blob: b361172b576c415fcc8faf298759c0647f1df73f [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * This header file contains public constants and structures used by
3 * the scsi code for linux.
4 *
5 * For documentation on the OPCODES, MESSAGES, and SENSE values,
6 * please consult the SCSI standard.
7 */
8#ifndef _SCSI_SCSI_H
9#define _SCSI_SCSI_H
10
11#include <linux/types.h>
12
13/*
14 * The maximum sg list length SCSI can cope with
15 * (currently must be a power of 2 between 32 and 256)
16 */
17#define SCSI_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS
18
19
20/*
21 * SCSI command lengths
22 */
23
24extern const unsigned char scsi_command_size[8];
25#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
26
27/*
28 * SCSI device types
29 */
30
James Bottomley7f602c52005-05-21 10:24:37 -050031#define MAX_SCSI_DEVICE_CODE 15
Linus Torvalds1da177e2005-04-16 15:20:36 -070032extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
33
34/*
35 * SCSI opcodes
36 */
37
38#define TEST_UNIT_READY 0x00
39#define REZERO_UNIT 0x01
40#define REQUEST_SENSE 0x03
41#define FORMAT_UNIT 0x04
42#define READ_BLOCK_LIMITS 0x05
43#define REASSIGN_BLOCKS 0x07
Gerd Knorr daa6eda2005-05-10 10:59:13 +020044#define INITIALIZE_ELEMENT_STATUS 0x07
Linus Torvalds1da177e2005-04-16 15:20:36 -070045#define READ_6 0x08
46#define WRITE_6 0x0a
47#define SEEK_6 0x0b
48#define READ_REVERSE 0x0f
49#define WRITE_FILEMARKS 0x10
50#define SPACE 0x11
51#define INQUIRY 0x12
52#define RECOVER_BUFFERED_DATA 0x14
53#define MODE_SELECT 0x15
54#define RESERVE 0x16
55#define RELEASE 0x17
56#define COPY 0x18
57#define ERASE 0x19
58#define MODE_SENSE 0x1a
59#define START_STOP 0x1b
60#define RECEIVE_DIAGNOSTIC 0x1c
61#define SEND_DIAGNOSTIC 0x1d
62#define ALLOW_MEDIUM_REMOVAL 0x1e
63
64#define SET_WINDOW 0x24
65#define READ_CAPACITY 0x25
66#define READ_10 0x28
67#define WRITE_10 0x2a
68#define SEEK_10 0x2b
Gerd Knorr daa6eda2005-05-10 10:59:13 +020069#define POSITION_TO_ELEMENT 0x2b
Linus Torvalds1da177e2005-04-16 15:20:36 -070070#define WRITE_VERIFY 0x2e
71#define VERIFY 0x2f
72#define SEARCH_HIGH 0x30
73#define SEARCH_EQUAL 0x31
74#define SEARCH_LOW 0x32
75#define SET_LIMITS 0x33
76#define PRE_FETCH 0x34
77#define READ_POSITION 0x34
78#define SYNCHRONIZE_CACHE 0x35
79#define LOCK_UNLOCK_CACHE 0x36
80#define READ_DEFECT_DATA 0x37
81#define MEDIUM_SCAN 0x38
82#define COMPARE 0x39
83#define COPY_VERIFY 0x3a
84#define WRITE_BUFFER 0x3b
85#define READ_BUFFER 0x3c
86#define UPDATE_BLOCK 0x3d
87#define READ_LONG 0x3e
88#define WRITE_LONG 0x3f
89#define CHANGE_DEFINITION 0x40
90#define WRITE_SAME 0x41
91#define READ_TOC 0x43
92#define LOG_SELECT 0x4c
93#define LOG_SENSE 0x4d
94#define MODE_SELECT_10 0x55
95#define RESERVE_10 0x56
96#define RELEASE_10 0x57
97#define MODE_SENSE_10 0x5a
98#define PERSISTENT_RESERVE_IN 0x5e
99#define PERSISTENT_RESERVE_OUT 0x5f
100#define REPORT_LUNS 0xa0
101#define MOVE_MEDIUM 0xa5
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200102#define EXCHANGE_MEDIUM 0xa6
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103#define READ_12 0xa8
104#define WRITE_12 0xaa
105#define WRITE_VERIFY_12 0xae
106#define SEARCH_HIGH_12 0xb0
107#define SEARCH_EQUAL_12 0xb1
108#define SEARCH_LOW_12 0xb2
109#define READ_ELEMENT_STATUS 0xb8
110#define SEND_VOLUME_TAG 0xb6
111#define WRITE_LONG_2 0xea
112#define READ_16 0x88
113#define WRITE_16 0x8a
114#define VERIFY_16 0x8f
115#define SERVICE_ACTION_IN 0x9e
116/* values for service action in */
117#define SAI_READ_CAPACITY_16 0x10
118
119
120/*
121 * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
122 * T10/1561-D Revision 4 Draft dated 7th November 2002.
