James Ban | f307a7e | 2015-11-19 09:59:15 +0900 | [diff] [blame] | 1 | /* |
| 2 | * pv88060-regulator.c - Regulator device driver for PV88060 |
| 3 | * Copyright (C) 2015 Powerventure Semiconductor Ltd. |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or |
| 6 | * modify it under the terms of the GNU General Public License |
| 7 | * as published by the Free Software Foundation; either version 2 |
| 8 | * of the License, or (at your option) any later version. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/err.h> |
| 17 | #include <linux/gpio.h> |
| 18 | #include <linux/i2c.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/init.h> |
| 21 | #include <linux/slab.h> |
| 22 | #include <linux/regulator/driver.h> |
| 23 | #include <linux/regulator/machine.h> |
| 24 | #include <linux/regmap.h> |
| 25 | #include <linux/irq.h> |
| 26 | #include <linux/interrupt.h> |
| 27 | #include <linux/regulator/of_regulator.h> |
| 28 | #include <linux/proc_fs.h> |
| 29 | #include <linux/uaccess.h> |
| 30 | #include "pv88060-regulator.h" |
| 31 | |
| 32 | #define PV88060_MAX_REGULATORS 14 |
| 33 | |
| 34 | /* PV88060 REGULATOR IDs */ |
| 35 | enum { |
| 36 | /* BUCKs */ |
| 37 | PV88060_ID_BUCK1, |
| 38 | |
| 39 | /* LDOs */ |
| 40 | PV88060_ID_LDO1, |
| 41 | PV88060_ID_LDO2, |
| 42 | PV88060_ID_LDO3, |
| 43 | PV88060_ID_LDO4, |
| 44 | PV88060_ID_LDO5, |
| 45 | PV88060_ID_LDO6, |
| 46 | PV88060_ID_LDO7, |
| 47 | |
| 48 | /* SWTs */ |
| 49 | PV88060_ID_SW1, |
| 50 | PV88060_ID_SW2, |
| 51 | PV88060_ID_SW3, |
| 52 | PV88060_ID_SW4, |
| 53 | PV88060_ID_SW5, |
| 54 | PV88060_ID_SW6, |
| 55 | }; |
| 56 | |
| 57 | struct pv88060_regulator { |
| 58 | struct regulator_desc desc; |
| 59 | /* Current limiting */ |
| 60 | unsigned n_current_limits; |
| 61 | const int *current_limits; |
| 62 | unsigned int limit_mask; |
| 63 | unsigned int conf; /* buck configuration register */ |
| 64 | }; |
| 65 | |
| 66 | struct pv88060 { |
| 67 | struct device *dev; |
| 68 | struct regmap *regmap; |
| 69 | struct regulator_dev *rdev[PV88060_MAX_REGULATORS]; |
| 70 | }; |
| 71 | |
| 72 | static const struct regmap_config pv88060_regmap_config = { |
| 73 | .reg_bits = 8, |
| 74 | .val_bits = 8, |
| 75 | }; |
| 76 | |
| 77 | /* Current limits array (in uA) for BUCK1 |
| 78 | * Entry indexes corresponds to register values. |
| 79 | */ |
| 80 | |
| 81 | static const int pv88060_buck1_limits[] = { |
| 82 | 1496000, 2393000, 3291000, 4189000 |
| 83 | }; |
| 84 | |
| 85 | static unsigned int pv88060_buck_get_mode(struct regulator_dev *rdev) |
| 86 | { |
| 87 | struct pv88060_regulator *info = rdev_get_drvdata(rdev); |
| 88 | unsigned int data; |
| 89 | int ret, mode = 0; |
| 90 | |
| 91 | ret = regmap_read(rdev->regmap, info->conf, &data); |
| 92 | if (ret < 0) |
| 93 | return ret; |
| 94 | |
| 95 | switch (data & PV88060_BUCK_MODE_MASK) { |
| 96 | case PV88060_BUCK_MODE_SYNC: |
| 97 | mode = REGULATOR_MODE_FAST; |
| 98 | break; |
| 99 | case PV88060_BUCK_MODE_AUTO: |
| 100 | mode = REGULATOR_MODE_NORMAL; |
| 101 | break; |
