blob: 413576a2f313347c745f85ded7e3820a1ad55813 [file] [log] [blame]
Russell Kinga4e137a2005-08-18 10:06:59 +01001#
2# Multifunction miscellaneous devices
3#
4
Ben Dooksb6d64542007-02-20 13:58:01 -08005menu "Multifunction device drivers"
Martin Schwidefskye25df122007-05-10 15:45:57 +02006 depends on HAS_IOMEM
Ben Dooksb6d64542007-02-20 13:58:01 -08007
Dmitry Baryshkovaa613de2008-06-27 10:37:19 +01008config MFD_CORE
9 tristate
10 default n
11
Ben Dooksb6d64542007-02-20 13:58:01 -080012config MFD_SM501
13 tristate "Support for Silicon Motion SM501"
14 ---help---
15 This is the core driver for the Silicon Motion SM501 multimedia
16 companion chip. This device is a multifunction device which may
Matt LaPlante01dd2fb2007-10-20 01:34:40 +020017 provide numerous interfaces including USB host controller, USB gadget,
18 asynchronous serial ports, audio functions, and a dual display video
Ben Dooksb6d64542007-02-20 13:58:01 -080019 interface. The device may be connected by PCI or local bus with
20 varying functions enabled.
21
Ben Dooksf61be272008-07-25 01:45:59 -070022config MFD_SM501_GPIO
23 bool "Export GPIO via GPIO layer"
Samuel Ortiz2eedd602008-09-25 00:39:05 +020024 depends on MFD_SM501 && GPIOLIB
Ben Dooksf61be272008-07-25 01:45:59 -070025 ---help---
26 This option uses the gpio library layer to export the 64 GPIO
27 lines on the SM501. The platform data is used to supply the
28 base number for the first GPIO line to register.
29
Samuel Ortizfa9ff4b2008-02-07 00:14:49 -080030config MFD_ASIC3
31 bool "Support for Compaq ASIC3"
Samuel Ortiz2eedd602008-09-25 00:39:05 +020032 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
Philipp Zabel9461f652009-06-15 12:10:24 +020033 select MFD_CORE
Samuel Ortizfa9ff4b2008-02-07 00:14:49 -080034 ---help---
35 This driver supports the ASIC3 multifunction chip found on many
36 PDAs (mainly iPAQ and HTC based ones)
37
Magnus Damma87d5632009-10-02 02:22:09 +000038config MFD_SH_MOBILE_SDHI
39 bool "Support for SuperH Mobile SDHI"
40 depends on SUPERH
41 select MFD_CORE
42 ---help---
43 This driver supports the SDHI hardware block found in many
44 SuperH Mobile SoCs.
45
David Brownell0931a4c2008-12-22 12:05:27 +010046config MFD_DM355EVM_MSP
47 bool "DaVinci DM355 EVM microcontroller"
48 depends on I2C && MACH_DAVINCI_DM355_EVM
49 help
50 This driver supports the MSP430 microcontroller used on these
51 boards. MSP430 firmware manages resets and power sequencing,
52 inputs from buttons and the IR remote, LEDs, an RTC, and more.
53
Philipp Zabela1635b82008-04-09 19:20:34 +010054config HTC_EGPIO
55 bool "HTC EGPIO support"
Michael Buesch7444a722008-07-25 01:46:11 -070056 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
Philipp Zabela1635b82008-04-09 19:20:34 +010057 help
58 This driver supports the CPLD egpio chip present on
59 several HTC phones. It provides basic support for input
60 pins, output pins, and irqs.
61
Philipp Zabel5dc33392008-04-12 13:25:41 +010062config HTC_PASIC3
63 tristate "HTC PASIC3 LED/DS1WM chip support"
Philipp Zabel0254a8f2009-02-17 10:06:45 +010064 select MFD_CORE
Philipp Zabel5dc33392008-04-12 13:25:41 +010065 help
66 This core driver provides register access for the LED/DS1WM
67 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
68 HTC Magician devices, respectively. Actual functionality is
69 handled by the leds-pasic3 and ds1wm drivers.
70
Marek Vašutd9105c22008-08-03 21:34:08 +010071config UCB1400_CORE
72 tristate "Philips UCB1400 Core driver"
Randy Dunlape4831802008-10-15 13:29:07 +020073 depends on AC97_BUS
Andrew Morton5a49a542008-10-15 13:30:47 +020074 depends on GPIOLIB
Marek Vašutd9105c22008-08-03 21:34:08 +010075 help
76 This enables support for the Philips UCB1400 core functions.
77 The UCB1400 is an AC97 audio codec.
78
79 To compile this driver as a module, choose M here: the
80 module will be called ucb1400_core.
