_read_kreg32(dd, kr_scratch);
2923 qib_write_kreg(dd, kr_scratch, v);
2924 v = qib_read_kreg32(dd, kr_scratch);
2925 qib_write_kreg(dd, kr_scratch, v);
2926 qib_read_kreg32(dd, kr_scratch);
2927 }
2928}
2929
2930/**
2931 * qib_portcntr_7220 - read a per-port counter
2932 * @dd: the qlogic_ib device
2933 * @creg: the counter to snapshot
2934 */
2935static u64 qib_portcntr_7220(struct qib_pportdata *ppd, u32 reg)
2936{
2937 u64 ret = 0ULL;
2938 struct qib_devdata *dd = ppd->dd;
2939 u16 creg;
2940 /* 0xffff for unimplemented or synthesized counters */
2941 static const u16 xlator[] = {
2942 [QIBPORTCNTR_PKTSEND] = cr_pktsend,
2943 [QIBPORTCNTR_WORDSEND] = cr_wordsend,
2944 [QIBPORTCNTR_PSXMITDATA] = cr_psxmitdatacount,
2945 [QIBPORTCNTR_PSXMITPKTS] = cr_psxmitpktscount,
2946 [QIBPORTCNTR_PSXMITWAIT] = cr_psxmitwaitcount,
2947 [QIBPORTCNTR_SENDSTALL] = cr_sendstall,
2948 [QIBPORTCNTR_PKTRCV] = cr_pktrcv,
2949 [QIBPORTCNTR_PSRCVDATA] = cr_psrcvdatacount,
2950 [QIBPORTCNTR_PSRCVPKTS] = cr_psrcvpktscount,
2951 [QIBPORTCNTR_RCVEBP] = cr_rcvebp,
2952 [QIBPORTCNTR_RCVOVFL] = cr_rcvovfl,
2953 [QIBPORTCNTR_WORDRCV] = cr_wordrcv,
2954 [QIBPORTCNTR_RXDROPPKT] = cr_rxdroppkt,
2955 [QIBPORTCNTR_RXLOCALPHYERR] = cr_rxotherlocalphyerr,
2956 [QIBPORTCNTR_RXVLERR] = cr_rxvlerr,
2957 [QIBPORTCNTR_ERRICRC] = cr_erricrc,
2958 [QIBPORTCNTR_ERRVCRC] = cr_errvcrc,
2959 [QIBPORTCNTR_ERRLPCRC] = cr_errlpcrc,
2960 [QIBPORTCNTR_BADFORMAT] = cr_badformat,
2961 [QIBPORTCNTR_ERR_RLEN] = cr_err_rlen,
2962 [QIBPORTCNTR_IBSYMBOLERR] = cr_ibsymbolerr,
2963 [QIBPORTCNTR_INVALIDRLEN] = cr_invalidrlen,
2964 [QIBPORTCNTR_UNSUPVL] = cr_txunsupvl,
2965 [QIBPORTCNTR_EXCESSBUFOVFL] = cr_excessbufferovfl,
2966 [QIBPORTCNTR_ERRLINK] = cr_errlink,
2967 [QIBPORTCNTR_IBLINKDOWN] = cr_iblinkdown,
2968 [QIBPORTCNTR_IBLINKERRRECOV] = cr_iblinkerrrecov,
2969 [QIBPORTCNTR_LLI] = cr_locallinkintegrityerr,
2970 [QIBPORTCNTR_PSINTERVAL] = cr_psinterval,
2971 [QIBPORTCNTR_PSSTART] = cr_psstart,
2972 [QIBPORTCNTR_PSSTAT] = cr_psstat,
2973 [QIBPORTCNTR_VL15PKTDROP] = cr_vl15droppedpkt,
2974 [QIBPORTCNTR_ERRPKEY] = cr_errpkey,
2975 [QIBPORTCNTR_KHDROVFL] = 0xffff,
2976 };
2977
2978 if (reg >= ARRAY_SIZE(xlator)) {
2979 qib_devinfo(ppd->dd->pcidev,
2980 "Unimplemented portcounter %u\n", reg);
2981 goto done;
2982 }
2983 creg = xlator[reg];
2984
2985 if (reg == QIBPORTCNTR_KHDROVFL) {
2986 int i;
2987
2988 /* sum over all kernel contexts */
2989 for (i = 0; i < dd->first_user_ctxt; i++)
2990 ret += read_7220_creg32(dd, cr_portovfl + i);
2991 }
2992 if (creg == 0xffff)
2993 goto done;
2994
2995 /*
2996 * only fast incrementing counters are 64bit; use 32 bit reads to
2997 * avoid two independent reads when on opteron
2998 */
2999 if ((creg == cr_wordsend || creg == cr_wordrcv ||
3000 creg == cr_pktsend || creg == cr_pktrcv))
3001 ret = read_7220_creg(dd, creg);
3002 else
3003 ret = read_7220_creg32(dd, creg);
3004 if (creg == cr_ibsymbolerr) {
3005 if (dd->pport->cpspec->ibdeltainprog)
3006 ret -= ret - ppd->cpspec->ibsymsnap;
3007 ret -= dd->pport->cpspec->ibsymdelta;
3008 } else if (creg == cr_iblinkerrrecov) {
3009 if (dd->pport->cpspec->ibdeltainprog)
3010 ret -= ret - ppd->cpspec->iblnkerrsnap;
3011 ret -= dd->pport->cpspec->iblnkerrdelta;
3012 }
3013done:
3014 return ret;
3015}
3016
3017/*
3018 * Device counter names (not port-specific), one line per stat,
3019 * single string. Used by utilities like ipathstats to print the stats
3020 * in a way which works for different versions of drivers, without changing
3021 * the utility. Names need to be 12 chars or less (w/o newline), for proper
3022 * display by utility.
3023 * Non-error counters are first.
3024 * Start of "error" conters is indicated by a leading "E " on the first
3025 * "error" counter, and doesn't count in label length.
3026 * The EgrOvfl list needs to be last so we truncate them at the configured
3027 * context count for the device.
3028 * cntr7220indices contains the corresponding register indices.
3029 */
3030static const char cntr7220names[] =
3031 "Interrupts\n"
3032 "HostBusStall\n"
3033 "E RxTIDFull\n"
3034 "RxTIDInvalid\n"
3035 "Ctxt0EgrOvfl\n"
3036 "Ctxt1EgrOvfl\n"
3037 "Ctxt2EgrOvfl\n"
3038 "Ctxt3EgrOvfl\n"
3039 "Ctxt4EgrOvfl\n"
3040 "Ctxt5EgrOvfl\n"
3041 "Ctxt6EgrOvfl\n"
3042 "Ctxt7EgrOvfl\n"
3043 "Ctxt8EgrOvfl\n"
3044 "Ctxt9EgrOvfl\n"
3045 "Ctx10EgrOvfl\n"
3046 "Ctx11EgrOvfl\n"
3047 "Ctx12EgrOvfl\n"
3048 "Ctx13EgrOvfl\n"
3049 "Ctx14EgrOvfl\n"
3050 "Ctx15EgrOvfl\n"
3051 "Ctx16EgrOvfl\n";
3052
3053static const size_t cntr7220indices[] = {
3054 cr_lbint,
3055 cr_lbflowstall,
3056 cr_errtidfull,
3057 cr_errtidvalid,
3058 cr_portovfl + 0,
3059 cr_portovfl + 1,
3060 cr_portovfl + 2,
3061 cr_portovfl + 3,
3062 cr_portovfl + 4,
3063 cr_portovfl + 5,
3064 cr_portovfl + 6,
3065 cr_portovfl + 7,
3066 cr_portovfl + 8,
3067 cr_portovfl + 9,
3068 cr_portovfl + 10,
3069 cr_portovfl + 11,
3070 cr_portovfl + 12,
3071 cr_portovfl + 13,
3072 cr_portovfl + 14,
3073 cr_portovfl + 15,
3074 cr_portovfl + 16,
3075};
3076
3077/*
3078 * same as cntr7220names and cntr7220indices, but for port-specific counters.
