blob: f13fd488ebec104c967539b9c610febf980bcf69 [file] [log] [blame]
Greg Kroah-Hartman502b95c2005-06-20 21:15:16 -07001This is the contents of some of the drivers/usb/serial/ files that had old
2changelog comments. They were quite old, and out of date, and we don't keep
3them anymore, so I've put them here, away from the source files, in case
4people still care to see them.
5
6- Greg Kroah-Hartman <greg@kroah.com> October 20, 2005
7
8-----------------------------------------------------------------------
9usb-serial.h Change Log comments:
10
11 (03/26/2002) gkh
12 removed the port->tty check from port_paranoia_check() due to serial
13 consoles not having a tty device assigned to them.
14
15 (12/03/2001) gkh
16 removed active from the port structure.
17 added documentation to the usb_serial_device_type structure
18
19 (10/10/2001) gkh
20 added vendor and product to serial structure. Needed to determine device
21 owner when the device is disconnected.
22
23 (05/30/2001) gkh
24 added sem to port structure and removed port_lock
25
26 (10/05/2000) gkh
27 Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
28 fix bug with urb->dev not being set properly, now that the usb core
29 needs it.
30
31 (09/11/2000) gkh
32 Added usb_serial_debug_data function to help get rid of #DEBUG in the
33 drivers.
34
35 (08/28/2000) gkh
36 Added port_lock to port structure.
37
38 (08/08/2000) gkh
39 Added open_count to port structure.
40
41 (07/23/2000) gkh
42 Added bulk_out_endpointAddress to port structure.
43
44 (07/19/2000) gkh, pberger, and borchers
45 Modifications to allow usb-serial drivers to be modules.
46
47-----------------------------------------------------------------------
48usb-serial.c Change Log comments:
49
50 (12/10/2002) gkh
51 Split the ports off into their own struct device, and added a
52 usb-serial bus driver.
53
54 (11/19/2002) gkh
55 removed a few #ifdefs for the generic code and cleaned up the failure
56 logic in initialization.
57
58 (10/02/2002) gkh
59 moved the console code to console.c and out of this file.
60
61 (06/05/2002) gkh
62 moved location of startup() call in serial_probe() until after all
63 of the port information and endpoints are initialized. This makes
64 things easier for some drivers.
65
66 (04/10/2002) gkh
67 added serial_read_proc function which creates a
68 /proc/tty/driver/usb-serial file.
69
70 (03/27/2002) gkh
71 Got USB serial console code working properly and merged into the main
72 version of the tree. Thanks to Randy Dunlap for the initial version
73 of this code, and for pushing me to finish it up.
74 The USB serial console works with any usb serial driver device.
75
76 (03/21/2002) gkh
77 Moved all manipulation of port->open_count into the core. Now the
78 individual driver's open and close functions are called only when the
79 first open() and last close() is called. Making the drivers a bit
80 smaller and simpler.
81 Fixed a bug if a driver didn't have the owner field set.
82
83 (02/26/2002) gkh
84 Moved all locking into the main serial_* functions, instead of having
85 the individual drivers have to grab the port semaphore. This should
86 reduce races.
87 Reworked the MOD_INC logic a bit to always increment and decrement, even
88 if the generic driver is being used.
89
90 (10/10/2001) gkh
91 usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
92 help prevent child drivers from accessing the device since it is now
93 gone.
94
95 (09/13/2001) gkh
96 Moved generic driver initialize after we have registered with the USB
97 core. Thanks to Randy Dunlap for pointing this problem out.
98
99 (07/03/2001) gkh
100 Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
101 Fixed vendor and product getting defined through the MODULE_PARM macro
102 if the Generic driver wasn't compiled in.
103 Fixed problem with generic_shutdown() not being called for drivers that
104 don't have a shutdown() function.
105
106 (06/06/2001) gkh
107 added evil hack that is needed for the prolific pl2303 device due to the
108 crazy way its endpoints are set up.
