Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2006 Damien Bergamini <damien.bergamini@free.fr> |
| 3 | * Copyright (c) 2006 Sam Leffler, Errno Consulting |
| 4 | * Copyright (c) 2007 Christoph Hellwig <hch@lst.de> |
| 5 | * Copyright (c) 2008-2009 Weongyo Jeong <weongyo@freebsd.org> |
| 6 | * Copyright (c) 2012 Pontus Fuchs <pontus.fuchs@gmail.com> |
| 7 | * |
| 8 | * Permission to use, copy, modify, and/or distribute this software for any |
| 9 | * purpose with or without fee is hereby granted, provided that the above |
| 10 | * copyright notice and this permission notice appear in all copies. |
| 11 | * |
| 12 | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 13 | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 14 | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 15 | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 16 | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 17 | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 18 | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 19 | */ |
| 20 | |
| 21 | /* |
| 22 | * This driver is based on the uath driver written by Damien Bergamini for |
| 23 | * OpenBSD, who did black-box analysis of the Windows binary driver to find |
| 24 | * out how the hardware works. It contains a lot magic numbers because of |
| 25 | * that and only has minimal functionality. |
| 26 | */ |
| 27 | #include <linux/compiler.h> |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 28 | #include <linux/kernel.h> |
| 29 | #include <linux/module.h> |
| 30 | #include <linux/list.h> |
| 31 | #include <linux/completion.h> |
| 32 | #include <linux/firmware.h> |
| 33 | #include <linux/skbuff.h> |
| 34 | #include <linux/usb.h> |
| 35 | #include <net/mac80211.h> |
| 36 | |
| 37 | #include "ar5523.h" |
| 38 | #include "ar5523_hw.h" |
| 39 | |
| 40 | /* |
| 41 | * Various supported device vendors/products. |
| 42 | * UB51: AR5005UG 802.11b/g, UB52: AR5005UX 802.11a/b/g |
| 43 | */ |
| 44 | |
| 45 | static int ar5523_submit_rx_cmd(struct ar5523 *ar); |
| 46 | static void ar5523_data_tx_pkt_put(struct ar5523 *ar); |
| 47 | |
| 48 | static void ar5523_read_reply(struct ar5523 *ar, struct ar5523_cmd_hdr *hdr, |
| 49 | struct ar5523_tx_cmd *cmd) |
| 50 | { |
| 51 | int dlen, olen; |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 52 | __be32 *rp; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 53 | |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 54 | dlen = be32_to_cpu(hdr->len) - sizeof(*hdr); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 55 | |
| 56 | if (dlen < 0) { |
| 57 | WARN_ON(1); |
| 58 | goto out; |
| 59 | } |
| 60 | |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 61 | ar5523_dbg(ar, "Code = %d len = %d\n", be32_to_cpu(hdr->code) & 0xff, |
| 62 | dlen); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 63 | |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 64 | rp = (__be32 *)(hdr + 1); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 65 | if (dlen >= sizeof(u32)) { |
| 66 | olen = be32_to_cpu(rp[0]); |
| 67 | dlen -= sizeof(u32); |
| 68 | if (olen == 0) { |
| 69 | /* convention is 0 =>'s one word */ |
| 70 | olen = sizeof(u32); |
| 71 | } |
| 72 | } else |
| 73 | olen = 0; |
| 74 | |
| 75 | if (cmd->odata) { |
| 76 | if (cmd->olen < olen) { |
| 77 | ar5523_err(ar, "olen to small %d < %d\n", |
| 78 | cmd->olen, olen); |
| 79 | cmd->olen = 0; |
| 80 | cmd->res = -EOVERFLOW; |
| 81 | } else { |
| 82 | cmd->olen = olen; |
| 83 | memcpy(cmd->odata, &rp[1], olen); |
| 84 | cmd->res = 0; |
| 85 | } |
| 86 | } |
| 87 | |
| 88 | out: |
| 89 | complete(&cmd->done); |
| 90 | } |
| 91 | |
| 92 | static void ar5523_cmd_rx_cb(struct urb *urb) |
| 93 | { |
| 94 | struct ar5523 *ar = urb->context; |
| 95 | struct ar5523_tx_cmd *cmd = &ar->tx_cmd; |
| 96 | struct ar5523_cmd_hdr *hdr = ar->rx_cmd_buf; |
| 97 | int dlen; |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 98 | u32 code, hdrlen; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 99 | |
| 100 | if (urb->status) { |
| 101 | if (urb->status != -ESHUTDOWN) |
| 102 | ar5523_err(ar, "RX USB error %d.\n", urb->status); |
| 103 | goto skip; |
| 104 | } |
| 105 | |
| 106 | if (urb->actual_length < sizeof(struct ar5523_cmd_hdr)) { |
| 107 | ar5523_err(ar, "RX USB to short.\n"); |
| 108 | goto skip; |
| 109 | } |
| 110 | |
| 111 | ar5523_dbg(ar, "%s code %02x priv %d\n", __func__, |
| 112 | be32_to_cpu(hdr->code) & 0xff, hdr->priv); |
| 113 | |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 114 | code = be32_to_cpu(hdr->code); |
| 115 | hdrlen = be32_to_cpu(hdr->len); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 116 | |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 117 | switch (code & 0xff) { |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 118 | default: |
| 119 | /* reply to a read command */ |
| 120 | if (hdr->priv != AR5523_CMD_ID) { |
| 121 | ar5523_err(ar, "Unexpected command id: %02x\n", |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 122 | code & 0xff); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 123 | goto skip; |
| 124 | } |
| 125 | ar5523_read_reply(ar, hdr, cmd); |
| 126 | break; |
| 127 | |
| 128 | case WDCMSG_DEVICE_AVAIL: |
| 129 | ar5523_dbg(ar, "WDCMSG_DEVICE_AVAIL\n"); |
| 130 | cmd->res = 0; |
| 131 | cmd->olen = 0; |
| 132 | complete(&cmd->done); |
| 133 | break; |
| 134 | |
| 135 | case WDCMSG_SEND_COMPLETE: |
| 136 | ar5523_dbg(ar, "WDCMSG_SEND_COMPLETE: %d pending\n", |
| 137 | atomic_read(&ar->tx_nr_pending)); |
| 138 | if (!test_bit(AR5523_HW_UP, &ar->flags)) |
| 139 | ar5523_dbg(ar, "Unexpected WDCMSG_SEND_COMPLETE\n"); |
| 140 | else { |
| 141 | mod_timer(&ar->tx_wd_timer, |
| 142 | jiffies + AR5523_TX_WD_TIMEOUT); |
| 143 | ar5523_data_tx_pkt_put(ar); |
| 144 | |
| 145 | } |
| 146 | break; |
| 147 | |
| 148 | case WDCMSG_TARGET_START: |
| 149 | /* This command returns a bogus id so it needs special |
| 150 | handling */ |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 151 | dlen = hdrlen - sizeof(*hdr); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 152 | if (dlen != (int)sizeof(u32)) { |
| 153 | ar5523_err(ar, "Invalid reply to WDCMSG_TARGET_START"); |
| 154 | return; |
| 155 | } |
| 156 | memcpy(cmd->odata, hdr + 1, sizeof(u32)); |
| 157 | cmd->olen = sizeof(u32); |
| 158 | cmd->res = 0; |
| 159 | complete(&cmd->done); |
| 160 | break; |
| 161 | |
| 162 | case WDCMSG_STATS_UPDATE: |
| 163 | ar5523_dbg(ar, "WDCMSG_STATS_UPDATE\n"); |
| 164 | break; |
| 165 | } |
| 166 | |
| 167 | skip: |
| 168 | ar5523_submit_rx_cmd(ar); |
| 169 | } |
| 170 | |
| 171 | static int ar5523_alloc_rx_cmd(struct ar5523 *ar) |
| 172 | { |
| 173 | ar->rx_cmd_urb = usb_alloc_urb(0, GFP_KERNEL); |
| 174 | if (!ar->rx_cmd_urb) |
| 175 | return -ENOMEM; |
| 176 | |
| 177 | ar->rx_cmd_buf = usb_alloc_coherent(ar->dev, AR5523_MAX_RXCMDSZ, |
| 178 | GFP_KERNEL, |
| 179 | &ar->rx_cmd_urb->transfer_dma); |
| 180 | if (!ar->rx_cmd_buf) { |
| 181 | usb_free_urb(ar->rx_cmd_urb); |
| 182 | return -ENOMEM; |
| 183 | } |
| 184 | return 0; |
| 185 | } |
| 186 | |
| 187 | static void ar5523_cancel_rx_cmd(struct ar5523 *ar) |
| 188 | { |
| 189 | usb_kill_urb(ar->rx_cmd_urb); |
| 190 | } |
| 191 | |
| 192 | static void ar5523_free_rx_cmd(struct ar5523 *ar) |
| 193 | { |
| 194 | usb_free_coherent(ar->dev, AR5523_MAX_RXCMDSZ, |
| 195 | ar->rx_cmd_buf, ar->rx_cmd_urb->transfer_dma); |
| 196 | usb_free_urb(ar->rx_cmd_urb); |
| 197 | } |
| 198 | |
| 199 | static int ar5523_submit_rx_cmd(struct ar5523 *ar) |
| 200 | { |
| 201 | int error; |
| 202 | |
| 203 | usb_fill_bulk_urb(ar->rx_cmd_urb, ar->dev, |
| 204 | ar5523_cmd_rx_pipe(ar->dev), ar->rx_cmd_buf, |
| 205 | AR5523_MAX_RXCMDSZ, ar5523_cmd_rx_cb, ar); |
| 206 | ar->rx_cmd_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 207 | |
| 208 | error = usb_submit_urb(ar->rx_cmd_urb, GFP_ATOMIC); |
| 209 | if (error) { |
| 210 | if (error != -ENODEV) |
| 211 | ar5523_err(ar, "error %d when submitting rx urb\n", |
| 212 | error); |
| 213 | return error; |
| 214 | } |
| 215 | return 0; |
| 216 | } |
| 217 | |
| 218 | /* |
| 219 | * Command submitted cb |
| 220 | */ |
| 221 | static void ar5523_cmd_tx_cb(struct urb *urb) |
| 222 | { |
| 223 | struct ar5523_tx_cmd *cmd = urb->context; |
| 224 | struct ar5523 *ar = cmd->ar; |
| 225 | |
| 226 | if (urb->status) { |
| 227 | ar5523_err(ar, "Failed to TX command. Status = %d\n", |
| 228 | urb->status); |
| 229 | cmd->res = urb->status; |
| 230 | complete(&cmd->done); |
