blob: 832f41f37385c19d7567fec2b6908d2d83abb18b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * This header file contains public constants and structures used by
3 * the scsi code for linux.
4 *
5 * For documentation on the OPCODES, MESSAGES, and SENSE values,
6 * please consult the SCSI standard.
7 */
8#ifndef _SCSI_SCSI_H
9#define _SCSI_SCSI_H
10
11#include <linux/types.h>
James Bottomleyf290f192009-02-08 21:59:48 -060012
13struct scsi_cmnd;
Linus Torvalds1da177e2005-04-16 15:20:36 -070014
15/*
James Bottomleyd3f46f32008-01-15 11:11:46 -060016 * The maximum number of SG segments that we will put inside a
17 * scatterlist (unless chaining is used). Should ideally fit inside a
18 * single page, to avoid a higher order allocation. We could define this
19 * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order. The
20 * minimum value is 32
21 */
22#define SCSI_MAX_SG_SEGMENTS 128
23
24/*
25 * Like SCSI_MAX_SG_SEGMENTS, but for archs that have sg chaining. This limit
26 * is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
27 */
28#ifdef ARCH_HAS_SG_CHAIN
29#define SCSI_MAX_SG_CHAIN_SEGMENTS 2048
30#else
31#define SCSI_MAX_SG_CHAIN_SEGMENTS SCSI_MAX_SG_SEGMENTS
32#endif
33
34/*
Christoph Hellwige02f3f52006-01-13 19:04:00 +010035 * Special value for scanning to specify scanning or rescanning of all
36 * possible channels, (target) ids, or luns on a given shost.
37 */
38#define SCAN_WILD_CARD ~0
39
40/*
Linus Torvalds1da177e2005-04-16 15:20:36 -070041 * SCSI opcodes
42 */
43
44#define TEST_UNIT_READY 0x00
45#define REZERO_UNIT 0x01
46#define REQUEST_SENSE 0x03
47#define FORMAT_UNIT 0x04
48#define READ_BLOCK_LIMITS 0x05
49#define REASSIGN_BLOCKS 0x07
Gerd Knorr daa6eda2005-05-10 10:59:13 +020050#define INITIALIZE_ELEMENT_STATUS 0x07
Linus Torvalds1da177e2005-04-16 15:20:36 -070051#define READ_6 0x08
52#define WRITE_6 0x0a
53#define SEEK_6 0x0b
54#define READ_REVERSE 0x0f
55#define WRITE_FILEMARKS 0x10
56#define SPACE 0x11
57#define INQUIRY 0x12
58#define RECOVER_BUFFERED_DATA 0x14
59#define MODE_SELECT 0x15
60#define RESERVE 0x16
61#define RELEASE 0x17
62#define COPY 0x18
63#define ERASE 0x19
64#define MODE_SENSE 0x1a
65#define START_STOP 0x1b
66#define RECEIVE_DIAGNOSTIC 0x1c
67#define SEND_DIAGNOSTIC 0x1d
68#define ALLOW_MEDIUM_REMOVAL 0x1e
69
70#define SET_WINDOW 0x24
71#define READ_CAPACITY 0x25
72#define READ_10 0x28
73#define WRITE_10 0x2a
74#define SEEK_10 0x2b
Gerd Knorr daa6eda2005-05-10 10:59:13 +020075#define POSITION_TO_ELEMENT 0x2b
Linus Torvalds1da177e2005-04-16 15:20:36 -070076#define WRITE_VERIFY 0x2e
77#define VERIFY 0x2f
78#define SEARCH_HIGH 0x30
79#define SEARCH_EQUAL 0x31
80#define SEARCH_LOW 0x32
81#define SET_LIMITS 0x33
82#define PRE_FETCH 0x34
83#define READ_POSITION 0x34
84#define SYNCHRONIZE_CACHE 0x35
85#define LOCK_UNLOCK_CACHE 0x36
86#define READ_DEFECT_DATA 0x37
87#define MEDIUM_SCAN 0x38
88#define COMPARE 0x39
89#define COPY_VERIFY 0x3a
90#define WRITE_BUFFER 0x3b
91#define READ_BUFFER 0x3c
92#define UPDATE_BLOCK 0x3d
93#define READ_LONG 0x3e
94#define WRITE_LONG 0x3f
95#define CHANGE_DEFINITION 0x40
96#define WRITE_SAME 0x41
Martin K. Petersenf57e4502009-10-15 14:43:23 -040097#define UNMAP 0x42
Linus Torvalds1da177e2005-04-16 15:20:36 -070098#define READ_TOC 0x43
99#define LOG_SELECT 0x4c
100#define LOG_SENSE 0x4d