109
110 (05/30/2001) gkh
111 switched from using spinlock to a semaphore, which fixes lots of problems.
112
113 (04/08/2001) gb
114 Identify version on module load.
115
116 2001_02_05 gkh
117 Fixed buffer overflows bug with the generic serial driver. Thanks to
118 Todd Squires <squirest@ct0.com> for fixing this.
119
120 (01/10/2001) gkh
121 Fixed bug where the generic serial adaptor grabbed _any_ device that was
122 offered to it.
123
124 (12/12/2000) gkh
125 Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
126 moved them to the serial_open and serial_close functions.
127 Also fixed bug with there not being a MOD_DEC for the generic driver
128 (thanks to Gary Brubaker for finding this.)
129
130 (11/29/2000) gkh
131 Small NULL pointer initialization cleanup which saves a bit of disk image
132
133 (11/01/2000) Adam J. Richter
134 instead of using idVendor/idProduct pairs, usb serial drivers
135 now identify their hardware interest with usb_device_id tables,
136 which they usually have anyhow for use with MODULE_DEVICE_TABLE.
137
138 (10/05/2000) gkh
139 Fixed bug with urb->dev not being set properly, now that the usb
140 core needs it.
141
142 (09/11/2000) gkh
143 Removed DEBUG #ifdefs with call to usb_serial_debug_data
144
145 (08/28/2000) gkh
146 Added port_lock to port structure.
147 Added locks for SMP safeness to generic driver
148 Fixed the ability to open a generic device's port more than once.
149
150 (07/23/2000) gkh
151 Added bulk_out_endpointAddress to port structure.
152
153 (07/19/2000) gkh, pberger, and borchers
154 Modifications to allow usb-serial drivers to be modules.
155
156 (07/03/2000) gkh
157 Added more debugging to serial_ioctl call
158
159 (06/25/2000) gkh
160 Changed generic_write_bulk_callback to not call wake_up_interruptible
161 directly, but to have port_softint do it at a safer time.
162
163 (06/23/2000) gkh
164 Cleaned up debugging statements in a quest to find UHCI timeout bug.
165
166 (05/22/2000) gkh
167 Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
168 removed from the individual device source files.
169
170 (05/03/2000) gkh
171 Added the Digi Acceleport driver from Al Borchers and Peter Berger.
172
173 (05/02/2000) gkh
174 Changed devfs and tty register code to work properly now. This was based on
175 the ACM driver changes by Vojtech Pavlik.
176
177 (04/27/2000) Ryan VanderBijl
178 Put calls to *_paranoia_checks into one function.
179
180 (04/23/2000) gkh
181 Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
182 Moved when the startup code printed out the devices that are supported.
183
184 (04/19/2000) gkh
185 Added driver for ZyXEL omni.net lcd plus ISDN TA
186 Made startup info message specify which drivers were compiled in.
187
188 (04/03/2000) gkh
189 Changed the probe process to remove the module unload races.
190 Changed where the tty layer gets initialized to have devfs work nicer.
191 Added initial devfs support.
192
193 (03/26/2000) gkh
194 Split driver up into device specific pieces.
195
196 (03/19/2000) gkh
197 Fixed oops that could happen when device was removed while a program
198 was talking to the device.
199 Removed the static urbs and now all urbs are created and destroyed
200 dynamically.
201 Reworked the internal interface. Now everything is based on the
202 usb_serial_port structure instead of the larger usb_serial structure.
203 This fixes the bug that a multiport device could not have more than
204 one port open at one time.
205
206 (03/17/2000) gkh
207 Added config option for debugging messages.
208 Added patch for keyspan pda from Brian Warner.
209
210 (03/06/2000) gkh
211 Added the keyspan pda code from Brian Warner <warner@lothar.com>
212 Moved a bunch of the port specific stuff into its own structure. This
213 is in anticipation of the true multiport devices (there's a bug if you
214 try to access more than one port of any multiport device right now)
215
216 (02/21/2000) gkh
217 Made it so that any serial devices only have to specify which functions
218 they want to overload from the generic function calls (great,
219 inheritance in C, in a driver, just what I wanted...)