3079 * portcntr7220indices is somewhat complicated by some registers needing
3080 * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG
3081 */
3082static const char portcntr7220names[] =
3083 "TxPkt\n"
3084 "TxFlowPkt\n"
3085 "TxWords\n"
3086 "RxPkt\n"
3087 "RxFlowPkt\n"
3088 "RxWords\n"
3089 "TxFlowStall\n"
3090 "TxDmaDesc\n" /* 7220 and 7322-only */
3091 "E RxDlidFltr\n" /* 7220 and 7322-only */
3092 "IBStatusChng\n"
3093 "IBLinkDown\n"
3094 "IBLnkRecov\n"
3095 "IBRxLinkErr\n"
3096 "IBSymbolErr\n"
3097 "RxLLIErr\n"
3098 "RxBadFormat\n"
3099 "RxBadLen\n"
3100 "RxBufOvrfl\n"
3101 "RxEBP\n"
3102 "RxFlowCtlErr\n"
3103 "RxICRCerr\n"
3104 "RxLPCRCerr\n"
3105 "RxVCRCerr\n"
3106 "RxInvalLen\n"
3107 "RxInvalPKey\n"
3108 "RxPktDropped\n"
3109 "TxBadLength\n"
3110 "TxDropped\n"
3111 "TxInvalLen\n"
3112 "TxUnderrun\n"
3113 "TxUnsupVL\n"
3114 "RxLclPhyErr\n" /* 7220 and 7322-only */
3115 "RxVL15Drop\n" /* 7220 and 7322-only */
3116 "RxVlErr\n" /* 7220 and 7322-only */
3117 "XcessBufOvfl\n" /* 7220 and 7322-only */
3118 ;
3119
3120#define _PORT_VIRT_FLAG 0x8000 /* "virtual", need adjustments */
3121static const size_t portcntr7220indices[] = {
3122 QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG,
3123 cr_pktsendflow,
3124 QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG,
3125 QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG,
3126 cr_pktrcvflowctrl,
3127 QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG,
3128 QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG,
3129 cr_txsdmadesc,
3130 cr_rxdlidfltr,
3131 cr_ibstatuschange,
3132 QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG,
3133 QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG,
3134 QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG,
3135 QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG,
3136 QIBPORTCNTR_LLI | _PORT_VIRT_FLAG,
3137 QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG,
3138 QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG,
3139 QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG,
3140 QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG,
3141 cr_rcvflowctrl_err,
3142 QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG,
3143 QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG,
3144 QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG,
3145 QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG,
3146 QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG,
3147 QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG,
3148 cr_invalidslen,
3149 cr_senddropped,
3150 cr_errslen,
3151 cr_sendunderrun,
3152 cr_txunsupvl,
3153 QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG,
3154 QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG,
3155 QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG,
3156 QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG,
3157};
3158
3159/* do all the setup to make the counter reads efficient later */
3160static void init_7220_cntrnames(struct qib_devdata *dd)
3161{
3162 int i, j = 0;
3163 char *s;
3164
3165 for (i = 0, s = (char *)cntr7220names; s && j <= dd->cfgctxts;
3166 i++) {
3167 /* we always have at least one counter before the egrovfl */
3168 if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12))
3169 j = 1;
3170 s = strchr(s + 1, '\n');
3171 if (s && j)
3172 j++;
3173 }
3174 dd->cspec->ncntrs = i;
3175 if (!s)
3176 /* full list; size is without terminating null */
3177 dd->cspec->cntrnamelen = sizeof(cntr7220names) - 1;
3178 else
3179 dd->cspec->cntrnamelen = 1 + s - cntr7220names;
3180 dd->cspec->cntrs = kmalloc(dd->cspec->ncntrs
3181 * sizeof(u64), GFP_KERNEL);
3182 if (!dd->cspec->cntrs)
3183 qib_dev_err(dd, "Failed allocation for counters\n");
3184
3185 for (i = 0, s = (char *)portcntr7220names; s; i++)
3186 s = strchr(s + 1, '\n');
3187 dd->cspec->nportcntrs = i - 1;
3188 dd->cspec->portcntrnamelen = sizeof(portcntr7220names) - 1;
3189 dd->cspec->portcntrs = kmalloc(dd->cspec->nportcntrs
3190 * sizeof(u64), GFP_KERNEL);
3191 if (!dd->cspec->portcntrs)
3192 qib_dev_err(dd, "Failed allocation for portcounters\n");
3193}
3194
3195static u32 qib_read_7220cntrs(struct qib_devdata *dd, loff_t pos, char **namep,
3196 u64 **cntrp)
3197{
3198 u32 ret;
3199
3200 if (!dd->cspec->cntrs) {
3201 ret = 0;
3202 goto done;
3203 }
3204
3205 if (namep) {
3206 *namep = (char *)cntr7220names;
3207 ret = dd->cspec->cntrnamelen;
3208 if (pos >= ret)
3209 ret = 0; /* final read after getting everything */
3210 } else {
3211 u64 *cntr = dd->cspec->cntrs;
3212 int i;
3213
3214 ret = dd->cspec->ncntrs * sizeof(u64);
3215 if (!cntr || pos >= ret) {
3216 /* everything read, or couldn't get memory */
3217 ret = 0;
3218 goto done;
3219 }
3220
3221 *cntrp = cntr;
3222 for (i = 0; i < dd->cspec->ncntrs; i++)
3223 *cntr++ = read_7220_creg32(dd, cntr7220indices[i]);
3224 }
3225done:
3226 return ret;
3227}
3228
3229static u32 qib_read_7220portcntrs(struct qib_devdata *dd, loff_t pos, u32 port,
3230 char **namep, u64 **cntrp)
3231{
3232 u32 ret;
3233
3234 if (!dd->cspec->portcntrs) {
3235 ret = 0;
3236 goto done;
3237 }
3238 if (namep) {
3239 *namep = (char *)portcntr7220names;
3240 ret = dd->cspec->portcntrnamelen;
3241 if (pos >= ret)
3242 ret = 0; /* final read after getting everything */
3243 } else {
3244 u64 *cntr = dd->cspec->portcntrs;
3245 struct qib_pportdata *ppd = &dd->pport[port];
3246 int i;
3247
3248 ret = dd->cspec->nportcntrs * sizeof(u64);
3249 if (!cntr || pos >= ret) {
3250 /* everything read, or couldn't get memory */
3251 ret = 0;
3252 goto done;
3253 }
3254 *cntrp = cntr;
3255 for (i = 0; i < dd->cspec->nportcntrs; i++) {
3256 if (portcntr7220indices[i] & _PORT_VIRT_FLAG)
3257 *cntr++ = qib_portcntr_7220(ppd,
3258 portcntr7220indices[i] &
3259 ~_PORT_VIRT_FLAG);
3260 else
3261 *cntr++ = read_7220_creg32(dd,
3262 portcntr7220indices[i]);
3263 }
3264 }
3265done:
3266 return ret;
3267}
3268
3269/**
3270 * qib_get_7220_faststats - get word counters from chip before they overflow
3271 * @opaque - contains a pointer to the qlogic_ib device qib_devdata
3272 *
3273 * This needs more work; in particular, decision on whether we really
3274 * need traffic_wds done the way it is
3275 * called from add_timer
3276 */
3277static void qib_get_7220_faststats(unsigned long opaque)
3278{
3279 struct qib_devdata *dd = (struct qib_devdata *) opaque;
3280 struct qib_pportdata *ppd = dd->pport;
3281 unsigned long flags;
3282 u64 traffic_wds;
3283
3284 /*
3285 * don't access the chip while running diags, or memory diags can
3286 * fail
3287 */
3288 if (!(dd->flags & QIB_INITTED) || dd->diag_client)
3289 /* but re-arm the timer, for diags case; won't hurt other */
3290 goto done;
3291
3292 /*
3293 * We now try to maintain an activity timer, based on traffic
3294 * exceeding a threshold, so we need to check the word-counts
3295 * even if they are 64-bit.
3296 */
3297 traffic_wds = qib_portcntr_7220(ppd, cr_wordsend) +
3298 qib_portcntr_7220(ppd, cr_wordrcv);
3299 spin_lock_irqsave(&dd->eep_st_lock, flags);
3300 traffic_wds -= dd->traffic_wds;
3301 dd->traffic_wds += traffic_wds;
Ralph Campbellf9315512010-05-23 21:44:54 -07003302 spin_unlock_irqrestore(&dd->eep_st_lock, flags);
3303done:
3304 mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
3305}
3306
3307/*
3308 * If we are using MSI, try to fallback to INTx.
3309 */
3310static int qib_7220_intr_fallback(struct qib_devdata *dd)
3311{
3312 if (!dd->msi_lo)
3313 return 0;
3314
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00003315 qib_devinfo(dd->pcidev,
3316 "MSI interrupt not detected, trying INTx interrupts\n");
Ralph Campbellf9315512010-05-23 21:44:54 -07003317 qib_7220_free_irq(dd);
3318 qib_enable_intx(dd->pcidev);
3319 /*
3320 * Some newer kernels require free_irq before disable_msi,
3321 * and irq can be changed during disable and INTx enable
3322 * and we need to therefore use the pcidev->irq value,
3323 * not our saved MSI value.
3324 */
3325 dd->cspec->irq = dd->pcidev->irq;
3326 qib_setup_7220_interrupt(dd);
3327 return 1;
3328}
3329
3330/*
3331 * Reset the XGXS (between serdes and IBC). Slightly less intrusive
3332 * than resetting the IBC or external link state, and useful in some
3333 * cases to cause some retraining. To do this right, we reset IBC
3334 * as well.
3335 */
3336static void qib_7220_xgxs_reset(struct qib_pportdata *ppd)
3337{
3338 u64 val, prev_val;
3339 struct qib_devdata *dd = ppd->dd;
3340
3341 prev_val = qib_read_kreg64(dd, kr_xgxs_cfg);
3342 val = prev_val | QLOGIC_IB_XGXS_RESET;
3343 prev_val &= ~QLOGIC_IB_XGXS_RESET; /* be sure */
3344 qib_write_kreg(dd, kr_control,
3345 dd->control & ~QLOGIC_IB_C_LINKENABLE);
3346 qib_write_kreg(dd, kr_xgxs_cfg, val);
3347 qib_read_kreg32(dd, kr_scratch);
3348 qib_write_kreg(dd, kr_xgxs_cfg, prev_val);
3349 qib_write_kreg(dd, kr_control, dd->control);
3350}
3351
3352/*
3353 * For this chip, we want to use the same buffer every time
3354 * when we are trying to bring the link up (they are always VL15
3355 * packets). At that link state the packet should always go out immediately
3356 * (or at least be discarded at the tx interface if the link is down).
