blob: 6483ff696b5af529a0b83c3cb6f3fc1c39ab0e3c [file] [log] [blame]
Jean Delvaread2f9312005-07-02 18:15:49 +02001#
2# I2C Sensor chip drivers configuration
3#
4
5menu "Hardware Monitoring support"
6
7config HWMON
8 tristate "Hardware Monitoring support"
9 default y
10 help
11 Hardware monitoring devices let you monitor the hardware health
12 of a system. Most modern motherboards include such a device. It
13 can include temperature sensors, voltage sensors, fan speed
14 sensors and various additional features such as the ability to
Mark M. Hoffman12364412005-07-15 21:38:08 -040015 control the speed of the fans. If you want this support you
16 should say Y here and also to the specific driver(s) for your
17 sensors chip(s) below.
18
19 This support can also be built as a module. If so, the module
20 will be called hwmon.
Jean Delvaread2f9312005-07-02 18:15:49 +020021
22config SENSORS_ADM1021
23 tristate "Analog Devices ADM1021 and compatibles"
24 depends on HWMON && I2C
25 select I2C_SENSOR
26 help
27 If you say yes here you get support for Analog Devices ADM1021
28 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
29 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
30 and the XEON processor built-in sensor.
31
32 This driver can also be built as a module. If so, the module
33 will be called adm1021.
34
35config SENSORS_ADM1025
36 tristate "Analog Devices ADM1025 and compatibles"
37 depends on HWMON && I2C && EXPERIMENTAL
38 select I2C_SENSOR
39 help
40 If you say yes here you get support for Analog Devices ADM1025
41 and Philips NE1619 sensor chips.
42
43 This driver can also be built as a module. If so, the module
44 will be called adm1025.
45
46config SENSORS_ADM1026
47 tristate "Analog Devices ADM1026 and compatibles"
48 depends on HWMON && I2C && EXPERIMENTAL
49 select I2C_SENSOR
50 help
51 If you say yes here you get support for Analog Devices ADM1026
52 sensor chip.
53
54 This driver can also be built as a module. If so, the module
55 will be called adm1026.
56
57config SENSORS_ADM1031
58 tristate "Analog Devices ADM1031 and compatibles"
59 depends on HWMON && I2C && EXPERIMENTAL
60 select I2C_SENSOR
61 help
62 If you say yes here you get support for Analog Devices ADM1031
63 and ADM1030 sensor chips.
64
65 This driver can also be built as a module. If so, the module
66 will be called adm1031.
67
68config SENSORS_ADM9240
69 tristate "Analog Devices ADM9240 and compatibles"
70 depends on HWMON && I2C && EXPERIMENTAL
71 select I2C_SENSOR
72 help
73 If you say yes here you get support for Analog Devices ADM9240,
74 Dallas DS1780, National Semiconductor LM81 sensor chips.
75
76 This driver can also be built as a module. If so, the module
77 will be called adm9240.
78
79config SENSORS_ASB100
80 tristate "Asus ASB100 Bach"
81 depends on HWMON && I2C && EXPERIMENTAL
82 select I2C_SENSOR
83 help
84 If you say yes here you get support for the ASB100 Bach sensor
85 chip found on some Asus mainboards.
86
87 This driver can also be built as a module. If so, the module
88 will be called asb100.
89
90config SENSORS_ATXP1
91 tristate "Attansic ATXP1 VID controller"
92 depends on HWMON && I2C && EXPERIMENTAL
93 select I2C_SENSOR
94 help
95 If you say yes here you get support for the Attansic ATXP1 VID
96 controller.
97
98 If your board have such a chip, you are able to control your CPU
99 core and other voltages.
100
101 This driver can also be built as a module. If so, the module
102 will be called atxp1.