220 Added support for set_termios and ioctl function calls. No drivers take
221 advantage of this yet.
222 Removed the #ifdef MODULE, now there is no module specific code.
223 Cleaned up a few comments in usb-serial.h that were wrong (thanks again
224 to Miles Lott).
225 Small fix to get_free_serial.
226
227 (02/14/2000) gkh
228 Removed the Belkin and Peracom functionality from the driver due to
229 the lack of support from the vendor, and me not wanting people to
230 accidenatly buy the device, expecting it to work with Linux.
231 Added read_bulk_callback and write_bulk_callback to the type structure
232 for the needs of the FTDI and WhiteHEAT driver.
233 Changed all reverences to FTDI to FTDI_SIO at the request of Bill
234 Ryder.
235 Changed the output urb size back to the max endpoint size to make
236 the ftdi_sio driver have it easier, and due to the fact that it didn't
237 really increase the speed any.
238
239 (02/11/2000) gkh
240 Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
241 patch from Miles Lott (milos@insync.net).
242 Fixed bug with not restoring the minor range that a device grabs, if
243 the startup function fails (thanks Miles for finding this).
244
245 (02/05/2000) gkh
246 Added initial framework for the Keyspan PDA serial converter so that
247 Brian Warner has a place to put his code.
248 Made the ezusb specific functions generic enough that different
249 devices can use them (whiteheat and keyspan_pda both need them).
250 Split out a whole bunch of structure and other stuff to a separate
251 usb-serial.h file.
252 Made the Visor connection messages a little more understandable, now
253 that Miles Lott (milos@insync.net) has gotten the Generic channel to
254 work. Also made them always show up in the log file.
255
256 (01/25/2000) gkh
257 Added initial framework for FTDI serial converter so that Bill Ryder
258 has a place to put his code.
259 Added the vendor specific info from Handspring. Now we can print out
260 informational debug messages as well as understand what is happening.
261
262 (01/23/2000) gkh
263 Fixed problem of crash when trying to open a port that didn't have a
264 device assigned to it. Made the minor node finding a little smarter,
265 now it looks to find a continuous space for the new device.
266
267 (01/21/2000) gkh
268 Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
269 Fixed get_serial_by_minor which was all messed up for multi port
270 devices. Fixed multi port problem for generic devices. Now the number
271 of ports is determined by the number of bulk out endpoints for the
272 generic device.
273
274 (01/19/2000) gkh
275 Removed lots of cruft that was around from the old (pre urb) driver
276 interface.
277 Made the serial_table dynamic. This should save lots of memory when
278 the number of minor nodes goes up to 256.
279 Added initial support for devices that have more than one port.
280 Added more debugging comments for the Visor, and added a needed
281 set_configuration call.
282
283 (01/17/2000) gkh
284 Fixed the WhiteHEAT firmware (my processing tool had a bug)
285 and added new debug loader firmware for it.
286 Removed the put_char function as it isn't really needed.
287 Added visor startup commands as found by the Win98 dump.
288
289 (01/13/2000) gkh
290 Fixed the vendor id for the generic driver to the one I meant it to be.
291
292 (01/12/2000) gkh
293 Forget the version numbering...that's pretty useless...
294 Made the driver able to be compiled so that the user can select which
295 converter they want to use. This allows people who only want the Visor
296 support to not pay the memory size price of the WhiteHEAT.
297 Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
298 grabbed the root hub. Not good.
299
300 version 0.4.0 (01/10/2000) gkh
301 Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
302 device. Added startup function to allow firmware to be downloaded to
303 a device if it needs to be.
304 Added firmware download logic to the WhiteHEAT device.
305 Started to add #defines to split up the different drivers for potential
306 configuration option.
307
308 version 0.3.1 (12/30/99) gkh
309 Fixed problems with urb for bulk out.
310 Added initial support for multiple sets of endpoints. This enables
311 the Handspring Visor to be attached successfully. Only the first
312 bulk in / bulk out endpoint pair is being used right now.
