blob: 5225930a10cd24fd5003d553bfd65ada9e10eebc [file] [log] [blame]
Alexandre Bounine48618fb2011-11-02 13:39:09 -07001/*
2 * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge
3 *
4 * Copyright 2011 Integrated Device Technology, Inc.
5 * Alexandre Bounine <alexandre.bounine@idt.com>
6 * Chul Kim <chul.kim@idt.com>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the Free
10 * Software Foundation; either version 2 of the License, or (at your option)
11 * any later version.
12 *
13 * This program is distributed in the hope that it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * more details.
17 *
18 * You should have received a copy of the GNU General Public License along with
19 * this program; if not, write to the Free Software Foundation, Inc., 59
20 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 */
22
23#include <linux/io.h>
24#include <linux/errno.h>
25#include <linux/init.h>
26#include <linux/ioport.h>
27#include <linux/kernel.h>
28#include <linux/module.h>
29#include <linux/pci.h>
30#include <linux/rio.h>
31#include <linux/rio_drv.h>
32#include <linux/dma-mapping.h>
33#include <linux/interrupt.h>
34#include <linux/kfifo.h>
35#include <linux/delay.h>
36
37#include "tsi721.h"
38
39#define DEBUG_PW /* Inbound Port-Write debugging */
40
41static void tsi721_omsg_handler(struct tsi721_device *priv, int ch);
42static void tsi721_imsg_handler(struct tsi721_device *priv, int ch);
43
44/**
45 * tsi721_lcread - read from local SREP config space
46 * @mport: RapidIO master port info
47 * @index: ID of RapdiIO interface
48 * @offset: Offset into configuration space
49 * @len: Length (in bytes) of the maintenance transaction
50 * @data: Value to be read into
51 *
52 * Generates a local SREP space read. Returns %0 on
53 * success or %-EINVAL on failure.
54 */
55static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset,
56 int len, u32 *data)
57{
58 struct tsi721_device *priv = mport->priv;
59
60 if (len != sizeof(u32))
61 return -EINVAL; /* only 32-bit access is supported */
62
63 *data = ioread32(priv->regs + offset);
64
65 return 0;
66}
67
68/**
69 * tsi721_lcwrite - write into local SREP config space
70 * @mport: RapidIO master port info
71 * @index: ID of RapdiIO interface
72 * @offset: Offset into configuration space
73 * @len: Length (in bytes) of the maintenance transaction
74 * @data: Value to be written
75 *
76 * Generates a local write into SREP configuration space. Returns %0 on
77 * success or %-EINVAL on failure.
78 */
79static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset,
80 int len, u32 data)
81{
82 struct tsi721_device *priv = mport->priv;
83
84 if (len != sizeof(u32))
85 return -EINVAL; /* only 32-bit access is supported */
86
87 iowrite32(data, priv->regs + offset);
88
89 return 0;
90}
91
92/**
93 * tsi721_maint_dma - Helper function to generate RapidIO maintenance
94 * transactions using designated Tsi721 DMA channel.
95 * @priv: pointer to tsi721 private data
96 * @sys_size: RapdiIO transport system size
97 * @destid: Destination ID of transaction
98 * @hopcount: Number of hops to target device
99 * @offset: Offset into configuration space
100 * @len: Length (in bytes) of the maintenance transaction
101 * @data: Location to be read from or write into
102 * @do_wr: Operation flag (1 == MAINT_WR)
103 *
104 * Generates a RapidIO maintenance transaction (Read or Write).
105 * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
106 */
107static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size,
108 u16 destid, u8 hopcount, u32 offset, int len,
109 u32 *data, int do_wr)
110{
111 struct tsi721_dma_desc *bd_ptr;
112 u32 rd_count, swr_ptr, ch_stat;
113 int i, err = 0;
114 u32 op = do_wr ? MAINT_WR : MAINT_RD;
115
116 if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32)))
117 return -EINVAL;
118
119 bd_ptr = priv->bdma[TSI721_DMACH_MAINT].bd_base;
120
121 rd_count = ioread32(
122 priv->regs + TSI721_DMAC_DRDCNT(TSI721_DMACH_MAINT));
123
124 /* Initialize DMA descriptor */
125 bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid);
126 bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04);
127 bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset);
128 bd_ptr[0].raddr_hi = 0;
129 if (do_wr)
130 bd_ptr[0].data[0] = cpu_to_be32p(data);
131 else
132 bd_ptr[0].data[0] = 0xffffffff;
133
134 mb();
135
136 /* Start DMA operation */
137 iowrite32(rd_count + 2,
138 priv->regs + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT));
139 ioread32(priv->regs + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT));
140 i = 0;
141
142 /* Wait until DMA transfer is finished */
143 while ((ch_stat = ioread32(priv->regs +
144 TSI721_DMAC_STS(TSI721_DMACH_MAINT))) & TSI721_DMAC_STS_RUN) {
145 udelay(1);
146 if (++i >= 5000000) {
147 dev_dbg(&priv->pdev->dev,
148 "%s : DMA[%d] read timeout ch_status=%x\n",
149 __func__, TSI721_DMACH_MAINT, ch_stat);
150 if (!do_wr)
151 *data = 0xffffffff;
152 err = -EIO;
153 goto err_out;
154 }
155 }
156
157 if (ch_stat & TSI721_DMAC_STS_ABORT) {
158 /* If DMA operation aborted due to error,
159 * reinitialize DMA channel
160 */
161 dev_dbg(&priv->pdev->dev, "%s : DMA ABORT ch_stat=%x\n",
162 __func__, ch_stat);
163 dev_dbg(&priv->pdev->dev, "OP=%d : destid=%x hc=%x off=%x\n",
164 do_wr ? MAINT_WR : MAINT_RD, destid, hopcount, offset);
165 iowrite32(TSI721_DMAC_INT_ALL,
166 priv->regs + TSI721_DMAC_INT(TSI721_DMACH_MAINT));
167 iowrite32(TSI721_DMAC_CTL_INIT,
168 priv->regs + TSI721_DMAC_CTL(TSI721_DMACH_MAINT));
169 udelay(10);
170 iowrite32(0, priv->regs +
171 TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT));
172 udelay(1);
173 if (!do_wr)
174 *data = 0xffffffff;
175 err = -EIO;
176 goto err_out;
177 }
178
179 if (!do_wr)
180 *data = be32_to_cpu(bd_ptr[0].data[0]);
181
182 /*
183 * Update descriptor status FIFO RD pointer.
184 * NOTE: Skipping check and clear FIFO entries because we are waiting
185 * for transfer to be completed.
186 */
187 swr_ptr = ioread32(priv->regs + TSI721_DMAC_DSWP(TSI721_DMACH_MAINT));
188 iowrite32(swr_ptr, priv->regs + TSI721_DMAC_DSRP(TSI721_DMACH_MAINT));
189err_out:
190
191 return err;
192}
193
194/**
195 * tsi721_cread_dma - Generate a RapidIO maintenance read transaction
196 * using Tsi721 BDMA engine.
197 * @mport: RapidIO master port control structure
198 * @index: ID of RapdiIO interface
199 * @destid: Destination ID of transaction
200 * @hopcount: Number of hops to target device
201 * @offset: Offset into configuration space
202 * @len: Length (in bytes) of the maintenance transaction
203 * @val: Location to be read into
204 *
205 * Generates a RapidIO maintenance read transaction.
206 * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
207 */
208static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid,
209 u8 hopcount, u32 offset, int len, u32 *data)
210{
211 struct tsi721_device *priv = mport->priv;
212
213 return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
214 offset, len, data, 0);
215}
216
217/**
218 * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction
219 * using Tsi721 BDMA engine
220 * @mport: RapidIO master port control structure
221 * @index: ID of RapdiIO interface
222 * @destid: Destination ID of transaction
223 * @hopcount: Number of hops to target device
224 * @offset: Offset into configuration space
225 * @len: Length (in bytes) of the maintenance transaction
226 * @val: Value to be written
227 *
228 * Generates a RapidIO maintenance write transaction.
229 * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
230 */
231static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid,
232 u8 hopcount, u32 offset, int len, u32 data)
233{
234 struct tsi721_device *priv = mport->priv;
235 u32 temp = data;
236
237 return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
238 offset, len, &temp, 1);
239}
240
241/**
242 * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler
243 * @mport: RapidIO master port structure
244 *
245 * Handles inbound port-write interrupts. Copies PW message from an internal
246 * buffer into PW message FIFO and schedules deferred routine to process
247 * queued messages.
248 */
249static int
250tsi721_pw_handler(struct rio_mport *mport)
251{
252 struct tsi721_device *priv = mport->priv;
253 u32 pw_stat;
254 u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)];
255
256
257 pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT);
258
259 if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) {
260 pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0));
261 pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1));
262 pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2));
263 pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3));
264
265 /* Queue PW message (if there is room in FIFO),
266 * otherwise discard it.
