Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 1 | /* |
| 2 | * Hardkernel Odroid XU3 board device tree source |
| 3 | * |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 4 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| 5 | * http://www.samsung.com |
Krzysztof Kozlowski | f4715dc | 2016-05-09 08:19:49 +0200 | [diff] [blame] | 6 | * Copyright (c) 2014 Collabora Ltd. |
| 7 | * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com> |
| 8 | * Anand Moon <linux.amoon@gmail.com> |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License version 2 as |
| 12 | * published by the Free Software Foundation. |
| 13 | */ |
| 14 | |
| 15 | #include <dt-bindings/clock/samsung,s2mps11.h> |
| 16 | #include <dt-bindings/interrupt-controller/irq.h> |
| 17 | #include <dt-bindings/gpio/gpio.h> |
| 18 | #include <dt-bindings/sound/samsung-i2s.h> |
| 19 | #include "exynos5800.dtsi" |
Chanho Park | df09df6f | 2015-07-30 23:11:00 +0900 | [diff] [blame] | 20 | #include "exynos5422-cpus.dtsi" |
Marek Szyprowski | 8b9ac7e | 2016-05-24 15:31:29 +0200 | [diff] [blame] | 21 | #include "exynos-mfc-reserved-memory.dtsi" |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 22 | |
| 23 | / { |
| 24 | memory { |
| 25 | reg = <0x40000000 0x7EA00000>; |
| 26 | }; |
| 27 | |
| 28 | chosen { |
| 29 | linux,stdout-path = &serial_2; |
| 30 | }; |
| 31 | |
| 32 | firmware@02073000 { |
| 33 | compatible = "samsung,secure-firmware"; |
| 34 | reg = <0x02073000 0x1000>; |
| 35 | }; |
| 36 | |
| 37 | fixed-rate-clocks { |
| 38 | oscclk { |
| 39 | compatible = "samsung,exynos5420-oscclk"; |
| 40 | clock-frequency = <24000000>; |
| 41 | }; |
| 42 | }; |
| 43 | |
| 44 | emmc_pwrseq: pwrseq { |
| 45 | pinctrl-0 = <&emmc_nrst_pin>; |
| 46 | pinctrl-names = "default"; |
| 47 | compatible = "mmc-pwrseq-emmc"; |
Javier Martinez Canillas | 31b9903 | 2015-10-08 07:39:58 +0900 | [diff] [blame] | 48 | reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 49 | }; |
| 50 | |
Anand Moon | b685d54 | 2015-06-15 12:23:20 +0930 | [diff] [blame] | 51 | fan0: pwm-fan { |
| 52 | compatible = "pwm-fan"; |
| 53 | pwms = <&pwm 0 20972 0>; |
| 54 | cooling-min-state = <0>; |
| 55 | cooling-max-state = <3>; |
| 56 | #cooling-cells = <2>; |
| 57 | cooling-levels = <0 130 170 230>; |
| 58 | }; |
Krzysztof Kozlowski | f4715dc | 2016-05-09 08:19:49 +0200 | [diff] [blame] | 59 | |
| 60 | thermal-zones { |
| 61 | cpu0_thermal: cpu0-thermal { |
| 62 | thermal-sensors = <&tmu_cpu0 0>; |
| 63 | polling-delay-passive = <250>; |
| 64 | polling-delay = <0>; |
| 65 | trips { |
| 66 | cpu_alert0: cpu-alert-0 { |
| 67 | temperature = <50000>; /* millicelsius */ |
| 68 | hysteresis = <5000>; /* millicelsius */ |
| 69 | type = "active"; |
| 70 | }; |
| 71 | cpu_alert1: cpu-alert-1 { |
| 72 | temperature = <60000>; /* millicelsius */ |
| 73 | hysteresis = <5000>; /* millicelsius */ |