81
David Brownell87c13492008-12-22 12:16:27 +010082config TPS65010
83 tristate "TPS6501x Power Management chips"
84 depends on I2C && GPIOLIB
85 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
86 help
87 If you say yes here you get support for the TPS6501x series of
88 Power Management chips. These include voltage regulators,
89 lithium ion/polymer battery charging, and other features that
90 are often used in portable devices like cell phones and cameras.
91
92 This driver can also be built as a module. If so, the module
93 will be called tps65010.
94
David Brownell88e75cc2008-12-22 12:18:02 +010095config MENELAUS
96 bool "Texas Instruments TWL92330/Menelaus PM chip"
97 depends on I2C=y && ARCH_OMAP24XX
98 help
99 If you say yes here you get support for the Texas Instruments
100 TWL92330/Menelaus Power Management chip. This include voltage
Matt LaPlante692105b2009-01-26 11:12:25 +0100101 regulators, Dual slot memory card transceivers, real-time clock
David Brownell88e75cc2008-12-22 12:18:02 +0100102 and other features that are often used in portable devices like
103 cell phones and PDAs.
104
David Brownella603a7f2008-10-15 12:15:39 +0200105config TWL4030_CORE
Balaji T Ke8deb282009-12-14 00:25:31 +0100106 bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
David Brownell67460a72008-12-01 00:35:33 +0100107 depends on I2C=y && GENERIC_HARDIRQS
David Brownella603a7f2008-10-15 12:15:39 +0200108 help
Balaji T Ke8deb282009-12-14 00:25:31 +0100109 Say yes here if you have TWL4030 / TWL6030 family chip on your board.
David Brownella603a7f2008-10-15 12:15:39 +0200110 This core driver provides register access and IRQ handling
111 facilities, and registers devices for the various functions
112 so that function-specific drivers can bind to them.
113
114 These multi-function chips are found on many OMAP2 and OMAP3
115 boards, providing power management, RTC, GPIO, keypad, a
116 high speed USB OTG transceiver, an audio codec (on most
117 versions) and many other features.
118
Amit Kucheriaebf0bd32009-08-31 18:32:18 +0200119config TWL4030_POWER
120 bool "Support power resources on TWL4030 family chips"
121 depends on TWL4030_CORE && ARM
122 help
123 Say yes here if you want to use the power resources on the
124 TWL4030 family chips. Most of these resources are regulators,
125 which have a separate driver; some are control signals, such
126 as clock request handshaking.
127
128 This driver uses board-specific data to initialize the resources
129 and load scripts controling which resources are switched off/on
130 or reset when a sleep, wakeup or warm reset event occurs.
131
Peter Ujfalusi0b83dde2009-10-22 13:26:45 +0300132config TWL4030_CODEC
133 bool
134 depends on TWL4030_CORE
135 select MFD_CORE
136 default n
137
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200138config MFD_TMIO
139 bool
140 default n
141
Ian Molton1f192012008-07-15 15:09:43 +0100142config MFD_T7L66XB
143 bool "Support Toshiba T7L66XB"
Al Viro9ca68232008-11-01 18:19:59 +0000144 depends on ARM && HAVE_CLK
Ian Molton1f192012008-07-15 15:09:43 +0100145 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200146 select MFD_TMIO
Ian Molton1f192012008-07-15 15:09:43 +0100147 help
148 Support for Toshiba Mobile IO Controller T7L66XB
149
Ian Moltoncbdfb422008-07-15 15:12:52 +0100150config MFD_TC6387XB
151 bool "Support Toshiba TC6387XB"
Al Viro9ca68232008-11-01 18:19:59 +0000152 depends on ARM && HAVE_CLK
Ian Moltoncbdfb422008-07-15 15:12:52 +0100153 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200154 select MFD_TMIO
Ian Moltoncbdfb422008-07-15 15:12:52 +0100155 help
156 Support for Toshiba Mobile IO Controller TC6387XB
157
Dmitry Baryshkovd6315942008-06-22 12:01:58 +0100158config MFD_TC6393XB
159 bool "Support Toshiba TC6393XB"
Adrian Bunk8d25b362008-07-26 02:38:00 +0300160 depends on GPIOLIB && ARM
Dmitry Baryshkovf024ff12008-06-27 10:37:57 +0100161 select MFD_CORE
Samuel Ortiz1c2c30a2008-08-05 19:27:58 +0200162 select MFD_TMIO
Dmitry Baryshkovd6315942008-06-22 12:01:58 +0100163 help
164 Support for Toshiba Mobile IO Controller TC6393XB
165
Samuel Ortiz8e2eaab2008-10-24 17:10:05 +0200166config PMIC_DA903X
167 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
168 depends on I2C=y
169 help
170 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
171 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
172 usually found on PXA processors-based platforms. This includes
173 the I2C driver and the core APIs _only_, you have to select
174 individual components like LCD backlight, voltage regulators,
175 LEDs and battery-charger under the corresponding menus.
176
Michael Hennericha5736e02009-10-12 17:22:38 +0200177config PMIC_ADP5520
178 bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
179 depends on I2C=y
180 help
181 Say yes here to add support for Analog Devices AD5520 and ADP5501,
182 Multifunction Power Management IC. This includes
183 the I2C driver and the core APIs _only_, you have to select
184 individual components like LCD backlight, LEDs, GPIOs and Kepad
185 under the corresponding menus.