267 */
268 spin_lock(&priv->pw_fifo_lock);
269 if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE)
270 kfifo_in(&priv->pw_fifo, pw_buf,
271 TSI721_RIO_PW_MSG_SIZE);
272 else
273 priv->pw_discard_count++;
274 spin_unlock(&priv->pw_fifo_lock);
275 }
276
277 /* Clear pending PW interrupts */
278 iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
279 priv->regs + TSI721_RIO_PW_RX_STAT);
280
281 schedule_work(&priv->pw_work);
282
283 return 0;
284}
285
286static void tsi721_pw_dpc(struct work_struct *work)
287{
288 struct tsi721_device *priv = container_of(work, struct tsi721_device,
289 pw_work);
290 u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; /* Use full size PW message
291 buffer for RIO layer */
292
293 /*
294 * Process port-write messages
295 */
296 while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)msg_buffer,
297 TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) {
298 /* Process one message */
299#ifdef DEBUG_PW
300 {
301 u32 i;
302 pr_debug("%s : Port-Write Message:", __func__);
303 for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); ) {
304 pr_debug("0x%02x: %08x %08x %08x %08x", i*4,
305 msg_buffer[i], msg_buffer[i + 1],
306 msg_buffer[i + 2], msg_buffer[i + 3]);
307 i += 4;
308 }
309 pr_debug("\n");
310 }
311#endif
312 /* Pass the port-write message to RIO core for processing */
313 rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
314 }
315}
316
317/**
318 * tsi721_pw_enable - enable/disable port-write interface init
319 * @mport: Master port implementing the port write unit
320 * @enable: 1=enable; 0=disable port-write message handling
321 */
322static int tsi721_pw_enable(struct rio_mport *mport, int enable)
323{
324 struct tsi721_device *priv = mport->priv;
325 u32 rval;
326
327 rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE);
328
329 if (enable)
330 rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX;
331 else
332 rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX;
333
334 /* Clear pending PW interrupts */
335 iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
336 priv->regs + TSI721_RIO_PW_RX_STAT);
337 /* Update enable bits */
338 iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE);
339
340 return 0;
341}
342
343/**
344 * tsi721_dsend - Send a RapidIO doorbell
345 * @mport: RapidIO master port info
346 * @index: ID of RapidIO interface
347 * @destid: Destination ID of target device
348 * @data: 16-bit info field of RapidIO doorbell
349 *
350 * Sends a RapidIO doorbell message. Always returns %0.
351 */
352static int tsi721_dsend(struct rio_mport *mport, int index,
353 u16 destid, u16 data)
354{
355 struct tsi721_device *priv = mport->priv;
356 u32 offset;
357
358 offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) |
359 (destid << 2);
360
361 dev_dbg(&priv->pdev->dev,
362 "Send Doorbell 0x%04x to destID 0x%x\n", data, destid);
363 iowrite16be(data, priv->odb_base + offset);
364
365 return 0;
366}
367
368/**
369 * tsi721_dbell_handler - Tsi721 doorbell interrupt handler
370 * @mport: RapidIO master port structure
371 *
372 * Handles inbound doorbell interrupts. Copies doorbell entry from an internal
373 * buffer into DB message FIFO and schedules deferred routine to process
374 * queued DBs.
375 */
376static int
377tsi721_dbell_handler(struct rio_mport *mport)
378{
379 struct tsi721_device *priv = mport->priv;
380 u32 regval;
381
382 /* Disable IDB interrupts */
383 regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
384 regval &= ~TSI721_SR_CHINT_IDBQRCV;
385 iowrite32(regval,
386 priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
387
388 schedule_work(&priv->idb_work);
389
390 return 0;
391}
392
393static void tsi721_db_dpc(struct work_struct *work)
394{
395 struct tsi721_device *priv = container_of(work, struct tsi721_device,
396 idb_work);
397 struct rio_mport *mport;
398 struct rio_dbell *dbell;
399 int found = 0;
400 u32 wr_ptr, rd_ptr;
401 u64 *idb_entry;
402 u32 regval;
403 union {
404 u64 msg;
405 u8 bytes[8];
406 } idb;
407
408 /*
409 * Process queued inbound doorbells
410 */
411 mport = priv->mport;
412
413 wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE));
414 rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
415
416 while (wr_ptr != rd_ptr) {
417 idb_entry = (u64 *)(priv->idb_base +
418 (TSI721_IDB_ENTRY_SIZE * rd_ptr));
419 rd_ptr++;
420 idb.msg = *idb_entry;
421 *idb_entry = 0;
422
423 /* Process one doorbell */
424 list_for_each_entry(dbell, &mport->dbells, node) {
425 if ((dbell->res->start <= DBELL_INF(idb.bytes)) &&
426 (dbell->res->end >= DBELL_INF(idb.bytes))) {
427 found = 1;
428 break;
429 }
430 }
431
432 if (found) {
433 dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes),
434 DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
435 } else {
436 dev_dbg(&priv->pdev->dev,
437 "spurious inb doorbell, sid %2.2x tid %2.2x"
438 " info %4.4x\n", DBELL_SID(idb.bytes),
439 DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
440 }
441 }
442
443 iowrite32(rd_ptr & (IDB_QSIZE - 1),
444 priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
445
446 /* Re-enable IDB interrupts */
447 regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
448 regval |= TSI721_SR_CHINT_IDBQRCV;
449 iowrite32(regval,
450 priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
451}
452
453/**
454 * tsi721_irqhandler - Tsi721 interrupt handler
455 * @irq: Linux interrupt number
456 * @ptr: Pointer to interrupt-specific data (mport structure)
457 *
458 * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported
459 * interrupt events and calls an event-specific handler(s).
460 */
461static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
462{
463 struct rio_mport *mport = (struct rio_mport *)ptr;
464 struct tsi721_device *priv = mport->priv;
465 u32 dev_int;
466 u32 dev_ch_int;
467 u32 intval;
468 u32 ch_inte;
469
470 dev_int = ioread32(priv->regs + TSI721_DEV_INT);
471 if (!dev_int)
472 return IRQ_NONE;
473
474 dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT);
475
476 if (dev_int & TSI721_DEV_INT_SR2PC_CH) {
477 /* Service SR2PC Channel interrupts */
478 if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) {
479 /* Service Inbound Doorbell interrupt */
480 intval = ioread32(priv->regs +
481 TSI721_SR_CHINT(IDB_QUEUE));
482 if (intval & TSI721_SR_CHINT_IDBQRCV)
483 tsi721_dbell_handler(mport);
484 else
485 dev_info(&priv->pdev->dev,
486 "Unsupported SR_CH_INT %x\n", intval);
487
488 /* Clear interrupts */
489 iowrite32(intval,
490 priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
491 ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
492 }
493 }
494
495 if (dev_int & TSI721_DEV_INT_SMSG_CH) {
496 int ch;
497
498 /*
499 * Service channel interrupts from Messaging Engine
500 */
501
502 if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */
503 /* Disable signaled OB MSG Channel interrupts */
504 ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
505 ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M);
506 iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
507
508 /*
509 * Process Inbound Message interrupt for each MBOX
510 */
511 for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) {
512 if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch)))
513 continue;
514 tsi721_imsg_handler(priv, ch);
515 }
516 }
517
518 if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */
519 /* Disable signaled OB MSG Channel interrupts */
520 ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
521 ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M);
522 iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
523
524 /*
525 * Process Outbound Message interrupts for each MBOX
526 */
527
528 for (ch = 0; ch < RIO_MAX_MBOX; ch++) {
529 if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch)))
530 continue;
531 tsi721_omsg_handler(priv, ch);
532 }
533 }
534 }
535
536 if (dev_int & TSI721_DEV_INT_SRIO) {
537 /* Service SRIO MAC interrupts */
538 intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
539 if (intval & TSI721_RIO_EM_INT_STAT_PW_RX)
540 tsi721_pw_handler(mport);
541 }
542
543 return IRQ_HANDLED;
544}
545
546static void tsi721_interrupts_init(struct tsi721_device *priv)
547{
548 u32 intr;
549
550 /* Enable IDB interrupts */
551 iowrite32(TSI721_SR_CHINT_ALL,
552 priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
553 iowrite32(TSI721_SR_CHINT_IDBQRCV,
554 priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
555 iowrite32(TSI721_INT_SR2PC_CHAN(IDB_QUEUE),
556 priv->regs + TSI721_DEV_CHAN_INTE);
557
558 /* Enable SRIO MAC interrupts */
559 iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT,
560 priv->regs + TSI721_RIO_EM_DEV_INT_EN);
561
562 if (priv->flags & TSI721_USING_MSIX)
563 intr = TSI721_DEV_INT_SRIO;
564 else
565 intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
566 TSI721_DEV_INT_SMSG_CH;
567
568 iowrite32(intr, priv->regs + TSI721_DEV_INTE);
569 ioread32(priv->regs + TSI721_DEV_INTE);
570}
571
572#ifdef CONFIG_PCI_MSI
573/**
574 * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging
575 * @irq: Linux interrupt number
576 * @ptr: Pointer to interrupt-specific data (mport structure)
577 *
578 * Handles outbound messaging interrupts signaled using MSI-X.
579 */
580static irqreturn_t tsi721_omsg_msix(int irq, void *ptr)
581{
582 struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
583 int mbox;
584
585 mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX;
586 tsi721_omsg_handler(priv, mbox);
587 return IRQ_HANDLED;
588}
589
590/**
591 * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging
592 * @irq: Linux interrupt number
593 * @ptr: Pointer to interrupt-specific data (mport structure)
594 *
595 * Handles inbound messaging interrupts signaled using MSI-X.
596 */
597static irqreturn_t tsi721_imsg_msix(int irq, void *ptr)
598{
599 struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
600 int mbox;
601
602 mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX;
603 tsi721_imsg_handler(priv, mbox + 4);
604 return IRQ_HANDLED;
605}
606
607/**
608 * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler
609 * @irq: Linux interrupt number
610 * @ptr: Pointer to interrupt-specific data (mport structure)
611 *
612 * Handles Tsi721 interrupts from SRIO MAC.
613 */
614static irqreturn_t tsi721_srio_msix(int irq, void *ptr)
615{
616 struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
617 u32 srio_int;
618
619 /* Service SRIO MAC interrupts */
620 srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
621 if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX)
622 tsi721_pw_handler((struct rio_mport *)ptr);
623
624 return IRQ_HANDLED;
625}
626
627/**
628 * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler
629 * @irq: Linux interrupt number
630 * @ptr: Pointer to interrupt-specific data (mport structure)
631 *
632 * Handles Tsi721 interrupts from SR2PC Channel.
633 * NOTE: At this moment services only one SR2PC channel associated with inbound
634 * doorbells.
635 */
636static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr)
637{
638 struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
639 u32 sr_ch_int;
640
641 /* Service Inbound DB interrupt from SR2PC channel */
642 sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
643 if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV)
644 tsi721_dbell_handler((struct rio_mport *)ptr);
645
646 /* Clear interrupts */
647 iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
648 /* Read back to ensure that interrupt was cleared */
649 sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
650
651 return IRQ_HANDLED;
652}
653
654/**
655 * tsi721_request_msix - register interrupt service for MSI-X mode.
