blob: 32bf419351f184242dfd5af400dd1859f297282d [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * INET An implementation of the TCP/IP protocol suite for the LINUX
3 * operating system. INET is implemented using the BSD Socket
4 * interface as the means of communication with the user level.
5 *
6 * Global definitions for the INET interface module.
7 *
8 * Version: @(#)if.h 1.0.2 04/18/93
9 *
10 * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
Jesper Juhl02c30a82005-05-05 16:16:16 -070011 * Ross Biro
Linus Torvalds1da177e2005-04-16 15:20:36 -070012 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License
16 * as published by the Free Software Foundation; either version
17 * 2 of the License, or (at your option) any later version.
18 */
19#ifndef _LINUX_IF_H
20#define _LINUX_IF_H
21
22#include <linux/types.h> /* for "__kernel_caddr_t" et al */
23#include <linux/socket.h> /* for "struct sockaddr" et al */
24#include <linux/compiler.h> /* for "__user" et al */
25
26#define IFNAMSIZ 16
27#include <linux/hdlc/ioctl.h>
28
29/* Standard interface flags (netdevice->flags). */
30#define IFF_UP 0x1 /* interface is up */
31#define IFF_BROADCAST 0x2 /* broadcast address valid */
32#define IFF_DEBUG 0x4 /* turn on debugging */
33#define IFF_LOOPBACK 0x8 /* is a loopback net */
34#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */
35#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */
Stefan Rompfb00055a2006-03-20 17:09:11 -080036#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */
Linus Torvalds1da177e2005-04-16 15:20:36 -070037#define IFF_NOARP 0x80 /* no ARP protocol */
38#define IFF_PROMISC 0x100 /* receive all packets */
39#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/
40
41#define IFF_MASTER 0x400 /* master of a load balancer */
42#define IFF_SLAVE 0x800 /* slave of a load balancer */
43
44#define IFF_MULTICAST 0x1000 /* Supports multicast */
45
Linus Torvalds1da177e2005-04-16 15:20:36 -070046#define IFF_PORTSEL 0x2000 /* can set media type */
47#define IFF_AUTOMEDIA 0x4000 /* auto media select active */
48#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/
49
Stefan Rompfb00055a2006-03-20 17:09:11 -080050#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */
51#define IFF_DORMANT 0x20000 /* driver signals dormant */
52
53#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|\
54 IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
55
Linus Torvalds1da177e2005-04-16 15:20:36 -070056/* Private (from user) interface flags (netdevice->priv_flags). */
57#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */
58#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */
Jay Vosburgh8f903c72006-02-21 16:36:44 -080059#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */
60#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */
61#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */
Jay Vosburgh0b680e72006-09-22 21:54:10 -070062#define IFF_BONDING 0x20 /* bonding master or slave */
Jay Vosburghf5b2b962006-09-22 21:54:53 -070063#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
Linus Torvalds1da177e2005-04-16 15:20:36 -070064
65#define IF_GET_IFACE 0x0001 /* for querying only */
66#define IF_GET_PROTO 0x0002
67
68/* For definitions see hdlc.h */
69#define IF_IFACE_V35 0x1000 /* V.35 serial interface */
70#define IF_IFACE_V24 0x1001 /* V.24 serial interface */
71#define IF_IFACE_X21 0x1002 /* X.21 serial interface */
72#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */
73#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */
74#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */
75#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */
76
77/* For definitions see hdlc.h */
78#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */
79#define IF_PROTO_PPP 0x2001 /* PPP protocol */
80#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */
81#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */
82#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */
83#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */
84#define IF_PROTO_X25 0x2006 /* X.25 */
85#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */
86#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */
87#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */
88#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */
89#define IF_PROTO_FR_ETH_PVC 0x200B
90#define IF_PROTO_RAW 0x200C /* RAW Socket */
91
Stefan Rompfb00055a2006-03-20 17:09:11 -080092/* RFC 2863 operational status */
93enum {
94 IF_OPER_UNKNOWN,
95 IF_OPER_NOTPRESENT,
96 IF_OPER_DOWN,
97 IF_OPER_LOWERLAYERDOWN,
98 IF_OPER_TESTING,
99 IF_OPER_DORMANT,
100 IF_OPER_UP,
101};
102
103/* link modes */
104enum {
105 IF_LINK_MODE_DEFAULT,
106 IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */
107};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108
109/*
110 * Device mapping structure. I'd just gone off and designed a
111 * beautiful scheme using only loadable modules with arguments
112 * for driver options and along come the PCMCIA people 8)
113 *
114 * Ah well. The get() side of this is good for WDSETUP, and it'll
115 * be handy for debugging things. The set side is fine for now and
116 * being very small might be worth keeping for clean configuration.