| 74 | type = "active"; |
| 75 | }; |
| 76 | cpu_alert2: cpu-alert-2 { |
| 77 | temperature = <70000>; /* millicelsius */ |
| 78 | hysteresis = <5000>; /* millicelsius */ |
| 79 | type = "active"; |
| 80 | }; |
| 81 | cpu_crit0: cpu-crit-0 { |
| 82 | temperature = <120000>; /* millicelsius */ |
| 83 | hysteresis = <0>; /* millicelsius */ |
| 84 | type = "critical"; |
| 85 | }; |
| 86 | /* |
| 87 | * Exynos542x supports only 4 trip-points |
| 88 | * so for these polling mode is required. |
| 89 | * Start polling at temperature level of last |
| 90 | * interrupt-driven trip: cpu_alert2 |
| 91 | */ |
| 92 | cpu_alert3: cpu-alert-3 { |
| 93 | temperature = <70000>; /* millicelsius */ |
| 94 | hysteresis = <10000>; /* millicelsius */ |
| 95 | type = "passive"; |
| 96 | }; |
| 97 | cpu_alert4: cpu-alert-4 { |
| 98 | temperature = <85000>; /* millicelsius */ |
| 99 | hysteresis = <10000>; /* millicelsius */ |
| 100 | type = "passive"; |
| 101 | }; |
| 102 | |
| 103 | }; |
| 104 | cooling-maps { |
| 105 | map0 { |
| 106 | trip = <&cpu_alert0>; |
| 107 | cooling-device = <&fan0 0 1>; |
| 108 | }; |
| 109 | map1 { |
| 110 | trip = <&cpu_alert1>; |
| 111 | cooling-device = <&fan0 1 2>; |
| 112 | }; |
| 113 | map2 { |
| 114 | trip = <&cpu_alert2>; |
| 115 | cooling-device = <&fan0 2 3>; |
| 116 | }; |
| 117 | /* |
| 118 | * When reaching cpu_alert3, reduce CPU |
| 119 | * by 2 steps. On Exynos5422/5800 that would |
| 120 | * be: 1600 MHz and 1100 MHz. |
| 121 | */ |
| 122 | map3 { |
| 123 | trip = <&cpu_alert3>; |
| 124 | cooling-device = <&cpu0 0 2>; |
| 125 | }; |
| 126 | map4 { |
| 127 | trip = <&cpu_alert3>; |
| 128 | cooling-device = <&cpu4 0 2>; |
| 129 | }; |
| 130 | |
| 131 | /* |
| 132 | * When reaching cpu_alert4, reduce CPU |
| 133 | * further, down to 600 MHz (11 steps for big, |
| 134 | * 7 steps for LITTLE). |
| 135 | */ |
| 136 | map5 { |
| 137 | trip = <&cpu_alert4>; |
| 138 | cooling-device = <&cpu0 3 7>; |
| 139 | }; |
| 140 | map6 { |
| 141 | trip = <&cpu_alert4>; |
| 142 | cooling-device = <&cpu4 3 11>; |
| 143 | }; |
| 144 | }; |
| 145 | }; |
| 146 | }; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 147 | }; |
| 148 | |
Chanwoo Choi | 3f2129f | 2016-04-15 15:32:55 +0900 | [diff] [blame] | 149 | &bus_wcore { |
| 150 | devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, |
| 151 | <&nocp_mem1_0>, <&nocp_mem1_1>; |
| 152 | vdd-supply = <&buck3_reg>; |
| 153 | exynos,saturation-ratio = <100>; |
| 154 | status = "okay"; |
| 155 | }; |
| 156 | |
| 157 | &bus_noc { |
| 158 | devfreq = <&bus_wcore>; |
| 159 | status = "okay"; |
| 160 | }; |
| 161 | |
| 162 | &bus_fsys_apb { |
| 163 | devfreq = <&bus_wcore>; |
| 164 | status = "okay"; |
| 165 | }; |
| 166 | |
| 167 | &bus_fsys { |
| 168 | devfreq = <&bus_wcore>; |
| 169 | status = "okay"; |
| 170 | }; |
| 171 | |
| 172 | &bus_fsys2 { |