| 231 | return; |
| 232 | } |
| 233 | |
| 234 | if (!(cmd->flags & AR5523_CMD_FLAG_READ)) { |
| 235 | cmd->res = 0; |
| 236 | complete(&cmd->done); |
| 237 | } |
| 238 | } |
| 239 | |
| 240 | static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata, |
| 241 | int ilen, void *odata, int olen, int flags) |
| 242 | { |
| 243 | struct ar5523_cmd_hdr *hdr; |
| 244 | struct ar5523_tx_cmd *cmd = &ar->tx_cmd; |
| 245 | int xferlen, error; |
| 246 | |
| 247 | /* always bulk-out a multiple of 4 bytes */ |
| 248 | xferlen = (sizeof(struct ar5523_cmd_hdr) + ilen + 3) & ~3; |
| 249 | |
| 250 | hdr = (struct ar5523_cmd_hdr *)cmd->buf_tx; |
| 251 | memset(hdr, 0, sizeof(struct ar5523_cmd_hdr)); |
| 252 | hdr->len = cpu_to_be32(xferlen); |
| 253 | hdr->code = cpu_to_be32(code); |
| 254 | hdr->priv = AR5523_CMD_ID; |
| 255 | |
| 256 | if (flags & AR5523_CMD_FLAG_MAGIC) |
| 257 | hdr->magic = cpu_to_be32(1 << 24); |
| 258 | memcpy(hdr + 1, idata, ilen); |
| 259 | |
| 260 | cmd->odata = odata; |
| 261 | cmd->olen = olen; |
| 262 | cmd->flags = flags; |
| 263 | |
| 264 | ar5523_dbg(ar, "do cmd %02x\n", code); |
| 265 | |
| 266 | usb_fill_bulk_urb(cmd->urb_tx, ar->dev, ar5523_cmd_tx_pipe(ar->dev), |
| 267 | cmd->buf_tx, xferlen, ar5523_cmd_tx_cb, cmd); |
| 268 | cmd->urb_tx->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 269 | |
| 270 | error = usb_submit_urb(cmd->urb_tx, GFP_KERNEL); |
| 271 | if (error) { |
| 272 | ar5523_err(ar, "could not send command 0x%x, error=%d\n", |
| 273 | code, error); |
| 274 | return error; |
| 275 | } |
| 276 | |
| 277 | if (!wait_for_completion_timeout(&cmd->done, 2 * HZ)) { |
| 278 | cmd->odata = NULL; |
| 279 | ar5523_err(ar, "timeout waiting for command %02x reply\n", |
| 280 | code); |
| 281 | cmd->res = -ETIMEDOUT; |
| 282 | } |
| 283 | return cmd->res; |
| 284 | } |
| 285 | |
| 286 | static int ar5523_cmd_write(struct ar5523 *ar, u32 code, const void *data, |
| 287 | int len, int flags) |
| 288 | { |
| 289 | flags &= ~AR5523_CMD_FLAG_READ; |
| 290 | return ar5523_cmd(ar, code, data, len, NULL, 0, flags); |
| 291 | } |
| 292 | |
| 293 | static int ar5523_cmd_read(struct ar5523 *ar, u32 code, const void *idata, |
| 294 | int ilen, void *odata, int olen, int flags) |
| 295 | { |
| 296 | flags |= AR5523_CMD_FLAG_READ; |
| 297 | return ar5523_cmd(ar, code, idata, ilen, odata, olen, flags); |
| 298 | } |
| 299 | |
| 300 | static int ar5523_config(struct ar5523 *ar, u32 reg, u32 val) |
| 301 | { |
| 302 | struct ar5523_write_mac write; |
| 303 | int error; |
| 304 | |
| 305 | write.reg = cpu_to_be32(reg); |
| 306 | write.len = cpu_to_be32(0); /* 0 = single write */ |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 307 | *(__be32 *)write.data = cpu_to_be32(val); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 308 | |
| 309 | error = ar5523_cmd_write(ar, WDCMSG_TARGET_SET_CONFIG, &write, |
| 310 | 3 * sizeof(u32), 0); |
| 311 | if (error != 0) |
| 312 | ar5523_err(ar, "could not write register 0x%02x\n", reg); |
| 313 | return error; |
| 314 | } |
| 315 | |
| 316 | static int ar5523_config_multi(struct ar5523 *ar, u32 reg, const void *data, |
| 317 | int len) |
| 318 | { |
| 319 | struct ar5523_write_mac write; |
| 320 | int error; |
| 321 | |
| 322 | write.reg = cpu_to_be32(reg); |
| 323 | write.len = cpu_to_be32(len); |
| 324 | memcpy(write.data, data, len); |
| 325 | |
| 326 | /* properly handle the case where len is zero (reset) */ |
| 327 | error = ar5523_cmd_write(ar, WDCMSG_TARGET_SET_CONFIG, &write, |
| 328 | (len == 0) ? sizeof(u32) : 2 * sizeof(u32) + len, 0); |
| 329 | if (error != 0) |
| 330 | ar5523_err(ar, "could not write %d bytes to register 0x%02x\n", |
| 331 | len, reg); |
| 332 | return error; |
| 333 | } |
| 334 | |
| 335 | static int ar5523_get_status(struct ar5523 *ar, u32 which, void *odata, |
| 336 | int olen) |
| 337 | { |
| 338 | int error; |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 339 | __be32 which_be; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 340 | |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 341 | which_be = cpu_to_be32(which); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 342 | error = ar5523_cmd_read(ar, WDCMSG_TARGET_GET_STATUS, |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 343 | &which_be, sizeof(which_be), odata, olen, AR5523_CMD_FLAG_MAGIC); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 344 | if (error != 0) |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 345 | ar5523_err(ar, "could not read EEPROM offset 0x%02x\n", which); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 346 | return error; |
| 347 | } |
| 348 | |
| 349 | static int ar5523_get_capability(struct ar5523 *ar, u32 cap, u32 *val) |
| 350 | { |
| 351 | int error; |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 352 | __be32 cap_be, val_be; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 353 | |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 354 | cap_be = cpu_to_be32(cap); |
| 355 | error = ar5523_cmd_read(ar, WDCMSG_TARGET_GET_CAPABILITY, &cap_be, |
| 356 | sizeof(cap_be), &val_be, sizeof(__be32), |
| 357 | AR5523_CMD_FLAG_MAGIC); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 358 | if (error != 0) { |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 359 | ar5523_err(ar, "could not read capability %u\n", cap); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 360 | return error; |
| 361 | } |
Pontus Fuchs | d01a303 | 2012-11-05 21:17:50 +0100 | [diff] [blame] | 362 | *val = be32_to_cpu(val_be); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 363 | return error; |
| 364 | } |
| 365 | |
| 366 | static int ar5523_get_devcap(struct ar5523 *ar) |
| 367 | { |
| 368 | #define GETCAP(x) do { \ |
| 369 | error = ar5523_get_capability(ar, x, &cap); \ |
| 370 | if (error != 0) \ |
| 371 | return error; \ |
| 372 | ar5523_info(ar, "Cap: " \ |
| 373 | "%s=0x%08x\n", #x, cap); \ |
| 374 | } while (0) |
| 375 | int error; |
| 376 | u32 cap; |
| 377 | |
| 378 | /* collect device capabilities */ |
| 379 | GETCAP(CAP_TARGET_VERSION); |
| 380 | GETCAP(CAP_TARGET_REVISION); |
| 381 | GETCAP(CAP_MAC_VERSION); |
| 382 | GETCAP(CAP_MAC_REVISION); |
| 383 | GETCAP(CAP_PHY_REVISION); |
| 384 | GETCAP(CAP_ANALOG_5GHz_REVISION); |
| 385 | GETCAP(CAP_ANALOG_2GHz_REVISION); |
| 386 | |
| 387 | GETCAP(CAP_REG_DOMAIN); |
| 388 | GETCAP(CAP_REG_CAP_BITS); |
| 389 | GETCAP(CAP_WIRELESS_MODES); |
| 390 | GETCAP(CAP_CHAN_SPREAD_SUPPORT); |
| 391 | GETCAP(CAP_COMPRESS_SUPPORT); |
| 392 | GETCAP(CAP_BURST_SUPPORT); |
| 393 | GETCAP(CAP_FAST_FRAMES_SUPPORT); |
| 394 | GETCAP(CAP_CHAP_TUNING_SUPPORT); |
| 395 | GETCAP(CAP_TURBOG_SUPPORT); |
| 396 | GETCAP(CAP_TURBO_PRIME_SUPPORT); |
| 397 | GETCAP(CAP_DEVICE_TYPE); |
| 398 | GETCAP(CAP_WME_SUPPORT); |
| 399 | GETCAP(CAP_TOTAL_QUEUES); |
| 400 | GETCAP(CAP_CONNECTION_ID_MAX); |
| 401 | |
| 402 | GETCAP(CAP_LOW_5GHZ_CHAN); |
| 403 | GETCAP(CAP_HIGH_5GHZ_CHAN); |
| 404 | GETCAP(CAP_LOW_2GHZ_CHAN); |
| 405 | GETCAP(CAP_HIGH_2GHZ_CHAN); |
| 406 | GETCAP(CAP_TWICE_ANTENNAGAIN_5G); |
| 407 | GETCAP(CAP_TWICE_ANTENNAGAIN_2G); |
| 408 | |
| 409 | GETCAP(CAP_CIPHER_AES_CCM); |
| 410 | GETCAP(CAP_CIPHER_TKIP); |
| 411 | GETCAP(CAP_MIC_TKIP); |
| 412 | return 0; |
| 413 | } |
| 414 | |
| 415 | static int ar5523_set_ledsteady(struct ar5523 *ar, int lednum, int ledmode) |
| 416 | { |
| 417 | struct ar5523_cmd_ledsteady led; |
| 418 | |
| 419 | led.lednum = cpu_to_be32(lednum); |
| 420 | led.ledmode = cpu_to_be32(ledmode); |
| 421 | |
| 422 | ar5523_dbg(ar, "set %s led %s (steady)\n", |
| 423 | (lednum == UATH_LED_LINK) ? "link" : "activity", |
| 424 | ledmode ? "on" : "off"); |
| 425 | return ar5523_cmd_write(ar, WDCMSG_SET_LED_STEADY, &led, sizeof(led), |
| 426 | 0); |
| 427 | } |
| 428 | |
| 429 | static int ar5523_set_rxfilter(struct ar5523 *ar, u32 bits, u32 op) |
| 430 | { |
| 431 | struct ar5523_cmd_rx_filter rxfilter; |
| 432 | |
| 433 | rxfilter.bits = cpu_to_be32(bits); |
| 434 | rxfilter.op = cpu_to_be32(op); |
| 435 | |
| 436 | ar5523_dbg(ar, "setting Rx filter=0x%x flags=0x%x\n", bits, op); |
| 437 | return ar5523_cmd_write(ar, WDCMSG_RX_FILTER, &rxfilter, |
| 438 | sizeof(rxfilter), 0); |
| 439 | } |
| 440 | |
| 441 | static int ar5523_reset_tx_queues(struct ar5523 *ar) |
| 442 | { |
| 443 | __be32 qid = cpu_to_be32(0); |
| 444 | |
| 445 | ar5523_dbg(ar, "resetting Tx queue\n"); |
| 446 | return ar5523_cmd_write(ar, WDCMSG_RELEASE_TX_QUEUE, |
| 447 | &qid, sizeof(qid), 0); |