3357 * If it doesn't, and the buffer isn't available, that means some other
3358 * sender has gotten ahead of us, and is preventing our packet from going
3359 * out. In that case, we flush all packets, and try again. If that still
3360 * fails, we fail the request, and hope things work the next time around.
3361 *
3362 * We don't need very complicated heuristics on whether the packet had
3363 * time to go out or not, since even at SDR 1X, it goes out in very short
3364 * time periods, covered by the chip reads done here and as part of the
3365 * flush.
3366 */
3367static u32 __iomem *get_7220_link_buf(struct qib_pportdata *ppd, u32 *bnum)
3368{
3369 u32 __iomem *buf;
3370 u32 lbuf = ppd->dd->cspec->lastbuf_for_pio;
3371 int do_cleanup;
3372 unsigned long flags;
3373
3374 /*
3375 * always blip to get avail list updated, since it's almost
3376 * always needed, and is fairly cheap.
3377 */
3378 sendctrl_7220_mod(ppd->dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
3379 qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */
3380 buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf);
3381 if (buf)
3382 goto done;
3383
3384 spin_lock_irqsave(&ppd->sdma_lock, flags);
3385 if (ppd->sdma_state.current_state == qib_sdma_state_s20_idle &&
3386 ppd->sdma_state.current_state != qib_sdma_state_s00_hw_down) {
3387 __qib_sdma_process_event(ppd, qib_sdma_event_e00_go_hw_down);
3388 do_cleanup = 0;
3389 } else {
3390 do_cleanup = 1;
3391 qib_7220_sdma_hw_clean_up(ppd);
3392 }
3393 spin_unlock_irqrestore(&ppd->sdma_lock, flags);
3394
3395 if (do_cleanup) {
3396 qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */
3397 buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf);
3398 }
3399done:
3400 return buf;
3401}
3402
3403/*
3404 * This code for non-IBTA-compliant IB speed negotiation is only known to
3405 * work for the SDR to DDR transition, and only between an HCA and a switch
3406 * with recent firmware. It is based on observed heuristics, rather than
3407 * actual knowledge of the non-compliant speed negotiation.
3408 * It has a number of hard-coded fields, since the hope is to rewrite this
3409 * when a spec is available on how the negoation is intended to work.
3410 */
3411static void autoneg_7220_sendpkt(struct qib_pportdata *ppd, u32 *hdr,
3412 u32 dcnt, u32 *data)
3413{
3414 int i;
3415 u64 pbc;
3416 u32 __iomem *piobuf;
3417 u32 pnum;
3418 struct qib_devdata *dd = ppd->dd;
3419
3420 i = 0;
3421 pbc = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */
3422 pbc |= PBC_7220_VL15_SEND;
3423 while (!(piobuf = get_7220_link_buf(ppd, &pnum))) {
3424 if (i++ > 5)
3425 return;
3426 udelay(2);
3427 }
3428 sendctrl_7220_mod(dd->pport, QIB_SENDCTRL_DISARM_BUF(pnum));
3429 writeq(pbc, piobuf);
3430 qib_flush_wc();
3431 qib_pio_copy(piobuf + 2, hdr, 7);
3432 qib_pio_copy(piobuf + 9, data, dcnt);
3433 if (dd->flags & QIB_USE_SPCL_TRIG) {
3434 u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023;
3435
3436 qib_flush_wc();
3437 __raw_writel(0xaebecede, piobuf + spcl_off);
3438 }
3439 qib_flush_wc();
3440 qib_sendbuf_done(dd, pnum);
3441}
3442
3443/*
3444 * _start packet gets sent twice at start, _done gets sent twice at end
3445 */
3446static void autoneg_7220_send(struct qib_pportdata *ppd, int which)
3447{
3448 struct qib_devdata *dd = ppd->dd;
3449 static u32 swapped;
3450 u32 dw, i, hcnt, dcnt, *data;
3451 static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba };
3452 static u32 madpayload_start[0x40] = {
3453 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
3454 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
3455 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */
3456 };
3457 static u32 madpayload_done[0x40] = {
3458 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
3459 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
3460 0x40000001, 0x1388, 0x15e, /* rest 0's */
3461 };
3462
3463 dcnt = ARRAY_SIZE(madpayload_start);
3464 hcnt = ARRAY_SIZE(hdr);
3465 if (!swapped) {
3466 /* for maintainability, do it at runtime */
3467 for (i = 0; i < hcnt; i++) {
3468 dw = (__force u32) cpu_to_be32(hdr[i]);
3469 hdr[i] = dw;
3470 }
3471 for (i = 0; i < dcnt; i++) {
3472 dw = (__force u32) cpu_to_be32(madpayload_start[i]);
3473 madpayload_start[i] = dw;
3474 dw = (__force u32) cpu_to_be32(madpayload_done[i]);
3475 madpayload_done[i] = dw;
3476 }
3477 swapped = 1;
3478 }
3479
3480 data = which ? madpayload_done : madpayload_start;
3481
3482 autoneg_7220_sendpkt(ppd, hdr, dcnt, data);
3483 qib_read_kreg64(dd, kr_scratch);
3484 udelay(2);
3485 autoneg_7220_sendpkt(ppd, hdr, dcnt, data);
3486 qib_read_kreg64(dd, kr_scratch);
3487 udelay(2);
3488}
3489
3490/*
3491 * Do the absolute minimum to cause an IB speed change, and make it
3492 * ready, but don't actually trigger the change. The caller will
3493 * do that when ready (if link is in Polling training state, it will
3494 * happen immediately, otherwise when link next goes down)
3495 *
3496 * This routine should only be used as part of the DDR autonegotation
3497 * code for devices that are not compliant with IB 1.2 (or code that
3498 * fixes things up for same).
3499 *
3500 * When link has gone down, and autoneg enabled, or autoneg has
3501 * failed and we give up until next time we set both speeds, and
3502 * then we want IBTA enabled as well as "use max enabled speed.
3503 */
3504static void set_7220_ibspeed_fast(struct qib_pportdata *ppd, u32 speed)
3505{
3506 ppd->cpspec->ibcddrctrl &= ~(IBA7220_IBC_SPEED_AUTONEG_MASK |
3507 IBA7220_IBC_IBTA_1_2_MASK);
3508
3509 if (speed == (QIB_IB_SDR | QIB_IB_DDR))
3510 ppd->cpspec->ibcddrctrl |= IBA7220_IBC_SPEED_AUTONEG_MASK |
3511 IBA7220_IBC_IBTA_1_2_MASK;
3512 else
3513 ppd->cpspec->ibcddrctrl |= speed == QIB_IB_DDR ?
3514 IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR;
3515
3516 qib_write_kreg(ppd->dd, kr_ibcddrctrl, ppd->cpspec->ibcddrctrl);
3517 qib_write_kreg(ppd->dd, kr_scratch, 0);
3518}
3519
3520/*
3521 * This routine is only used when we are not talking to another
3522 * IB 1.2-compliant device that we think can do DDR.
3523 * (This includes all existing switch chips as of Oct 2007.)
3524 * 1.2-compliant devices go directly to DDR prior to reaching INIT
3525 */
3526static void try_7220_autoneg(struct qib_pportdata *ppd)
3527{
3528 unsigned long flags;
3529
3530 /*
3531 * Required for older non-IB1.2 DDR switches. Newer
3532 * non-IB-compliant switches don't need it, but so far,
3533 * aren't bothered by it either. "Magic constant"
3534 */
3535 qib_write_kreg(ppd->dd, kr_ncmodectrl, 0x3b9dc07);
3536
3537 spin_lock_irqsave(&ppd->lflags_lock, flags);
3538 ppd->lflags |= QIBL_IB_AUTONEG_INPROG;
3539 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
3540 autoneg_7220_send(ppd, 0);
3541 set_7220_ibspeed_fast(ppd, QIB_IB_DDR);
3542
3543 toggle_7220_rclkrls(ppd->dd);
3544 /* 2 msec is minimum length of a poll cycle */
Tejun Heof0626712010-10-19 15:24:36 +00003545 queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work,
3546 msecs_to_jiffies(2));
Ralph Campbellf9315512010-05-23 21:44:54 -07003547}
3548
3549/*
3550 * Handle the empirically determined mechanism for auto-negotiation
3551 * of DDR speed with switches.
3552 */
3553static void autoneg_7220_work(struct work_struct *work)
3554{
3555 struct qib_pportdata *ppd;
3556 struct qib_devdata *dd;
3557 u64 startms;
3558 u32 i;
3559 unsigned long flags;
3560
3561 ppd = &container_of(work, struct qib_chippport_specific,
3562 autoneg_work.work)->pportdata;
3563 dd = ppd->dd;
3564
3565 startms = jiffies_to_msecs(jiffies);
3566
3567 /*
3568 * Busy wait for this first part, it should be at most a
3569 * few hundred usec, since we scheduled ourselves for 2msec.
