blob: 1ebb5d149aef819f6c3b0bd4c35831b55f9f6497 [file] [log] [blame]
Christoph Lameter8199d3a2005-03-30 13:34:31 -08001/*****************************************************************************
2 * *
3 * File: subr.c *
Scott Bardone559fb512005-06-23 01:40:19 -04004 * $Revision: 1.27 $ *
5 * $Date: 2005/06/22 01:08:36 $ *
Christoph Lameter8199d3a2005-03-30 13:34:31 -08006 * Description: *
7 * Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. *
8 * part of the Chelsio 10Gb Ethernet Driver. *
9 * *
10 * This program is free software; you can redistribute it and/or modify *
11 * it under the terms of the GNU General Public License, version 2, as *
12 * published by the Free Software Foundation. *
13 * *
14 * You should have received a copy of the GNU General Public License along *
15 * with this program; if not, write to the Free Software Foundation, Inc., *
16 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
17 * *
18 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
19 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
20 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
21 * *
22 * http://www.chelsio.com *
23 * *
24 * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
25 * All rights reserved. *
26 * *
27 * Maintainers: maintainers@chelsio.com *
28 * *
29 * Authors: Dimitrios Michailidis <dm@chelsio.com> *
30 * Tina Yang <tainay@chelsio.com> *
31 * Felix Marti <felix@chelsio.com> *
32 * Scott Bardone <sbardone@chelsio.com> *
33 * Kurt Ottaway <kottaway@chelsio.com> *
34 * Frank DiMambro <frank@chelsio.com> *
35 * *
36 * History: *
37 * *
38 ****************************************************************************/
39
40#include "common.h"
41#include "elmer0.h"
42#include "regs.h"
Christoph Lameter8199d3a2005-03-30 13:34:31 -080043#include "gmac.h"
44#include "cphy.h"
45#include "sge.h"
Christoph Lameter8199d3a2005-03-30 13:34:31 -080046#include "espi.h"
47
48/**
49 * t1_wait_op_done - wait until an operation is completed
50 * @adapter: the adapter performing the operation
51 * @reg: the register to check for completion
52 * @mask: a single-bit field within @reg that indicates completion
53 * @polarity: the value of the field when the operation is completed
54 * @attempts: number of check iterations
55 * @delay: delay in usecs between iterations
56 *
57 * Wait until an operation is completed by checking a bit in a register
58 * up to @attempts times. Returns %0 if the operation completes and %1
59 * otherwise.
60 */
61static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity,
62 int attempts, int delay)
63{
64 while (1) {
Scott Bardone559fb512005-06-23 01:40:19 -040065 u32 val = readl(adapter->regs + reg) & mask;
Christoph Lameter8199d3a2005-03-30 13:34:31 -080066
67 if (!!val == polarity)
68 return 0;
69 if (--attempts == 0)
70 return 1;
71 if (delay)
72 udelay(delay);
73 }
74}
75
76#define TPI_ATTEMPTS 50
77
78/*
79 * Write a register over the TPI interface (unlocked and locked versions).
80 */
81static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
82{
83 int tpi_busy;
84
Scott Bardone559fb512005-06-23 01:40:19 -040085 writel(addr, adapter->regs + A_TPI_ADDR);
86 writel(value, adapter->regs + A_TPI_WR_DATA);
87 writel(F_TPIWR, adapter->regs + A_TPI_CSR);
Christoph Lameter8199d3a2005-03-30 13:34:31 -080088
89 tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
90 TPI_ATTEMPTS, 3);
91 if (tpi_busy)
92 CH_ALERT("%s: TPI write to 0x%x failed\n",
93 adapter->name, addr);
94 return tpi_busy;
95}
96
97int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
98{
99 int ret;
100
Scott Bardone559fb512005-06-23 01:40:19 -0400101 spin_lock(&(adapter)->tpi_lock);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800102 ret = __t1_tpi_write(adapter, addr, value);
Scott Bardone559fb512005-06-23 01:40:19 -0400103 spin_unlock(&(adapter)->tpi_lock);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800104 return ret;
105}
106
107/*
108 * Read a register over the TPI interface (unlocked and locked versions).