117 */
118
119struct ifmap
120{
121 unsigned long mem_start;
122 unsigned long mem_end;
123 unsigned short base_addr;
124 unsigned char irq;
125 unsigned char dma;
126 unsigned char port;
127 /* 3 bytes spare */
128};
129
130struct if_settings
131{
132 unsigned int type; /* Type of physical device or protocol */
133 unsigned int size; /* Size of the data allocated by the caller */
134 union {
135 /* {atm/eth/dsl}_settings anyone ? */
136 raw_hdlc_proto __user *raw_hdlc;
137 cisco_proto __user *cisco;
138 fr_proto __user *fr;
139 fr_proto_pvc __user *fr_pvc;
140 fr_proto_pvc_info __user *fr_pvc_info;
141
142 /* interface settings */
143 sync_serial_settings __user *sync;
144 te1_settings __user *te1;
145 } ifs_ifsu;
146};
147
148/*
149 * Interface request structure used for socket
150 * ioctl's. All interface ioctl's must have parameter
151 * definitions which begin with ifr_name. The
152 * remainder may be interface specific.
153 */
154
155struct ifreq
156{
157#define IFHWADDRLEN 6
158 union
159 {
160 char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */
161 } ifr_ifrn;
162
163 union {
164 struct sockaddr ifru_addr;
165 struct sockaddr ifru_dstaddr;
166 struct sockaddr ifru_broadaddr;
167 struct sockaddr ifru_netmask;
168 struct sockaddr ifru_hwaddr;
169 short ifru_flags;
170 int ifru_ivalue;
171 int ifru_mtu;
172 struct ifmap ifru_map;
173 char ifru_slave[IFNAMSIZ]; /* Just fits the size */
174 char ifru_newname[IFNAMSIZ];
175 void __user * ifru_data;
176 struct if_settings ifru_settings;
177 } ifr_ifru;
178};
179
180#define ifr_name ifr_ifrn.ifrn_name /* interface name */
181#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
182#define ifr_addr ifr_ifru.ifru_addr /* address */
183#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */
184#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
185#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */
186#define ifr_flags ifr_ifru.ifru_flags /* flags */
187#define ifr_metric ifr_ifru.ifru_ivalue /* metric */
188#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */
189#define ifr_map ifr_ifru.ifru_map /* device map */
190#define ifr_slave ifr_ifru.ifru_slave /* slave device */
191#define ifr_data ifr_ifru.ifru_data /* for use by interface */
192#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */
193#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */
194#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */
195#define ifr_newname ifr_ifru.ifru_newname /* New name */
196#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/
197
198/*
199 * Structure used in SIOCGIFCONF request.
200 * Used to retrieve interface configuration
201 * for machine (useful for programs which
202 * must know all networks accessible).
203 */
204
205struct ifconf
206{
207 int ifc_len; /* size of buffer */
208 union
209 {
210 char __user *ifcu_buf;
211 struct ifreq __user *ifcu_req;
212 } ifc_ifcu;
213};
214#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
215#define ifc_req ifc_ifcu.ifcu_req /* array of structures */
216
Linus Torvalds1da177e2005-04-16 15:20:36 -0700217#endif /* _LINUX_IF_H */