blob: 4daad8cd56ea885af08391c9c0cef4481e7ad416 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002** hp100.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07003** HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters
4**
5** $Id: hp100.c,v 1.58 2001/09/24 18:03:01 perex Exp perex $
6**
7** Based on the HP100 driver written by Jaroslav Kysela <perex@jcu.cz>
Jeff Garzik6aa20a22006-09-13 13:24:59 -04008** Extended for new busmaster capable chipsets by
Linus Torvalds1da177e2005-04-16 15:20:36 -07009** Siegfried "Frieder" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>
10**
Jaroslav Kyselac1017a42007-10-15 09:50:19 +020011** Maintained by: Jaroslav Kysela <perex@perex.cz>
Jeff Garzik6aa20a22006-09-13 13:24:59 -040012**
Linus Torvalds1da177e2005-04-16 15:20:36 -070013** This driver has only been tested with
14** -- HP J2585B 10/100 Mbit/s PCI Busmaster
Jeff Garzik6aa20a22006-09-13 13:24:59 -040015** -- HP J2585A 10/100 Mbit/s PCI
Pavel Machek31df7b72005-05-01 08:58:52 -070016** -- HP J2970A 10 Mbit/s PCI Combo 10base-T/BNC
17** -- HP J2973A 10 Mbit/s PCI 10base-T
Linus Torvalds1da177e2005-04-16 15:20:36 -070018** -- HP J2573 10/100 ISA
19** -- Compex ReadyLink ENET100-VG4 10/100 Mbit/s PCI / EISA
20** -- Compex FreedomLine 100/VG 10/100 Mbit/s ISA / EISA / PCI
Jeff Garzik6aa20a22006-09-13 13:24:59 -040021**
Linus Torvalds1da177e2005-04-16 15:20:36 -070022** but it should also work with the other CASCADE based adapters.
23**
24** TODO:
25** - J2573 seems to hang sometimes when in shared memory mode.
26** - Mode for Priority TX
27** - Check PCI registers, performance might be improved?
28** - To reduce interrupt load in busmaster, one could switch off
29** the interrupts that are used to refill the queues whenever the
30** queues are filled up to more than a certain threshold.
31** - some updates for EISA version of card
32**
33**
34** This code is free software; you can redistribute it and/or modify
35** it under the terms of the GNU General Public License as published by
36** the Free Software Foundation; either version 2 of the License, or
37** (at your option) any later version.
38**
39** This code is distributed in the hope that it will be useful,
40** but WITHOUT ANY WARRANTY; without even the implied warranty of
41** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
42** GNU General Public License for more details.
43**
44** You should have received a copy of the GNU General Public License
45** along with this program; if not, write to the Free Software
46** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
47**
48** 1.57c -> 1.58
49** - used indent to change coding-style
50** - added KTI DP-200 EISA ID
51** - ioremap is also used for low (<1MB) memory (multi-architecture support)
52**
53** 1.57b -> 1.57c - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
54** - release resources on failure in init_module
55**
56** 1.57 -> 1.57b - Jean II
57** - fix spinlocks, SMP is now working !
58**
59** 1.56 -> 1.57
60** - updates for new PCI interface for 2.1 kernels
61**
62** 1.55 -> 1.56
63** - removed printk in misc. interrupt and update statistics to allow
64** monitoring of card status
65** - timing changes in xmit routines, relogin to 100VG hub added when
66** driver does reset
67** - included fix for Compex FreedomLine PCI adapter
Jeff Garzik6aa20a22006-09-13 13:24:59 -040068**
Linus Torvalds1da177e2005-04-16 15:20:36 -070069** 1.54 -> 1.55
70** - fixed bad initialization in init_module
71** - added Compex FreedomLine adapter
72** - some fixes in card initialization
73**
74** 1.53 -> 1.54
75** - added hardware multicast filter support (doesn't work)
Jeff Garzik6aa20a22006-09-13 13:24:59 -040076** - little changes in hp100_sense_lan routine
Linus Torvalds1da177e2005-04-16 15:20:36 -070077** - added support for Coax and AUI (J2970)
78** - fix for multiple cards and hp100_mode parameter (insmod)
Jeff Garzik6aa20a22006-09-13 13:24:59 -040079** - fix for shared IRQ
Linus Torvalds1da177e2005-04-16 15:20:36 -070080**
81** 1.52 -> 1.53
82** - fixed bug in multicast support
83**
84*/
85
86#define HP100_DEFAULT_PRIORITY_TX 0
87
88#undef HP100_DEBUG
89#undef HP100_DEBUG_B /* Trace */
90#undef HP100_DEBUG_BM /* Debug busmaster code (PDL stuff) */
91
92#undef HP100_DEBUG_TRAINING /* Debug login-to-hub procedure */
93#undef HP100_DEBUG_TX
94#undef HP100_DEBUG_IRQ
95#undef HP100_DEBUG_RX
96
97#undef HP100_MULTICAST_FILTER /* Need to be debugged... */
98
Linus Torvalds1da177e2005-04-16 15:20:36 -070099#include <linux/module.h>
100#include <linux/kernel.h>
Alexey Dobriyand43c36d2009-10-07 17:09:06 +0400101#include <linux/sched.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700102#include <linux/string.h>
103#include <linux/errno.h>
104#include <linux/ioport.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105#include <linux/interrupt.h>
106#include <linux/eisa.h>
107#include <linux/pci.h>
Domen Puncer1e7f0bd2005-06-26 18:22:14 -0400108#include <linux/dma-mapping.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109#include <linux/spinlock.h>
110#include <linux/netdevice.h>
111#include <linux/etherdevice.h>
112#include <linux/skbuff.h>
113#include <linux/types.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700114#include <linux/delay.h>
115#include <linux/init.h>
116#include <linux/bitops.h>
Marcelo Feitoza Parisiff5688a2006-01-09 18:37:15 -0800117#include <linux/jiffies.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700118
119#include <asm/io.h>
120
121#include "hp100.h"
122
123/*
124 * defines
125 */
126
127#define HP100_BUS_ISA 0
128#define HP100_BUS_EISA 1
129#define HP100_BUS_PCI 2
130
131#define HP100_REGION_SIZE 0x20 /* for ioports */
132#define HP100_SIG_LEN 8 /* same as EISA_SIG_LEN */
133
134#define HP100_MAX_PACKET_SIZE (1536+4)
135#define HP100_MIN_PACKET_SIZE 60
136
137#ifndef HP100_DEFAULT_RX_RATIO
138/* default - 75% onboard memory on the card are used for RX packets */
139#define HP100_DEFAULT_RX_RATIO 75
140#endif
141
142#ifndef HP100_DEFAULT_PRIORITY_TX
143/* default - don't enable transmit outgoing packets as priority */
144#define HP100_DEFAULT_PRIORITY_TX 0
145#endif
146
147/*
148 * structures
149 */
150
151struct hp100_private {
152 spinlock_t lock;
153 char id[HP100_SIG_LEN];
154 u_short chip;
155 u_short soft_model;
156 u_int memory_size;
157 u_int virt_memory_size;
158 u_short rx_ratio; /* 1 - 99 */
159 u_short priority_tx; /* != 0 - priority tx */
160 u_short mode; /* PIO, Shared Mem or Busmaster */
161 u_char bus;
162 struct pci_dev *pci_dev;
163 short mem_mapped; /* memory mapped access */
164 void __iomem *mem_ptr_virt; /* virtual memory mapped area, maybe NULL */
165 unsigned long mem_ptr_phys; /* physical memory mapped area */
166 short lan_type; /* 10Mb/s, 100Mb/s or -1 (error) */
167 int hub_status; /* was login to hub successful? */
168 u_char mac1_mode;
169 u_char mac2_mode;
170 u_char hash_bytes[8];
171 struct net_device_stats stats;
172
173 /* Rings for busmaster mode: */
174 hp100_ring_t *rxrhead; /* Head (oldest) index into rxring */
175 hp100_ring_t *rxrtail; /* Tail (newest) index into rxring */
176 hp100_ring_t *txrhead; /* Head (oldest) index into txring */
177 hp100_ring_t *txrtail; /* Tail (newest) index into txring */
178
179 hp100_ring_t rxring[MAX_RX_PDL];
180 hp100_ring_t txring[MAX_TX_PDL];
181
182 u_int *page_vaddr_algn; /* Aligned virtual address of allocated page */
183 u_long whatever_offset; /* Offset to bus/phys/dma address */
184 int rxrcommit; /* # Rx PDLs commited to adapter */
185 int txrcommit; /* # Tx PDLs commited to adapter */
186};
187
188/*
189 * variables
190 */
Jeff Garzik7525d4b2006-10-02 21:08:22 -0400191#ifdef CONFIG_ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700192static const char *hp100_isa_tbl[] = {
193 "HWPF150", /* HP J2573 rev A */
194 "HWP1950", /* HP J2573 */
195};
Jeff Garzik2c81fbc2006-10-01 07:32:20 -0400196#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700197
198#ifdef CONFIG_EISA
199static struct eisa_device_id hp100_eisa_tbl[] = {
200 { "HWPF180" }, /* HP J2577 rev A */
201 { "HWP1920" }, /* HP 27248B */
202 { "HWP1940" }, /* HP J2577 */
203 { "HWP1990" }, /* HP J2577 */
204 { "CPX0301" }, /* ReadyLink ENET100-VG4 */
205 { "CPX0401" }, /* FreedomLine 100/VG */
206 { "" } /* Mandatory final entry ! */
207};
208MODULE_DEVICE_TABLE(eisa, hp100_eisa_tbl);
209#endif
210
211#ifdef CONFIG_PCI
Alexey Dobriyana3aa1882010-01-07 11:58:11 +0000212static DEFINE_PCI_DEVICE_TABLE(hp100_pci_tbl) = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700213 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585A, PCI_ANY_ID, PCI_ANY_ID,},
214 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585B, PCI_ANY_ID, PCI_ANY_ID,},
215 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2970A, PCI_ANY_ID, PCI_ANY_ID,},
216 {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2973A, PCI_ANY_ID, PCI_ANY_ID,},
217 {PCI_VENDOR_ID_COMPEX, PCI_DEVICE_ID_COMPEX_ENET100VG4, PCI_ANY_ID, PCI_ANY_ID,},
218 {PCI_VENDOR_ID_COMPEX2, PCI_DEVICE_ID_COMPEX2_100VG, PCI_ANY_ID, PCI_ANY_ID,},
219/* {PCI_VENDOR_ID_KTI, PCI_DEVICE_ID_KTI_DP200, PCI_ANY_ID, PCI_ANY_ID }, */
220 {} /* Terminating entry */
221};
222MODULE_DEVICE_TABLE(pci, hp100_pci_tbl);
223#endif
224
225static int hp100_rx_ratio = HP100_DEFAULT_RX_RATIO;
226static int hp100_priority_tx = HP100_DEFAULT_PRIORITY_TX;
227static int hp100_mode = 1;
228
229module_param(hp100_rx_ratio, int, 0);
230module_param(hp100_priority_tx, int, 0);
231module_param(hp100_mode, int, 0);
232
233/*
234 * prototypes
235 */
236
237static int hp100_probe1(struct net_device *dev, int ioaddr, u_char bus,
238 struct pci_dev *pci_dev);
239
240
241static int hp100_open(struct net_device *dev);
242static int hp100_close(struct net_device *dev);
Stephen Hemminger613573252009-08-31 19:50:58 +0000243static netdev_tx_t hp100_start_xmit(struct sk_buff *skb,
244 struct net_device *dev);
245static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb,
246 struct net_device *dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700247static void hp100_rx(struct net_device *dev);
248static struct net_device_stats *hp100_get_stats(struct net_device *dev);
249static void hp100_misc_interrupt(struct net_device *dev);
250static void hp100_update_stats(struct net_device *dev);
251static void hp100_clear_stats(struct hp100_private *lp, int ioaddr);
252static void hp100_set_multicast_list(struct net_device *dev);
David Howells7d12e782006-10-05 14:55:46 +0100253static irqreturn_t hp100_interrupt(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700254static void hp100_start_interface(struct net_device *dev);
255static void hp100_stop_interface(struct net_device *dev);
256static void hp100_load_eeprom(struct net_device *dev, u_short ioaddr);
257static int hp100_sense_lan(struct net_device *dev);
258static int hp100_login_to_vg_hub(struct net_device *dev,
259 u_short force_relogin);
260static int hp100_down_vg_link(struct net_device *dev);
261static void hp100_cascade_reset(struct net_device *dev, u_short enable);
262static void hp100_BM_shutdown(struct net_device *dev);
263static void hp100_mmuinit(struct net_device *dev);
264static void hp100_init_pdls(struct net_device *dev);
265static int hp100_init_rxpdl(struct net_device *dev,
266 register hp100_ring_t * ringptr,
267 register u_int * pdlptr);
268static int hp100_init_txpdl(struct net_device *dev,
269 register hp100_ring_t * ringptr,
270 register u_int * pdlptr);
271static void hp100_rxfill(struct net_device *dev);
272static void hp100_hwinit(struct net_device *dev);
273static void hp100_clean_txring(struct net_device *dev);
274#ifdef HP100_DEBUG
275static void hp100_RegisterDump(struct net_device *dev);
276#endif
277
278/* Conversion to new PCI API :
279 * Convert an address in a kernel buffer to a bus/phys/dma address.
280 * This work *only* for memory fragments part of lp->page_vaddr,
281 * because it was properly DMA allocated via pci_alloc_consistent(),
Adrian Bunk943ffb52006-01-10 00:10:13 +0100282 * so we just need to "retrieve" the original mapping to bus/phys/dma
Linus Torvalds1da177e2005-04-16 15:20:36 -0700283 * address - Jean II */
284static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr)
285{
286 struct hp100_private *lp = netdev_priv(dev);
287 return ((u_long) ptr) + lp->whatever_offset;
288}
289
290static inline u_int pdl_map_data(struct hp100_private *lp, void *data)
291{
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400292 return pci_map_single(lp->pci_dev, data,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700293 MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE);
294}
295
296/* TODO: This function should not really be needed in a good design... */
297static void wait(void)
298{
299 mdelay(1);
300}
301
302/*
303 * probe functions
304 * These functions should - if possible - avoid doing write operations
305 * since this could cause problems when the card is not installed.
306 */
307
308/*
309 * Read board id and convert to string.
310 * Effectively same code as decode_eisa_sig
311 */
312static __devinit const char *hp100_read_id(int ioaddr)
313{
314 int i;
315 static char str[HP100_SIG_LEN];
316 unsigned char sig[4], sum;
317 unsigned short rev;
318
319 hp100_page(ID_MAC_ADDR);
320 sum = 0;
321 for (i = 0; i < 4; i++) {
322 sig[i] = hp100_inb(BOARD_ID + i);
323 sum += sig[i];
324 }
325
326 sum += hp100_inb(BOARD_ID + i);
327 if (sum != 0xff)
328 return NULL; /* bad checksum */
329
330 str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
331 str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
332 str[2] = (sig[1] & 0x1f) + ('A' - 1);
333 rev = (sig[2] << 8) | sig[3];
334 sprintf(str + 3, "%04X", rev);
335
336 return str;
337}
338
Jeff Garzik7525d4b2006-10-02 21:08:22 -0400339#ifdef CONFIG_ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700340static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
341{
342 const char *sig;
343 int i;
344
345 if (!request_region(ioaddr, HP100_REGION_SIZE, "hp100"))
346 goto err;
347
348 if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE) {
349 release_region(ioaddr, HP100_REGION_SIZE);
350 goto err;
351 }
352
353 sig = hp100_read_id(ioaddr);
354 release_region(ioaddr, HP100_REGION_SIZE);
355
356 if (sig == NULL)
357 goto err;
358
359 for (i = 0; i < ARRAY_SIZE(hp100_isa_tbl); i++) {
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400360 if (!strcmp(hp100_isa_tbl[i], sig))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700361 break;
362
363 }
364
365 if (i < ARRAY_SIZE(hp100_isa_tbl))
366 return hp100_probe1(dev, ioaddr, HP100_BUS_ISA, NULL);
367 err:
368 return -ENODEV;
369
370}
371/*
372 * Probe for ISA board.
373 * EISA and PCI are handled by device infrastructure.
