Enrico Mioso | 41c47d8 | 2013-11-04 09:50:48 +0100 | [diff] [blame^] | 1 | /* huawei_cdc_ncm.c - handles Huawei devices using the CDC NCM protocol as |
| 2 | * transport layer. |
| 3 | * Copyright (C) 2013 Enrico Mioso <mrkiko.rs@gmail.com> |
| 4 | * |
| 5 | * |
| 6 | * ABSTRACT: |
| 7 | * This driver handles devices resembling the CDC NCM standard, but |
| 8 | * encapsulating another protocol inside it. An example are some Huawei 3G |
| 9 | * devices, exposing an embedded AT channel where you can set up the NCM |
| 10 | * connection. |
| 11 | * This code has been heavily inspired by the cdc_mbim.c driver, which is |
| 12 | * Copyright (c) 2012 Smith Micro Software, Inc. |
| 13 | * Copyright (c) 2012 Bjørn Mork <bjorn@mork.no> |
| 14 | * |
| 15 | * This program is free software; you can redistribute it and/or |
| 16 | * modify it under the terms of the GNU General Public License |
| 17 | * version 2 as published by the Free Software Foundation. |
| 18 | */ |
| 19 | |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/netdevice.h> |
| 22 | #include <linux/ethtool.h> |
| 23 | #include <linux/if_vlan.h> |
| 24 | #include <linux/ip.h> |
| 25 | #include <linux/mii.h> |
| 26 | #include <linux/usb.h> |
| 27 | #include <linux/usb/cdc.h> |
| 28 | #include <linux/usb/usbnet.h> |
| 29 | #include <linux/usb/cdc-wdm.h> |
| 30 | #include <linux/usb/cdc_ncm.h> |
| 31 | |
| 32 | /* Driver data */ |
| 33 | struct huawei_cdc_ncm_state { |
| 34 | struct cdc_ncm_ctx *ctx; |
| 35 | atomic_t pmcount; |
| 36 | struct usb_driver *subdriver; |
| 37 | struct usb_interface *control; |
| 38 | struct usb_interface *data; |
| 39 | }; |
| 40 | |
| 41 | static int huawei_cdc_ncm_manage_power(struct usbnet *usbnet_dev, int on) |
| 42 | { |
| 43 | struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data; |
| 44 | int rv; |
| 45 | |
| 46 | if ((on && atomic_add_return(1, &drvstate->pmcount) == 1) || |
| 47 | (!on && atomic_dec_and_test(&drvstate->pmcount))) { |
| 48 | rv = usb_autopm_get_interface(usbnet_dev->intf); |
| 49 | usbnet_dev->intf->needs_remote_wakeup = on; |
| 50 | if (!rv) |
| 51 | usb_autopm_put_interface(usbnet_dev->intf); |
| 52 | } |
| 53 | return 0; |
| 54 | } |
| 55 | |
| 56 | static int huawei_cdc_ncm_wdm_manage_power(struct usb_interface *intf, |
| 57 | int status) |
| 58 | { |
| 59 | struct usbnet *usbnet_dev = usb_get_intfdata(intf); |
| 60 | |
| 61 | /* can be called while disconnecting */ |
| 62 | if (!usbnet_dev) |
| 63 | return 0; |
| 64 | |
| 65 | return huawei_cdc_ncm_manage_power(usbnet_dev, status); |
| 66 | } |
| 67 | |
| 68 | |
| 69 | static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev, |
| 70 | struct usb_interface *intf) |
| 71 | { |
| 72 | struct cdc_ncm_ctx *ctx; |
| 73 | struct usb_driver *subdriver = ERR_PTR(-ENODEV); |
| 74 | int ret = -ENODEV; |
| 75 | struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data; |
| 76 | |
| 77 | /* altsetting should always be 1 for NCM devices - so we hard-coded |
| 78 | * it here |
| 79 | */ |
| 80 | ret = cdc_ncm_bind_common(usbnet_dev, intf, 1); |
| 81 | if (ret) |
| 82 | goto err; |
| 83 | |
| 84 | ctx = drvstate->ctx; |
| 85 | |
| 86 | if (usbnet_dev->status) |
| 87 | /* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 |
| 88 | * decimal (0x100)" |
| 89 | */ |
| 90 | subdriver = usb_cdc_wdm_register(ctx->control, |
| 91 | &usbnet_dev->status->desc, |
| 92 | 256, /* wMaxCommand */ |
| 93 | huawei_cdc_ncm_wdm_manage_power); |
| 94 | if (IS_ERR(subdriver)) { |
| 95 | ret = PTR_ERR(subdriver); |
| 96 | cdc_ncm_unbind(usbnet_dev, intf); |
| 97 | goto err; |
| 98 | } |
| 99 | |
| 100 | /* Prevent usbnet from using the status descriptor */ |
| 101 | usbnet_dev->status = NULL; |
| 102 | |
| 103 | drvstate->subdriver = subdriver; |
| 104 | |
| 105 | err: |
| 106 | return ret; |
| 107 | } |
| 108 | |
| 109 | static void huawei_cdc_ncm_unbind(struct usbnet *usbnet_dev, |
| 110 | struct usb_interface *intf) |
| 111 | { |
| 112 | struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data; |
| 113 | struct cdc_ncm_ctx *ctx = drvstate->ctx; |
| 114 | |