| 173 | devfreq = <&bus_wcore>; |
| 174 | status = "okay"; |
| 175 | }; |
| 176 | |
| 177 | &bus_mfc { |
| 178 | devfreq = <&bus_wcore>; |
| 179 | status = "okay"; |
| 180 | }; |
| 181 | |
| 182 | &bus_gen { |
| 183 | devfreq = <&bus_wcore>; |
| 184 | status = "okay"; |
| 185 | }; |
| 186 | |
| 187 | &bus_peri { |
| 188 | devfreq = <&bus_wcore>; |
| 189 | status = "okay"; |
| 190 | }; |
| 191 | |
| 192 | &bus_g2d { |
| 193 | devfreq = <&bus_wcore>; |
| 194 | status = "okay"; |
| 195 | }; |
| 196 | |
| 197 | &bus_g2d_acp { |
| 198 | devfreq = <&bus_wcore>; |
| 199 | status = "okay"; |
| 200 | }; |
| 201 | |
| 202 | &bus_jpeg { |
| 203 | devfreq = <&bus_wcore>; |
| 204 | status = "okay"; |
| 205 | }; |
| 206 | |
| 207 | &bus_jpeg_apb { |
| 208 | devfreq = <&bus_wcore>; |
| 209 | status = "okay"; |
| 210 | }; |
| 211 | |
| 212 | &bus_disp1_fimd { |
| 213 | devfreq = <&bus_wcore>; |
| 214 | status = "okay"; |
| 215 | }; |
| 216 | |
| 217 | &bus_disp1 { |
| 218 | devfreq = <&bus_wcore>; |
| 219 | status = "okay"; |
| 220 | }; |
| 221 | |
| 222 | &bus_gscl_scaler { |
| 223 | devfreq = <&bus_wcore>; |
| 224 | status = "okay"; |
| 225 | }; |
| 226 | |
| 227 | &bus_mscl { |
| 228 | devfreq = <&bus_wcore>; |
| 229 | status = "okay"; |
| 230 | }; |
| 231 | |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 232 | &clock_audss { |
| 233 | assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, |
| 234 | <&clock_audss EXYNOS_MOUT_I2S>, |
| 235 | <&clock_audss EXYNOS_DOUT_AUD_BUS>; |
| 236 | assigned-clock-parents = <&clock CLK_FIN_PLL>, |
| 237 | <&clock_audss EXYNOS_MOUT_AUDSS>; |
| 238 | assigned-clock-rates = <0>, |
| 239 | <0>, |
| 240 | <19200000>; |
| 241 | }; |
| 242 | |
Bartlomiej Zolnierkiewicz | 8b51c5e | 2015-12-15 18:33:15 +0100 | [diff] [blame] | 243 | &cpu0 { |
| 244 | cpu-supply = <&buck6_reg>; |
| 245 | }; |
| 246 | |
| 247 | &cpu4 { |
| 248 | cpu-supply = <&buck2_reg>; |
| 249 | }; |
| 250 | |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 251 | &hdmi { |
| 252 | status = "okay"; |
Javier Martinez Canillas | 31b9903 | 2015-10-08 07:39:58 +0900 | [diff] [blame] | 253 | hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 254 | pinctrl-names = "default"; |
| 255 | pinctrl-0 = <&hdmi_hpd_irq>; |
| 256 | |
| 257 | vdd_osc-supply = <&ldo7_reg>; |
| 258 | vdd_pll-supply = <&ldo6_reg>; |
| 259 | vdd-supply = <&ldo6_reg>; |
| 260 | }; |
| 261 | |
| 262 | &hsi2c_4 { |
| 263 | status = "okay"; |
| 264 | |
| 265 | s2mps11_pmic@66 { |
| 266 | compatible = "samsung,s2mps11-pmic"; |
| 267 | reg = <0x66>; |
Krzysztof Kozlowski | 0fb033b | 2015-08-17 08:55:51 +0900 | [diff] [blame] | 268 | samsung,s2mps11-acokb-ground; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 269 | |
| 270 | interrupt-parent = <&gpx0>; |
| 271 | interrupts = <4 IRQ_TYPE_EDGE_FALLING>; |
| 272 | pinctrl-names = "default"; |