| 448 | } |
| 449 | |
| 450 | static int ar5523_set_chan(struct ar5523 *ar) |
| 451 | { |
| 452 | struct ieee80211_conf *conf = &ar->hw->conf; |
| 453 | |
| 454 | struct ar5523_cmd_reset reset; |
| 455 | |
| 456 | memset(&reset, 0, sizeof(reset)); |
| 457 | reset.flags |= cpu_to_be32(UATH_CHAN_2GHZ); |
| 458 | reset.flags |= cpu_to_be32(UATH_CHAN_OFDM); |
Karl Beldan | 675a0b0 | 2013-03-25 16:26:57 +0100 | [diff] [blame] | 459 | reset.freq = cpu_to_be32(conf->chandef.chan->center_freq); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 460 | reset.maxrdpower = cpu_to_be32(50); /* XXX */ |
| 461 | reset.channelchange = cpu_to_be32(1); |
| 462 | reset.keeprccontent = cpu_to_be32(0); |
| 463 | |
| 464 | ar5523_dbg(ar, "set chan flags 0x%x freq %d\n", |
| 465 | be32_to_cpu(reset.flags), |
Karl Beldan | 675a0b0 | 2013-03-25 16:26:57 +0100 | [diff] [blame] | 466 | conf->chandef.chan->center_freq); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 467 | return ar5523_cmd_write(ar, WDCMSG_RESET, &reset, sizeof(reset), 0); |
| 468 | } |
| 469 | |
| 470 | static int ar5523_queue_init(struct ar5523 *ar) |
| 471 | { |
| 472 | struct ar5523_cmd_txq_setup qinfo; |
| 473 | |
| 474 | ar5523_dbg(ar, "setting up Tx queue\n"); |
| 475 | qinfo.qid = cpu_to_be32(0); |
| 476 | qinfo.len = cpu_to_be32(sizeof(qinfo.attr)); |
| 477 | qinfo.attr.priority = cpu_to_be32(0); /* XXX */ |
| 478 | qinfo.attr.aifs = cpu_to_be32(3); |
| 479 | qinfo.attr.logcwmin = cpu_to_be32(4); |
| 480 | qinfo.attr.logcwmax = cpu_to_be32(10); |
| 481 | qinfo.attr.bursttime = cpu_to_be32(0); |
| 482 | qinfo.attr.mode = cpu_to_be32(0); |
| 483 | qinfo.attr.qflags = cpu_to_be32(1); /* XXX? */ |
| 484 | return ar5523_cmd_write(ar, WDCMSG_SETUP_TX_QUEUE, &qinfo, |
| 485 | sizeof(qinfo), 0); |
| 486 | } |
| 487 | |
| 488 | static int ar5523_switch_chan(struct ar5523 *ar) |
| 489 | { |
| 490 | int error; |
| 491 | |
| 492 | error = ar5523_set_chan(ar); |
| 493 | if (error) { |
| 494 | ar5523_err(ar, "could not set chan, error %d\n", error); |
| 495 | goto out_err; |
| 496 | } |
| 497 | |
| 498 | /* reset Tx rings */ |
| 499 | error = ar5523_reset_tx_queues(ar); |
| 500 | if (error) { |
| 501 | ar5523_err(ar, "could not reset Tx queues, error %d\n", |
| 502 | error); |
| 503 | goto out_err; |
| 504 | } |
| 505 | /* set Tx rings WME properties */ |
| 506 | error = ar5523_queue_init(ar); |
| 507 | if (error) |
| 508 | ar5523_err(ar, "could not init wme, error %d\n", error); |
| 509 | |
| 510 | out_err: |
| 511 | return error; |
| 512 | } |
| 513 | |
| 514 | static void ar5523_rx_data_put(struct ar5523 *ar, |
| 515 | struct ar5523_rx_data *data) |
| 516 | { |
| 517 | unsigned long flags; |
| 518 | spin_lock_irqsave(&ar->rx_data_list_lock, flags); |
| 519 | list_move(&data->list, &ar->rx_data_free); |
| 520 | spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); |
| 521 | } |
| 522 | |
| 523 | static void ar5523_data_rx_cb(struct urb *urb) |
| 524 | { |
| 525 | struct ar5523_rx_data *data = urb->context; |
| 526 | struct ar5523 *ar = data->ar; |
| 527 | struct ar5523_rx_desc *desc; |
| 528 | struct ar5523_chunk *chunk; |
| 529 | struct ieee80211_hw *hw = ar->hw; |
| 530 | struct ieee80211_rx_status *rx_status; |
| 531 | u32 rxlen; |
| 532 | int usblen = urb->actual_length; |
| 533 | int hdrlen, pad; |
| 534 | |
| 535 | ar5523_dbg(ar, "%s\n", __func__); |
| 536 | /* sync/async unlink faults aren't errors */ |
| 537 | if (urb->status) { |
| 538 | if (urb->status != -ESHUTDOWN) |
| 539 | ar5523_err(ar, "%s: USB err: %d\n", __func__, |
| 540 | urb->status); |
| 541 | goto skip; |
| 542 | } |
| 543 | |
| 544 | if (usblen < AR5523_MIN_RXBUFSZ) { |
| 545 | ar5523_err(ar, "RX: wrong xfer size (usblen=%d)\n", usblen); |
| 546 | goto skip; |
| 547 | } |
| 548 | |
| 549 | chunk = (struct ar5523_chunk *) data->skb->data; |
| 550 | |
| 551 | if (((chunk->flags & UATH_CFLAGS_FINAL) == 0) || |
| 552 | chunk->seqnum != 0) { |
| 553 | ar5523_dbg(ar, "RX: No final flag. s: %d f: %02x l: %d\n", |
| 554 | chunk->seqnum, chunk->flags, |
| 555 | be16_to_cpu(chunk->length)); |
| 556 | goto skip; |
| 557 | } |
| 558 | |
| 559 | /* Rx descriptor is located at the end, 32-bit aligned */ |
| 560 | desc = (struct ar5523_rx_desc *) |
| 561 | (data->skb->data + usblen - sizeof(struct ar5523_rx_desc)); |
| 562 | |
| 563 | rxlen = be32_to_cpu(desc->len); |
| 564 | if (rxlen > ar->rxbufsz) { |
| 565 | ar5523_dbg(ar, "RX: Bad descriptor (len=%d)\n", |
| 566 | be32_to_cpu(desc->len)); |
| 567 | goto skip; |
| 568 | } |
| 569 | |
| 570 | if (!rxlen) { |
| 571 | ar5523_dbg(ar, "RX: rxlen is 0\n"); |
| 572 | goto skip; |
| 573 | } |
| 574 | |
| 575 | if (be32_to_cpu(desc->status) != 0) { |
| 576 | ar5523_dbg(ar, "Bad RX status (0x%x len = %d). Skip\n", |
| 577 | be32_to_cpu(desc->status), be32_to_cpu(desc->len)); |
| 578 | goto skip; |
| 579 | } |
| 580 | |
| 581 | skb_reserve(data->skb, sizeof(*chunk)); |
| 582 | skb_put(data->skb, rxlen - sizeof(struct ar5523_rx_desc)); |
| 583 | |
| 584 | hdrlen = ieee80211_get_hdrlen_from_skb(data->skb); |
| 585 | if (!IS_ALIGNED(hdrlen, 4)) { |
| 586 | ar5523_dbg(ar, "eek, alignment workaround activated\n"); |
| 587 | pad = ALIGN(hdrlen, 4) - hdrlen; |
| 588 | memmove(data->skb->data + pad, data->skb->data, hdrlen); |
| 589 | skb_pull(data->skb, pad); |
| 590 | skb_put(data->skb, pad); |
| 591 | } |
| 592 | |
| 593 | rx_status = IEEE80211_SKB_RXCB(data->skb); |
| 594 | memset(rx_status, 0, sizeof(*rx_status)); |
| 595 | rx_status->freq = be32_to_cpu(desc->channel); |
Karl Beldan | 675a0b0 | 2013-03-25 16:26:57 +0100 | [diff] [blame] | 596 | rx_status->band = hw->conf.chandef.chan->band; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 597 | rx_status->signal = -95 + be32_to_cpu(desc->rssi); |
| 598 | |
| 599 | ieee80211_rx_irqsafe(hw, data->skb); |
| 600 | data->skb = NULL; |
| 601 | |
| 602 | skip: |
| 603 | if (data->skb) { |
| 604 | dev_kfree_skb_irq(data->skb); |
| 605 | data->skb = NULL; |
| 606 | } |
| 607 | |
| 608 | ar5523_rx_data_put(ar, data); |
| 609 | if (atomic_inc_return(&ar->rx_data_free_cnt) >= |
| 610 | AR5523_RX_DATA_REFILL_COUNT && |
| 611 | test_bit(AR5523_HW_UP, &ar->flags)) |
| 612 | queue_work(ar->wq, &ar->rx_refill_work); |
| 613 | } |
| 614 | |
| 615 | static void ar5523_rx_refill_work(struct work_struct *work) |
| 616 | { |
| 617 | struct ar5523 *ar = container_of(work, struct ar5523, rx_refill_work); |
| 618 | struct ar5523_rx_data *data; |
| 619 | unsigned long flags; |
| 620 | int error; |
| 621 | |
| 622 | ar5523_dbg(ar, "%s\n", __func__); |
| 623 | do { |
| 624 | spin_lock_irqsave(&ar->rx_data_list_lock, flags); |
| 625 | |
| 626 | if (!list_empty(&ar->rx_data_free)) |
| 627 | data = (struct ar5523_rx_data *) ar->rx_data_free.next; |
| 628 | else |
| 629 | data = NULL; |
| 630 | spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); |
| 631 | |
| 632 | if (!data) |
| 633 | goto done; |
| 634 | |
| 635 | data->skb = alloc_skb(ar->rxbufsz, GFP_KERNEL); |
| 636 | if (!data->skb) { |
| 637 | ar5523_err(ar, "could not allocate rx skbuff\n"); |
| 638 | return; |
| 639 | } |
| 640 | |
| 641 | usb_fill_bulk_urb(data->urb, ar->dev, |
| 642 | ar5523_data_rx_pipe(ar->dev), data->skb->data, |
| 643 | ar->rxbufsz, ar5523_data_rx_cb, data); |
| 644 | |
| 645 | spin_lock_irqsave(&ar->rx_data_list_lock, flags); |
| 646 | list_move(&data->list, &ar->rx_data_used); |
| 647 | spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); |
| 648 | atomic_dec(&ar->rx_data_free_cnt); |
| 649 | |
| 650 | error = usb_submit_urb(data->urb, GFP_KERNEL); |
| 651 | if (error) { |
| 652 | kfree_skb(data->skb); |
| 653 | if (error != -ENODEV) |
| 654 | ar5523_err(ar, "Err sending rx data urb %d\n", |
| 655 | error); |
| 656 | ar5523_rx_data_put(ar, data); |
| 657 | atomic_inc(&ar->rx_data_free_cnt); |
| 658 | return; |
| 659 | } |
| 660 | |
| 661 | } while (true); |
| 662 | done: |
| 663 | return; |
| 664 | } |
| 665 | |
| 666 | static void ar5523_cancel_rx_bufs(struct ar5523 *ar) |
| 667 | { |
| 668 | struct ar5523_rx_data *data; |
| 669 | unsigned long flags; |
| 670 | |
| 671 | do { |
| 672 | spin_lock_irqsave(&ar->rx_data_list_lock, flags); |
| 673 | if (!list_empty(&ar->rx_data_used)) |
| 674 | data = (struct ar5523_rx_data *) ar->rx_data_used.next; |
| 675 | else |
| 676 | data = NULL; |
| 677 | spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); |
| 678 | |
| 679 | if (!data) |
| 680 | break; |
| 681 | |
| 682 | usb_kill_urb(data->urb); |