109 */
110static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
111{
112 int tpi_busy;
113
Scott Bardone559fb512005-06-23 01:40:19 -0400114 writel(addr, adapter->regs + A_TPI_ADDR);
115 writel(0, adapter->regs + A_TPI_CSR);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800116
117 tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
118 TPI_ATTEMPTS, 3);
119 if (tpi_busy)
120 CH_ALERT("%s: TPI read from 0x%x failed\n",
121 adapter->name, addr);
122 else
Scott Bardone559fb512005-06-23 01:40:19 -0400123 *valp = readl(adapter->regs + A_TPI_RD_DATA);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800124 return tpi_busy;
125}
126
127int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
128{
129 int ret;
130
Scott Bardone559fb512005-06-23 01:40:19 -0400131 spin_lock(&(adapter)->tpi_lock);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800132 ret = __t1_tpi_read(adapter, addr, valp);
Scott Bardone559fb512005-06-23 01:40:19 -0400133 spin_unlock(&(adapter)->tpi_lock);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800134 return ret;
135}
136
137/*
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800138 * Called when a port's link settings change to propagate the new values to the
139 * associated PHY and MAC. After performing the common tasks it invokes an
140 * OS-specific handler.
141 */
142/* static */ void link_changed(adapter_t *adapter, int port_id)
143{
144 int link_ok, speed, duplex, fc;
145 struct cphy *phy = adapter->port[port_id].phy;
146 struct link_config *lc = &adapter->port[port_id].link_config;
147
148 phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
149
150 lc->speed = speed < 0 ? SPEED_INVALID : speed;
151 lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
152 if (!(lc->requested_fc & PAUSE_AUTONEG))
153 fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
154
155 if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
156 /* Set MAC speed, duplex, and flow control to match PHY. */
157 struct cmac *mac = adapter->port[port_id].mac;
158
159 mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc);
160 lc->fc = (unsigned char)fc;
161 }
162 t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc);
163}
164
165static int t1_pci_intr_handler(adapter_t *adapter)
166{
167 u32 pcix_cause;
168
169 pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause);
170
171 if (pcix_cause) {
172 pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE,
173 pcix_cause);
174 t1_fatal_err(adapter); /* PCI errors are fatal */
175 }
176 return 0;
177}
178
179
180/*
181 * Wait until Elmer's MI1 interface is ready for new operations.
182 */
183static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
184{
185 int attempts = 100, busy;
186
187 do {
188 u32 val;
189
190 __t1_tpi_read(adapter, mi1_reg, &val);
191 busy = val & F_MI1_OP_BUSY;
192 if (busy)
193 udelay(10);
194 } while (busy && --attempts);
195 if (busy)
196 CH_ALERT("%s: MDIO operation timed out\n",
197 adapter->name);
198 return busy;
199}
200
201/*
202 * MI1 MDIO initialization.
203 */
204static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
205{
206 u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1;
207 u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) |
208 V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv);
209
210 if (!(bi->caps & SUPPORTED_10000baseT_Full))
211 val |= V_MI1_SOF(1);
212 t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val);
213}
214
215static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
216 int reg_addr, unsigned int *valp)
217{
218 u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
219
Scott Bardone559fb512005-06-23 01:40:19 -0400220 spin_lock(&(adapter)->tpi_lock);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800221
222 /* Write the address we want. */
223 __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
224 __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
225 __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
226 MI1_OP_INDIRECT_ADDRESS);
227 mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
228
229 /* Write the operation we want. */
230 __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ);
231 mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
232
233 /* Read the data. */
234 __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
Scott Bardone559fb512005-06-23 01:40:19 -0400235 spin_unlock(&(adapter)->tpi_lock);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800236 return 0;
237}
238
239static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
240 int reg_addr, unsigned int val)
241{
242 u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
243
Scott Bardone559fb512005-06-23 01:40:19 -0400244 spin_lock(&(adapter)->tpi_lock);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800245
246 /* Write the address we want. */
247 __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
248 __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
249 __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
250 MI1_OP_INDIRECT_ADDRESS);
251 mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
252
253 /* Write the data. */
254 __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
255 __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE);
256 mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
Scott Bardone559fb512005-06-23 01:40:19 -0400257 spin_unlock(&(adapter)->tpi_lock);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800258 return 0;
259}
260
261static struct mdio_ops mi1_mdio_ext_ops = {
262 mi1_mdio_init,
263 mi1_mdio_ext_read,
264 mi1_mdio_ext_write
265};
266
267enum {
268 CH_BRD_N110_1F,
269 CH_BRD_N210_1F,
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800270};
271
272static struct board_info t1_board[] = {
273
274{ CHBT_BOARD_N110, 1/*ports#*/,
275 SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1,
276 CHBT_MAC_PM3393, CHBT_PHY_88X2010,
277 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
278 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
279 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
280 &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
281 "Chelsio N110 1x10GBaseX NIC" },
282
283{ CHBT_BOARD_N210, 1/*ports#*/,
284 SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2,
285 CHBT_MAC_PM3393, CHBT_PHY_88X2010,
286 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
287 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
288 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
289 &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
290 "Chelsio N210 1x10GBaseX NIC" },
291
292};
293
294struct pci_device_id t1_pci_tbl[] = {
295 CH_DEVICE(7, 0, CH_BRD_N110_1F),
296 CH_DEVICE(10, 1, CH_BRD_N210_1F),
297 { 0, }
298};
299
Scott Bardone559fb512005-06-23 01:40:19 -0400300MODULE_DEVICE_TABLE(pci, t1_pci_tbl);
301
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800302/*
303 * Return the board_info structure with a given index. Out-of-range indices
304 * return NULL.