656 * @mport: RapidIO master port structure
657 *
658 * Registers MSI-X interrupt service routines for interrupts that are active
659 * immediately after mport initialization. Messaging interrupt service routines
660 * should be registered during corresponding open requests.
661 */
662static int tsi721_request_msix(struct rio_mport *mport)
663{
664 struct tsi721_device *priv = mport->priv;
665 int err = 0;
666
667 err = request_irq(priv->msix[TSI721_VECT_IDB].vector,
668 tsi721_sr2pc_ch_msix, 0,
669 priv->msix[TSI721_VECT_IDB].irq_name, (void *)mport);
670 if (err)
671 goto out;
672
673 err = request_irq(priv->msix[TSI721_VECT_PWRX].vector,
674 tsi721_srio_msix, 0,
675 priv->msix[TSI721_VECT_PWRX].irq_name, (void *)mport);
676 if (err)
677 free_irq(
678 priv->msix[TSI721_VECT_IDB].vector,
679 (void *)mport);
680out:
681 return err;
682}
683
684/**
685 * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721.
686 * @priv: pointer to tsi721 private data
687 *
688 * Configures MSI-X support for Tsi721. Supports only an exact number
689 * of requested vectors.
690 */
691static int tsi721_enable_msix(struct tsi721_device *priv)
692{
693 struct msix_entry entries[TSI721_VECT_MAX];
694 int err;
695 int i;
696
697 entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE);
698 entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT;
699
700 /*
701 * Initialize MSI-X entries for Messaging Engine:
702 * this driver supports four RIO mailboxes (inbound and outbound)
703 * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore
704 * offset +4 is added to IB MBOX number.
705 */
706 for (i = 0; i < RIO_MAX_MBOX; i++) {
707 entries[TSI721_VECT_IMB0_RCV + i].entry =
708 TSI721_MSIX_IMSG_DQ_RCV(i + 4);
709 entries[TSI721_VECT_IMB0_INT + i].entry =
710 TSI721_MSIX_IMSG_INT(i + 4);
711 entries[TSI721_VECT_OMB0_DONE + i].entry =
712 TSI721_MSIX_OMSG_DONE(i);
713 entries[TSI721_VECT_OMB0_INT + i].entry =
714 TSI721_MSIX_OMSG_INT(i);
715 }
716
717 err = pci_enable_msix(priv->pdev, entries, ARRAY_SIZE(entries));
718 if (err) {
719 if (err > 0)
720 dev_info(&priv->pdev->dev,
721 "Only %d MSI-X vectors available, "
722 "not using MSI-X\n", err);
723 return err;
724 }
725
726 /*
727 * Copy MSI-X vector information into tsi721 private structure
728 */
729 priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector;
730 snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX,
731 DRV_NAME "-idb@pci:%s", pci_name(priv->pdev));
732 priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector;
733 snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX,
734 DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev));
735
736 for (i = 0; i < RIO_MAX_MBOX; i++) {
737 priv->msix[TSI721_VECT_IMB0_RCV + i].vector =
738 entries[TSI721_VECT_IMB0_RCV + i].vector;
739 snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name,
740 IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s",
741 i, pci_name(priv->pdev));
742
743 priv->msix[TSI721_VECT_IMB0_INT + i].vector =
744 entries[TSI721_VECT_IMB0_INT + i].vector;
745 snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name,
746 IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s",
747 i, pci_name(priv->pdev));
748
749 priv->msix[TSI721_VECT_OMB0_DONE + i].vector =
750 entries[TSI721_VECT_OMB0_DONE + i].vector;
751 snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name,
752 IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s",
753 i, pci_name(priv->pdev));
754
755 priv->msix[TSI721_VECT_OMB0_INT + i].vector =
756 entries[TSI721_VECT_OMB0_INT + i].vector;
757 snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name,
758 IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s",
759 i, pci_name(priv->pdev));
760 }
761
762 return 0;
763}
764#endif /* CONFIG_PCI_MSI */
765
766static int tsi721_request_irq(struct rio_mport *mport)
767{
768 struct tsi721_device *priv = mport->priv;
769 int err;
770
771#ifdef CONFIG_PCI_MSI
772 if (priv->flags & TSI721_USING_MSIX)
773 err = tsi721_request_msix(mport);
774 else
775#endif
776 err = request_irq(priv->pdev->irq, tsi721_irqhandler,
777 (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED,
778 DRV_NAME, (void *)mport);
779
780 if (err)
781 dev_err(&priv->pdev->dev,
782 "Unable to allocate interrupt, Error: %d\n", err);
783
784 return err;
785}
786
787/**
788 * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO)
789 * translation regions.
790 * @priv: pointer to tsi721 private data
791 *
792 * Disables SREP translation regions.
793 */
794static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv)
795{
796 int i;
797
798 /* Disable all PC2SR translation windows */
799 for (i = 0; i < TSI721_OBWIN_NUM; i++)
800 iowrite32(0, priv->regs + TSI721_OBWINLB(i));
801}
802
803/**
804 * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe)
805 * translation regions.
806 * @priv: pointer to tsi721 private data
807 *
808 * Disables inbound windows.
809 */
810static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv)
811{
812 int i;
813
814 /* Disable all SR2PC inbound windows */
815 for (i = 0; i < TSI721_IBWIN_NUM; i++)
816 iowrite32(0, priv->regs + TSI721_IBWINLB(i));
817}
818
819/**
820 * tsi721_port_write_init - Inbound port write interface init
821 * @priv: pointer to tsi721 private data
822 *
823 * Initializes inbound port write handler.
824 * Returns %0 on success or %-ENOMEM on failure.
825 */
826static int tsi721_port_write_init(struct tsi721_device *priv)
827{
828 priv->pw_discard_count = 0;
829 INIT_WORK(&priv->pw_work, tsi721_pw_dpc);
830 spin_lock_init(&priv->pw_fifo_lock);
831 if (kfifo_alloc(&priv->pw_fifo,
832 TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
833 dev_err(&priv->pdev->dev, "PW FIFO allocation failed\n");
834 return -ENOMEM;
835 }
836
837 /* Use reliable port-write capture mode */
838 iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL);
839 return 0;
840}
841
842static int tsi721_doorbell_init(struct tsi721_device *priv)
843{
844 /* Outbound Doorbells do not require any setup.
845 * Tsi721 uses dedicated PCI BAR1 to generate doorbells.
846 * That BAR1 was mapped during the probe routine.
847 */
848
849 /* Initialize Inbound Doorbell processing DPC and queue */
850 priv->db_discard_count = 0;
851 INIT_WORK(&priv->idb_work, tsi721_db_dpc);
852
853 /* Allocate buffer for inbound doorbells queue */
854 priv->idb_base = dma_alloc_coherent(&priv->pdev->dev,
855 IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
856 &priv->idb_dma, GFP_KERNEL);
857 if (!priv->idb_base)
858 return -ENOMEM;
859
860 memset(priv->idb_base, 0, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE);
861
862 dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n",
863 priv->idb_base, (unsigned long long)priv->idb_dma);
864
865 iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE),
866 priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE));
867 iowrite32(((u64)priv->idb_dma >> 32),
868 priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE));
869 iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR),
870 priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE));
871 /* Enable accepting all inbound doorbells */
872 iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE));
873
874 iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE));
875
876 iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
877
878 return 0;
879}
880
881static void tsi721_doorbell_free(struct tsi721_device *priv)
882{
883 if (priv->idb_base == NULL)
884 return;
885
886 /* Free buffer allocated for inbound doorbell queue */
887 dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
888 priv->idb_base, priv->idb_dma);
889 priv->idb_base = NULL;
890}
891
892static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum)
893{
894 struct tsi721_dma_desc *bd_ptr;
895 u64 *sts_ptr;
896 dma_addr_t bd_phys, sts_phys;
897 int sts_size;
898 int bd_num = priv->bdma[chnum].bd_num;
899
900 dev_dbg(&priv->pdev->dev, "Init Block DMA Engine, CH%d\n", chnum);
901
902 /*
903 * Initialize DMA channel for maintenance requests
904 */
905
906 /* Allocate space for DMA descriptors */
907 bd_ptr = dma_alloc_coherent(&priv->pdev->dev,
908 bd_num * sizeof(struct tsi721_dma_desc),
909 &bd_phys, GFP_KERNEL);
910 if (!bd_ptr)
911 return -ENOMEM;
912
913 priv->bdma[chnum].bd_phys = bd_phys;
914 priv->bdma[chnum].bd_base = bd_ptr;
915
916 memset(bd_ptr, 0, bd_num * sizeof(struct tsi721_dma_desc));
917
918 dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n",
919 bd_ptr, (unsigned long long)bd_phys);
920
921 /* Allocate space for descriptor status FIFO */
922 sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
923 bd_num : TSI721_DMA_MINSTSSZ;
924 sts_size = roundup_pow_of_two(sts_size);
925 sts_ptr = dma_alloc_coherent(&priv->pdev->dev,
926 sts_size * sizeof(struct tsi721_dma_sts),
927 &sts_phys, GFP_KERNEL);
928 if (!sts_ptr) {
929 /* Free space allocated for DMA descriptors */
930 dma_free_coherent(&priv->pdev->dev,
931 bd_num * sizeof(struct tsi721_dma_desc),
932 bd_ptr, bd_phys);
933 priv->bdma[chnum].bd_base = NULL;
934 return -ENOMEM;
935 }
936
937 priv->bdma[chnum].sts_phys = sts_phys;
938 priv->bdma[chnum].sts_base = sts_ptr;
939 priv->bdma[chnum].sts_size = sts_size;
940
941 memset(sts_ptr, 0, sts_size);
942
943 dev_dbg(&priv->pdev->dev,
944 "desc status FIFO @ %p (phys = %llx) size=0x%x\n",
945 sts_ptr, (unsigned long long)sts_phys, sts_size);
946
947 /* Initialize DMA descriptors ring */
948 bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29);
949 bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys &
950 TSI721_DMAC_DPTRL_MASK);
951 bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32);
952
953 /* Setup DMA descriptor pointers */
954 iowrite32(((u64)bd_phys >> 32),
955 priv->regs + TSI721_DMAC_DPTRH(chnum));