| 102 | case PV88060_BUCK_MODE_SLEEP: |
| 103 | mode = REGULATOR_MODE_STANDBY; |
| 104 | break; |
| 105 | } |
| 106 | |
| 107 | return mode; |
| 108 | } |
| 109 | |
| 110 | static int pv88060_buck_set_mode(struct regulator_dev *rdev, |
| 111 | unsigned int mode) |
| 112 | { |
| 113 | struct pv88060_regulator *info = rdev_get_drvdata(rdev); |
| 114 | int val = 0; |
| 115 | |
| 116 | switch (mode) { |
| 117 | case REGULATOR_MODE_FAST: |
| 118 | val = PV88060_BUCK_MODE_SYNC; |
| 119 | break; |
| 120 | case REGULATOR_MODE_NORMAL: |
| 121 | val = PV88060_BUCK_MODE_AUTO; |
| 122 | break; |
| 123 | case REGULATOR_MODE_STANDBY: |
| 124 | val = PV88060_BUCK_MODE_SLEEP; |
| 125 | break; |
| 126 | default: |
| 127 | return -EINVAL; |
| 128 | } |
| 129 | |
| 130 | return regmap_update_bits(rdev->regmap, info->conf, |
| 131 | PV88060_BUCK_MODE_MASK, val); |
| 132 | } |
| 133 | |
| 134 | static int pv88060_set_current_limit(struct regulator_dev *rdev, int min, |
| 135 | int max) |
| 136 | { |
| 137 | struct pv88060_regulator *info = rdev_get_drvdata(rdev); |
| 138 | int i; |
| 139 | |
| 140 | /* search for closest to maximum */ |
| 141 | for (i = info->n_current_limits; i >= 0; i--) { |
| 142 | if (min <= info->current_limits[i] |
| 143 | && max >= info->current_limits[i]) { |
| 144 | return regmap_update_bits(rdev->regmap, |
| 145 | info->conf, |
| 146 | info->limit_mask, |
| 147 | i << PV88060_BUCK_ILIM_SHIFT); |
| 148 | } |
| 149 | } |
| 150 | |
| 151 | return -EINVAL; |
| 152 | } |
| 153 | |
| 154 | static int pv88060_get_current_limit(struct regulator_dev *rdev) |
| 155 | { |
| 156 | struct pv88060_regulator *info = rdev_get_drvdata(rdev); |
| 157 | unsigned int data; |
| 158 | int ret; |
| 159 | |
| 160 | ret = regmap_read(rdev->regmap, info->conf, &data); |
| 161 | if (ret < 0) |
| 162 | return ret; |
| 163 | |
| 164 | data = (data & info->limit_mask) >> PV88060_BUCK_ILIM_SHIFT; |
| 165 | return info->current_limits[data]; |
| 166 | } |
| 167 | |
| 168 | static struct regulator_ops pv88060_buck_ops = { |
| 169 | .get_mode = pv88060_buck_get_mode, |
| 170 | .set_mode = pv88060_buck_set_mode, |
| 171 | .enable = regulator_enable_regmap, |
| 172 | .disable = regulator_disable_regmap, |
| 173 | .is_enabled = regulator_is_enabled_regmap, |
| 174 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 175 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 176 | .list_voltage = regulator_list_voltage_linear, |
| 177 | .set_current_limit = pv88060_set_current_limit, |
| 178 | .get_current_limit = pv88060_get_current_limit, |
| 179 | }; |
| 180 | |
| 181 | static struct regulator_ops pv88060_ldo_ops = { |
| 182 | .enable = regulator_enable_regmap, |
| 183 | .disable = regulator_disable_regmap, |
| 184 | .is_enabled = regulator_is_enabled_regmap, |
| 185 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 186 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 187 | .list_voltage = regulator_list_voltage_linear, |
| 188 | }; |
| 189 | |
| 190 | #define PV88060_BUCK(chip, regl_name, min, step, max, limits_array) \ |
