| Steffen Trumtrar | 22dae17 | 2014-06-13 15:36:18 +0200 | [diff] [blame] | 1 | Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface. |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible : "snps,dw-apb-ssi" |
| 5 | - reg : The register base for the controller. |
| 6 | - interrupts : One interrupt, used by the controller. |
| 7 | - #address-cells : <1>, as required by generic SPI binding. |
| 8 | - #size-cells : <0>, also as required by generic SPI binding. |
| 9 | |
| 10 | Optional properties: |
| 11 | - cs-gpios : Specifies the gpio pis to be used for chipselects. |
| 12 | - num-cs : The number of chipselects. If omitted, this will default to 4. |
| Michael van der Westhuizen | 4b226fb | 2015-08-18 22:21:52 +0200 | [diff] [blame^] | 13 | - reg-io-width : The I/O register width (in bytes) implemented by this |
| 14 | device. Supported values are 2 or 4 (the default). |
| Steffen Trumtrar | 22dae17 | 2014-06-13 15:36:18 +0200 | [diff] [blame] | 15 | |
| 16 | Child nodes as per the generic SPI binding. |
| 17 | |
| 18 | Example: |
| 19 | |
| 20 | spi@fff00000 { |
| 21 | compatible = "snps,dw-apb-ssi"; |
| 22 | reg = <0xfff00000 0x1000>; |
| 23 | interrupts = <0 154 4>; |
| 24 | #address-cells = <1>; |
| 25 | #size-cells = <0>; |
| 26 | num-cs = <2>; |
| 27 | cs-gpios = <&gpio0 13 0>, |
| 28 | <&gpio0 14 0>; |
| 29 | }; |
| 30 | |