3570 */
3571 for (i = 0; i < 25; i++) {
3572 if (SYM_FIELD(ppd->lastibcstat, IBCStatus, LinkTrainingState)
3573 == IB_7220_LT_STATE_POLLQUIET) {
3574 qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE);
3575 break;
3576 }
3577 udelay(100);
3578 }
3579
3580 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
3581 goto done; /* we got there early or told to stop */
3582
3583 /* we expect this to timeout */
3584 if (wait_event_timeout(ppd->cpspec->autoneg_wait,
3585 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
3586 msecs_to_jiffies(90)))
3587 goto done;
3588
3589 toggle_7220_rclkrls(dd);
3590
3591 /* we expect this to timeout */
3592 if (wait_event_timeout(ppd->cpspec->autoneg_wait,
3593 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
3594 msecs_to_jiffies(1700)))
3595 goto done;
3596
3597 set_7220_ibspeed_fast(ppd, QIB_IB_SDR);
3598 toggle_7220_rclkrls(dd);
3599
3600 /*
3601 * Wait up to 250 msec for link to train and get to INIT at DDR;
3602 * this should terminate early.
3603 */
3604 wait_event_timeout(ppd->cpspec->autoneg_wait,
3605 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG),
3606 msecs_to_jiffies(250));
3607done:
3608 if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) {
3609 spin_lock_irqsave(&ppd->lflags_lock, flags);
3610 ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG;
3611 if (dd->cspec->autoneg_tries == AUTONEG_TRIES) {
3612 ppd->lflags |= QIBL_IB_AUTONEG_FAILED;
3613 dd->cspec->autoneg_tries = 0;
3614 }
3615 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
3616 set_7220_ibspeed_fast(ppd, ppd->link_speed_enabled);
3617 }
3618}
3619
3620static u32 qib_7220_iblink_state(u64 ibcs)
3621{
3622 u32 state = (u32)SYM_FIELD(ibcs, IBCStatus, LinkState);
3623
3624 switch (state) {
3625 case IB_7220_L_STATE_INIT:
3626 state = IB_PORT_INIT;
3627 break;
3628 case IB_7220_L_STATE_ARM:
3629 state = IB_PORT_ARMED;
3630 break;
3631 case IB_7220_L_STATE_ACTIVE:
3632 /* fall through */
3633 case IB_7220_L_STATE_ACT_DEFER:
3634 state = IB_PORT_ACTIVE;
3635 break;
3636 default: /* fall through */
3637 case IB_7220_L_STATE_DOWN:
3638 state = IB_PORT_DOWN;
3639 break;
3640 }
3641 return state;
3642}
3643
3644/* returns the IBTA port state, rather than the IBC link training state */
3645static u8 qib_7220_phys_portstate(u64 ibcs)
3646{
3647 u8 state = (u8)SYM_FIELD(ibcs, IBCStatus, LinkTrainingState);
3648 return qib_7220_physportstate[state];
3649}
3650
3651static int qib_7220_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs)
3652{
3653 int ret = 0, symadj = 0;
3654 struct qib_devdata *dd = ppd->dd;
3655 unsigned long flags;
3656
3657 spin_lock_irqsave(&ppd->lflags_lock, flags);
3658 ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY;
3659 spin_unlock_irqrestore(&ppd->lflags_lock, flags);
3660
3661 if (!ibup) {
3662 /*
3663 * When the link goes down we don't want AEQ running, so it
3664 * won't interfere with IBC training, etc., and we need
3665 * to go back to the static SerDes preset values.
3666 */
3667 if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED |
3668 QIBL_IB_AUTONEG_INPROG)))
3669 set_7220_ibspeed_fast(ppd, ppd->link_speed_enabled);
3670 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
3671 qib_sd7220_presets(dd);
3672 qib_cancel_sends(ppd); /* initial disarm, etc. */
3673 spin_lock_irqsave(&ppd->sdma_lock, flags);
3674 if (__qib_sdma_running(ppd))
3675 __qib_sdma_process_event(ppd,
3676 qib_sdma_event_e70_go_idle);
3677 spin_unlock_irqrestore(&ppd->sdma_lock, flags);
3678 }
3679 /* this might better in qib_sd7220_presets() */
3680 set_7220_relock_poll(dd, ibup);
3681 } else {
3682 if (qib_compat_ddr_negotiate &&
3683 !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED |
3684 QIBL_IB_AUTONEG_INPROG)) &&
3685 ppd->link_speed_active == QIB_IB_SDR &&
3686 (ppd->link_speed_enabled & (QIB_IB_DDR | QIB_IB_SDR)) ==
3687 (QIB_IB_DDR | QIB_IB_SDR) &&
3688 dd->cspec->autoneg_tries < AUTONEG_TRIES) {
3689 /* we are SDR, and DDR auto-negotiation enabled */
3690 ++dd->cspec->autoneg_tries;
3691 if (!ppd->cpspec->ibdeltainprog) {
3692 ppd->cpspec->ibdeltainprog = 1;
3693 ppd->cpspec->ibsymsnap = read_7220_creg32(dd,
3694 cr_ibsymbolerr);
3695 ppd->cpspec->iblnkerrsnap = read_7220_creg32(dd,
3696 cr_iblinkerrrecov);
3697 }
3698 try_7220_autoneg(ppd);
3699 ret = 1; /* no other IB status change processing */
3700 } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) &&
3701 ppd->link_speed_active == QIB_IB_SDR) {
3702 autoneg_7220_send(ppd, 1);
3703 set_7220_ibspeed_fast(ppd, QIB_IB_DDR);
3704 udelay(2);
3705 toggle_7220_rclkrls(dd);
3706 ret = 1; /* no other IB status change processing */
3707 } else {
3708 if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) &&
3709 (ppd->link_speed_active & QIB_IB_DDR)) {
3710 spin_lock_irqsave(&ppd->lflags_lock, flags);
3711 ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG |
3712 QIBL_IB_AUTONEG_FAILED);
3713 spin_unlock_irqrestore(&ppd->lflags_lock,
3714 flags);
3715 dd->cspec->autoneg_tries = 0;
3716 /* re-enable SDR, for next link down */
3717 set_7220_ibspeed_fast(ppd,
3718 ppd->link_speed_enabled);
3719 wake_up(&ppd->cpspec->autoneg_wait);
3720 symadj = 1;
3721 } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) {
3722 /*
3723 * Clear autoneg failure flag, and do setup
3724 * so we'll try next time link goes down and
3725 * back to INIT (possibly connected to a
3726 * different device).
3727 */
3728 spin_lock_irqsave(&ppd->lflags_lock, flags);
3729 ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED;
3730 spin_unlock_irqrestore(&ppd->lflags_lock,
3731 flags);
3732 ppd->cpspec->ibcddrctrl |=
3733 IBA7220_IBC_IBTA_1_2_MASK;
3734 qib_write_kreg(dd, kr_ncmodectrl, 0);
3735 symadj = 1;
3736 }
3737 }
3738
3739 if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG))
3740 symadj = 1;
3741
3742 if (!ret) {
3743 ppd->delay_mult = rate_to_delay
3744 [(ibcs >> IBA7220_LINKSPEED_SHIFT) & 1]
3745 [(ibcs >> IBA7220_LINKWIDTH_SHIFT) & 1];
3746
3747 set_7220_relock_poll(dd, ibup);
3748 spin_lock_irqsave(&ppd->sdma_lock, flags);
3749 /*
3750 * Unlike 7322, the 7220 needs this, due to lack of
3751 * interrupt in some cases when we have sdma active
3752 * when the link goes down.
3753 */
3754 if (ppd->sdma_state.current_state !=
3755 qib_sdma_state_s20_idle)
3756 __qib_sdma_process_event(ppd,
3757 qib_sdma_event_e00_go_hw_down);
3758 spin_unlock_irqrestore(&ppd->sdma_lock, flags);
3759 }
3760 }
3761
3762 if (symadj) {
3763 if (ppd->cpspec->ibdeltainprog) {
3764 ppd->cpspec->ibdeltainprog = 0;
3765 ppd->cpspec->ibsymdelta += read_7220_creg32(ppd->dd,
3766 cr_ibsymbolerr) - ppd->cpspec->ibsymsnap;
3767 ppd->cpspec->iblnkerrdelta += read_7220_creg32(ppd->dd,
3768 cr_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap;
3769 }
3770 } else if (!ibup && qib_compat_ddr_negotiate &&
3771 !ppd->cpspec->ibdeltainprog &&
3772 !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
3773 ppd->cpspec->ibdeltainprog = 1;
3774 ppd->cpspec->ibsymsnap = read_7220_creg32(ppd->dd,
3775 cr_ibsymbolerr);
3776 ppd->cpspec->iblnkerrsnap = read_7220_creg32(ppd->dd,
3777 cr_iblinkerrrecov);
3778 }
3779
3780 if (!ret)
3781 qib_setup_7220_setextled(ppd, ibup);
3782 return ret;
3783}
3784
3785/*
3786 * Does read/modify/write to appropriate registers to
3787 * set output and direction bits selected by mask.
3788 * these are in their canonical postions (e.g. lsb of
3789 * dir will end up in D48 of extctrl on existing chips).
3790 * returns contents of GP Inputs.