956 iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
957 priv->regs + TSI721_DMAC_DPTRL(chnum));
958
959 /* Setup descriptor status FIFO */
960 iowrite32(((u64)sts_phys >> 32),
961 priv->regs + TSI721_DMAC_DSBH(chnum));
962 iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
963 priv->regs + TSI721_DMAC_DSBL(chnum));
964 iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
965 priv->regs + TSI721_DMAC_DSSZ(chnum));
966
967 /* Clear interrupt bits */
968 iowrite32(TSI721_DMAC_INT_ALL,
969 priv->regs + TSI721_DMAC_INT(chnum));
970
971 ioread32(priv->regs + TSI721_DMAC_INT(chnum));
972
973 /* Toggle DMA channel initialization */
974 iowrite32(TSI721_DMAC_CTL_INIT, priv->regs + TSI721_DMAC_CTL(chnum));
975 ioread32(priv->regs + TSI721_DMAC_CTL(chnum));
976 udelay(10);
977
978 return 0;
979}
980
981static int tsi721_bdma_ch_free(struct tsi721_device *priv, int chnum)
982{
983 u32 ch_stat;
984
985 if (priv->bdma[chnum].bd_base == NULL)
986 return 0;
987
988 /* Check if DMA channel still running */
989 ch_stat = ioread32(priv->regs + TSI721_DMAC_STS(chnum));
990 if (ch_stat & TSI721_DMAC_STS_RUN)
991 return -EFAULT;
992
993 /* Put DMA channel into init state */
994 iowrite32(TSI721_DMAC_CTL_INIT,
995 priv->regs + TSI721_DMAC_CTL(chnum));
996
997 /* Free space allocated for DMA descriptors */
998 dma_free_coherent(&priv->pdev->dev,
999 priv->bdma[chnum].bd_num * sizeof(struct tsi721_dma_desc),
1000 priv->bdma[chnum].bd_base, priv->bdma[chnum].bd_phys);
1001 priv->bdma[chnum].bd_base = NULL;
1002
1003 /* Free space allocated for status FIFO */
1004 dma_free_coherent(&priv->pdev->dev,
1005 priv->bdma[chnum].sts_size * sizeof(struct tsi721_dma_sts),
1006 priv->bdma[chnum].sts_base, priv->bdma[chnum].sts_phys);
1007 priv->bdma[chnum].sts_base = NULL;
1008 return 0;
1009}
1010
1011static int tsi721_bdma_init(struct tsi721_device *priv)
1012{
1013 /* Initialize BDMA channel allocated for RapidIO maintenance read/write
1014 * request generation
1015 */
1016 priv->bdma[TSI721_DMACH_MAINT].bd_num = 2;
1017 if (tsi721_bdma_ch_init(priv, TSI721_DMACH_MAINT)) {
1018 dev_err(&priv->pdev->dev, "Unable to initialize maintenance DMA"
1019 " channel %d, aborting\n", TSI721_DMACH_MAINT);
1020 return -ENOMEM;
1021 }
1022
1023 return 0;
1024}
1025
1026static void tsi721_bdma_free(struct tsi721_device *priv)
1027{
1028 tsi721_bdma_ch_free(priv, TSI721_DMACH_MAINT);
1029}
1030
1031/* Enable Inbound Messaging Interrupts */
1032static void
1033tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch,
1034 u32 inte_mask)
1035{
1036 u32 rval;
1037
1038 if (!inte_mask)
1039 return;
1040
1041 /* Clear pending Inbound Messaging interrupts */
1042 iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
1043
1044 /* Enable Inbound Messaging interrupts */
1045 rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
1046 iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch));
1047
1048 if (priv->flags & TSI721_USING_MSIX)
1049 return; /* Finished if we are in MSI-X mode */
1050
1051 /*
1052 * For MSI and INTA interrupt signalling we need to enable next levels
1053 */
1054
1055 /* Enable Device Channel Interrupt */
1056 rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1057 iowrite32(rval | TSI721_INT_IMSG_CHAN(ch),
1058 priv->regs + TSI721_DEV_CHAN_INTE);
1059}
1060
1061/* Disable Inbound Messaging Interrupts */
1062static void
1063tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch,
1064 u32 inte_mask)
1065{
1066 u32 rval;
1067
1068 if (!inte_mask)
1069 return;
1070
1071 /* Clear pending Inbound Messaging interrupts */
1072 iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
1073
1074 /* Disable Inbound Messaging interrupts */
1075 rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
1076 rval &= ~inte_mask;
1077 iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch));
1078
1079 if (priv->flags & TSI721_USING_MSIX)
1080 return; /* Finished if we are in MSI-X mode */
1081
1082 /*
1083 * For MSI and INTA interrupt signalling we need to disable next levels
1084 */
1085
1086 /* Disable Device Channel Interrupt */
1087 rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1088 rval &= ~TSI721_INT_IMSG_CHAN(ch);
1089 iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
1090}
1091
1092/* Enable Outbound Messaging interrupts */
1093static void
1094tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch,
1095 u32 inte_mask)
1096{
1097 u32 rval;
1098
1099 if (!inte_mask)
1100 return;
1101
1102 /* Clear pending Outbound Messaging interrupts */
1103 iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
1104
1105 /* Enable Outbound Messaging channel interrupts */
1106 rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
1107 iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch));
1108
1109 if (priv->flags & TSI721_USING_MSIX)
1110 return; /* Finished if we are in MSI-X mode */
1111
1112 /*
1113 * For MSI and INTA interrupt signalling we need to enable next levels
1114 */
1115
1116 /* Enable Device Channel Interrupt */
1117 rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1118 iowrite32(rval | TSI721_INT_OMSG_CHAN(ch),
1119 priv->regs + TSI721_DEV_CHAN_INTE);
1120}
1121
1122/* Disable Outbound Messaging interrupts */
1123static void
1124tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch,
1125 u32 inte_mask)
1126{
1127 u32 rval;
1128
1129 if (!inte_mask)
1130 return;
1131
1132 /* Clear pending Outbound Messaging interrupts */
1133 iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
1134
1135 /* Disable Outbound Messaging interrupts */
1136 rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
1137 rval &= ~inte_mask;
1138 iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch));
1139
1140 if (priv->flags & TSI721_USING_MSIX)
1141 return; /* Finished if we are in MSI-X mode */
1142
1143 /*
1144 * For MSI and INTA interrupt signalling we need to disable next levels
1145 */
1146
1147 /* Disable Device Channel Interrupt */
1148 rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1149 rval &= ~TSI721_INT_OMSG_CHAN(ch);
1150 iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
1151}
1152
1153/**
1154 * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue
1155 * @mport: Master port with outbound message queue
1156 * @rdev: Target of outbound message
1157 * @mbox: Outbound mailbox
1158 * @buffer: Message to add to outbound queue
1159 * @len: Length of message
1160 */
1161static int
1162tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
1163 void *buffer, size_t len)
1164{
1165 struct tsi721_device *priv = mport->priv;
1166 struct tsi721_omsg_desc *desc;
1167 u32 tx_slot;
1168
1169 if (!priv->omsg_init[mbox] ||
1170 len > TSI721_MSG_MAX_SIZE || len < 8)
1171 return -EINVAL;
1172
1173 tx_slot = priv->omsg_ring[mbox].tx_slot;
1174
1175 /* Copy copy message into transfer buffer */
1176 memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len);
1177
1178 if (len & 0x7)
1179 len += 8;
1180
1181 /* Build descriptor associated with buffer */
1182 desc = priv->omsg_ring[mbox].omd_base;
1183 desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid);
1184 if (tx_slot % 4 == 0)
1185 desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF);
1186
1187 desc[tx_slot].msg_info =
1188 cpu_to_le32((mport->sys_size << 26) | (mbox << 22) |
1189 (0xe << 12) | (len & 0xff8));
1190 desc[tx_slot].bufptr_lo =
1191 cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] &
1192 0xffffffff);
1193 desc[tx_slot].bufptr_hi =
1194 cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32);
1195
1196 priv->omsg_ring[mbox].wr_count++;
1197
1198 /* Go to next descriptor */
1199 if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) {
1200 priv->omsg_ring[mbox].tx_slot = 0;
1201 /* Move through the ring link descriptor at the end */
1202 priv->omsg_ring[mbox].wr_count++;
1203 }
1204
1205 mb();
1206
1207 /* Set new write count value */
1208 iowrite32(priv->omsg_ring[mbox].wr_count,
1209 priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
1210 ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
1211
1212 return 0;
1213}
1214
1215/**
1216 * tsi721_omsg_handler - Outbound Message Interrupt Handler
1217 * @priv: pointer to tsi721 private data
1218 * @ch: number of OB MSG channel to service
1219 *
1220 * Services channel interrupts from outbound messaging engine.
1221 */
1222static void tsi721_omsg_handler(struct tsi721_device *priv, int ch)
1223{
1224 u32 omsg_int;
1225
1226 spin_lock(&priv->omsg_ring[ch].lock);
1227
1228 omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch));
1229
1230 if (omsg_int & TSI721_OBDMAC_INT_ST_FULL)
1231 dev_info(&priv->pdev->dev,
1232 "OB MBOX%d: Status FIFO is full\n", ch);
1233
1234 if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) {
1235 u32 srd_ptr;
1236 u64 *sts_ptr, last_ptr = 0, prev_ptr = 0;
1237 int i, j;
1238 u32 tx_slot;
1239
1240 /*
1241 * Find last successfully processed descriptor
1242 */
1243
1244 /* Check and clear descriptor status FIFO entries */
1245 srd_ptr = priv->omsg_ring[ch].sts_rdptr;
1246 sts_ptr = priv->omsg_ring[ch].sts_base;
1247 j = srd_ptr * 8;
1248 while (sts_ptr[j]) {
1249 for (i = 0; i < 8 && sts_ptr[j]; i++, j++) {
1250 prev_ptr = last_ptr;
1251 last_ptr = le64_to_cpu(sts_ptr[j]);
1252 sts_ptr[j] = 0;
1253 }
1254
1255 ++srd_ptr;
1256 srd_ptr %= priv->omsg_ring[ch].sts_size;
1257 j = srd_ptr * 8;
1258 }
1259
1260 if (last_ptr == 0)
1261 goto no_sts_update;
1262
1263 priv->omsg_ring[ch].sts_rdptr = srd_ptr;
1264 iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch));
1265
1266 if (!priv->mport->outb_msg[ch].mcback)
1267 goto no_sts_update;
1268
1269 /* Inform upper layer about transfer completion */
1270
1271 tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/
1272 sizeof(struct tsi721_omsg_desc);
1273
1274 /*
1275 * Check if this is a Link Descriptor (LD).