313
314 version 0.3.0 (12/27/99) gkh
315 Added initial support for the Handspring Visor based on a patch from
316 Miles Lott (milos@sneety.insync.net)
317 Cleaned up the code a bunch and converted over to using urbs only.
318
319 version 0.2.3 (12/21/99) gkh
320 Added initial support for the Connect Tech WhiteHEAT converter.
321 Incremented the number of ports in expectation of getting the
322 WhiteHEAT to work properly (4 ports per connection).
323 Added notification on insertion and removal of what port the
324 device is/was connected to (and what kind of device it was).
325
326 version 0.2.2 (12/16/99) gkh
327 Changed major number to the new allocated number. We're legal now!
328
329 version 0.2.1 (12/14/99) gkh
330 Fixed bug that happens when device node is opened when there isn't a
331 device attached to it. Thanks to marek@webdesign.no for noticing this.
332
333 version 0.2.0 (11/10/99) gkh
334 Split up internals to make it easier to add different types of serial
335 converters to the code.
336 Added a "generic" driver that gets it's vendor and product id
337 from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
338 for the idea and sample code (from the usb scanner driver.)
339 Cleared up any licensing questions by releasing it under the GNU GPL.
340
341 version 0.1.2 (10/25/99) gkh
342 Fixed bug in detecting device.
343
344 version 0.1.1 (10/05/99) gkh
345 Changed the major number to not conflict with anything else.
346
347 version 0.1 (09/28/99) gkh
348 Can recognize the two different devices and start up a read from
349 device when asked to. Writes also work. No control signals yet, this
350 all is vendor specific data (i.e. no spec), also no control for
351 different baud rates or other bit settings.
352 Currently we are using the same devid as the acm driver. This needs
353 to change.
354
355-----------------------------------------------------------------------
356visor.c Change Log comments:
357
358 (06/03/2003) Judd Montgomery <judd at jpilot.org>
359 Added support for module parameter options for untested/unknown
360 devices.
361
362 (03/09/2003) gkh
363 Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
364 <brachtl@redgrep.cz> for the information.
365
366 (03/05/2003) gkh
367 Think Treo support is now working.
368
369 (04/03/2002) gkh
370 Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
371 <hiro@zob.ne.jp> for the information.
372
373 (03/27/2002) gkh
374 Removed assumptions that port->tty was always valid (is not true
375 for usb serial console devices.)
376
377 (03/23/2002) gkh
378 Added support for the Palm i705 device, thanks to Thomas Riemer
379 <tom@netmech.com> for the information.
380
381 (03/21/2002) gkh
382 Added support for the Palm m130 device, thanks to Udo Eisenbarth
383 <udo.eisenbarth@web.de> for the information.
384
385 (02/27/2002) gkh
386 Reworked the urb handling logic. We have no more pool, but dynamically
387 allocate the urb and the transfer buffer on the fly. In testing this
388 does not incure any measurable overhead. This also relies on the fact
389 that we have proper reference counting logic for urbs.
390
391 (02/21/2002) SilaS
392 Added initial support for the Palm m515 devices.
393
394 (02/14/2002) gkh
395 Added support for the Clie S-360 device.
396
397 (12/18/2001) gkh
398 Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
399 for the patch.
400
401 (11/11/2001) gkh
402 Added support for the m125 devices, and added check to prevent oopses
Jan Engelhardt96de0e22007-10-19 23:21:04 +0200403 for Clié devices that lie about the number of ports they have.
Greg Kroah-Hartman502b95c2005-06-20 21:15:16 -0700404
405 (08/30/2001) gkh
406 Added support for the Clie devices, both the 3.5 and 4.0 os versions.
407 Many thanks to Daniel Burke, and Bryan Payne for helping with this.
408
409 (08/23/2001) gkh
410 fixed a few potential bugs pointed out by Oliver Neukum.