3791 */
3792static int gpio_7220_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask)
3793{
3794 u64 read_val, new_out;
3795 unsigned long flags;
3796
3797 if (mask) {
3798 /* some bits being written, lock access to GPIO */
3799 dir &= mask;
3800 out &= mask;
3801 spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
3802 dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe));
3803 dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe));
3804 new_out = (dd->cspec->gpio_out & ~mask) | out;
3805
3806 qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
3807 qib_write_kreg(dd, kr_gpio_out, new_out);
3808 dd->cspec->gpio_out = new_out;
3809 spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
3810 }
3811 /*
3812 * It is unlikely that a read at this time would get valid
3813 * data on a pin whose direction line was set in the same
3814 * call to this function. We include the read here because
3815 * that allows us to potentially combine a change on one pin with
3816 * a read on another, and because the old code did something like
3817 * this.
3818 */
3819 read_val = qib_read_kreg64(dd, kr_extstatus);
3820 return SYM_FIELD(read_val, EXTStatus, GPIOIn);
3821}
3822
3823/*
3824 * Read fundamental info we need to use the chip. These are
3825 * the registers that describe chip capabilities, and are
3826 * saved in shadow registers.
3827 */
3828static void get_7220_chip_params(struct qib_devdata *dd)
3829{
3830 u64 val;
3831 u32 piobufs;
3832 int mtu;
3833
3834 dd->uregbase = qib_read_kreg32(dd, kr_userregbase);
3835
3836 dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt);
3837 dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase);
3838 dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase);
3839 dd->palign = qib_read_kreg32(dd, kr_palign);
3840 dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase);
3841 dd->pio2k_bufbase = dd->piobufbase & 0xffffffff;
3842
3843 val = qib_read_kreg64(dd, kr_sendpiosize);
3844 dd->piosize2k = val & ~0U;
3845 dd->piosize4k = val >> 32;
3846
3847 mtu = ib_mtu_enum_to_int(qib_ibmtu);
3848 if (mtu == -1)
3849 mtu = QIB_DEFAULT_MTU;
3850 dd->pport->ibmtu = (u32)mtu;
3851
3852 val = qib_read_kreg64(dd, kr_sendpiobufcnt);
3853 dd->piobcnt2k = val & ~0U;
3854 dd->piobcnt4k = val >> 32;
3855 /* these may be adjusted in init_chip_wc_pat() */
3856 dd->pio2kbase = (u32 __iomem *)
3857 ((char __iomem *) dd->kregbase + dd->pio2k_bufbase);
3858 if (dd->piobcnt4k) {
3859 dd->pio4kbase = (u32 __iomem *)
3860 ((char __iomem *) dd->kregbase +
3861 (dd->piobufbase >> 32));
3862 /*
3863 * 4K buffers take 2 pages; we use roundup just to be
3864 * paranoid; we calculate it once here, rather than on
3865 * ever buf allocate
3866 */
3867 dd->align4k = ALIGN(dd->piosize4k, dd->palign);
3868 }
3869
3870 piobufs = dd->piobcnt4k + dd->piobcnt2k;
3871
3872 dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) /
3873 (sizeof(u64) * BITS_PER_BYTE / 2);
3874}
3875
3876/*
3877 * The chip base addresses in cspec and cpspec have to be set
3878 * after possible init_chip_wc_pat(), rather than in
3879 * qib_get_7220_chip_params(), so split out as separate function
3880 */
3881static void set_7220_baseaddrs(struct qib_devdata *dd)
3882{
3883 u32 cregbase;
3884 /* init after possible re-map in init_chip_wc_pat() */
3885 cregbase = qib_read_kreg32(dd, kr_counterregbase);
3886 dd->cspec->cregbase = (u64 __iomem *)
3887 ((char __iomem *) dd->kregbase + cregbase);
3888
3889 dd->egrtidbase = (u64 __iomem *)
3890 ((char __iomem *) dd->kregbase + dd->rcvegrbase);
3891}
3892
3893
3894#define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl, SendIntBufAvail) | \
3895 SYM_MASK(SendCtrl, SPioEnable) | \
3896 SYM_MASK(SendCtrl, SSpecialTriggerEn) | \
3897 SYM_MASK(SendCtrl, SendBufAvailUpd) | \
3898 SYM_MASK(SendCtrl, AvailUpdThld) | \
3899 SYM_MASK(SendCtrl, SDmaEnable) | \
3900 SYM_MASK(SendCtrl, SDmaIntEnable) | \
3901 SYM_MASK(SendCtrl, SDmaHalt) | \
3902 SYM_MASK(SendCtrl, SDmaSingleDescriptor))
3903
3904static int sendctrl_hook(struct qib_devdata *dd,
3905 const struct diag_observer *op,
3906 u32 offs, u64 *data, u64 mask, int only_32)
3907{
3908 unsigned long flags;
3909 unsigned idx = offs / sizeof(u64);
3910 u64 local_data, all_bits;
3911
3912 if (idx != kr_sendctrl) {
3913 qib_dev_err(dd, "SendCtrl Hook called with offs %X, %s-bit\n",
3914 offs, only_32 ? "32" : "64");
3915 return 0;
3916 }
3917
3918 all_bits = ~0ULL;
3919 if (only_32)
3920 all_bits >>= 32;
3921 spin_lock_irqsave(&dd->sendctrl_lock, flags);
3922 if ((mask & all_bits) != all_bits) {
3923 /*
3924 * At least some mask bits are zero, so we need
3925 * to read. The judgement call is whether from
3926 * reg or shadow. First-cut: read reg, and complain
3927 * if any bits which should be shadowed are different
3928 * from their shadowed value.
3929 */
3930 if (only_32)
3931 local_data = (u64)qib_read_kreg32(dd, idx);
3932 else
3933 local_data = qib_read_kreg64(dd, idx);
3934 qib_dev_err(dd, "Sendctrl -> %X, Shad -> %X\n",
3935 (u32)local_data, (u32)dd->sendctrl);
3936 if ((local_data & SENDCTRL_SHADOWED) !=
3937 (dd->sendctrl & SENDCTRL_SHADOWED))
3938 qib_dev_err(dd, "Sendctrl read: %X shadow is %X\n",
3939 (u32)local_data, (u32) dd->sendctrl);
3940 *data = (local_data & ~mask) | (*data & mask);
3941 }
3942 if (mask) {
3943 /*
3944 * At least some mask bits are one, so we need
3945 * to write, but only shadow some bits.
3946 */
3947 u64 sval, tval; /* Shadowed, transient */
3948
3949 /*
3950 * New shadow val is bits we don't want to touch,
3951 * ORed with bits we do, that are intended for shadow.
3952 */
3953 sval = (dd->sendctrl & ~mask);
3954 sval |= *data & SENDCTRL_SHADOWED & mask;
3955 dd->sendctrl = sval;
3956 tval = sval | (*data & ~SENDCTRL_SHADOWED & mask);
3957 qib_dev_err(dd, "Sendctrl <- %X, Shad <- %X\n",
3958 (u32)tval, (u32)sval);
3959 qib_write_kreg(dd, kr_sendctrl, tval);
3960 qib_write_kreg(dd, kr_scratch, 0Ull);
3961 }
3962 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
3963
3964 return only_32 ? 4 : 8;
3965}
3966
3967static const struct diag_observer sendctrl_observer = {
3968 sendctrl_hook, kr_sendctrl * sizeof(u64),
3969 kr_sendctrl * sizeof(u64)
3970};
3971
3972/*
3973 * write the final few registers that depend on some of the
3974 * init setup. Done late in init, just before bringing up
3975 * the serdes.
3976 */
3977static int qib_late_7220_initreg(struct qib_devdata *dd)
3978{
3979 int ret = 0;
3980 u64 val;
3981
3982 qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize);
3983 qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize);
3984 qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt);
3985 qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
3986 val = qib_read_kreg64(dd, kr_sendpioavailaddr);
3987 if (val != dd->pioavailregs_phys) {
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00003988 qib_dev_err(dd,
3989 "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n",
3990 (unsigned long) dd->pioavailregs_phys,
3991 (unsigned long long) val);
Ralph Campbellf9315512010-05-23 21:44:54 -07003992 ret = -EINVAL;
3993 }
3994 qib_register_observer(dd, &sendctrl_observer);
3995 return ret;
3996}
3997
3998static int qib_init_7220_variables(struct qib_devdata *dd)
3999{
4000 struct qib_chippport_specific *cpspec;
4001 struct qib_pportdata *ppd;
4002 int ret = 0;
4003 u32 sbufs, updthresh;
4004
4005 cpspec = (struct qib_chippport_specific *)(dd + 1);
4006 ppd = &cpspec->pportdata;
4007 dd->pport = ppd;
4008 dd->num_pports = 1;
4009
4010 dd->cspec = (struct qib_chip_specific *)(cpspec + dd->num_pports);
4011 ppd->cpspec = cpspec;
4012
4013 spin_lock_init(&dd->cspec->sdepb_lock);
4014 spin_lock_init(&dd->cspec->rcvmod_lock);
4015 spin_lock_init(&dd->cspec->gpio_lock);
4016
4017 /* we haven't yet set QIB_PRESENT, so use read directly */
4018 dd->revision = readq(&dd->kregbase[kr_revision]);
4019
4020 if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00004021 qib_dev_err(dd,
4022 "Revision register read failure, giving up initialization\n");
Ralph Campbellf9315512010-05-23 21:44:54 -07004023 ret = -ENODEV;
4024 goto bail;
4025 }
4026 dd->flags |= QIB_PRESENT; /* now register routines work */
4027
4028 dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R,
4029 ChipRevMajor);
4030 dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R,
4031 ChipRevMinor);
4032
4033 get_7220_chip_params(dd);
4034 qib_7220_boardname(dd);
4035
4036 /*
4037 * GPIO bits for TWSI data and clock,
4038 * used for serial EEPROM.