| 683 | list_move(&data->list, &ar->rx_data_free); |
| 684 | atomic_inc(&ar->rx_data_free_cnt); |
| 685 | } while (data); |
| 686 | } |
| 687 | |
| 688 | static void ar5523_free_rx_bufs(struct ar5523 *ar) |
| 689 | { |
| 690 | struct ar5523_rx_data *data; |
| 691 | |
| 692 | ar5523_cancel_rx_bufs(ar); |
| 693 | while (!list_empty(&ar->rx_data_free)) { |
| 694 | data = (struct ar5523_rx_data *) ar->rx_data_free.next; |
| 695 | list_del(&data->list); |
| 696 | usb_free_urb(data->urb); |
| 697 | } |
| 698 | } |
| 699 | |
| 700 | static int ar5523_alloc_rx_bufs(struct ar5523 *ar) |
| 701 | { |
| 702 | int i; |
| 703 | |
| 704 | for (i = 0; i < AR5523_RX_DATA_COUNT; i++) { |
| 705 | struct ar5523_rx_data *data = &ar->rx_data[i]; |
| 706 | |
| 707 | data->ar = ar; |
| 708 | data->urb = usb_alloc_urb(0, GFP_KERNEL); |
| 709 | if (!data->urb) { |
| 710 | ar5523_err(ar, "could not allocate rx data urb\n"); |
| 711 | goto err; |
| 712 | } |
| 713 | list_add_tail(&data->list, &ar->rx_data_free); |
| 714 | atomic_inc(&ar->rx_data_free_cnt); |
| 715 | } |
| 716 | return 0; |
| 717 | |
| 718 | err: |
| 719 | ar5523_free_rx_bufs(ar); |
| 720 | return -ENOMEM; |
| 721 | } |
| 722 | |
| 723 | static void ar5523_data_tx_pkt_put(struct ar5523 *ar) |
| 724 | { |
| 725 | atomic_dec(&ar->tx_nr_total); |
| 726 | if (!atomic_dec_return(&ar->tx_nr_pending)) { |
| 727 | del_timer(&ar->tx_wd_timer); |
| 728 | wake_up(&ar->tx_flush_waitq); |
| 729 | } |
| 730 | |
| 731 | if (atomic_read(&ar->tx_nr_total) < AR5523_TX_DATA_RESTART_COUNT) { |
| 732 | ar5523_dbg(ar, "restart tx queue\n"); |
| 733 | ieee80211_wake_queues(ar->hw); |
| 734 | } |
| 735 | } |
| 736 | |
| 737 | static void ar5523_data_tx_cb(struct urb *urb) |
| 738 | { |
| 739 | struct sk_buff *skb = urb->context; |
| 740 | struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(skb); |
| 741 | struct ar5523_tx_data *data = (struct ar5523_tx_data *) |
| 742 | txi->driver_data; |
| 743 | struct ar5523 *ar = data->ar; |
| 744 | unsigned long flags; |
| 745 | |
| 746 | ar5523_dbg(ar, "data tx urb completed: %d\n", urb->status); |
| 747 | |
| 748 | spin_lock_irqsave(&ar->tx_data_list_lock, flags); |
| 749 | list_del(&data->list); |
| 750 | spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); |
| 751 | |
| 752 | if (urb->status) { |
| 753 | ar5523_dbg(ar, "%s: urb status: %d\n", __func__, urb->status); |
| 754 | ar5523_data_tx_pkt_put(ar); |
| 755 | ieee80211_free_txskb(ar->hw, skb); |
| 756 | } else { |
| 757 | skb_pull(skb, sizeof(struct ar5523_tx_desc) + sizeof(__be32)); |
| 758 | ieee80211_tx_status_irqsafe(ar->hw, skb); |
| 759 | } |
| 760 | usb_free_urb(urb); |
| 761 | } |
| 762 | |
| 763 | static void ar5523_tx(struct ieee80211_hw *hw, |
| 764 | struct ieee80211_tx_control *control, |
| 765 | struct sk_buff *skb) |
| 766 | { |
| 767 | struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(skb); |
| 768 | struct ar5523_tx_data *data = (struct ar5523_tx_data *) |
| 769 | txi->driver_data; |
| 770 | struct ar5523 *ar = hw->priv; |
| 771 | unsigned long flags; |
| 772 | |
| 773 | ar5523_dbg(ar, "tx called\n"); |
| 774 | if (atomic_inc_return(&ar->tx_nr_total) >= AR5523_TX_DATA_COUNT) { |
| 775 | ar5523_dbg(ar, "tx queue full\n"); |
| 776 | ar5523_dbg(ar, "stop queues (tot %d pend %d)\n", |
| 777 | atomic_read(&ar->tx_nr_total), |
| 778 | atomic_read(&ar->tx_nr_pending)); |
| 779 | ieee80211_stop_queues(hw); |
| 780 | } |
| 781 | |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 782 | spin_lock_irqsave(&ar->tx_data_list_lock, flags); |
| 783 | list_add_tail(&data->list, &ar->tx_queue_pending); |
| 784 | spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); |
| 785 | |
| 786 | ieee80211_queue_work(ar->hw, &ar->tx_work); |
| 787 | } |
| 788 | |
| 789 | static void ar5523_tx_work_locked(struct ar5523 *ar) |
| 790 | { |
| 791 | struct ar5523_tx_data *data; |
| 792 | struct ar5523_tx_desc *desc; |
| 793 | struct ar5523_chunk *chunk; |
| 794 | struct ieee80211_tx_info *txi; |
| 795 | struct urb *urb; |
| 796 | struct sk_buff *skb; |
| 797 | int error = 0, paylen; |
| 798 | u32 txqid; |
| 799 | unsigned long flags; |
| 800 | |
| 801 | BUILD_BUG_ON(sizeof(struct ar5523_tx_data) > |
| 802 | IEEE80211_TX_INFO_DRIVER_DATA_SIZE); |
| 803 | |
| 804 | ar5523_dbg(ar, "%s\n", __func__); |
| 805 | do { |
| 806 | spin_lock_irqsave(&ar->tx_data_list_lock, flags); |
| 807 | if (!list_empty(&ar->tx_queue_pending)) { |
| 808 | data = (struct ar5523_tx_data *) |
| 809 | ar->tx_queue_pending.next; |
| 810 | list_del(&data->list); |
| 811 | } else |
| 812 | data = NULL; |
| 813 | spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); |
| 814 | |
| 815 | if (!data) |
| 816 | break; |
| 817 | |
Florian Westphal | 6faf22d | 2015-03-10 15:25:39 +0100 | [diff] [blame] | 818 | txi = container_of((void *)data, struct ieee80211_tx_info, |
| 819 | driver_data); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 820 | txqid = 0; |
Florian Westphal | 6faf22d | 2015-03-10 15:25:39 +0100 | [diff] [blame] | 821 | |
| 822 | skb = container_of((void *)txi, struct sk_buff, cb); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 823 | paylen = skb->len; |
Florian Westphal | 6faf22d | 2015-03-10 15:25:39 +0100 | [diff] [blame] | 824 | |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 825 | urb = usb_alloc_urb(0, GFP_KERNEL); |
| 826 | if (!urb) { |
| 827 | ar5523_err(ar, "Failed to allocate TX urb\n"); |
| 828 | ieee80211_free_txskb(ar->hw, skb); |
| 829 | continue; |
| 830 | } |
| 831 | |
| 832 | data->ar = ar; |
| 833 | data->urb = urb; |
| 834 | |
| 835 | desc = (struct ar5523_tx_desc *)skb_push(skb, sizeof(*desc)); |
| 836 | chunk = (struct ar5523_chunk *)skb_push(skb, sizeof(*chunk)); |
| 837 | |
| 838 | chunk->seqnum = 0; |
| 839 | chunk->flags = UATH_CFLAGS_FINAL; |
| 840 | chunk->length = cpu_to_be16(skb->len); |
| 841 | |
| 842 | desc->msglen = cpu_to_be32(skb->len); |
| 843 | desc->msgid = AR5523_DATA_ID; |
| 844 | desc->buflen = cpu_to_be32(paylen); |
| 845 | desc->type = cpu_to_be32(WDCMSG_SEND); |
| 846 | desc->flags = cpu_to_be32(UATH_TX_NOTIFY); |
| 847 | |
| 848 | if (test_bit(AR5523_CONNECTED, &ar->flags)) |
| 849 | desc->connid = cpu_to_be32(AR5523_ID_BSS); |
| 850 | else |
| 851 | desc->connid = cpu_to_be32(AR5523_ID_BROADCAST); |
| 852 | |
| 853 | if (txi->flags & IEEE80211_TX_CTL_USE_MINRATE) |
| 854 | txqid |= UATH_TXQID_MINRATE; |
| 855 | |
| 856 | desc->txqid = cpu_to_be32(txqid); |
| 857 | |
| 858 | urb->transfer_flags = URB_ZERO_PACKET; |
| 859 | usb_fill_bulk_urb(urb, ar->dev, ar5523_data_tx_pipe(ar->dev), |
| 860 | skb->data, skb->len, ar5523_data_tx_cb, skb); |
| 861 | |
| 862 | spin_lock_irqsave(&ar->tx_data_list_lock, flags); |
| 863 | list_add_tail(&data->list, &ar->tx_queue_submitted); |
| 864 | spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); |
| 865 | mod_timer(&ar->tx_wd_timer, jiffies + AR5523_TX_WD_TIMEOUT); |
| 866 | atomic_inc(&ar->tx_nr_pending); |
| 867 | |
| 868 | ar5523_dbg(ar, "TX Frame (%d pending)\n", |
| 869 | atomic_read(&ar->tx_nr_pending)); |
| 870 | error = usb_submit_urb(urb, GFP_KERNEL); |
| 871 | if (error) { |
| 872 | ar5523_err(ar, "error %d when submitting tx urb\n", |
| 873 | error); |
| 874 | spin_lock_irqsave(&ar->tx_data_list_lock, flags); |
| 875 | list_del(&data->list); |
| 876 | spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); |
| 877 | atomic_dec(&ar->tx_nr_pending); |
| 878 | ar5523_data_tx_pkt_put(ar); |
| 879 | usb_free_urb(urb); |
| 880 | ieee80211_free_txskb(ar->hw, skb); |
| 881 | } |
| 882 | } while (true); |
| 883 | } |
| 884 | |
| 885 | static void ar5523_tx_work(struct work_struct *work) |
| 886 | { |
| 887 | struct ar5523 *ar = container_of(work, struct ar5523, tx_work); |
| 888 | |
| 889 | ar5523_dbg(ar, "%s\n", __func__); |
| 890 | mutex_lock(&ar->mutex); |
| 891 | ar5523_tx_work_locked(ar); |
| 892 | mutex_unlock(&ar->mutex); |
| 893 | } |
| 894 | |
| 895 | static void ar5523_tx_wd_timer(unsigned long arg) |
| 896 | { |
| 897 | struct ar5523 *ar = (struct ar5523 *) arg; |
| 898 | |
| 899 | ar5523_dbg(ar, "TX watchdog timer triggered\n"); |
| 900 | ieee80211_queue_work(ar->hw, &ar->tx_wd_work); |
| 901 | } |
| 902 | |
| 903 | static void ar5523_tx_wd_work(struct work_struct *work) |
| 904 | { |
| 905 | struct ar5523 *ar = container_of(work, struct ar5523, tx_wd_work); |
| 906 | |
| 907 | /* Occasionally the TX queues stop responding. The only way to |
| 908 | * recover seems to be to reset the dongle. |