305 */
306const struct board_info *t1_get_board_info(unsigned int board_id)
307{
Scott Bardone559fb512005-06-23 01:40:19 -0400308 return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL;
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800309}
310
311struct chelsio_vpd_t {
312 u32 format_version;
313 u8 serial_number[16];
314 u8 mac_base_address[6];
315 u8 pad[2]; /* make multiple-of-4 size requirement explicit */
316};
317
318#define EEPROMSIZE (8 * 1024)
319#define EEPROM_MAX_POLL 4
320
321/*
322 * Read SEEPROM. A zero is written to the flag register when the addres is
323 * written to the Control register. The hardware device will set the flag to a
324 * one when 4B have been transferred to the Data register.
325 */
326int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
327{
328 int i = EEPROM_MAX_POLL;
329 u16 val;
330
331 if (addr >= EEPROMSIZE || (addr & 3))
332 return -EINVAL;
333
334 pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr);
335 do {
336 udelay(50);
337 pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val);
338 } while (!(val & F_VPD_OP_FLAG) && --i);
339
340 if (!(val & F_VPD_OP_FLAG)) {
341 CH_ERR("%s: reading EEPROM address 0x%x failed\n",
342 adapter->name, addr);
343 return -EIO;
344 }
345 pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data);
346 *data = le32_to_cpu(*data);
347 return 0;
348}
349
350static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd)
351{
352 int addr, ret = 0;
353
354 for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32))
355 ret = t1_seeprom_read(adapter, addr,
356 (u32 *)((u8 *)vpd + addr));
357
358 return ret;
359}
360
361/*
362 * Read a port's MAC address from the VPD ROM.
363 */
364static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[])
365{
366 struct chelsio_vpd_t vpd;
367
368 if (t1_eeprom_vpd_get(adapter, &vpd))
369 return 1;
370 memcpy(mac_addr, vpd.mac_base_address, 5);
371 mac_addr[5] = vpd.mac_base_address[5] + index;
372 return 0;
373}
374
375/*
376 * Set up the MAC/PHY according to the requested link settings.
377 *
378 * If the PHY can auto-negotiate first decide what to advertise, then
379 * enable/disable auto-negotiation as desired and reset.
380 *
381 * If the PHY does not auto-negotiate we just reset it.
382 *
383 * If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
384 * otherwise do it later based on the outcome of auto-negotiation.
385 */
386int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
387{
388 unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
389
390 if (lc->supported & SUPPORTED_Autoneg) {
391 lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE);
392 if (fc) {
393 lc->advertising |= ADVERTISED_ASYM_PAUSE;
394 if (fc == (PAUSE_RX | PAUSE_TX))
395 lc->advertising |= ADVERTISED_PAUSE;
396 }
397 phy->ops->advertise(phy, lc->advertising);
398
399 if (lc->autoneg == AUTONEG_DISABLE) {
400 lc->speed = lc->requested_speed;
401 lc->duplex = lc->requested_duplex;
402 lc->fc = (unsigned char)fc;
403 mac->ops->set_speed_duplex_fc(mac, lc->speed,
404 lc->duplex, fc);
405 /* Also disables autoneg */
406 phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
407 phy->ops->reset(phy, 0);
408 } else
409 phy->ops->autoneg_enable(phy); /* also resets PHY */
410 } else {
411 mac->ops->set_speed_duplex_fc(mac, -1, -1, fc);
412 lc->fc = (unsigned char)fc;
413 phy->ops->reset(phy, 0);
414 }
415 return 0;
416}
417
418/*
419 * External interrupt handler for boards using elmer0.