4039 */
4040 dd->gpio_sda_num = _QIB_GPIO_SDA_NUM;
4041 dd->gpio_scl_num = _QIB_GPIO_SCL_NUM;
4042 dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV;
4043
4044 dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY |
4045 QIB_NODMA_RTAIL | QIB_HAS_THRESH_UPDATE;
4046 dd->flags |= qib_special_trigger ?
4047 QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA;
4048
4049 /*
4050 * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
4051 * 2 is Some Misc, 3 is reserved for future.
4052 */
4053 dd->eep_st_masks[0].hwerrs_to_log = HWE_MASK(TXEMemParityErr);
4054
4055 dd->eep_st_masks[1].hwerrs_to_log = HWE_MASK(RXEMemParityErr);
4056
4057 dd->eep_st_masks[2].errs_to_log = ERR_MASK(ResetNegated);
4058
4059 init_waitqueue_head(&cpspec->autoneg_wait);
4060 INIT_DELAYED_WORK(&cpspec->autoneg_work, autoneg_7220_work);
4061
Mike Marciniszyn7d7632a2014-03-07 08:40:55 -05004062 ret = qib_init_pportdata(ppd, dd, 0, 1);
4063 if (ret)
4064 goto bail;
Ralph Campbellf9315512010-05-23 21:44:54 -07004065 ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
4066 ppd->link_speed_supported = QIB_IB_SDR | QIB_IB_DDR;
4067
4068 ppd->link_width_enabled = ppd->link_width_supported;
4069 ppd->link_speed_enabled = ppd->link_speed_supported;
4070 /*
4071 * Set the initial values to reasonable default, will be set
4072 * for real when link is up.
4073 */
4074 ppd->link_width_active = IB_WIDTH_4X;
4075 ppd->link_speed_active = QIB_IB_SDR;
4076 ppd->delay_mult = rate_to_delay[0][1];
4077 ppd->vls_supported = IB_VL_VL0;
4078 ppd->vls_operational = ppd->vls_supported;
4079
4080 if (!qib_mini_init)
4081 qib_write_kreg(dd, kr_rcvbthqp, QIB_KD_QP);
4082
4083 init_timer(&ppd->cpspec->chase_timer);
4084 ppd->cpspec->chase_timer.function = reenable_7220_chase;
4085 ppd->cpspec->chase_timer.data = (unsigned long)ppd;
4086
4087 qib_num_cfg_vls = 1; /* if any 7220's, only one VL */
4088
4089 dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE;
4090 dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE;
4091 dd->rhf_offset =
4092 dd->rcvhdrentsize - sizeof(u64) / sizeof(u32);
4093
4094 /* we always allocate at least 2048 bytes for eager buffers */
4095 ret = ib_mtu_enum_to_int(qib_ibmtu);
4096 dd->rcvegrbufsize = ret != -1 ? max(ret, 2048) : QIB_DEFAULT_MTU;
Mike Marciniszyn9e1c0e42011-09-23 13:16:39 -04004097 BUG_ON(!is_power_of_2(dd->rcvegrbufsize));
4098 dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize);
Ralph Campbellf9315512010-05-23 21:44:54 -07004099
4100 qib_7220_tidtemplate(dd);
4101
4102 /*
4103 * We can request a receive interrupt for 1 or
4104 * more packets from current offset. For now, we set this
4105 * up for a single packet.
4106 */
4107 dd->rhdrhead_intr_off = 1ULL << 32;
4108
4109 /* setup the stats timer; the add_timer is done at end of init */
4110 init_timer(&dd->stats_timer);
4111 dd->stats_timer.function = qib_get_7220_faststats;
4112 dd->stats_timer.data = (unsigned long) dd;
4113 dd->stats_timer.expires = jiffies + ACTIVITY_TIMER * HZ;
4114
4115 /*
4116 * Control[4] has been added to change the arbitration within
4117 * the SDMA engine between favoring data fetches over descriptor
4118 * fetches. qib_sdma_fetch_arb==0 gives data fetches priority.
4119 */
4120 if (qib_sdma_fetch_arb)
4121 dd->control |= 1 << 4;
4122
4123 dd->ureg_align = 0x10000; /* 64KB alignment */
4124
4125 dd->piosize2kmax_dwords = (dd->piosize2k >> 2)-1;
4126 qib_7220_config_ctxts(dd);
4127 qib_set_ctxtcnt(dd); /* needed for PAT setup */
4128
Luis R. Rodriguezd4988622015-04-22 11:38:24 -07004129 ret = init_chip_wc_pat(dd, 0);
4130 if (ret)
4131 goto bail;
Ralph Campbellf9315512010-05-23 21:44:54 -07004132 set_7220_baseaddrs(dd); /* set chip access pointers now */
4133
4134 ret = 0;
4135 if (qib_mini_init)
4136 goto bail;
4137
4138 ret = qib_create_ctxts(dd);
4139 init_7220_cntrnames(dd);
4140
4141 /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA.
4142 * reserve the update threshold amount for other kernel use, such
4143 * as sending SMI, MAD, and ACKs, or 3, whichever is greater,
4144 * unless we aren't enabling SDMA, in which case we want to use
4145 * all the 4k bufs for the kernel.
4146 * if this was less than the update threshold, we could wait
4147 * a long time for an update. Coded this way because we
4148 * sometimes change the update threshold for various reasons,
4149 * and we want this to remain robust.
4150 */
4151 updthresh = 8U; /* update threshold */
4152 if (dd->flags & QIB_HAS_SEND_DMA) {
4153 dd->cspec->sdmabufcnt = dd->piobcnt4k;
4154 sbufs = updthresh > 3 ? updthresh : 3;
4155 } else {
4156 dd->cspec->sdmabufcnt = 0;
4157 sbufs = dd->piobcnt4k;
4158 }
4159
4160 dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k -
4161 dd->cspec->sdmabufcnt;
4162 dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs;
4163 dd->cspec->lastbuf_for_pio--; /* range is <= , not < */
Mike Marciniszynbb77a072012-05-07 14:02:42 -04004164 dd->last_pio = dd->cspec->lastbuf_for_pio;
Ralph Campbellf9315512010-05-23 21:44:54 -07004165 dd->pbufsctxt = dd->lastctxt_piobuf /
4166 (dd->cfgctxts - dd->first_user_ctxt);
4167
4168 /*
4169 * if we are at 16 user contexts, we will have one 7 sbufs
4170 * per context, so drop the update threshold to match. We
4171 * want to update before we actually run out, at low pbufs/ctxt
4172 * so give ourselves some margin
4173 */
4174 if ((dd->pbufsctxt - 2) < updthresh)
4175 updthresh = dd->pbufsctxt - 2;
4176
4177 dd->cspec->updthresh_dflt = updthresh;
4178 dd->cspec->updthresh = updthresh;
4179
4180 /* before full enable, no interrupts, no locking needed */
4181 dd->sendctrl |= (updthresh & SYM_RMASK(SendCtrl, AvailUpdThld))
4182 << SYM_LSB(SendCtrl, AvailUpdThld);
4183
4184 dd->psxmitwait_supported = 1;
4185 dd->psxmitwait_check_rate = QIB_7220_PSXMITWAIT_CHECK_RATE;
4186bail:
4187 return ret;
4188}
4189
4190static u32 __iomem *qib_7220_getsendbuf(struct qib_pportdata *ppd, u64 pbc,
4191 u32 *pbufnum)
4192{
4193 u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK;
4194 struct qib_devdata *dd = ppd->dd;
4195 u32 __iomem *buf;
4196
4197 if (((pbc >> 32) & PBC_7220_VL15_SEND_CTRL) &&
4198 !(ppd->lflags & (QIBL_IB_AUTONEG_INPROG | QIBL_LINKACTIVE)))
4199 buf = get_7220_link_buf(ppd, pbufnum);
4200 else {
4201 if ((plen + 1) > dd->piosize2kmax_dwords)
4202 first = dd->piobcnt2k;
4203 else
4204 first = 0;
4205 /* try 4k if all 2k busy, so same last for both sizes */
4206 last = dd->cspec->lastbuf_for_pio;
4207 buf = qib_getsendbuf_range(dd, pbufnum, first, last);
4208 }
4209 return buf;
4210}
4211
4212/* these 2 "counters" are really control registers, and are always RW */
4213static void qib_set_cntr_7220_sample(struct qib_pportdata *ppd, u32 intv,
4214 u32 start)
4215{
4216 write_7220_creg(ppd->dd, cr_psinterval, intv);
4217 write_7220_creg(ppd->dd, cr_psstart, start);
4218}
4219
4220/*
4221 * NOTE: no real attempt is made to generalize the SDMA stuff.
4222 * At some point "soon" we will have a new more generalized
4223 * set of sdma interface, and then we'll clean this up.
