blob: 54cf4ae60d297f9471459a3b212dd15b3f87b73e [file] [log] [blame]
Yuvaraj Kumar C Dbcff4cb2014-03-03 10:52:39 +05301/*
2 * Samsung SATA SerDes(PHY) driver
3 *
4 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
5 * Authors: Girish K S <ks.giri@samsung.com>
6 * Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13#include <linux/clk.h>
14#include <linux/delay.h>
15#include <linux/io.h>
16#include <linux/i2c.h>
17#include <linux/kernel.h>
18#include <linux/module.h>
19#include <linux/of.h>
20#include <linux/of_address.h>
21#include <linux/phy/phy.h>
22#include <linux/platform_device.h>
23#include <linux/regmap.h>
24#include <linux/spinlock.h>
25#include <linux/mfd/syscon.h>
26
27#define SATAPHY_CONTROL_OFFSET 0x0724
28#define EXYNOS5_SATAPHY_PMU_ENABLE BIT(0)
29#define EXYNOS5_SATA_RESET 0x4
30#define RESET_GLOBAL_RST_N BIT(0)
31#define RESET_CMN_RST_N BIT(1)
32#define RESET_CMN_BLOCK_RST_N BIT(2)
33#define RESET_CMN_I2C_RST_N BIT(3)
34#define RESET_TX_RX_PIPE_RST_N BIT(4)
35#define RESET_TX_RX_BLOCK_RST_N BIT(5)
36#define RESET_TX_RX_I2C_RST_N (BIT(6) | BIT(7))
37#define LINK_RESET 0xf0000
38#define EXYNOS5_SATA_MODE0 0x10
39#define SATA_SPD_GEN3 BIT(1)
40#define EXYNOS5_SATA_CTRL0 0x14
41#define CTRL0_P0_PHY_CALIBRATED_SEL BIT(9)
42#define CTRL0_P0_PHY_CALIBRATED BIT(8)
43#define EXYNOS5_SATA_PHSATA_CTRLM 0xe0
44#define PHCTRLM_REF_RATE BIT(1)
45#define PHCTRLM_HIGH_SPEED BIT(0)
46#define EXYNOS5_SATA_PHSATA_STATM 0xf0
47#define PHSTATM_PLL_LOCKED BIT(0)
48
49#define PHY_PLL_TIMEOUT (usecs_to_jiffies(1000))
50
51struct exynos_sata_phy {
52 struct phy *phy;
53 struct clk *phyclk;
54 void __iomem *regs;
55 struct regmap *pmureg;
56 struct i2c_client *client;
57};
58
59static int wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit,
60 u32 status)
61{
62 unsigned long timeout = jiffies + PHY_PLL_TIMEOUT;
63
64 while (time_before(jiffies, timeout)) {
65 if ((readl(base + reg) & checkbit) == status)
66 return 0;
67 }
68
69 return -EFAULT;
70}
71
72static int exynos_sata_phy_power_on(struct phy *phy)
73{
74 struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
75
76 return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
77 EXYNOS5_SATAPHY_PMU_ENABLE, true);
78
79}
80
81static int exynos_sata_phy_power_off(struct phy *phy)
82{
83 struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
84
85 return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
86 EXYNOS5_SATAPHY_PMU_ENABLE, false);
87
88}
89
90static int exynos_sata_phy_init(struct phy *phy)
91{
92 u32 val = 0;
93 int ret = 0;
94 u8 buf[] = { 0x3a, 0x0b };
95 struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
96
97 ret = regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
98 EXYNOS5_SATAPHY_PMU_ENABLE, true);
99 if (ret != 0)
100 dev_err(&sata_phy->phy->dev, "phy init failed\n");
101
102 writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
103
104 val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
105 val |= RESET_GLOBAL_RST_N | RESET_CMN_RST_N | RESET_CMN_BLOCK_RST_N
106 | RESET_CMN_I2C_RST_N | RESET_TX_RX_PIPE_RST_N
107 | RESET_TX_RX_BLOCK_RST_N | RESET_TX_RX_I2C_RST_N;
108 writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
109
110 val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
111 val |= LINK_RESET;
112 writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
113
114 val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
115 val |= RESET_CMN_RST_N;
116 writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
117
118 val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
119 val &= ~PHCTRLM_REF_RATE;
120 writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
121
122 /* High speed enable for Gen3 */
123 val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
124 val |= PHCTRLM_HIGH_SPEED;
125 writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
126
127 val = readl(sata_phy->regs + EXYNOS5_SATA_CTRL0);
