blob: 027096fe6a124dc9edde55da90517c5daac38747 [file] [log] [blame]
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +02001/*
2 * Virtio-based remote processor messaging bus
3 *
4 * Copyright (C) 2011 Texas Instruments, Inc.
5 * Copyright (C) 2011 Google, Inc.
6 *
7 * Ohad Ben-Cohen <ohad@wizery.com>
8 * Brian Swetland <swetland@google.com>
9 *
10 * This software is licensed under the terms of the GNU General Public
11 * License version 2, as published by the Free Software Foundation, and
12 * may be copied, distributed, and modified under those terms.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19
20#define pr_fmt(fmt) "%s: " fmt, __func__
21
22#include <linux/kernel.h>
23#include <linux/module.h>
24#include <linux/virtio.h>
25#include <linux/virtio_ids.h>
26#include <linux/virtio_config.h>
27#include <linux/scatterlist.h>
28#include <linux/dma-mapping.h>
29#include <linux/slab.h>
30#include <linux/idr.h>
31#include <linux/jiffies.h>
32#include <linux/sched.h>
33#include <linux/wait.h>
34#include <linux/rpmsg.h>
35#include <linux/mutex.h>
36
37/**
38 * struct virtproc_info - virtual remote processor state
39 * @vdev: the virtio device
40 * @rvq: rx virtqueue
41 * @svq: tx virtqueue
42 * @rbufs: kernel address of rx buffers
43 * @sbufs: kernel address of tx buffers
44 * @last_sbuf: index of last tx buffer used
45 * @bufs_dma: dma base addr of the buffers
46 * @tx_lock: protects svq, sbufs and sleepers, to allow concurrent senders.
47 * sending a message might require waking up a dozing remote
48 * processor, which involves sleeping, hence the mutex.
49 * @endpoints: idr of local endpoints, allows fast retrieval
50 * @endpoints_lock: lock of the endpoints set
51 * @sendq: wait queue of sending contexts waiting for a tx buffers
52 * @sleepers: number of senders that are waiting for a tx buffer
53 * @ns_ept: the bus's name service endpoint
54 *
55 * This structure stores the rpmsg state of a given virtio remote processor
56 * device (there might be several virtio proc devices for each physical
57 * remote processor).
58 */
59struct virtproc_info {
60 struct virtio_device *vdev;
61 struct virtqueue *rvq, *svq;
62 void *rbufs, *sbufs;
63 int last_sbuf;
64 dma_addr_t bufs_dma;
65 struct mutex tx_lock;
66 struct idr endpoints;
67 struct mutex endpoints_lock;
68 wait_queue_head_t sendq;
69 atomic_t sleepers;
70 struct rpmsg_endpoint *ns_ept;
71};
72
73/**
74 * struct rpmsg_channel_info - internal channel info representation
75 * @name: name of service
76 * @src: local address
77 * @dst: destination address
78 */
79struct rpmsg_channel_info {
80 char name[RPMSG_NAME_SIZE];
81 u32 src;
82 u32 dst;
83};
84
85#define to_rpmsg_channel(d) container_of(d, struct rpmsg_channel, dev)
86#define to_rpmsg_driver(d) container_of(d, struct rpmsg_driver, drv)
87
88/*
89 * We're allocating 512 buffers of 512 bytes for communications, and then
90 * using the first 256 buffers for RX, and the last 256 buffers for TX.
91 *
92 * Each buffer will have 16 bytes for the msg header and 496 bytes for
93 * the payload.
94 *
95 * This will require a total space of 256KB for the buffers.
96 *
97 * We might also want to add support for user-provided buffers in time.
98 * This will allow bigger buffer size flexibility, and can also be used
99 * to achieve zero-copy messaging.
100 *
101 * Note that these numbers are purely a decision of this driver - we
102 * can change this without changing anything in the firmware of the remote
103 * processor.
104 */
105#define RPMSG_NUM_BUFS (512)
106#define RPMSG_BUF_SIZE (512)
107#define RPMSG_TOTAL_BUF_SPACE (RPMSG_NUM_BUFS * RPMSG_BUF_SIZE)
108
109/*
110 * Local addresses are dynamically allocated on-demand.
111 * We do not dynamically assign addresses from the low 1024 range,
112 * in order to reserve that address range for predefined services.
113 */
114#define RPMSG_RESERVED_ADDRESSES (1024)
115
116/* Address 53 is reserved for advertising remote services */
117#define RPMSG_NS_ADDR (53)
118
119/* sysfs show configuration fields */
120#define rpmsg_show_attr(field, path, format_string) \
121static ssize_t \
122field##_show(struct device *dev, \
123 struct device_attribute *attr, char *buf) \
124{ \
125 struct rpmsg_channel *rpdev = to_rpmsg_channel(dev); \
126 \
127 return sprintf(buf, format_string, rpdev->path); \
128}
129
130/* for more info, see Documentation/ABI/testing/sysfs-bus-rpmsg */
131rpmsg_show_attr(name, id.name, "%s\n");
132rpmsg_show_attr(src, src, "0x%x\n");
133rpmsg_show_attr(dst, dst, "0x%x\n");
134rpmsg_show_attr(announce, announce ? "true" : "false", "%s\n");
135
136/*
137 * Unique (and free running) index for rpmsg devices.
138 *
139 * Yeah, we're not recycling those numbers (yet?). will be easy
140 * to change if/when we want to.