411
412 (05/30/2001) gkh
413 switched from using spinlock to a semaphore, which fixes lots of problems.
414
415 (05/28/2000) gkh
416 Added initial support for the Palm m500 and Palm m505 devices.
417
418 (04/08/2001) gb
419 Identify version on module load.
420
421 (01/21/2000) gkh
422 Added write_room and chars_in_buffer, as they were previously using the
423 generic driver versions which is all wrong now that we are using an urb
424 pool. Thanks to Wolfgang Grandegger for pointing this out to me.
425 Removed count assignment in the write function, which was not needed anymore
426 either. Thanks to Al Borchers for pointing this out.
427
428 (12/12/2000) gkh
429 Moved MOD_DEC to end of visor_close to be nicer, as the final write
430 message can sleep.
431
432 (11/12/2000) gkh
433 Fixed bug with data being dropped on the floor by forcing tty->low_latency
434 to be on. Hopefully this fixes the OHCI issue!
435
436 (11/01/2000) Adam J. Richter
437 usb_device_id table support
438
439 (10/05/2000) gkh
440 Fixed bug with urb->dev not being set properly, now that the usb
441 core needs it.
442
443 (09/11/2000) gkh
444 Got rid of always calling kmalloc for every urb we wrote out to the
445 device.
446 Added visor_read_callback so we can keep track of bytes in and out for
447 those people who like to know the speed of their device.
448 Removed DEBUG #ifdefs with call to usb_serial_debug_data
449
450 (09/06/2000) gkh
451 Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
452 the host controller drivers set urb->dev = NULL when the urb is finished.
453
454 (08/28/2000) gkh
455 Added locks for SMP safeness.
456
457 (08/08/2000) gkh
458 Fixed endian problem in visor_startup.
459 Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
460 than once.
461
462 (07/23/2000) gkh
463 Added pool of write urbs to speed up transfers to the visor.
464
465 (07/19/2000) gkh
466 Added module_init and module_exit functions to handle the fact that this
467 driver is a loadable module now.
468
469 (07/03/2000) gkh
470 Added visor_set_ioctl and visor_set_termios functions (they don't do much
471 of anything, but are good for debugging.)
472
473 (06/25/2000) gkh
474 Fixed bug in visor_unthrottle that should help with the disconnect in PPP
475 bug that people have been reporting.
476
477 (06/23/2000) gkh
478 Cleaned up debugging statements in a quest to find UHCI timeout bug.
479
480 (04/27/2000) Ryan VanderBijl
481 Fixed memory leak in visor_close
482
483 (03/26/2000) gkh
484 Split driver up into device specific pieces.
485
486-----------------------------------------------------------------------
487pl2303.c Change Log comments:
488
489 2002_Mar_26 gkh
490 allowed driver to work properly if there is no tty assigned to a port
491 (this happens for serial console devices.)
492
493 2001_Oct_06 gkh
494 Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
495
496 2001_Sep_19 gkh
497 Added break support.
498
499 2001_Aug_30 gkh
500 fixed oops in write_bulk_callback.
501
502 2001_Aug_28 gkh
503 reworked buffer logic to be like other usb-serial drivers. Hopefully
504 removing some reported problems.
505
506 2001_Jun_06 gkh
507 finished porting to 2.4 format.
508
509
510-----------------------------------------------------------------------
511io_edgeport.c Change Log comments:
512
513 2003_04_03 al borchers
514 - fixed a bug (that shows up with dosemu) where the tty struct is
515 used in a callback after it has been freed
516
517 2.3 2002_03_08 greg kroah-hartman
518 - fixed bug when multiple devices were attached at the same time.
519
520 2.2 2001_11_14 greg kroah-hartman
521 - fixed bug in edge_close that kept the port from being used more
522 than once.
523 - fixed memory leak on device removal.
524 - fixed potential double free of memory when command urb submitting
525 failed.
526 - other small cleanups when the device is removed
527
528 2.1 2001_07_09 greg kroah-hartman
529 - added support for TIOCMBIS and TIOCMBIC.