FUJITA Tomonoric639d142008-01-23 01:32:01 +0900101#define XDWRITEREAD_10 0x53
Linus Torvalds1da177e2005-04-16 15:20:36 -0700102#define MODE_SELECT_10 0x55
103#define RESERVE_10 0x56
104#define RELEASE_10 0x57
105#define MODE_SENSE_10 0x5a
106#define PERSISTENT_RESERVE_IN 0x5e
107#define PERSISTENT_RESERVE_OUT 0x5f
Boaz Harroshdb4742d2008-04-30 11:27:26 +0300108#define VARIABLE_LENGTH_CMD 0x7f
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109#define REPORT_LUNS 0xa0
Hannes Reinecke5a09e392006-10-20 09:58:47 +0200110#define MAINTENANCE_IN 0xa3
Hannes Reinecke057ea7c2008-07-17 16:53:21 -0700111#define MAINTENANCE_OUT 0xa4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700112#define MOVE_MEDIUM 0xa5
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200113#define EXCHANGE_MEDIUM 0xa6
Linus Torvalds1da177e2005-04-16 15:20:36 -0700114#define READ_12 0xa8
115#define WRITE_12 0xaa
116#define WRITE_VERIFY_12 0xae
117#define SEARCH_HIGH_12 0xb0
118#define SEARCH_EQUAL_12 0xb1
119#define SEARCH_LOW_12 0xb2
120#define READ_ELEMENT_STATUS 0xb8
121#define SEND_VOLUME_TAG 0xb6
122#define WRITE_LONG_2 0xea
123#define READ_16 0x88
124#define WRITE_16 0x8a
125#define VERIFY_16 0x8f
Martin K. Petersenf57e4502009-10-15 14:43:23 -0400126#define WRITE_SAME_16 0x93
Linus Torvalds1da177e2005-04-16 15:20:36 -0700127#define SERVICE_ACTION_IN 0x9e
128/* values for service action in */
129#define SAI_READ_CAPACITY_16 0x10
Martin K. Petersenf57e4502009-10-15 14:43:23 -0400130#define SAI_GET_LBA_STATUS 0x12
Hannes Reinecke5a09e392006-10-20 09:58:47 +0200131/* values for maintenance in */
132#define MI_REPORT_TARGET_PGS 0x0a
Hannes Reinecke057ea7c2008-07-17 16:53:21 -0700133/* values for maintenance out */
134#define MO_SET_TARGET_PGS 0x0a
Martin K. Petersen4e7392e2009-09-20 16:49:38 -0400135/* values for variable length command */
136#define READ_32 0x09
137#define WRITE_32 0x0b
Martin K. Petersenf57e4502009-10-15 14:43:23 -0400138#define WRITE_SAME_32 0x0d
Linus Torvalds1da177e2005-04-16 15:20:36 -0700139
Jeff Garzikb0955182005-05-12 15:45:22 -0400140/* Values for T10/04-262r7 */
141#define ATA_16 0x85 /* 16-byte pass-thru */
142#define ATA_12 0xa1 /* 12-byte pass-thru */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143
144/*
Boaz Harroshdb4742d2008-04-30 11:27:26 +0300145 * SCSI command lengths
146 */
147
148#define SCSI_MAX_VARLEN_CDB_SIZE 260
149
150/* defined in T10 SCSI Primary Commands-2 (SPC2) */
151struct scsi_varlen_cdb_hdr {
152 u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
153 u8 control;
154 u8 misc[5];
155 u8 additional_cdb_length; /* total cdb length - 8 */
156 __be16 service_action;
157 /* service specific data follows */
158};
159
160static inline unsigned
161scsi_varlen_cdb_length(const void *hdr)
162{
163 return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
164}
165
166extern const unsigned char scsi_command_size_tbl[8];
167#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
168
169static inline unsigned
170scsi_command_size(const unsigned char *cmnd)
171{
172 return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
173 scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
174}
175
176/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700177 * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
178 * T10/1561-D Revision 4 Draft dated 7th November 2002.