141 */
142static unsigned int rpmsg_dev_index;
143
144static ssize_t modalias_show(struct device *dev,
145 struct device_attribute *attr, char *buf)
146{
147 struct rpmsg_channel *rpdev = to_rpmsg_channel(dev);
148
149 return sprintf(buf, RPMSG_DEVICE_MODALIAS_FMT "\n", rpdev->id.name);
150}
151
152static struct device_attribute rpmsg_dev_attrs[] = {
153 __ATTR_RO(name),
154 __ATTR_RO(modalias),
155 __ATTR_RO(dst),
156 __ATTR_RO(src),
157 __ATTR_RO(announce),
158 __ATTR_NULL
159};
160
161/* rpmsg devices and drivers are matched using the service name */
162static inline int rpmsg_id_match(const struct rpmsg_channel *rpdev,
163 const struct rpmsg_device_id *id)
164{
165 return strncmp(id->name, rpdev->id.name, RPMSG_NAME_SIZE) == 0;
166}
167
168/* match rpmsg channel and rpmsg driver */
169static int rpmsg_dev_match(struct device *dev, struct device_driver *drv)
170{
171 struct rpmsg_channel *rpdev = to_rpmsg_channel(dev);
172 struct rpmsg_driver *rpdrv = to_rpmsg_driver(drv);
173 const struct rpmsg_device_id *ids = rpdrv->id_table;
174 unsigned int i;
175
176 for (i = 0; ids[i].name[0]; i++)
177 if (rpmsg_id_match(rpdev, &ids[i]))
178 return 1;
179
180 return 0;
181}
182
183static int rpmsg_uevent(struct device *dev, struct kobj_uevent_env *env)
184{
185 struct rpmsg_channel *rpdev = to_rpmsg_channel(dev);
186
187 return add_uevent_var(env, "MODALIAS=" RPMSG_DEVICE_MODALIAS_FMT,
188 rpdev->id.name);
189}
190
Ohad Ben-Cohen5a081ca2012-06-06 10:09:25 +0300191/**
192 * __ept_release() - deallocate an rpmsg endpoint
193 * @kref: the ept's reference count
194 *
195 * This function deallocates an ept, and is invoked when its @kref refcount
196 * drops to zero.
197 *
198 * Never invoke this function directly!
199 */
200static void __ept_release(struct kref *kref)
201{
202 struct rpmsg_endpoint *ept = container_of(kref, struct rpmsg_endpoint,
203 refcount);
204 /*
205 * At this point no one holds a reference to ept anymore,
206 * so we can directly free it
207 */
208 kfree(ept);
209}
210
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200211/* for more info, see below documentation of rpmsg_create_ept() */
212static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp,
213 struct rpmsg_channel *rpdev, rpmsg_rx_cb_t cb,
214 void *priv, u32 addr)
215{
216 int err, tmpaddr, request;
217 struct rpmsg_endpoint *ept;
218 struct device *dev = rpdev ? &rpdev->dev : &vrp->vdev->dev;
219
220 if (!idr_pre_get(&vrp->endpoints, GFP_KERNEL))
221 return NULL;
222
223 ept = kzalloc(sizeof(*ept), GFP_KERNEL);
224 if (!ept) {
225 dev_err(dev, "failed to kzalloc a new ept\n");
226 return NULL;
227 }
228
Ohad Ben-Cohen5a081ca2012-06-06 10:09:25 +0300229 kref_init(&ept->refcount);
Ohad Ben-Cohen15fd9432012-06-07 15:39:35 +0300230 mutex_init(&ept->cb_lock);
Ohad Ben-Cohen5a081ca2012-06-06 10:09:25 +0300231
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200232 ept->rpdev = rpdev;
233 ept->cb = cb;
234 ept->priv = priv;
235
236 /* do we need to allocate a local address ? */
237 request = addr == RPMSG_ADDR_ANY ? RPMSG_RESERVED_ADDRESSES : addr;
238
239 mutex_lock(&vrp->endpoints_lock);
240
241 /* bind the endpoint to an rpmsg address (and allocate one if needed) */
242 err = idr_get_new_above(&vrp->endpoints, ept, request, &tmpaddr);
243 if (err) {
244 dev_err(dev, "idr_get_new_above failed: %d\n", err);
245 goto free_ept;
246 }
247
248 /* make sure the user's address request is fulfilled, if relevant */
249 if (addr != RPMSG_ADDR_ANY && tmpaddr != addr) {
250 dev_err(dev, "address 0x%x already in use\n", addr);
251 goto rem_idr;
252 }
253
254 ept->addr = tmpaddr;
255
256 mutex_unlock(&vrp->endpoints_lock);
257
258 return ept;
259
260rem_idr:
261 idr_remove(&vrp->endpoints, request);
262free_ept:
263 mutex_unlock(&vrp->endpoints_lock);
Ohad Ben-Cohen5a081ca2012-06-06 10:09:25 +0300264 kref_put(&ept->refcount, __ept_release);
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200265 return NULL;
266}
267
268/**
269 * rpmsg_create_ept() - create a new rpmsg_endpoint
270 * @rpdev: rpmsg channel device
271 * @cb: rx callback handler
272 * @priv: private data for the driver's use
273 * @addr: local rpmsg address to bind with @cb
274 *
275 * Every rpmsg address in the system is bound to an rx callback (so when
276 * inbound messages arrive, they are dispatched by the rpmsg bus using the
277 * appropriate callback handler) by means of an rpmsg_endpoint struct.
278 *
279 * This function allows drivers to create such an endpoint, and by that,
280 * bind a callback, and possibly some private data too, to an rpmsg address
281 * (either one that is known in advance, or one that will be dynamically
282 * assigned for them).
