| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | #define SUSBCRequest_SetBaudRateParityAndStopBits 1 |
| 2 | #define SUSBCR_SBR_MASK 0xFF00 |
| 3 | #define SUSBCR_SBR_1200 0x0100 |
| 4 | #define SUSBCR_SBR_9600 0x0200 |
| 5 | #define SUSBCR_SBR_19200 0x0400 |
| 6 | #define SUSBCR_SBR_28800 0x0800 |
| 7 | #define SUSBCR_SBR_38400 0x1000 |
| 8 | #define SUSBCR_SBR_57600 0x2000 |
| 9 | #define SUSBCR_SBR_115200 0x4000 |
| 10 | |
| 11 | #define SUSBCR_SPASB_MASK 0x0070 |
| 12 | #define SUSBCR_SPASB_NoParity 0x0010 |
| 13 | #define SUSBCR_SPASB_OddParity 0x0020 |
| 14 | #define SUSBCR_SPASB_EvenParity 0x0040 |
| 15 | |
| 16 | #define SUSBCR_SPASB_STPMASK 0x0003 |
| 17 | #define SUSBCR_SPASB_1StopBit 0x0001 |
| 18 | #define SUSBCR_SPASB_2StopBits 0x0002 |
| 19 | |
| 20 | #define SUSBCRequest_SetStatusLinesOrQueues 2 |
| 21 | #define SUSBCR_SSL_SETRTS 0x0001 |
| 22 | #define SUSBCR_SSL_CLRRTS 0x0002 |
| 23 | #define SUSBCR_SSL_SETDTR 0x0004 |
| 24 | #define SUSBCR_SSL_CLRDTR 0x0010 |
| 25 | |
| 26 | #define SUSBCR_SSL_PURGE_TXABORT 0x0100 // Kill the pending/current writes to the comm port. |
| 27 | #define SUSBCR_SSL_PURGE_RXABORT 0x0200 // Kill the pending/current reads to the comm port. |
| 28 | #define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 // Kill the transmit queue if there. |
| 29 | #define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 // Kill the typeahead buffer if there. |
| 30 | |
| 31 | #define SUSBCRequest_GetStatusLineState 4 |
| 32 | #define SUSBCR_GSL_RXCHAR 0x0001 // Any Character received |
| 33 | #define SUSBCR_GSL_TXEMPTY 0x0004 // Transmitt Queue Empty |
| 34 | #define SUSBCR_GSL_CTS 0x0008 // CTS changed state |
| 35 | #define SUSBCR_GSL_DSR 0x0010 // DSR changed state |
| 36 | #define SUSBCR_GSL_RLSD 0x0020 // RLSD changed state |
| 37 | #define SUSBCR_GSL_BREAK 0x0040 // BREAK received |
| 38 | #define SUSBCR_GSL_ERR 0x0080 // Line status error occurred |
| 39 | #define SUSBCR_GSL_RING 0x0100 // Ring signal detected |
| 40 | |
| 41 | #define SUSBCRequest_Misc 8 |
| 42 | #define SUSBCR_MSC_ResetReader 0x0001 // use a predefined reset sequence |
| 43 | #define SUSBCR_MSC_ResetAllQueues 0x0002 // use a predefined sequence to reset the internal queues |
| 44 | |
| 45 | #define SUSBCRequest_GetMisc 0x10 |
| 46 | #define SUSBCR_MSC_GetFWVersion 0x0001 /* get the firmware version from device, |
| 47 | coded like this 0xHHLLBBPP |
| 48 | with HH = Firmware Version High Byte |
| 49 | LL = Firmware Version Low Byte |
| 50 | BB = Build Number |
| 51 | PP = Further Attributes |
| 52 | */ |
| 53 | |
| 54 | #define SUSBCR_MSC_GetHWVersion 0x0002 /* get the hardware version from device |
| 55 | coded like this 0xHHLLPPRR |
| 56 | with HH = Software Version High Byte |
| 57 | LL = Software Version Low Byte |
| 58 | PP = Further Attributes |
| 59 | RR = Reserved for the hardware ID |
| 60 | */ |