1276 * If yes, ignore LD and use descriptor processed
1277 * before LD.
1278 */
1279 if (tx_slot == priv->omsg_ring[ch].size) {
1280 if (prev_ptr)
1281 tx_slot = (prev_ptr -
1282 (u64)priv->omsg_ring[ch].omd_phys)/
1283 sizeof(struct tsi721_omsg_desc);
1284 else
1285 goto no_sts_update;
1286 }
1287
1288 /* Move slot index to the next message to be sent */
1289 ++tx_slot;
1290 if (tx_slot == priv->omsg_ring[ch].size)
1291 tx_slot = 0;
1292 BUG_ON(tx_slot >= priv->omsg_ring[ch].size);
1293 priv->mport->outb_msg[ch].mcback(priv->mport,
1294 priv->omsg_ring[ch].dev_id, ch,
1295 tx_slot);
1296 }
1297
1298no_sts_update:
1299
1300 if (omsg_int & TSI721_OBDMAC_INT_ERROR) {
1301 /*
1302 * Outbound message operation aborted due to error,
1303 * reinitialize OB MSG channel
1304 */
1305
1306 dev_dbg(&priv->pdev->dev, "OB MSG ABORT ch_stat=%x\n",
1307 ioread32(priv->regs + TSI721_OBDMAC_STS(ch)));
1308
1309 iowrite32(TSI721_OBDMAC_INT_ERROR,
1310 priv->regs + TSI721_OBDMAC_INT(ch));
1311 iowrite32(TSI721_OBDMAC_CTL_INIT,
1312 priv->regs + TSI721_OBDMAC_CTL(ch));
1313 ioread32(priv->regs + TSI721_OBDMAC_CTL(ch));
1314
1315 /* Inform upper level to clear all pending tx slots */
1316 if (priv->mport->outb_msg[ch].mcback)
1317 priv->mport->outb_msg[ch].mcback(priv->mport,
1318 priv->omsg_ring[ch].dev_id, ch,
1319 priv->omsg_ring[ch].tx_slot);
1320 /* Synch tx_slot tracking */
1321 iowrite32(priv->omsg_ring[ch].tx_slot,
1322 priv->regs + TSI721_OBDMAC_DRDCNT(ch));
1323 ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch));
1324 priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot;
1325 priv->omsg_ring[ch].sts_rdptr = 0;
1326 }
1327
1328 /* Clear channel interrupts */
1329 iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch));
1330
1331 if (!(priv->flags & TSI721_USING_MSIX)) {
1332 u32 ch_inte;
1333
1334 /* Re-enable channel interrupts */
1335 ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1336 ch_inte |= TSI721_INT_OMSG_CHAN(ch);
1337 iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
1338 }
1339
1340 spin_unlock(&priv->omsg_ring[ch].lock);
1341}
1342
1343/**
1344 * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox
1345 * @mport: Master port implementing Outbound Messaging Engine
1346 * @dev_id: Device specific pointer to pass on event
1347 * @mbox: Mailbox to open
1348 * @entries: Number of entries in the outbound mailbox ring
1349 */
1350static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id,
1351 int mbox, int entries)
1352{
1353 struct tsi721_device *priv = mport->priv;
1354 struct tsi721_omsg_desc *bd_ptr;
1355 int i, rc = 0;
1356
1357 if ((entries < TSI721_OMSGD_MIN_RING_SIZE) ||
1358 (entries > (TSI721_OMSGD_RING_SIZE)) ||
1359 (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
1360 rc = -EINVAL;
1361 goto out;
1362 }
1363
1364 priv->omsg_ring[mbox].dev_id = dev_id;
1365 priv->omsg_ring[mbox].size = entries;
1366 priv->omsg_ring[mbox].sts_rdptr = 0;
1367 spin_lock_init(&priv->omsg_ring[mbox].lock);
1368
1369 /* Outbound Msg Buffer allocation based on
1370 the number of maximum descriptor entries */
1371 for (i = 0; i < entries; i++) {
1372 priv->omsg_ring[mbox].omq_base[i] =
1373 dma_alloc_coherent(
1374 &priv->pdev->dev, TSI721_MSG_BUFFER_SIZE,
1375 &priv->omsg_ring[mbox].omq_phys[i],
1376 GFP_KERNEL);
1377 if (priv->omsg_ring[mbox].omq_base[i] == NULL) {
1378 dev_dbg(&priv->pdev->dev,
1379 "Unable to allocate OB MSG data buffer for"
1380 " MBOX%d\n", mbox);
1381 rc = -ENOMEM;
1382 goto out_buf;
1383 }
1384 }
1385
1386 /* Outbound message descriptor allocation */
1387 priv->omsg_ring[mbox].omd_base = dma_alloc_coherent(
1388 &priv->pdev->dev,
1389 (entries + 1) * sizeof(struct tsi721_omsg_desc),
1390 &priv->omsg_ring[mbox].omd_phys, GFP_KERNEL);
1391 if (priv->omsg_ring[mbox].omd_base == NULL) {
1392 dev_dbg(&priv->pdev->dev,
1393 "Unable to allocate OB MSG descriptor memory "
1394 "for MBOX%d\n", mbox);
1395 rc = -ENOMEM;
1396 goto out_buf;
1397 }
1398
1399 priv->omsg_ring[mbox].tx_slot = 0;
1400
1401 /* Outbound message descriptor status FIFO allocation */
1402 priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1);
1403 priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev,
1404 priv->omsg_ring[mbox].sts_size *
1405 sizeof(struct tsi721_dma_sts),
1406 &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL);
1407 if (priv->omsg_ring[mbox].sts_base == NULL) {
1408 dev_dbg(&priv->pdev->dev,
1409 "Unable to allocate OB MSG descriptor status FIFO "
1410 "for MBOX%d\n", mbox);
1411 rc = -ENOMEM;
1412 goto out_desc;
1413 }
1414
1415 memset(priv->omsg_ring[mbox].sts_base, 0,
1416 entries * sizeof(struct tsi721_dma_sts));
1417
1418 /*
1419 * Configure Outbound Messaging Engine
1420 */
1421
1422 /* Setup Outbound Message descriptor pointer */
1423 iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32),
1424 priv->regs + TSI721_OBDMAC_DPTRH(mbox));
1425 iowrite32(((u64)priv->omsg_ring[mbox].omd_phys &
1426 TSI721_OBDMAC_DPTRL_MASK),
1427 priv->regs + TSI721_OBDMAC_DPTRL(mbox));
1428
1429 /* Setup Outbound Message descriptor status FIFO */
1430 iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32),
1431 priv->regs + TSI721_OBDMAC_DSBH(mbox));
1432 iowrite32(((u64)priv->omsg_ring[mbox].sts_phys &
1433 TSI721_OBDMAC_DSBL_MASK),
1434 priv->regs + TSI721_OBDMAC_DSBL(mbox));
1435 iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size),
1436 priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox));
1437
1438 /* Enable interrupts */
1439
1440#ifdef CONFIG_PCI_MSI
1441 if (priv->flags & TSI721_USING_MSIX) {
1442 /* Request interrupt service if we are in MSI-X mode */
1443 rc = request_irq(
1444 priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
1445 tsi721_omsg_msix, 0,
1446 priv->msix[TSI721_VECT_OMB0_DONE + mbox].irq_name,
1447 (void *)mport);
1448
1449 if (rc) {
1450 dev_dbg(&priv->pdev->dev,
1451 "Unable to allocate MSI-X interrupt for "
1452 "OBOX%d-DONE\n", mbox);
1453 goto out_stat;
1454 }
1455
1456 rc = request_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
1457 tsi721_omsg_msix, 0,
1458 priv->msix[TSI721_VECT_OMB0_INT + mbox].irq_name,
1459 (void *)mport);
1460
1461 if (rc) {
1462 dev_dbg(&priv->pdev->dev,
1463 "Unable to allocate MSI-X interrupt for "
1464 "MBOX%d-INT\n", mbox);
1465 free_irq(
1466 priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
1467 (void *)mport);
1468 goto out_stat;
1469 }
1470 }
1471#endif /* CONFIG_PCI_MSI */
1472
1473 tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL);
1474
1475 /* Initialize Outbound Message descriptors ring */
1476 bd_ptr = priv->omsg_ring[mbox].omd_base;
1477 bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29);
1478 bd_ptr[entries].msg_info = 0;
1479 bd_ptr[entries].next_lo =
1480 cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys &
1481 TSI721_OBDMAC_DPTRL_MASK);
1482 bd_ptr[entries].next_hi =
1483 cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32);
1484 priv->omsg_ring[mbox].wr_count = 0;
1485 mb();
1486
1487 /* Initialize Outbound Message engine */
1488 iowrite32(TSI721_OBDMAC_CTL_INIT, priv->regs + TSI721_OBDMAC_CTL(mbox));
1489 ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
1490 udelay(10);