283 *
284 * Simple rpmsg drivers need not call rpmsg_create_ept, because an endpoint
285 * is already created for them when they are probed by the rpmsg bus
286 * (using the rx callback provided when they registered to the rpmsg bus).
287 *
288 * So things should just work for simple drivers: they already have an
289 * endpoint, their rx callback is bound to their rpmsg address, and when
290 * relevant inbound messages arrive (i.e. messages which their dst address
291 * equals to the src address of their rpmsg channel), the driver's handler
292 * is invoked to process it.
293 *
294 * That said, more complicated drivers might do need to allocate
295 * additional rpmsg addresses, and bind them to different rx callbacks.
296 * To accomplish that, those drivers need to call this function.
297 *
298 * Drivers should provide their @rpdev channel (so the new endpoint would belong
299 * to the same remote processor their channel belongs to), an rx callback
300 * function, an optional private data (which is provided back when the
301 * rx callback is invoked), and an address they want to bind with the
302 * callback. If @addr is RPMSG_ADDR_ANY, then rpmsg_create_ept will
303 * dynamically assign them an available rpmsg address (drivers should have
304 * a very good reason why not to always use RPMSG_ADDR_ANY here).
305 *
306 * Returns a pointer to the endpoint on success, or NULL on error.
307 */
308struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_channel *rpdev,
309 rpmsg_rx_cb_t cb, void *priv, u32 addr)
310{
311 return __rpmsg_create_ept(rpdev->vrp, rpdev, cb, priv, addr);
312}
313EXPORT_SYMBOL(rpmsg_create_ept);
314
315/**
Ohad Ben-Cohenfa2d7792012-02-09 15:16:41 +0200316 * __rpmsg_destroy_ept() - destroy an existing rpmsg endpoint
317 * @vrp: virtproc which owns this ept
318 * @ept: endpoing to destroy
319 *
320 * An internal function which destroy an ept without assuming it is
321 * bound to an rpmsg channel. This is needed for handling the internal
322 * name service endpoint, which isn't bound to an rpmsg channel.
323 * See also __rpmsg_create_ept().
324 */
325static void
326__rpmsg_destroy_ept(struct virtproc_info *vrp, struct rpmsg_endpoint *ept)
327{
Ohad Ben-Cohen15fd9432012-06-07 15:39:35 +0300328 /* make sure new inbound messages can't find this ept anymore */
Ohad Ben-Cohenfa2d7792012-02-09 15:16:41 +0200329 mutex_lock(&vrp->endpoints_lock);
330 idr_remove(&vrp->endpoints, ept->addr);
331 mutex_unlock(&vrp->endpoints_lock);
332
Ohad Ben-Cohen15fd9432012-06-07 15:39:35 +0300333 /* make sure in-flight inbound messages won't invoke cb anymore */
334 mutex_lock(&ept->cb_lock);
335 ept->cb = NULL;
336 mutex_unlock(&ept->cb_lock);
337
Ohad Ben-Cohen5a081ca2012-06-06 10:09:25 +0300338 kref_put(&ept->refcount, __ept_release);
Ohad Ben-Cohenfa2d7792012-02-09 15:16:41 +0200339}
340
341/**
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200342 * rpmsg_destroy_ept() - destroy an existing rpmsg endpoint
343 * @ept: endpoing to destroy
344 *
345 * Should be used by drivers to destroy an rpmsg endpoint previously
346 * created with rpmsg_create_ept().
347 */
348void rpmsg_destroy_ept(struct rpmsg_endpoint *ept)
349{
Ohad Ben-Cohenfa2d7792012-02-09 15:16:41 +0200350 __rpmsg_destroy_ept(ept->rpdev->vrp, ept);
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200351}
352EXPORT_SYMBOL(rpmsg_destroy_ept);
353
354/*
355 * when an rpmsg driver is probed with a channel, we seamlessly create
356 * it an endpoint, binding its rx callback to a unique local rpmsg
357 * address.
358 *
359 * if we need to, we also announce about this channel to the remote
360 * processor (needed in case the driver is exposing an rpmsg service).
361 */
362static int rpmsg_dev_probe(struct device *dev)
363{
364 struct rpmsg_channel *rpdev = to_rpmsg_channel(dev);
365 struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
366 struct virtproc_info *vrp = rpdev->vrp;
367 struct rpmsg_endpoint *ept;
368 int err;
369
370 ept = rpmsg_create_ept(rpdev, rpdrv->callback, NULL, rpdev->src);
371 if (!ept) {
372 dev_err(dev, "failed to create endpoint\n");
373 err = -ENOMEM;
374 goto out;
375 }
376
377 rpdev->ept = ept;
378 rpdev->src = ept->addr;
379
380 err = rpdrv->probe(rpdev);
381 if (err) {
382 dev_err(dev, "%s: failed: %d\n", __func__, err);
383 rpmsg_destroy_ept(ept);
384 goto out;
385 }
386
387 /* need to tell remote processor's name service about this channel ? */
388 if (rpdev->announce &&
389 virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) {
390 struct rpmsg_ns_msg nsm;
391
392 strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
393 nsm.addr = rpdev->src;
394 nsm.flags = RPMSG_NS_CREATE;
395
396 err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
397 if (err)
398 dev_err(dev, "failed to announce service %d\n", err);
399 }
400
401out:
402 return err;
403}
404
405static int rpmsg_dev_remove(struct device *dev)
406{
407 struct rpmsg_channel *rpdev = to_rpmsg_channel(dev);
408 struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
409 struct virtproc_info *vrp = rpdev->vrp;
410 int err = 0;
411
412 /* tell remote processor's name service we're removing this channel */
413 if (rpdev->announce &&
414 virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) {
415 struct rpmsg_ns_msg nsm;
416
417 strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
418 nsm.addr = rpdev->src;
419 nsm.flags = RPMSG_NS_DESTROY;
420
421 err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
422 if (err)
423 dev_err(dev, "failed to announce service %d\n", err);
424 }
425
426 rpdrv->remove(rpdev);
427
428 rpmsg_destroy_ept(rpdev->ept);
429
430 return err;
431}
432
433static struct bus_type rpmsg_bus = {
434 .name = "rpmsg",
435 .match = rpmsg_dev_match,
436 .dev_attrs = rpmsg_dev_attrs,
437 .uevent = rpmsg_uevent,
438 .probe = rpmsg_dev_probe,
439 .remove = rpmsg_dev_remove,
440};
441
442/**
443 * register_rpmsg_driver() - register an rpmsg driver with the rpmsg bus
444 * @rpdrv: pointer to a struct rpmsg_driver
445 *
446 * Returns 0 on success, and an appropriate error value on failure.
