blob: a0a6830b5e6de3a486106689bdf2995d99fe03cb [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * de620.c $Revision: 1.40 $ BETA
3 *
4 *
5 * Linux driver for the D-Link DE-620 Ethernet pocket adapter.
6 *
7 * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall <bj0rn@blox.se>
8 *
9 * Based on adapter information gathered from DOS packetdriver
10 * sources from D-Link Inc: (Special thanks to Henry Ngai of D-Link.)
11 * Portions (C) Copyright D-Link SYSTEM Inc. 1991, 1992
12 * Copyright, 1988, Russell Nelson, Crynwr Software
13 *
14 * Adapted to the sample network driver core for linux,
15 * written by: Donald Becker <becker@super.org>
16 * (Now at <becker@scyld.com>)
17 *
18 * Valuable assistance from:
19 * J. Joshua Kopper <kopper@rtsg.mot.com>
20 * Olav Kvittem <Olav.Kvittem@uninett.no>
21 * Germano Caronni <caronni@nessie.cs.id.ethz.ch>
22 * Jeremy Fitzhardinge <jeremy@suite.sw.oz.au>
23 *
24 *****************************************************************************/
25/*
26 * This program is free software; you can redistribute it and/or modify
27 * it under the terms of the GNU General Public License as published by
28 * the Free Software Foundation; either version 2, or (at your option)
29 * any later version.
30 *
31 * This program is distributed in the hope that it will be useful,
32 * but WITHOUT ANY WARRANTY; without even the implied warranty of
33 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
34 * GNU General Public License for more details.
35 *
36 * You should have received a copy of the GNU General Public License
37 * along with this program; if not, write to the Free Software
38 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
39 *
40 *****************************************************************************/
41static const char version[] =
42 "de620.c: $Revision: 1.40 $, Bjorn Ekwall <bj0rn@blox.se>\n";
Jeff Garzik6aa20a22006-09-13 13:24:59 -040043
Linus Torvalds1da177e2005-04-16 15:20:36 -070044/***********************************************************************
45 *
46 * "Tuning" section.
47 *
48 * Compile-time options: (see below for descriptions)
49 * -DDE620_IO=0x378 (lpt1)
50 * -DDE620_IRQ=7 (lpt1)
Linus Torvalds1da177e2005-04-16 15:20:36 -070051 * -DSHUTDOWN_WHEN_LOST
52 * -DCOUNT_LOOPS
53 * -DLOWSPEED
54 * -DREAD_DELAY
55 * -DWRITE_DELAY
56 */
57
58/*
59 * This driver assumes that the printer port is a "normal",
60 * dumb, uni-directional port!
61 * If your port is "fancy" in any way, please try to set it to "normal"
62 * with your BIOS setup. I have no access to machines with bi-directional
63 * ports, so I can't test such a driver :-(
64 * (Yes, I _know_ it is possible to use DE620 with bidirectional ports...)
65 *
66 * There are some clones of DE620 out there, with different names.
67 * If the current driver does not recognize a clone, try to change
68 * the following #define to:
69 *
70 * #define DE620_CLONE 1
71 */
72#define DE620_CLONE 0
73
74/*
75 * If the adapter has problems with high speeds, enable this #define
76 * otherwise full printerport speed will be attempted.
77 *
78 * You can tune the READ_DELAY/WRITE_DELAY below if you enable LOWSPEED
79 *
80#define LOWSPEED
81 */
82
83#ifndef READ_DELAY
84#define READ_DELAY 100 /* adapter internal read delay in 100ns units */
85#endif
86
87#ifndef WRITE_DELAY
88#define WRITE_DELAY 100 /* adapter internal write delay in 100ns units */
89#endif
90
91/*
92 * Enable this #define if you want the adapter to do a "ifconfig down" on
93 * itself when we have detected that something is possibly wrong with it.
94 * The default behaviour is to retry with "adapter_init()" until success.
95 * This should be used for debugging purposes only.
96 *
97#define SHUTDOWN_WHEN_LOST
98 */
99
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100#ifdef LOWSPEED
101/*
102 * Enable this #define if you want to see debugging output that show how long
103 * we have to wait before the DE-620 is ready for the next read/write/command.