179 */
180#define SAM_STAT_GOOD 0x00
181#define SAM_STAT_CHECK_CONDITION 0x02
182#define SAM_STAT_CONDITION_MET 0x04
183#define SAM_STAT_BUSY 0x08
184#define SAM_STAT_INTERMEDIATE 0x10
185#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
186#define SAM_STAT_RESERVATION_CONFLICT 0x18
187#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
188#define SAM_STAT_TASK_SET_FULL 0x28
189#define SAM_STAT_ACA_ACTIVE 0x30
190#define SAM_STAT_TASK_ABORTED 0x40
191
192/** scsi_status_is_good - check the status return.
193 *
194 * @status: the status passed up from the driver (including host and
195 * driver components)
196 *
197 * This returns true for known good conditions that may be treated as
198 * command completed normally
199 */
200static inline int scsi_status_is_good(int status)
201{
202 /*
203 * FIXME: bit0 is listed as reserved in SCSI-2, but is
204 * significant in SCSI-3. For now, we follow the SCSI-2
205 * behaviour and ignore reserved bits.
206 */
207 status &= 0xfe;
208 return ((status == SAM_STAT_GOOD) ||
209 (status == SAM_STAT_INTERMEDIATE) ||
210 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
211 /* FIXME: this is obsolete in SAM-3 */
212 (status == SAM_STAT_COMMAND_TERMINATED));
213}
214
215/*
216 * Status codes. These are deprecated as they are shifted 1 bit right
217 * from those found in the SCSI standards. This causes confusion for
218 * applications that are ported to several OSes. Prefer SAM Status codes
219 * above.
220 */
221
222#define GOOD 0x00
223#define CHECK_CONDITION 0x01
224#define CONDITION_GOOD 0x02
225#define BUSY 0x04
226#define INTERMEDIATE_GOOD 0x08
227#define INTERMEDIATE_C_GOOD 0x0a
228#define RESERVATION_CONFLICT 0x0c
229#define COMMAND_TERMINATED 0x11
230#define QUEUE_FULL 0x14
231#define ACA_ACTIVE 0x18
232#define TASK_ABORTED 0x20
233
234#define STATUS_MASK 0xfe
235
236/*
237 * SENSE KEYS
238 */
239
240#define NO_SENSE 0x00
241#define RECOVERED_ERROR 0x01
242#define NOT_READY 0x02
243#define MEDIUM_ERROR 0x03
244#define HARDWARE_ERROR 0x04
245#define ILLEGAL_REQUEST 0x05
246#define UNIT_ATTENTION 0x06
247#define DATA_PROTECT 0x07
248#define BLANK_CHECK 0x08
249#define COPY_ABORTED 0x0a
250#define ABORTED_COMMAND 0x0b
251#define VOLUME_OVERFLOW 0x0d
252#define MISCOMPARE 0x0e
253
254
255/*
256 * DEVICE TYPES
Michael Tokarevd7b8bcb2006-10-27 16:02:37 +0400257 * Please keep them in 0x%02x format for $MODALIAS to work
Linus Torvalds1da177e2005-04-16 15:20:36 -0700258 */
259
260#define TYPE_DISK 0x00
261#define TYPE_TAPE 0x01
262#define TYPE_PRINTER 0x02
263#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
264#define TYPE_WORM 0x04 /* Treated as ROM by our system */
265#define TYPE_ROM 0x05
266#define TYPE_SCANNER 0x06
267#define TYPE_MOD 0x07 /* Magneto-optical disk -
268 * - treated as TYPE_DISK */
269#define TYPE_MEDIUM_CHANGER 0x08
270#define TYPE_COMM 0x09 /* Communications device */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700271#define TYPE_RAID 0x0c
James Bottomley7f602c52005-05-21 10:24:37 -0500272#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
Al Viro 631e8a12005-05-16 01:59:55 +0100273#define TYPE_RBC 0x0e
Boaz Harrosh82443a52009-01-25 16:51:33 +0200274#define TYPE_OSD 0x11
Linus Torvalds1da177e2005-04-16 15:20:36 -0700275#define TYPE_NO_LUN 0x7f
276
James Bottomley89dddbc2008-02-03 15:32:59 -0600277/* SCSI protocols; these are taken from SPC-3 section 7.5 */
278enum scsi_protocol {
279 SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */
280 SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */
281 SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */
282 SCSI_PROTOCOL_SBP = 3, /* firewire */
283 SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */
284 SCSI_PROTOCOL_ISCSI = 5,
285 SCSI_PROTOCOL_SAS = 6,
286 SCSI_PROTOCOL_ADT = 7, /* Media Changers */
287 SCSI_PROTOCOL_ATA = 8,
288 SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
289};
290
Matthew Wilcox4ff36712006-07-04 12:15:20 -0600291/* Returns a human-readable name for the device */
292extern const char * scsi_device_type(unsigned type);
293
Linus Torvalds1da177e2005-04-16 15:20:36 -0700294/*
295 * standard mode-select header prepended to all mode-select commands
296 */
297
298struct ccs_modesel_head {
299 __u8 _r1; /* reserved */
300 __u8 medium; /* device-specific medium type */
301 __u8 _r2; /* reserved */
302 __u8 block_desc_length; /* block descriptor length */
303 __u8 density; /* device-specific density code */
304 __u8 number_blocks_hi; /* number of blocks in this block desc */
305 __u8 number_blocks_med;
306 __u8 number_blocks_lo;
307 __u8 _r3;
308 __u8 block_length_hi; /* block length for blocks in this desc */
309 __u8 block_length_med;
310 __u8 block_length_lo;
311};
312
313/*
314 * ScsiLun: 8 byte LUN.