420 */
421int elmer0_ext_intr_handler(adapter_t *adapter)
422{
423 struct cphy *phy;
424 int phy_cause;
425 u32 cause;
426
427 t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
428
429 switch (board_info(adapter)->board) {
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800430 case CHBT_BOARD_N210:
431 case CHBT_BOARD_N110:
432 if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
433 phy = adapter->port[0].phy;
434 phy_cause = phy->ops->interrupt_handler(phy);
435 if (phy_cause & cphy_cause_link_change)
436 link_changed(adapter, 0);
437 }
438 break;
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800439 }
440 t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
441 return 0;
442}
443
444/* Enables all interrupts. */
445void t1_interrupts_enable(adapter_t *adapter)
446{
447 unsigned int i;
Scott Bardone559fb512005-06-23 01:40:19 -0400448 u32 pl_intr;
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800449
Scott Bardone559fb512005-06-23 01:40:19 -0400450 adapter->slow_intr_mask = F_PL_INTR_SGE_ERR;
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800451
452 t1_sge_intr_enable(adapter->sge);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800453 if (adapter->espi) {
454 adapter->slow_intr_mask |= F_PL_INTR_ESPI;
455 t1_espi_intr_enable(adapter->espi);
456 }
457
458 /* Enable MAC/PHY interrupts for each port. */
459 for_each_port(adapter, i) {
460 adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac);
461 adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy);
462 }
463
464 /* Enable PCIX & external chip interrupts on ASIC boards. */
Scott Bardone559fb512005-06-23 01:40:19 -0400465 pl_intr = readl(adapter->regs + A_PL_ENABLE);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800466
Scott Bardone559fb512005-06-23 01:40:19 -0400467 /* PCI-X interrupts */
468 pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
469 0xffffffff);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800470
Scott Bardone559fb512005-06-23 01:40:19 -0400471 adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
472 pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
473 writel(pl_intr, adapter->regs + A_PL_ENABLE);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800474}
475
476/* Disables all interrupts. */
477void t1_interrupts_disable(adapter_t* adapter)
478{
479 unsigned int i;
480
481 t1_sge_intr_disable(adapter->sge);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800482 if (adapter->espi)
483 t1_espi_intr_disable(adapter->espi);
484
485 /* Disable MAC/PHY interrupts for each port. */
486 for_each_port(adapter, i) {
487 adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac);
488 adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy);
489 }
490
491 /* Disable PCIX & external chip interrupts. */
Scott Bardone559fb512005-06-23 01:40:19 -0400492 writel(0, adapter->regs + A_PL_ENABLE);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800493
494 /* PCI-X interrupts */
495 pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
496
497 adapter->slow_intr_mask = 0;
498}
499
500/* Clears all interrupts */
501void t1_interrupts_clear(adapter_t* adapter)
502{
503 unsigned int i;
Scott Bardone559fb512005-06-23 01:40:19 -0400504 u32 pl_intr;
505
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800506
507 t1_sge_intr_clear(adapter->sge);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800508 if (adapter->espi)
509 t1_espi_intr_clear(adapter->espi);
510
511 /* Clear MAC/PHY interrupts for each port. */
512 for_each_port(adapter, i) {
513 adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac);
514 adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy);
515 }
516
517 /* Enable interrupts for external devices. */
Scott Bardone559fb512005-06-23 01:40:19 -0400518 pl_intr = readl(adapter->regs + A_PL_CAUSE);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800519
Scott Bardone559fb512005-06-23 01:40:19 -0400520 writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX,
521 adapter->regs + A_PL_CAUSE);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800522
523 /* PCI-X interrupts */
524 pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff);
525}
526
527/*
528 * Slow path interrupt handler for ASICs.