| 273 | pinctrl-0 = <&s2mps11_irq>; |
| 274 | |
| 275 | s2mps11_osc: clocks { |
| 276 | #clock-cells = <1>; |
| 277 | clock-output-names = "s2mps11_ap", |
| 278 | "s2mps11_cp", "s2mps11_bt"; |
| 279 | }; |
| 280 | |
| 281 | regulators { |
| 282 | ldo1_reg: LDO1 { |
| 283 | regulator-name = "vdd_ldo1"; |
| 284 | regulator-min-microvolt = <1000000>; |
| 285 | regulator-max-microvolt = <1000000>; |
| 286 | regulator-always-on; |
| 287 | }; |
| 288 | |
| 289 | ldo3_reg: LDO3 { |
Markus Reichl | 399fc18 | 2016-04-04 11:55:13 +0200 | [diff] [blame] | 290 | regulator-name = "vddq_mmc0"; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 291 | regulator-min-microvolt = <1800000>; |
| 292 | regulator-max-microvolt = <1800000>; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 293 | }; |
| 294 | |
| 295 | ldo5_reg: LDO5 { |
| 296 | regulator-name = "vdd_ldo5"; |
| 297 | regulator-min-microvolt = <1800000>; |
| 298 | regulator-max-microvolt = <1800000>; |
| 299 | regulator-always-on; |
| 300 | }; |
| 301 | |
| 302 | ldo6_reg: LDO6 { |
| 303 | regulator-name = "vdd_ldo6"; |
| 304 | regulator-min-microvolt = <1000000>; |
| 305 | regulator-max-microvolt = <1000000>; |
| 306 | regulator-always-on; |
| 307 | }; |
| 308 | |
| 309 | ldo7_reg: LDO7 { |
| 310 | regulator-name = "vdd_ldo7"; |
| 311 | regulator-min-microvolt = <1800000>; |
| 312 | regulator-max-microvolt = <1800000>; |
| 313 | regulator-always-on; |
| 314 | }; |
| 315 | |
| 316 | ldo8_reg: LDO8 { |
| 317 | regulator-name = "vdd_ldo8"; |
| 318 | regulator-min-microvolt = <1800000>; |
| 319 | regulator-max-microvolt = <1800000>; |
| 320 | regulator-always-on; |
| 321 | }; |
| 322 | |
| 323 | ldo9_reg: LDO9 { |
| 324 | regulator-name = "vdd_ldo9"; |
| 325 | regulator-min-microvolt = <3000000>; |
| 326 | regulator-max-microvolt = <3000000>; |
| 327 | regulator-always-on; |
| 328 | }; |
| 329 | |
| 330 | ldo10_reg: LDO10 { |
| 331 | regulator-name = "vdd_ldo10"; |
| 332 | regulator-min-microvolt = <1800000>; |
| 333 | regulator-max-microvolt = <1800000>; |
| 334 | regulator-always-on; |
| 335 | }; |
| 336 | |
| 337 | ldo11_reg: LDO11 { |
| 338 | regulator-name = "vdd_ldo11"; |
| 339 | regulator-min-microvolt = <1000000>; |
| 340 | regulator-max-microvolt = <1000000>; |
| 341 | regulator-always-on; |
| 342 | }; |
| 343 | |
| 344 | ldo12_reg: LDO12 { |
| 345 | regulator-name = "vdd_ldo12"; |
| 346 | regulator-min-microvolt = <1800000>; |
| 347 | regulator-max-microvolt = <1800000>; |
| 348 | regulator-always-on; |
| 349 | }; |
| 350 | |
| 351 | ldo13_reg: LDO13 { |
Markus Reichl | 399fc18 | 2016-04-04 11:55:13 +0200 | [diff] [blame] | 352 | regulator-name = "vddq_mmc2"; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 353 | regulator-min-microvolt = <2800000>; |
| 354 | regulator-max-microvolt = <2800000>; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 355 | }; |
| 356 | |