4224 */
4225
4226/* Must be called with sdma_lock held, or before init finished */
4227static void qib_sdma_update_7220_tail(struct qib_pportdata *ppd, u16 tail)
4228{
4229 /* Commit writes to memory and advance the tail on the chip */
4230 wmb();
4231 ppd->sdma_descq_tail = tail;
4232 qib_write_kreg(ppd->dd, kr_senddmatail, tail);
4233}
4234
4235static void qib_sdma_set_7220_desc_cnt(struct qib_pportdata *ppd, unsigned cnt)
4236{
4237}
4238
4239static struct sdma_set_state_action sdma_7220_action_table[] = {
4240 [qib_sdma_state_s00_hw_down] = {
4241 .op_enable = 0,
4242 .op_intenable = 0,
4243 .op_halt = 0,
4244 .go_s99_running_tofalse = 1,
4245 },
4246 [qib_sdma_state_s10_hw_start_up_wait] = {
4247 .op_enable = 1,
4248 .op_intenable = 1,
4249 .op_halt = 1,
4250 },
4251 [qib_sdma_state_s20_idle] = {
4252 .op_enable = 1,
4253 .op_intenable = 1,
4254 .op_halt = 1,
4255 },
4256 [qib_sdma_state_s30_sw_clean_up_wait] = {
4257 .op_enable = 0,
4258 .op_intenable = 1,
4259 .op_halt = 0,
4260 },
4261 [qib_sdma_state_s40_hw_clean_up_wait] = {
4262 .op_enable = 1,
4263 .op_intenable = 1,
4264 .op_halt = 1,
4265 },
4266 [qib_sdma_state_s50_hw_halt_wait] = {
4267 .op_enable = 1,
4268 .op_intenable = 1,
4269 .op_halt = 1,
4270 },
4271 [qib_sdma_state_s99_running] = {
4272 .op_enable = 1,
4273 .op_intenable = 1,
4274 .op_halt = 0,
4275 .go_s99_running_totrue = 1,
4276 },
4277};
4278
4279static void qib_7220_sdma_init_early(struct qib_pportdata *ppd)
4280{
4281 ppd->sdma_state.set_state_action = sdma_7220_action_table;
4282}
4283
4284static int init_sdma_7220_regs(struct qib_pportdata *ppd)
4285{
4286 struct qib_devdata *dd = ppd->dd;
4287 unsigned i, n;
4288 u64 senddmabufmask[3] = { 0 };
4289
4290 /* Set SendDmaBase */
4291 qib_write_kreg(dd, kr_senddmabase, ppd->sdma_descq_phys);
4292 qib_sdma_7220_setlengen(ppd);
4293 qib_sdma_update_7220_tail(ppd, 0); /* Set SendDmaTail */
4294 /* Set SendDmaHeadAddr */
4295 qib_write_kreg(dd, kr_senddmaheadaddr, ppd->sdma_head_phys);
4296
4297 /*
4298 * Reserve all the former "kernel" piobufs, using high number range
4299 * so we get as many 4K buffers as possible
4300 */
4301 n = dd->piobcnt2k + dd->piobcnt4k;
4302 i = n - dd->cspec->sdmabufcnt;
4303
4304 for (; i < n; ++i) {
4305 unsigned word = i / 64;
4306 unsigned bit = i & 63;
4307
4308 BUG_ON(word >= 3);
4309 senddmabufmask[word] |= 1ULL << bit;
4310 }
4311 qib_write_kreg(dd, kr_senddmabufmask0, senddmabufmask[0]);
4312 qib_write_kreg(dd, kr_senddmabufmask1, senddmabufmask[1]);
4313 qib_write_kreg(dd, kr_senddmabufmask2, senddmabufmask[2]);
4314
4315 ppd->sdma_state.first_sendbuf = i;
4316 ppd->sdma_state.last_sendbuf = n;
4317
4318 return 0;
4319}
4320
4321/* sdma_lock must be held */
4322static u16 qib_sdma_7220_gethead(struct qib_pportdata *ppd)
4323{
4324 struct qib_devdata *dd = ppd->dd;
4325 int sane;
4326 int use_dmahead;
4327 u16 swhead;
4328 u16 swtail;
4329 u16 cnt;
4330 u16 hwhead;
4331
4332 use_dmahead = __qib_sdma_running(ppd) &&
4333 (dd->flags & QIB_HAS_SDMA_TIMEOUT);
4334retry:
4335 hwhead = use_dmahead ?
4336 (u16)le64_to_cpu(*ppd->sdma_head_dma) :
4337 (u16)qib_read_kreg32(dd, kr_senddmahead);
4338
4339 swhead = ppd->sdma_descq_head;
4340 swtail = ppd->sdma_descq_tail;
4341 cnt = ppd->sdma_descq_cnt;
4342
4343 if (swhead < swtail) {
4344 /* not wrapped */
4345 sane = (hwhead >= swhead) & (hwhead <= swtail);
4346 } else if (swhead > swtail) {
4347 /* wrapped around */
4348 sane = ((hwhead >= swhead) && (hwhead < cnt)) ||
4349 (hwhead <= swtail);
4350 } else {
4351 /* empty */
4352 sane = (hwhead == swhead);
4353 }
4354
4355 if (unlikely(!sane)) {
4356 if (use_dmahead) {
4357 /* try one more time, directly from the register */
4358 use_dmahead = 0;
4359 goto retry;
4360 }
4361 /* assume no progress */
4362 hwhead = swhead;
4363 }
4364
4365 return hwhead;
4366}
4367
4368static int qib_sdma_7220_busy(struct qib_pportdata *ppd)
4369{
4370 u64 hwstatus = qib_read_kreg64(ppd->dd, kr_senddmastatus);
4371
4372 return (hwstatus & SYM_MASK(SendDmaStatus, ScoreBoardDrainInProg)) ||
4373 (hwstatus & SYM_MASK(SendDmaStatus, AbortInProg)) ||
4374 (hwstatus & SYM_MASK(SendDmaStatus, InternalSDmaEnable)) ||
4375 !(hwstatus & SYM_MASK(SendDmaStatus, ScbEmpty));
4376}
4377
4378/*
4379 * Compute the amount of delay before sending the next packet if the
4380 * port's send rate differs from the static rate set for the QP.
4381 * Since the delay affects this packet but the amount of the delay is
4382 * based on the length of the previous packet, use the last delay computed
4383 * and save the delay count for this packet to be used next time
4384 * we get here.
4385 */
4386static u32 qib_7220_setpbc_control(struct qib_pportdata *ppd, u32 plen,
4387 u8 srate, u8 vl)
4388{
4389 u8 snd_mult = ppd->delay_mult;
4390 u8 rcv_mult = ib_rate_to_delay[srate];
4391 u32 ret = ppd->cpspec->last_delay_mult;
4392
4393 ppd->cpspec->last_delay_mult = (rcv_mult > snd_mult) ?
4394 (plen * (rcv_mult - snd_mult) + 1) >> 1 : 0;
4395
4396 /* Indicate VL15, if necessary */
4397 if (vl == 15)
4398 ret |= PBC_7220_VL15_SEND_CTRL;
4399 return ret;
4400}
4401
4402static void qib_7220_initvl15_bufs(struct qib_devdata *dd)
4403{
4404}
4405
4406static void qib_7220_init_ctxt(struct qib_ctxtdata *rcd)
4407{
4408 if (!rcd->ctxt) {
4409 rcd->rcvegrcnt = IBA7220_KRCVEGRCNT;
4410 rcd->rcvegr_tid_base = 0;
4411 } else {
4412 rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt;
4413 rcd->rcvegr_tid_base = IBA7220_KRCVEGRCNT +
4414 (rcd->ctxt - 1) * rcd->rcvegrcnt;
4415 }
4416}
4417
4418static void qib_7220_txchk_change(struct qib_devdata *dd, u32 start,
4419 u32 len, u32 which, struct qib_ctxtdata *rcd)
4420{
4421 int i;
4422 unsigned long flags;
4423
4424 switch (which) {
4425 case TXCHK_CHG_TYPE_KERN:
4426 /* see if we need to raise avail update threshold */
4427 spin_lock_irqsave(&dd->uctxt_lock, flags);
4428 for (i = dd->first_user_ctxt;
4429 dd->cspec->updthresh != dd->cspec->updthresh_dflt
4430 && i < dd->cfgctxts; i++)
4431 if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt &&
4432 ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1)
4433 < dd->cspec->updthresh_dflt)
4434 break;
4435 spin_unlock_irqrestore(&dd->uctxt_lock, flags);
4436 if (i == dd->cfgctxts) {
4437 spin_lock_irqsave(&dd->sendctrl_lock, flags);
4438 dd->cspec->updthresh = dd->cspec->updthresh_dflt;
4439 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld);
4440 dd->sendctrl |= (dd->cspec->updthresh &
4441 SYM_RMASK(SendCtrl, AvailUpdThld)) <<
4442 SYM_LSB(SendCtrl, AvailUpdThld);
4443 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
4444 sendctrl_7220_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
4445 }
4446 break;
4447 case TXCHK_CHG_TYPE_USER:
4448 spin_lock_irqsave(&dd->sendctrl_lock, flags);
4449 if (rcd && rcd->subctxt_cnt && ((rcd->piocnt
4450 / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) {
4451 dd->cspec->updthresh = (rcd->piocnt /
4452 rcd->subctxt_cnt) - 1;
4453 dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld);
4454 dd->sendctrl |= (dd->cspec->updthresh &
4455 SYM_RMASK(SendCtrl, AvailUpdThld))
4456 << SYM_LSB(SendCtrl, AvailUpdThld);
4457 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
4458 sendctrl_7220_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
4459 } else
4460 spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
4461 break;
4462 }
4463}
4464
4465static void writescratch(struct qib_devdata *dd, u32 val)
4466{
4467 qib_write_kreg(dd, kr_scratch, val);
4468}
4469
4470#define VALID_TS_RD_REG_MASK 0xBF
4471/**
4472 * qib_7220_tempsense_read - read register of temp sensor via TWSI
4473 * @dd: the qlogic_ib device
4474 * @regnum: register to read from
4475 *
4476 * returns reg contents (0..255) or < 0 for error
4477 */
4478static int qib_7220_tempsense_rd(struct qib_devdata *dd, int regnum)
4479{
4480 int ret;
4481 u8 rdata;
4482
4483 if (regnum > 7) {
4484 ret = -EINVAL;
4485 goto bail;
4486 }
4487
4488 /* return a bogus value for (the one) register we do not have */
4489 if (!((1 << regnum) & VALID_TS_RD_REG_MASK)) {
4490 ret = 0;
4491 goto bail;
4492 }
4493
4494 ret = mutex_lock_interruptible(&dd->eep_lock);
4495 if (ret)
4496 goto bail;
4497
4498 ret = qib_twsi_blk_rd(dd, QIB_TWSI_TEMP_DEV, regnum, &rdata, 1);
4499 if (!ret)
4500 ret = rdata;
4501
4502 mutex_unlock(&dd->eep_lock);
4503
4504 /*
4505 * There are three possibilities here:
4506 * ret is actual value (0..255)
4507 * ret is -ENXIO or -EINVAL from twsi code or this file
4508 * ret is -EINTR from mutex_lock_interruptible.