374 */
375
376static int __init hp100_isa_probe(struct net_device *dev, int addr)
377{
378 int err = -ENODEV;
379
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400380 /* Probe for a specific ISA address */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700381 if (addr > 0xff && addr < 0x400)
382 err = hp100_isa_probe1(dev, addr);
383
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400384 else if (addr != 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700385 err = -ENXIO;
386
387 else {
388 /* Probe all ISA possible port regions */
389 for (addr = 0x100; addr < 0x400; addr += 0x20) {
390 err = hp100_isa_probe1(dev, addr);
391 if (!err)
392 break;
393 }
394 }
395 return err;
396}
Jeff Garzik7525d4b2006-10-02 21:08:22 -0400397#endif /* CONFIG_ISA */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398
Jeff Garzik7525d4b2006-10-02 21:08:22 -0400399#if !defined(MODULE) && defined(CONFIG_ISA)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700400struct net_device * __init hp100_probe(int unit)
401{
402 struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
403 int err;
404
405 if (!dev)
406 return ERR_PTR(-ENODEV);
407
Linus Torvalds1da177e2005-04-16 15:20:36 -0700408#ifdef HP100_DEBUG_B
409 hp100_outw(0x4200, TRACE);
410 printk("hp100: %s: probe\n", dev->name);
411#endif
412
413 if (unit >= 0) {
414 sprintf(dev->name, "eth%d", unit);
415 netdev_boot_setup_check(dev);
416 }
417
418 err = hp100_isa_probe(dev, dev->base_addr);
419 if (err)
420 goto out;
421
Linus Torvalds1da177e2005-04-16 15:20:36 -0700422 return dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700423 out:
424 free_netdev(dev);
425 return ERR_PTR(err);
426}
Jeff Garzik7525d4b2006-10-02 21:08:22 -0400427#endif /* !MODULE && CONFIG_ISA */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700428
Stephen Hemmingerd9d6f462009-01-07 18:13:49 -0800429static const struct net_device_ops hp100_bm_netdev_ops = {
430 .ndo_open = hp100_open,
431 .ndo_stop = hp100_close,
432 .ndo_start_xmit = hp100_start_xmit_bm,
433 .ndo_get_stats = hp100_get_stats,
434 .ndo_set_multicast_list = hp100_set_multicast_list,
435 .ndo_change_mtu = eth_change_mtu,
436 .ndo_set_mac_address = eth_mac_addr,
437 .ndo_validate_addr = eth_validate_addr,
438};
439
440static const struct net_device_ops hp100_netdev_ops = {
441 .ndo_open = hp100_open,
442 .ndo_stop = hp100_close,
443 .ndo_start_xmit = hp100_start_xmit,
444 .ndo_get_stats = hp100_get_stats,
445 .ndo_set_multicast_list = hp100_set_multicast_list,
446 .ndo_change_mtu = eth_change_mtu,
447 .ndo_set_mac_address = eth_mac_addr,
448 .ndo_validate_addr = eth_validate_addr,
449};
450
Linus Torvalds1da177e2005-04-16 15:20:36 -0700451static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
452 u_char bus, struct pci_dev *pci_dev)
453{
454 int i;
455 int err = -ENODEV;
456 const char *eid;
457 u_int chip;
458 u_char uc;
459 u_int memory_size = 0, virt_memory_size = 0;
460 u_short local_mode, lsw;
461 short mem_mapped;
462 unsigned long mem_ptr_phys;
463 void __iomem *mem_ptr_virt;
464 struct hp100_private *lp;
465
466#ifdef HP100_DEBUG_B
467 hp100_outw(0x4201, TRACE);
468 printk("hp100: %s: probe1\n", dev->name);
469#endif
470
471 /* memory region for programmed i/o */
472 if (!request_region(ioaddr, HP100_REGION_SIZE, "hp100"))
473 goto out1;
474
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400475 if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700476 goto out2;
477
478 chip = hp100_inw(PAGING) & HP100_CHIPID_MASK;
479#ifdef HP100_DEBUG
480 if (chip == HP100_CHIPID_SHASTA)
481 printk("hp100: %s: Shasta Chip detected. (This is a pre 802.12 chip)\n", dev->name);
482 else if (chip == HP100_CHIPID_RAINIER)
483 printk("hp100: %s: Rainier Chip detected. (This is a pre 802.12 chip)\n", dev->name);
484 else if (chip == HP100_CHIPID_LASSEN)
485 printk("hp100: %s: Lassen Chip detected.\n", dev->name);
486 else
487 printk("hp100: %s: Warning: Unknown CASCADE chip (id=0x%.4x).\n", dev->name, chip);
488#endif
489
490 dev->base_addr = ioaddr;
491
492 eid = hp100_read_id(ioaddr);
493 if (eid == NULL) { /* bad checksum? */
494 printk(KERN_WARNING "hp100_probe: bad ID checksum at base port 0x%x\n", ioaddr);
495 goto out2;
496 }
497
498 hp100_page(ID_MAC_ADDR);
499 for (i = uc = 0; i < 7; i++)
500 uc += hp100_inb(LAN_ADDR + i);
501 if (uc != 0xff) {
502 printk(KERN_WARNING "hp100_probe: bad lan address checksum at port 0x%x)\n", ioaddr);
503 err = -EIO;
504 goto out2;
505 }
506
507 /* Make sure, that all registers are correctly updated... */
508
509 hp100_load_eeprom(dev, ioaddr);
510 wait();
511
512 /*
513 * Determine driver operation mode
514 *
515 * Use the variable "hp100_mode" upon insmod or as kernel parameter to
516 * force driver modes:
517 * hp100_mode=1 -> default, use busmaster mode if configured.
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400518 * hp100_mode=2 -> enable shared memory mode
Linus Torvalds1da177e2005-04-16 15:20:36 -0700519 * hp100_mode=3 -> force use of i/o mapped mode.
520 * hp100_mode=4 -> same as 1, but re-set the enable bit on the card.
521 */
522
523 /*
524 * LSW values:
525 * 0x2278 -> J2585B, PnP shared memory mode
526 * 0x2270 -> J2585B, shared memory mode, 0xdc000
527 * 0xa23c -> J2585B, I/O mapped mode
528 * 0x2240 -> EISA COMPEX, BusMaster (Shasta Chip)
529 * 0x2220 -> EISA HP, I/O (Shasta Chip)
530 * 0x2260 -> EISA HP, BusMaster (Shasta Chip)
531 */
532
533#if 0
534 local_mode = 0x2270;
535 hp100_outw(0xfefe, OPTION_LSW);
536 hp100_outw(local_mode | HP100_SET_LB | HP100_SET_HB, OPTION_LSW);
537#endif
538
539 /* hp100_mode value maybe used in future by another card */
540 local_mode = hp100_mode;
541 if (local_mode < 1 || local_mode > 4)
542 local_mode = 1; /* default */
543#ifdef HP100_DEBUG
544 printk("hp100: %s: original LSW = 0x%x\n", dev->name,
545 hp100_inw(OPTION_LSW));
546#endif
547
548 if (local_mode == 3) {
549 hp100_outw(HP100_MEM_EN | HP100_RESET_LB, OPTION_LSW);
550 hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
551 hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_RESET_HB, OPTION_LSW);
552 printk("hp100: IO mapped mode forced.\n");
553 } else if (local_mode == 2) {
554 hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW);
555 hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
556 hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_RESET_HB, OPTION_LSW);
557 printk("hp100: Shared memory mode requested.\n");
558 } else if (local_mode == 4) {
559 if (chip == HP100_CHIPID_LASSEN) {
560 hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_SET_HB, OPTION_LSW);
561 hp100_outw(HP100_IO_EN | HP100_MEM_EN | HP100_RESET_LB, OPTION_LSW);
562 printk("hp100: Busmaster mode requested.\n");
563 }
564 local_mode = 1;
565 }
566
567 if (local_mode == 1) { /* default behaviour */
568 lsw = hp100_inw(OPTION_LSW);
569
570 if ((lsw & HP100_IO_EN) && (~lsw & HP100_MEM_EN) &&
571 (~lsw & (HP100_BM_WRITE | HP100_BM_READ))) {
572#ifdef HP100_DEBUG
573 printk("hp100: %s: IO_EN bit is set on card.\n", dev->name);
574#endif
575 local_mode = 3;
576 } else if (chip == HP100_CHIPID_LASSEN &&
577 (lsw & (HP100_BM_WRITE | HP100_BM_READ)) == (HP100_BM_WRITE | HP100_BM_READ)) {
578 /* Conversion to new PCI API :
579 * I don't have the doc, but I assume that the card
580 * can map the full 32bit address space.
581 * Also, we can have EISA Busmaster cards (not tested),
582 * so beware !!! - Jean II */
583 if((bus == HP100_BUS_PCI) &&
Yang Hongyang284901a2009-04-06 19:01:15 -0700584 (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700585 /* Gracefully fallback to shared memory */
586 goto busmasterfail;
587 }
588 printk("hp100: Busmaster mode enabled.\n");
589 hp100_outw(HP100_MEM_EN | HP100_IO_EN | HP100_RESET_LB, OPTION_LSW);
590 } else {
591 busmasterfail:
592#ifdef HP100_DEBUG
593 printk("hp100: %s: Card not configured for BM or BM not supported with this card.\n", dev->name);
594 printk("hp100: %s: Trying shared memory mode.\n", dev->name);
595#endif
596 /* In this case, try shared memory mode */
597 local_mode = 2;
598 hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW);
599 /* hp100_outw(HP100_IO_EN|HP100_RESET_LB, OPTION_LSW); */
600 }
601 }
602#ifdef HP100_DEBUG
603 printk("hp100: %s: new LSW = 0x%x\n", dev->name, hp100_inw(OPTION_LSW));
604#endif
605
606 /* Check for shared memory on the card, eventually remap it */
607 hp100_page(HW_MAP);
608 mem_mapped = ((hp100_inw(OPTION_LSW) & (HP100_MEM_EN)) != 0);
609 mem_ptr_phys = 0UL;
610 mem_ptr_virt = NULL;
611 memory_size = (8192 << ((hp100_inb(SRAM) >> 5) & 0x07));
612 virt_memory_size = 0;
613
614 /* For memory mapped or busmaster mode, we want the memory address */
615 if (mem_mapped || (local_mode == 1)) {
616 mem_ptr_phys = (hp100_inw(MEM_MAP_LSW) | (hp100_inw(MEM_MAP_MSW) << 16));
617 mem_ptr_phys &= ~0x1fff; /* 8k alignment */
618
619 if (bus == HP100_BUS_ISA && (mem_ptr_phys & ~0xfffff) != 0) {
620 printk("hp100: Can only use programmed i/o mode.\n");
621 mem_ptr_phys = 0;
622 mem_mapped = 0;
623 local_mode = 3; /* Use programmed i/o */
624 }
625
626 /* We do not need access to shared memory in busmaster mode */
627 /* However in slave mode we need to remap high (>1GB) card memory */
628 if (local_mode != 1) { /* = not busmaster */
629 /* We try with smaller memory sizes, if ioremap fails */
630 for (virt_memory_size = memory_size; virt_memory_size > 16383; virt_memory_size >>= 1) {
631 if ((mem_ptr_virt = ioremap((u_long) mem_ptr_phys, virt_memory_size)) == NULL) {
632#ifdef HP100_DEBUG
633 printk("hp100: %s: ioremap for 0x%x bytes high PCI memory at 0x%lx failed\n", dev->name, virt_memory_size, mem_ptr_phys);
634#endif
635 } else {
636#ifdef HP100_DEBUG
637 printk("hp100: %s: remapped 0x%x bytes high PCI memory at 0x%lx to %p.\n", dev->name, virt_memory_size, mem_ptr_phys, mem_ptr_virt);
638#endif
639 break;
640 }
641 }
642
643 if (mem_ptr_virt == NULL) { /* all ioremap tries failed */
644 printk("hp100: Failed to ioremap the PCI card memory. Will have to use i/o mapped mode.\n");
645 local_mode = 3;
646 virt_memory_size = 0;
647 }
648 }
649 }
650
651 if (local_mode == 3) { /* io mapped forced */
652 mem_mapped = 0;
653 mem_ptr_phys = 0;
654 mem_ptr_virt = NULL;
655 printk("hp100: Using (slow) programmed i/o mode.\n");
656 }
657
658 /* Initialise the "private" data structure for this card. */
659 lp = netdev_priv(dev);
660
661 spin_lock_init(&lp->lock);
662 strlcpy(lp->id, eid, HP100_SIG_LEN);
663 lp->chip = chip;
664 lp->mode = local_mode;
665 lp->bus = bus;
666 lp->pci_dev = pci_dev;
667 lp->priority_tx = hp100_priority_tx;
668 lp->rx_ratio = hp100_rx_ratio;
669 lp->mem_ptr_phys = mem_ptr_phys;
670 lp->mem_ptr_virt = mem_ptr_virt;
671 hp100_page(ID_MAC_ADDR);
672 lp->soft_model = hp100_inb(SOFT_MODEL);
673 lp->mac1_mode = HP100_MAC1MODE3;
674 lp->mac2_mode = HP100_MAC2MODE3;
675 memset(&lp->hash_bytes, 0x00, 8);
676
677 dev->base_addr = ioaddr;
678
679 lp->memory_size = memory_size;
680 lp->virt_memory_size = virt_memory_size;
681 lp->rx_ratio = hp100_rx_ratio; /* can be conf'd with insmod */
682
Linus Torvalds1da177e2005-04-16 15:20:36 -0700683 if (lp->mode == 1) /* busmaster */
Stephen Hemmingerd9d6f462009-01-07 18:13:49 -0800684 dev->netdev_ops = &hp100_bm_netdev_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700685 else
Stephen Hemmingerd9d6f462009-01-07 18:13:49 -0800686 dev->netdev_ops = &hp100_netdev_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700687
688 /* Ask the card for which IRQ line it is configured */
689 if (bus == HP100_BUS_PCI) {
690 dev->irq = pci_dev->irq;
691 } else {
692 hp100_page(HW_MAP);
693 dev->irq = hp100_inb(IRQ_CHANNEL) & HP100_IRQMASK;
694 if (dev->irq == 2)
695 dev->irq = 9;
696 }
697
698 if (lp->mode == 1) /* busmaster */
699 dev->dma = 4;
700
701 /* Ask the card for its MAC address and store it for later use. */
702 hp100_page(ID_MAC_ADDR);
703 for (i = uc = 0; i < 6; i++)
704 dev->dev_addr[i] = hp100_inb(LAN_ADDR + i);
705
706 /* Reset statistics (counters) */
707 hp100_clear_stats(lp, ioaddr);
708
709 /* If busmaster mode is wanted, a dma-capable memory area is needed for
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400710 * the rx and tx PDLs
Linus Torvalds1da177e2005-04-16 15:20:36 -0700711 * PCI cards can access the whole PC memory. Therefore GFP_DMA is not
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400712 * needed for the allocation of the memory area.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700713 */
714
715 /* TODO: We do not need this with old cards, where PDLs are stored
716 * in the cards shared memory area. But currently, busmaster has been
717 * implemented/tested only with the lassen chip anyway... */
718 if (lp->mode == 1) { /* busmaster */
719 dma_addr_t page_baddr;
720 /* Get physically continous memory for TX & RX PDLs */
721 /* Conversion to new PCI API :
722 * Pages are always aligned and zeroed, no need to it ourself.