| 357 | ldo15_reg: LDO15 { |
| 358 | regulator-name = "vdd_ldo15"; |
| 359 | regulator-min-microvolt = <3100000>; |
| 360 | regulator-max-microvolt = <3100000>; |
| 361 | regulator-always-on; |
| 362 | }; |
| 363 | |
| 364 | ldo16_reg: LDO16 { |
| 365 | regulator-name = "vdd_ldo16"; |
| 366 | regulator-min-microvolt = <2200000>; |
| 367 | regulator-max-microvolt = <2200000>; |
| 368 | regulator-always-on; |
| 369 | }; |
| 370 | |
| 371 | ldo17_reg: LDO17 { |
| 372 | regulator-name = "tsp_avdd"; |
| 373 | regulator-min-microvolt = <3300000>; |
| 374 | regulator-max-microvolt = <3300000>; |
| 375 | regulator-always-on; |
| 376 | }; |
| 377 | |
Markus Reichl | 399fc18 | 2016-04-04 11:55:13 +0200 | [diff] [blame] | 378 | ldo18_reg: LDO18 { |
| 379 | regulator-name = "vdd_emmc_1V8"; |
| 380 | regulator-min-microvolt = <1800000>; |
| 381 | regulator-max-microvolt = <1800000>; |
| 382 | }; |
| 383 | |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 384 | ldo19_reg: LDO19 { |
| 385 | regulator-name = "vdd_sd"; |
| 386 | regulator-min-microvolt = <2800000>; |
| 387 | regulator-max-microvolt = <2800000>; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 388 | }; |
| 389 | |
| 390 | ldo24_reg: LDO24 { |
| 391 | regulator-name = "tsp_io"; |
| 392 | regulator-min-microvolt = <2800000>; |
| 393 | regulator-max-microvolt = <2800000>; |
| 394 | regulator-always-on; |
| 395 | }; |
| 396 | |
| 397 | ldo26_reg: LDO26 { |
| 398 | regulator-name = "vdd_ldo26"; |
| 399 | regulator-min-microvolt = <3000000>; |
| 400 | regulator-max-microvolt = <3000000>; |
| 401 | regulator-always-on; |
| 402 | }; |
| 403 | |
| 404 | buck1_reg: BUCK1 { |
| 405 | regulator-name = "vdd_mif"; |
| 406 | regulator-min-microvolt = <800000>; |
| 407 | regulator-max-microvolt = <1300000>; |
| 408 | regulator-always-on; |
| 409 | regulator-boot-on; |
| 410 | }; |
| 411 | |
| 412 | buck2_reg: BUCK2 { |
| 413 | regulator-name = "vdd_arm"; |
| 414 | regulator-min-microvolt = <800000>; |
| 415 | regulator-max-microvolt = <1500000>; |
| 416 | regulator-always-on; |
| 417 | regulator-boot-on; |
| 418 | }; |
| 419 | |
| 420 | buck3_reg: BUCK3 { |
| 421 | regulator-name = "vdd_int"; |
| 422 | regulator-min-microvolt = <800000>; |
| 423 | regulator-max-microvolt = <1400000>; |
| 424 | regulator-always-on; |
| 425 | regulator-boot-on; |
| 426 | }; |
| 427 | |
| 428 | buck4_reg: BUCK4 { |
| 429 | regulator-name = "vdd_g3d"; |
| 430 | regulator-min-microvolt = <800000>; |
| 431 | regulator-max-microvolt = <1400000>; |
| 432 | regulator-always-on; |
| 433 | regulator-boot-on; |
| 434 | }; |
| 435 | |
| 436 | buck5_reg: BUCK5 { |
| 437 | regulator-name = "vdd_mem"; |
| 438 | regulator-min-microvolt = <800000>; |
| 439 | regulator-max-microvolt = <1400000>; |
| 440 | regulator-always-on; |
| 441 | regulator-boot-on; |
| 442 | }; |
| 443 | |
| 444 | buck6_reg: BUCK6 { |
