blob: d595c15166a42754944109c8ea47b8b454039142 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/include/asm-arm/floppy.h
3 *
4 * Copyright (C) 1996-2000 Russell King
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
11 */
12#ifndef __ASM_ARM_FLOPPY_H
13#define __ASM_ARM_FLOPPY_H
14#if 0
15#include <asm/arch/floppy.h>
16#endif
17
18#define fd_outb(val,port) \
19 do { \
20 if ((port) == FD_DOR) \
21 fd_setdor((val)); \
22 else \
23 outb((val),(port)); \
24 } while(0)
25
26#define fd_inb(port) inb((port))
27#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
Thomas Gleixner52e405e2006-07-03 02:20:05 +020028 IRQF_DISABLED,"floppy",NULL)
Linus Torvalds1da177e2005-04-16 15:20:36 -070029#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL)
30#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK)
31#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK)
32
Russell King21d1ca02007-07-15 14:52:16 +010033static inline int fd_dma_setup(void *data, unsigned int length,
34 unsigned int mode, unsigned long addr)
35{
36 set_dma_mode(DMA_FLOPPY, mode);
37 __set_dma_addr(DMA_FLOPPY, data);
38 set_dma_count(DMA_FLOPPY, length);
39 virtual_dma_port = addr;
40 enable_dma(DMA_FLOPPY);
41 return 0;
42}
43#define fd_dma_setup fd_dma_setup
44
Linus Torvalds1da177e2005-04-16 15:20:36 -070045#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy")
46#define fd_free_dma() free_dma(DMA_FLOPPY)
47#define fd_disable_dma() disable_dma(DMA_FLOPPY)
Linus Torvalds1da177e2005-04-16 15:20:36 -070048
49/* need to clean up dma.h */
50#define DMA_FLOPPYDISK DMA_FLOPPY
51
52/* Floppy_selects is the list of DOR's to select drive fd
53 *
54 * On initialisation, the floppy list is scanned, and the drives allocated
55 * in the order that they are found. This is done by seeking the drive
56 * to a non-zero track, and then restoring it to track 0. If an error occurs,
57 * then there is no floppy drive present. [to be put back in again]
58 */
59static unsigned char floppy_selects[2][4] =
60{
61 { 0x10, 0x21, 0x23, 0x33 },
62 { 0x10, 0x21, 0x23, 0x33 }
63};
64
65#define fd_setdor(dor) \
66do { \
67 int new_dor = (dor); \
68 if (new_dor & 0xf0) \
69 new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \
70 else \
71 new_dor &= 0x0c; \
72 outb(new_dor, FD_DOR); \
73} while (0)
74
75/*
76 * Someday, we'll automatically detect which drives are present...
77 */
78static inline void fd_scandrives (void)
79{
80#if 0
81 int floppy, drive_count;
82
83 fd_disable_irq();
84 raw_cmd = &default_raw_cmd;
85 raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
86 raw_cmd->track = 0;
87 raw_cmd->rate = ?;
88 drive_count = 0;
89 for (floppy = 0; floppy < 4; floppy ++) {
90 current_drive = drive_count;
91 /*
92 * Turn on floppy motor
93 */
94 if (start_motor(redo_fd_request))
95 continue;
96 /*
97 * Set up FDC
98 */
99 fdc_specify();
100 /*
101 * Tell FDC to recalibrate
102 */
103 output_byte(FD_RECALIBRATE);
104 LAST_OUT(UNIT(floppy));
105 /* wait for command to complete */
106 if (!successful) {
107 int i;
108 for (i = drive_count; i < 3; i--)
109 floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
110 floppy_selects[fdc][3] = 0;
111 floppy -= 1;
112 } else
113 drive_count++;
114 }
115#else
116 floppy_selects[0][0] = 0x10;
117 floppy_selects[0][1] = 0x21;
118 floppy_selects[0][2] = 0x23;
119 floppy_selects[0][3] = 0x33;
120#endif
121}
122
123#define FDC1 (0x3f0)
124
125#define FLOPPY0_TYPE 4
126#define FLOPPY1_TYPE 4
127
128#define N_FDC 1
129#define N_DRIVE 4
130
131#define FLOPPY_MOTOR_MASK 0xf0
132
133#define CROSS_64KB(a,s) (0)
134
135/*
136 * This allows people to reverse the order of
137 * fd0 and fd1, in case their hardware is
138 * strangely connected (as some RiscPCs
139 * and A5000s seem to be).
140 */
141static void driveswap(int *ints, int dummy, int dummy2)
142{
143 floppy_selects[0][0] ^= floppy_selects[0][1];
144 floppy_selects[0][1] ^= floppy_selects[0][0];
145 floppy_selects[0][0] ^= floppy_selects[0][1];
146}
147
148#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
149
150#endif