723 * Doc says should be OK for EISA bus as well - Jean II */
724 if ((lp->page_vaddr_algn = pci_alloc_consistent(lp->pci_dev, MAX_RINGSIZE, &page_baddr)) == NULL) {
725 err = -ENOMEM;
726 goto out2;
727 }
728 lp->whatever_offset = ((u_long) page_baddr) - ((u_long) lp->page_vaddr_algn);
729
730#ifdef HP100_DEBUG_BM
731 printk("hp100: %s: Reserved DMA memory from 0x%x to 0x%x\n", dev->name, (u_int) lp->page_vaddr_algn, (u_int) lp->page_vaddr_algn + MAX_RINGSIZE);
732#endif
733 lp->rxrcommit = lp->txrcommit = 0;
734 lp->rxrhead = lp->rxrtail = &(lp->rxring[0]);
735 lp->txrhead = lp->txrtail = &(lp->txring[0]);
736 }
737
738 /* Initialise the card. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400739 /* (I'm not really sure if it's a good idea to do this during probing, but
Linus Torvalds1da177e2005-04-16 15:20:36 -0700740 * like this it's assured that the lan connection type can be sensed
741 * correctly)
742 */
743 hp100_hwinit(dev);
744
745 /* Try to find out which kind of LAN the card is connected to. */
746 lp->lan_type = hp100_sense_lan(dev);
747
748 /* Print out a message what about what we think we have probed. */
749 printk("hp100: at 0x%x, IRQ %d, ", ioaddr, dev->irq);
750 switch (bus) {
751 case HP100_BUS_EISA:
752 printk("EISA");
753 break;
754 case HP100_BUS_PCI:
755 printk("PCI");
756 break;
757 default:
758 printk("ISA");
759 break;
760 }
761 printk(" bus, %dk SRAM (rx/tx %d%%).\n", lp->memory_size >> 10, lp->rx_ratio);
762
763 if (lp->mode == 2) { /* memory mapped */
764 printk("hp100: Memory area at 0x%lx-0x%lx", mem_ptr_phys,
765 (mem_ptr_phys + (mem_ptr_phys > 0x100000 ? (u_long) lp->memory_size : 16 * 1024)) - 1);
766 if (mem_ptr_virt)
767 printk(" (virtual base %p)", mem_ptr_virt);
768 printk(".\n");
769
770 /* Set for info when doing ifconfig */
771 dev->mem_start = mem_ptr_phys;
772 dev->mem_end = mem_ptr_phys + lp->memory_size;
773 }
774
775 printk("hp100: ");
776 if (lp->lan_type != HP100_LAN_ERR)
777 printk("Adapter is attached to ");
778 switch (lp->lan_type) {
779 case HP100_LAN_100:
780 printk("100Mb/s Voice Grade AnyLAN network.\n");
781 break;
782 case HP100_LAN_10:
783 printk("10Mb/s network (10baseT).\n");
784 break;
785 case HP100_LAN_COAX:
786 printk("10Mb/s network (coax).\n");
787 break;
788 default:
789 printk("Warning! Link down.\n");
790 }
791
b1fc5502005-05-12 20:11:55 -0400792 err = register_netdev(dev);
793 if (err)
794 goto out3;
795
Linus Torvalds1da177e2005-04-16 15:20:36 -0700796 return 0;
b1fc5502005-05-12 20:11:55 -0400797out3:
798 if (local_mode == 1)
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400799 pci_free_consistent(lp->pci_dev, MAX_RINGSIZE + 0x0f,
800 lp->page_vaddr_algn,
b1fc5502005-05-12 20:11:55 -0400801 virt_to_whatever(dev, lp->page_vaddr_algn));
802 if (mem_ptr_virt)
803 iounmap(mem_ptr_virt);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700804out2:
805 release_region(ioaddr, HP100_REGION_SIZE);
806out1:
b1fc5502005-05-12 20:11:55 -0400807 return err;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700808}
809
810/* This procedure puts the card into a stable init state */
811static void hp100_hwinit(struct net_device *dev)
812{
813 int ioaddr = dev->base_addr;
814 struct hp100_private *lp = netdev_priv(dev);
815
816#ifdef HP100_DEBUG_B
817 hp100_outw(0x4202, TRACE);
818 printk("hp100: %s: hwinit\n", dev->name);
819#endif
820
821 /* Initialise the card. -------------------------------------------- */
822
823 /* Clear all pending Ints and disable Ints */
824 hp100_page(PERFORMANCE);
825 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
826 hp100_outw(0xffff, IRQ_STATUS); /* clear all pending ints */
827
828 hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
829 hp100_outw(HP100_TRI_INT | HP100_SET_HB, OPTION_LSW);
830
831 if (lp->mode == 1) {
832 hp100_BM_shutdown(dev); /* disables BM, puts cascade in reset */
833 wait();
834 } else {
835 hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
836 hp100_cascade_reset(dev, 1);
837 hp100_page(MAC_CTRL);
838 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1);
839 }
840
841 /* Initiate EEPROM reload */
842 hp100_load_eeprom(dev, 0);
843
844 wait();
845
846 /* Go into reset again. */
847 hp100_cascade_reset(dev, 1);
848
849 /* Set Option Registers to a safe state */
850 hp100_outw(HP100_DEBUG_EN |
851 HP100_RX_HDR |
852 HP100_EE_EN |
853 HP100_BM_WRITE |
854 HP100_BM_READ | HP100_RESET_HB |
855 HP100_FAKE_INT |
856 HP100_INT_EN |
857 HP100_MEM_EN |
858 HP100_IO_EN | HP100_RESET_LB, OPTION_LSW);
859
860 hp100_outw(HP100_TRI_INT |
861 HP100_MMAP_DIS | HP100_SET_HB, OPTION_LSW);
862
863 hp100_outb(HP100_PRIORITY_TX |
864 HP100_ADV_NXT_PKT |
865 HP100_TX_CMD | HP100_RESET_LB, OPTION_MSW);
866
867 /* TODO: Configure MMU for Ram Test. */
868 /* TODO: Ram Test. */
869
870 /* Re-check if adapter is still at same i/o location */
871 /* (If the base i/o in eeprom has been changed but the */
872 /* registers had not been changed, a reload of the eeprom */
873 /* would move the adapter to the address stored in eeprom */
874
875 /* TODO: Code to implement. */
876
877 /* Until here it was code from HWdiscover procedure. */
878 /* Next comes code from mmuinit procedure of SCO BM driver which is
879 * called from HWconfigure in the SCO driver. */
880
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400881 /* Initialise MMU, eventually switch on Busmaster Mode, initialise
Linus Torvalds1da177e2005-04-16 15:20:36 -0700882 * multicast filter...
883 */
884 hp100_mmuinit(dev);
885
886 /* We don't turn the interrupts on here - this is done by start_interface. */
887 wait(); /* TODO: Do we really need this? */
888
889 /* Enable Hardware (e.g. unreset) */
890 hp100_cascade_reset(dev, 0);
891
892 /* ------- initialisation complete ----------- */
893
894 /* Finally try to log in the Hub if there may be a VG connection. */
895 if ((lp->lan_type == HP100_LAN_100) || (lp->lan_type == HP100_LAN_ERR))
896 hp100_login_to_vg_hub(dev, 0); /* relogin */
897
898}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700899
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400900
901/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700902 * mmuinit - Reinitialise Cascade MMU and MAC settings.
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400903 * Note: Must already be in reset and leaves card in reset.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700904 */
905static void hp100_mmuinit(struct net_device *dev)
906{
907 int ioaddr = dev->base_addr;
908 struct hp100_private *lp = netdev_priv(dev);
909 int i;
910
911#ifdef HP100_DEBUG_B
912 hp100_outw(0x4203, TRACE);
913 printk("hp100: %s: mmuinit\n", dev->name);
914#endif
915
916#ifdef HP100_DEBUG
917 if (0 != (hp100_inw(OPTION_LSW) & HP100_HW_RST)) {
918 printk("hp100: %s: Not in reset when entering mmuinit. Fix me.\n", dev->name);
919 return;
920 }
921#endif
922
923 /* Make sure IRQs are masked off and ack'ed. */
924 hp100_page(PERFORMANCE);
925 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
926 hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
927
928 /*
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400929 * Enable Hardware
Linus Torvalds1da177e2005-04-16 15:20:36 -0700930 * - Clear Debug En, Rx Hdr Pipe, EE En, I/O En, Fake Int and Intr En
931 * - Set Tri-State Int, Bus Master Rd/Wr, and Mem Map Disable
932 * - Clear Priority, Advance Pkt and Xmit Cmd
933 */
934
935 hp100_outw(HP100_DEBUG_EN |
936 HP100_RX_HDR |
937 HP100_EE_EN | HP100_RESET_HB |
938 HP100_IO_EN |
939 HP100_FAKE_INT |
940 HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
941
942 hp100_outw(HP100_TRI_INT | HP100_SET_HB, OPTION_LSW);
943
944 if (lp->mode == 1) { /* busmaster */
945 hp100_outw(HP100_BM_WRITE |
946 HP100_BM_READ |
947 HP100_MMAP_DIS | HP100_SET_HB, OPTION_LSW);
948 } else if (lp->mode == 2) { /* memory mapped */
949 hp100_outw(HP100_BM_WRITE |
950 HP100_BM_READ | HP100_RESET_HB, OPTION_LSW);
951 hp100_outw(HP100_MMAP_DIS | HP100_RESET_HB, OPTION_LSW);
952 hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW);
953 hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
954 } else if (lp->mode == 3) { /* i/o mapped mode */
955 hp100_outw(HP100_MMAP_DIS | HP100_SET_HB |
956 HP100_IO_EN | HP100_SET_LB, OPTION_LSW);
957 }
958
959 hp100_page(HW_MAP);
960 hp100_outb(0, EARLYRXCFG);
961 hp100_outw(0, EARLYTXCFG);
962
963 /*
964 * Enable Bus Master mode
965 */
966 if (lp->mode == 1) { /* busmaster */
967 /* Experimental: Set some PCI configuration bits */
968 hp100_page(HW_MAP);
969 hp100_andb(~HP100_PDL_USE3, MODECTRL1); /* BM engine read maximum */
970 hp100_andb(~HP100_TX_DUALQ, MODECTRL1); /* No Queue for Priority TX */
971
972 /* PCI Bus failures should result in a Misc. Interrupt */
973 hp100_orb(HP100_EN_BUS_FAIL, MODECTRL2);
974
975 hp100_outw(HP100_BM_READ | HP100_BM_WRITE | HP100_SET_HB, OPTION_LSW);
976 hp100_page(HW_MAP);
977 /* Use Burst Mode and switch on PAGE_CK */
978 hp100_orb(HP100_BM_BURST_RD | HP100_BM_BURST_WR, BM);
979 if ((lp->chip == HP100_CHIPID_RAINIER) || (lp->chip == HP100_CHIPID_SHASTA))
980 hp100_orb(HP100_BM_PAGE_CK, BM);
981 hp100_orb(HP100_BM_MASTER, BM);
982 } else { /* not busmaster */
983
984 hp100_page(HW_MAP);
985 hp100_andb(~HP100_BM_MASTER, BM);
986 }
987
988 /*
989 * Divide card memory into regions for Rx, Tx and, if non-ETR chip, PDLs
990 */
991 hp100_page(MMU_CFG);
992 if (lp->mode == 1) { /* only needed for Busmaster */
993 int xmit_stop, recv_stop;
994
Joe Perches8e95a202009-12-03 07:58:21 +0000995 if ((lp->chip == HP100_CHIPID_RAINIER) ||
996 (lp->chip == HP100_CHIPID_SHASTA)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700997 int pdl_stop;
998
999 /*
1000 * Each pdl is 508 bytes long. (63 frags * 4 bytes for address and
1001 * 4 bytes for header). We will leave NUM_RXPDLS * 508 (rounded
1002 * to the next higher 1k boundary) bytes for the rx-pdl's
1003 * Note: For non-etr chips the transmit stop register must be
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001004 * programmed on a 1k boundary, i.e. bits 9:0 must be zero.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001005 */
1006 pdl_stop = lp->memory_size;
1007 xmit_stop = (pdl_stop - 508 * (MAX_RX_PDL) - 16) & ~(0x03ff);
1008 recv_stop = (xmit_stop * (lp->rx_ratio) / 100) & ~(0x03ff);
1009 hp100_outw((pdl_stop >> 4) - 1, PDL_MEM_STOP);
1010#ifdef HP100_DEBUG_BM
1011 printk("hp100: %s: PDL_STOP = 0x%x\n", dev->name, pdl_stop);
1012#endif
1013 } else {
1014 /* ETR chip (Lassen) in busmaster mode */
1015 xmit_stop = (lp->memory_size) - 1;
1016 recv_stop = ((lp->memory_size * lp->rx_ratio) / 100) & ~(0x03ff);
1017 }
1018
1019 hp100_outw(xmit_stop >> 4, TX_MEM_STOP);
1020 hp100_outw(recv_stop >> 4, RX_MEM_STOP);
1021#ifdef HP100_DEBUG_BM
1022 printk("hp100: %s: TX_STOP = 0x%x\n", dev->name, xmit_stop >> 4);
1023 printk("hp100: %s: RX_STOP = 0x%x\n", dev->name, recv_stop >> 4);
1024#endif
1025 } else {
1026 /* Slave modes (memory mapped and programmed io) */
1027 hp100_outw((((lp->memory_size * lp->rx_ratio) / 100) >> 4), RX_MEM_STOP);
1028 hp100_outw(((lp->memory_size - 1) >> 4), TX_MEM_STOP);
1029#ifdef HP100_DEBUG
1030 printk("hp100: %s: TX_MEM_STOP: 0x%x\n", dev->name, hp100_inw(TX_MEM_STOP));
1031 printk("hp100: %s: RX_MEM_STOP: 0x%x\n", dev->name, hp100_inw(RX_MEM_STOP));
1032#endif
1033 }
1034
1035 /* Write MAC address into page 1 */
1036 hp100_page(MAC_ADDRESS);
1037 for (i = 0; i < 6; i++)
1038 hp100_outb(dev->dev_addr[i], MAC_ADDR + i);
1039
1040 /* Zero the multicast hash registers */
1041 for (i = 0; i < 8; i++)
1042 hp100_outb(0x0, HASH_BYTE0 + i);
1043
1044 /* Set up MAC defaults */
1045 hp100_page(MAC_CTRL);
1046
1047 /* Go to LAN Page and zero all filter bits */
1048 /* Zero accept error, accept multicast, accept broadcast and accept */
1049 /* all directed packet bits */
1050 hp100_andb(~(HP100_RX_EN |
1051 HP100_TX_EN |
1052 HP100_ACC_ERRORED |
1053 HP100_ACC_MC |
1054 HP100_ACC_BC | HP100_ACC_PHY), MAC_CFG_1);
1055
1056 hp100_outb(0x00, MAC_CFG_2);
1057
1058 /* Zero the frame format bit. This works around a training bug in the */
1059 /* new hubs. */
1060 hp100_outb(0x00, VG_LAN_CFG_2); /* (use 802.3) */
1061
1062 if (lp->priority_tx)
1063 hp100_outb(HP100_PRIORITY_TX | HP100_SET_LB, OPTION_MSW);
1064 else
1065 hp100_outb(HP100_PRIORITY_TX | HP100_RESET_LB, OPTION_MSW);
1066
1067 hp100_outb(HP100_ADV_NXT_PKT |
1068 HP100_TX_CMD | HP100_RESET_LB, OPTION_MSW);
1069
1070 /* If busmaster, initialize the PDLs */
1071 if (lp->mode == 1)
1072 hp100_init_pdls(dev);
1073
1074 /* Go to performance page and initalize isr and imr registers */
1075 hp100_page(PERFORMANCE);
1076 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
1077 hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
1078}
1079
1080/*
1081 * open/close functions
1082 */
1083
1084static int hp100_open(struct net_device *dev)
1085{
1086 struct hp100_private *lp = netdev_priv(dev);
1087#ifdef HP100_DEBUG_B
1088 int ioaddr = dev->base_addr;
1089#endif
1090
1091#ifdef HP100_DEBUG_B
1092 hp100_outw(0x4204, TRACE);
1093 printk("hp100: %s: open\n", dev->name);
1094#endif
1095
1096 /* New: if bus is PCI or EISA, interrupts might be shared interrupts */
1097 if (request_irq(dev->irq, hp100_interrupt,
1098 lp->bus == HP100_BUS_PCI || lp->bus ==
Thomas Gleixner1fb9df52006-07-01 19:29:39 -07001099 HP100_BUS_EISA ? IRQF_SHARED : IRQF_DISABLED,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001100 "hp100", dev)) {
1101 printk("hp100: %s: unable to get IRQ %d\n", dev->name, dev->irq);
1102 return -EAGAIN;
1103 }
1104
1105 dev->trans_start = jiffies;
1106 netif_start_queue(dev);
1107
1108 lp->lan_type = hp100_sense_lan(dev);
1109 lp->mac1_mode = HP100_MAC1MODE3;
1110 lp->mac2_mode = HP100_MAC2MODE3;
1111 memset(&lp->hash_bytes, 0x00, 8);
1112
1113 hp100_stop_interface(dev);
1114
1115 hp100_hwinit(dev);
1116
1117 hp100_start_interface(dev); /* sets mac modes, enables interrupts */
1118
1119 return 0;
1120}
1121
1122/* The close function is called when the interface is to be brought down */
1123static int hp100_close(struct net_device *dev)
1124{
1125 int ioaddr = dev->base_addr;
1126 struct hp100_private *lp = netdev_priv(dev);
1127
1128#ifdef HP100_DEBUG_B
1129 hp100_outw(0x4205, TRACE);
1130 printk("hp100: %s: close\n", dev->name);
1131#endif
1132
1133 hp100_page(PERFORMANCE);
1134 hp100_outw(0xfefe, IRQ_MASK); /* mask off all IRQs */
1135
1136 hp100_stop_interface(dev);
1137
1138 if (lp->lan_type == HP100_LAN_100)
1139 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1140
1141 netif_stop_queue(dev);
1142
1143 free_irq(dev->irq, dev);
1144
1145#ifdef HP100_DEBUG
1146 printk("hp100: %s: close LSW = 0x%x\n", dev->name,
1147 hp100_inw(OPTION_LSW));
1148#endif
1149
1150 return 0;
1151}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001152
Linus Torvalds1da177e2005-04-16 15:20:36 -07001153
1154/*
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001155 * Configure the PDL Rx rings and LAN
Linus Torvalds1da177e2005-04-16 15:20:36 -07001156 */
1157static void hp100_init_pdls(struct net_device *dev)
1158{
1159 struct hp100_private *lp = netdev_priv(dev);
1160 hp100_ring_t *ringptr;
1161 u_int *pageptr; /* Warning : increment by 4 - Jean II */
1162 int i;
1163
1164#ifdef HP100_DEBUG_B
1165 int ioaddr = dev->base_addr;
1166#endif
1167
1168#ifdef HP100_DEBUG_B
1169 hp100_outw(0x4206, TRACE);
1170 printk("hp100: %s: init pdls\n", dev->name);
1171#endif
1172
Al Viro79ea13c2008-01-24 02:06:46 -08001173 if (!lp->page_vaddr_algn)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001174 printk("hp100: %s: Warning: lp->page_vaddr_algn not initialised!\n", dev->name);
1175 else {
1176 /* pageptr shall point into the DMA accessible memory region */
1177 /* we use this pointer to status the upper limit of allocated */
1178 /* memory in the allocated page. */
1179 /* note: align the pointers to the pci cache line size */
1180 memset(lp->page_vaddr_algn, 0, MAX_RINGSIZE); /* Zero Rx/Tx ring page */