| 445 | regulator-name = "vdd_kfc"; |
| 446 | regulator-min-microvolt = <800000>; |
| 447 | regulator-max-microvolt = <1500000>; |
| 448 | regulator-always-on; |
| 449 | regulator-boot-on; |
| 450 | }; |
| 451 | |
| 452 | buck7_reg: BUCK7 { |
| 453 | regulator-name = "vdd_1.0v_ldo"; |
| 454 | regulator-min-microvolt = <800000>; |
| 455 | regulator-max-microvolt = <1500000>; |
| 456 | regulator-always-on; |
| 457 | regulator-boot-on; |
| 458 | }; |
| 459 | |
| 460 | buck8_reg: BUCK8 { |
| 461 | regulator-name = "vdd_1.8v_ldo"; |
| 462 | regulator-min-microvolt = <800000>; |
| 463 | regulator-max-microvolt = <1500000>; |
| 464 | regulator-always-on; |
| 465 | regulator-boot-on; |
| 466 | }; |
| 467 | |
| 468 | buck9_reg: BUCK9 { |
| 469 | regulator-name = "vdd_2.8v_ldo"; |
| 470 | regulator-min-microvolt = <3000000>; |
| 471 | regulator-max-microvolt = <3750000>; |
| 472 | regulator-always-on; |
| 473 | regulator-boot-on; |
| 474 | }; |
| 475 | |
| 476 | buck10_reg: BUCK10 { |
| 477 | regulator-name = "vdd_vmem"; |
| 478 | regulator-min-microvolt = <2850000>; |
| 479 | regulator-max-microvolt = <2850000>; |
| 480 | regulator-always-on; |
| 481 | regulator-boot-on; |
| 482 | }; |
| 483 | }; |
| 484 | }; |
| 485 | }; |
| 486 | |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 487 | &i2c_2 { |
| 488 | samsung,i2c-sda-delay = <100>; |
| 489 | samsung,i2c-max-bus-freq = <66000>; |
| 490 | status = "okay"; |
| 491 | |
| 492 | hdmiddc@50 { |
| 493 | compatible = "samsung,exynos4210-hdmiddc"; |
| 494 | reg = <0x50>; |
| 495 | }; |
| 496 | }; |
| 497 | |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 498 | &mmc_0 { |
| 499 | status = "okay"; |
| 500 | mmc-pwrseq = <&emmc_pwrseq>; |
| 501 | cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; |
| 502 | card-detect-delay = <200>; |
| 503 | samsung,dw-mshc-ciu-div = <3>; |
| 504 | samsung,dw-mshc-sdr-timing = <0 4>; |
| 505 | samsung,dw-mshc-ddr-timing = <0 2>; |
| 506 | samsung,dw-mshc-hs400-timing = <0 2>; |
| 507 | samsung,read-strobe-delay = <90>; |
| 508 | pinctrl-names = "default"; |
| 509 | pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; |
| 510 | bus-width = <8>; |
| 511 | cap-mmc-highspeed; |
| 512 | mmc-hs200-1_8v; |
| 513 | mmc-hs400-1_8v; |
Markus Reichl | 399fc18 | 2016-04-04 11:55:13 +0200 | [diff] [blame] | 514 | vmmc-supply = <&ldo18_reg>; |
| 515 | vqmmc-supply = <&ldo3_reg>; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 516 | }; |
| 517 | |
| 518 | &mmc_2 { |
| 519 | status = "okay"; |
| 520 | card-detect-delay = <200>; |
| 521 | samsung,dw-mshc-ciu-div = <3>; |
| 522 | samsung,dw-mshc-sdr-timing = <0 4>; |
| 523 | samsung,dw-mshc-ddr-timing = <0 2>; |
| 524 | pinctrl-names = "default"; |
| 525 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; |
| 526 | bus-width = <4>; |
| 527 | cap-sd-highspeed; |