1491
1492 priv->omsg_init[mbox] = 1;
1493
1494 return 0;
1495
1496#ifdef CONFIG_PCI_MSI
1497out_stat:
1498 dma_free_coherent(&priv->pdev->dev,
1499 priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
1500 priv->omsg_ring[mbox].sts_base,
1501 priv->omsg_ring[mbox].sts_phys);
1502
1503 priv->omsg_ring[mbox].sts_base = NULL;
1504#endif /* CONFIG_PCI_MSI */
1505
1506out_desc:
1507 dma_free_coherent(&priv->pdev->dev,
1508 (entries + 1) * sizeof(struct tsi721_omsg_desc),
1509 priv->omsg_ring[mbox].omd_base,
1510 priv->omsg_ring[mbox].omd_phys);
1511
1512 priv->omsg_ring[mbox].omd_base = NULL;
1513
1514out_buf:
1515 for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
1516 if (priv->omsg_ring[mbox].omq_base[i]) {
1517 dma_free_coherent(&priv->pdev->dev,
1518 TSI721_MSG_BUFFER_SIZE,
1519 priv->omsg_ring[mbox].omq_base[i],
1520 priv->omsg_ring[mbox].omq_phys[i]);
1521
1522 priv->omsg_ring[mbox].omq_base[i] = NULL;
1523 }
1524 }
1525
1526out:
1527 return rc;
1528}
1529
1530/**
1531 * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox
1532 * @mport: Master port implementing the outbound message unit
1533 * @mbox: Mailbox to close
1534 */
1535static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox)
1536{
1537 struct tsi721_device *priv = mport->priv;
1538 u32 i;
1539
1540 if (!priv->omsg_init[mbox])
1541 return;
1542 priv->omsg_init[mbox] = 0;
1543
1544 /* Disable Interrupts */
1545
1546 tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL);
1547
1548#ifdef CONFIG_PCI_MSI
1549 if (priv->flags & TSI721_USING_MSIX) {
1550 free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
1551 (void *)mport);
1552 free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
1553 (void *)mport);
1554 }
1555#endif /* CONFIG_PCI_MSI */
1556
1557 /* Free OMSG Descriptor Status FIFO */
1558 dma_free_coherent(&priv->pdev->dev,
1559 priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
1560 priv->omsg_ring[mbox].sts_base,
1561 priv->omsg_ring[mbox].sts_phys);
1562
1563 priv->omsg_ring[mbox].sts_base = NULL;
1564
1565 /* Free OMSG descriptors */
1566 dma_free_coherent(&priv->pdev->dev,
1567 (priv->omsg_ring[mbox].size + 1) *
1568 sizeof(struct tsi721_omsg_desc),
1569 priv->omsg_ring[mbox].omd_base,
1570 priv->omsg_ring[mbox].omd_phys);
1571
1572 priv->omsg_ring[mbox].omd_base = NULL;
1573
1574 /* Free message buffers */
1575 for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
1576 if (priv->omsg_ring[mbox].omq_base[i]) {
1577 dma_free_coherent(&priv->pdev->dev,
1578 TSI721_MSG_BUFFER_SIZE,
1579 priv->omsg_ring[mbox].omq_base[i],
1580 priv->omsg_ring[mbox].omq_phys[i]);
1581
1582 priv->omsg_ring[mbox].omq_base[i] = NULL;
1583 }
1584 }
1585}
1586
1587/**
1588 * tsi721_imsg_handler - Inbound Message Interrupt Handler
1589 * @priv: pointer to tsi721 private data
1590 * @ch: inbound message channel number to service
1591 *
1592 * Services channel interrupts from inbound messaging engine.
1593 */
1594static void tsi721_imsg_handler(struct tsi721_device *priv, int ch)
1595{
1596 u32 mbox = ch - 4;
1597 u32 imsg_int;
1598
1599 spin_lock(&priv->imsg_ring[mbox].lock);
1600
1601 imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch));
1602
1603 if (imsg_int & TSI721_IBDMAC_INT_SRTO)
1604 dev_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout\n",
1605 mbox);
1606
1607 if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR)
1608 dev_info(&priv->pdev->dev, "IB MBOX%d PCIe error\n",
1609 mbox);
1610
1611 if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW)
1612 dev_info(&priv->pdev->dev,
1613 "IB MBOX%d IB free queue low\n", mbox);
1614
1615 /* Clear IB channel interrupts */
1616 iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch));
1617
1618 /* If an IB Msg is received notify the upper layer */
1619 if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV &&
1620 priv->mport->inb_msg[mbox].mcback)
1621 priv->mport->inb_msg[mbox].mcback(priv->mport,
1622 priv->imsg_ring[mbox].dev_id, mbox, -1);
1623
1624 if (!(priv->flags & TSI721_USING_MSIX)) {
1625 u32 ch_inte;
1626
1627 /* Re-enable channel interrupts */
1628 ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
1629 ch_inte |= TSI721_INT_IMSG_CHAN(ch);
1630 iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
1631 }
1632
1633 spin_unlock(&priv->imsg_ring[mbox].lock);
1634}
1635
1636/**
1637 * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox
1638 * @mport: Master port implementing the Inbound Messaging Engine
1639 * @dev_id: Device specific pointer to pass on event
1640 * @mbox: Mailbox to open
1641 * @entries: Number of entries in the inbound mailbox ring
1642 */
1643static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id,
1644 int mbox, int entries)
1645{
1646 struct tsi721_device *priv = mport->priv;
1647 int ch = mbox + 4;
1648 int i;
1649 u64 *free_ptr;
1650 int rc = 0;
1651
1652 if ((entries < TSI721_IMSGD_MIN_RING_SIZE) ||
1653 (entries > TSI721_IMSGD_RING_SIZE) ||
1654 (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
1655 rc = -EINVAL;
1656 goto out;
1657 }
1658
1659 /* Initialize IB Messaging Ring */
1660 priv->imsg_ring[mbox].dev_id = dev_id;
1661 priv->imsg_ring[mbox].size = entries;
1662 priv->imsg_ring[mbox].rx_slot = 0;
1663 priv->imsg_ring[mbox].desc_rdptr = 0;
1664 priv->imsg_ring[mbox].fq_wrptr = 0;
1665 for (i = 0; i < priv->imsg_ring[mbox].size; i++)
1666 priv->imsg_ring[mbox].imq_base[i] = NULL;
1667 spin_lock_init(&priv->imsg_ring[mbox].lock);
1668
1669 /* Allocate buffers for incoming messages */
1670 priv->imsg_ring[mbox].buf_base =
1671 dma_alloc_coherent(&priv->pdev->dev,
1672 entries * TSI721_MSG_BUFFER_SIZE,
1673 &priv->imsg_ring[mbox].buf_phys,
1674 GFP_KERNEL);
1675
1676 if (priv->imsg_ring[mbox].buf_base == NULL) {
1677 dev_err(&priv->pdev->dev,
1678 "Failed to allocate buffers for IB MBOX%d\n", mbox);
1679 rc = -ENOMEM;
1680 goto out;
1681 }
1682
1683 /* Allocate memory for circular free list */
1684 priv->imsg_ring[mbox].imfq_base =
1685 dma_alloc_coherent(&priv->pdev->dev,
1686 entries * 8,
1687 &priv->imsg_ring[mbox].imfq_phys,
1688 GFP_KERNEL);
1689
1690 if (priv->imsg_ring[mbox].imfq_base == NULL) {
1691 dev_err(&priv->pdev->dev,
1692 "Failed to allocate free queue for IB MBOX%d\n", mbox);
1693 rc = -ENOMEM;
1694 goto out_buf;
1695 }
1696
1697 /* Allocate memory for Inbound message descriptors */
1698 priv->imsg_ring[mbox].imd_base =
1699 dma_alloc_coherent(&priv->pdev->dev,
1700 entries * sizeof(struct tsi721_imsg_desc),
1701 &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL);
1702
1703 if (priv->imsg_ring[mbox].imd_base == NULL) {
1704 dev_err(&priv->pdev->dev,
1705 "Failed to allocate descriptor memory for IB MBOX%d\n",
1706 mbox);
1707 rc = -ENOMEM;
1708 goto out_dma;
1709 }
1710
1711 /* Fill free buffer pointer list */
1712 free_ptr = priv->imsg_ring[mbox].imfq_base;
1713 for (i = 0; i < entries; i++)
1714 free_ptr[i] = cpu_to_le64(
1715 (u64)(priv->imsg_ring[mbox].buf_phys) +
1716 i * 0x1000);
1717
1718 mb();
1719
1720 /*
1721 * For mapping of inbound SRIO Messages into appropriate queues we need
1722 * to set Inbound Device ID register in the messaging engine. We do it
1723 * once when first inbound mailbox is requested.