1181 pageptr = lp->page_vaddr_algn;
1182
1183 lp->rxrcommit = 0;
1184 ringptr = lp->rxrhead = lp->rxrtail = &(lp->rxring[0]);
1185
1186 /* Initialise Rx Ring */
1187 for (i = MAX_RX_PDL - 1; i >= 0; i--) {
1188 lp->rxring[i].next = ringptr;
1189 ringptr = &(lp->rxring[i]);
1190 pageptr += hp100_init_rxpdl(dev, ringptr, pageptr);
1191 }
1192
1193 /* Initialise Tx Ring */
1194 lp->txrcommit = 0;
1195 ringptr = lp->txrhead = lp->txrtail = &(lp->txring[0]);
1196 for (i = MAX_TX_PDL - 1; i >= 0; i--) {
1197 lp->txring[i].next = ringptr;
1198 ringptr = &(lp->txring[i]);
1199 pageptr += hp100_init_txpdl(dev, ringptr, pageptr);
1200 }
1201 }
1202}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001203
Linus Torvalds1da177e2005-04-16 15:20:36 -07001204
1205/* These functions "format" the entries in the pdl structure */
1206/* They return how much memory the fragments need. */
1207static int hp100_init_rxpdl(struct net_device *dev,
1208 register hp100_ring_t * ringptr,
1209 register u32 * pdlptr)
1210{
1211 /* pdlptr is starting address for this pdl */
1212
1213 if (0 != (((unsigned long) pdlptr) & 0xf))
1214 printk("hp100: %s: Init rxpdl: Unaligned pdlptr 0x%lx.\n",
1215 dev->name, (unsigned long) pdlptr);
1216
1217 ringptr->pdl = pdlptr + 1;
1218 ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr + 1);
1219 ringptr->skb = (void *) NULL;
1220
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001221 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001222 * Write address and length of first PDL Fragment (which is used for
1223 * storing the RX-Header
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001224 * We use the 4 bytes _before_ the PDH in the pdl memory area to
Linus Torvalds1da177e2005-04-16 15:20:36 -07001225 * store this information. (PDH is at offset 0x04)
1226 */
1227 /* Note that pdlptr+1 and not pdlptr is the pointer to the PDH */
1228
1229 *(pdlptr + 2) = (u_int) virt_to_whatever(dev, pdlptr); /* Address Frag 1 */
1230 *(pdlptr + 3) = 4; /* Length Frag 1 */
1231
Ilpo Järvinenc40cf512008-12-16 01:14:21 -08001232 return roundup(MAX_RX_FRAG * 2 + 2, 4);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001233}
1234
1235
1236static int hp100_init_txpdl(struct net_device *dev,
1237 register hp100_ring_t * ringptr,
1238 register u32 * pdlptr)
1239{
1240 if (0 != (((unsigned long) pdlptr) & 0xf))
1241 printk("hp100: %s: Init txpdl: Unaligned pdlptr 0x%lx.\n", dev->name, (unsigned long) pdlptr);
1242
1243 ringptr->pdl = pdlptr; /* +1; */
1244 ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr); /* +1 */
1245 ringptr->skb = (void *) NULL;
1246
Ilpo Järvinenc40cf512008-12-16 01:14:21 -08001247 return roundup(MAX_TX_FRAG * 2 + 2, 4);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001248}
1249
1250/*
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001251 * hp100_build_rx_pdl allocates an skb_buff of maximum size plus two bytes
Linus Torvalds1da177e2005-04-16 15:20:36 -07001252 * for possible odd word alignment rounding up to next dword and set PDL
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001253 * address for fragment#2
Linus Torvalds1da177e2005-04-16 15:20:36 -07001254 * Returns: 0 if unable to allocate skb_buff
1255 * 1 if successful
1256 */
1257static int hp100_build_rx_pdl(hp100_ring_t * ringptr,
1258 struct net_device *dev)
1259{
1260#ifdef HP100_DEBUG_B
1261 int ioaddr = dev->base_addr;
1262#endif
1263#ifdef HP100_DEBUG_BM
1264 u_int *p;
1265#endif
1266
1267#ifdef HP100_DEBUG_B
1268 hp100_outw(0x4207, TRACE);
1269 printk("hp100: %s: build rx pdl\n", dev->name);
1270#endif
1271
1272 /* Allocate skb buffer of maximum size */
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001273 /* Note: This depends on the alloc_skb functions allocating more
Linus Torvalds1da177e2005-04-16 15:20:36 -07001274 * space than requested, i.e. aligning to 16bytes */
1275
Ilpo Järvinenc40cf512008-12-16 01:14:21 -08001276 ringptr->skb = dev_alloc_skb(roundup(MAX_ETHER_SIZE + 2, 4));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001277
1278 if (NULL != ringptr->skb) {
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001279 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001280 * Reserve 2 bytes at the head of the buffer to land the IP header
1281 * on a long word boundary (According to the Network Driver section
1282 * in the Linux KHG, this should help to increase performance.)
1283 */
1284 skb_reserve(ringptr->skb, 2);
1285
1286 ringptr->skb->dev = dev;
1287 ringptr->skb->data = (u_char *) skb_put(ringptr->skb, MAX_ETHER_SIZE);
1288
1289 /* ringptr->pdl points to the beginning of the PDL, i.e. the PDH */
1290 /* Note: 1st Fragment is used for the 4 byte packet status
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001291 * (receive header). Its PDL entries are set up by init_rxpdl. So
Linus Torvalds1da177e2005-04-16 15:20:36 -07001292 * here we only have to set up the PDL fragment entries for the data
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001293 * part. Those 4 bytes will be stored in the DMA memory region
1294 * directly before the PDL.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001295 */
1296#ifdef HP100_DEBUG_BM
1297 printk("hp100: %s: build_rx_pdl: PDH@0x%x, skb->data (len %d) at 0x%x\n",
1298 dev->name, (u_int) ringptr->pdl,
Ilpo Järvinenc40cf512008-12-16 01:14:21 -08001299 roundup(MAX_ETHER_SIZE + 2, 4),
Linus Torvalds1da177e2005-04-16 15:20:36 -07001300 (unsigned int) ringptr->skb->data);
1301#endif
1302
1303 /* Conversion to new PCI API : map skbuf data to PCI bus.
1304 * Doc says it's OK for EISA as well - Jean II */
1305 ringptr->pdl[0] = 0x00020000; /* Write PDH */
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001306 ringptr->pdl[3] = pdl_map_data(netdev_priv(dev),
Linus Torvalds1da177e2005-04-16 15:20:36 -07001307 ringptr->skb->data);
1308 ringptr->pdl[4] = MAX_ETHER_SIZE; /* Length of Data */
1309
1310#ifdef HP100_DEBUG_BM
1311 for (p = (ringptr->pdl); p < (ringptr->pdl + 5); p++)
1312 printk("hp100: %s: Adr 0x%.8x = 0x%.8x\n", dev->name, (u_int) p, (u_int) * p);
1313#endif
1314 return (1);
1315 }
1316 /* else: */
1317 /* alloc_skb failed (no memory) -> still can receive the header
1318 * fragment into PDL memory. make PDL safe by clearing msgptr and
1319 * making the PDL only 1 fragment (i.e. the 4 byte packet status)
1320 */
1321#ifdef HP100_DEBUG_BM
1322 printk("hp100: %s: build_rx_pdl: PDH@0x%x, No space for skb.\n", dev->name, (u_int) ringptr->pdl);
1323#endif
1324
1325 ringptr->pdl[0] = 0x00010000; /* PDH: Count=1 Fragment */
1326
1327 return (0);
1328}
1329
1330/*
1331 * hp100_rxfill - attempt to fill the Rx Ring will empty skb's
1332 *
1333 * Makes assumption that skb's are always contiguous memory areas and
1334 * therefore PDLs contain only 2 physical fragments.
1335 * - While the number of Rx PDLs with buffers is less than maximum
1336 * a. Get a maximum packet size skb
1337 * b. Put the physical address of the buffer into the PDL.
1338 * c. Output physical address of PDL to adapter.
1339 */
1340static void hp100_rxfill(struct net_device *dev)
1341{
1342 int ioaddr = dev->base_addr;
1343
1344 struct hp100_private *lp = netdev_priv(dev);
1345 hp100_ring_t *ringptr;
1346
1347#ifdef HP100_DEBUG_B
1348 hp100_outw(0x4208, TRACE);
1349 printk("hp100: %s: rxfill\n", dev->name);
1350#endif
1351
1352 hp100_page(PERFORMANCE);
1353
1354 while (lp->rxrcommit < MAX_RX_PDL) {
1355 /*
1356 ** Attempt to get a buffer and build a Rx PDL.
1357 */
1358 ringptr = lp->rxrtail;
1359 if (0 == hp100_build_rx_pdl(ringptr, dev)) {
1360 return; /* None available, return */
1361 }
1362
1363 /* Hand this PDL over to the card */
1364 /* Note: This needs performance page selected! */
1365#ifdef HP100_DEBUG_BM
1366 printk("hp100: %s: rxfill: Hand to card: pdl #%d @0x%x phys:0x%x, buffer: 0x%x\n",
1367 dev->name, lp->rxrcommit, (u_int) ringptr->pdl,
1368 (u_int) ringptr->pdl_paddr, (u_int) ringptr->pdl[3]);
1369#endif
1370
1371 hp100_outl((u32) ringptr->pdl_paddr, RX_PDA);
1372
1373 lp->rxrcommit += 1;
1374 lp->rxrtail = ringptr->next;
1375 }
1376}
1377
1378/*
1379 * BM_shutdown - shutdown bus mastering and leave chip in reset state
1380 */
1381
1382static void hp100_BM_shutdown(struct net_device *dev)
1383{
1384 int ioaddr = dev->base_addr;
1385 struct hp100_private *lp = netdev_priv(dev);
1386 unsigned long time;
1387
1388#ifdef HP100_DEBUG_B
1389 hp100_outw(0x4209, TRACE);
1390 printk("hp100: %s: bm shutdown\n", dev->name);
1391#endif
1392
1393 hp100_page(PERFORMANCE);
1394 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
1395 hp100_outw(0xffff, IRQ_STATUS); /* Ack all ints */
1396
1397 /* Ensure Interrupts are off */
1398 hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW);
1399
1400 /* Disable all MAC activity */
1401 hp100_page(MAC_CTRL);
1402 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1); /* stop rx/tx */
1403
1404 /* If cascade MMU is not already in reset */
1405 if (0 != (hp100_inw(OPTION_LSW) & HP100_HW_RST)) {
1406 /* Wait 1.3ms (10Mb max packet time) to ensure MAC is idle so
1407 * MMU pointers will not be reset out from underneath
1408 */
1409 hp100_page(MAC_CTRL);
1410 for (time = 0; time < 5000; time++) {
1411 if ((hp100_inb(MAC_CFG_1) & (HP100_TX_IDLE | HP100_RX_IDLE)) == (HP100_TX_IDLE | HP100_RX_IDLE))
1412 break;
1413 }
1414
1415 /* Shutdown algorithm depends on the generation of Cascade */
1416 if (lp->chip == HP100_CHIPID_LASSEN) { /* ETR shutdown/reset */
1417 /* Disable Busmaster mode and wait for bit to go to zero. */
1418 hp100_page(HW_MAP);
1419 hp100_andb(~HP100_BM_MASTER, BM);
1420 /* 100 ms timeout */
1421 for (time = 0; time < 32000; time++) {
1422 if (0 == (hp100_inb(BM) & HP100_BM_MASTER))
1423 break;
1424 }
1425 } else { /* Shasta or Rainier Shutdown/Reset */
1426 /* To ensure all bus master inloading activity has ceased,
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001427 * wait for no Rx PDAs or no Rx packets on card.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001428 */
1429 hp100_page(PERFORMANCE);
1430 /* 100 ms timeout */
1431 for (time = 0; time < 10000; time++) {
1432 /* RX_PDL: PDLs not executed. */
1433 /* RX_PKT_CNT: RX'd packets on card. */
1434 if ((hp100_inb(RX_PDL) == 0) && (hp100_inb(RX_PKT_CNT) == 0))
1435 break;
1436 }
1437
1438 if (time >= 10000)
1439 printk("hp100: %s: BM shutdown error.\n", dev->name);
1440
1441 /* To ensure all bus master outloading activity has ceased,
1442 * wait until the Tx PDA count goes to zero or no more Tx space
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001443 * available in the Tx region of the card.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001444 */
1445 /* 100 ms timeout */
1446 for (time = 0; time < 10000; time++) {
1447 if ((0 == hp100_inb(TX_PKT_CNT)) &&
1448 (0 != (hp100_inb(TX_MEM_FREE) & HP100_AUTO_COMPARE)))
1449 break;
1450 }
1451
1452 /* Disable Busmaster mode */
1453 hp100_page(HW_MAP);
1454 hp100_andb(~HP100_BM_MASTER, BM);
1455 } /* end of shutdown procedure for non-etr parts */
1456
1457 hp100_cascade_reset(dev, 1);
1458 }
1459 hp100_page(PERFORMANCE);
1460 /* hp100_outw( HP100_BM_READ | HP100_BM_WRITE | HP100_RESET_HB, OPTION_LSW ); */
1461 /* Busmaster mode should be shut down now. */
1462}
1463
1464static int hp100_check_lan(struct net_device *dev)
1465{
1466 struct hp100_private *lp = netdev_priv(dev);
1467
1468 if (lp->lan_type < 0) { /* no LAN type detected yet? */
1469 hp100_stop_interface(dev);
1470 if ((lp->lan_type = hp100_sense_lan(dev)) < 0) {
1471 printk("hp100: %s: no connection found - check wire\n", dev->name);
1472 hp100_start_interface(dev); /* 10Mb/s RX packets maybe handled */
1473 return -EIO;
1474 }
1475 if (lp->lan_type == HP100_LAN_100)
1476 lp->hub_status = hp100_login_to_vg_hub(dev, 0); /* relogin */
1477 hp100_start_interface(dev);
1478 }
1479 return 0;
1480}
1481
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001482/*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001483 * transmit functions
1484 */
1485
1486/* tx function for busmaster mode */
Stephen Hemminger613573252009-08-31 19:50:58 +00001487static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb,
1488 struct net_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001489{
1490 unsigned long flags;
1491 int i, ok_flag;
1492 int ioaddr = dev->base_addr;
1493 struct hp100_private *lp = netdev_priv(dev);
1494 hp100_ring_t *ringptr;
1495
1496#ifdef HP100_DEBUG_B
1497 hp100_outw(0x4210, TRACE);
1498 printk("hp100: %s: start_xmit_bm\n", dev->name);
1499#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07001500 if (skb->len <= 0)
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001501 goto drop;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001502
Herbert Xu5b057c62006-06-23 02:06:41 -07001503 if (lp->chip == HP100_CHIPID_SHASTA && skb_padto(skb, ETH_ZLEN))
Patrick McHardy6ed10652009-06-23 06:03:08 +00001504 return NETDEV_TX_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001505
1506 /* Get Tx ring tail pointer */
1507 if (lp->txrtail->next == lp->txrhead) {
1508 /* No memory. */
1509#ifdef HP100_DEBUG
1510 printk("hp100: %s: start_xmit_bm: No TX PDL available.\n", dev->name);
1511#endif
1512 /* not waited long enough since last tx? */
Marcelo Feitoza Parisiff5688a2006-01-09 18:37:15 -08001513 if (time_before(jiffies, dev->trans_start + HZ))
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001514 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001515
1516 if (hp100_check_lan(dev))
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001517 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001518
1519 if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) {
1520 /* we have a 100Mb/s adapter but it isn't connected to hub */
1521 printk("hp100: %s: login to 100Mb/s hub retry\n", dev->name);
1522 hp100_stop_interface(dev);
1523 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1524 hp100_start_interface(dev);
1525 } else {
1526 spin_lock_irqsave(&lp->lock, flags);
1527 hp100_ints_off(); /* Useful ? Jean II */
1528 i = hp100_sense_lan(dev);
1529 hp100_ints_on();
1530 spin_unlock_irqrestore(&lp->lock, flags);
1531 if (i == HP100_LAN_ERR)
1532 printk("hp100: %s: link down detected\n", dev->name);
1533 else if (lp->lan_type != i) { /* cable change! */
1534 /* it's very hard - all network settings must be changed!!! */
1535 printk("hp100: %s: cable change 10Mb/s <-> 100Mb/s detected\n", dev->name);
1536 lp->lan_type = i;
1537 hp100_stop_interface(dev);
1538 if (lp->lan_type == HP100_LAN_100)
1539 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1540 hp100_start_interface(dev);
1541 } else {
1542 printk("hp100: %s: interface reset\n", dev->name);
1543 hp100_stop_interface(dev);
1544 if (lp->lan_type == HP100_LAN_100)
1545 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1546 hp100_start_interface(dev);
1547 }
1548 }
1549
1550 dev->trans_start = jiffies;
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001551 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001552 }
1553
1554 /*
1555 * we have to turn int's off before modifying this, otherwise
1556 * a tx_pdl_cleanup could occur at the same time
1557 */
1558 spin_lock_irqsave(&lp->lock, flags);
1559 ringptr = lp->txrtail;
1560 lp->txrtail = ringptr->next;
1561
1562 /* Check whether packet has minimal packet size */
1563 ok_flag = skb->len >= HP100_MIN_PACKET_SIZE;
1564 i = ok_flag ? skb->len : HP100_MIN_PACKET_SIZE;
1565
1566 ringptr->skb = skb;
1567 ringptr->pdl[0] = ((1 << 16) | i); /* PDH: 1 Fragment & length */
1568 if (lp->chip == HP100_CHIPID_SHASTA) {
1569 /* TODO:Could someone who has the EISA card please check if this works? */
1570 ringptr->pdl[2] = i;
1571 } else { /* Lassen */
1572 /* In the PDL, don't use the padded size but the real packet size: */
1573 ringptr->pdl[2] = skb->len; /* 1st Frag: Length of frag */
1574 }
1575 /* Conversion to new PCI API : map skbuf data to PCI bus.