123 */
124#define SAM_STAT_GOOD 0x00
125#define SAM_STAT_CHECK_CONDITION 0x02
126#define SAM_STAT_CONDITION_MET 0x04
127#define SAM_STAT_BUSY 0x08
128#define SAM_STAT_INTERMEDIATE 0x10
129#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
130#define SAM_STAT_RESERVATION_CONFLICT 0x18
131#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
132#define SAM_STAT_TASK_SET_FULL 0x28
133#define SAM_STAT_ACA_ACTIVE 0x30
134#define SAM_STAT_TASK_ABORTED 0x40
135
136/** scsi_status_is_good - check the status return.
137 *
138 * @status: the status passed up from the driver (including host and
139 * driver components)
140 *
141 * This returns true for known good conditions that may be treated as
142 * command completed normally
143 */
144static inline int scsi_status_is_good(int status)
145{
146 /*
147 * FIXME: bit0 is listed as reserved in SCSI-2, but is
148 * significant in SCSI-3. For now, we follow the SCSI-2
149 * behaviour and ignore reserved bits.
150 */
151 status &= 0xfe;
152 return ((status == SAM_STAT_GOOD) ||
153 (status == SAM_STAT_INTERMEDIATE) ||
154 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
155 /* FIXME: this is obsolete in SAM-3 */
156 (status == SAM_STAT_COMMAND_TERMINATED));
157}
158
159/*
160 * Status codes. These are deprecated as they are shifted 1 bit right
161 * from those found in the SCSI standards. This causes confusion for
162 * applications that are ported to several OSes. Prefer SAM Status codes
163 * above.
164 */
165
166#define GOOD 0x00
167#define CHECK_CONDITION 0x01
168#define CONDITION_GOOD 0x02
169#define BUSY 0x04
170#define INTERMEDIATE_GOOD 0x08
171#define INTERMEDIATE_C_GOOD 0x0a
172#define RESERVATION_CONFLICT 0x0c
173#define COMMAND_TERMINATED 0x11
174#define QUEUE_FULL 0x14
175#define ACA_ACTIVE 0x18
176#define TASK_ABORTED 0x20
177
178#define STATUS_MASK 0xfe
179
180/*
181 * SENSE KEYS
182 */
183
184#define NO_SENSE 0x00
185#define RECOVERED_ERROR 0x01
186#define NOT_READY 0x02
187#define MEDIUM_ERROR 0x03
188#define HARDWARE_ERROR 0x04
189#define ILLEGAL_REQUEST 0x05
190#define UNIT_ATTENTION 0x06
191#define DATA_PROTECT 0x07
192#define BLANK_CHECK 0x08
193#define COPY_ABORTED 0x0a
194#define ABORTED_COMMAND 0x0b
195#define VOLUME_OVERFLOW 0x0d
196#define MISCOMPARE 0x0e
197
198
199/*
200 * DEVICE TYPES
201 */
202
203#define TYPE_DISK 0x00
204#define TYPE_TAPE 0x01
205#define TYPE_PRINTER 0x02
206#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
207#define TYPE_WORM 0x04 /* Treated as ROM by our system */
208#define TYPE_ROM 0x05
209#define TYPE_SCANNER 0x06
210#define TYPE_MOD 0x07 /* Magneto-optical disk -
211 * - treated as TYPE_DISK */
212#define TYPE_MEDIUM_CHANGER 0x08
213#define TYPE_COMM 0x09 /* Communications device */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700214#define TYPE_RAID 0x0c
James Bottomley7f602c52005-05-21 10:24:37 -0500215#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
Al Viro 631e8a12005-05-16 01:59:55 +0100216#define TYPE_RBC 0x0e
Linus Torvalds1da177e2005-04-16 15:20:36 -0700217#define TYPE_NO_LUN 0x7f
218