103
104config SENSORS_DS1621
105 tristate "Dallas Semiconductor DS1621 and DS1625"
106 depends on HWMON && I2C && EXPERIMENTAL
107 select I2C_SENSOR
108 help
109 If you say yes here you get support for Dallas Semiconductor
110 DS1621 and DS1625 sensor chips.
111
112 This driver can also be built as a module. If so, the module
113 will be called ds1621.
114
115config SENSORS_FSCHER
116 tristate "FSC Hermes"
117 depends on HWMON && I2C && EXPERIMENTAL
118 select I2C_SENSOR
119 help
120 If you say yes here you get support for Fujitsu Siemens
121 Computers Hermes sensor chips.
122
123 This driver can also be built as a module. If so, the module
124 will be called fscher.
125
126config SENSORS_FSCPOS
127 tristate "FSC Poseidon"
128 depends on HWMON && I2C && EXPERIMENTAL
129 select I2C_SENSOR
130 help
131 If you say yes here you get support for Fujitsu Siemens
132 Computers Poseidon sensor chips.
133
134 This driver can also be built as a module. If so, the module
135 will be called fscpos.
136
137config SENSORS_GL518SM
138 tristate "Genesys Logic GL518SM"
139 depends on HWMON && I2C
140 select I2C_SENSOR
141 help
142 If you say yes here you get support for Genesys Logic GL518SM
143 sensor chips.
144
145 This driver can also be built as a module. If so, the module
146 will be called gl518sm.
147
148config SENSORS_GL520SM
149 tristate "Genesys Logic GL520SM"
150 depends on HWMON && I2C && EXPERIMENTAL
151 select I2C_SENSOR
152 help
153 If you say yes here you get support for Genesys Logic GL520SM
154 sensor chips.
155
156 This driver can also be built as a module. If so, the module
157 will be called gl520sm.
158
159config SENSORS_IT87
160 tristate "ITE IT87xx and compatibles"
161 depends on HWMON && I2C
162 select I2C_SENSOR
Jean Delvare5042c7d2005-07-19 23:53:07 +0200163 select I2C_ISA
Jean Delvaread2f9312005-07-02 18:15:49 +0200164 help
165 If you say yes here you get support for ITE IT87xx sensor chips
166 and clones: SiS960.
167
168 This driver can also be built as a module. If so, the module
169 will be called it87.
170
171config SENSORS_LM63
172 tristate "National Semiconductor LM63"
173 depends on HWMON && I2C && EXPERIMENTAL
174 select I2C_SENSOR
175 help
176 If you say yes here you get support for the National Semiconductor
177 LM63 remote diode digital temperature sensor with integrated fan
178 control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
179 motherboard, among others.
180
181 This driver can also be built as a module. If so, the module
182 will be called lm63.
183
184config SENSORS_LM75
185 tristate "National Semiconductor LM75 and compatibles"
186 depends on HWMON && I2C
187 select I2C_SENSOR
188 help
189 If you say yes here you get support for National Semiconductor LM75
190 sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
191 9-bit precision mode), and TelCom (now Microchip) TCN75.
192
193 The DS75 and DS1775 in 10- to 12-bit precision modes will require
194 a force module parameter. The driver will not handle the extra
195 precision anyhow.
196
197 This driver can also be built as a module. If so, the module
198 will be called lm75.
199
200config SENSORS_LM77
201 tristate "National Semiconductor LM77"
202 depends on HWMON && I2C && EXPERIMENTAL
203 select I2C_SENSOR
204 help
205 If you say yes here you get support for National Semiconductor LM77
206 sensor chips.
207
208 This driver can also be built as a module. If so, the module
209 will be called lm77.
210
211config SENSORS_LM78
212 tristate "National Semiconductor LM78 and compatibles"
213 depends on HWMON && I2C && EXPERIMENTAL
214 select I2C_SENSOR
Jean Delvare5042c7d2005-07-19 23:53:07 +0200215 select I2C_ISA
Jean Delvaread2f9312005-07-02 18:15:49 +0200216 help
217 If you say yes here you get support for National Semiconductor LM78,
218 LM78-J and LM79.
219
220 This driver can also be built as a module. If so, the module
221 will be called lm78.