| 191 | {\ |
| 192 | .desc = {\ |
| 193 | .id = chip##_ID_##regl_name,\ |
| 194 | .name = __stringify(chip##_##regl_name),\ |
| 195 | .of_match = of_match_ptr(#regl_name),\ |
| 196 | .regulators_node = of_match_ptr("regulators"),\ |
| 197 | .type = REGULATOR_VOLTAGE,\ |
| 198 | .owner = THIS_MODULE,\ |
| 199 | .ops = &pv88060_buck_ops,\ |
| 200 | .min_uV = min,\ |
| 201 | .uV_step = step,\ |
| 202 | .n_voltages = ((max) - (min))/(step) + 1,\ |
| 203 | .enable_reg = PV88060_REG_##regl_name##_CONF0,\ |
| 204 | .enable_mask = PV88060_BUCK_EN, \ |
| 205 | .vsel_reg = PV88060_REG_##regl_name##_CONF0,\ |
| 206 | .vsel_mask = PV88060_VBUCK_MASK,\ |
| 207 | },\ |
| 208 | .current_limits = limits_array,\ |
| 209 | .n_current_limits = ARRAY_SIZE(limits_array),\ |
| 210 | .limit_mask = PV88060_BUCK_ILIM_MASK, \ |
| 211 | .conf = PV88060_REG_##regl_name##_CONF1,\ |
| 212 | } |
| 213 | |
| 214 | #define PV88060_LDO(chip, regl_name, min, step, max) \ |
| 215 | {\ |
| 216 | .desc = {\ |
| 217 | .id = chip##_ID_##regl_name,\ |
| 218 | .name = __stringify(chip##_##regl_name),\ |
| 219 | .of_match = of_match_ptr(#regl_name),\ |
| 220 | .regulators_node = of_match_ptr("regulators"),\ |
| 221 | .type = REGULATOR_VOLTAGE,\ |
| 222 | .owner = THIS_MODULE,\ |
| 223 | .ops = &pv88060_ldo_ops,\ |
| 224 | .min_uV = min, \ |
| 225 | .uV_step = step, \ |
| 226 | .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ |
| 227 | .enable_reg = PV88060_REG_##regl_name##_CONF, \ |
| 228 | .enable_mask = PV88060_LDO_EN, \ |
| 229 | .vsel_reg = PV88060_REG_##regl_name##_CONF, \ |
| 230 | .vsel_mask = PV88060_VLDO_MASK, \ |
| 231 | },\ |
| 232 | } |
| 233 | |
| 234 | #define PV88060_SW(chip, regl_name, max) \ |
| 235 | {\ |
| 236 | .desc = {\ |
| 237 | .id = chip##_ID_##regl_name,\ |
| 238 | .name = __stringify(chip##_##regl_name),\ |
| 239 | .of_match = of_match_ptr(#regl_name),\ |
| 240 | .regulators_node = of_match_ptr("regulators"),\ |
| 241 | .type = REGULATOR_VOLTAGE,\ |
| 242 | .owner = THIS_MODULE,\ |
| 243 | .ops = &pv88060_ldo_ops,\ |
| 244 | .min_uV = max,\ |
| 245 | .uV_step = 0,\ |
| 246 | .n_voltages = 1,\ |
| 247 | .enable_reg = PV88060_REG_##regl_name##_CONF,\ |
| 248 | .enable_mask = PV88060_SW_EN,\ |
| 249 | },\ |
| 250 | } |
| 251 | |
| 252 | static const struct pv88060_regulator pv88060_regulator_info[] = { |
| 253 | PV88060_BUCK(PV88060, BUCK1, 2800000, 12500, 4387500, |
| 254 | pv88060_buck1_limits), |
| 255 | PV88060_LDO(PV88060, LDO1, 1200000, 50000, 3350000), |
| 256 | PV88060_LDO(PV88060, LDO2, 1200000, 50000, 3350000), |
| 257 | PV88060_LDO(PV88060, LDO3, 1200000, 50000, 3350000), |
| 258 | PV88060_LDO(PV88060, LDO4, 1200000, 50000, 3350000), |
| 259 | PV88060_LDO(PV88060, LDO5, 1200000, 50000, 3350000), |
| 260 | PV88060_LDO(PV88060, LDO6, 1200000, 50000, 3350000), |
| 261 | PV88060_LDO(PV88060, LDO7, 1200000, 50000, 3350000), |
| 262 | PV88060_SW(PV88060, SW1, 5000000), |
| 263 | PV88060_SW(PV88060, SW2, 5000000), |
| 264 | PV88060_SW(PV88060, SW3, 5000000), |
| 265 | PV88060_SW(PV88060, SW4, 5000000), |