104 *
105#define COUNT_LOOPS
106 */
107#endif
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400108
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109#include <linux/module.h>
110#include <linux/kernel.h>
111#include <linux/types.h>
112#include <linux/fcntl.h>
113#include <linux/string.h>
114#include <linux/interrupt.h>
115#include <linux/ioport.h>
116#include <linux/in.h>
117#include <linux/errno.h>
118#include <linux/init.h>
119#include <linux/inet.h>
120#include <linux/netdevice.h>
121#include <linux/etherdevice.h>
122#include <linux/skbuff.h>
123
124#include <asm/io.h>
125#include <asm/system.h>
126
127/* Constant definitions for the DE-620 registers, commands and bits */
128#include "de620.h"
129
130typedef unsigned char byte;
131
132/*******************************************************
133 * *
134 * Definition of D-Link DE-620 Ethernet Pocket adapter *
135 * See also "de620.h" *
136 * *
137 *******************************************************/
138#ifndef DE620_IO /* Compile-time configurable */
139#define DE620_IO 0x378
140#endif
141
142#ifndef DE620_IRQ /* Compile-time configurable */
143#define DE620_IRQ 7
144#endif
145
146#define DATA_PORT (dev->base_addr)
147#define STATUS_PORT (dev->base_addr + 1)
148#define COMMAND_PORT (dev->base_addr + 2)
149
150#define RUNT 60 /* Too small Ethernet packet */
151#define GIANT 1514 /* largest legal size packet, no fcs */
152
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153/*
154 * Force media with insmod:
155 * insmod de620.o bnc=1
156 * or
157 * insmod de620.o utp=1
158 *
159 * Force io and/or irq with insmod:
160 * insmod de620.o io=0x378 irq=7
161 *
162 * Make a clone skip the Ethernet-address range check:
163 * insmod de620.o clone=1
164 */
165static int bnc;
166static int utp;
167static int io = DE620_IO;
168static int irq = DE620_IRQ;
169static int clone = DE620_CLONE;
170
Linus Torvalds1da177e2005-04-16 15:20:36 -0700171static spinlock_t de620_lock;
172
173module_param(bnc, int, 0);
174module_param(utp, int, 0);
175module_param(io, int, 0);
176module_param(irq, int, 0);
177module_param(clone, int, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700178MODULE_PARM_DESC(bnc, "DE-620 set BNC medium (0-1)");
179MODULE_PARM_DESC(utp, "DE-620 set UTP medium (0-1)");
180MODULE_PARM_DESC(io, "DE-620 I/O base address,required");
181MODULE_PARM_DESC(irq, "DE-620 IRQ number,required");
182MODULE_PARM_DESC(clone, "Check also for non-D-Link DE-620 clones (0-1)");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700183
184/***********************************************
185 * *
186 * Index to functions, as function prototypes. *
187 * *
188 ***********************************************/
189
190/*
191 * Routines used internally. (See also "convenience macros.. below")
192 */
193
194/* Put in the device structure. */
195static int de620_open(struct net_device *);
196static int de620_close(struct net_device *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700197static void de620_set_multicast_list(struct net_device *);
198static int de620_start_xmit(struct sk_buff *, struct net_device *);
199
200/* Dispatch from interrupts. */
David Howells7d12e782006-10-05 14:55:46 +0100201static irqreturn_t de620_interrupt(int, void *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202static int de620_rx_intr(struct net_device *);
203
204/* Initialization */
205static int adapter_init(struct net_device *);
206static int read_eeprom(struct net_device *);
207
208
209/*
210 * D-Link driver variables:
211 */
212#define SCR_DEF NIBBLEMODE |INTON | SLEEP | AUTOTX
213#define TCR_DEF RXPB /* not used: | TXSUCINT | T16INT */
214#define DE620_RX_START_PAGE 12 /* 12 pages (=3k) reserved for tx */
215#define DEF_NIC_CMD IRQEN | ICEN | DS1
216
217static volatile byte NIC_Cmd;
218static volatile byte next_rx_page;
219static byte first_rx_page;
220static byte last_rx_page;
221static byte EIPRegister;
222
223static struct nic {
224 byte NodeID[6];
225 byte RAM_Size;
226 byte Model;
227 byte Media;
228 byte SCR;
229} nic_data;
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400230
Linus Torvalds1da177e2005-04-16 15:20:36 -0700231/**********************************************************
232 * *
233 * Convenience macros/functions for D-Link DE-620 adapter *
234 * *
235 **********************************************************/
236#define de620_tx_buffs(dd) (inb(STATUS_PORT) & (TXBF0 | TXBF1))
237#define de620_flip_ds(dd) NIC_Cmd ^= DS0 | DS1; outb(NIC_Cmd, COMMAND_PORT);
238