219/*
220 * standard mode-select header prepended to all mode-select commands
221 */
222
223struct ccs_modesel_head {
224 __u8 _r1; /* reserved */
225 __u8 medium; /* device-specific medium type */
226 __u8 _r2; /* reserved */
227 __u8 block_desc_length; /* block descriptor length */
228 __u8 density; /* device-specific density code */
229 __u8 number_blocks_hi; /* number of blocks in this block desc */
230 __u8 number_blocks_med;
231 __u8 number_blocks_lo;
232 __u8 _r3;
233 __u8 block_length_hi; /* block length for blocks in this desc */
234 __u8 block_length_med;
235 __u8 block_length_lo;
236};
237
238/*
239 * ScsiLun: 8 byte LUN.
240 */
241struct scsi_lun {
242 __u8 scsi_lun[8];
243};
244
245/*
246 * MESSAGE CODES
247 */
248
249#define COMMAND_COMPLETE 0x00
250#define EXTENDED_MESSAGE 0x01
251#define EXTENDED_MODIFY_DATA_POINTER 0x00
252#define EXTENDED_SDTR 0x01
253#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
254#define EXTENDED_WDTR 0x03
255#define EXTENDED_PPR 0x04
256#define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05
257#define SAVE_POINTERS 0x02
258#define RESTORE_POINTERS 0x03
259#define DISCONNECT 0x04
260#define INITIATOR_ERROR 0x05
261#define ABORT_TASK_SET 0x06
262#define MESSAGE_REJECT 0x07
263#define NOP 0x08
264#define MSG_PARITY_ERROR 0x09
265#define LINKED_CMD_COMPLETE 0x0a
266#define LINKED_FLG_CMD_COMPLETE 0x0b
267#define TARGET_RESET 0x0c
268#define ABORT_TASK 0x0d
269#define CLEAR_TASK_SET 0x0e
270#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
271#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
272#define CLEAR_ACA 0x16
273#define LOGICAL_UNIT_RESET 0x17
274#define SIMPLE_QUEUE_TAG 0x20
275#define HEAD_OF_QUEUE_TAG 0x21
276#define ORDERED_QUEUE_TAG 0x22
277#define IGNORE_WIDE_RESIDUE 0x23
278#define ACA 0x24
279#define QAS_REQUEST 0x55
280
281/* Old SCSI2 names, don't use in new code */
282#define BUS_DEVICE_RESET TARGET_RESET
283#define ABORT ABORT_TASK_SET
284
285/*
286 * Host byte codes
287 */
288
289#define DID_OK 0x00 /* NO error */
290#define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */
291#define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */
292#define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */
293#define DID_BAD_TARGET 0x04 /* BAD target. */
294#define DID_ABORT 0x05 /* Told to abort for some other reason */
295#define DID_PARITY 0x06 /* Parity error */
296#define DID_ERROR 0x07 /* Internal error */
297#define DID_RESET 0x08 /* Reset by somebody. */
298#define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */
299#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */
300#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */
301#define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */
bf341912005-04-12 17:49:09 -0500302#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also
303 * without decrementing the retry count */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700304#define DRIVER_OK 0x00 /* Driver status */
305
306/*
307 * These indicate the error that occurred, and what is available.