| 266 | PV88060_SW(PV88060, SW5, 5000000), |
| 267 | PV88060_SW(PV88060, SW6, 5000000), |
| 268 | }; |
| 269 | |
| 270 | static irqreturn_t pv88060_irq_handler(int irq, void *data) |
| 271 | { |
| 272 | struct pv88060 *chip = data; |
| 273 | int i, reg_val, err, ret = IRQ_NONE; |
| 274 | |
| 275 | err = regmap_read(chip->regmap, PV88060_REG_EVENT_A, ®_val); |
| 276 | if (err < 0) |
| 277 | goto error_i2c; |
| 278 | |
| 279 | if (reg_val & PV88060_E_VDD_FLT) { |
| 280 | for (i = 0; i < PV88060_MAX_REGULATORS; i++) { |
| 281 | if (chip->rdev[i] != NULL) { |
| 282 | regulator_notifier_call_chain(chip->rdev[i], |
| 283 | REGULATOR_EVENT_UNDER_VOLTAGE, |
| 284 | NULL); |
| 285 | } |
| 286 | } |
| 287 | |
James Ban | a7c2ded | 2016-03-08 11:37:03 +0900 | [diff] [blame] | 288 | err = regmap_write(chip->regmap, PV88060_REG_EVENT_A, |
| 289 | PV88060_E_VDD_FLT); |
James Ban | f307a7e | 2015-11-19 09:59:15 +0900 | [diff] [blame] | 290 | if (err < 0) |
| 291 | goto error_i2c; |
| 292 | |
| 293 | ret = IRQ_HANDLED; |
| 294 | } |
| 295 | |
| 296 | if (reg_val & PV88060_E_OVER_TEMP) { |
| 297 | for (i = 0; i < PV88060_MAX_REGULATORS; i++) { |
| 298 | if (chip->rdev[i] != NULL) { |
| 299 | regulator_notifier_call_chain(chip->rdev[i], |
| 300 | REGULATOR_EVENT_OVER_TEMP, |
| 301 | NULL); |
| 302 | } |
| 303 | } |
| 304 | |
James Ban | a7c2ded | 2016-03-08 11:37:03 +0900 | [diff] [blame] | 305 | err = regmap_write(chip->regmap, PV88060_REG_EVENT_A, |
| 306 | PV88060_E_OVER_TEMP); |
James Ban | f307a7e | 2015-11-19 09:59:15 +0900 | [diff] [blame] | 307 | if (err < 0) |
| 308 | goto error_i2c; |
| 309 | |
| 310 | ret = IRQ_HANDLED; |
| 311 | } |
| 312 | |
| 313 | return ret; |
| 314 | |
| 315 | error_i2c: |
| 316 | dev_err(chip->dev, "I2C error : %d\n", err); |
| 317 | return IRQ_NONE; |
| 318 | } |
| 319 | |
| 320 | /* |
| 321 | * I2C driver interface functions |
| 322 | */ |
| 323 | static int pv88060_i2c_probe(struct i2c_client *i2c, |
| 324 | const struct i2c_device_id *id) |
| 325 | { |
| 326 | struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev); |
| 327 | struct pv88060 *chip; |
| 328 | struct regulator_config config = { }; |
| 329 | int error, i, ret = 0; |
| 330 | |
| 331 | chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88060), GFP_KERNEL); |
| 332 | if (!chip) |
| 333 | return -ENOMEM; |
| 334 | |
| 335 | chip->dev = &i2c->dev; |
| 336 | chip->regmap = devm_regmap_init_i2c(i2c, &pv88060_regmap_config); |
| 337 | if (IS_ERR(chip->regmap)) { |
| 338 | error = PTR_ERR(chip->regmap); |
| 339 | dev_err(chip->dev, "Failed to allocate register map: %d\n", |
| 340 | error); |
| 341 | return error; |
| 342 | } |
| 343 | |
| 344 | i2c_set_clientdata(i2c, chip); |
| 345 | |
| 346 | if (i2c->irq != 0) { |
| 347 | ret = regmap_write(chip->regmap, PV88060_REG_MASK_A, 0xFF); |
| 348 | if (ret < 0) { |
| 349 | dev_err(chip->dev, |
| 350 | "Failed to mask A reg: %d\n", ret); |
| 351 | return ret; |
| 352 | } |
| 353 | |
Dan Carpenter | 3c0a2f6 | 2015-12-01 11:29:12 +0300 | [diff] [blame] | 354 | ret = regmap_write(chip->regmap, PV88060_REG_MASK_B, 0xFF); |