| 909 | */ |
| 910 | |
| 911 | mutex_lock(&ar->mutex); |
| 912 | ar5523_err(ar, "TX queue stuck (tot %d pend %d)\n", |
| 913 | atomic_read(&ar->tx_nr_total), |
| 914 | atomic_read(&ar->tx_nr_pending)); |
| 915 | |
| 916 | ar5523_err(ar, "Will restart dongle.\n"); |
| 917 | ar5523_cmd_write(ar, WDCMSG_TARGET_RESET, NULL, 0, 0); |
| 918 | mutex_unlock(&ar->mutex); |
| 919 | } |
| 920 | |
| 921 | static void ar5523_flush_tx(struct ar5523 *ar) |
| 922 | { |
| 923 | ar5523_tx_work_locked(ar); |
| 924 | |
| 925 | /* Don't waste time trying to flush if USB is disconnected */ |
| 926 | if (test_bit(AR5523_USB_DISCONNECTED, &ar->flags)) |
| 927 | return; |
| 928 | if (!wait_event_timeout(ar->tx_flush_waitq, |
| 929 | !atomic_read(&ar->tx_nr_pending), AR5523_FLUSH_TIMEOUT)) |
| 930 | ar5523_err(ar, "flush timeout (tot %d pend %d)\n", |
| 931 | atomic_read(&ar->tx_nr_total), |
| 932 | atomic_read(&ar->tx_nr_pending)); |
| 933 | } |
| 934 | |
| 935 | static void ar5523_free_tx_cmd(struct ar5523 *ar) |
| 936 | { |
| 937 | struct ar5523_tx_cmd *cmd = &ar->tx_cmd; |
| 938 | |
| 939 | usb_free_coherent(ar->dev, AR5523_MAX_RXCMDSZ, cmd->buf_tx, |
| 940 | cmd->urb_tx->transfer_dma); |
| 941 | usb_free_urb(cmd->urb_tx); |
| 942 | } |
| 943 | |
| 944 | static int ar5523_alloc_tx_cmd(struct ar5523 *ar) |
| 945 | { |
| 946 | struct ar5523_tx_cmd *cmd = &ar->tx_cmd; |
| 947 | |
| 948 | cmd->ar = ar; |
| 949 | init_completion(&cmd->done); |
| 950 | |
| 951 | cmd->urb_tx = usb_alloc_urb(0, GFP_KERNEL); |
| 952 | if (!cmd->urb_tx) { |
| 953 | ar5523_err(ar, "could not allocate urb\n"); |
| 954 | return -ENOMEM; |
| 955 | } |
| 956 | cmd->buf_tx = usb_alloc_coherent(ar->dev, AR5523_MAX_TXCMDSZ, |
| 957 | GFP_KERNEL, |
| 958 | &cmd->urb_tx->transfer_dma); |
| 959 | if (!cmd->buf_tx) { |
| 960 | usb_free_urb(cmd->urb_tx); |
| 961 | return -ENOMEM; |
| 962 | } |
| 963 | return 0; |
| 964 | } |
| 965 | |
| 966 | /* |
| 967 | * This function is called periodically (every second) when associated to |
| 968 | * query device statistics. |
| 969 | */ |
| 970 | static void ar5523_stat_work(struct work_struct *work) |
| 971 | { |
| 972 | struct ar5523 *ar = container_of(work, struct ar5523, stat_work.work); |
| 973 | int error; |
| 974 | |
| 975 | ar5523_dbg(ar, "%s\n", __func__); |
| 976 | mutex_lock(&ar->mutex); |
| 977 | |
| 978 | /* |
| 979 | * Send request for statistics asynchronously once a second. This |
| 980 | * seems to be important. Throughput is a lot better if this is done. |
| 981 | */ |
| 982 | error = ar5523_cmd_write(ar, WDCMSG_TARGET_GET_STATS, NULL, 0, 0); |
| 983 | if (error) |
| 984 | ar5523_err(ar, "could not query stats, error %d\n", error); |
| 985 | mutex_unlock(&ar->mutex); |
| 986 | ieee80211_queue_delayed_work(ar->hw, &ar->stat_work, HZ); |
| 987 | } |
| 988 | |
| 989 | /* |
| 990 | * Interface routines to the mac80211 stack. |
| 991 | */ |
| 992 | static int ar5523_start(struct ieee80211_hw *hw) |
| 993 | { |
| 994 | struct ar5523 *ar = hw->priv; |
| 995 | int error; |
| 996 | __be32 val; |
| 997 | |
| 998 | ar5523_dbg(ar, "start called\n"); |
| 999 | |
| 1000 | mutex_lock(&ar->mutex); |
| 1001 | val = cpu_to_be32(0); |
| 1002 | ar5523_cmd_write(ar, WDCMSG_BIND, &val, sizeof(val), 0); |
| 1003 | |
| 1004 | /* set MAC address */ |
| 1005 | ar5523_config_multi(ar, CFG_MAC_ADDR, &ar->hw->wiphy->perm_addr, |
| 1006 | ETH_ALEN); |
| 1007 | |
| 1008 | /* XXX honor net80211 state */ |
| 1009 | ar5523_config(ar, CFG_RATE_CONTROL_ENABLE, 0x00000001); |
| 1010 | ar5523_config(ar, CFG_DIVERSITY_CTL, 0x00000001); |
| 1011 | ar5523_config(ar, CFG_ABOLT, 0x0000003f); |
| 1012 | ar5523_config(ar, CFG_WME_ENABLED, 0x00000000); |
| 1013 | |
| 1014 | ar5523_config(ar, CFG_SERVICE_TYPE, 1); |
| 1015 | ar5523_config(ar, CFG_TP_SCALE, 0x00000000); |
| 1016 | ar5523_config(ar, CFG_TPC_HALF_DBM5, 0x0000003c); |
| 1017 | ar5523_config(ar, CFG_TPC_HALF_DBM2, 0x0000003c); |
| 1018 | ar5523_config(ar, CFG_OVERRD_TX_POWER, 0x00000000); |
| 1019 | ar5523_config(ar, CFG_GMODE_PROTECTION, 0x00000000); |
| 1020 | ar5523_config(ar, CFG_GMODE_PROTECT_RATE_INDEX, 0x00000003); |
| 1021 | ar5523_config(ar, CFG_PROTECTION_TYPE, 0x00000000); |
| 1022 | ar5523_config(ar, CFG_MODE_CTS, 0x00000002); |
| 1023 | |
| 1024 | error = ar5523_cmd_read(ar, WDCMSG_TARGET_START, NULL, 0, |
| 1025 | &val, sizeof(val), AR5523_CMD_FLAG_MAGIC); |
| 1026 | if (error) { |
| 1027 | ar5523_dbg(ar, "could not start target, error %d\n", error); |
| 1028 | goto err; |
| 1029 | } |
| 1030 | ar5523_dbg(ar, "WDCMSG_TARGET_START returns handle: 0x%x\n", |
| 1031 | be32_to_cpu(val)); |
| 1032 | |
| 1033 | ar5523_switch_chan(ar); |
| 1034 | |
| 1035 | val = cpu_to_be32(TARGET_DEVICE_AWAKE); |
| 1036 | ar5523_cmd_write(ar, WDCMSG_SET_PWR_MODE, &val, sizeof(val), 0); |
| 1037 | /* XXX? check */ |
| 1038 | ar5523_cmd_write(ar, WDCMSG_RESET_KEY_CACHE, NULL, 0, 0); |
| 1039 | |
| 1040 | set_bit(AR5523_HW_UP, &ar->flags); |
| 1041 | queue_work(ar->wq, &ar->rx_refill_work); |
| 1042 | |
| 1043 | /* enable Rx */ |
| 1044 | ar5523_set_rxfilter(ar, 0, UATH_FILTER_OP_INIT); |
| 1045 | ar5523_set_rxfilter(ar, |
| 1046 | UATH_FILTER_RX_UCAST | UATH_FILTER_RX_MCAST | |
| 1047 | UATH_FILTER_RX_BCAST | UATH_FILTER_RX_BEACON, |
| 1048 | UATH_FILTER_OP_SET); |
| 1049 | |
| 1050 | ar5523_set_ledsteady(ar, UATH_LED_ACTIVITY, UATH_LED_ON); |
| 1051 | ar5523_dbg(ar, "start OK\n"); |
| 1052 | |
| 1053 | err: |
| 1054 | mutex_unlock(&ar->mutex); |
| 1055 | return error; |
| 1056 | } |
| 1057 | |
| 1058 | static void ar5523_stop(struct ieee80211_hw *hw) |
| 1059 | { |
| 1060 | struct ar5523 *ar = hw->priv; |
| 1061 | |
| 1062 | ar5523_dbg(ar, "stop called\n"); |
| 1063 | |
| 1064 | cancel_delayed_work_sync(&ar->stat_work); |
| 1065 | mutex_lock(&ar->mutex); |
| 1066 | clear_bit(AR5523_HW_UP, &ar->flags); |
| 1067 | |
| 1068 | ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_OFF); |
| 1069 | ar5523_set_ledsteady(ar, UATH_LED_ACTIVITY, UATH_LED_OFF); |
| 1070 | |
| 1071 | ar5523_cmd_write(ar, WDCMSG_TARGET_STOP, NULL, 0, 0); |
| 1072 | |
| 1073 | del_timer_sync(&ar->tx_wd_timer); |
| 1074 | cancel_work_sync(&ar->tx_wd_work); |
| 1075 | cancel_work_sync(&ar->rx_refill_work); |
| 1076 | ar5523_cancel_rx_bufs(ar); |
| 1077 | mutex_unlock(&ar->mutex); |
| 1078 | } |
| 1079 | |
| 1080 | static int ar5523_set_rts_threshold(struct ieee80211_hw *hw, u32 value) |
| 1081 | { |
| 1082 | struct ar5523 *ar = hw->priv; |
| 1083 | int ret; |
| 1084 | |
| 1085 | ar5523_dbg(ar, "set_rts_threshold called\n"); |
| 1086 | mutex_lock(&ar->mutex); |
| 1087 | |
| 1088 | ret = ar5523_config(ar, CFG_USER_RTS_THRESHOLD, value); |
| 1089 | |
| 1090 | mutex_unlock(&ar->mutex); |
| 1091 | return ret; |
| 1092 | } |
| 1093 | |
Emmanuel Grumbach | 77be2c5 | 2014-03-27 11:30:29 +0200 | [diff] [blame] | 1094 | static void ar5523_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| 1095 | u32 queues, bool drop) |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1096 | { |
| 1097 | struct ar5523 *ar = hw->priv; |
| 1098 | |
| 1099 | ar5523_dbg(ar, "flush called\n"); |
| 1100 | ar5523_flush_tx(ar); |
| 1101 | } |
| 1102 | |
| 1103 | static int ar5523_add_interface(struct ieee80211_hw *hw, |
| 1104 | struct ieee80211_vif *vif) |
| 1105 | { |
| 1106 | struct ar5523 *ar = hw->priv; |
| 1107 | |
| 1108 | ar5523_dbg(ar, "add interface called\n"); |
| 1109 | |
| 1110 | if (ar->vif) { |
| 1111 | ar5523_dbg(ar, "invalid add_interface\n"); |
| 1112 | return -EOPNOTSUPP; |
| 1113 | } |
| 1114 | |
| 1115 | switch (vif->type) { |
| 1116 | case NL80211_IFTYPE_STATION: |
| 1117 | ar->vif = vif; |
| 1118 | break; |
| 1119 | default: |
| 1120 | return -EOPNOTSUPP; |
| 1121 | } |
| 1122 | return 0; |
| 1123 | } |
| 1124 | |
| 1125 | static void ar5523_remove_interface(struct ieee80211_hw *hw, |
| 1126 | struct ieee80211_vif *vif) |
| 1127 | { |
| 1128 | struct ar5523 *ar = hw->priv; |
| 1129 | |
| 1130 | ar5523_dbg(ar, "remove interface called\n"); |
| 1131 | ar->vif = NULL; |
| 1132 | } |
| 1133 | |
| 1134 | static int ar5523_hwconfig(struct ieee80211_hw *hw, u32 changed) |
| 1135 | { |
| 1136 | struct ar5523 *ar = hw->priv; |
| 1137 | |
| 1138 | ar5523_dbg(ar, "config called\n"); |
| 1139 | mutex_lock(&ar->mutex); |
| 1140 | if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { |
| 1141 | ar5523_dbg(ar, "Do channel switch\n"); |
| 1142 | ar5523_flush_tx(ar); |
| 1143 | ar5523_switch_chan(ar); |
| 1144 | } |
| 1145 | mutex_unlock(&ar->mutex); |
| 1146 | return 0; |