| 115 | if (drvstate->subdriver && drvstate->subdriver->disconnect) |
| 116 | drvstate->subdriver->disconnect(ctx->control); |
| 117 | drvstate->subdriver = NULL; |
| 118 | |
| 119 | cdc_ncm_unbind(usbnet_dev, intf); |
| 120 | } |
| 121 | |
| 122 | static int huawei_cdc_ncm_suspend(struct usb_interface *intf, |
| 123 | pm_message_t message) |
| 124 | { |
| 125 | int ret = 0; |
| 126 | struct usbnet *usbnet_dev = usb_get_intfdata(intf); |
| 127 | struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data; |
| 128 | struct cdc_ncm_ctx *ctx = drvstate->ctx; |
| 129 | |
| 130 | if (ctx == NULL) { |
| 131 | ret = -ENODEV; |
| 132 | goto error; |
| 133 | } |
| 134 | |
| 135 | ret = usbnet_suspend(intf, message); |
| 136 | if (ret < 0) |
| 137 | goto error; |
| 138 | |
| 139 | if (intf == ctx->control && |
| 140 | drvstate->subdriver && |
| 141 | drvstate->subdriver->suspend) |
| 142 | ret = drvstate->subdriver->suspend(intf, message); |
| 143 | if (ret < 0) |
| 144 | usbnet_resume(intf); |
| 145 | |
| 146 | error: |
| 147 | return ret; |
| 148 | } |
| 149 | |
| 150 | static int huawei_cdc_ncm_resume(struct usb_interface *intf) |
| 151 | { |
| 152 | int ret = 0; |
| 153 | struct usbnet *usbnet_dev = usb_get_intfdata(intf); |
| 154 | struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data; |
| 155 | bool callsub; |
| 156 | struct cdc_ncm_ctx *ctx = drvstate->ctx; |
| 157 | |
| 158 | /* should we call subdriver's resume function? */ |
| 159 | callsub = |
| 160 | (intf == ctx->control && |
| 161 | drvstate->subdriver && |
| 162 | drvstate->subdriver->resume); |
| 163 | |
| 164 | if (callsub) |
| 165 | ret = drvstate->subdriver->resume(intf); |
| 166 | if (ret < 0) |
| 167 | goto err; |
| 168 | ret = usbnet_resume(intf); |
| 169 | if (ret < 0 && callsub) |
| 170 | drvstate->subdriver->suspend(intf, PMSG_SUSPEND); |
| 171 | err: |
| 172 | return ret; |
| 173 | } |
| 174 | |
| 175 | static int huawei_cdc_ncm_check_connect(struct usbnet *usbnet_dev) |
| 176 | { |
| 177 | struct cdc_ncm_ctx *ctx; |
| 178 | |
| 179 | ctx = (struct cdc_ncm_ctx *)usbnet_dev->data[0]; |
| 180 | |
| 181 | if (ctx == NULL) |
| 182 | return 1; /* disconnected */ |
| 183 | |
| 184 | return !ctx->connected; |
| 185 | } |
| 186 | |
| 187 | static const struct driver_info huawei_cdc_ncm_info = { |
| 188 | .description = "Huawei CDC NCM device", |
| 189 | .flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN, |
| 190 | .bind = huawei_cdc_ncm_bind, |
| 191 | .unbind = huawei_cdc_ncm_unbind, |
| 192 | .check_connect = huawei_cdc_ncm_check_connect, |
| 193 | .manage_power = huawei_cdc_ncm_manage_power, |
| 194 | .rx_fixup = cdc_ncm_rx_fixup, |
| 195 | .tx_fixup = cdc_ncm_tx_fixup, |
| 196 | }; |
| 197 | |
| 198 | static const struct usb_device_id huawei_cdc_ncm_devs[] = { |
| 199 | /* Huawei NCM devices disguised as vendor specific */ |
| 200 | { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16), |
| 201 | .driver_info = (unsigned long)&huawei_cdc_ncm_info, |
| 202 | }, |
| 203 | { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46), |
| 204 | .driver_info = (unsigned long)&huawei_cdc_ncm_info, |
| 205 | }, |
| 206 | { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x76), |
| 207 | .driver_info = (unsigned long)&huawei_cdc_ncm_info, |
| 208 | }, |
| 209 | |
| 210 | /* Terminating entry */ |
| 211 | { |
| 212 | }, |
| 213 | }; |
| 214 | MODULE_DEVICE_TABLE(usb, huawei_cdc_ncm_devs); |
| 215 | |
| 216 | static struct usb_driver huawei_cdc_ncm_driver = { |
| 217 | .name = "huawei_cdc_ncm", |
| 218 | .id_table = huawei_cdc_ncm_devs, |
| 219 | .probe = usbnet_probe, |
| 220 | .disconnect = usbnet_disconnect, |
| 221 | .suspend = huawei_cdc_ncm_suspend, |
| 222 | .resume = huawei_cdc_ncm_resume, |
| 223 | .reset_resume = huawei_cdc_ncm_resume, |
| 224 | .supports_autosuspend = 1, |
| 225 | .disable_hub_initiated_lpm = 1, |
| 226 | }; |
| 227 | module_usb_driver(huawei_cdc_ncm_driver); |
| 228 | MODULE_AUTHOR("Enrico Mioso <mrkiko.rs@gmail.com>"); |
| 229 | MODULE_DESCRIPTION("USB CDC NCM host driver with encapsulated protocol support"); |
| 230 | MODULE_LICENSE("GPL"); |