222
223config SENSORS_LM80
224 tristate "National Semiconductor LM80"
225 depends on HWMON && I2C && EXPERIMENTAL
226 select I2C_SENSOR
227 help
228 If you say yes here you get support for National Semiconductor
229 LM80 sensor chips.
230
231 This driver can also be built as a module. If so, the module
232 will be called lm80.
233
234config SENSORS_LM83
235 tristate "National Semiconductor LM83"
236 depends on HWMON && I2C
237 select I2C_SENSOR
238 help
239 If you say yes here you get support for National Semiconductor
240 LM83 sensor chips.
241
242 This driver can also be built as a module. If so, the module
243 will be called lm83.
244
245config SENSORS_LM85
246 tristate "National Semiconductor LM85 and compatibles"
247 depends on HWMON && I2C && EXPERIMENTAL
248 select I2C_SENSOR
249 help
250 If you say yes here you get support for National Semiconductor LM85
251 sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
252
253 This driver can also be built as a module. If so, the module
254 will be called lm85.
255
256config SENSORS_LM87
257 tristate "National Semiconductor LM87"
258 depends on HWMON && I2C && EXPERIMENTAL
259 select I2C_SENSOR
260 help
261 If you say yes here you get support for National Semiconductor LM87
262 sensor chips.
263
264 This driver can also be built as a module. If so, the module
265 will be called lm87.
266
267config SENSORS_LM90
268 tristate "National Semiconductor LM90 and compatibles"
269 depends on HWMON && I2C
270 select I2C_SENSOR
271 help
272 If you say yes here you get support for National Semiconductor LM90,
273 LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
274 MAX6658 sensor chips.
275
276 The Analog Devices ADT7461 sensor chip is also supported, but only
277 if found in ADM1032 compatibility mode.
278
279 This driver can also be built as a module. If so, the module
280 will be called lm90.
281
282config SENSORS_LM92
283 tristate "National Semiconductor LM92 and compatibles"
284 depends on HWMON && I2C && EXPERIMENTAL
285 select I2C_SENSOR
286 help
287 If you say yes here you get support for National Semiconductor LM92
288 and Maxim MAX6635 sensor chips.
289
290 This driver can also be built as a module. If so, the module
291 will be called lm92.
292
293config SENSORS_MAX1619
294 tristate "Maxim MAX1619 sensor chip"
295 depends on HWMON && I2C && EXPERIMENTAL
296 select I2C_SENSOR
297 help
298 If you say yes here you get support for MAX1619 sensor chip.
299
300 This driver can also be built as a module. If so, the module
301 will be called max1619.
302
303config SENSORS_PC87360
304 tristate "National Semiconductor PC87360 family"
305 depends on HWMON && I2C && EXPERIMENTAL
306 select I2C_SENSOR
307 select I2C_ISA
308 help
309 If you say yes here you get access to the hardware monitoring
310 functions of the National Semiconductor PC8736x Super-I/O chips.
311 The PC87360, PC87363 and PC87364 only have fan monitoring and
312 control. The PC87365 and PC87366 additionally have voltage and
313 temperature monitoring.
314
315 This driver can also be built as a module. If so, the module
316 will be called pc87360.
317
318config SENSORS_SIS5595
319 tristate "Silicon Integrated Systems Corp. SiS5595"
320 depends on HWMON && I2C && PCI && EXPERIMENTAL
321 select I2C_SENSOR
322 select I2C_ISA
323 help
324 If you say yes here you get support for the integrated sensors in
325 SiS5595 South Bridges.
326
327 This driver can also be built as a module. If so, the module
328 will be called sis5595.