| 1147 | } |
| 1148 | |
| 1149 | static int ar5523_get_wlan_mode(struct ar5523 *ar, |
| 1150 | struct ieee80211_bss_conf *bss_conf) |
| 1151 | { |
| 1152 | struct ieee80211_supported_band *band; |
| 1153 | int bit; |
| 1154 | struct ieee80211_sta *sta; |
| 1155 | u32 sta_rate_set; |
| 1156 | |
Karl Beldan | 675a0b0 | 2013-03-25 16:26:57 +0100 | [diff] [blame] | 1157 | band = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band]; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1158 | sta = ieee80211_find_sta(ar->vif, bss_conf->bssid); |
| 1159 | if (!sta) { |
| 1160 | ar5523_info(ar, "STA not found!\n"); |
| 1161 | return WLAN_MODE_11b; |
| 1162 | } |
Karl Beldan | 675a0b0 | 2013-03-25 16:26:57 +0100 | [diff] [blame] | 1163 | sta_rate_set = sta->supp_rates[ar->hw->conf.chandef.chan->band]; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1164 | |
| 1165 | for (bit = 0; bit < band->n_bitrates; bit++) { |
| 1166 | if (sta_rate_set & 1) { |
| 1167 | int rate = band->bitrates[bit].bitrate; |
| 1168 | switch (rate) { |
| 1169 | case 60: |
| 1170 | case 90: |
| 1171 | case 120: |
| 1172 | case 180: |
| 1173 | case 240: |
| 1174 | case 360: |
| 1175 | case 480: |
| 1176 | case 540: |
| 1177 | return WLAN_MODE_11g; |
| 1178 | } |
| 1179 | } |
| 1180 | sta_rate_set >>= 1; |
| 1181 | } |
| 1182 | return WLAN_MODE_11b; |
| 1183 | } |
| 1184 | |
| 1185 | static void ar5523_create_rateset(struct ar5523 *ar, |
| 1186 | struct ieee80211_bss_conf *bss_conf, |
| 1187 | struct ar5523_cmd_rateset *rs, |
| 1188 | bool basic) |
| 1189 | { |
| 1190 | struct ieee80211_supported_band *band; |
| 1191 | struct ieee80211_sta *sta; |
| 1192 | int bit, i = 0; |
| 1193 | u32 sta_rate_set, basic_rate_set; |
| 1194 | |
| 1195 | sta = ieee80211_find_sta(ar->vif, bss_conf->bssid); |
| 1196 | basic_rate_set = bss_conf->basic_rates; |
| 1197 | if (!sta) { |
| 1198 | ar5523_info(ar, "STA not found. Cannot set rates\n"); |
| 1199 | sta_rate_set = bss_conf->basic_rates; |
Pontus Fuchs | 9ee01b3 | 2012-11-05 21:17:51 +0100 | [diff] [blame] | 1200 | } else |
Karl Beldan | 675a0b0 | 2013-03-25 16:26:57 +0100 | [diff] [blame] | 1201 | sta_rate_set = sta->supp_rates[ar->hw->conf.chandef.chan->band]; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1202 | |
| 1203 | ar5523_dbg(ar, "sta rate_set = %08x\n", sta_rate_set); |
| 1204 | |
Karl Beldan | 675a0b0 | 2013-03-25 16:26:57 +0100 | [diff] [blame] | 1205 | band = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band]; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1206 | for (bit = 0; bit < band->n_bitrates; bit++) { |
| 1207 | BUG_ON(i >= AR5523_MAX_NRATES); |
| 1208 | ar5523_dbg(ar, "Considering rate %d : %d\n", |
| 1209 | band->bitrates[bit].hw_value, sta_rate_set & 1); |
| 1210 | if (sta_rate_set & 1) { |
| 1211 | rs->set[i] = band->bitrates[bit].hw_value; |
| 1212 | if (basic_rate_set & 1 && basic) |
| 1213 | rs->set[i] |= 0x80; |
| 1214 | i++; |
| 1215 | } |
| 1216 | sta_rate_set >>= 1; |
| 1217 | basic_rate_set >>= 1; |
| 1218 | } |
| 1219 | |
| 1220 | rs->length = i; |
| 1221 | } |
| 1222 | |
| 1223 | static int ar5523_set_basic_rates(struct ar5523 *ar, |
| 1224 | struct ieee80211_bss_conf *bss) |
| 1225 | { |
| 1226 | struct ar5523_cmd_rates rates; |
| 1227 | |
| 1228 | memset(&rates, 0, sizeof(rates)); |
| 1229 | rates.connid = cpu_to_be32(2); /* XXX */ |
| 1230 | rates.size = cpu_to_be32(sizeof(struct ar5523_cmd_rateset)); |
| 1231 | ar5523_create_rateset(ar, bss, &rates.rateset, true); |
| 1232 | |
| 1233 | return ar5523_cmd_write(ar, WDCMSG_SET_BASIC_RATE, &rates, |
| 1234 | sizeof(rates), 0); |
| 1235 | } |
| 1236 | |
| 1237 | static int ar5523_create_connection(struct ar5523 *ar, |
| 1238 | struct ieee80211_vif *vif, |
| 1239 | struct ieee80211_bss_conf *bss) |
| 1240 | { |
| 1241 | struct ar5523_cmd_create_connection create; |
| 1242 | int wlan_mode; |
| 1243 | |
| 1244 | memset(&create, 0, sizeof(create)); |
| 1245 | create.connid = cpu_to_be32(2); |
| 1246 | create.bssid = cpu_to_be32(0); |
| 1247 | /* XXX packed or not? */ |
| 1248 | create.size = cpu_to_be32(sizeof(struct ar5523_cmd_rateset)); |
| 1249 | |
| 1250 | ar5523_create_rateset(ar, bss, &create.connattr.rateset, false); |
| 1251 | |
| 1252 | wlan_mode = ar5523_get_wlan_mode(ar, bss); |
| 1253 | create.connattr.wlanmode = cpu_to_be32(wlan_mode); |
| 1254 | |
| 1255 | return ar5523_cmd_write(ar, WDCMSG_CREATE_CONNECTION, &create, |
| 1256 | sizeof(create), 0); |
| 1257 | } |
| 1258 | |
| 1259 | static int ar5523_write_associd(struct ar5523 *ar, |
| 1260 | struct ieee80211_bss_conf *bss) |
| 1261 | { |
| 1262 | struct ar5523_cmd_set_associd associd; |
| 1263 | |
| 1264 | memset(&associd, 0, sizeof(associd)); |
| 1265 | associd.defaultrateix = cpu_to_be32(0); /* XXX */ |
| 1266 | associd.associd = cpu_to_be32(bss->aid); |
| 1267 | associd.timoffset = cpu_to_be32(0x3b); /* XXX */ |
| 1268 | memcpy(associd.bssid, bss->bssid, ETH_ALEN); |
| 1269 | return ar5523_cmd_write(ar, WDCMSG_WRITE_ASSOCID, &associd, |
| 1270 | sizeof(associd), 0); |
| 1271 | } |
| 1272 | |
| 1273 | static void ar5523_bss_info_changed(struct ieee80211_hw *hw, |
| 1274 | struct ieee80211_vif *vif, |
| 1275 | struct ieee80211_bss_conf *bss, |
| 1276 | u32 changed) |
| 1277 | { |
| 1278 | struct ar5523 *ar = hw->priv; |
| 1279 | int error; |
| 1280 | |
| 1281 | ar5523_dbg(ar, "bss_info_changed called\n"); |
| 1282 | mutex_lock(&ar->mutex); |
| 1283 | |
| 1284 | if (!(changed & BSS_CHANGED_ASSOC)) |
| 1285 | goto out_unlock; |
| 1286 | |
| 1287 | if (bss->assoc) { |
| 1288 | error = ar5523_create_connection(ar, vif, bss); |
| 1289 | if (error) { |
| 1290 | ar5523_err(ar, "could not create connection\n"); |
| 1291 | goto out_unlock; |
| 1292 | } |
| 1293 | |
| 1294 | error = ar5523_set_basic_rates(ar, bss); |
| 1295 | if (error) { |
| 1296 | ar5523_err(ar, "could not set negotiated rate set\n"); |
| 1297 | goto out_unlock; |
| 1298 | } |
| 1299 | |
| 1300 | error = ar5523_write_associd(ar, bss); |
| 1301 | if (error) { |
| 1302 | ar5523_err(ar, "could not set association\n"); |
| 1303 | goto out_unlock; |
| 1304 | } |
| 1305 | |
| 1306 | /* turn link LED on */ |
| 1307 | ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_ON); |
| 1308 | set_bit(AR5523_CONNECTED, &ar->flags); |
| 1309 | ieee80211_queue_delayed_work(hw, &ar->stat_work, HZ); |
| 1310 | |
| 1311 | } else { |
| 1312 | cancel_delayed_work(&ar->stat_work); |
| 1313 | clear_bit(AR5523_CONNECTED, &ar->flags); |
| 1314 | ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_OFF); |
| 1315 | } |
| 1316 | |
| 1317 | out_unlock: |
| 1318 | mutex_unlock(&ar->mutex); |
| 1319 | |
| 1320 | } |
| 1321 | |
Johannes Berg | df14046 | 2015-04-22 14:40:58 +0200 | [diff] [blame] | 1322 | #define AR5523_SUPPORTED_FILTERS (FIF_ALLMULTI | \ |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1323 | FIF_FCSFAIL | \ |
| 1324 | FIF_OTHER_BSS) |
| 1325 | |
| 1326 | static void ar5523_configure_filter(struct ieee80211_hw *hw, |
| 1327 | unsigned int changed_flags, |
| 1328 | unsigned int *total_flags, |
| 1329 | u64 multicast) |
| 1330 | { |
| 1331 | struct ar5523 *ar = hw->priv; |
| 1332 | u32 filter = 0; |
| 1333 | |
| 1334 | ar5523_dbg(ar, "configure_filter called\n"); |
| 1335 | mutex_lock(&ar->mutex); |
| 1336 | ar5523_flush_tx(ar); |
| 1337 | |
| 1338 | *total_flags &= AR5523_SUPPORTED_FILTERS; |
| 1339 | |
| 1340 | /* The filters seems strange. UATH_FILTER_RX_BCAST and |
| 1341 | * UATH_FILTER_RX_MCAST does not result in those frames being RXed. |
| 1342 | * The only way I have found to get [mb]cast frames seems to be |
| 1343 | * to set UATH_FILTER_RX_PROM. */ |
| 1344 | filter |= UATH_FILTER_RX_UCAST | UATH_FILTER_RX_MCAST | |
| 1345 | UATH_FILTER_RX_BCAST | UATH_FILTER_RX_BEACON | |
| 1346 | UATH_FILTER_RX_PROM; |
| 1347 | |
| 1348 | ar5523_set_rxfilter(ar, 0, UATH_FILTER_OP_INIT); |
| 1349 | ar5523_set_rxfilter(ar, filter, UATH_FILTER_OP_SET); |
| 1350 | |
| 1351 | mutex_unlock(&ar->mutex); |
| 1352 | } |
| 1353 | |
| 1354 | static const struct ieee80211_ops ar5523_ops = { |
| 1355 | .start = ar5523_start, |
| 1356 | .stop = ar5523_stop, |
| 1357 | .tx = ar5523_tx, |
| 1358 | .set_rts_threshold = ar5523_set_rts_threshold, |
| 1359 | .add_interface = ar5523_add_interface, |
| 1360 | .remove_interface = ar5523_remove_interface, |
| 1361 | .config = ar5523_hwconfig, |
| 1362 | .bss_info_changed = ar5523_bss_info_changed, |
| 1363 | .configure_filter = ar5523_configure_filter, |
| 1364 | .flush = ar5523_flush, |