239/* Check for ready-status, and return a nibble (high 4 bits) for data input */
240#ifdef COUNT_LOOPS
241static int tot_cnt;
242#endif
243static inline byte
244de620_ready(struct net_device *dev)
245{
246 byte value;
247 register short int cnt = 0;
248
249 while ((((value = inb(STATUS_PORT)) & READY) == 0) && (cnt <= 1000))
250 ++cnt;
251
252#ifdef COUNT_LOOPS
253 tot_cnt += cnt;
254#endif
255 return value & 0xf0; /* nibble */
256}
257
258static inline void
259de620_send_command(struct net_device *dev, byte cmd)
260{
261 de620_ready(dev);
262 if (cmd == W_DUMMY)
263 outb(NIC_Cmd, COMMAND_PORT);
264
265 outb(cmd, DATA_PORT);
266
267 outb(NIC_Cmd ^ CS0, COMMAND_PORT);
268 de620_ready(dev);
269 outb(NIC_Cmd, COMMAND_PORT);
270}
271
272static inline void
273de620_put_byte(struct net_device *dev, byte value)
274{
275 /* The de620_ready() makes 7 loops, on the average, on a DX2/66 */
276 de620_ready(dev);
277 outb(value, DATA_PORT);
278 de620_flip_ds(dev);
279}
280
281static inline byte
282de620_read_byte(struct net_device *dev)
283{
284 byte value;
285
286 /* The de620_ready() makes 7 loops, on the average, on a DX2/66 */
287 value = de620_ready(dev); /* High nibble */
288 de620_flip_ds(dev);
289 value |= de620_ready(dev) >> 4; /* Low nibble */
290 return value;
291}
292
293static inline void
294de620_write_block(struct net_device *dev, byte *buffer, int count, int pad)
295{
296#ifndef LOWSPEED
297 byte uflip = NIC_Cmd ^ (DS0 | DS1);
298 byte dflip = NIC_Cmd;
299#else /* LOWSPEED */
300#ifdef COUNT_LOOPS
301 int bytes = count;
302#endif /* COUNT_LOOPS */
303#endif /* LOWSPEED */
304
305#ifdef LOWSPEED
306#ifdef COUNT_LOOPS
307 tot_cnt = 0;
308#endif /* COUNT_LOOPS */
309 /* No further optimization useful, the limit is in the adapter. */
310 for ( ; count > 0; --count, ++buffer) {
311 de620_put_byte(dev,*buffer);
312 }
313 for ( count = pad ; count > 0; --count, ++buffer) {
314 de620_put_byte(dev, 0);
315 }
316 de620_send_command(dev,W_DUMMY);
317#ifdef COUNT_LOOPS
318 /* trial debug output: loops per byte in de620_ready() */
319 printk("WRITE(%d)\n", tot_cnt/((bytes?bytes:1)));
320#endif /* COUNT_LOOPS */
321#else /* not LOWSPEED */
322 for ( ; count > 0; count -=2) {
323 outb(*buffer++, DATA_PORT);
324 outb(uflip, COMMAND_PORT);
325 outb(*buffer++, DATA_PORT);
326 outb(dflip, COMMAND_PORT);
327 }
328 de620_send_command(dev,W_DUMMY);
329#endif /* LOWSPEED */
330}
331
332static inline void
333de620_read_block(struct net_device *dev, byte *data, int count)
334{
335#ifndef LOWSPEED
336 byte value;
337 byte uflip = NIC_Cmd ^ (DS0 | DS1);
338 byte dflip = NIC_Cmd;
339#else /* LOWSPEED */
340#ifdef COUNT_LOOPS
341 int bytes = count;
342
343 tot_cnt = 0;
344#endif /* COUNT_LOOPS */
345#endif /* LOWSPEED */
346
347#ifdef LOWSPEED
348 /* No further optimization useful, the limit is in the adapter. */
349 while (count-- > 0) {
350 *data++ = de620_read_byte(dev);
351 de620_flip_ds(dev);
352 }
353#ifdef COUNT_LOOPS
354 /* trial debug output: loops per byte in de620_ready() */
355 printk("READ(%d)\n", tot_cnt/(2*(bytes?bytes:1)));
356#endif /* COUNT_LOOPS */
357#else /* not LOWSPEED */
358 while (count-- > 0) {
359 value = inb(STATUS_PORT) & 0xf0; /* High nibble */
360 outb(uflip, COMMAND_PORT);
361 *data++ = value | inb(STATUS_PORT) >> 4; /* Low nibble */
362 outb(dflip , COMMAND_PORT);
363 }
364#endif /* LOWSPEED */
365}
366
367static inline void
368de620_set_delay(struct net_device *dev)
369{
370 de620_ready(dev);
371 outb(W_DFR, DATA_PORT);
372 outb(NIC_Cmd ^ CS0, COMMAND_PORT);
373
374 de620_ready(dev);
375#ifdef LOWSPEED
376 outb(WRITE_DELAY, DATA_PORT);
377#else
378 outb(0, DATA_PORT);
379#endif
380 de620_flip_ds(dev);
381
382 de620_ready(dev);
383#ifdef LOWSPEED
384 outb(READ_DELAY, DATA_PORT);
385#else
386 outb(0, DATA_PORT);
387#endif
388 de620_flip_ds(dev);
389}
390
391static inline void
392de620_set_register(struct net_device *dev, byte reg, byte value)
393{
394 de620_ready(dev);
395 outb(reg, DATA_PORT);
396 outb(NIC_Cmd ^ CS0, COMMAND_PORT);
397
398 de620_put_byte(dev, value);
399}
400
401static inline byte
402de620_get_register(struct net_device *dev, byte reg)
403{
404 byte value;
405
406 de620_send_command(dev,reg);
407 value = de620_read_byte(dev);
408 de620_send_command(dev,W_DUMMY);
409
410 return value;
411}
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400412
Linus Torvalds1da177e2005-04-16 15:20:36 -0700413/*********************************************************************
414 *
415 * Open/initialize the board.