447 */
448int register_rpmsg_driver(struct rpmsg_driver *rpdrv)
449{
450 rpdrv->drv.bus = &rpmsg_bus;
451 return driver_register(&rpdrv->drv);
452}
453EXPORT_SYMBOL(register_rpmsg_driver);
454
455/**
456 * unregister_rpmsg_driver() - unregister an rpmsg driver from the rpmsg bus
457 * @rpdrv: pointer to a struct rpmsg_driver
458 *
459 * Returns 0 on success, and an appropriate error value on failure.
460 */
461void unregister_rpmsg_driver(struct rpmsg_driver *rpdrv)
462{
463 driver_unregister(&rpdrv->drv);
464}
465EXPORT_SYMBOL(unregister_rpmsg_driver);
466
467static void rpmsg_release_device(struct device *dev)
468{
469 struct rpmsg_channel *rpdev = to_rpmsg_channel(dev);
470
471 kfree(rpdev);
472}
473
474/*
475 * match an rpmsg channel with a channel info struct.
476 * this is used to make sure we're not creating rpmsg devices for channels
477 * that already exist.
478 */
479static int rpmsg_channel_match(struct device *dev, void *data)
480{
481 struct rpmsg_channel_info *chinfo = data;
482 struct rpmsg_channel *rpdev = to_rpmsg_channel(dev);
483
484 if (chinfo->src != RPMSG_ADDR_ANY && chinfo->src != rpdev->src)
485 return 0;
486
487 if (chinfo->dst != RPMSG_ADDR_ANY && chinfo->dst != rpdev->dst)
488 return 0;
489
490 if (strncmp(chinfo->name, rpdev->id.name, RPMSG_NAME_SIZE))
491 return 0;
492
493 /* found a match ! */
494 return 1;
495}
496
497/*
498 * create an rpmsg channel using its name and address info.
499 * this function will be used to create both static and dynamic
500 * channels.
501 */
502static struct rpmsg_channel *rpmsg_create_channel(struct virtproc_info *vrp,
503 struct rpmsg_channel_info *chinfo)
504{
505 struct rpmsg_channel *rpdev;
506 struct device *tmp, *dev = &vrp->vdev->dev;
507 int ret;
508
509 /* make sure a similar channel doesn't already exist */
510 tmp = device_find_child(dev, chinfo, rpmsg_channel_match);
511 if (tmp) {
512 /* decrement the matched device's refcount back */
513 put_device(tmp);
514 dev_err(dev, "channel %s:%x:%x already exist\n",
515 chinfo->name, chinfo->src, chinfo->dst);
516 return NULL;
517 }
518
519 rpdev = kzalloc(sizeof(struct rpmsg_channel), GFP_KERNEL);
520 if (!rpdev) {
521 pr_err("kzalloc failed\n");
522 return NULL;
523 }
524
525 rpdev->vrp = vrp;
526 rpdev->src = chinfo->src;
527 rpdev->dst = chinfo->dst;
528
529 /*
530 * rpmsg server channels has predefined local address (for now),
531 * and their existence needs to be announced remotely
532 */
533 rpdev->announce = rpdev->src != RPMSG_ADDR_ANY ? true : false;
534
535 strncpy(rpdev->id.name, chinfo->name, RPMSG_NAME_SIZE);
536
537 /* very simple device indexing plumbing which is enough for now */
538 dev_set_name(&rpdev->dev, "rpmsg%d", rpmsg_dev_index++);
539
540 rpdev->dev.parent = &vrp->vdev->dev;
541 rpdev->dev.bus = &rpmsg_bus;
542 rpdev->dev.release = rpmsg_release_device;
543
544 ret = device_register(&rpdev->dev);
545 if (ret) {
546 dev_err(dev, "device_register failed: %d\n", ret);
547 put_device(&rpdev->dev);
548 return NULL;
549 }
550
551 return rpdev;
552}
553
554/*
555 * find an existing channel using its name + address properties,
556 * and destroy it
557 */
558static int rpmsg_destroy_channel(struct virtproc_info *vrp,
559 struct rpmsg_channel_info *chinfo)
560{
561 struct virtio_device *vdev = vrp->vdev;
562 struct device *dev;
563
564 dev = device_find_child(&vdev->dev, chinfo, rpmsg_channel_match);
565 if (!dev)
566 return -EINVAL;
567
568 device_unregister(dev);
569
570 put_device(dev);
571
572 return 0;
573}
574
575/* super simple buffer "allocator" that is just enough for now */
576static void *get_a_tx_buf(struct virtproc_info *vrp)
577{
578 unsigned int len;
579 void *ret;
580
581 /* support multiple concurrent senders */
582 mutex_lock(&vrp->tx_lock);
583
584 /*
585 * either pick the next unused tx buffer
586 * (half of our buffers are used for sending messages)
587 */
588 if (vrp->last_sbuf < RPMSG_NUM_BUFS / 2)
589 ret = vrp->sbufs + RPMSG_BUF_SIZE * vrp->last_sbuf++;
590 /* or recycle a used one */
591 else
592 ret = virtqueue_get_buf(vrp->svq, &len);
593
594 mutex_unlock(&vrp->tx_lock);
595
596 return ret;
597}
598
599/**
600 * rpmsg_upref_sleepers() - enable "tx-complete" interrupts, if needed
601 * @vrp: virtual remote processor state
602 *
603 * This function is called before a sender is blocked, waiting for
604 * a tx buffer to become available.