529 */
Scott Bardone559fb512005-06-23 01:40:19 -0400530int t1_slow_intr_handler(adapter_t *adapter)
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800531{
Scott Bardone559fb512005-06-23 01:40:19 -0400532 u32 cause = readl(adapter->regs + A_PL_CAUSE);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800533
534 cause &= adapter->slow_intr_mask;
535 if (!cause)
536 return 0;
537 if (cause & F_PL_INTR_SGE_ERR)
538 t1_sge_intr_error_handler(adapter->sge);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800539 if (cause & F_PL_INTR_ESPI)
540 t1_espi_intr_handler(adapter->espi);
541 if (cause & F_PL_INTR_PCIX)
542 t1_pci_intr_handler(adapter);
543 if (cause & F_PL_INTR_EXT)
544 t1_elmer0_ext_intr(adapter);
545
546 /* Clear the interrupts just processed. */
Scott Bardone559fb512005-06-23 01:40:19 -0400547 writel(cause, adapter->regs + A_PL_CAUSE);
548 (void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800549 return 1;
550}
551
Scott Bardone559fb512005-06-23 01:40:19 -0400552/* Pause deadlock avoidance parameters */
553#define DROP_MSEC 16
554#define DROP_PKTS_CNT 1
555
556static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable)
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800557{
Scott Bardone559fb512005-06-23 01:40:19 -0400558 u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
559
560 if (enable)
561 val |= csum_bit;
562 else
563 val &= ~csum_bit;
564 writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800565}
566
Scott Bardone559fb512005-06-23 01:40:19 -0400567void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable)
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800568{
Scott Bardone559fb512005-06-23 01:40:19 -0400569 set_csum_offload(adapter, F_IP_CSUM, enable);
570}
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800571
Scott Bardone559fb512005-06-23 01:40:19 -0400572void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable)
573{
574 set_csum_offload(adapter, F_UDP_CSUM, enable);
575}
576
577void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable)
578{
579 set_csum_offload(adapter, F_TCP_CSUM, enable);
580}
581
582static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk)
583{
584 u32 val;
585
586 val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
587 F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
588 val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
589 F_TP_IN_ESPI_CHECK_TCP_CSUM;
590 writel(val, adapter->regs + A_TP_IN_CONFIG);
591 writel(F_TP_OUT_CSPI_CPL |
592 F_TP_OUT_ESPI_ETHERNET |
593 F_TP_OUT_ESPI_GENERATE_IP_CSUM |
594 F_TP_OUT_ESPI_GENERATE_TCP_CSUM,
595 adapter->regs + A_TP_OUT_CONFIG);
596
597 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
598 val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM);
599 writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
600
601 /*
602 * Enable pause frame deadlock prevention.
603 */
604 if (is_T2(adapter)) {
605 u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
606
607 writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
608 V_DROP_TICKS_CNT(drop_ticks) |
609 V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
610 adapter->regs + A_TP_TX_DROP_CONFIG);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800611 }
Scott Bardone559fb512005-06-23 01:40:19 -0400612
613 writel(F_TP_RESET, adapter->regs + A_TP_RESET);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800614}
615
616int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
617 struct adapter_params *p)
618{
619 p->chip_version = bi->chip_term;
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800620 if (p->chip_version == CHBT_TERM_T1 ||
Scott Bardone559fb512005-06-23 01:40:19 -0400621 p->chip_version == CHBT_TERM_T2) {
622 u32 val = readl(adapter->regs + A_TP_PC_CONFIG);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800623
624 val = G_TP_PC_REV(val);
625 if (val == 2)
626 p->chip_revision = TERM_T1B;
627 else if (val == 3)
628 p->chip_revision = TERM_T2;
629 else
630 return -1;
631 } else
632 return -1;
633 return 0;
634}
635
636/*
637 * Enable board components other than the Chelsio chip, such as external MAC
638 * and PHY.
639 */
640static int board_init(adapter_t *adapter, const struct board_info *bi)
641{
642 switch (bi->board) {
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800643 case CHBT_BOARD_N110:
644 case CHBT_BOARD_N210:
Scott Bardone559fb512005-06-23 01:40:19 -0400645 writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800646 t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
647 break;
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800648 }
649 return 0;
650}
651
652/*
653 * Initialize and configure the Terminator HW modules. Note that external
654 * MAC and PHYs are initialized separately.
655 */
656int t1_init_hw_modules(adapter_t *adapter)
657{
658 int err = -EIO;
659 const struct board_info *bi = board_info(adapter);
660
Scott Bardone559fb512005-06-23 01:40:19 -0400661 if (!bi->clock_mc4) {
662 u32 val = readl(adapter->regs + A_MC4_CFG);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800663
Scott Bardone559fb512005-06-23 01:40:19 -0400664 writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG);
665 writel(F_M_BUS_ENABLE | F_TCAM_RESET,
666 adapter->regs + A_MC5_CONFIG);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800667 }
668
669 if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac,
670 bi->espi_nports))
671 goto out_err;
672
Scott Bardone559fb512005-06-23 01:40:19 -0400673 t1_tp_reset(adapter, bi->clock_core);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800674
675 err = t1_sge_configure(adapter->sge, &adapter->params.sge);
676 if (err)
677 goto out_err;
678
679 err = 0;
680 out_err:
681 return err;
682}
683
684/*
685 * Determine a card's PCI mode.