1724 */
1725 if (!(priv->flags & TSI721_IMSGID_SET)) {
1726 iowrite32((u32)priv->mport->host_deviceid,
1727 priv->regs + TSI721_IB_DEVID);
1728 priv->flags |= TSI721_IMSGID_SET;
1729 }
1730
1731 /*
1732 * Configure Inbound Messaging channel (ch = mbox + 4)
1733 */
1734
1735 /* Setup Inbound Message free queue */
1736 iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32),
1737 priv->regs + TSI721_IBDMAC_FQBH(ch));
1738 iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys &
1739 TSI721_IBDMAC_FQBL_MASK),
1740 priv->regs+TSI721_IBDMAC_FQBL(ch));
1741 iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
1742 priv->regs + TSI721_IBDMAC_FQSZ(ch));
1743
1744 /* Setup Inbound Message descriptor queue */
1745 iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32),
1746 priv->regs + TSI721_IBDMAC_DQBH(ch));
1747 iowrite32(((u32)priv->imsg_ring[mbox].imd_phys &
1748 (u32)TSI721_IBDMAC_DQBL_MASK),
1749 priv->regs+TSI721_IBDMAC_DQBL(ch));
1750 iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
1751 priv->regs + TSI721_IBDMAC_DQSZ(ch));
1752
1753 /* Enable interrupts */
1754
1755#ifdef CONFIG_PCI_MSI
1756 if (priv->flags & TSI721_USING_MSIX) {
1757 /* Request interrupt service if we are in MSI-X mode */
1758 rc = request_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
1759 tsi721_imsg_msix, 0,
1760 priv->msix[TSI721_VECT_IMB0_RCV + mbox].irq_name,
1761 (void *)mport);
1762
1763 if (rc) {
1764 dev_dbg(&priv->pdev->dev,
1765 "Unable to allocate MSI-X interrupt for "
1766 "IBOX%d-DONE\n", mbox);
1767 goto out_desc;
1768 }
1769
1770 rc = request_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
1771 tsi721_imsg_msix, 0,
1772 priv->msix[TSI721_VECT_IMB0_INT + mbox].irq_name,
1773 (void *)mport);
1774
1775 if (rc) {
1776 dev_dbg(&priv->pdev->dev,
1777 "Unable to allocate MSI-X interrupt for "
1778 "IBOX%d-INT\n", mbox);
1779 free_irq(
1780 priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
1781 (void *)mport);
1782 goto out_desc;
1783 }
1784 }
1785#endif /* CONFIG_PCI_MSI */
1786
1787 tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL);
1788
1789 /* Initialize Inbound Message Engine */
1790 iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch));
1791 ioread32(priv->regs + TSI721_IBDMAC_CTL(ch));
1792 udelay(10);
1793 priv->imsg_ring[mbox].fq_wrptr = entries - 1;
1794 iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch));
1795
1796 priv->imsg_init[mbox] = 1;
1797 return 0;
1798
1799#ifdef CONFIG_PCI_MSI
1800out_desc:
1801 dma_free_coherent(&priv->pdev->dev,
1802 priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
1803 priv->imsg_ring[mbox].imd_base,
1804 priv->imsg_ring[mbox].imd_phys);
1805
1806 priv->imsg_ring[mbox].imd_base = NULL;
1807#endif /* CONFIG_PCI_MSI */
1808
1809out_dma:
1810 dma_free_coherent(&priv->pdev->dev,
1811 priv->imsg_ring[mbox].size * 8,
1812 priv->imsg_ring[mbox].imfq_base,
1813 priv->imsg_ring[mbox].imfq_phys);
1814
1815 priv->imsg_ring[mbox].imfq_base = NULL;
1816
1817out_buf:
1818 dma_free_coherent(&priv->pdev->dev,
1819 priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
1820 priv->imsg_ring[mbox].buf_base,
1821 priv->imsg_ring[mbox].buf_phys);
1822
1823 priv->imsg_ring[mbox].buf_base = NULL;
1824
1825out:
1826 return rc;
1827}
1828
1829/**
1830 * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox
1831 * @mport: Master port implementing the Inbound Messaging Engine
1832 * @mbox: Mailbox to close
1833 */
1834static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox)
1835{
1836 struct tsi721_device *priv = mport->priv;
1837 u32 rx_slot;
1838 int ch = mbox + 4;
1839
1840 if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */
1841 return;
1842 priv->imsg_init[mbox] = 0;
1843
1844 /* Disable Inbound Messaging Engine */
1845
1846 /* Disable Interrupts */
1847 tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK);
1848
1849#ifdef CONFIG_PCI_MSI
1850 if (priv->flags & TSI721_USING_MSIX) {
1851 free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
1852 (void *)mport);
1853 free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
1854 (void *)mport);
1855 }
1856#endif /* CONFIG_PCI_MSI */
1857
1858 /* Clear Inbound Buffer Queue */
1859 for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++)
1860 priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
1861
1862 /* Free memory allocated for message buffers */
1863 dma_free_coherent(&priv->pdev->dev,
1864 priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
1865 priv->imsg_ring[mbox].buf_base,
1866 priv->imsg_ring[mbox].buf_phys);
1867
1868 priv->imsg_ring[mbox].buf_base = NULL;
1869
1870 /* Free memory allocated for free pointr list */
1871 dma_free_coherent(&priv->pdev->dev,
1872 priv->imsg_ring[mbox].size * 8,
1873 priv->imsg_ring[mbox].imfq_base,
1874 priv->imsg_ring[mbox].imfq_phys);
1875
1876 priv->imsg_ring[mbox].imfq_base = NULL;
1877
1878 /* Free memory allocated for RX descriptors */
1879 dma_free_coherent(&priv->pdev->dev,
1880 priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
1881 priv->imsg_ring[mbox].imd_base,
1882 priv->imsg_ring[mbox].imd_phys);
1883
1884 priv->imsg_ring[mbox].imd_base = NULL;
1885}
1886
1887/**
1888 * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue
1889 * @mport: Master port implementing the Inbound Messaging Engine
1890 * @mbox: Inbound mailbox number
1891 * @buf: Buffer to add to inbound queue
1892 */
1893static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
1894{
1895 struct tsi721_device *priv = mport->priv;
1896 u32 rx_slot;
1897 int rc = 0;
1898
1899 rx_slot = priv->imsg_ring[mbox].rx_slot;
1900 if (priv->imsg_ring[mbox].imq_base[rx_slot]) {
1901 dev_err(&priv->pdev->dev,
1902 "Error adding inbound buffer %d, buffer exists\n",
1903 rx_slot);
1904 rc = -EINVAL;
1905 goto out;
1906 }
1907
1908 priv->imsg_ring[mbox].imq_base[rx_slot] = buf;
1909
1910 if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size)
1911 priv->imsg_ring[mbox].rx_slot = 0;
1912
1913out:
1914 return rc;
1915}
1916
1917/**
1918 * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue
1919 * @mport: Master port implementing the Inbound Messaging Engine
1920 * @mbox: Inbound mailbox number
1921 *
1922 * Returns pointer to the message on success or NULL on failure.
1923 */
1924static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox)
1925{
1926 struct tsi721_device *priv = mport->priv;
1927 struct tsi721_imsg_desc *desc;
1928 u32 rx_slot;
1929 void *rx_virt = NULL;
1930 u64 rx_phys;
1931 void *buf = NULL;
1932 u64 *free_ptr;
1933 int ch = mbox + 4;
1934 int msg_size;
1935
1936 if (!priv->imsg_init[mbox])
1937 return NULL;
1938
1939 desc = priv->imsg_ring[mbox].imd_base;
1940 desc += priv->imsg_ring[mbox].desc_rdptr;
1941
1942 if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO))
1943 goto out;
1944
1945 rx_slot = priv->imsg_ring[mbox].rx_slot;
1946 while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) {
1947 if (++rx_slot == priv->imsg_ring[mbox].size)
1948 rx_slot = 0;
1949 }
1950
1951 rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) |
1952 le32_to_cpu(desc->bufptr_lo);
1953
1954 rx_virt = priv->imsg_ring[mbox].buf_base +
1955 (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys);
1956
1957 buf = priv->imsg_ring[mbox].imq_base[rx_slot];
1958 msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT;
1959 if (msg_size == 0)
1960 msg_size = RIO_MAX_MSG_SIZE;
1961
1962 memcpy(buf, rx_virt, msg_size);
1963 priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
1964
1965 desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO);
1966 if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size)
1967 priv->imsg_ring[mbox].desc_rdptr = 0;
1968
1969 iowrite32(priv->imsg_ring[mbox].desc_rdptr,
1970 priv->regs + TSI721_IBDMAC_DQRP(ch));
1971
1972 /* Return free buffer into the pointer list */
1973 free_ptr = priv->imsg_ring[mbox].imfq_base;
1974 free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys);
1975
1976 if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size)
1977 priv->imsg_ring[mbox].fq_wrptr = 0;
1978
1979 iowrite32(priv->imsg_ring[mbox].fq_wrptr,
1980 priv->regs + TSI721_IBDMAC_FQWP(ch));
1981out:
1982 return buf;
1983}
1984
1985/**
1986 * tsi721_messages_init - Initialization of Messaging Engine
1987 * @priv: pointer to tsi721 private data
1988 *
1989 * Configures Tsi721 messaging engine.
1990 */
1991static int tsi721_messages_init(struct tsi721_device *priv)
1992{
1993 int ch;
1994
1995 iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG);
1996 iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT);
1997 iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT);
1998
1999 /* Set SRIO Message Request/Response Timeout */
2000 iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO);
2001
2002 /* Initialize Inbound Messaging Engine Registers */
2003 for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) {
2004 /* Clear interrupt bits */
2005 iowrite32(TSI721_IBDMAC_INT_MASK,
2006 priv->regs + TSI721_IBDMAC_INT(ch));
2007 /* Clear Status */
2008 iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch));
2009
2010 iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK,
2011 priv->regs + TSI721_SMSG_ECC_COR_LOG(ch));
2012 iowrite32(TSI721_SMSG_ECC_NCOR_MASK,
2013 priv->regs + TSI721_SMSG_ECC_NCOR(ch));
2014 }
2015
2016 return 0;
2017}
2018
2019/**
2020 * tsi721_disable_ints - disables all device interrupts
2021 * @priv: pointer to tsi721 private data
2022 */
2023static void tsi721_disable_ints(struct tsi721_device *priv)
2024{
2025 int ch;
2026
2027 /* Disable all device level interrupts */
2028 iowrite32(0, priv->regs + TSI721_DEV_INTE);
2029
2030 /* Disable all Device Channel interrupts */
2031 iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE);
2032
2033 /* Disable all Inbound Msg Channel interrupts */
2034 for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++)
2035 iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch));
2036
2037 /* Disable all Outbound Msg Channel interrupts */
2038 for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++)
2039 iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch));
2040
2041 /* Disable all general messaging interrupts */
2042 iowrite32(0, priv->regs + TSI721_SMSG_INTE);
2043
2044 /* Disable all BDMA Channel interrupts */
2045 for (ch = 0; ch < TSI721_DMA_MAXCH; ch++)
2046 iowrite32(0, priv->regs + TSI721_DMAC_INTE(ch));
2047
2048 /* Disable all general BDMA interrupts */
2049 iowrite32(0, priv->regs + TSI721_BDMA_INTE);
2050
2051 /* Disable all SRIO Channel interrupts */
2052 for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++)
2053 iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch));
2054
2055 /* Disable all general SR2PC interrupts */
2056 iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE);
2057
2058 /* Disable all PC2SR interrupts */
2059 iowrite32(0, priv->regs + TSI721_PC2SR_INTE);
2060
2061 /* Disable all I2C interrupts */
2062 iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE);
2063
2064 /* Disable SRIO MAC interrupts */
2065 iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE);
2066 iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN);
2067}
2068
2069/**
2070 * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port
2071 * @priv: pointer to tsi721 private data
2072 *
2073 * Configures Tsi721 as RapidIO master port.
