blob: 1bfe0fcaccf5ba31bf125f898ec6c624f506206e [file] [log] [blame]
David Brownell090ffa92005-08-31 09:54:50 -07001/*
2 * PL-2301/2302 USB host-to-host link cables
3 * Copyright (C) 2000-2005 by David Brownell
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
Jeff Kirsher9cb00072013-12-06 06:28:46 -080016 * along with this program; if not, see <http://www.gnu.org/licenses/>.
David Brownell090ffa92005-08-31 09:54:50 -070017 */
18
19// #define DEBUG // error path messages, extra info
20// #define VERBOSE // more; success messages
21
David Brownell090ffa92005-08-31 09:54:50 -070022#include <linux/module.h>
David Brownell090ffa92005-08-31 09:54:50 -070023#include <linux/netdevice.h>
24#include <linux/etherdevice.h>
25#include <linux/ethtool.h>
26#include <linux/workqueue.h>
27#include <linux/mii.h>
28#include <linux/usb.h>
Jussi Kivilinna3692e942008-01-26 00:51:45 +020029#include <linux/usb/usbnet.h>
David Brownell090ffa92005-08-31 09:54:50 -070030
31
32/*
Justin P. Mattock631dd1a2010-10-18 11:03:14 +020033 * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/
David Brownell090ffa92005-08-31 09:54:50 -070034 *
35 * The protocol and handshaking used here should be bug-compatible
36 * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
37 *
38 * HEADS UP: this handshaking isn't all that robust. This driver
39 * gets confused easily if you unplug one end of the cable then
40 * try to connect it again; you'll need to restart both ends. The
41 * "naplink" software (used by some PlayStation/2 deveopers) does
42 * the handshaking much better! Also, sometimes this hardware
43 * seems to get wedged under load. Prolific docs are weak, and
44 * don't identify differences between PL2301 and PL2302, much less
45 * anything to explain the different PL2302 versions observed.
simon647da402011-04-06 21:40:14 +000046 *
47 * NOTE: pl2501 has several modes, including pl2301 and pl2302
48 * compatibility. Some docs suggest the difference between 2301
49 * and 2302 is only to make MS-Windows use a different driver...
50 *
51 * pl25a1 glue based on patch from Tony Gibbs. Prolific "docs" on
52 * this chip are as usual incomplete about what control messages
53 * are supported.
David Brownell090ffa92005-08-31 09:54:50 -070054 */
55
56/*
57 * Bits 0-4 can be used for software handshaking; they're set from
58 * one end, cleared from the other, "read" with the interrupt byte.
59 */
60#define PL_S_EN (1<<7) /* (feature only) suspend enable */
61/* reserved bit -- rx ready (6) ? */
62#define PL_TX_READY (1<<5) /* (interrupt only) transmit ready */
63#define PL_RESET_OUT (1<<4) /* reset output pipe */
64#define PL_RESET_IN (1<<3) /* reset input pipe */
65#define PL_TX_C (1<<2) /* transmission complete */
66#define PL_TX_REQ (1<<1) /* transmission received */
67#define PL_PEER_E (1<<0) /* peer exists */
68
69static inline int
70pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
71{
Ming Lei7cdd2482012-10-24 19:47:01 +000072 return usbnet_read_cmd(dev, req,
73 USB_DIR_IN | USB_TYPE_VENDOR |
74 USB_RECIP_DEVICE,
75 val, index, NULL, 0);
David Brownell090ffa92005-08-31 09:54:50 -070076}
77
78static inline int
79pl_clear_QuickLink_features(struct usbnet *dev, int val)
80{
81 return pl_vendor_req(dev, 1, (u8) val, 0);
82}
83
84static inline int
85pl_set_QuickLink_features(struct usbnet *dev, int val)
86{
87 return pl_vendor_req(dev, 3, (u8) val, 0);
88}
89
90static int pl_reset(struct usbnet *dev)
91{
simon5325e922011-04-06 21:40:15 +000092 int status;
93
David Brownell090ffa92005-08-31 09:54:50 -070094 /* some units seem to need this reset, others reject it utterly.
95 * FIXME be more like "naplink" or windows drivers.
96 */
simon5325e922011-04-06 21:40:15 +000097 status = pl_set_QuickLink_features(dev,
David Brownell090ffa92005-08-31 09:54:50 -070098 PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
simon5325e922011-04-06 21:40:15 +000099 if (status != 0 && netif_msg_probe(dev))
100 netif_dbg(dev, link, dev->net, "pl_reset --> %d\n", status);
David Brownell090ffa92005-08-31 09:54:50 -0700101 return 0;
102}
103
104static const struct driver_info prolific_info = {
simon647da402011-04-06 21:40:14 +0000105 .description = "Prolific PL-2301/PL-2302/PL-25A1",
Arnd Bergmannc2613442011-04-01 20:12:02 -0700106 .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT,
David Brownell090ffa92005-08-31 09:54:50 -0700107 /* some PL-2302 versions seem to fail usb_set_interface() */
108 .reset = pl_reset,
109};
110
111
112/*-------------------------------------------------------------------------*/
113
114/*
115 * Proilific's name won't normally be on the cables, and
116 * may not be on the device.
117 */
118
119static const struct usb_device_id products [] = {
120
simon647da402011-04-06 21:40:14 +0000121/* full speed cables */
David Brownell090ffa92005-08-31 09:54:50 -0700122{
123 USB_DEVICE(0x067b, 0x0000), // PL-2301
124 .driver_info = (unsigned long) &prolific_info,
125}, {
126 USB_DEVICE(0x067b, 0x0001), // PL-2302
127 .driver_info = (unsigned long) &prolific_info,
128},
129
simon647da402011-04-06 21:40:14 +0000130/* high speed cables */
131{
132 USB_DEVICE(0x067b, 0x25a1), /* PL-25A1, no eeprom */
133 .driver_info = (unsigned long) &prolific_info,
134}, {
135 USB_DEVICE(0x050d, 0x258a), /* Belkin F5U258/F5U279 (PL-25A1) */
136 .driver_info = (unsigned long) &prolific_info,
Ben Shelton42c972a2015-02-16 13:47:06 -0600137}, {
138 USB_DEVICE(0x3923, 0x7825), /* National Instruments USB
139 * Host-to-Host Cable
140 */
141 .driver_info = (unsigned long) &prolific_info,
simon647da402011-04-06 21:40:14 +0000142},
143
David Brownell090ffa92005-08-31 09:54:50 -0700144 { }, // END
145};
146MODULE_DEVICE_TABLE(usb, products);
147
148static struct usb_driver plusb_driver = {
David Brownell090ffa92005-08-31 09:54:50 -0700149 .name = "plusb",
150 .id_table = products,
151 .probe = usbnet_probe,
152 .disconnect = usbnet_disconnect,
153 .suspend = usbnet_suspend,
154 .resume = usbnet_resume,
Sarah Sharpe1f12eb2012-04-23 10:08:51 -0700155 .disable_hub_initiated_lpm = 1,
David Brownell090ffa92005-08-31 09:54:50 -0700156};
157
Greg Kroah-Hartmand632eb12011-11-18 09:44:20 -0800158module_usb_driver(plusb_driver);
David Brownell090ffa92005-08-31 09:54:50 -0700159
160MODULE_AUTHOR("David Brownell");
simon647da402011-04-06 21:40:14 +0000161MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1 USB Host to Host Link Driver");
David Brownell090ffa92005-08-31 09:54:50 -0700162MODULE_LICENSE("GPL");