686 */
Scott Bardone559fb512005-06-23 01:40:19 -0400687static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p)
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800688{
689 static unsigned short speed_map[] = { 33, 66, 100, 133 };
690 u32 pci_mode;
691
692 pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode);
693 p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)];
694 p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32;
695 p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0;
696}
697
698/*
699 * Release the structures holding the SW per-Terminator-HW-module state.
700 */
701void t1_free_sw_modules(adapter_t *adapter)
702{
703 unsigned int i;
704
705 for_each_port(adapter, i) {
706 struct cmac *mac = adapter->port[i].mac;
707 struct cphy *phy = adapter->port[i].phy;
708
709 if (mac)
710 mac->ops->destroy(mac);
711 if (phy)
712 phy->ops->destroy(phy);
713 }
714
715 if (adapter->sge)
716 t1_sge_destroy(adapter->sge);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800717 if (adapter->espi)
718 t1_espi_destroy(adapter->espi);
719}
720
721static void __devinit init_link_config(struct link_config *lc,
722 const struct board_info *bi)
723{
724 lc->supported = bi->caps;
725 lc->requested_speed = lc->speed = SPEED_INVALID;
726 lc->requested_duplex = lc->duplex = DUPLEX_INVALID;
727 lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
728 if (lc->supported & SUPPORTED_Autoneg) {
729 lc->advertising = lc->supported;
730 lc->autoneg = AUTONEG_ENABLE;
731 lc->requested_fc |= PAUSE_AUTONEG;
732 } else {
733 lc->advertising = 0;
734 lc->autoneg = AUTONEG_DISABLE;
735 }
736}
737
738
739/*
740 * Allocate and initialize the data structures that hold the SW state of
741 * the Terminator HW modules.
742 */
743int __devinit t1_init_sw_modules(adapter_t *adapter,
744 const struct board_info *bi)
745{
746 unsigned int i;
747
748 adapter->params.brd_info = bi;
749 adapter->params.nports = bi->port_number;
750 adapter->params.stats_update_period = bi->gmac->stats_update_period;
751
752 adapter->sge = t1_sge_create(adapter, &adapter->params.sge);
753 if (!adapter->sge) {
754 CH_ERR("%s: SGE initialization failed\n",
755 adapter->name);
756 goto error;
757 }
758
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800759 if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
760 CH_ERR("%s: ESPI initialization failed\n",
761 adapter->name);
762 goto error;
763 }
764
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800765 board_init(adapter, bi);
766 bi->mdio_ops->init(adapter, bi);
767 if (bi->gphy->reset)
768 bi->gphy->reset(adapter);
769 if (bi->gmac->reset)
770 bi->gmac->reset(adapter);
771
772 for_each_port(adapter, i) {
773 u8 hw_addr[6];
774 struct cmac *mac;
775 int phy_addr = bi->mdio_phybaseaddr + i;
776
777 adapter->port[i].phy = bi->gphy->create(adapter, phy_addr,
778 bi->mdio_ops);
779 if (!adapter->port[i].phy) {
780 CH_ERR("%s: PHY %d initialization failed\n",
781 adapter->name, i);
782 goto error;
783 }
784
785 adapter->port[i].mac = mac = bi->gmac->create(adapter, i);
786 if (!mac) {
787 CH_ERR("%s: MAC %d initialization failed\n",
788 adapter->name, i);
789 goto error;
790 }
791
792 /*
793 * Get the port's MAC addresses either from the EEPROM if one
794 * exists or the one hardcoded in the MAC.
795 */
Scott Bardone559fb512005-06-23 01:40:19 -0400796 if (vpd_macaddress_get(adapter, i, hw_addr)) {
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800797 CH_ERR("%s: could not read MAC address from VPD ROM\n",
Scott Bardone559fb512005-06-23 01:40:19 -0400798 adapter->port[i].dev->name);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800799 goto error;
800 }
Scott Bardone559fb512005-06-23 01:40:19 -0400801 memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN);
Christoph Lameter8199d3a2005-03-30 13:34:31 -0800802 init_link_config(&adapter->port[i].link_config, bi);
803 }
804
805 get_pci_mode(adapter, &adapter->params.pci);
806 t1_interrupts_clear(adapter);
807 return 0;
808
809 error:
810 t1_free_sw_modules(adapter);
811 return -1;
812}