416 *
417 * This routine should set everything up anew at each open, even
418 * registers that "should" only need to be set once at boot, so that
419 * there is a non-reboot way to recover if something goes wrong.
420 *
421 */
422static int de620_open(struct net_device *dev)
423{
424 int ret = request_irq(dev->irq, de620_interrupt, 0, dev->name, dev);
425 if (ret) {
426 printk (KERN_ERR "%s: unable to get IRQ %d\n", dev->name, dev->irq);
427 return ret;
428 }
429
430 if (adapter_init(dev)) {
431 ret = -EIO;
432 goto out_free_irq;
433 }
434
435 netif_start_queue(dev);
436 return 0;
437
438out_free_irq:
439 free_irq(dev->irq, dev);
440 return ret;
441}
442
443/************************************************
444 *
445 * The inverse routine to de620_open().
446 *
447 */
448
449static int de620_close(struct net_device *dev)
450{
451 netif_stop_queue(dev);
452 /* disable recv */
453 de620_set_register(dev, W_TCR, RXOFF);
454 free_irq(dev->irq, dev);
455 return 0;
456}
457
458/*********************************************
459 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700460 * Set or clear the multicast filter for this adaptor.
461 * (no real multicast implemented for the DE-620, but she can be promiscuous...)
462 *
463 */
464
465static void de620_set_multicast_list(struct net_device *dev)
466{
Jiri Pirko4cd24ea2010-02-08 04:30:35 +0000467 if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700468 { /* Enable promiscuous mode */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700469 de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL);
470 }
471 else
472 { /* Disable promiscuous mode, use normal mode */
473 de620_set_register(dev, W_TCR, TCR_DEF);
474 }
475}
476
477/*******************************************************
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400478 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700479 * Handle timeouts on transmit
480 */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400481
Linus Torvalds1da177e2005-04-16 15:20:36 -0700482static void de620_timeout(struct net_device *dev)
483{
484 printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, "network cable problem");
485 /* Restart the adapter. */
486 if (!adapter_init(dev)) /* maybe close it */
487 netif_wake_queue(dev);
488}
489
490/*******************************************************
491 *
492 * Copy a buffer to the adapter transmit page memory.
493 * Start sending.
494 */
495static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev)
496{
497 unsigned long flags;
498 int len;
499 byte *buffer = skb->data;
500 byte using_txbuf;
501
502 using_txbuf = de620_tx_buffs(dev); /* Peek at the adapter */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400503
Linus Torvalds1da177e2005-04-16 15:20:36 -0700504 netif_stop_queue(dev);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400505
Linus Torvalds1da177e2005-04-16 15:20:36 -0700506
507 if ((len = skb->len) < RUNT)
508 len = RUNT;
509 if (len & 1) /* send an even number of bytes */
510 ++len;
511
512 /* Start real output */
513
Alexander Beregalov62abb452009-05-15 10:22:38 +0000514 spin_lock_irqsave(&de620_lock, flags);
Alexander Beregalov2818fba2009-05-15 10:22:40 +0000515 pr_debug("de620_start_xmit: len=%d, bufs 0x%02x\n",
516 (int)skb->len, using_txbuf);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700517
518 /* select a free tx buffer. if there is one... */
519 switch (using_txbuf) {
520 default: /* both are free: use TXBF0 */
521 case TXBF1: /* use TXBF0 */
522 de620_send_command(dev,W_CR | RW0);
523 using_txbuf |= TXBF0;
524 break;
525
526 case TXBF0: /* use TXBF1 */
527 de620_send_command(dev,W_CR | RW1);
528 using_txbuf |= TXBF1;
529 break;
530
531 case (TXBF0 | TXBF1): /* NONE!!! */
532 printk(KERN_WARNING "%s: No tx-buffer available!\n", dev->name);
533 spin_unlock_irqrestore(&de620_lock, flags);
Patrick McHardy5b548142009-06-12 06:22:29 +0000534 return NETDEV_TX_BUSY;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700535 }
536 de620_write_block(dev, buffer, skb->len, len-skb->len);
537
538 dev->trans_start = jiffies;
539 if(!(using_txbuf == (TXBF0 | TXBF1)))
540 netif_wake_queue(dev);
541
Jeff Garzik09f75cd2007-10-03 17:41:50 -0700542 dev->stats.tx_packets++;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543 spin_unlock_irqrestore(&de620_lock, flags);
544 dev_kfree_skb (skb);
Patrick McHardy6ed10652009-06-23 06:03:08 +0000545 return NETDEV_TX_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700546}
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400547
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548/*****************************************************
549 *
550 * Handle the network interface interrupts.
