blob: 1b0f070c2676633c52f8b8f2df013f734c1668c4 [file] [log] [blame]
Maxime Hadjinlian2cc64b52013-12-24 13:53:19 +01001/*
2 * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
3 *
4 * This file is licensed under the terms of the GNU General Public
5 * License version 2. This program is licensed "as is" without any
6 * warranty of any kind, whether express or implied.
7 */
8
9/dts-v1/;
10
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/input/input.h>
13#include "kirkwood.dtsi"
14#include "kirkwood-6192.dtsi"
15
16/ {
17 model = "LaCie LaPlug";
18 compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
19
20 memory {
21 device_type = "memory";
22 reg = <0x00000000 0x8000000>; /* 128 MB */
23 };
24
25 chosen {
26 bootargs = "console=ttyS0,115200n8 earlyprintk";
Sebastian Hesselbarthab833612014-04-30 14:56:30 +020027 stdout-path = &uart0;
Maxime Hadjinlian2cc64b52013-12-24 13:53:19 +010028 };
29
Maxime Hadjinlian2cc64b52013-12-24 13:53:19 +010030 ocp@f1000000 {
31 serial@12000 {
Maxime Hadjinlian2cc64b52013-12-24 13:53:19 +010032 status = "okay";
33 };
34
35 i2c@11000 {
Maxime Hadjinlian2cc64b52013-12-24 13:53:19 +010036 status = "okay";
37
38 eeprom@50 {
Andrew Lunn0d606c02014-03-22 13:45:58 +010039 compatible = "atmel,24c04";
Maxime Hadjinlian2cc64b52013-12-24 13:53:19 +010040 pagesize = <16>;
41 reg = <0x50>;
42 };
43 };
44
Sebastian Hesselbartha9483962014-04-30 14:56:32 +020045 pinctrl: pin-controller@10000 {
Maxime Hadjinlian2cc64b52013-12-24 13:53:19 +010046 pmx_usb_power_enable: pmx-usb-power-enable {
47 marvell,pins = "mpp14";
48 marvell,function = "gpio";
49 };
50 };
51 };
52
53 gpio_keys {
54 compatible = "gpio-keys";
55
Andrew Lunn395c7552016-04-03 04:03:43 +020056 power {
Maxime Hadjinlian2cc64b52013-12-24 13:53:19 +010057 label = "Power push button";
58 linux,code = <KEY_POWER>;
59 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
60 };
61 };
62
63 gpio-leds {
64 compatible = "gpio-leds";
65
66 red-fail {
67 label = "laplug_v2:red:power";
68 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
69 };
70 blue-power {
71 label = "laplug_v2:blue:power";
72 gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
73 linux,default-trigger = "default-on";
74 };
75 };
76
77 gpio_poweroff {
78 compatible = "gpio-poweroff";
79 gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
80 };
81
82 regulators {
83 compatible = "simple-bus";
84 #address-cells = <1>;
85 #size-cells = <0>;
86 pinctrl-0 = <&pmx_usb_power_enable>;
87 pinctrl-names = "default";
88
89 usb_power_back1: regulator@1 {
90 compatible = "regulator-fixed";
91 reg = <1>;
92 regulator-name = "USB Power Back 1";
93 regulator-min-microvolt = <5000000>;
94 regulator-max-microvolt = <5000000>;
95 enable-active-high;
96 regulator-always-on;
97 regulator-boot-on;
98 gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
99 };
100
101 usb_power_back2: regulator@2 {
102 compatible = "regulator-fixed";
103 reg = <2>;
104 regulator-name = "USB Power Back 2";
105 regulator-min-microvolt = <5000000>;
106 regulator-max-microvolt = <5000000>;
107 enable-active-high;
108 regulator-always-on;
109 regulator-boot-on;
110 gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
111 };
112
113 usb_power_front: regulator@3 {
114 compatible = "regulator-fixed";
115 reg = <3>;
116 regulator-name = "USB Power Front";
117 regulator-min-microvolt = <5000000>;
118 regulator-max-microvolt = <5000000>;
119 enable-active-high;
120 regulator-always-on;
121 regulator-boot-on;
122 gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
123 };
124 };
125};
126
127&nand {
128 /* Total size : 512MB */
129 status = "okay";
Maxime Hadjinlian2cc64b52013-12-24 13:53:19 +0100130
131 partition@0 {
132 label = "u-boot";
133 reg = <0x0 0x100000>; /* 1MB */
134 read-only;
135 };
136
137 partition@100000 {
138 label = "uImage";
139 reg = <0x100000 0x1000000>; /* 16MB */
140 };
141
142 partition@1100000 {
143 label = "rootfs";
144 reg = <0x1100000 0x1EF00000>; /* 495MB */
145 };
146};
147
148&mdio {
149 status = "okay";
150
151 ethphy0: ethernet-phy@0 {
152 device_type = "ethernet-phy";
153 reg = <0>;
154 };
155};
156
157&eth0 {
158 status = "okay";
159 ethernet0-port@0 {
160 phy-handle = <&ethphy0>;
161 };
162};
Andrew Lunneb13cf82016-04-03 04:03:47 +0200163
164&pciec {
165 status = "okay";
166};
167
168&pcie0 {
169 status = "okay";
170};