128 val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED;
129 writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0);
130
131 val = readl(sata_phy->regs + EXYNOS5_SATA_MODE0);
132 val |= SATA_SPD_GEN3;
133 writel(val, sata_phy->regs + EXYNOS5_SATA_MODE0);
134
135 ret = i2c_master_send(sata_phy->client, buf, sizeof(buf));
136 if (ret < 0)
137 return ret;
138
139 /* release cmu reset */
140 val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
141 val &= ~RESET_CMN_RST_N;
142 writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
143
144 val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
145 val |= RESET_CMN_RST_N;
146 writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
147
148 ret = wait_for_reg_status(sata_phy->regs,
149 EXYNOS5_SATA_PHSATA_STATM,
150 PHSTATM_PLL_LOCKED, 1);
151 if (ret < 0)
152 dev_err(&sata_phy->phy->dev,
153 "PHY PLL locking failed\n");
154 return ret;
155}
156
157static struct phy_ops exynos_sata_phy_ops = {
158 .init = exynos_sata_phy_init,
159 .power_on = exynos_sata_phy_power_on,
160 .power_off = exynos_sata_phy_power_off,
161 .owner = THIS_MODULE,
162};
163
164static int exynos_sata_phy_probe(struct platform_device *pdev)
165{
166 struct exynos_sata_phy *sata_phy;
167 struct device *dev = &pdev->dev;
168 struct resource *res;
169 struct phy_provider *phy_provider;
170 struct device_node *node;
171 int ret = 0;
172
173 sata_phy = devm_kzalloc(dev, sizeof(*sata_phy), GFP_KERNEL);
174 if (!sata_phy)
175 return -ENOMEM;
176
177 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
178
179 sata_phy->regs = devm_ioremap_resource(dev, res);
180 if (IS_ERR(sata_phy->regs))
181 return PTR_ERR(sata_phy->regs);
182
183 sata_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
184 "samsung,syscon-phandle");
185 if (IS_ERR(sata_phy->pmureg)) {
186 dev_err(dev, "syscon regmap lookup failed.\n");
187 return PTR_ERR(sata_phy->pmureg);
188 }
189
190 node = of_parse_phandle(dev->of_node,
191 "samsung,exynos-sataphy-i2c-phandle", 0);
192 if (!node)
193 return -EINVAL;
194
195 sata_phy->client = of_find_i2c_device_by_node(node);
196 if (!sata_phy->client)
197 return -EPROBE_DEFER;
198
199 dev_set_drvdata(dev, sata_phy);
200
201 sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl");
202 if (IS_ERR(sata_phy->phyclk)) {
203 dev_err(dev, "failed to get clk for PHY\n");
204 return PTR_ERR(sata_phy->phyclk);
205 }
206
207 ret = clk_prepare_enable(sata_phy->phyclk);
208 if (ret < 0) {
209 dev_err(dev, "failed to enable source clk\n");
210 return ret;
211 }
212
Kishon Vijay Abraham If0ed8172014-07-14 15:55:02 +0530213 sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops, NULL);
Yuvaraj Kumar C Dbcff4cb2014-03-03 10:52:39 +0530214 if (IS_ERR(sata_phy->phy)) {
215 clk_disable_unprepare(sata_phy->phyclk);
216 dev_err(dev, "failed to create PHY\n");
217 return PTR_ERR(sata_phy->phy);
218 }
219
220 phy_set_drvdata(sata_phy->phy, sata_phy);
221
222 phy_provider = devm_of_phy_provider_register(dev,
223 of_phy_simple_xlate);
224 if (IS_ERR(phy_provider)) {
225 clk_disable_unprepare(sata_phy->phyclk);
226 return PTR_ERR(phy_provider);
227 }
228
229 return 0;
230}
231
232static const struct of_device_id exynos_sata_phy_of_match[] = {
233 { .compatible = "samsung,exynos5250-sata-phy" },
234 { },
235};
236MODULE_DEVICE_TABLE(of, exynos_sata_phy_of_match);
237
238static struct platform_driver exynos_sata_phy_driver = {
239 .probe = exynos_sata_phy_probe,
240 .driver = {
241 .of_match_table = exynos_sata_phy_of_match,
242 .name = "samsung,sata-phy",
Yuvaraj Kumar C Dbcff4cb2014-03-03 10:52:39 +0530243 }
244};
245module_platform_driver(exynos_sata_phy_driver);
246
247MODULE_DESCRIPTION("Samsung SerDes PHY driver");
Arnd Bergmannfe04e422014-03-15 10:37:12 +0100248MODULE_LICENSE("GPL v2");
Yuvaraj Kumar C Dbcff4cb2014-03-03 10:52:39 +0530249MODULE_AUTHOR("Girish K S <ks.giri@samsung.com>");
250MODULE_AUTHOR("Yuvaraj C D <yuvaraj.cd@samsung.com>");