551 *
552 */
553static irqreturn_t
David Howells7d12e782006-10-05 14:55:46 +0100554de620_interrupt(int irq_in, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555{
556 struct net_device *dev = dev_id;
557 byte irq_status;
558 int bogus_count = 0;
559 int again = 0;
560
561 spin_lock(&de620_lock);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400562
Linus Torvalds1da177e2005-04-16 15:20:36 -0700563 /* Read the status register (_not_ the status port) */
564 irq_status = de620_get_register(dev, R_STS);
565
Alexander Beregalov2818fba2009-05-15 10:22:40 +0000566 pr_debug("de620_interrupt (%2.2X)\n", irq_status);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700567
568 if (irq_status & RXGOOD) {
569 do {
570 again = de620_rx_intr(dev);
Alexander Beregalov2818fba2009-05-15 10:22:40 +0000571 pr_debug("again=%d\n", again);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700572 }
573 while (again && (++bogus_count < 100));
574 }
575
576 if(de620_tx_buffs(dev) != (TXBF0 | TXBF1))
577 netif_wake_queue(dev);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400578
Linus Torvalds1da177e2005-04-16 15:20:36 -0700579 spin_unlock(&de620_lock);
580 return IRQ_HANDLED;
581}
582
583/**************************************
584 *
585 * Get a packet from the adapter
586 *
587 * Send it "upstairs"
588 *
589 */
590static int de620_rx_intr(struct net_device *dev)
591{
592 struct header_buf {
593 byte status;
594 byte Rx_NextPage;
595 unsigned short Rx_ByteCount;
596 } header_buf;
597 struct sk_buff *skb;
598 int size;
599 byte *buffer;
600 byte pagelink;
601 byte curr_page;
602
Alexander Beregalov2818fba2009-05-15 10:22:40 +0000603 pr_debug("de620_rx_intr: next_rx_page = %d\n", next_rx_page);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700604
605 /* Tell the adapter that we are going to read data, and from where */
606 de620_send_command(dev, W_CR | RRN);
607 de620_set_register(dev, W_RSA1, next_rx_page);
608 de620_set_register(dev, W_RSA0, 0);
609
610 /* Deep breath, and away we goooooo */
611 de620_read_block(dev, (byte *)&header_buf, sizeof(struct header_buf));
Alexander Beregalov2818fba2009-05-15 10:22:40 +0000612 pr_debug("page status=0x%02x, nextpage=%d, packetsize=%d\n",
613 header_buf.status, header_buf.Rx_NextPage,
614 header_buf.Rx_ByteCount);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700615
616 /* Plausible page header? */
617 pagelink = header_buf.Rx_NextPage;
618 if ((pagelink < first_rx_page) || (last_rx_page < pagelink)) {
619 /* Ouch... Forget it! Skip all and start afresh... */
620 printk(KERN_WARNING "%s: Ring overrun? Restoring...\n", dev->name);
621 /* You win some, you lose some. And sometimes plenty... */
622 adapter_init(dev);
623 netif_wake_queue(dev);
Jeff Garzik09f75cd2007-10-03 17:41:50 -0700624 dev->stats.rx_over_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700625 return 0;
626 }
627
628 /* OK, this look good, so far. Let's see if it's consistent... */
629 /* Let's compute the start of the next packet, based on where we are */
630 pagelink = next_rx_page +
631 ((header_buf.Rx_ByteCount + (4 - 1 + 0x100)) >> 8);
632
633 /* Are we going to wrap around the page counter? */
634 if (pagelink > last_rx_page)
635 pagelink -= (last_rx_page - first_rx_page + 1);
636
637 /* Is the _computed_ next page number equal to what the adapter says? */
638 if (pagelink != header_buf.Rx_NextPage) {
639 /* Naah, we'll skip this packet. Probably bogus data as well */
640 printk(KERN_WARNING "%s: Page link out of sync! Restoring...\n", dev->name);
641 next_rx_page = header_buf.Rx_NextPage; /* at least a try... */
642 de620_send_command(dev, W_DUMMY);
643 de620_set_register(dev, W_NPRF, next_rx_page);
Jeff Garzik09f75cd2007-10-03 17:41:50 -0700644 dev->stats.rx_over_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700645 return 0;
646 }
647 next_rx_page = pagelink;
648
649 size = header_buf.Rx_ByteCount - 4;
650 if ((size < RUNT) || (GIANT < size)) {
651 printk(KERN_WARNING "%s: Illegal packet size: %d!\n", dev->name, size);
652 }
653 else { /* Good packet? */
654 skb = dev_alloc_skb(size+2);
655 if (skb == NULL) { /* Yeah, but no place to put it... */
656 printk(KERN_WARNING "%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size);