308 */
309
310#define DRIVER_BUSY 0x01
311#define DRIVER_SOFT 0x02
312#define DRIVER_MEDIA 0x03
313#define DRIVER_ERROR 0x04
314
315#define DRIVER_INVALID 0x05
316#define DRIVER_TIMEOUT 0x06
317#define DRIVER_HARD 0x07
318#define DRIVER_SENSE 0x08
319
320#define SUGGEST_RETRY 0x10
321#define SUGGEST_ABORT 0x20
322#define SUGGEST_REMAP 0x30
323#define SUGGEST_DIE 0x40
324#define SUGGEST_SENSE 0x80
325#define SUGGEST_IS_OK 0xff
326
327#define DRIVER_MASK 0x0f
328#define SUGGEST_MASK 0xf0
329
330/*
331 * Internal return values.
332 */
333
334#define NEEDS_RETRY 0x2001
335#define SUCCESS 0x2002
336#define FAILED 0x2003
337#define QUEUED 0x2004
338#define SOFT_ERROR 0x2005
339#define ADD_TO_MLQUEUE 0x2006
340#define TIMEOUT_ERROR 0x2007
341
342/*
343 * Midlevel queue return values.
344 */
345#define SCSI_MLQUEUE_HOST_BUSY 0x1055
346#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
347#define SCSI_MLQUEUE_EH_RETRY 0x1057
348
349/*
350 * Use these to separate status msg and our bytes
351 *
352 * These are set by:
353 *
354 * status byte = set from target device
355 * msg_byte = return status from host adapter itself.
356 * host_byte = set by low-level driver to indicate status.
357 * driver_byte = set by mid-level.
358 */
359#define status_byte(result) (((result) >> 1) & 0x7f)
360#define msg_byte(result) (((result) >> 8) & 0xff)
361#define host_byte(result) (((result) >> 16) & 0xff)
362#define driver_byte(result) (((result) >> 24) & 0xff)
363#define suggestion(result) (driver_byte(result) & SUGGEST_MASK)
364
365#define sense_class(sense) (((sense) >> 4) & 0x7)
366#define sense_error(sense) ((sense) & 0xf)
367#define sense_valid(sense) ((sense) & 0x80);
368
b6651122005-04-03 14:52:44 -0500369/*
370 * default timeouts
371*/
372#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ)
373#define START_STOP_TIMEOUT (60 * HZ)
374#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ)
375#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ)
376#define READ_DEFECT_DATA_TIMEOUT (60 * HZ )
377
Linus Torvalds1da177e2005-04-16 15:20:36 -0700378
379#define IDENTIFY_BASE 0x80
380#define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\
381 ((can_disconnect) ? 0x40 : 0) |\
382 ((lun) & 0x07))
383
384/*
385 * struct scsi_device::scsi_level values. For SCSI devices other than those
386 * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
387 * where "resp" is a byte array of the response to an INQUIRY. The scsi_level
388 * variable is visible to the user via sysfs.
389 */
390
391#define SCSI_UNKNOWN 0
392#define SCSI_1 1
393#define SCSI_1_CCS 2
394#define SCSI_2 3
395#define SCSI_3 4 /* SPC */
396#define SCSI_SPC_2 5
397#define SCSI_SPC_3 6
398
399/*
400 * INQ PERIPHERAL QUALIFIERS
401 */
402#define SCSI_INQ_PQ_CON 0x00
403#define SCSI_INQ_PQ_NOT_CON 0x01
404#define SCSI_INQ_PQ_NOT_CAP 0x03
405
406
407/*
408 * Here are some scsi specific ioctl commands which are sometimes useful.
409 *
410 * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
411 */
412
413/* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */
414#define SCSI_IOCTL_GET_IDLUN 0x5382
415
416/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
417
418/* Used to obtain the host number of a device. */
419#define SCSI_IOCTL_PROBE_HOST 0x5385
420
421/* Used to obtain the bus number for a device */
422#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
423
424/* Used to obtain the PCI location of a device */
425#define SCSI_IOCTL_GET_PCI 0x5387
426
427#endif /* _SCSI_SCSI_H */