605 *
606 * If we already have blocking senders, this function merely increases
607 * the "sleepers" reference count, and exits.
608 *
609 * Otherwise, if this is the first sender to block, we also enable
610 * virtio's tx callbacks, so we'd be immediately notified when a tx
611 * buffer is consumed (we rely on virtio's tx callback in order
612 * to wake up sleeping senders as soon as a tx buffer is used by the
613 * remote processor).
614 */
615static void rpmsg_upref_sleepers(struct virtproc_info *vrp)
616{
617 /* support multiple concurrent senders */
618 mutex_lock(&vrp->tx_lock);
619
620 /* are we the first sleeping context waiting for tx buffers ? */
621 if (atomic_inc_return(&vrp->sleepers) == 1)
622 /* enable "tx-complete" interrupts before dozing off */
623 virtqueue_enable_cb(vrp->svq);
624
625 mutex_unlock(&vrp->tx_lock);
626}
627
628/**
629 * rpmsg_downref_sleepers() - disable "tx-complete" interrupts, if needed
630 * @vrp: virtual remote processor state
631 *
632 * This function is called after a sender, that waited for a tx buffer
633 * to become available, is unblocked.
634 *
635 * If we still have blocking senders, this function merely decreases
636 * the "sleepers" reference count, and exits.
637 *
638 * Otherwise, if there are no more blocking senders, we also disable
639 * virtio's tx callbacks, to avoid the overhead incurred with handling
640 * those (now redundant) interrupts.
641 */
642static void rpmsg_downref_sleepers(struct virtproc_info *vrp)
643{
644 /* support multiple concurrent senders */
645 mutex_lock(&vrp->tx_lock);
646
647 /* are we the last sleeping context waiting for tx buffers ? */
648 if (atomic_dec_and_test(&vrp->sleepers))
649 /* disable "tx-complete" interrupts */
650 virtqueue_disable_cb(vrp->svq);
651
652 mutex_unlock(&vrp->tx_lock);
653}
654
655/**
656 * rpmsg_send_offchannel_raw() - send a message across to the remote processor
657 * @rpdev: the rpmsg channel
658 * @src: source address
659 * @dst: destination address
660 * @data: payload of message
661 * @len: length of payload
662 * @wait: indicates whether caller should block in case no TX buffers available
663 *
664 * This function is the base implementation for all of the rpmsg sending API.
665 *
666 * It will send @data of length @len to @dst, and say it's from @src. The
667 * message will be sent to the remote processor which the @rpdev channel
668 * belongs to.
669 *
670 * The message is sent using one of the TX buffers that are available for
671 * communication with this remote processor.
672 *
673 * If @wait is true, the caller will be blocked until either a TX buffer is
674 * available, or 15 seconds elapses (we don't want callers to
675 * sleep indefinitely due to misbehaving remote processors), and in that
676 * case -ERESTARTSYS is returned. The number '15' itself was picked
677 * arbitrarily; there's little point in asking drivers to provide a timeout
678 * value themselves.
679 *
680 * Otherwise, if @wait is false, and there are no TX buffers available,
681 * the function will immediately fail, and -ENOMEM will be returned.
682 *
683 * Normally drivers shouldn't use this function directly; instead, drivers
684 * should use the appropriate rpmsg_{try}send{to, _offchannel} API
685 * (see include/linux/rpmsg.h).
686 *
687 * Returns 0 on success and an appropriate error value on failure.
688 */
689int rpmsg_send_offchannel_raw(struct rpmsg_channel *rpdev, u32 src, u32 dst,
690 void *data, int len, bool wait)
691{
692 struct virtproc_info *vrp = rpdev->vrp;
693 struct device *dev = &rpdev->dev;
694 struct scatterlist sg;
695 struct rpmsg_hdr *msg;
696 int err;
697
698 /* bcasting isn't allowed */
699 if (src == RPMSG_ADDR_ANY || dst == RPMSG_ADDR_ANY) {
700 dev_err(dev, "invalid addr (src 0x%x, dst 0x%x)\n", src, dst);
701 return -EINVAL;
702 }
703
704 /*
705 * We currently use fixed-sized buffers, and therefore the payload
706 * length is limited.
707 *
708 * One of the possible improvements here is either to support
709 * user-provided buffers (and then we can also support zero-copy
710 * messaging), or to improve the buffer allocator, to support
711 * variable-length buffer sizes.