4509 */
4510bail:
4511 return ret;
4512}
4513
Mike Marciniszyn8469ba32013-05-30 18:25:25 -04004514#ifdef CONFIG_INFINIBAND_QIB_DCA
4515static int qib_7220_notify_dca(struct qib_devdata *dd, unsigned long event)
4516{
4517 return 0;
4518}
4519#endif
4520
Ralph Campbellf9315512010-05-23 21:44:54 -07004521/* Dummy function, as 7220 boards never disable EEPROM Write */
4522static int qib_7220_eeprom_wen(struct qib_devdata *dd, int wen)
4523{
4524 return 1;
4525}
4526
4527/**
4528 * qib_init_iba7220_funcs - set up the chip-specific function pointers
4529 * @dev: the pci_dev for qlogic_ib device
4530 * @ent: pci_device_id struct for this dev
4531 *
4532 * This is global, and is called directly at init to set up the
4533 * chip-specific function pointers for later use.
4534 */
4535struct qib_devdata *qib_init_iba7220_funcs(struct pci_dev *pdev,
4536 const struct pci_device_id *ent)
4537{
4538 struct qib_devdata *dd;
4539 int ret;
4540 u32 boardid, minwidth;
4541
4542 dd = qib_alloc_devdata(pdev, sizeof(struct qib_chip_specific) +
4543 sizeof(struct qib_chippport_specific));
4544 if (IS_ERR(dd))
4545 goto bail;
4546
4547 dd->f_bringup_serdes = qib_7220_bringup_serdes;
4548 dd->f_cleanup = qib_setup_7220_cleanup;
4549 dd->f_clear_tids = qib_7220_clear_tids;
4550 dd->f_free_irq = qib_7220_free_irq;
4551 dd->f_get_base_info = qib_7220_get_base_info;
4552 dd->f_get_msgheader = qib_7220_get_msgheader;
4553 dd->f_getsendbuf = qib_7220_getsendbuf;
4554 dd->f_gpio_mod = gpio_7220_mod;
4555 dd->f_eeprom_wen = qib_7220_eeprom_wen;
4556 dd->f_hdrqempty = qib_7220_hdrqempty;
4557 dd->f_ib_updown = qib_7220_ib_updown;
4558 dd->f_init_ctxt = qib_7220_init_ctxt;
4559 dd->f_initvl15_bufs = qib_7220_initvl15_bufs;
4560 dd->f_intr_fallback = qib_7220_intr_fallback;
4561 dd->f_late_initreg = qib_late_7220_initreg;
4562 dd->f_setpbc_control = qib_7220_setpbc_control;
4563 dd->f_portcntr = qib_portcntr_7220;
4564 dd->f_put_tid = qib_7220_put_tid;
4565 dd->f_quiet_serdes = qib_7220_quiet_serdes;
4566 dd->f_rcvctrl = rcvctrl_7220_mod;
4567 dd->f_read_cntrs = qib_read_7220cntrs;
4568 dd->f_read_portcntrs = qib_read_7220portcntrs;
4569 dd->f_reset = qib_setup_7220_reset;
4570 dd->f_init_sdma_regs = init_sdma_7220_regs;
4571 dd->f_sdma_busy = qib_sdma_7220_busy;
4572 dd->f_sdma_gethead = qib_sdma_7220_gethead;
4573 dd->f_sdma_sendctrl = qib_7220_sdma_sendctrl;
4574 dd->f_sdma_set_desc_cnt = qib_sdma_set_7220_desc_cnt;
4575 dd->f_sdma_update_tail = qib_sdma_update_7220_tail;
4576 dd->f_sdma_hw_clean_up = qib_7220_sdma_hw_clean_up;
4577 dd->f_sdma_hw_start_up = qib_7220_sdma_hw_start_up;
4578 dd->f_sdma_init_early = qib_7220_sdma_init_early;
4579 dd->f_sendctrl = sendctrl_7220_mod;
4580 dd->f_set_armlaunch = qib_set_7220_armlaunch;
4581 dd->f_set_cntr_sample = qib_set_cntr_7220_sample;
4582 dd->f_iblink_state = qib_7220_iblink_state;
4583 dd->f_ibphys_portstate = qib_7220_phys_portstate;
4584 dd->f_get_ib_cfg = qib_7220_get_ib_cfg;
4585 dd->f_set_ib_cfg = qib_7220_set_ib_cfg;
4586 dd->f_set_ib_loopback = qib_7220_set_loopback;
4587 dd->f_set_intr_state = qib_7220_set_intr_state;
4588 dd->f_setextled = qib_setup_7220_setextled;
4589 dd->f_txchk_change = qib_7220_txchk_change;
4590 dd->f_update_usrhead = qib_update_7220_usrhead;
4591 dd->f_wantpiobuf_intr = qib_wantpiobuf_7220_intr;
4592 dd->f_xgxs_reset = qib_7220_xgxs_reset;
4593 dd->f_writescratch = writescratch;
4594 dd->f_tempsense_rd = qib_7220_tempsense_rd;
Mike Marciniszyn8469ba32013-05-30 18:25:25 -04004595#ifdef CONFIG_INFINIBAND_QIB_DCA
4596 dd->f_notify_dca = qib_7220_notify_dca;
4597#endif
Ralph Campbellf9315512010-05-23 21:44:54 -07004598 /*
4599 * Do remaining pcie setup and save pcie values in dd.
4600 * Any error printing is already done by the init code.
4601 * On return, we have the chip mapped, but chip registers
4602 * are not set up until start of qib_init_7220_variables.
4603 */
4604 ret = qib_pcie_ddinit(dd, pdev, ent);
4605 if (ret < 0)
4606 goto bail_free;
4607
4608 /* initialize chip-specific variables */
4609 ret = qib_init_7220_variables(dd);
4610 if (ret)
4611 goto bail_cleanup;
4612
4613 if (qib_mini_init)
4614 goto bail;
4615
4616 boardid = SYM_FIELD(dd->revision, Revision,
4617 BoardID);
4618 switch (boardid) {
4619 case 0:
4620 case 2:
4621 case 10:
4622 case 12:
4623 minwidth = 16; /* x16 capable boards */
4624 break;
4625 default:
4626 minwidth = 8; /* x8 capable boards */
4627 break;
4628 }
4629 if (qib_pcie_params(dd, minwidth, NULL, NULL))
Mike Marciniszyn7fac3302012-07-19 13:04:25 +00004630 qib_dev_err(dd,
4631 "Failed to setup PCIe or interrupts; continuing anyway\n");
Ralph Campbellf9315512010-05-23 21:44:54 -07004632
4633 /* save IRQ for possible later use */
4634 dd->cspec->irq = pdev->irq;
4635
4636 if (qib_read_kreg64(dd, kr_hwerrstatus) &
4637 QLOGIC_IB_HWE_SERDESPLLFAILED)
4638 qib_write_kreg(dd, kr_hwerrclear,
4639 QLOGIC_IB_HWE_SERDESPLLFAILED);
4640
4641 /* setup interrupt handler (interrupt type handled above) */
4642 qib_setup_7220_interrupt(dd);
4643 qib_7220_init_hwerrors(dd);
4644
4645 /* clear diagctrl register, in case diags were running and crashed */
4646 qib_write_kreg(dd, kr_hwdiagctrl, 0);
4647
4648 goto bail;
4649
4650bail_cleanup:
4651 qib_pcie_ddcleanup(dd);
4652bail_free:
4653 qib_free_devdata(dd);
4654 dd = ERR_PTR(ret);
4655bail:
4656 return dd;
4657}