| 1365 | }; |
| 1366 | |
| 1367 | static int ar5523_host_available(struct ar5523 *ar) |
| 1368 | { |
| 1369 | struct ar5523_cmd_host_available setup; |
| 1370 | |
| 1371 | /* inform target the host is available */ |
| 1372 | setup.sw_ver_major = cpu_to_be32(ATH_SW_VER_MAJOR); |
| 1373 | setup.sw_ver_minor = cpu_to_be32(ATH_SW_VER_MINOR); |
| 1374 | setup.sw_ver_patch = cpu_to_be32(ATH_SW_VER_PATCH); |
| 1375 | setup.sw_ver_build = cpu_to_be32(ATH_SW_VER_BUILD); |
| 1376 | return ar5523_cmd_read(ar, WDCMSG_HOST_AVAILABLE, |
| 1377 | &setup, sizeof(setup), NULL, 0, 0); |
| 1378 | } |
| 1379 | |
| 1380 | static int ar5523_get_devstatus(struct ar5523 *ar) |
| 1381 | { |
| 1382 | u8 macaddr[ETH_ALEN]; |
| 1383 | int error; |
| 1384 | |
| 1385 | /* retrieve MAC address */ |
| 1386 | error = ar5523_get_status(ar, ST_MAC_ADDR, macaddr, ETH_ALEN); |
| 1387 | if (error) { |
| 1388 | ar5523_err(ar, "could not read MAC address\n"); |
| 1389 | return error; |
| 1390 | } |
| 1391 | |
| 1392 | SET_IEEE80211_PERM_ADDR(ar->hw, macaddr); |
| 1393 | |
| 1394 | error = ar5523_get_status(ar, ST_SERIAL_NUMBER, |
| 1395 | &ar->serial[0], sizeof(ar->serial)); |
| 1396 | if (error) { |
| 1397 | ar5523_err(ar, "could not read device serial number\n"); |
| 1398 | return error; |
| 1399 | } |
| 1400 | return 0; |
| 1401 | } |
| 1402 | |
| 1403 | #define AR5523_SANE_RXBUFSZ 2000 |
| 1404 | |
| 1405 | static int ar5523_get_max_rxsz(struct ar5523 *ar) |
| 1406 | { |
| 1407 | int error; |
| 1408 | __be32 rxsize; |
| 1409 | |
| 1410 | /* Get max rx size */ |
| 1411 | error = ar5523_get_status(ar, ST_WDC_TRANSPORT_CHUNK_SIZE, &rxsize, |
| 1412 | sizeof(rxsize)); |
| 1413 | if (error != 0) { |
| 1414 | ar5523_err(ar, "could not read max RX size\n"); |
| 1415 | return error; |
| 1416 | } |
| 1417 | |
| 1418 | ar->rxbufsz = be32_to_cpu(rxsize); |
| 1419 | |
| 1420 | if (!ar->rxbufsz || ar->rxbufsz > AR5523_SANE_RXBUFSZ) { |
| 1421 | ar5523_err(ar, "Bad rxbufsz from device. Using %d instead\n", |
| 1422 | AR5523_SANE_RXBUFSZ); |
| 1423 | ar->rxbufsz = AR5523_SANE_RXBUFSZ; |
| 1424 | } |
| 1425 | |
| 1426 | ar5523_dbg(ar, "Max RX buf size: %d\n", ar->rxbufsz); |
| 1427 | return 0; |
| 1428 | } |
| 1429 | |
| 1430 | /* |
| 1431 | * This is copied from rtl818x, but we should probably move this |
| 1432 | * to common code as in OpenBSD. |
| 1433 | */ |
| 1434 | static const struct ieee80211_rate ar5523_rates[] = { |
| 1435 | { .bitrate = 10, .hw_value = 2, }, |
| 1436 | { .bitrate = 20, .hw_value = 4 }, |
| 1437 | { .bitrate = 55, .hw_value = 11, }, |
| 1438 | { .bitrate = 110, .hw_value = 22, }, |
| 1439 | { .bitrate = 60, .hw_value = 12, }, |
| 1440 | { .bitrate = 90, .hw_value = 18, }, |
| 1441 | { .bitrate = 120, .hw_value = 24, }, |
| 1442 | { .bitrate = 180, .hw_value = 36, }, |
| 1443 | { .bitrate = 240, .hw_value = 48, }, |
| 1444 | { .bitrate = 360, .hw_value = 72, }, |
| 1445 | { .bitrate = 480, .hw_value = 96, }, |
| 1446 | { .bitrate = 540, .hw_value = 108, }, |
| 1447 | }; |
| 1448 | |
| 1449 | static const struct ieee80211_channel ar5523_channels[] = { |
| 1450 | { .center_freq = 2412 }, |
| 1451 | { .center_freq = 2417 }, |
| 1452 | { .center_freq = 2422 }, |
| 1453 | { .center_freq = 2427 }, |
| 1454 | { .center_freq = 2432 }, |
| 1455 | { .center_freq = 2437 }, |
| 1456 | { .center_freq = 2442 }, |
| 1457 | { .center_freq = 2447 }, |
| 1458 | { .center_freq = 2452 }, |
| 1459 | { .center_freq = 2457 }, |
| 1460 | { .center_freq = 2462 }, |
| 1461 | { .center_freq = 2467 }, |
| 1462 | { .center_freq = 2472 }, |
| 1463 | { .center_freq = 2484 }, |
| 1464 | }; |
| 1465 | |
| 1466 | static int ar5523_init_modes(struct ar5523 *ar) |
| 1467 | { |
| 1468 | BUILD_BUG_ON(sizeof(ar->channels) != sizeof(ar5523_channels)); |
| 1469 | BUILD_BUG_ON(sizeof(ar->rates) != sizeof(ar5523_rates)); |
| 1470 | |
| 1471 | memcpy(ar->channels, ar5523_channels, sizeof(ar5523_channels)); |
| 1472 | memcpy(ar->rates, ar5523_rates, sizeof(ar5523_rates)); |
| 1473 | |
Johannes Berg | 57fbcce | 2016-04-12 15:56:15 +0200 | [diff] [blame^] | 1474 | ar->band.band = NL80211_BAND_2GHZ; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1475 | ar->band.channels = ar->channels; |
| 1476 | ar->band.n_channels = ARRAY_SIZE(ar5523_channels); |
| 1477 | ar->band.bitrates = ar->rates; |
| 1478 | ar->band.n_bitrates = ARRAY_SIZE(ar5523_rates); |
Johannes Berg | 57fbcce | 2016-04-12 15:56:15 +0200 | [diff] [blame^] | 1479 | ar->hw->wiphy->bands[NL80211_BAND_2GHZ] = &ar->band; |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1480 | return 0; |
| 1481 | } |
| 1482 | |
| 1483 | /* |
| 1484 | * Load the MIPS R4000 microcode into the device. Once the image is loaded, |
| 1485 | * the device will detach itself from the bus and reattach later with a new |
| 1486 | * product Id (a la ezusb). |
| 1487 | */ |
| 1488 | static int ar5523_load_firmware(struct usb_device *dev) |
| 1489 | { |
| 1490 | struct ar5523_fwblock *txblock, *rxblock; |
| 1491 | const struct firmware *fw; |
| 1492 | void *fwbuf; |
| 1493 | int len, offset; |
| 1494 | int foolen; /* XXX(hch): handle short transfers */ |
| 1495 | int error = -ENXIO; |
| 1496 | |
| 1497 | if (request_firmware(&fw, AR5523_FIRMWARE_FILE, &dev->dev)) { |
| 1498 | dev_err(&dev->dev, "no firmware found: %s\n", |
| 1499 | AR5523_FIRMWARE_FILE); |
| 1500 | return -ENOENT; |
| 1501 | } |
| 1502 | |
| 1503 | txblock = kmalloc(sizeof(*txblock), GFP_KERNEL); |
| 1504 | if (!txblock) |
| 1505 | goto out; |
| 1506 | |
| 1507 | rxblock = kmalloc(sizeof(*rxblock), GFP_KERNEL); |
| 1508 | if (!rxblock) |
| 1509 | goto out_free_txblock; |
| 1510 | |
| 1511 | fwbuf = kmalloc(AR5523_MAX_FWBLOCK_SIZE, GFP_KERNEL); |
| 1512 | if (!fwbuf) |
| 1513 | goto out_free_rxblock; |
| 1514 | |
| 1515 | memset(txblock, 0, sizeof(struct ar5523_fwblock)); |
| 1516 | txblock->flags = cpu_to_be32(AR5523_WRITE_BLOCK); |
| 1517 | txblock->total = cpu_to_be32(fw->size); |
| 1518 | |
| 1519 | offset = 0; |
| 1520 | len = fw->size; |
| 1521 | while (len > 0) { |
| 1522 | int mlen = min(len, AR5523_MAX_FWBLOCK_SIZE); |
| 1523 | |
| 1524 | txblock->remain = cpu_to_be32(len - mlen); |
| 1525 | txblock->len = cpu_to_be32(mlen); |
| 1526 | |
| 1527 | /* send firmware block meta-data */ |
| 1528 | error = usb_bulk_msg(dev, ar5523_cmd_tx_pipe(dev), |
| 1529 | txblock, sizeof(*txblock), &foolen, |
| 1530 | AR5523_CMD_TIMEOUT); |
| 1531 | if (error) { |
| 1532 | dev_err(&dev->dev, |
| 1533 | "could not send firmware block info\n"); |
| 1534 | goto out_free_fwbuf; |
| 1535 | } |
| 1536 | |
| 1537 | /* send firmware block data */ |
| 1538 | memcpy(fwbuf, fw->data + offset, mlen); |
| 1539 | error = usb_bulk_msg(dev, ar5523_data_tx_pipe(dev), |
| 1540 | fwbuf, mlen, &foolen, |
| 1541 | AR5523_DATA_TIMEOUT); |
| 1542 | if (error) { |
| 1543 | dev_err(&dev->dev, |
| 1544 | "could not send firmware block data\n"); |
| 1545 | goto out_free_fwbuf; |
| 1546 | } |
| 1547 | |
| 1548 | /* wait for ack from firmware */ |
| 1549 | error = usb_bulk_msg(dev, ar5523_cmd_rx_pipe(dev), |
| 1550 | rxblock, sizeof(*rxblock), &foolen, |
| 1551 | AR5523_CMD_TIMEOUT); |
| 1552 | if (error) { |
| 1553 | dev_err(&dev->dev, |
| 1554 | "could not read firmware answer\n"); |
| 1555 | goto out_free_fwbuf; |
| 1556 | } |
| 1557 | |
| 1558 | len -= mlen; |
| 1559 | offset += mlen; |
| 1560 | } |
| 1561 | |
| 1562 | /* |
| 1563 | * Set the error to -ENXIO to make sure we continue probing for |
| 1564 | * a driver. |
| 1565 | */ |
| 1566 | error = -ENXIO; |
| 1567 | |
| 1568 | out_free_fwbuf: |
| 1569 | kfree(fwbuf); |
| 1570 | out_free_rxblock: |
| 1571 | kfree(rxblock); |
| 1572 | out_free_txblock: |
| 1573 | kfree(txblock); |
| 1574 | out: |
| 1575 | release_firmware(fw); |
| 1576 | return error; |
| 1577 | } |
| 1578 | |
| 1579 | static int ar5523_probe(struct usb_interface *intf, |
| 1580 | const struct usb_device_id *id) |
| 1581 | { |
| 1582 | struct usb_device *dev = interface_to_usbdev(intf); |
| 1583 | struct ieee80211_hw *hw; |
| 1584 | struct ar5523 *ar; |
| 1585 | int error = -ENOMEM; |
| 1586 | |
| 1587 | /* |
| 1588 | * Load firmware if the device requires it. This will return |
| 1589 | * -ENXIO on success and we'll get called back afer the usb |
| 1590 | * id changes to indicate that the firmware is present. |
| 1591 | */ |
| 1592 | if (id->driver_info & AR5523_FLAG_PRE_FIRMWARE) |
| 1593 | return ar5523_load_firmware(dev); |
| 1594 | |
| 1595 | |
| 1596 | hw = ieee80211_alloc_hw(sizeof(*ar), &ar5523_ops); |