712 */
713 if (len > RPMSG_BUF_SIZE - sizeof(struct rpmsg_hdr)) {
714 dev_err(dev, "message is too big (%d)\n", len);
715 return -EMSGSIZE;
716 }
717
718 /* grab a buffer */
719 msg = get_a_tx_buf(vrp);
720 if (!msg && !wait)
721 return -ENOMEM;
722
723 /* no free buffer ? wait for one (but bail after 15 seconds) */
724 while (!msg) {
725 /* enable "tx-complete" interrupts, if not already enabled */
726 rpmsg_upref_sleepers(vrp);
727
728 /*
729 * sleep until a free buffer is available or 15 secs elapse.
730 * the timeout period is not configurable because there's
731 * little point in asking drivers to specify that.
732 * if later this happens to be required, it'd be easy to add.
733 */
734 err = wait_event_interruptible_timeout(vrp->sendq,
735 (msg = get_a_tx_buf(vrp)),
736 msecs_to_jiffies(15000));
737
738 /* disable "tx-complete" interrupts if we're the last sleeper */
739 rpmsg_downref_sleepers(vrp);
740
741 /* timeout ? */
742 if (!err) {
743 dev_err(dev, "timeout waiting for a tx buffer\n");
744 return -ERESTARTSYS;
745 }
746 }
747
748 msg->len = len;
749 msg->flags = 0;
750 msg->src = src;
751 msg->dst = dst;
752 msg->reserved = 0;
753 memcpy(msg->data, data, len);
754
755 dev_dbg(dev, "TX From 0x%x, To 0x%x, Len %d, Flags %d, Reserved %d\n",
756 msg->src, msg->dst, msg->len,
757 msg->flags, msg->reserved);
758 print_hex_dump(KERN_DEBUG, "rpmsg_virtio TX: ", DUMP_PREFIX_NONE, 16, 1,
759 msg, sizeof(*msg) + msg->len, true);
760
761 sg_init_one(&sg, msg, sizeof(*msg) + len);
762
763 mutex_lock(&vrp->tx_lock);
764
765 /* add message to the remote processor's virtqueue */
Axel Linb7195872012-01-12 09:00:27 +0200766 err = virtqueue_add_buf(vrp->svq, &sg, 1, 0, msg, GFP_KERNEL);
Rusty Russell57e1a372012-10-16 23:56:15 +1030767 if (err) {
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200768 /*
769 * need to reclaim the buffer here, otherwise it's lost
770 * (memory won't leak, but rpmsg won't use it again for TX).
771 * this will wait for a buffer management overhaul.
772 */
Axel Linb7195872012-01-12 09:00:27 +0200773 dev_err(dev, "virtqueue_add_buf failed: %d\n", err);
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200774 goto out;
775 }
776
777 /* tell the remote processor it has a pending message to read */
778 virtqueue_kick(vrp->svq);
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200779out:
780 mutex_unlock(&vrp->tx_lock);
781 return err;
782}
783EXPORT_SYMBOL(rpmsg_send_offchannel_raw);
784
785/* called when an rx buffer is used, and it's time to digest a message */
786static void rpmsg_recv_done(struct virtqueue *rvq)
787{
788 struct rpmsg_hdr *msg;
789 unsigned int len;
790 struct rpmsg_endpoint *ept;
791 struct scatterlist sg;
792 struct virtproc_info *vrp = rvq->vdev->priv;
793 struct device *dev = &rvq->vdev->dev;
794 int err;
795
796 msg = virtqueue_get_buf(rvq, &len);
797 if (!msg) {
798 dev_err(dev, "uhm, incoming signal, but no used buffer ?\n");
799 return;
800 }
801
802 dev_dbg(dev, "From: 0x%x, To: 0x%x, Len: %d, Flags: %d, Reserved: %d\n",
803 msg->src, msg->dst, msg->len,
804 msg->flags, msg->reserved);
805 print_hex_dump(KERN_DEBUG, "rpmsg_virtio RX: ", DUMP_PREFIX_NONE, 16, 1,
806 msg, sizeof(*msg) + msg->len, true);
807
Ohad Ben-Cohen96482242012-02-28 16:16:48 +0200808 /*
809 * We currently use fixed-sized buffers, so trivially sanitize
810 * the reported payload length.