1576 * Doc says it's OK for EISA as well - Jean II */
1577 ringptr->pdl[1] = ((u32) pci_map_single(lp->pci_dev, skb->data, ringptr->pdl[2], PCI_DMA_TODEVICE)); /* 1st Frag: Adr. of data */
1578
1579 /* Hand this PDL to the card. */
1580 hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */
1581
1582 lp->txrcommit++;
1583 spin_unlock_irqrestore(&lp->lock, flags);
1584
1585 /* Update statistics */
1586 lp->stats.tx_packets++;
1587 lp->stats.tx_bytes += skb->len;
1588 dev->trans_start = jiffies;
1589
Patrick McHardy6ed10652009-06-23 06:03:08 +00001590 return NETDEV_TX_OK;
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001591
1592drop:
1593 dev_kfree_skb(skb);
1594 return NETDEV_TX_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001595}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001596
Linus Torvalds1da177e2005-04-16 15:20:36 -07001597
1598/* clean_txring checks if packets have been sent by the card by reading
1599 * the TX_PDL register from the performance page and comparing it to the
1600 * number of commited packets. It then frees the skb's of the packets that
1601 * obviously have been sent to the network.
1602 *
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001603 * Needs the PERFORMANCE page selected.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001604 */
1605static void hp100_clean_txring(struct net_device *dev)
1606{
1607 struct hp100_private *lp = netdev_priv(dev);
1608 int ioaddr = dev->base_addr;
1609 int donecount;
1610
1611#ifdef HP100_DEBUG_B
1612 hp100_outw(0x4211, TRACE);
1613 printk("hp100: %s: clean txring\n", dev->name);
1614#endif
1615
1616 /* How many PDLs have been transmitted? */
1617 donecount = (lp->txrcommit) - hp100_inb(TX_PDL);
1618
1619#ifdef HP100_DEBUG
1620 if (donecount > MAX_TX_PDL)
1621 printk("hp100: %s: Warning: More PDLs transmitted than commited to card???\n", dev->name);
1622#endif
1623
1624 for (; 0 != donecount; donecount--) {
1625#ifdef HP100_DEBUG_BM
1626 printk("hp100: %s: Free skb: data @0x%.8x txrcommit=0x%x TXPDL=0x%x, done=0x%x\n",
1627 dev->name, (u_int) lp->txrhead->skb->data,
1628 lp->txrcommit, hp100_inb(TX_PDL), donecount);
1629#endif
1630 /* Conversion to new PCI API : NOP */
1631 pci_unmap_single(lp->pci_dev, (dma_addr_t) lp->txrhead->pdl[1], lp->txrhead->pdl[2], PCI_DMA_TODEVICE);
1632 dev_kfree_skb_any(lp->txrhead->skb);
1633 lp->txrhead->skb = (void *) NULL;
1634 lp->txrhead = lp->txrhead->next;
1635 lp->txrcommit--;
1636 }
1637}
1638
1639/* tx function for slave modes */
Stephen Hemminger613573252009-08-31 19:50:58 +00001640static netdev_tx_t hp100_start_xmit(struct sk_buff *skb,
1641 struct net_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001642{
1643 unsigned long flags;
1644 int i, ok_flag;
1645 int ioaddr = dev->base_addr;
1646 u_short val;
1647 struct hp100_private *lp = netdev_priv(dev);
1648
1649#ifdef HP100_DEBUG_B
1650 hp100_outw(0x4212, TRACE);
1651 printk("hp100: %s: start_xmit\n", dev->name);
1652#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07001653 if (skb->len <= 0)
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001654 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001655
1656 if (hp100_check_lan(dev))
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001657 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001658
1659 /* If there is not enough free memory on the card... */
1660 i = hp100_inl(TX_MEM_FREE) & 0x7fffffff;
1661 if (!(((i / 2) - 539) > (skb->len + 16) && (hp100_inb(TX_PKT_CNT) < 255))) {
1662#ifdef HP100_DEBUG
1663 printk("hp100: %s: start_xmit: tx free mem = 0x%x\n", dev->name, i);
1664#endif
1665 /* not waited long enough since last failed tx try? */
Marcelo Feitoza Parisiff5688a2006-01-09 18:37:15 -08001666 if (time_before(jiffies, dev->trans_start + HZ)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001667#ifdef HP100_DEBUG
1668 printk("hp100: %s: trans_start timing problem\n",
1669 dev->name);
1670#endif
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001671 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001672 }
1673 if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) {
1674 /* we have a 100Mb/s adapter but it isn't connected to hub */
1675 printk("hp100: %s: login to 100Mb/s hub retry\n", dev->name);
1676 hp100_stop_interface(dev);
1677 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1678 hp100_start_interface(dev);
1679 } else {
1680 spin_lock_irqsave(&lp->lock, flags);
1681 hp100_ints_off(); /* Useful ? Jean II */
1682 i = hp100_sense_lan(dev);
1683 hp100_ints_on();
1684 spin_unlock_irqrestore(&lp->lock, flags);
1685 if (i == HP100_LAN_ERR)
1686 printk("hp100: %s: link down detected\n", dev->name);
1687 else if (lp->lan_type != i) { /* cable change! */
1688 /* it's very hard - all network setting must be changed!!! */
1689 printk("hp100: %s: cable change 10Mb/s <-> 100Mb/s detected\n", dev->name);
1690 lp->lan_type = i;
1691 hp100_stop_interface(dev);
1692 if (lp->lan_type == HP100_LAN_100)
1693 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1694 hp100_start_interface(dev);
1695 } else {
1696 printk("hp100: %s: interface reset\n", dev->name);
1697 hp100_stop_interface(dev);
1698 if (lp->lan_type == HP100_LAN_100)
1699 lp->hub_status = hp100_login_to_vg_hub(dev, 0);
1700 hp100_start_interface(dev);
1701 mdelay(1);
1702 }
1703 }
1704 dev->trans_start = jiffies;
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001705 goto drop;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001706 }
1707
1708 for (i = 0; i < 6000 && (hp100_inb(OPTION_MSW) & HP100_TX_CMD); i++) {
1709#ifdef HP100_DEBUG_TX
1710 printk("hp100: %s: start_xmit: busy\n", dev->name);
1711#endif
1712 }
1713
1714 spin_lock_irqsave(&lp->lock, flags);
1715 hp100_ints_off();
1716 val = hp100_inw(IRQ_STATUS);
1717 /* Ack / clear the interrupt TX_COMPLETE interrupt - this interrupt is set
1718 * when the current packet being transmitted on the wire is completed. */
1719 hp100_outw(HP100_TX_COMPLETE, IRQ_STATUS);
1720#ifdef HP100_DEBUG_TX
1721 printk("hp100: %s: start_xmit: irq_status=0x%.4x, irqmask=0x%.4x, len=%d\n",
1722 dev->name, val, hp100_inw(IRQ_MASK), (int) skb->len);
1723#endif
1724
1725 ok_flag = skb->len >= HP100_MIN_PACKET_SIZE;
1726 i = ok_flag ? skb->len : HP100_MIN_PACKET_SIZE;
1727
1728 hp100_outw(i, DATA32); /* tell card the total packet length */
1729 hp100_outw(i, FRAGMENT_LEN); /* and first/only fragment length */
1730
1731 if (lp->mode == 2) { /* memory mapped */
Al Viro450d86d2005-12-22 14:52:52 -05001732 /* Note: The J2585B needs alignment to 32bits here! */
1733 memcpy_toio(lp->mem_ptr_virt, skb->data, (skb->len + 3) & ~3);
1734 if (!ok_flag)
1735 memset_io(lp->mem_ptr_virt, 0, HP100_MIN_PACKET_SIZE - skb->len);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001736 } else { /* programmed i/o */
1737 outsl(ioaddr + HP100_REG_DATA32, skb->data,
1738 (skb->len + 3) >> 2);
1739 if (!ok_flag)
1740 for (i = (skb->len + 3) & ~3; i < HP100_MIN_PACKET_SIZE; i += 4)
1741 hp100_outl(0, DATA32);
1742 }
1743
1744 hp100_outb(HP100_TX_CMD | HP100_SET_LB, OPTION_MSW); /* send packet */
1745
1746 lp->stats.tx_packets++;
1747 lp->stats.tx_bytes += skb->len;
1748 dev->trans_start = jiffies;
1749 hp100_ints_on();
1750 spin_unlock_irqrestore(&lp->lock, flags);
1751
1752 dev_kfree_skb_any(skb);
1753
1754#ifdef HP100_DEBUG_TX
1755 printk("hp100: %s: start_xmit: end\n", dev->name);
1756#endif
1757
Patrick McHardy6ed10652009-06-23 06:03:08 +00001758 return NETDEV_TX_OK;
Patrick McHardyd77eeb72009-06-15 23:33:24 +00001759
1760drop:
1761 dev_kfree_skb(skb);
1762 return NETDEV_TX_OK;
1763
Linus Torvalds1da177e2005-04-16 15:20:36 -07001764}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001765
Linus Torvalds1da177e2005-04-16 15:20:36 -07001766
1767/*
1768 * Receive Function (Non-Busmaster mode)
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001769 * Called when an "Receive Packet" interrupt occurs, i.e. the receive
Linus Torvalds1da177e2005-04-16 15:20:36 -07001770 * packet counter is non-zero.
1771 * For non-busmaster, this function does the whole work of transfering
1772 * the packet to the host memory and then up to higher layers via skb
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001773 * and netif_rx.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001774 */
1775
1776static void hp100_rx(struct net_device *dev)
1777{
1778 int packets, pkt_len;
1779 int ioaddr = dev->base_addr;
1780 struct hp100_private *lp = netdev_priv(dev);
1781 u_int header;
1782 struct sk_buff *skb;
1783
1784#ifdef DEBUG_B
1785 hp100_outw(0x4213, TRACE);
1786 printk("hp100: %s: rx\n", dev->name);
1787#endif
1788
1789 /* First get indication of received lan packet */
1790 /* RX_PKT_CND indicates the number of packets which have been fully */
1791 /* received onto the card but have not been fully transferred of the card */
1792 packets = hp100_inb(RX_PKT_CNT);
1793#ifdef HP100_DEBUG_RX
1794 if (packets > 1)
1795 printk("hp100: %s: rx: waiting packets = %d\n", dev->name, packets);
1796#endif
1797
1798 while (packets-- > 0) {
1799 /* If ADV_NXT_PKT is still set, we have to wait until the card has */
1800 /* really advanced to the next packet. */
1801 for (pkt_len = 0; pkt_len < 6000 && (hp100_inb(OPTION_MSW) & HP100_ADV_NXT_PKT); pkt_len++) {
1802#ifdef HP100_DEBUG_RX
1803 printk ("hp100: %s: rx: busy, remaining packets = %d\n", dev->name, packets);
1804#endif
1805 }
1806
1807 /* First we get the header, which contains information about the */
1808 /* actual length of the received packet. */
1809 if (lp->mode == 2) { /* memory mapped mode */
Al Viro450d86d2005-12-22 14:52:52 -05001810 header = readl(lp->mem_ptr_virt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001811 } else /* programmed i/o */
1812 header = hp100_inl(DATA32);
1813
1814 pkt_len = ((header & HP100_PKT_LEN_MASK) + 3) & ~3;
1815
1816#ifdef HP100_DEBUG_RX
1817 printk("hp100: %s: rx: new packet - length=%d, errors=0x%x, dest=0x%x\n",
1818 dev->name, header & HP100_PKT_LEN_MASK,
1819 (header >> 16) & 0xfff8, (header >> 16) & 7);
1820#endif
1821
1822 /* Now we allocate the skb and transfer the data into it. */
1823 skb = dev_alloc_skb(pkt_len+2);
1824 if (skb == NULL) { /* Not enough memory->drop packet */
1825#ifdef HP100_DEBUG
1826 printk("hp100: %s: rx: couldn't allocate a sk_buff of size %d\n",
1827 dev->name, pkt_len);
1828#endif
1829 lp->stats.rx_dropped++;
1830 } else { /* skb successfully allocated */
1831
1832 u_char *ptr;
1833
1834 skb_reserve(skb,2);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001835
1836 /* ptr to start of the sk_buff data area */
1837 skb_put(skb, pkt_len);
1838 ptr = skb->data;
1839
1840 /* Now transfer the data from the card into that area */
Al Viro450d86d2005-12-22 14:52:52 -05001841 if (lp->mode == 2)
1842 memcpy_fromio(ptr, lp->mem_ptr_virt,pkt_len);
1843 else /* io mapped */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001844 insl(ioaddr + HP100_REG_DATA32, ptr, pkt_len >> 2);
1845
1846 skb->protocol = eth_type_trans(skb, dev);
1847
1848#ifdef HP100_DEBUG_RX
1849 printk("hp100: %s: rx: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
1850 dev->name, ptr[0], ptr[1], ptr[2], ptr[3],
1851 ptr[4], ptr[5], ptr[6], ptr[7], ptr[8],
1852 ptr[9], ptr[10], ptr[11]);
1853#endif
1854 netif_rx(skb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001855 lp->stats.rx_packets++;
1856 lp->stats.rx_bytes += pkt_len;
1857 }
1858
1859 /* Indicate the card that we have got the packet */
1860 hp100_outb(HP100_ADV_NXT_PKT | HP100_SET_LB, OPTION_MSW);
1861
1862 switch (header & 0x00070000) {
1863 case (HP100_MULTI_ADDR_HASH << 16):
1864 case (HP100_MULTI_ADDR_NO_HASH << 16):
1865 lp->stats.multicast++;
1866 break;
1867 }
1868 } /* end of while(there are packets) loop */
1869#ifdef HP100_DEBUG_RX
1870 printk("hp100_rx: %s: end\n", dev->name);
1871#endif
1872}
1873
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001874/*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001875 * Receive Function for Busmaster Mode
1876 */
1877static void hp100_rx_bm(struct net_device *dev)
1878{
1879 int ioaddr = dev->base_addr;
1880 struct hp100_private *lp = netdev_priv(dev);
1881 hp100_ring_t *ptr;
1882 u_int header;
1883 int pkt_len;
1884
1885#ifdef HP100_DEBUG_B
1886 hp100_outw(0x4214, TRACE);
1887 printk("hp100: %s: rx_bm\n", dev->name);
1888#endif
1889
1890#ifdef HP100_DEBUG
1891 if (0 == lp->rxrcommit) {
1892 printk("hp100: %s: rx_bm called although no PDLs were committed to adapter?\n", dev->name);
1893 return;
1894 } else
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001895 /* RX_PKT_CNT states how many PDLs are currently formatted and available to
Linus Torvalds1da177e2005-04-16 15:20:36 -07001896 * the cards BM engine */
1897 if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) {
1898 printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n",