329
330config SENSORS_SMSC47M1
331 tristate "SMSC LPC47M10x and compatibles"
332 depends on HWMON && I2C && EXPERIMENTAL
333 select I2C_SENSOR
334 select I2C_ISA
335 help
336 If you say yes here you get support for the integrated fan
337 monitoring and control capabilities of the SMSC LPC47B27x,
338 LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
339
340 This driver can also be built as a module. If so, the module
341 will be called smsc47m1.
342
343config SENSORS_SMSC47B397
344 tristate "SMSC LPC47B397-NC"
345 depends on HWMON && I2C && EXPERIMENTAL
346 select I2C_SENSOR
347 select I2C_ISA
348 help
349 If you say yes here you get support for the SMSC LPC47B397-NC
350 sensor chip.
351
352 This driver can also be built as a module. If so, the module
353 will be called smsc47b397.
354
355config SENSORS_VIA686A
356 tristate "VIA686A"
357 depends on HWMON && I2C && PCI
358 select I2C_SENSOR
359 select I2C_ISA
360 help
361 If you say yes here you get support for the integrated sensors in
362 Via 686A/B South Bridges.
363
364 This driver can also be built as a module. If so, the module
365 will be called via686a.
366
367config SENSORS_W83781D
368 tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
369 depends on HWMON && I2C
370 select I2C_SENSOR
Jean Delvare5042c7d2005-07-19 23:53:07 +0200371 select I2C_ISA
Jean Delvaread2f9312005-07-02 18:15:49 +0200372 help
373 If you say yes here you get support for the Winbond W8378x series
374 of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
375 and the similar Asus AS99127F.
376
377 This driver can also be built as a module. If so, the module
378 will be called w83781d.
379
R.Marek@sh.cvut.cz5563e272005-07-27 11:43:47 +0000380config SENSORS_W83792D
381 tristate "Winbond W83792D"
382 depends on HWMON && I2C && EXPERIMENTAL
383 select I2C_SENSOR
384 help
385 If you say yes here you get support for the Winbond W83792D chip.
386
387 This driver can also be built as a module. If so, the module
388 will be called w83792d.
389
Jean Delvaread2f9312005-07-02 18:15:49 +0200390config SENSORS_W83L785TS
391 tristate "Winbond W83L785TS-S"
392 depends on HWMON && I2C && EXPERIMENTAL
393 select I2C_SENSOR
394 help
395 If you say yes here you get support for the Winbond W83L785TS-S
396 sensor chip, which is used on the Asus A7N8X, among other
397 motherboards.
398
399 This driver can also be built as a module. If so, the module
400 will be called w83l785ts.
401
402config SENSORS_W83627HF
403 tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
404 depends on HWMON && I2C && EXPERIMENTAL
405 select I2C_SENSOR
406 select I2C_ISA
407 help
408 If you say yes here you get support for the Winbond W836X7 series
409 of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
410
411 This driver can also be built as a module. If so, the module
412 will be called w83627hf.
413
414config SENSORS_W83627EHF
415 tristate "Winbond W83627EHF"
416 depends on HWMON && I2C && EXPERIMENTAL
417 select I2C_SENSOR
418 select I2C_ISA
419 help
420 If you say yes here you get preliminary support for the hardware
421 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
422 Only fan and temperature inputs are supported at the moment, while
423 the chip does much more than that.
424
Jean Delvare8dd2d2c2005-07-27 21:33:15 +0200425 This driver also supports the W83627EHG, which is the lead-free
426 version of the W83627EHF.
427
Jean Delvaread2f9312005-07-02 18:15:49 +0200428 This driver can also be built as a module. If so, the module
429 will be called w83627ehf.
430
431config HWMON_DEBUG_CHIP
432 bool "Hardware Monitoring Chip debugging messages"
433 depends on HWMON
434 default n
435 help
436 Say Y here if you want the I2C chip drivers to produce a bunch of
437 debug messages to the system log. Select this if you are having
438 a problem with I2C support and want to see more of what is going
439 on.
440
441endmenu