186
Mark Brown1d9f9f02008-09-10 18:58:42 +0100187config MFD_WM8400
188 tristate "Support Wolfson Microelectronics WM8400"
Mark Brownb8380c12008-12-18 10:54:22 +0100189 select MFD_CORE
Mark Brown9c366452008-10-24 17:16:11 +0200190 depends on I2C
Mark Brown1d9f9f02008-09-10 18:58:42 +0100191 help
192 Support for the Wolfson Microelecronics WM8400 PMIC and audio
Mark Brown9e5aca52009-05-29 11:34:18 +0100193 CODEC. This driver provides common support for accessing
Mark Brown1d9f9f02008-09-10 18:58:42 +0100194 the device, additional drivers must be enabled in order to use
195 the functionality of the device.
196
Mark Brownb11062b2009-07-27 14:45:58 +0100197config MFD_WM831X
Mark Brown6e401732009-11-23 13:42:34 +0000198 bool "Support Wolfson Microelectronics WM831x/2x PMICs"
Mark Brownb11062b2009-07-27 14:45:58 +0100199 select MFD_CORE
Mark Brown01253502009-11-24 10:48:56 +0000200 depends on I2C=y
Mark Brownb11062b2009-07-27 14:45:58 +0100201 help
Mark Brownd4e0a892009-10-01 15:41:07 +0100202 Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
203 This driver provides common support for accessing the device,
Mark Brownb11062b2009-07-27 14:45:58 +0100204 additional drivers must be enabled in order to use the
205 functionality of the device.
206
Mark Brown89b40122008-10-10 15:58:10 +0100207config MFD_WM8350
208 tristate
209
210config MFD_WM8350_CONFIG_MODE_0
211 bool
212 depends on MFD_WM8350
213
214config MFD_WM8350_CONFIG_MODE_1
215 bool
216 depends on MFD_WM8350
217
218config MFD_WM8350_CONFIG_MODE_2
219 bool
220 depends on MFD_WM8350
221
222config MFD_WM8350_CONFIG_MODE_3
223 bool
224 depends on MFD_WM8350
225
Mark Brownca23f8c2008-12-18 23:12:28 +0100226config MFD_WM8351_CONFIG_MODE_0
227 bool
228 depends on MFD_WM8350
229
230config MFD_WM8351_CONFIG_MODE_1
231 bool
232 depends on MFD_WM8350
233
234config MFD_WM8351_CONFIG_MODE_2
235 bool
236 depends on MFD_WM8350
237
238config MFD_WM8351_CONFIG_MODE_3
239 bool
240 depends on MFD_WM8350
241
Mark Brown96920632008-12-18 23:09:50 +0100242config MFD_WM8352_CONFIG_MODE_0
243 bool
244 depends on MFD_WM8350
245
246config MFD_WM8352_CONFIG_MODE_1
247 bool
248 depends on MFD_WM8350
249
250config MFD_WM8352_CONFIG_MODE_2
251 bool
252 depends on MFD_WM8350
253
254config MFD_WM8352_CONFIG_MODE_3
255 bool
256 depends on MFD_WM8350
257
Mark Brownc661a0b2008-10-10 15:58:11 +0100258config MFD_WM8350_I2C
259 tristate "Support Wolfson Microelectronics WM8350 with I2C"
260 select MFD_WM8350
261 depends on I2C
262 help
263 The WM8350 is an integrated audio and power management
264 subsystem with watchdog and RTC functionality for embedded
265 systems. This option enables core support for the WM8350 with
266 I2C as the control interface. Additional options must be
267 selected to enable support for the functionality of the chip.
268
Balaji Raof52046b2009-01-09 01:49:01 +0100269config MFD_PCF50633
270 tristate "Support for NXP PCF50633"
271 depends on I2C
272 help
273 Say yes here if you have NXP PCF50633 chip on your board.
274 This core driver provides register access and IRQ handling
275 facilities, and registers devices for the various functions
276 so that function-specific drivers can bind to them.
277
Sascha Hauer8238add2009-08-19 01:40:28 +0200278config MFD_MC13783
279 tristate "Support Freescale MC13783"
280 depends on SPI_MASTER
281 select MFD_CORE
282 help
283 Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
284 This driver provides common support for accessing the device,
285 additional drivers must be enabled in order to use the
286 functionality of the device.