Jeff Garzik09f75cd2007-10-03 17:41:50 -0700657 dev->stats.rx_dropped++;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700658 }
659 else { /* Yep! Go get it! */
660 skb_reserve(skb,2); /* Align */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700661 /* skb->data points to the start of sk_buff data area */
662 buffer = skb_put(skb,size);
663 /* copy the packet into the buffer */
664 de620_read_block(dev, buffer, size);
Alexander Beregalov2818fba2009-05-15 10:22:40 +0000665 pr_debug("Read %d bytes\n", size);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700666 skb->protocol=eth_type_trans(skb,dev);
667 netif_rx(skb); /* deliver it "upstairs" */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700668 /* count all receives */
Jeff Garzik09f75cd2007-10-03 17:41:50 -0700669 dev->stats.rx_packets++;
670 dev->stats.rx_bytes += size;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700671 }
672 }
673
674 /* Let's peek ahead to see if we have read the last current packet */
675 /* NOTE! We're _not_ checking the 'EMPTY'-flag! This seems better... */
676 curr_page = de620_get_register(dev, R_CPR);
677 de620_set_register(dev, W_NPRF, next_rx_page);
Alexander Beregalov2818fba2009-05-15 10:22:40 +0000678 pr_debug("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700679
680 return (next_rx_page != curr_page); /* That was slightly tricky... */
681}
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400682
Linus Torvalds1da177e2005-04-16 15:20:36 -0700683/*********************************************
684 *
685 * Reset the adapter to a known state
686 *
687 */
688static int adapter_init(struct net_device *dev)
689{
690 int i;
691 static int was_down;
692
693 if ((nic_data.Model == 3) || (nic_data.Model == 0)) { /* CT */
694 EIPRegister = NCTL0;
695 if (nic_data.Media != 1)
696 EIPRegister |= NIS0; /* not BNC */
697 }
698 else if (nic_data.Model == 2) { /* UTP */
699 EIPRegister = NCTL0 | NIS0;
700 }
701
702 if (utp)
703 EIPRegister = NCTL0 | NIS0;
704 if (bnc)
705 EIPRegister = NCTL0;
706
707 de620_send_command(dev, W_CR | RNOP | CLEAR);
708 de620_send_command(dev, W_CR | RNOP);
709
710 de620_set_register(dev, W_SCR, SCR_DEF);
711 /* disable recv to wait init */
712 de620_set_register(dev, W_TCR, RXOFF);
713
714 /* Set the node ID in the adapter */
715 for (i = 0; i < 6; ++i) { /* W_PARn = 0xaa + n */
716 de620_set_register(dev, W_PAR0 + i, dev->dev_addr[i]);
717 }
718
719 de620_set_register(dev, W_EIP, EIPRegister);
720
721 next_rx_page = first_rx_page = DE620_RX_START_PAGE;
722 if (nic_data.RAM_Size)
723 last_rx_page = nic_data.RAM_Size - 1;
724 else /* 64k RAM */
725 last_rx_page = 255;
726
727 de620_set_register(dev, W_SPR, first_rx_page); /* Start Page Register*/
728 de620_set_register(dev, W_EPR, last_rx_page); /* End Page Register */
729 de620_set_register(dev, W_CPR, first_rx_page);/*Current Page Register*/
730 de620_send_command(dev, W_NPR | first_rx_page); /* Next Page Register*/
731 de620_send_command(dev, W_DUMMY);
732 de620_set_delay(dev);
733
734 /* Final sanity check: Anybody out there? */
735 /* Let's hope some bits from the statusregister make a good check */
736#define CHECK_MASK ( 0 | TXSUC | T16 | 0 | RXCRC | RXSHORT | 0 | 0 )
737#define CHECK_OK ( 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 )
738 /* success: X 0 0 X 0 0 X X */
739 /* ignore: EEDI RXGOOD COLS LNKS*/
740
741 if (((i = de620_get_register(dev, R_STS)) & CHECK_MASK) != CHECK_OK) {
742 printk(KERN_ERR "%s: Something has happened to the DE-620! Please check it"
743#ifdef SHUTDOWN_WHEN_LOST
744 " and do a new ifconfig"
745#endif
746 "! (%02x)\n", dev->name, i);
747#ifdef SHUTDOWN_WHEN_LOST
748 /* Goodbye, cruel world... */
749 dev->flags &= ~IFF_UP;
750 de620_close(dev);
751#endif
752 was_down = 1;
753 return 1; /* failed */
754 }
755 if (was_down) {
756 printk(KERN_WARNING "%s: Thanks, I feel much better now!\n", dev->name);
757 was_down = 0;
758 }
759
760 /* All OK, go ahead... */
761 de620_set_register(dev, W_TCR, TCR_DEF);
762
763 return 0; /* all ok */
764}
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400765
Stephen Hemmingerb8aa76a2009-01-07 17:34:36 -0800766static const struct net_device_ops de620_netdev_ops = {