Markus Reichl | 399fc18 | 2016-04-04 11:55:13 +0200 | [diff] [blame] | 528 | vmmc-supply = <&ldo19_reg>; |
| 529 | vqmmc-supply = <&ldo13_reg>; |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 530 | }; |
| 531 | |
Chanwoo Choi | 3f2129f | 2016-04-15 15:32:55 +0900 | [diff] [blame] | 532 | &nocp_mem0_0 { |
| 533 | status = "okay"; |
| 534 | }; |
| 535 | |
| 536 | &nocp_mem0_1 { |
| 537 | status = "okay"; |
| 538 | }; |
| 539 | |
| 540 | &nocp_mem1_0 { |
| 541 | status = "okay"; |
| 542 | }; |
| 543 | |
| 544 | &nocp_mem1_1 { |
| 545 | status = "okay"; |
| 546 | }; |
| 547 | |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 548 | &pinctrl_0 { |
| 549 | hdmi_hpd_irq: hdmi-hpd-irq { |
| 550 | samsung,pins = "gpx3-7"; |
| 551 | samsung,pin-function = <0>; |
| 552 | samsung,pin-pud = <1>; |
| 553 | samsung,pin-drv = <0>; |
| 554 | }; |
| 555 | |
| 556 | s2mps11_irq: s2mps11-irq { |
| 557 | samsung,pins = "gpx0-4"; |
| 558 | samsung,pin-function = <0xf>; |
| 559 | samsung,pin-pud = <0>; |
| 560 | samsung,pin-drv = <0>; |
| 561 | }; |
| 562 | }; |
| 563 | |
| 564 | &pinctrl_1 { |
| 565 | emmc_nrst_pin: emmc-nrst { |
| 566 | samsung,pins = "gpd1-0"; |
| 567 | samsung,pin-function = <0>; |
| 568 | samsung,pin-pud = <0>; |
| 569 | samsung,pin-drv = <0>; |
| 570 | }; |
| 571 | }; |
| 572 | |
Anand Moon | 8e946a0 | 2015-06-15 12:23:21 +0930 | [diff] [blame] | 573 | &tmu_cpu0 { |
| 574 | vtmu-supply = <&ldo7_reg>; |
Anand Moon | 8e946a0 | 2015-06-15 12:23:21 +0930 | [diff] [blame] | 575 | }; |
| 576 | |
| 577 | &tmu_cpu1 { |
| 578 | vtmu-supply = <&ldo7_reg>; |
Anand Moon | 8e946a0 | 2015-06-15 12:23:21 +0930 | [diff] [blame] | 579 | }; |
| 580 | |
| 581 | &tmu_cpu2 { |
| 582 | vtmu-supply = <&ldo7_reg>; |
Anand Moon | 8e946a0 | 2015-06-15 12:23:21 +0930 | [diff] [blame] | 583 | }; |
| 584 | |
| 585 | &tmu_cpu3 { |
| 586 | vtmu-supply = <&ldo7_reg>; |
Anand Moon | 8e946a0 | 2015-06-15 12:23:21 +0930 | [diff] [blame] | 587 | }; |
| 588 | |
| 589 | &tmu_gpu { |
| 590 | vtmu-supply = <&ldo7_reg>; |
Anand Moon | 8e946a0 | 2015-06-15 12:23:21 +0930 | [diff] [blame] | 591 | }; |
| 592 | |
Krzysztof Kozlowski | 3a7c01d | 2015-05-25 21:13:17 +0900 | [diff] [blame] | 593 | &rtc { |
| 594 | status = "okay"; |
| 595 | clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; |
| 596 | clock-names = "rtc", "rtc_src"; |
| 597 | }; |
| 598 | |
| 599 | &usbdrd_dwc3_0 { |
| 600 | dr_mode = "host"; |
| 601 | }; |
| 602 | |
Krzysztof Kozlowski | 6658356 | 2015-09-16 08:37:11 +0900 | [diff] [blame] | 603 | /* usbdrd_dwc3_1 mode customized in each board */ |
Anand Moon | dc929d4 | 2015-06-07 21:23:47 +0930 | [diff] [blame] | 604 | |
| 605 | &usbdrd3_0 { |
| 606 | vdd33-supply = <&ldo9_reg>; |
| 607 | vdd10-supply = <&ldo11_reg>; |
| 608 | }; |
| 609 | |
| 610 | &usbdrd3_1 { |
| 611 | vdd33-supply = <&ldo9_reg>; |
| 612 | vdd10-supply = <&ldo11_reg>; |
| 613 | }; |