| Kay Sievers | fbc92a3 | 2010-12-01 18:51:05 +0100 | [diff] [blame] | 1 | What: /sys/class/tty/console/active |
| 2 | Date: Nov 2010 |
| 3 | Contact: Kay Sievers <kay.sievers@vrfy.org> |
| 4 | Description: |
| 5 | Shows the list of currently configured |
| 6 | console devices, like 'tty1 ttyS0'. |
| 7 | The last entry in the file is the active |
| 8 | device connected to /dev/console. |
| 9 | The file supports poll() to detect virtual |
| 10 | console switches. |
| 11 | |
| 12 | What: /sys/class/tty/tty0/active |
| 13 | Date: Nov 2010 |
| 14 | Contact: Kay Sievers <kay.sievers@vrfy.org> |
| 15 | Description: |
| 16 | Shows the currently active virtual console |
| 17 | device, like 'tty1'. |
| 18 | The file supports poll() to detect virtual |
| 19 | console switches. |
| Tomas Hlavacek | 6915c0e | 2012-09-06 03:17:18 +0200 | [diff] [blame] | 20 | |
| 21 | What: /sys/class/tty/ttyS0/uartclk |
| 22 | Date: Sep 2012 |
| 23 | Contact: Tomas Hlavacek <tmshlvck@gmail.com> |
| 24 | Description: |
| 25 | Shows the current uartclk value associated with the |
| 26 | UART port in serial_core, that is bound to TTY like ttyS0. |
| 27 | uartclk = 16 * baud_base |
| 28 | |
| Alan Cox | 373bac4 | 2012-10-29 15:20:40 +0000 | [diff] [blame] | 29 | These sysfs values expose the TIOCGSERIAL interface via |
| 30 | sysfs rather than via ioctls. |
| 31 | |
| 32 | What: /sys/class/tty/ttyS0/type |
| 33 | Date: October 2012 |
| 34 | Contact: Alan Cox <alan@linux.intel.com> |
| 35 | Description: |
| 36 | Shows the current tty type for this port. |
| 37 | |
| 38 | These sysfs values expose the TIOCGSERIAL interface via |
| 39 | sysfs rather than via ioctls. |
| 40 | |
| 41 | What: /sys/class/tty/ttyS0/line |
| 42 | Date: October 2012 |
| 43 | Contact: Alan Cox <alan@linux.intel.com> |
| 44 | Description: |
| 45 | Shows the current tty line number for this port. |
| 46 | |
| 47 | These sysfs values expose the TIOCGSERIAL interface via |
| 48 | sysfs rather than via ioctls. |
| 49 | |
| 50 | What: /sys/class/tty/ttyS0/port |
| 51 | Date: October 2012 |
| 52 | Contact: Alan Cox <alan@linux.intel.com> |
| 53 | Description: |
| 54 | Shows the current tty port I/O address for this port. |
| 55 | |
| 56 | These sysfs values expose the TIOCGSERIAL interface via |
| 57 | sysfs rather than via ioctls. |
| 58 | |
| 59 | What: /sys/class/tty/ttyS0/irq |
| 60 | Date: October 2012 |
| 61 | Contact: Alan Cox <alan@linux.intel.com> |
| 62 | Description: |
| 63 | Shows the current primary interrupt for this port. |
| 64 | |
| 65 | These sysfs values expose the TIOCGSERIAL interface via |
| 66 | sysfs rather than via ioctls. |
| 67 | |
| 68 | What: /sys/class/tty/ttyS0/flags |
| 69 | Date: October 2012 |
| 70 | Contact: Alan Cox <alan@linux.intel.com> |
| 71 | Description: |
| 72 | Show the tty port status flags for this port. |
| 73 | |
| 74 | These sysfs values expose the TIOCGSERIAL interface via |
| 75 | sysfs rather than via ioctls. |
| 76 | |
| 77 | What: /sys/class/tty/ttyS0/xmit_fifo_size |
| 78 | Date: October 2012 |
| 79 | Contact: Alan Cox <alan@linux.intel.com> |
| 80 | Description: |
| 81 | Show the transmit FIFO size for this port. |
| 82 | |
| 83 | These sysfs values expose the TIOCGSERIAL interface via |
| 84 | sysfs rather than via ioctls. |
| 85 | |
| 86 | What: /sys/class/tty/ttyS0/close_delay |
| 87 | Date: October 2012 |
| 88 | Contact: Alan Cox <alan@linux.intel.com> |
| 89 | Description: |
| 90 | Show the closing delay time for this port in ms. |
| 91 | |
| 92 | These sysfs values expose the TIOCGSERIAL interface via |
| 93 | sysfs rather than via ioctls. |
| 94 | |
| 95 | What: /sys/class/tty/ttyS0/closing_wait |
| 96 | Date: October 2012 |
| 97 | Contact: Alan Cox <alan@linux.intel.com> |
| 98 | Description: |
| 99 | Show the close wait time for this port in ms. |
| 100 | |
| 101 | These sysfs values expose the TIOCGSERIAL interface via |
| 102 | sysfs rather than via ioctls. |
| 103 | |
| 104 | What: /sys/class/tty/ttyS0/custom_divisor |
| 105 | Date: October 2012 |
| 106 | Contact: Alan Cox <alan@linux.intel.com> |
| 107 | Description: |
| 108 | Show the custom divisor if any that is set on this port. |
| 109 | |
| 110 | These sysfs values expose the TIOCGSERIAL interface via |
| 111 | sysfs rather than via ioctls. |
| 112 | |
| 113 | What: /sys/class/tty/ttyS0/io_type |
| 114 | Date: October 2012 |
| 115 | Contact: Alan Cox <alan@linux.intel.com> |
| 116 | Description: |
| 117 | Show the I/O type that is to be used with the iomem base |
| 118 | address. |
| 119 | |
| 120 | These sysfs values expose the TIOCGSERIAL interface via |
| 121 | sysfs rather than via ioctls. |
| 122 | |
| 123 | What: /sys/class/tty/ttyS0/iomem_base |
| 124 | Date: October 2012 |
| 125 | Contact: Alan Cox <alan@linux.intel.com> |
| 126 | Description: |
| 127 | The I/O memory base for this port. |
| 128 | |
| 129 | These sysfs values expose the TIOCGSERIAL interface via |
| 130 | sysfs rather than via ioctls. |
| 131 | |
| 132 | What: /sys/class/tty/ttyS0/iomem_reg_shift |
| 133 | Date: October 2012 |
| 134 | Contact: Alan Cox <alan@linux.intel.com> |
| 135 | Description: |
| 136 | Show the register shift indicating the spacing to be used |
| 137 | for accesses on this iomem address. |
| 138 | |
| 139 | These sysfs values expose the TIOCGSERIAL interface via |
| 140 | sysfs rather than via ioctls. |