767 .ndo_open = de620_open,
768 .ndo_stop = de620_close,
769 .ndo_start_xmit = de620_start_xmit,
770 .ndo_tx_timeout = de620_timeout,
771 .ndo_set_multicast_list = de620_set_multicast_list,
772 .ndo_change_mtu = eth_change_mtu,
773 .ndo_set_mac_address = eth_mac_addr,
774 .ndo_validate_addr = eth_validate_addr,
775};
776
Linus Torvalds1da177e2005-04-16 15:20:36 -0700777/******************************************************************************
778 *
779 * Only start-up code below
780 *
781 */
782/****************************************
783 *
784 * Check if there is a DE-620 connected
785 */
786struct net_device * __init de620_probe(int unit)
787{
788 byte checkbyte = 0xa5;
789 struct net_device *dev;
790 int err = -ENOMEM;
791 int i;
792
Jeff Garzik09f75cd2007-10-03 17:41:50 -0700793 dev = alloc_etherdev(0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700794 if (!dev)
795 goto out;
796
Linus Torvalds1da177e2005-04-16 15:20:36 -0700797 spin_lock_init(&de620_lock);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400798
Linus Torvalds1da177e2005-04-16 15:20:36 -0700799 /*
800 * This is where the base_addr and irq gets set.
801 * Tunable at compile-time and insmod-time
802 */
803 dev->base_addr = io;
804 dev->irq = irq;
805
806 /* allow overriding parameters on command line */
807 if (unit >= 0) {
808 sprintf(dev->name, "eth%d", unit);
809 netdev_boot_setup_check(dev);
810 }
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400811
Alexander Beregalov2818fba2009-05-15 10:22:40 +0000812 pr_debug("%s", version);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700813
814 printk(KERN_INFO "D-Link DE-620 pocket adapter");
815
816 if (!request_region(dev->base_addr, 3, "de620")) {
817 printk(" io 0x%3lX, which is busy.\n", dev->base_addr);
818 err = -EBUSY;
819 goto out1;
820 }
821
822 /* Initially, configure basic nibble mode, so we can read the EEPROM */
823 NIC_Cmd = DEF_NIC_CMD;
824 de620_set_register(dev, W_EIP, EIPRegister);
825
826 /* Anybody out there? */
827 de620_set_register(dev, W_CPR, checkbyte);
828 checkbyte = de620_get_register(dev, R_CPR);
829
830 if ((checkbyte != 0xa5) || (read_eeprom(dev) != 0)) {
831 printk(" not identified in the printer port\n");
832 err = -ENODEV;
833 goto out2;
834 }
835
836 /* else, got it! */
Joe Perches0795af52007-10-03 17:59:30 -0700837 dev->dev_addr[0] = nic_data.NodeID[0];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700838 for (i = 1; i < ETH_ALEN; i++) {
Joe Perches0795af52007-10-03 17:59:30 -0700839 dev->dev_addr[i] = nic_data.NodeID[i];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700840 dev->broadcast[i] = 0xff;
841 }
842
Johannes Berge1749612008-10-27 15:59:26 -0700843 printk(", Ethernet Address: %pM", dev->dev_addr);
Joe Perches0795af52007-10-03 17:59:30 -0700844
Linus Torvalds1da177e2005-04-16 15:20:36 -0700845 printk(" (%dk RAM,",
846 (nic_data.RAM_Size) ? (nic_data.RAM_Size >> 2) : 64);
847
848 if (nic_data.Media == 1)
849 printk(" BNC)\n");
850 else
851 printk(" UTP)\n");
852
Stephen Hemmingerb8aa76a2009-01-07 17:34:36 -0800853 dev->netdev_ops = &de620_netdev_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700854 dev->watchdog_timeo = HZ*2;
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400855
Linus Torvalds1da177e2005-04-16 15:20:36 -0700856 /* base_addr and irq are already set, see above! */
857
858 /* dump eeprom */
Alexander Beregalov2818fba2009-05-15 10:22:40 +0000859 pr_debug("\nEEPROM contents:\n"
860 "RAM_Size = 0x%02X\n"
861 "NodeID = %pM\n"
862 "Model = %d\n"
863 "Media = %d\n"
864 "SCR = 0x%02x\n", nic_data.RAM_Size, nic_data.NodeID,
865 nic_data.Model, nic_data.Media, nic_data.SCR);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700866
867 err = register_netdev(dev);
868 if (err)
869 goto out2;
870 return dev;
871
872out2:
873 release_region(dev->base_addr, 3);
874out1:
875 free_netdev(dev);
876out:
877 return ERR_PTR(err);
878}
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400879
Linus Torvalds1da177e2005-04-16 15:20:36 -0700880/**********************************
881 *
882 * Read info from on-board EEPROM
883 *
884 * Note: Bitwise serial I/O to/from the EEPROM vi the status _register_!