315 */
316struct scsi_lun {
317 __u8 scsi_lun[8];
318};
319
320/*
James Bottomley01b291b2008-08-21 15:14:14 -0500321 * The Well Known LUNS (SAM-3) in our int representation of a LUN
322 */
323#define SCSI_W_LUN_BASE 0xc100
324#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
325#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
326#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
327
328static inline int scsi_is_wlun(unsigned int lun)
329{
330 return (lun & 0xff00) == SCSI_W_LUN_BASE;
331}
332
333
334/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700335 * MESSAGE CODES
336 */
337
338#define COMMAND_COMPLETE 0x00
339#define EXTENDED_MESSAGE 0x01
340#define EXTENDED_MODIFY_DATA_POINTER 0x00
341#define EXTENDED_SDTR 0x01
342#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
343#define EXTENDED_WDTR 0x03
344#define EXTENDED_PPR 0x04
345#define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05
346#define SAVE_POINTERS 0x02
347#define RESTORE_POINTERS 0x03
348#define DISCONNECT 0x04
349#define INITIATOR_ERROR 0x05
350#define ABORT_TASK_SET 0x06
351#define MESSAGE_REJECT 0x07
352#define NOP 0x08
353#define MSG_PARITY_ERROR 0x09
354#define LINKED_CMD_COMPLETE 0x0a
355#define LINKED_FLG_CMD_COMPLETE 0x0b
356#define TARGET_RESET 0x0c
357#define ABORT_TASK 0x0d
358#define CLEAR_TASK_SET 0x0e
359#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
360#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
361#define CLEAR_ACA 0x16
362#define LOGICAL_UNIT_RESET 0x17
363#define SIMPLE_QUEUE_TAG 0x20
364#define HEAD_OF_QUEUE_TAG 0x21
365#define ORDERED_QUEUE_TAG 0x22
366#define IGNORE_WIDE_RESIDUE 0x23
367#define ACA 0x24
368#define QAS_REQUEST 0x55
369
370/* Old SCSI2 names, don't use in new code */
371#define BUS_DEVICE_RESET TARGET_RESET
372#define ABORT ABORT_TASK_SET
373
374/*
375 * Host byte codes
376 */
377
378#define DID_OK 0x00 /* NO error */
379#define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */
380#define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */
381#define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */
382#define DID_BAD_TARGET 0x04 /* BAD target. */
383#define DID_ABORT 0x05 /* Told to abort for some other reason */
384#define DID_PARITY 0x06 /* Parity error */
385#define DID_ERROR 0x07 /* Internal error */
386#define DID_RESET 0x08 /* Reset by somebody. */
387#define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */
388#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */
389#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */
390#define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */
bf341912005-04-12 17:49:09 -0500391#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also
392 * without decrementing the retry count */
Mike Christiea4dfaa62008-08-19 18:45:25 -0500393#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
394 * and the driver blocked the port to
395 * recover the link. Transport class will
396 * retry or fail IO */
397#define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398#define DRIVER_OK 0x00 /* Driver status */
399
400/*
401 * These indicate the error that occurred, and what is available.