1899 dev->name, hp100_inw(RX_PKT_CNT) & 0x00ff,
1900 lp->rxrcommit);
1901 return;
1902 }
1903#endif
1904
1905 while ((lp->rxrcommit > hp100_inb(RX_PDL))) {
1906 /*
1907 * The packet was received into the pdl pointed to by lp->rxrhead (
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001908 * the oldest pdl in the ring
Linus Torvalds1da177e2005-04-16 15:20:36 -07001909 */
1910
1911 /* First we get the header, which contains information about the */
1912 /* actual length of the received packet. */
1913
1914 ptr = lp->rxrhead;
1915
1916 header = *(ptr->pdl - 1);
1917 pkt_len = (header & HP100_PKT_LEN_MASK);
1918
1919 /* Conversion to new PCI API : NOP */
1920 pci_unmap_single(lp->pci_dev, (dma_addr_t) ptr->pdl[3], MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE);
1921
1922#ifdef HP100_DEBUG_BM
1923 printk("hp100: %s: rx_bm: header@0x%x=0x%x length=%d, errors=0x%x, dest=0x%x\n",
1924 dev->name, (u_int) (ptr->pdl - 1), (u_int) header,
1925 pkt_len, (header >> 16) & 0xfff8, (header >> 16) & 7);
1926 printk("hp100: %s: RX_PDL_COUNT:0x%x TX_PDL_COUNT:0x%x, RX_PKT_CNT=0x%x PDH=0x%x, Data@0x%x len=0x%x\n",
1927 dev->name, hp100_inb(RX_PDL), hp100_inb(TX_PDL),
1928 hp100_inb(RX_PKT_CNT), (u_int) * (ptr->pdl),
1929 (u_int) * (ptr->pdl + 3), (u_int) * (ptr->pdl + 4));
1930#endif
1931
1932 if ((pkt_len >= MIN_ETHER_SIZE) &&
1933 (pkt_len <= MAX_ETHER_SIZE)) {
1934 if (ptr->skb == NULL) {
1935 printk("hp100: %s: rx_bm: skb null\n", dev->name);
1936 /* can happen if we only allocated room for the pdh due to memory shortage. */
1937 lp->stats.rx_dropped++;
1938 } else {
1939 skb_trim(ptr->skb, pkt_len); /* Shorten it */
1940 ptr->skb->protocol =
1941 eth_type_trans(ptr->skb, dev);
1942
1943 netif_rx(ptr->skb); /* Up and away... */
1944
Linus Torvalds1da177e2005-04-16 15:20:36 -07001945 lp->stats.rx_packets++;
1946 lp->stats.rx_bytes += pkt_len;
1947 }
1948
1949 switch (header & 0x00070000) {
1950 case (HP100_MULTI_ADDR_HASH << 16):
1951 case (HP100_MULTI_ADDR_NO_HASH << 16):
1952 lp->stats.multicast++;
1953 break;
1954 }
1955 } else {
1956#ifdef HP100_DEBUG
1957 printk("hp100: %s: rx_bm: Received bad packet (length=%d)\n", dev->name, pkt_len);
1958#endif
1959 if (ptr->skb != NULL)
1960 dev_kfree_skb_any(ptr->skb);
1961 lp->stats.rx_errors++;
1962 }
1963
1964 lp->rxrhead = lp->rxrhead->next;
1965
1966 /* Allocate a new rx PDL (so lp->rxrcommit stays the same) */
1967 if (0 == hp100_build_rx_pdl(lp->rxrtail, dev)) {
1968 /* No space for skb, header can still be received. */
1969#ifdef HP100_DEBUG
1970 printk("hp100: %s: rx_bm: No space for new PDL.\n", dev->name);
1971#endif
1972 return;
1973 } else { /* successfully allocated new PDL - put it in ringlist at tail. */
1974 hp100_outl((u32) lp->rxrtail->pdl_paddr, RX_PDA);
1975 lp->rxrtail = lp->rxrtail->next;
1976 }
1977
1978 }
1979}
1980
1981/*
1982 * statistics
1983 */
1984static struct net_device_stats *hp100_get_stats(struct net_device *dev)
1985{
1986 unsigned long flags;
1987 int ioaddr = dev->base_addr;
1988 struct hp100_private *lp = netdev_priv(dev);
1989
1990#ifdef HP100_DEBUG_B
1991 hp100_outw(0x4215, TRACE);
1992#endif
1993
1994 spin_lock_irqsave(&lp->lock, flags);
1995 hp100_ints_off(); /* Useful ? Jean II */
1996 hp100_update_stats(dev);
1997 hp100_ints_on();
1998 spin_unlock_irqrestore(&lp->lock, flags);
1999 return &(lp->stats);
2000}
2001
2002static void hp100_update_stats(struct net_device *dev)
2003{
2004 int ioaddr = dev->base_addr;
2005 u_short val;
2006 struct hp100_private *lp = netdev_priv(dev);
2007
2008#ifdef HP100_DEBUG_B
2009 hp100_outw(0x4216, TRACE);
2010 printk("hp100: %s: update-stats\n", dev->name);
2011#endif
2012
2013 /* Note: Statistics counters clear when read. */
2014 hp100_page(MAC_CTRL);
2015 val = hp100_inw(DROPPED) & 0x0fff;
2016 lp->stats.rx_errors += val;
2017 lp->stats.rx_over_errors += val;
2018 val = hp100_inb(CRC);
2019 lp->stats.rx_errors += val;
2020 lp->stats.rx_crc_errors += val;
2021 val = hp100_inb(ABORT);
2022 lp->stats.tx_errors += val;
2023 lp->stats.tx_aborted_errors += val;
2024 hp100_page(PERFORMANCE);
2025}
2026
2027static void hp100_misc_interrupt(struct net_device *dev)
2028{
2029#ifdef HP100_DEBUG_B
2030 int ioaddr = dev->base_addr;
2031#endif
2032 struct hp100_private *lp = netdev_priv(dev);
2033
2034#ifdef HP100_DEBUG_B
2035 int ioaddr = dev->base_addr;
2036 hp100_outw(0x4216, TRACE);
2037 printk("hp100: %s: misc_interrupt\n", dev->name);
2038#endif
2039
2040 /* Note: Statistics counters clear when read. */
2041 lp->stats.rx_errors++;
2042 lp->stats.tx_errors++;
2043}
2044
2045static void hp100_clear_stats(struct hp100_private *lp, int ioaddr)
2046{
2047 unsigned long flags;
2048
2049#ifdef HP100_DEBUG_B
2050 hp100_outw(0x4217, TRACE);
2051 printk("hp100: %s: clear_stats\n", dev->name);
2052#endif
2053
2054 spin_lock_irqsave(&lp->lock, flags);
2055 hp100_page(MAC_CTRL); /* get all statistics bytes */
2056 hp100_inw(DROPPED);
2057 hp100_inb(CRC);
2058 hp100_inb(ABORT);
2059 hp100_page(PERFORMANCE);
2060 spin_unlock_irqrestore(&lp->lock, flags);
2061}
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002062
Linus Torvalds1da177e2005-04-16 15:20:36 -07002063
2064/*
2065 * multicast setup
2066 */
2067
2068/*
2069 * Set or clear the multicast filter for this adapter.
2070 */
2071
2072static void hp100_set_multicast_list(struct net_device *dev)
2073{
2074 unsigned long flags;
2075 int ioaddr = dev->base_addr;
2076 struct hp100_private *lp = netdev_priv(dev);
2077
2078#ifdef HP100_DEBUG_B
2079 hp100_outw(0x4218, TRACE);
2080 printk("hp100: %s: set_mc_list\n", dev->name);
2081#endif
2082
2083 spin_lock_irqsave(&lp->lock, flags);
2084 hp100_ints_off();
2085 hp100_page(MAC_CTRL);
2086 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1); /* stop rx/tx */
2087
2088 if (dev->flags & IFF_PROMISC) {
2089 lp->mac2_mode = HP100_MAC2MODE6; /* promiscuous mode = get all good */
2090 lp->mac1_mode = HP100_MAC1MODE6; /* packets on the net */
2091 memset(&lp->hash_bytes, 0xff, 8);
Jiri Pirko4cd24ea2010-02-08 04:30:35 +00002092 } else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002093 lp->mac2_mode = HP100_MAC2MODE5; /* multicast mode = get packets for */
2094 lp->mac1_mode = HP100_MAC1MODE5; /* me, broadcasts and all multicasts */
2095#ifdef HP100_MULTICAST_FILTER /* doesn't work!!! */
2096 if (dev->flags & IFF_ALLMULTI) {
2097 /* set hash filter to receive all multicast packets */
2098 memset(&lp->hash_bytes, 0xff, 8);
2099 } else {
Jiri Pirko48e2f182010-02-22 09:22:26 +00002100 int i, idx;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002101 u_char *addrs;
2102 struct dev_mc_list *dmi;
2103
2104 memset(&lp->hash_bytes, 0x00, 8);
2105#ifdef HP100_DEBUG
Jiri Pirko4cd24ea2010-02-08 04:30:35 +00002106 printk("hp100: %s: computing hash filter - mc_count = %i\n",
2107 dev->name, netdev_mc_count(dev));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002108#endif
Jiri Pirko48e2f182010-02-22 09:22:26 +00002109 netdev_for_each_mc_addr(dmi, dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002110 addrs = dmi->dmi_addr;
2111 if ((*addrs & 0x01) == 0x01) { /* multicast address? */
2112#ifdef HP100_DEBUG
Johannes Berge1749612008-10-27 15:59:26 -07002113 printk("hp100: %s: multicast = %pM, ",
2114 dev->name, addrs);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002115#endif
Jiri Pirko48e2f182010-02-22 09:22:26 +00002116 for (i = idx = 0; i < 6; i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002117 idx ^= *addrs++ & 0x3f;
2118 printk(":%02x:", idx);
2119 }
2120#ifdef HP100_DEBUG
2121 printk("idx = %i\n", idx);
2122#endif
2123 lp->hash_bytes[idx >> 3] |= (1 << (idx & 7));
2124 }
2125 }
2126 }
2127#else
2128 memset(&lp->hash_bytes, 0xff, 8);
2129#endif
2130 } else {
2131 lp->mac2_mode = HP100_MAC2MODE3; /* normal mode = get packets for me */
2132 lp->mac1_mode = HP100_MAC1MODE3; /* and broadcasts */
2133 memset(&lp->hash_bytes, 0x00, 8);
2134 }
2135
2136 if (((hp100_inb(MAC_CFG_1) & 0x0f) != lp->mac1_mode) ||
2137 (hp100_inb(MAC_CFG_2) != lp->mac2_mode)) {
2138 int i;
2139
2140 hp100_outb(lp->mac2_mode, MAC_CFG_2);
2141 hp100_andb(HP100_MAC1MODEMASK, MAC_CFG_1); /* clear mac1 mode bits */
2142 hp100_orb(lp->mac1_mode, MAC_CFG_1); /* and set the new mode */
2143
2144 hp100_page(MAC_ADDRESS);
2145 for (i = 0; i < 8; i++)
2146 hp100_outb(lp->hash_bytes[i], HASH_BYTE0 + i);
2147#ifdef HP100_DEBUG
2148 printk("hp100: %s: mac1 = 0x%x, mac2 = 0x%x, multicast hash = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
2149 dev->name, lp->mac1_mode, lp->mac2_mode,
2150 lp->hash_bytes[0], lp->hash_bytes[1],
2151 lp->hash_bytes[2], lp->hash_bytes[3],
2152 lp->hash_bytes[4], lp->hash_bytes[5],
2153 lp->hash_bytes[6], lp->hash_bytes[7]);
2154#endif
2155
2156 if (lp->lan_type == HP100_LAN_100) {
2157#ifdef HP100_DEBUG
2158 printk("hp100: %s: 100VG MAC settings have changed - relogin.\n", dev->name);
2159#endif
2160 lp->hub_status = hp100_login_to_vg_hub(dev, 1); /* force a relogin to the hub */
2161 }
2162 } else {
2163 int i;
2164 u_char old_hash_bytes[8];
2165
2166 hp100_page(MAC_ADDRESS);
2167 for (i = 0; i < 8; i++)
2168 old_hash_bytes[i] = hp100_inb(HASH_BYTE0 + i);
2169 if (memcmp(old_hash_bytes, &lp->hash_bytes, 8)) {
2170 for (i = 0; i < 8; i++)
2171 hp100_outb(lp->hash_bytes[i], HASH_BYTE0 + i);
2172#ifdef HP100_DEBUG
2173 printk("hp100: %s: multicast hash = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
2174 dev->name, lp->hash_bytes[0],
2175 lp->hash_bytes[1], lp->hash_bytes[2],
2176 lp->hash_bytes[3], lp->hash_bytes[4],
2177 lp->hash_bytes[5], lp->hash_bytes[6],
2178 lp->hash_bytes[7]);
2179#endif
2180
2181 if (lp->lan_type == HP100_LAN_100) {
2182#ifdef HP100_DEBUG
2183 printk("hp100: %s: 100VG MAC settings have changed - relogin.\n", dev->name);
2184#endif
2185 lp->hub_status = hp100_login_to_vg_hub(dev, 1); /* force a relogin to the hub */
2186 }
2187 }
2188 }
2189
2190 hp100_page(MAC_CTRL);
2191 hp100_orb(HP100_RX_EN | HP100_RX_IDLE | /* enable rx */
2192 HP100_TX_EN | HP100_TX_IDLE, MAC_CFG_1); /* enable tx */
2193
2194 hp100_page(PERFORMANCE);
2195 hp100_ints_on();
2196 spin_unlock_irqrestore(&lp->lock, flags);
2197}
2198
2199/*
2200 * hardware interrupt handling
2201 */
2202
David Howells7d12e782006-10-05 14:55:46 +01002203static irqreturn_t hp100_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002204{
2205 struct net_device *dev = (struct net_device *) dev_id;
2206 struct hp100_private *lp = netdev_priv(dev);
2207
2208 int ioaddr;
2209 u_int val;
2210
2211 if (dev == NULL)
2212 return IRQ_NONE;
2213 ioaddr = dev->base_addr;
2214
2215 spin_lock(&lp->lock);
2216
2217 hp100_ints_off();
2218
2219#ifdef HP100_DEBUG_B
2220 hp100_outw(0x4219, TRACE);
2221#endif
2222
2223 /* hp100_page( PERFORMANCE ); */
2224 val = hp100_inw(IRQ_STATUS);
2225#ifdef HP100_DEBUG_IRQ
2226 printk("hp100: %s: mode=%x,IRQ_STAT=0x%.4x,RXPKTCNT=0x%.2x RXPDL=0x%.2x TXPKTCNT=0x%.2x TXPDL=0x%.2x\n",
2227 dev->name, lp->mode, (u_int) val, hp100_inb(RX_PKT_CNT),
2228 hp100_inb(RX_PDL), hp100_inb(TX_PKT_CNT), hp100_inb(TX_PDL));
2229#endif
2230
2231 if (val == 0) { /* might be a shared interrupt */
2232 spin_unlock(&lp->lock);
2233 hp100_ints_on();
2234 return IRQ_NONE;
2235 }
2236 /* We're only interested in those interrupts we really enabled. */
2237 /* val &= hp100_inw( IRQ_MASK ); */
2238
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002239 /*
2240 * RX_PDL_FILL_COMPL is set whenever a RX_PDL has been executed. A RX_PDL
2241 * is considered executed whenever the RX_PDL data structure is no longer
Linus Torvalds1da177e2005-04-16 15:20:36 -07002242 * needed.
2243 */
2244 if (val & HP100_RX_PDL_FILL_COMPL) {
2245 if (lp->mode == 1)
2246 hp100_rx_bm(dev);
2247 else {
2248 printk("hp100: %s: rx_pdl_fill_compl interrupt although not busmaster?\n", dev->name);
2249 }
2250 }
2251
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002252 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002253 * The RX_PACKET interrupt is set, when the receive packet counter is
2254 * non zero. We use this interrupt for receiving in slave mode. In
2255 * busmaster mode, we use it to make sure we did not miss any rx_pdl_fill
2256 * interrupts. If rx_pdl_fill_compl is not set and rx_packet is set, then
2257 * we somehow have missed a rx_pdl_fill_compl interrupt.
2258 */
2259
2260 if (val & HP100_RX_PACKET) { /* Receive Packet Counter is non zero */
2261 if (lp->mode != 1) /* non busmaster */
2262 hp100_rx(dev);
2263 else if (!(val & HP100_RX_PDL_FILL_COMPL)) {
2264 /* Shouldnt happen - maybe we missed a RX_PDL_FILL Interrupt? */
2265 hp100_rx_bm(dev);
2266 }
2267 }
2268
2269 /*
2270 * Ack. that we have noticed the interrupt and thereby allow next one.
2271 * Note that this is now done after the slave rx function, since first
2272 * acknowledging and then setting ADV_NXT_PKT caused an extra interrupt
2273 * on the J2573.