530
531 (04/08/2001) gb
532 - Identify version on module load.
533
534 2.0 2001_03_05 greg kroah-hartman
535 - reworked entire driver to fit properly in with the other usb-serial
536 drivers. Occasional oopses still happen, but it's a good start.
537
538 1.2.3 (02/23/2001) greg kroah-hartman
539 - changed device table to work properly for 2.4.x final format.
540 - fixed problem with dropping data at high data rates.
541
542 1.2.2 (11/27/2000) greg kroah-hartman
543 - cleaned up more NTisms.
544 - Added device table for 2.4.0-test11
545
546 1.2.1 (11/08/2000) greg kroah-hartman
547 - Started to clean up NTisms.
548 - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
549
550 1.2 (10/17/2000) David Iacovelli
551 Remove all EPIC code and GPL source
552 Fix RELEVANT_IFLAG macro to include flow control
553 changes port configuration changes.
554 Fix redefinition of SERIAL_MAGIC
555 Change all timeout values to 5 seconds
556 Tried to fix the UHCI multiple urb submission, but failed miserably.
557 it seems to work fine with OHCI.
558 ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
559 find a way to work arount this UHCI bug )
560
561 1.1 (10/11/2000) David Iacovelli
562 Fix XON/XOFF flow control to support both IXON and IXOFF
563
564 0.9.27 (06/30/2000) David Iacovelli
565 Added transmit queue and now allocate urb for command writes.
566
567 0.9.26 (06/29/2000) David Iacovelli
568 Add support for 80251 based edgeport
569
570 0.9.25 (06/27/2000) David Iacovelli
571 Do not close the port if it has multiple opens.
572
573 0.9.24 (05/26/2000) David Iacovelli
574 Add IOCTLs to support RXTX and JAVA POS
575 and first cut at running BlackBox Demo
576
577 0.9.23 (05/24/2000) David Iacovelli
578 Add IOCTLs to support RXTX and JAVA POS
579
580 0.9.22 (05/23/2000) David Iacovelli
581 fixed bug in enumeration. If epconfig turns on mapping by
582 path after a device is already plugged in, we now update
583 the mapping correctly
584
585 0.9.21 (05/16/2000) David Iacovelli
586 Added BlockUntilChaseResp() to also wait for txcredits
587 Updated the way we allocate and handle write URBs
588 Add debug code to dump buffers
589
590 0.9.20 (05/01/2000) David Iacovelli
591 change driver to use usb/tts/
592
593 0.9.19 (05/01/2000) David Iacovelli
594 Update code to compile if DEBUG is off
595
596 0.9.18 (04/28/2000) David Iacovelli
597 cleanup and test tty_register with devfs
598
599 0.9.17 (04/27/2000) greg kroah-hartman
600 changed tty_register around to be like the way it
601 was before, but now it works properly with devfs.
602
603 0.9.16 (04/26/2000) david iacovelli
604 Fixed bug in GetProductInfo()
605
606 0.9.15 (04/25/2000) david iacovelli
607 Updated enumeration
608
609 0.9.14 (04/24/2000) david iacovelli
610 Removed all config/status IOCTLS and
611 converted to using /proc/edgeport
612 still playing with devfs
613
614 0.9.13 (04/24/2000) david iacovelli
615 Removed configuration based on ttyUSB0
616 Added support for configuration using /prod/edgeport
617 first attempt at using devfs (not working yet!)
618 Added IOCTL to GetProductInfo()
619 Added support for custom baud rates
620 Add support for random port numbers
621
622 0.9.12 (04/18/2000) david iacovelli
623 added additional configuration IOCTLs
624 use ttyUSB0 for configuration
625
626 0.9.11 (04/17/2000) greg kroah-hartman
627 fixed module initialization race conditions.
628 made all urbs dynamically allocated.
629 made driver devfs compatible. now it only registers the tty device
630 when the device is actually plugged in.