287
Balaji Rao08c3e062009-01-09 01:49:26 +0100288config PCF50633_ADC
289 tristate "Support for NXP PCF50633 ADC"
290 depends on MFD_PCF50633
291 help
292 Say yes here if you want to include support for ADC in the
293 NXP PCF50633 chip.
294
Balaji Rao6a3d1192009-01-09 01:49:37 +0100295config PCF50633_GPIO
296 tristate "Support for NXP PCF50633 GPIO"
297 depends on MFD_PCF50633
298 help
299 Say yes here if you want to include support GPIO for pins on
300 the PCF50633 chip.
301
Linus Walleij14fa5692009-05-21 23:17:06 +0200302config AB3100_CORE
303 tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
304 depends on I2C
305 default y if ARCH_U300
306 help
307 Select this to enable the AB3100 Mixed Signal IC core
308 functionality. This connects to a AB3100 on the I2C bus
309 and expose a number of symbols needed for dependent devices
310 to read and write registers and subscribe to events from
311 this multi-functional IC. This is needed to use other features
312 of the AB3100 such as battery-backed RTC, charging control,
313 LEDs, vibrator, system power and temperature, power management
314 and ALSA sound.
315
Linus Walleij12992dd2009-08-18 22:52:26 +0200316config AB3100_OTP
317 tristate "ST-Ericsson AB3100 OTP functions"
318 depends on AB3100_CORE
319 default y if AB3100_CORE
320 help
321 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
322 programmable memory) support. This exposes a sysfs file to read
323 out OTP values.
324
Daniel Ribeiro13a09f92009-05-28 15:43:37 -0300325config EZX_PCAP
326 bool "PCAP Support"
327 depends on GENERIC_HARDIRQS && SPI_MASTER
328 help
329 This enables the PCAP ASIC present on EZX Phones. This is
330 needed for MMC, TouchScreen, Sound, USB, etc..
331
Haojian Zhuang4107da22009-09-17 08:54:03 -0400332config MFD_88PM8607
333 bool "Support Marvell 88PM8607"
Haojian Zhuang15e0ff72009-10-12 15:17:54 +0200334 depends on I2C=y
Haojian Zhuang4107da22009-09-17 08:54:03 -0400335 select MFD_CORE
336 help
337 This supports for Marvell 88PM8607 Power Management IC. This includes
338 the I2C driver and the core APIs _only_, you have to select
339 individual components like voltage regulators, RTC and
340 battery-charger under the corresponding menus.
341
Srinidhi Kasagar0c418392009-10-12 17:11:52 +0200342config AB4500_CORE
343 tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
344 depends on SPI
Srinidhi Kasagar0c418392009-10-12 17:11:52 +0200345 help
346 Select this option to enable access to AB4500 power management
347 chip. This connects to U8500 on the SSP/SPI bus and exports
348 read/write functions for the devices to get access to this chip.
349 This chip embeds various other multimedia funtionalities as well.
350
Richard Röjfors8edbede2010-02-04 08:18:52 -0300351config MFD_TIMBERDALE
352 tristate "Support for the Timberdale FPGA"
353 select MFD_CORE
Randy Dunlap546e29b62010-02-12 12:30:55 -0300354 depends on PCI && GPIOLIB
Richard Röjfors8edbede2010-02-04 08:18:52 -0300355 ---help---
356 This is the core driver for the timberdale FPGA. This device is a
357 multifunction device which exposes numerous platform devices.
358
359 The timberdale FPGA can be found on the Intel Atom development board
360 for in-vehicle infontainment, called Russellville.
Ben Dooksb6d64542007-02-20 13:58:01 -0800361endmenu
362
Russell Kinga4e137a2005-08-18 10:06:59 +0100363menu "Multimedia Capabilities Port drivers"
Adrian Bunkf751d502006-03-24 03:18:21 -0800364 depends on ARCH_SA1100
Russell Kinga4e137a2005-08-18 10:06:59 +0100365
366config MCP
367 tristate
368
Russell King5e742ad2005-08-18 10:08:15 +0100369# Interface drivers
370config MCP_SA11X0
371 tristate "Support SA11x0 MCP interface"
372 depends on ARCH_SA1100
373 select MCP
374
Russell King05c45ca2005-09-11 10:26:31 +0100375# Chip drivers
376config MCP_UCB1200
377 tristate "Support for UCB1200 / UCB1300"
378 depends on MCP
379
Russell Kingacb45432005-09-11 10:26:57 +0100380config MCP_UCB1200_TS
381 tristate "Touchscreen interface support"
382 depends on MCP_UCB1200 && INPUT
383
Russell Kinga4e137a2005-08-18 10:06:59 +0100384endmenu