2274 */
2275 hp100_outw(val, IRQ_STATUS);
2276
2277 /*
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002278 * RX_ERROR is set when a packet is dropped due to no memory resources on
2279 * the card or when a RCV_ERR occurs.
2280 * TX_ERROR is set when a TX_ABORT condition occurs in the MAC->exists
2281 * only in the 802.3 MAC and happens when 16 collisions occur during a TX
Linus Torvalds1da177e2005-04-16 15:20:36 -07002282 */
2283 if (val & (HP100_TX_ERROR | HP100_RX_ERROR)) {
2284#ifdef HP100_DEBUG_IRQ
2285 printk("hp100: %s: TX/RX Error IRQ\n", dev->name);
2286#endif
2287 hp100_update_stats(dev);
2288 if (lp->mode == 1) {
2289 hp100_rxfill(dev);
2290 hp100_clean_txring(dev);
2291 }
2292 }
2293
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002294 /*
2295 * RX_PDA_ZERO is set when the PDA count goes from non-zero to zero.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002296 */
2297 if ((lp->mode == 1) && (val & (HP100_RX_PDA_ZERO)))
2298 hp100_rxfill(dev);
2299
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002300 /*
2301 * HP100_TX_COMPLETE interrupt occurs when packet transmitted on wire
2302 * is completed
Linus Torvalds1da177e2005-04-16 15:20:36 -07002303 */
2304 if ((lp->mode == 1) && (val & (HP100_TX_COMPLETE)))
2305 hp100_clean_txring(dev);
2306
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002307 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07002308 * MISC_ERROR is set when either the LAN link goes down or a detected
2309 * bus error occurs.
2310 */
2311 if (val & HP100_MISC_ERROR) { /* New for J2585B */
2312#ifdef HP100_DEBUG_IRQ
2313 printk
2314 ("hp100: %s: Misc. Error Interrupt - Check cabling.\n",
2315 dev->name);
2316#endif
2317 if (lp->mode == 1) {
2318 hp100_clean_txring(dev);
2319 hp100_rxfill(dev);
2320 }
2321 hp100_misc_interrupt(dev);
2322 }
2323
2324 spin_unlock(&lp->lock);
2325 hp100_ints_on();
2326 return IRQ_HANDLED;
2327}
2328
2329/*
2330 * some misc functions
2331 */
2332
2333static void hp100_start_interface(struct net_device *dev)
2334{
2335 unsigned long flags;
2336 int ioaddr = dev->base_addr;
2337 struct hp100_private *lp = netdev_priv(dev);
2338
2339#ifdef HP100_DEBUG_B
2340 hp100_outw(0x4220, TRACE);
2341 printk("hp100: %s: hp100_start_interface\n", dev->name);
2342#endif
2343
2344 spin_lock_irqsave(&lp->lock, flags);
2345
2346 /* Ensure the adapter does not want to request an interrupt when */
2347 /* enabling the IRQ line to be active on the bus (i.e. not tri-stated) */
2348 hp100_page(PERFORMANCE);
2349 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
2350 hp100_outw(0xffff, IRQ_STATUS); /* ack all IRQs */
2351 hp100_outw(HP100_FAKE_INT | HP100_INT_EN | HP100_RESET_LB,
2352 OPTION_LSW);
2353 /* Un Tri-state int. TODO: Check if shared interrupts can be realised? */
2354 hp100_outw(HP100_TRI_INT | HP100_RESET_HB, OPTION_LSW);
2355
2356 if (lp->mode == 1) {
2357 /* Make sure BM bit is set... */
2358 hp100_page(HW_MAP);
2359 hp100_orb(HP100_BM_MASTER, BM);
2360 hp100_rxfill(dev);
2361 } else if (lp->mode == 2) {
2362 /* Enable memory mapping. Note: Don't do this when busmaster. */
2363 hp100_outw(HP100_MMAP_DIS | HP100_RESET_HB, OPTION_LSW);
2364 }
2365
2366 hp100_page(PERFORMANCE);
2367 hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
2368 hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
2369
2370 /* enable a few interrupts: */
2371 if (lp->mode == 1) { /* busmaster mode */
2372 hp100_outw(HP100_RX_PDL_FILL_COMPL |
2373 HP100_RX_PDA_ZERO | HP100_RX_ERROR |
2374 /* HP100_RX_PACKET | */
2375 /* HP100_RX_EARLY_INT | */ HP100_SET_HB |
2376 /* HP100_TX_PDA_ZERO | */
2377 HP100_TX_COMPLETE |
2378 /* HP100_MISC_ERROR | */
2379 HP100_TX_ERROR | HP100_SET_LB, IRQ_MASK);
2380 } else {
2381 hp100_outw(HP100_RX_PACKET |
2382 HP100_RX_ERROR | HP100_SET_HB |
2383 HP100_TX_ERROR | HP100_SET_LB, IRQ_MASK);
2384 }
2385
2386 /* Note : before hp100_set_multicast_list(), because it will play with
2387 * spinlock itself... Jean II */
2388 spin_unlock_irqrestore(&lp->lock, flags);
2389
2390 /* Enable MAC Tx and RX, set MAC modes, ... */
2391 hp100_set_multicast_list(dev);
2392}
2393
2394static void hp100_stop_interface(struct net_device *dev)
2395{
2396 struct hp100_private *lp = netdev_priv(dev);
2397 int ioaddr = dev->base_addr;
2398 u_int val;
2399
2400#ifdef HP100_DEBUG_B
2401 printk("hp100: %s: hp100_stop_interface\n", dev->name);
2402 hp100_outw(0x4221, TRACE);
2403#endif
2404
2405 if (lp->mode == 1)
2406 hp100_BM_shutdown(dev);
2407 else {
2408 /* Note: MMAP_DIS will be reenabled by start_interface */
2409 hp100_outw(HP100_INT_EN | HP100_RESET_LB |
2410 HP100_TRI_INT | HP100_MMAP_DIS | HP100_SET_HB,
2411 OPTION_LSW);
2412 val = hp100_inw(OPTION_LSW);
2413
2414 hp100_page(MAC_CTRL);
2415 hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1);
2416
2417 if (!(val & HP100_HW_RST))
2418 return; /* If reset, imm. return ... */
2419 /* ... else: busy wait until idle */
2420 for (val = 0; val < 6000; val++)
2421 if ((hp100_inb(MAC_CFG_1) & (HP100_TX_IDLE | HP100_RX_IDLE)) == (HP100_TX_IDLE | HP100_RX_IDLE)) {
2422 hp100_page(PERFORMANCE);
2423 return;
2424 }
2425 printk("hp100: %s: hp100_stop_interface - timeout\n", dev->name);
2426 hp100_page(PERFORMANCE);
2427 }
2428}
2429
2430static void hp100_load_eeprom(struct net_device *dev, u_short probe_ioaddr)
2431{
2432 int i;
2433 int ioaddr = probe_ioaddr > 0 ? probe_ioaddr : dev->base_addr;
2434
2435#ifdef HP100_DEBUG_B
2436 hp100_outw(0x4222, TRACE);
2437#endif
2438
2439 hp100_page(EEPROM_CTRL);
2440 hp100_andw(~HP100_EEPROM_LOAD, EEPROM_CTRL);
2441 hp100_orw(HP100_EEPROM_LOAD, EEPROM_CTRL);
2442 for (i = 0; i < 10000; i++)
2443 if (!(hp100_inb(OPTION_MSW) & HP100_EE_LOAD))
2444 return;
2445 printk("hp100: %s: hp100_load_eeprom - timeout\n", dev->name);
2446}
2447
2448/* Sense connection status.
2449 * return values: LAN_10 - Connected to 10Mbit/s network
2450 * LAN_100 - Connected to 100Mbit/s network
2451 * LAN_ERR - not connected or 100Mbit/s Hub down
2452 */
2453static int hp100_sense_lan(struct net_device *dev)
2454{
2455 int ioaddr = dev->base_addr;
2456 u_short val_VG, val_10;
2457 struct hp100_private *lp = netdev_priv(dev);
2458
2459#ifdef HP100_DEBUG_B
2460 hp100_outw(0x4223, TRACE);
2461#endif
2462
2463 hp100_page(MAC_CTRL);
2464 val_10 = hp100_inb(10_LAN_CFG_1);
2465 val_VG = hp100_inb(VG_LAN_CFG_1);
2466 hp100_page(PERFORMANCE);
2467#ifdef HP100_DEBUG
2468 printk("hp100: %s: sense_lan: val_VG = 0x%04x, val_10 = 0x%04x\n",
2469 dev->name, val_VG, val_10);
2470#endif
2471
2472 if (val_10 & HP100_LINK_BEAT_ST) /* 10Mb connection is active */
2473 return HP100_LAN_10;
2474
2475 if (val_10 & HP100_AUI_ST) { /* have we BNC or AUI onboard? */
2476 /*
2477 * This can be overriden by dos utility, so if this has no effect,
2478 * perhaps you need to download that utility from HP and set card
2479 * back to "auto detect".
2480 */
2481 val_10 |= HP100_AUI_SEL | HP100_LOW_TH;
2482 hp100_page(MAC_CTRL);
2483 hp100_outb(val_10, 10_LAN_CFG_1);
2484 hp100_page(PERFORMANCE);
2485 return HP100_LAN_COAX;
2486 }
2487
2488 /* Those cards don't have a 100 Mbit connector */
2489 if ( !strcmp(lp->id, "HWP1920") ||
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002490 (lp->pci_dev &&
2491 lp->pci_dev->vendor == PCI_VENDOR_ID &&
Linus Torvalds1da177e2005-04-16 15:20:36 -07002492 (lp->pci_dev->device == PCI_DEVICE_ID_HP_J2970A ||
2493 lp->pci_dev->device == PCI_DEVICE_ID_HP_J2973A)))
2494 return HP100_LAN_ERR;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002495
Linus Torvalds1da177e2005-04-16 15:20:36 -07002496 if (val_VG & HP100_LINK_CABLE_ST) /* Can hear the HUBs tone. */
2497 return HP100_LAN_100;
2498 return HP100_LAN_ERR;
2499}
2500
2501static int hp100_down_vg_link(struct net_device *dev)
2502{
2503 struct hp100_private *lp = netdev_priv(dev);
2504 int ioaddr = dev->base_addr;
2505 unsigned long time;
2506 long savelan, newlan;
2507
2508#ifdef HP100_DEBUG_B
2509 hp100_outw(0x4224, TRACE);
2510 printk("hp100: %s: down_vg_link\n", dev->name);
2511#endif
2512
2513 hp100_page(MAC_CTRL);
2514 time = jiffies + (HZ / 4);
2515 do {
2516 if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST)
2517 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002518 if (!in_interrupt())
2519 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002520 } while (time_after(time, jiffies));
2521
2522 if (time_after_eq(jiffies, time)) /* no signal->no logout */
2523 return 0;
2524
2525 /* Drop the VG Link by clearing the link up cmd and load addr. */
2526
2527 hp100_andb(~(HP100_LOAD_ADDR | HP100_LINK_CMD), VG_LAN_CFG_1);
2528 hp100_orb(HP100_VG_SEL, VG_LAN_CFG_1);
2529
2530 /* Conditionally stall for >250ms on Link-Up Status (to go down) */
2531 time = jiffies + (HZ / 2);
2532 do {
2533 if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
2534 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002535 if (!in_interrupt())
2536 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002537 } while (time_after(time, jiffies));
2538
2539#ifdef HP100_DEBUG
2540 if (time_after_eq(jiffies, time))
2541 printk("hp100: %s: down_vg_link: Link does not go down?\n", dev->name);
2542#endif
2543
2544 /* To prevent condition where Rev 1 VG MAC and old hubs do not complete */
2545 /* logout under traffic (even though all the status bits are cleared), */
2546 /* do this workaround to get the Rev 1 MAC in its idle state */
2547 if (lp->chip == HP100_CHIPID_LASSEN) {
2548 /* Reset VG MAC to insure it leaves the logoff state even if */
2549 /* the Hub is still emitting tones */
2550 hp100_andb(~HP100_VG_RESET, VG_LAN_CFG_1);
2551 udelay(1500); /* wait for >1ms */
2552 hp100_orb(HP100_VG_RESET, VG_LAN_CFG_1); /* Release Reset */
2553 udelay(1500);
2554 }
2555
2556 /* New: For lassen, switch to 10 Mbps mac briefly to clear training ACK */
2557 /* to get the VG mac to full reset. This is not req.d with later chips */
2558 /* Note: It will take the between 1 and 2 seconds for the VG mac to be */
2559 /* selected again! This will be left to the connect hub function to */
2560 /* perform if desired. */
2561 if (lp->chip == HP100_CHIPID_LASSEN) {
2562 /* Have to write to 10 and 100VG control registers simultaneously */
2563 savelan = newlan = hp100_inl(10_LAN_CFG_1); /* read 10+100 LAN_CFG regs */
2564 newlan &= ~(HP100_VG_SEL << 16);
2565 newlan |= (HP100_DOT3_MAC) << 8;
2566 hp100_andb(~HP100_AUTO_MODE, MAC_CFG_3); /* Autosel off */
2567 hp100_outl(newlan, 10_LAN_CFG_1);
2568
2569 /* Conditionally stall for 5sec on VG selected. */
2570 time = jiffies + (HZ * 5);
2571 do {
2572 if (!(hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST))
2573 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002574 if (!in_interrupt())
2575 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002576 } while (time_after(time, jiffies));
2577
2578 hp100_orb(HP100_AUTO_MODE, MAC_CFG_3); /* Autosel back on */
2579 hp100_outl(savelan, 10_LAN_CFG_1);
2580 }
2581
2582 time = jiffies + (3 * HZ); /* Timeout 3s */
2583 do {
2584 if ((hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) == 0)
2585 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002586 if (!in_interrupt())
2587 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002588 } while (time_after(time, jiffies));
2589
2590 if (time_before_eq(time, jiffies)) {
2591#ifdef HP100_DEBUG
2592 printk("hp100: %s: down_vg_link: timeout\n", dev->name);
2593#endif
2594 return -EIO;
2595 }
2596
2597 time = jiffies + (2 * HZ); /* This seems to take a while.... */
2598 do {
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002599 if (!in_interrupt())
2600 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002601 } while (time_after(time, jiffies));
2602
2603 return 0;
2604}
2605
2606static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin)
2607{
2608 int ioaddr = dev->base_addr;
2609 struct hp100_private *lp = netdev_priv(dev);
2610 u_short val = 0;
2611 unsigned long time;
2612 int startst;
2613
2614#ifdef HP100_DEBUG_B
2615 hp100_outw(0x4225, TRACE);
2616 printk("hp100: %s: login_to_vg_hub\n", dev->name);
2617#endif
2618
2619 /* Initiate a login sequence iff VG MAC is enabled and either Load Address
2620 * bit is zero or the force relogin flag is set (e.g. due to MAC address or
2621 * promiscuous mode change)
2622 */
2623 hp100_page(MAC_CTRL);
2624 startst = hp100_inb(VG_LAN_CFG_1);
2625 if ((force_relogin == 1) || (hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST)) {
2626#ifdef HP100_DEBUG_TRAINING
2627 printk("hp100: %s: Start training\n", dev->name);
2628#endif
2629
2630 /* Ensure VG Reset bit is 1 (i.e., do not reset) */
2631 hp100_orb(HP100_VG_RESET, VG_LAN_CFG_1);
2632
2633 /* If Lassen AND auto-select-mode AND VG tones were sensed on */
2634 /* entry then temporarily put them into force 100Mbit mode */
2635 if ((lp->chip == HP100_CHIPID_LASSEN) && (startst & HP100_LINK_CABLE_ST))
2636 hp100_andb(~HP100_DOT3_MAC, 10_LAN_CFG_2);
2637
2638 /* Drop the VG link by zeroing Link Up Command and Load Address */
2639 hp100_andb(~(HP100_LINK_CMD /* |HP100_LOAD_ADDR */ ), VG_LAN_CFG_1);
2640
2641#ifdef HP100_DEBUG_TRAINING
2642 printk("hp100: %s: Bring down the link\n", dev->name);
2643#endif
2644
2645 /* Wait for link to drop */
2646 time = jiffies + (HZ / 10);
2647 do {
2648 if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
2649 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002650 if (!in_interrupt())
2651 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002652 } while (time_after(time, jiffies));
2653
2654 /* Start an addressed training and optionally request promiscuous port */
2655 if ((dev->flags) & IFF_PROMISC) {
2656 hp100_orb(HP100_PROM_MODE, VG_LAN_CFG_2);
2657 if (lp->chip == HP100_CHIPID_LASSEN)
2658 hp100_orw(HP100_MACRQ_PROMSC, TRAIN_REQUEST);
2659 } else {
2660 hp100_andb(~HP100_PROM_MODE, VG_LAN_CFG_2);
2661 /* For ETR parts we need to reset the prom. bit in the training
2662 * register, otherwise promiscious mode won't be disabled.