885 */
886#define sendit(dev,data) de620_set_register(dev, W_EIP, data | EIPRegister);
887
888static unsigned short __init ReadAWord(struct net_device *dev, int from)
889{
890 unsigned short data;
891 int nbits;
892
893 /* cs [__~~] SET SEND STATE */
894 /* di [____] */
895 /* sck [_~~_] */
896 sendit(dev, 0); sendit(dev, 1); sendit(dev, 5); sendit(dev, 4);
897
898 /* Send the 9-bit address from where we want to read the 16-bit word */
899 for (nbits = 9; nbits > 0; --nbits, from <<= 1) {
900 if (from & 0x0100) { /* bit set? */
901 /* cs [~~~~] SEND 1 */
902 /* di [~~~~] */
903 /* sck [_~~_] */
904 sendit(dev, 6); sendit(dev, 7); sendit(dev, 7); sendit(dev, 6);
905 }
906 else {
907 /* cs [~~~~] SEND 0 */
908 /* di [____] */
909 /* sck [_~~_] */
910 sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4);
911 }
912 }
913
914 /* Shift in the 16-bit word. The bits appear serially in EEDI (=0x80) */
915 for (data = 0, nbits = 16; nbits > 0; --nbits) {
916 /* cs [~~~~] SEND 0 */
917 /* di [____] */
918 /* sck [_~~_] */
919 sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4);
920 data = (data << 1) | ((de620_get_register(dev, R_STS) & EEDI) >> 7);
921 }
922 /* cs [____] RESET SEND STATE */
923 /* di [____] */
924 /* sck [_~~_] */
925 sendit(dev, 0); sendit(dev, 1); sendit(dev, 1); sendit(dev, 0);
926
927 return data;
928}
929
930static int __init read_eeprom(struct net_device *dev)
931{
932 unsigned short wrd;
933
934 /* D-Link Ethernet addresses are in the series 00:80:c8:7X:XX:XX:XX */
935 wrd = ReadAWord(dev, 0x1aa); /* bytes 0 + 1 of NodeID */
936 if (!clone && (wrd != htons(0x0080))) /* Valid D-Link ether sequence? */
937 return -1; /* Nope, not a DE-620 */
938 nic_data.NodeID[0] = wrd & 0xff;
939 nic_data.NodeID[1] = wrd >> 8;
940
941 wrd = ReadAWord(dev, 0x1ab); /* bytes 2 + 3 of NodeID */
942 if (!clone && ((wrd & 0xff) != 0xc8)) /* Valid D-Link ether sequence? */
943 return -1; /* Nope, not a DE-620 */
944 nic_data.NodeID[2] = wrd & 0xff;
945 nic_data.NodeID[3] = wrd >> 8;
946
947 wrd = ReadAWord(dev, 0x1ac); /* bytes 4 + 5 of NodeID */
948 nic_data.NodeID[4] = wrd & 0xff;
949 nic_data.NodeID[5] = wrd >> 8;
950
951 wrd = ReadAWord(dev, 0x1ad); /* RAM size in pages (256 bytes). 0 = 64k */
952 nic_data.RAM_Size = (wrd >> 8);
953
954 wrd = ReadAWord(dev, 0x1ae); /* hardware model (CT = 3) */
955 nic_data.Model = (wrd & 0xff);
956
957 wrd = ReadAWord(dev, 0x1af); /* media (indicates BNC/UTP) */
958 nic_data.Media = (wrd & 0xff);
959
960 wrd = ReadAWord(dev, 0x1a8); /* System Configuration Register */
961 nic_data.SCR = (wrd >> 8);
962
963 return 0; /* no errors */
964}
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400965
Linus Torvalds1da177e2005-04-16 15:20:36 -0700966/******************************************************************************
967 *
968 * Loadable module skeleton
969 *
970 */
971#ifdef MODULE
972static struct net_device *de620_dev;
973
Sam Ravnborgb2cba5b2006-03-08 00:06:33 -0800974int __init init_module(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700975{
976 de620_dev = de620_probe(-1);
977 if (IS_ERR(de620_dev))
978 return PTR_ERR(de620_dev);
979 return 0;
980}
981
982void cleanup_module(void)
983{
984 unregister_netdev(de620_dev);
985 release_region(de620_dev->base_addr, 3);
986 free_netdev(de620_dev);
987}
988#endif /* MODULE */
989MODULE_LICENSE("GPL");