631
632 0.9.10 (04/13/2000) greg kroah-hartman
633 added proc interface framework.
634
635 0.9.9 (04/13/2000) david iacovelli
636 added enumeration code and ioctls to configure the device
637
638 0.9.8 (04/12/2000) david iacovelli
639 Change interrupt read start when device is plugged in
640 and stop when device is removed
641 process interrupt reads when all ports are closed
642 (keep value of rxBytesAvail consistent with the edgeport)
643 set the USB_BULK_QUEUE flag so that we can shove a bunch
644 of urbs at once down the pipe
645
646 0.9.7 (04/10/2000) david iacovelli
647 start to add enumeration code.
648 generate serial number for epic devices
649 add support for kdb
650
651 0.9.6 (03/30/2000) david iacovelli
652 add IOCTL to get string, manufacture, and boot descriptors
653
654 0.9.5 (03/14/2000) greg kroah-hartman
655 more error checking added to SerialOpen to try to fix UHCI open problem
656
657 0.9.4 (03/09/2000) greg kroah-hartman
658 added more error checking to handle oops when data is hanging
659 around and tty is abruptly closed.
660
661 0.9.3 (03/09/2000) david iacovelli
662 Add epic support for xon/xoff chars
663 play with performance
664
665 0.9.2 (03/08/2000) greg kroah-hartman
666 changed most "info" calls to "dbg"
667 implemented flow control properly in the termios call
668
669 0.9.1 (03/08/2000) david iacovelli
670 added EPIC support
671 enabled bootloader update
672
673 0.9 (03/08/2000) greg kroah-hartman
674 Release to IO networks.
675 Integrated changes that David made
676 made getting urbs for writing SMP safe
677
678 0.8 (03/07/2000) greg kroah-hartman
679 Release to IO networks.
680 Fixed problems that were seen in code by David.
681 Now both Edgeport/4 and Edgeport/2 works properly.
682 Changed most of the functions to use port instead of serial.
683
684 0.7 (02/27/2000) greg kroah-hartman
685 Milestone 3 release.
686 Release to IO Networks
687 ioctl for waiting on line change implemented.
688 ioctl for getting statistics implemented.
689 multiport support working.
690 lsr and msr registers are now handled properly.
691 change break now hooked up and working.
692 support for all known Edgeport devices.
693
694 0.6 (02/22/2000) greg kroah-hartman
695 Release to IO networks.
696 CHASE is implemented correctly when port is closed.
697 SerialOpen now blocks correctly until port is fully opened.
698
699 0.5 (02/20/2000) greg kroah-hartman
700 Release to IO networks.
701 Known problems:
702 modem status register changes are not sent on to the user
703 CHASE is not implemented when the port is closed.
704
705 0.4 (02/16/2000) greg kroah-hartman
706 Second cut at the CeBit demo.
707 Doesn't leak memory on every write to the port
708 Still small leaks on startup.
709 Added support for Edgeport/2 and Edgeport/8
710
711 0.3 (02/15/2000) greg kroah-hartman
712 CeBit demo release.
713 Force the line settings to 4800, 8, 1, e for the demo.
714 Warning! This version leaks memory like crazy!
715
716 0.2 (01/30/2000) greg kroah-hartman
717 Milestone 1 release.
Nick Andrew877d0312009-01-26 11:06:57 +0100718 Device is found by USB subsystem, enumerated, firmware is downloaded
Greg Kroah-Hartman502b95c2005-06-20 21:15:16 -0700719 and the descriptors are printed to the debug log, config is set, and
720 green light starts to blink. Open port works, and data can be sent
721 and received at the default settings of the UART. Loopback connector
722 and debug log confirms this.
723
724 0.1 (01/23/2000) greg kroah-hartman
725 Initial release to help IO Networks try to set up their test system.
726 Edgeport4 is recognized, firmware is downloaded, config is set so
727 device blinks green light every 3 sec. Port is bound, but opening,
728 closing, and sending data do not work properly.
729
730