402 */
403
404#define DRIVER_BUSY 0x01
405#define DRIVER_SOFT 0x02
406#define DRIVER_MEDIA 0x03
407#define DRIVER_ERROR 0x04
408
409#define DRIVER_INVALID 0x05
410#define DRIVER_TIMEOUT 0x06
411#define DRIVER_HARD 0x07
412#define DRIVER_SENSE 0x08
413
Linus Torvalds1da177e2005-04-16 15:20:36 -0700414/*
415 * Internal return values.
416 */
417
418#define NEEDS_RETRY 0x2001
419#define SUCCESS 0x2002
420#define FAILED 0x2003
421#define QUEUED 0x2004
422#define SOFT_ERROR 0x2005
423#define ADD_TO_MLQUEUE 0x2006
424#define TIMEOUT_ERROR 0x2007
Chandra Seetharamana6a8d9f2008-05-01 14:49:46 -0700425#define SCSI_RETURN_NOT_HANDLED 0x2008
Christof Schmitt2f2eb582010-03-24 16:50:30 +0100426#define FAST_IO_FAIL 0x2009
Linus Torvalds1da177e2005-04-16 15:20:36 -0700427
428/*
429 * Midlevel queue return values.
430 */
431#define SCSI_MLQUEUE_HOST_BUSY 0x1055
432#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
433#define SCSI_MLQUEUE_EH_RETRY 0x1057
Mike Christief0c0a372008-08-17 15:24:38 -0500434#define SCSI_MLQUEUE_TARGET_BUSY 0x1058
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435
436/*
437 * Use these to separate status msg and our bytes
438 *
439 * These are set by:
440 *
441 * status byte = set from target device
442 * msg_byte = return status from host adapter itself.
443 * host_byte = set by low-level driver to indicate status.
444 * driver_byte = set by mid-level.
445 */
446#define status_byte(result) (((result) >> 1) & 0x7f)
447#define msg_byte(result) (((result) >> 8) & 0xff)
448#define host_byte(result) (((result) >> 16) & 0xff)
449#define driver_byte(result) (((result) >> 24) & 0xff)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700450
451#define sense_class(sense) (((sense) >> 4) & 0x7)
452#define sense_error(sense) ((sense) & 0xf)
453#define sense_valid(sense) ((sense) & 0x80);
454
b6651122005-04-03 14:52:44 -0500455/*
456 * default timeouts
457*/
458#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ)
459#define START_STOP_TIMEOUT (60 * HZ)
460#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ)
461#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ)
462#define READ_DEFECT_DATA_TIMEOUT (60 * HZ )
463
Linus Torvalds1da177e2005-04-16 15:20:36 -0700464
465#define IDENTIFY_BASE 0x80
466#define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\
467 ((can_disconnect) ? 0x40 : 0) |\
468 ((lun) & 0x07))
469
470/*
471 * struct scsi_device::scsi_level values. For SCSI devices other than those
472 * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
473 * where "resp" is a byte array of the response to an INQUIRY. The scsi_level
474 * variable is visible to the user via sysfs.
475 */
476
477#define SCSI_UNKNOWN 0
478#define SCSI_1 1
479#define SCSI_1_CCS 2
480#define SCSI_2 3
481#define SCSI_3 4 /* SPC */
482#define SCSI_SPC_2 5
483#define SCSI_SPC_3 6
484
485/*
486 * INQ PERIPHERAL QUALIFIERS
487 */
488#define SCSI_INQ_PQ_CON 0x00
489#define SCSI_INQ_PQ_NOT_CON 0x01
490#define SCSI_INQ_PQ_NOT_CAP 0x03
491
492
493/*
494 * Here are some scsi specific ioctl commands which are sometimes useful.
495 *
496 * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
497 */
498
499/* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */
500#define SCSI_IOCTL_GET_IDLUN 0x5382
501
502/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
503
504/* Used to obtain the host number of a device. */
505#define SCSI_IOCTL_PROBE_HOST 0x5385
506
507/* Used to obtain the bus number for a device */
508#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
509
510/* Used to obtain the PCI location of a device */
511#define SCSI_IOCTL_GET_PCI 0x5387
512
James Bottomley2908d772006-08-29 09:22:51 -0500513/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
FUJITA Tomonori4a531e82006-10-20 09:08:18 +0900514static inline __u32 scsi_to_u32(__u8 *ptr)
James Bottomley2908d772006-08-29 09:22:51 -0500515{
516 return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
517}
518
Linus Torvalds1da177e2005-04-16 15:20:36 -0700519#endif /* _SCSI_SCSI_H */