811 */
812 if (len > RPMSG_BUF_SIZE ||
813 msg->len > (len - sizeof(struct rpmsg_hdr))) {
814 dev_warn(dev, "inbound msg too big: (%d, %d)\n", len, msg->len);
815 return;
816 }
817
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200818 /* use the dst addr to fetch the callback of the appropriate user */
819 mutex_lock(&vrp->endpoints_lock);
Ohad Ben-Cohen5a081ca2012-06-06 10:09:25 +0300820
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200821 ept = idr_find(&vrp->endpoints, msg->dst);
Ohad Ben-Cohen5a081ca2012-06-06 10:09:25 +0300822
823 /* let's make sure no one deallocates ept while we use it */
824 if (ept)
825 kref_get(&ept->refcount);
826
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200827 mutex_unlock(&vrp->endpoints_lock);
828
Ohad Ben-Cohen15fd9432012-06-07 15:39:35 +0300829 if (ept) {
830 /* make sure ept->cb doesn't go away while we use it */
831 mutex_lock(&ept->cb_lock);
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200832
Ohad Ben-Cohen15fd9432012-06-07 15:39:35 +0300833 if (ept->cb)
834 ept->cb(ept->rpdev, msg->data, msg->len, ept->priv,
835 msg->src);
836
837 mutex_unlock(&ept->cb_lock);
838
839 /* farewell, ept, we don't need you anymore */
Ohad Ben-Cohen5a081ca2012-06-06 10:09:25 +0300840 kref_put(&ept->refcount, __ept_release);
Ohad Ben-Cohen15fd9432012-06-07 15:39:35 +0300841 } else
842 dev_warn(dev, "msg received with no recepient\n");
Ohad Ben-Cohen5a081ca2012-06-06 10:09:25 +0300843
Ohad Ben-Cohenf1d9e9c2012-02-28 16:11:28 +0200844 /* publish the real size of the buffer */
845 sg_init_one(&sg, msg, RPMSG_BUF_SIZE);
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200846
847 /* add the buffer back to the remote processor's virtqueue */
Axel Linb7195872012-01-12 09:00:27 +0200848 err = virtqueue_add_buf(vrp->rvq, &sg, 0, 1, msg, GFP_KERNEL);
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200849 if (err < 0) {
850 dev_err(dev, "failed to add a virtqueue buffer: %d\n", err);
851 return;
852 }
853
854 /* tell the remote processor we added another available rx buffer */
855 virtqueue_kick(vrp->rvq);
856}
857
858/*
859 * This is invoked whenever the remote processor completed processing
860 * a TX msg we just sent it, and the buffer is put back to the used ring.
861 *
862 * Normally, though, we suppress this "tx complete" interrupt in order to
863 * avoid the incurred overhead.
864 */
865static void rpmsg_xmit_done(struct virtqueue *svq)
866{
867 struct virtproc_info *vrp = svq->vdev->priv;
868
869 dev_dbg(&svq->vdev->dev, "%s\n", __func__);
870
871 /* wake up potential senders that are waiting for a tx buffer */
872 wake_up_interruptible(&vrp->sendq);
873}
874
875/* invoked when a name service announcement arrives */
876static void rpmsg_ns_cb(struct rpmsg_channel *rpdev, void *data, int len,
877 void *priv, u32 src)
878{
879 struct rpmsg_ns_msg *msg = data;
880 struct rpmsg_channel *newch;
881 struct rpmsg_channel_info chinfo;
882 struct virtproc_info *vrp = priv;
883 struct device *dev = &vrp->vdev->dev;
884 int ret;
885
886 print_hex_dump(KERN_DEBUG, "NS announcement: ",
887 DUMP_PREFIX_NONE, 16, 1,
888 data, len, true);
889
890 if (len != sizeof(*msg)) {
891 dev_err(dev, "malformed ns msg (%d)\n", len);
892 return;
893 }
894
895 /*
896 * the name service ept does _not_ belong to a real rpmsg channel,
897 * and is handled by the rpmsg bus itself.
898 * for sanity reasons, make sure a valid rpdev has _not_ sneaked
899 * in somehow.
900 */
901 if (rpdev) {
902 dev_err(dev, "anomaly: ns ept has an rpdev handle\n");
903 return;
904 }
905
906 /* don't trust the remote processor for null terminating the name */
907 msg->name[RPMSG_NAME_SIZE - 1] = '\0';
908
909 dev_info(dev, "%sing channel %s addr 0x%x\n",
910 msg->flags & RPMSG_NS_DESTROY ? "destroy" : "creat",
911 msg->name, msg->addr);
912
913 strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
914 chinfo.src = RPMSG_ADDR_ANY;
915 chinfo.dst = msg->addr;
916
917 if (msg->flags & RPMSG_NS_DESTROY) {
918 ret = rpmsg_destroy_channel(vrp, &chinfo);
919 if (ret)
920 dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
921 } else {
922 newch = rpmsg_create_channel(vrp, &chinfo);
923 if (!newch)
924 dev_err(dev, "rpmsg_create_channel failed\n");
925 }
926}
927
928static int rpmsg_probe(struct virtio_device *vdev)
929{
930 vq_callback_t *vq_cbs[] = { rpmsg_recv_done, rpmsg_xmit_done };
931 const char *names[] = { "input", "output" };
932 struct virtqueue *vqs[2];
933 struct virtproc_info *vrp;
934 void *bufs_va;
935 int err = 0, i;
936
937 vrp = kzalloc(sizeof(*vrp), GFP_KERNEL);
938 if (!vrp)
939 return -ENOMEM;
940
941 vrp->vdev = vdev;
942
943 idr_init(&vrp->endpoints);
944 mutex_init(&vrp->endpoints_lock);
945 mutex_init(&vrp->tx_lock);
946 init_waitqueue_head(&vrp->sendq);
947
948 /* We expect two virtqueues, rx and tx (and in this order) */