| 1597 | if (!hw) |
| 1598 | goto out; |
| 1599 | SET_IEEE80211_DEV(hw, &intf->dev); |
| 1600 | |
| 1601 | ar = hw->priv; |
| 1602 | ar->hw = hw; |
| 1603 | ar->dev = dev; |
| 1604 | mutex_init(&ar->mutex); |
| 1605 | |
| 1606 | INIT_DELAYED_WORK(&ar->stat_work, ar5523_stat_work); |
| 1607 | init_timer(&ar->tx_wd_timer); |
| 1608 | setup_timer(&ar->tx_wd_timer, ar5523_tx_wd_timer, (unsigned long) ar); |
| 1609 | INIT_WORK(&ar->tx_wd_work, ar5523_tx_wd_work); |
| 1610 | INIT_WORK(&ar->tx_work, ar5523_tx_work); |
| 1611 | INIT_LIST_HEAD(&ar->tx_queue_pending); |
| 1612 | INIT_LIST_HEAD(&ar->tx_queue_submitted); |
| 1613 | spin_lock_init(&ar->tx_data_list_lock); |
| 1614 | atomic_set(&ar->tx_nr_total, 0); |
| 1615 | atomic_set(&ar->tx_nr_pending, 0); |
| 1616 | init_waitqueue_head(&ar->tx_flush_waitq); |
| 1617 | |
| 1618 | atomic_set(&ar->rx_data_free_cnt, 0); |
| 1619 | INIT_WORK(&ar->rx_refill_work, ar5523_rx_refill_work); |
| 1620 | INIT_LIST_HEAD(&ar->rx_data_free); |
| 1621 | INIT_LIST_HEAD(&ar->rx_data_used); |
| 1622 | spin_lock_init(&ar->rx_data_list_lock); |
| 1623 | |
| 1624 | ar->wq = create_singlethread_workqueue("ar5523"); |
| 1625 | if (!ar->wq) { |
| 1626 | ar5523_err(ar, "Could not create wq\n"); |
| 1627 | goto out_free_ar; |
| 1628 | } |
| 1629 | |
| 1630 | error = ar5523_alloc_rx_bufs(ar); |
| 1631 | if (error) { |
| 1632 | ar5523_err(ar, "Could not allocate rx buffers\n"); |
| 1633 | goto out_free_wq; |
| 1634 | } |
| 1635 | |
| 1636 | error = ar5523_alloc_rx_cmd(ar); |
| 1637 | if (error) { |
| 1638 | ar5523_err(ar, "Could not allocate rx command buffers\n"); |
| 1639 | goto out_free_rx_bufs; |
| 1640 | } |
| 1641 | |
| 1642 | error = ar5523_alloc_tx_cmd(ar); |
| 1643 | if (error) { |
| 1644 | ar5523_err(ar, "Could not allocate tx command buffers\n"); |
| 1645 | goto out_free_rx_cmd; |
| 1646 | } |
| 1647 | |
| 1648 | error = ar5523_submit_rx_cmd(ar); |
| 1649 | if (error) { |
| 1650 | ar5523_err(ar, "Failed to submit rx cmd\n"); |
| 1651 | goto out_free_tx_cmd; |
| 1652 | } |
| 1653 | |
| 1654 | /* |
| 1655 | * We're now ready to send/receive firmware commands. |
| 1656 | */ |
| 1657 | error = ar5523_host_available(ar); |
| 1658 | if (error) { |
| 1659 | ar5523_err(ar, "could not initialize adapter\n"); |
| 1660 | goto out_cancel_rx_cmd; |
| 1661 | } |
| 1662 | |
| 1663 | error = ar5523_get_max_rxsz(ar); |
| 1664 | if (error) { |
| 1665 | ar5523_err(ar, "could not get caps from adapter\n"); |
| 1666 | goto out_cancel_rx_cmd; |
| 1667 | } |
| 1668 | |
| 1669 | error = ar5523_get_devcap(ar); |
| 1670 | if (error) { |
| 1671 | ar5523_err(ar, "could not get caps from adapter\n"); |
| 1672 | goto out_cancel_rx_cmd; |
| 1673 | } |
| 1674 | |
| 1675 | error = ar5523_get_devstatus(ar); |
| 1676 | if (error != 0) { |
| 1677 | ar5523_err(ar, "could not get device status\n"); |
| 1678 | goto out_cancel_rx_cmd; |
| 1679 | } |
| 1680 | |
| 1681 | ar5523_info(ar, "MAC/BBP AR5523, RF AR%c112\n", |
| 1682 | (id->driver_info & AR5523_FLAG_ABG) ? '5' : '2'); |
| 1683 | |
| 1684 | ar->vif = NULL; |
Johannes Berg | 30686bf | 2015-06-02 21:39:54 +0200 | [diff] [blame] | 1685 | ieee80211_hw_set(hw, HAS_RATE_CONTROL); |
| 1686 | ieee80211_hw_set(hw, RX_INCLUDES_FCS); |
| 1687 | ieee80211_hw_set(hw, SIGNAL_DBM); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1688 | hw->extra_tx_headroom = sizeof(struct ar5523_tx_desc) + |
| 1689 | sizeof(struct ar5523_chunk); |
| 1690 | hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); |
| 1691 | hw->queues = 1; |
| 1692 | |
| 1693 | error = ar5523_init_modes(ar); |
| 1694 | if (error) |
| 1695 | goto out_cancel_rx_cmd; |
| 1696 | |
| 1697 | usb_set_intfdata(intf, hw); |
| 1698 | |
| 1699 | error = ieee80211_register_hw(hw); |
| 1700 | if (error) { |
| 1701 | ar5523_err(ar, "could not register device\n"); |
| 1702 | goto out_cancel_rx_cmd; |
| 1703 | } |
| 1704 | |
| 1705 | ar5523_info(ar, "Found and initialized AR5523 device\n"); |
| 1706 | return 0; |
| 1707 | |
| 1708 | out_cancel_rx_cmd: |
| 1709 | ar5523_cancel_rx_cmd(ar); |
| 1710 | out_free_tx_cmd: |
| 1711 | ar5523_free_tx_cmd(ar); |
| 1712 | out_free_rx_cmd: |
| 1713 | ar5523_free_rx_cmd(ar); |
| 1714 | out_free_rx_bufs: |
| 1715 | ar5523_free_rx_bufs(ar); |
| 1716 | out_free_wq: |
| 1717 | destroy_workqueue(ar->wq); |
| 1718 | out_free_ar: |
| 1719 | ieee80211_free_hw(hw); |
| 1720 | out: |
| 1721 | return error; |
| 1722 | } |
| 1723 | |
| 1724 | static void ar5523_disconnect(struct usb_interface *intf) |
| 1725 | { |
| 1726 | struct ieee80211_hw *hw = usb_get_intfdata(intf); |
| 1727 | struct ar5523 *ar = hw->priv; |
| 1728 | |
| 1729 | ar5523_dbg(ar, "detaching\n"); |
| 1730 | set_bit(AR5523_USB_DISCONNECTED, &ar->flags); |
| 1731 | |
| 1732 | ieee80211_unregister_hw(hw); |
| 1733 | |
| 1734 | ar5523_cancel_rx_cmd(ar); |
| 1735 | ar5523_free_tx_cmd(ar); |
| 1736 | ar5523_free_rx_cmd(ar); |
| 1737 | ar5523_free_rx_bufs(ar); |
| 1738 | |
| 1739 | destroy_workqueue(ar->wq); |
| 1740 | |
| 1741 | ieee80211_free_hw(hw); |
| 1742 | usb_set_intfdata(intf, NULL); |
| 1743 | } |
| 1744 | |
| 1745 | #define AR5523_DEVICE_UG(vendor, device) \ |
| 1746 | { USB_DEVICE((vendor), (device)) }, \ |
| 1747 | { USB_DEVICE((vendor), (device) + 1), \ |
| 1748 | .driver_info = AR5523_FLAG_PRE_FIRMWARE } |
| 1749 | #define AR5523_DEVICE_UX(vendor, device) \ |
| 1750 | { USB_DEVICE((vendor), (device)), \ |
| 1751 | .driver_info = AR5523_FLAG_ABG }, \ |
| 1752 | { USB_DEVICE((vendor), (device) + 1), \ |
| 1753 | .driver_info = AR5523_FLAG_ABG|AR5523_FLAG_PRE_FIRMWARE } |
| 1754 | |
| 1755 | static struct usb_device_id ar5523_id_table[] = { |
| 1756 | AR5523_DEVICE_UG(0x168c, 0x0001), /* Atheros / AR5523 */ |
| 1757 | AR5523_DEVICE_UG(0x0cf3, 0x0001), /* Atheros2 / AR5523_1 */ |
| 1758 | AR5523_DEVICE_UG(0x0cf3, 0x0003), /* Atheros2 / AR5523_2 */ |
| 1759 | AR5523_DEVICE_UX(0x0cf3, 0x0005), /* Atheros2 / AR5523_3 */ |
| 1760 | AR5523_DEVICE_UG(0x0d8e, 0x7801), /* Conceptronic / AR5523_1 */ |
| 1761 | AR5523_DEVICE_UX(0x0d8e, 0x7811), /* Conceptronic / AR5523_2 */ |
| 1762 | AR5523_DEVICE_UX(0x2001, 0x3a00), /* Dlink / DWLAG132 */ |
| 1763 | AR5523_DEVICE_UG(0x2001, 0x3a02), /* Dlink / DWLG132 */ |
| 1764 | AR5523_DEVICE_UX(0x2001, 0x3a04), /* Dlink / DWLAG122 */ |
Albert Pool | 38e05a0 | 2013-09-09 20:36:30 +0200 | [diff] [blame] | 1765 | AR5523_DEVICE_UG(0x07d1, 0x3a07), /* D-Link / WUA-2340 rev A1 */ |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1766 | AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */ |
| 1767 | AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */ |
Oleksij Rempel | 4fcfc74 | 2014-02-02 10:55:18 +0100 | [diff] [blame] | 1768 | AR5523_DEVICE_UG(0x129b, 0x160b), /* Gigaset / USB stick 108 |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1769 | (CyberTAN Technology) */ |
| 1770 | AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */ |
| 1771 | AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */ |
| 1772 | AR5523_DEVICE_UG(0x0d8e, 0x7802), /* Globalsun / AR5523_3 */ |
| 1773 | AR5523_DEVICE_UX(0x0846, 0x4300), /* Netgear / WG111U */ |
| 1774 | AR5523_DEVICE_UG(0x0846, 0x4250), /* Netgear / WG111T */ |
| 1775 | AR5523_DEVICE_UG(0x0846, 0x5f00), /* Netgear / WPN111 */ |
| 1776 | AR5523_DEVICE_UG(0x157e, 0x3006), /* Umedia / AR5523_1 */ |
| 1777 | AR5523_DEVICE_UX(0x157e, 0x3205), /* Umedia / AR5523_2 */ |
| 1778 | AR5523_DEVICE_UG(0x157e, 0x3006), /* Umedia / TEW444UBEU */ |
| 1779 | AR5523_DEVICE_UG(0x1435, 0x0826), /* Wistronneweb / AR5523_1 */ |
| 1780 | AR5523_DEVICE_UX(0x1435, 0x0828), /* Wistronneweb / AR5523_2 */ |
| 1781 | AR5523_DEVICE_UG(0x0cde, 0x0012), /* Zcom / AR5523 */ |
| 1782 | AR5523_DEVICE_UG(0x1385, 0x4250), /* Netgear3 / WG111T (2) */ |
| 1783 | AR5523_DEVICE_UG(0x1385, 0x5f00), /* Netgear / WPN111 */ |
| 1784 | AR5523_DEVICE_UG(0x1385, 0x5f02), /* Netgear / WPN111 */ |
| 1785 | { } |
| 1786 | }; |
| 1787 | MODULE_DEVICE_TABLE(usb, ar5523_id_table); |
| 1788 | |
| 1789 | static struct usb_driver ar5523_driver = { |
| 1790 | .name = "ar5523", |
| 1791 | .id_table = ar5523_id_table, |
| 1792 | .probe = ar5523_probe, |
| 1793 | .disconnect = ar5523_disconnect, |
| 1794 | }; |
| 1795 | |
Wei Yongjun | f0a5fd4 | 2012-11-01 09:59:13 +0800 | [diff] [blame] | 1796 | module_usb_driver(ar5523_driver); |
Pontus Fuchs | b7d572e | 2012-10-23 20:33:57 +0200 | [diff] [blame] | 1797 | |
| 1798 | MODULE_LICENSE("Dual BSD/GPL"); |
| 1799 | MODULE_FIRMWARE(AR5523_FIRMWARE_FILE); |