James Ban | f307a7e | 2015-11-19 09:59:15 +0900 | [diff] [blame] | 355 | if (ret < 0) { |
| 356 | dev_err(chip->dev, |
| 357 | "Failed to mask B reg: %d\n", ret); |
| 358 | return ret; |
| 359 | } |
| 360 | |
Dan Carpenter | 3c0a2f6 | 2015-12-01 11:29:12 +0300 | [diff] [blame] | 361 | ret = regmap_write(chip->regmap, PV88060_REG_MASK_C, 0xFF); |
James Ban | f307a7e | 2015-11-19 09:59:15 +0900 | [diff] [blame] | 362 | if (ret < 0) { |
| 363 | dev_err(chip->dev, |
| 364 | "Failed to mask C reg: %d\n", ret); |
| 365 | return ret; |
| 366 | } |
| 367 | |
Axel Lin | 8846794 | 2015-11-25 12:34:07 +0800 | [diff] [blame] | 368 | ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, |
James Ban | f307a7e | 2015-11-19 09:59:15 +0900 | [diff] [blame] | 369 | pv88060_irq_handler, |
| 370 | IRQF_TRIGGER_LOW|IRQF_ONESHOT, |
| 371 | "pv88060", chip); |
| 372 | if (ret != 0) { |
| 373 | dev_err(chip->dev, "Failed to request IRQ: %d\n", |
| 374 | i2c->irq); |
| 375 | return ret; |
| 376 | } |
| 377 | |
| 378 | ret = regmap_update_bits(chip->regmap, PV88060_REG_MASK_A, |
| 379 | PV88060_M_VDD_FLT | PV88060_M_OVER_TEMP, 0); |
| 380 | if (ret < 0) { |
| 381 | dev_err(chip->dev, |
| 382 | "Failed to update mask reg: %d\n", ret); |
| 383 | return ret; |
| 384 | } |
| 385 | |
| 386 | } else { |
| 387 | dev_warn(chip->dev, "No IRQ configured\n"); |
| 388 | } |
| 389 | |
| 390 | config.dev = chip->dev; |
| 391 | config.regmap = chip->regmap; |
| 392 | |
| 393 | for (i = 0; i < PV88060_MAX_REGULATORS; i++) { |
| 394 | if (init_data) |
| 395 | config.init_data = &init_data[i]; |
| 396 | |
| 397 | config.driver_data = (void *)&pv88060_regulator_info[i]; |
| 398 | chip->rdev[i] = devm_regulator_register(chip->dev, |
| 399 | &pv88060_regulator_info[i].desc, &config); |
| 400 | if (IS_ERR(chip->rdev[i])) { |
| 401 | dev_err(chip->dev, |
| 402 | "Failed to register PV88060 regulator\n"); |
| 403 | return PTR_ERR(chip->rdev[i]); |
| 404 | } |
| 405 | } |
| 406 | |
| 407 | return 0; |
| 408 | } |
| 409 | |
| 410 | static const struct i2c_device_id pv88060_i2c_id[] = { |
| 411 | {"pv88060", 0}, |
| 412 | {}, |
| 413 | }; |
| 414 | MODULE_DEVICE_TABLE(i2c, pv88060_i2c_id); |
| 415 | |
| 416 | #ifdef CONFIG_OF |
| 417 | static const struct of_device_id pv88060_dt_ids[] = { |
| 418 | { .compatible = "pvs,pv88060", .data = &pv88060_i2c_id[0] }, |
| 419 | {}, |
| 420 | }; |
| 421 | MODULE_DEVICE_TABLE(of, pv88060_dt_ids); |
| 422 | #endif |
| 423 | |
| 424 | static struct i2c_driver pv88060_regulator_driver = { |
| 425 | .driver = { |
| 426 | .name = "pv88060", |
| 427 | .of_match_table = of_match_ptr(pv88060_dt_ids), |
| 428 | }, |
| 429 | .probe = pv88060_i2c_probe, |
| 430 | .id_table = pv88060_i2c_id, |
| 431 | }; |
| 432 | |
| 433 | module_i2c_driver(pv88060_regulator_driver); |
| 434 | |
| 435 | MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>"); |
| 436 | MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88060"); |
| 437 | MODULE_LICENSE("GPL"); |