2663 */
2664 if (lp->chip == HP100_CHIPID_LASSEN) {
2665 hp100_andw(~HP100_MACRQ_PROMSC, TRAIN_REQUEST);
2666 }
2667 }
2668
2669 /* With ETR parts, frame format request bits can be set. */
2670 if (lp->chip == HP100_CHIPID_LASSEN)
2671 hp100_orb(HP100_MACRQ_FRAMEFMT_EITHER, TRAIN_REQUEST);
2672
2673 hp100_orb(HP100_LINK_CMD | HP100_LOAD_ADDR | HP100_VG_RESET, VG_LAN_CFG_1);
2674
2675 /* Note: Next wait could be omitted for Hood and earlier chips under */
2676 /* certain circumstances */
2677 /* TODO: check if hood/earlier and skip wait. */
2678
2679 /* Wait for either short timeout for VG tones or long for login */
2680 /* Wait for the card hardware to signalise link cable status ok... */
2681 hp100_page(MAC_CTRL);
2682 time = jiffies + (1 * HZ); /* 1 sec timeout for cable st */
2683 do {
2684 if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST)
2685 break;
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002686 if (!in_interrupt())
2687 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002688 } while (time_before(jiffies, time));
2689
2690 if (time_after_eq(jiffies, time)) {
2691#ifdef HP100_DEBUG_TRAINING
2692 printk("hp100: %s: Link cable status not ok? Training aborted.\n", dev->name);
2693#endif
2694 } else {
2695#ifdef HP100_DEBUG_TRAINING
2696 printk
2697 ("hp100: %s: HUB tones detected. Trying to train.\n",
2698 dev->name);
2699#endif
2700
2701 time = jiffies + (2 * HZ); /* again a timeout */
2702 do {
2703 val = hp100_inb(VG_LAN_CFG_1);
2704 if ((val & (HP100_LINK_UP_ST))) {
2705#ifdef HP100_DEBUG_TRAINING
2706 printk("hp100: %s: Passed training.\n", dev->name);
2707#endif
2708 break;
2709 }
Nishanth Aravamudan3173c892005-09-11 02:09:55 -07002710 if (!in_interrupt())
2711 schedule_timeout_interruptible(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002712 } while (time_after(time, jiffies));
2713 }
2714
2715 /* If LINK_UP_ST is set, then we are logged into the hub. */
2716 if (time_before_eq(jiffies, time) && (val & HP100_LINK_UP_ST)) {
2717#ifdef HP100_DEBUG_TRAINING
2718 printk("hp100: %s: Successfully logged into the HUB.\n", dev->name);
2719 if (lp->chip == HP100_CHIPID_LASSEN) {
2720 val = hp100_inw(TRAIN_ALLOW);
2721 printk("hp100: %s: Card supports 100VG MAC Version \"%s\" ",
2722 dev->name, (hp100_inw(TRAIN_REQUEST) & HP100_CARD_MACVER) ? "802.12" : "Pre");
2723 printk("Driver will use MAC Version \"%s\"\n", (val & HP100_HUB_MACVER) ? "802.12" : "Pre");
2724 printk("hp100: %s: Frame format is %s.\n", dev->name, (val & HP100_MALLOW_FRAMEFMT) ? "802.5" : "802.3");
2725 }
2726#endif
2727 } else {
2728 /* If LINK_UP_ST is not set, login was not successful */
2729 printk("hp100: %s: Problem logging into the HUB.\n", dev->name);
2730 if (lp->chip == HP100_CHIPID_LASSEN) {
2731 /* Check allowed Register to find out why there is a problem. */
2732 val = hp100_inw(TRAIN_ALLOW); /* won't work on non-ETR card */
2733#ifdef HP100_DEBUG_TRAINING
2734 printk("hp100: %s: MAC Configuration requested: 0x%04x, HUB allowed: 0x%04x\n", dev->name, hp100_inw(TRAIN_REQUEST), val);
2735#endif
2736 if (val & HP100_MALLOW_ACCDENIED)
2737 printk("hp100: %s: HUB access denied.\n", dev->name);
2738 if (val & HP100_MALLOW_CONFIGURE)
2739 printk("hp100: %s: MAC Configuration is incompatible with the Network.\n", dev->name);
2740 if (val & HP100_MALLOW_DUPADDR)
2741 printk("hp100: %s: Duplicate MAC Address on the Network.\n", dev->name);
2742 }
2743 }
2744
2745 /* If we have put the chip into forced 100 Mbit mode earlier, go back */
2746 /* to auto-select mode */
2747
2748 if ((lp->chip == HP100_CHIPID_LASSEN) && (startst & HP100_LINK_CABLE_ST)) {
2749 hp100_page(MAC_CTRL);
2750 hp100_orb(HP100_DOT3_MAC, 10_LAN_CFG_2);
2751 }
2752
2753 val = hp100_inb(VG_LAN_CFG_1);
2754
2755 /* Clear the MISC_ERROR Interrupt, which might be generated when doing the relogin */
2756 hp100_page(PERFORMANCE);
2757 hp100_outw(HP100_MISC_ERROR, IRQ_STATUS);
2758
2759 if (val & HP100_LINK_UP_ST)
2760 return (0); /* login was ok */
2761 else {
2762 printk("hp100: %s: Training failed.\n", dev->name);
2763 hp100_down_vg_link(dev);
2764 return -EIO;
2765 }
2766 }
2767 /* no forced relogin & already link there->no training. */
2768 return -EIO;
2769}
2770
2771static void hp100_cascade_reset(struct net_device *dev, u_short enable)
2772{
2773 int ioaddr = dev->base_addr;
2774 struct hp100_private *lp = netdev_priv(dev);
2775
2776#ifdef HP100_DEBUG_B
2777 hp100_outw(0x4226, TRACE);
2778 printk("hp100: %s: cascade_reset\n", dev->name);
2779#endif
2780
2781 if (enable) {
2782 hp100_outw(HP100_HW_RST | HP100_RESET_LB, OPTION_LSW);
2783 if (lp->chip == HP100_CHIPID_LASSEN) {
2784 /* Lassen requires a PCI transmit fifo reset */
2785 hp100_page(HW_MAP);
2786 hp100_andb(~HP100_PCI_RESET, PCICTRL2);
2787 hp100_orb(HP100_PCI_RESET, PCICTRL2);
2788 /* Wait for min. 300 ns */
2789 /* we can't use jiffies here, because it may be */
2790 /* that we have disabled the timer... */
2791 udelay(400);
2792 hp100_andb(~HP100_PCI_RESET, PCICTRL2);
2793 hp100_page(PERFORMANCE);
2794 }
2795 } else { /* bring out of reset */
2796 hp100_outw(HP100_HW_RST | HP100_SET_LB, OPTION_LSW);
2797 udelay(400);
2798 hp100_page(PERFORMANCE);
2799 }
2800}
2801
2802#ifdef HP100_DEBUG
2803void hp100_RegisterDump(struct net_device *dev)
2804{
2805 int ioaddr = dev->base_addr;
2806 int Page;
2807 int Register;
2808
2809 /* Dump common registers */
2810 printk("hp100: %s: Cascade Register Dump\n", dev->name);
2811 printk("hardware id #1: 0x%.2x\n", hp100_inb(HW_ID));
2812 printk("hardware id #2/paging: 0x%.2x\n", hp100_inb(PAGING));
2813 printk("option #1: 0x%.4x\n", hp100_inw(OPTION_LSW));
2814 printk("option #2: 0x%.4x\n", hp100_inw(OPTION_MSW));
2815
2816 /* Dump paged registers */
2817 for (Page = 0; Page < 8; Page++) {
2818 /* Dump registers */
2819 printk("page: 0x%.2x\n", Page);
2820 outw(Page, ioaddr + 0x02);
2821 for (Register = 0x8; Register < 0x22; Register += 2) {
2822 /* Display Register contents except data port */
2823 if (((Register != 0x10) && (Register != 0x12)) || (Page > 0)) {
2824 printk("0x%.2x = 0x%.4x\n", Register, inw(ioaddr + Register));
2825 }
2826 }
2827 }
2828 hp100_page(PERFORMANCE);
2829}
2830#endif
2831
2832
2833static void cleanup_dev(struct net_device *d)
2834{
2835 struct hp100_private *p = netdev_priv(d);
2836
2837 unregister_netdev(d);
2838 release_region(d->base_addr, HP100_REGION_SIZE);
2839
2840 if (p->mode == 1) /* busmaster */
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002841 pci_free_consistent(p->pci_dev, MAX_RINGSIZE + 0x0f,
2842 p->page_vaddr_algn,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002843 virt_to_whatever(d, p->page_vaddr_algn));
2844 if (p->mem_ptr_virt)
2845 iounmap(p->mem_ptr_virt);
2846
2847 free_netdev(d);
2848}
2849
2850#ifdef CONFIG_EISA
2851static int __init hp100_eisa_probe (struct device *gendev)
2852{
2853 struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private));
2854 struct eisa_device *edev = to_eisa_device(gendev);
2855 int err;
2856
2857 if (!dev)
2858 return -ENOMEM;
2859
Linus Torvalds1da177e2005-04-16 15:20:36 -07002860 SET_NETDEV_DEV(dev, &edev->dev);
2861
2862 err = hp100_probe1(dev, edev->base_addr + 0xC38, HP100_BUS_EISA, NULL);
2863 if (err)
2864 goto out1;
2865
Linus Torvalds1da177e2005-04-16 15:20:36 -07002866#ifdef HP100_DEBUG
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002867 printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002868 dev->base_addr);
2869#endif
Greg Kroah-Hartman1aec5bd2009-04-30 12:19:31 +00002870 dev_set_drvdata(gendev, dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002871 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002872 out1:
2873 free_netdev(dev);
2874 return err;
2875}
2876
2877static int __devexit hp100_eisa_remove (struct device *gendev)
2878{
Greg Kroah-Hartman1aec5bd2009-04-30 12:19:31 +00002879 struct net_device *dev = dev_get_drvdata(gendev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002880 cleanup_dev(dev);
2881 return 0;
2882}
2883
2884static struct eisa_driver hp100_eisa_driver = {
2885 .id_table = hp100_eisa_tbl,
2886 .driver = {
2887 .name = "hp100",
2888 .probe = hp100_eisa_probe,
2889 .remove = __devexit_p (hp100_eisa_remove),
2890 }
2891};
2892#endif
2893
2894#ifdef CONFIG_PCI
2895static int __devinit hp100_pci_probe (struct pci_dev *pdev,
2896 const struct pci_device_id *ent)
2897{
2898 struct net_device *dev;
2899 int ioaddr;
2900 u_short pci_command;
2901 int err;
2902
2903 if (pci_enable_device(pdev))
2904 return -ENODEV;
2905
2906 dev = alloc_etherdev(sizeof(struct hp100_private));
2907 if (!dev) {
2908 err = -ENOMEM;
2909 goto out0;
2910 }
2911
Linus Torvalds1da177e2005-04-16 15:20:36 -07002912 SET_NETDEV_DEV(dev, &pdev->dev);
2913
2914 pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
2915 if (!(pci_command & PCI_COMMAND_IO)) {
2916#ifdef HP100_DEBUG
2917 printk("hp100: %s: PCI I/O Bit has not been set. Setting...\n", dev->name);
2918#endif
2919 pci_command |= PCI_COMMAND_IO;
2920 pci_write_config_word(pdev, PCI_COMMAND, pci_command);
2921 }
2922
2923 if (!(pci_command & PCI_COMMAND_MASTER)) {
2924#ifdef HP100_DEBUG
2925 printk("hp100: %s: PCI Master Bit has not been set. Setting...\n", dev->name);
2926#endif
2927 pci_command |= PCI_COMMAND_MASTER;
2928 pci_write_config_word(pdev, PCI_COMMAND, pci_command);
2929 }
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002930
Linus Torvalds1da177e2005-04-16 15:20:36 -07002931 ioaddr = pci_resource_start(pdev, 0);
2932 err = hp100_probe1(dev, ioaddr, HP100_BUS_PCI, pdev);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002933 if (err)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002934 goto out1;
Jeff Garzik6aa20a22006-09-13 13:24:59 -04002935
Linus Torvalds1da177e2005-04-16 15:20:36 -07002936#ifdef HP100_DEBUG
2937 printk("hp100: %s: PCI adapter found at 0x%x\n", dev->name, ioaddr);
2938#endif
2939 pci_set_drvdata(pdev, dev);
2940 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002941 out1:
2942 free_netdev(dev);
2943 out0:
2944 pci_disable_device(pdev);
2945 return err;
2946}
2947
2948static void __devexit hp100_pci_remove (struct pci_dev *pdev)
2949{
2950 struct net_device *dev = pci_get_drvdata(pdev);
2951
2952 cleanup_dev(dev);
2953 pci_disable_device(pdev);
2954}
2955
2956
2957static struct pci_driver hp100_pci_driver = {
2958 .name = "hp100",
2959 .id_table = hp100_pci_tbl,
2960 .probe = hp100_pci_probe,
2961 .remove = __devexit_p(hp100_pci_remove),
2962};
2963#endif
2964
2965/*
2966 * module section
2967 */
2968
2969MODULE_LICENSE("GPL");
Jaroslav Kyselac1017a42007-10-15 09:50:19 +02002970MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, "
Linus Torvalds1da177e2005-04-16 15:20:36 -07002971 "Siegfried \"Frieder\" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>");
2972MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters");
2973
2974/*
2975 * Note: to register three isa devices, use:
2976 * option hp100 hp100_port=0,0,0
2977 * to register one card at io 0x280 as eth239, use:
2978 * option hp100 hp100_port=0x280
2979 */
2980#if defined(MODULE) && defined(CONFIG_ISA)
2981#define HP100_DEVICES 5
2982/* Parameters set by insmod */
2983static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES-1)] = -1 };
2984module_param_array(hp100_port, int, NULL, 0);
2985
2986/* List of devices */
2987static struct net_device *hp100_devlist[HP100_DEVICES];
2988
2989static int __init hp100_isa_init(void)
2990{
2991 struct net_device *dev;
2992 int i, err, cards = 0;
2993
2994 /* Don't autoprobe ISA bus */
2995 if (hp100_port[0] == 0)
2996 return -ENODEV;
2997
2998 /* Loop on all possible base addresses */
2999 for (i = 0; i < HP100_DEVICES && hp100_port[i] != -1; ++i) {
3000 dev = alloc_etherdev(sizeof(struct hp100_private));
3001 if (!dev) {
3002 printk(KERN_WARNING "hp100: no memory for network device\n");
3003 while (cards > 0)
3004 cleanup_dev(hp100_devlist[--cards]);
3005
3006 return -ENOMEM;
3007 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07003008
3009 err = hp100_isa_probe(dev, hp100_port[i]);
b1fc5502005-05-12 20:11:55 -04003010 if (!err)
3011 hp100_devlist[cards++] = dev;
3012 else
Linus Torvalds1da177e2005-04-16 15:20:36 -07003013 free_netdev(dev);
3014 }
3015
3016 return cards > 0 ? 0 : -ENODEV;
3017}
3018
Sam Ravnborgc79d9c92007-06-01 00:47:14 -07003019static void hp100_isa_cleanup(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003020{
3021 int i;
3022
3023 for (i = 0; i < HP100_DEVICES; i++) {
3024 struct net_device *dev = hp100_devlist[i];
3025 if (dev)
3026 cleanup_dev(dev);
3027 }
3028}
3029#else
3030#define hp100_isa_init() (0)
3031#define hp100_isa_cleanup() do { } while(0)
3032#endif
3033
3034static int __init hp100_module_init(void)
3035{
3036 int err;
3037
3038 err = hp100_isa_init();
3039 if (err && err != -ENODEV)
3040 goto out;
3041#ifdef CONFIG_EISA
3042 err = eisa_driver_register(&hp100_eisa_driver);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04003043 if (err && err != -ENODEV)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003044 goto out2;
3045#endif
3046#ifdef CONFIG_PCI
Richard Knutsson7e3e8b02007-02-05 16:29:48 -08003047 err = pci_register_driver(&hp100_pci_driver);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04003048 if (err && err != -ENODEV)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003049 goto out3;
3050#endif
3051 out:
3052 return err;
3053 out3:
3054#ifdef CONFIG_EISA
3055 eisa_driver_unregister (&hp100_eisa_driver);
3056 out2:
3057#endif
3058 hp100_isa_cleanup();
3059 goto out;
3060}
3061
3062
3063static void __exit hp100_module_exit(void)
3064{
3065 hp100_isa_cleanup();
3066#ifdef CONFIG_EISA
3067 eisa_driver_unregister (&hp100_eisa_driver);
3068#endif
3069#ifdef CONFIG_PCI
3070 pci_unregister_driver (&hp100_pci_driver);
3071#endif
3072}
3073
3074module_init(hp100_module_init)
3075module_exit(hp100_module_exit)