Mark Jackson | 5b50c16 | 2008-10-13 13:14:50 +0000 | [diff] [blame] | 1 | /* |
| 2 | * MIMC200 board-specific flash initialization |
| 3 | * |
| 4 | * Copyright (C) 2008 Mercury IMC Ltd |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | */ |
| 10 | #include <linux/init.h> |
| 11 | #include <linux/platform_device.h> |
| 12 | #include <linux/mtd/mtd.h> |
| 13 | #include <linux/mtd/partitions.h> |
| 14 | #include <linux/mtd/physmap.h> |
| 15 | |
| 16 | #include <mach/smc.h> |
| 17 | |
| 18 | static struct smc_timing flash_timing __initdata = { |
| 19 | .ncs_read_setup = 0, |
| 20 | .nrd_setup = 15, |
| 21 | .ncs_write_setup = 0, |
| 22 | .nwe_setup = 0, |
| 23 | |
| 24 | .ncs_read_pulse = 115, |
| 25 | .nrd_pulse = 110, |
| 26 | .ncs_write_pulse = 60, |
| 27 | .nwe_pulse = 60, |
| 28 | |
| 29 | .read_cycle = 115, |
| 30 | .write_cycle = 100, |
| 31 | }; |
| 32 | |
| 33 | static struct smc_config flash_config __initdata = { |
| 34 | .bus_width = 2, |
| 35 | .nrd_controlled = 1, |
| 36 | .nwe_controlled = 1, |
| 37 | .byte_write = 1, |
| 38 | }; |
| 39 | |
| 40 | /* system flash definition */ |
| 41 | |
| 42 | static struct mtd_partition flash_parts_system[] = { |
| 43 | { |
| 44 | .name = "u-boot", |
| 45 | .offset = 0x00000000, |
| 46 | .size = 0x00020000, /* 128 KiB */ |
| 47 | .mask_flags = MTD_WRITEABLE, |
| 48 | }, |
| 49 | { |
| 50 | .name = "root", |
| 51 | .offset = 0x00020000, |
| 52 | .size = 0x007c0000, |
| 53 | }, |
| 54 | { |
| 55 | .name = "splash", |
| 56 | .offset = 0x007e0000, |
| 57 | .size = 0x00010000, /* 64KiB */ |
| 58 | }, |
| 59 | { |
| 60 | .name = "env", |
| 61 | .offset = 0x007f0000, |
| 62 | .size = 0x00010000, |
| 63 | .mask_flags = MTD_WRITEABLE, |
| 64 | }, |
| 65 | }; |
| 66 | |
| 67 | static struct physmap_flash_data flash_system = { |
| 68 | .width = 2, |
| 69 | .nr_parts = ARRAY_SIZE(flash_parts_system), |
| 70 | .parts = flash_parts_system, |
| 71 | }; |
| 72 | |
| 73 | static struct resource flash_resource_system = { |
| 74 | .start = 0x00000000, |
| 75 | .end = 0x007fffff, |
| 76 | .flags = IORESOURCE_MEM, |
| 77 | }; |
| 78 | |
| 79 | static struct platform_device flash_device_system = { |
| 80 | .name = "physmap-flash", |
| 81 | .id = 0, |
| 82 | .resource = &flash_resource_system, |
| 83 | .num_resources = 1, |
| 84 | .dev = { |
| 85 | .platform_data = &flash_system, |
| 86 | }, |
| 87 | }; |
| 88 | |
| 89 | /* data flash definition */ |
| 90 | |
| 91 | static struct mtd_partition flash_parts_data[] = { |
| 92 | { |
| 93 | .name = "data", |
| 94 | .offset = 0x00000000, |
| 95 | .size = 0x00800000, |
| 96 | }, |
| 97 | }; |
| 98 | |
| 99 | static struct physmap_flash_data flash_data = { |
| 100 | .width = 2, |
| 101 | .nr_parts = ARRAY_SIZE(flash_parts_data), |
| 102 | .parts = flash_parts_data, |
| 103 | }; |
| 104 | |
| 105 | static struct resource flash_resource_data = { |
| 106 | .start = 0x08000000, |
| 107 | .end = 0x087fffff, |
| 108 | .flags = IORESOURCE_MEM, |
| 109 | }; |
| 110 | |
| 111 | static struct platform_device flash_device_data = { |
| 112 | .name = "physmap-flash", |
| 113 | .id = 1, |
| 114 | .resource = &flash_resource_data, |
| 115 | .num_resources = 1, |
| 116 | .dev = { |
| 117 | .platform_data = &flash_data, |
| 118 | }, |
| 119 | }; |
| 120 | |
| 121 | /* This needs to be called after the SMC has been initialized */ |
| 122 | static int __init mimc200_flash_init(void) |
| 123 | { |
| 124 | int ret; |
| 125 | |
| 126 | smc_set_timing(&flash_config, &flash_timing); |
| 127 | ret = smc_set_configuration(0, &flash_config); |
| 128 | if (ret < 0) { |
| 129 | printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n"); |
| 130 | return ret; |
| 131 | } |
| 132 | ret = smc_set_configuration(1, &flash_config); |
| 133 | if (ret < 0) { |
| 134 | printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n"); |
| 135 | return ret; |
| 136 | } |
| 137 | |
| 138 | platform_device_register(&flash_device_system); |
| 139 | platform_device_register(&flash_device_data); |
| 140 | |
| 141 | return 0; |
| 142 | } |
| 143 | device_initcall(mimc200_flash_init); |