2074 */
2075static int __devinit tsi721_setup_mport(struct tsi721_device *priv)
2076{
2077 struct pci_dev *pdev = priv->pdev;
2078 int err = 0;
2079 struct rio_ops *ops;
2080
2081 struct rio_mport *mport;
2082
2083 ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
2084 if (!ops) {
2085 dev_dbg(&pdev->dev, "Unable to allocate memory for rio_ops\n");
2086 return -ENOMEM;
2087 }
2088
2089 ops->lcread = tsi721_lcread;
2090 ops->lcwrite = tsi721_lcwrite;
2091 ops->cread = tsi721_cread_dma;
2092 ops->cwrite = tsi721_cwrite_dma;
2093 ops->dsend = tsi721_dsend;
2094 ops->open_inb_mbox = tsi721_open_inb_mbox;
2095 ops->close_inb_mbox = tsi721_close_inb_mbox;
2096 ops->open_outb_mbox = tsi721_open_outb_mbox;
2097 ops->close_outb_mbox = tsi721_close_outb_mbox;
2098 ops->add_outb_message = tsi721_add_outb_message;
2099 ops->add_inb_buffer = tsi721_add_inb_buffer;
2100 ops->get_inb_message = tsi721_get_inb_message;
2101
2102 mport = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
2103 if (!mport) {
2104 kfree(ops);
2105 dev_dbg(&pdev->dev, "Unable to allocate memory for mport\n");
2106 return -ENOMEM;
2107 }
2108
2109 mport->ops = ops;
2110 mport->index = 0;
2111 mport->sys_size = 0; /* small system */
2112 mport->phy_type = RIO_PHY_SERIAL;
2113 mport->priv = (void *)priv;
2114 mport->phys_efptr = 0x100;
2115
2116 INIT_LIST_HEAD(&mport->dbells);
2117
2118 rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
2119 rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
2120 rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
2121 strcpy(mport->name, "Tsi721 mport");
2122
2123 /* Hook up interrupt handler */
2124
2125#ifdef CONFIG_PCI_MSI
2126 if (!tsi721_enable_msix(priv))
2127 priv->flags |= TSI721_USING_MSIX;
2128 else if (!pci_enable_msi(pdev))
2129 priv->flags |= TSI721_USING_MSI;
2130 else
2131 dev_info(&pdev->dev,
2132 "MSI/MSI-X is not available. Using legacy INTx.\n");
2133#endif /* CONFIG_PCI_MSI */
2134
2135 err = tsi721_request_irq(mport);
2136
2137 if (!err) {
2138 tsi721_interrupts_init(priv);
2139 ops->pwenable = tsi721_pw_enable;
2140 } else
2141 dev_err(&pdev->dev, "Unable to get assigned PCI IRQ "
2142 "vector %02X err=0x%x\n", pdev->irq, err);
2143
2144 /* Enable SRIO link */
2145 iowrite32(ioread32(priv->regs + TSI721_DEVCTL) |
2146 TSI721_DEVCTL_SRBOOT_CMPL,
2147 priv->regs + TSI721_DEVCTL);
2148
2149 rio_register_mport(mport);
2150 priv->mport = mport;
2151
2152 if (mport->host_deviceid >= 0)
2153 iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER |
2154 RIO_PORT_GEN_DISCOVERED,
2155 priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
2156 else
2157 iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
2158
2159 return 0;
2160}
2161
2162static int __devinit tsi721_probe(struct pci_dev *pdev,
2163 const struct pci_device_id *id)
2164{
2165 struct tsi721_device *priv;
2166 int i;
2167 int err;
2168 u32 regval;
2169
2170 priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL);
2171 if (priv == NULL) {
2172 dev_err(&pdev->dev, "Failed to allocate memory for device\n");
2173 err = -ENOMEM;
2174 goto err_exit;
2175 }
2176
2177 err = pci_enable_device(pdev);
2178 if (err) {
2179 dev_err(&pdev->dev, "Failed to enable PCI device\n");
2180 goto err_clean;
2181 }
2182
2183 priv->pdev = pdev;
2184
2185#ifdef DEBUG
2186 for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
2187 dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n",
2188 i, (unsigned long long)pci_resource_start(pdev, i),
2189 (unsigned long)pci_resource_len(pdev, i),
2190 pci_resource_flags(pdev, i));
2191 }
2192#endif
2193 /*
2194 * Verify BAR configuration
2195 */
2196
2197 /* BAR_0 (registers) must be 512KB+ in 32-bit address space */
2198 if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) ||
2199 pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 ||
2200 pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) {
2201 dev_err(&pdev->dev,
2202 "Missing or misconfigured CSR BAR0, aborting.\n");
2203 err = -ENODEV;
2204 goto err_disable_pdev;
2205 }
2206
2207 /* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */
2208 if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) ||
2209 pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 ||
2210 pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) {
2211 dev_err(&pdev->dev,
2212 "Missing or misconfigured Doorbell BAR1, aborting.\n");
2213 err = -ENODEV;
2214 goto err_disable_pdev;
2215 }
2216
2217 /*
2218 * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address
2219 * space.
2220 * NOTE: BAR_2 and BAR_4 are not used by this version of driver.
2221 * It may be a good idea to keep them disabled using HW configuration
2222 * to save PCI memory space.
2223 */
2224 if ((pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM) &&
2225 (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64)) {
2226 dev_info(&pdev->dev, "Outbound BAR2 is not used but enabled.\n");
2227 }
2228
2229 if ((pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM) &&
2230 (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64)) {
2231 dev_info(&pdev->dev, "Outbound BAR4 is not used but enabled.\n");
2232 }
2233
2234 err = pci_request_regions(pdev, DRV_NAME);
2235 if (err) {
2236 dev_err(&pdev->dev, "Cannot obtain PCI resources, "
2237 "aborting.\n");
2238 goto err_disable_pdev;
2239 }
2240
2241 pci_set_master(pdev);
2242
2243 priv->regs = pci_ioremap_bar(pdev, BAR_0);
2244 if (!priv->regs) {
2245 dev_err(&pdev->dev,
2246 "Unable to map device registers space, aborting\n");
2247 err = -ENOMEM;
2248 goto err_free_res;
2249 }
2250
2251 priv->odb_base = pci_ioremap_bar(pdev, BAR_1);
2252 if (!priv->odb_base) {
2253 dev_err(&pdev->dev,
2254 "Unable to map outbound doorbells space, aborting\n");
2255 err = -ENOMEM;
2256 goto err_unmap_bars;
2257 }
2258
2259 /* Configure DMA attributes. */
2260 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
2261 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
2262 dev_info(&pdev->dev, "Unable to set DMA mask\n");
2263 goto err_unmap_bars;
2264 }
2265
2266 if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
2267 dev_info(&pdev->dev, "Unable to set consistent DMA mask\n");
2268 } else {
2269 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
2270 if (err)
2271 dev_info(&pdev->dev, "Unable to set consistent DMA mask\n");
2272 }
2273
2274 /* Clear "no snoop" and "relaxed ordering" bits. */
2275 pci_read_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, &regval);
2276 regval &= ~(PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN);
2277 pci_write_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, regval);
2278
2279 /*
2280 * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block
2281 */
2282 pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01);
2283 pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL,
2284 TSI721_MSIXTBL_OFFSET);
2285 pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA,
2286 TSI721_MSIXPBA_OFFSET);
2287 pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0);
2288 /* End of FIXUP */
2289
2290 tsi721_disable_ints(priv);
2291
2292 tsi721_init_pc2sr_mapping(priv);
2293 tsi721_init_sr2pc_mapping(priv);
2294
2295 if (tsi721_bdma_init(priv)) {
2296 dev_err(&pdev->dev, "BDMA initialization failed, aborting\n");
2297 err = -ENOMEM;
2298 goto err_unmap_bars;
2299 }
2300
2301 err = tsi721_doorbell_init(priv);
2302 if (err)
2303 goto err_free_bdma;
2304
2305 tsi721_port_write_init(priv);
2306
2307 err = tsi721_messages_init(priv);
2308 if (err)
2309 goto err_free_consistent;
2310
2311 err = tsi721_setup_mport(priv);
2312 if (err)
2313 goto err_free_consistent;
2314
2315 return 0;
2316
2317err_free_consistent:
2318 tsi721_doorbell_free(priv);
2319err_free_bdma:
2320 tsi721_bdma_free(priv);
2321err_unmap_bars:
2322 if (priv->regs)
2323 iounmap(priv->regs);
2324 if (priv->odb_base)
2325 iounmap(priv->odb_base);
2326err_free_res:
2327 pci_release_regions(pdev);
2328 pci_clear_master(pdev);
2329err_disable_pdev:
2330 pci_disable_device(pdev);
2331err_clean:
2332 kfree(priv);
2333err_exit:
2334 return err;
2335}
2336
2337static DEFINE_PCI_DEVICE_TABLE(tsi721_pci_tbl) = {
2338 { PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) },
2339 { 0, } /* terminate list */
2340};
2341
2342MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl);
2343
2344static struct pci_driver tsi721_driver = {
2345 .name = "tsi721",
2346 .id_table = tsi721_pci_tbl,
2347 .probe = tsi721_probe,
2348};
2349
2350static int __init tsi721_init(void)
2351{
2352 return pci_register_driver(&tsi721_driver);
2353}
2354
2355static void __exit tsi721_exit(void)
2356{
2357 pci_unregister_driver(&tsi721_driver);
2358}
2359
2360device_initcall(tsi721_init);