949 err = vdev->config->find_vqs(vdev, 2, vqs, vq_cbs, names);
950 if (err)
951 goto free_vrp;
952
953 vrp->rvq = vqs[0];
954 vrp->svq = vqs[1];
955
956 /* allocate coherent memory for the buffers */
Ohad Ben-Cohenb5ab5e22012-05-30 22:01:25 +0300957 bufs_va = dma_alloc_coherent(vdev->dev.parent->parent,
958 RPMSG_TOTAL_BUF_SPACE,
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200959 &vrp->bufs_dma, GFP_KERNEL);
960 if (!bufs_va)
961 goto vqs_del;
962
Mark Asselstine9d8ae5c2012-03-04 13:33:28 +0200963 dev_dbg(&vdev->dev, "buffers: va %p, dma 0x%llx\n", bufs_va,
964 (unsigned long long)vrp->bufs_dma);
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200965
966 /* half of the buffers is dedicated for RX */
967 vrp->rbufs = bufs_va;
968
969 /* and half is dedicated for TX */
970 vrp->sbufs = bufs_va + RPMSG_TOTAL_BUF_SPACE / 2;
971
972 /* set up the receive buffers */
973 for (i = 0; i < RPMSG_NUM_BUFS / 2; i++) {
974 struct scatterlist sg;
975 void *cpu_addr = vrp->rbufs + i * RPMSG_BUF_SIZE;
976
977 sg_init_one(&sg, cpu_addr, RPMSG_BUF_SIZE);
978
Axel Linb7195872012-01-12 09:00:27 +0200979 err = virtqueue_add_buf(vrp->rvq, &sg, 0, 1, cpu_addr,
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200980 GFP_KERNEL);
Rusty Russell57e1a372012-10-16 23:56:15 +1030981 WARN_ON(err); /* sanity check; this can't really happen */
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +0200982 }
983
984 /* suppress "tx-complete" interrupts */
985 virtqueue_disable_cb(vrp->svq);
986
987 vdev->priv = vrp;
988
989 /* if supported by the remote processor, enable the name service */
990 if (virtio_has_feature(vdev, VIRTIO_RPMSG_F_NS)) {
991 /* a dedicated endpoint handles the name service msgs */
992 vrp->ns_ept = __rpmsg_create_ept(vrp, NULL, rpmsg_ns_cb,
993 vrp, RPMSG_NS_ADDR);
994 if (!vrp->ns_ept) {
995 dev_err(&vdev->dev, "failed to create the ns ept\n");
996 err = -ENOMEM;
997 goto free_coherent;
998 }
999 }
1000
1001 /* tell the remote processor it can start sending messages */
1002 virtqueue_kick(vrp->rvq);
1003
1004 dev_info(&vdev->dev, "rpmsg host is online\n");
1005
1006 return 0;
1007
1008free_coherent:
Fernando Guzman Lugoeeb00742012-08-29 19:24:52 -05001009 dma_free_coherent(vdev->dev.parent->parent, RPMSG_TOTAL_BUF_SPACE,
1010 bufs_va, vrp->bufs_dma);
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +02001011vqs_del:
1012 vdev->config->del_vqs(vrp->vdev);
1013free_vrp:
1014 kfree(vrp);
1015 return err;
1016}
1017
1018static int rpmsg_remove_device(struct device *dev, void *data)
1019{
1020 device_unregister(dev);
1021
1022 return 0;
1023}
1024
1025static void __devexit rpmsg_remove(struct virtio_device *vdev)
1026{
1027 struct virtproc_info *vrp = vdev->priv;
1028 int ret;
1029
1030 vdev->config->reset(vdev);
1031
1032 ret = device_for_each_child(&vdev->dev, NULL, rpmsg_remove_device);
1033 if (ret)
1034 dev_warn(&vdev->dev, "can't remove rpmsg device: %d\n", ret);
1035
Ohad Ben-Cohenfa2d7792012-02-09 15:16:41 +02001036 if (vrp->ns_ept)
1037 __rpmsg_destroy_ept(vrp, vrp->ns_ept);
1038
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +02001039 idr_remove_all(&vrp->endpoints);
1040 idr_destroy(&vrp->endpoints);
1041
1042 vdev->config->del_vqs(vrp->vdev);
1043
Fernando Guzman Lugoeeb00742012-08-29 19:24:52 -05001044 dma_free_coherent(vdev->dev.parent->parent, RPMSG_TOTAL_BUF_SPACE,
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +02001045 vrp->rbufs, vrp->bufs_dma);
1046
1047 kfree(vrp);
1048}
1049
1050static struct virtio_device_id id_table[] = {
1051 { VIRTIO_ID_RPMSG, VIRTIO_DEV_ANY_ID },
1052 { 0 },
1053};
1054
1055static unsigned int features[] = {
1056 VIRTIO_RPMSG_F_NS,
1057};
1058
1059static struct virtio_driver virtio_ipc_driver = {
1060 .feature_table = features,
1061 .feature_table_size = ARRAY_SIZE(features),
1062 .driver.name = KBUILD_MODNAME,
1063 .driver.owner = THIS_MODULE,
1064 .id_table = id_table,
1065 .probe = rpmsg_probe,
1066 .remove = __devexit_p(rpmsg_remove),
1067};
1068
1069static int __init rpmsg_init(void)
1070{
1071 int ret;
1072
1073 ret = bus_register(&rpmsg_bus);
1074 if (ret) {
1075 pr_err("failed to register rpmsg bus: %d\n", ret);
1076 return ret;
1077 }
1078
1079 ret = register_virtio_driver(&virtio_ipc_driver);
1080 if (ret) {
1081 pr_err("failed to register virtio driver: %d\n", ret);
1082 bus_unregister(&rpmsg_bus);
1083 }
1084
1085 return ret;
1086}
Federico Fuga96342522012-07-16 10:36:51 +03001087subsys_initcall(rpmsg_init);
Ohad Ben-Cohenbcabbcc2011-10-20 21:10:55 +02001088
1089static void __exit rpmsg_fini(void)
1090{
1091 unregister_virtio_driver(&virtio_ipc_driver);
1092 bus_unregister(&rpmsg_bus);
1093}
1094module_exit(rpmsg_fini);
1095
1096MODULE_DEVICE_TABLE(virtio, id_table);
1097MODULE_DESCRIPTION("Virtio-based remote processor messaging bus");
1098MODULE_LICENSE("GPL v2");