Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Regulators driver for Dialog Semiconductor DA903x |
| 3 | * |
| 4 | * Copyright (C) 2006-2008 Marvell International Ltd. |
| 5 | * Copyright (C) 2008 Compulab Ltd. |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/kernel.h> |
| 13 | #include <linux/init.h> |
| 14 | #include <linux/err.h> |
| 15 | #include <linux/platform_device.h> |
| 16 | #include <linux/regulator/driver.h> |
| 17 | #include <linux/regulator/machine.h> |
| 18 | #include <linux/mfd/da903x.h> |
| 19 | |
| 20 | /* DA9030 Registers */ |
| 21 | #define DA9030_INVAL (-1) |
| 22 | #define DA9030_LDO1011 (0x10) |
| 23 | #define DA9030_LDO15 (0x11) |
| 24 | #define DA9030_LDO1416 (0x12) |
| 25 | #define DA9030_LDO1819 (0x13) |
| 26 | #define DA9030_LDO17 (0x14) |
| 27 | #define DA9030_BUCK2DVM1 (0x15) |
| 28 | #define DA9030_BUCK2DVM2 (0x16) |
| 29 | #define DA9030_RCTL11 (0x17) |
| 30 | #define DA9030_RCTL21 (0x18) |
| 31 | #define DA9030_LDO1 (0x90) |
| 32 | #define DA9030_LDO23 (0x91) |
| 33 | #define DA9030_LDO45 (0x92) |
| 34 | #define DA9030_LDO6 (0x93) |
| 35 | #define DA9030_LDO78 (0x94) |
| 36 | #define DA9030_LDO912 (0x95) |
| 37 | #define DA9030_BUCK (0x96) |
| 38 | #define DA9030_RCTL12 (0x97) |
| 39 | #define DA9030_RCTL22 (0x98) |
| 40 | #define DA9030_LDO_UNLOCK (0xa0) |
| 41 | #define DA9030_LDO_UNLOCK_MASK (0xe0) |
| 42 | #define DA9034_OVER1 (0x10) |
| 43 | |
| 44 | /* DA9034 Registers */ |
| 45 | #define DA9034_INVAL (-1) |
| 46 | #define DA9034_OVER2 (0x11) |
| 47 | #define DA9034_OVER3 (0x12) |
| 48 | #define DA9034_LDO643 (0x13) |
| 49 | #define DA9034_LDO987 (0x14) |
| 50 | #define DA9034_LDO1110 (0x15) |
| 51 | #define DA9034_LDO1312 (0x16) |
| 52 | #define DA9034_LDO1514 (0x17) |
| 53 | #define DA9034_VCC1 (0x20) |
| 54 | #define DA9034_ADTV1 (0x23) |
| 55 | #define DA9034_ADTV2 (0x24) |
| 56 | #define DA9034_AVRC (0x25) |
| 57 | #define DA9034_CDTV1 (0x26) |
| 58 | #define DA9034_CDTV2 (0x27) |
| 59 | #define DA9034_CVRC (0x28) |
| 60 | #define DA9034_SDTV1 (0x29) |
| 61 | #define DA9034_SDTV2 (0x2a) |
| 62 | #define DA9034_SVRC (0x2b) |
| 63 | #define DA9034_MDTV1 (0x32) |
| 64 | #define DA9034_MDTV2 (0x33) |
| 65 | #define DA9034_MVRC (0x34) |
| 66 | |
| 67 | struct da903x_regulator_info { |
| 68 | struct regulator_desc desc; |
| 69 | |
| 70 | int min_uV; |
| 71 | int max_uV; |
| 72 | int step_uV; |
| 73 | int vol_reg; |
| 74 | int vol_shift; |
| 75 | int vol_nbits; |
| 76 | int update_reg; |
| 77 | int update_bit; |
| 78 | int enable_reg; |
| 79 | int enable_bit; |
| 80 | }; |
| 81 | |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 82 | static inline struct device *to_da903x_dev(struct regulator_dev *rdev) |
| 83 | { |
| 84 | return rdev_get_dev(rdev)->parent->parent; |
| 85 | } |
| 86 | |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 87 | static inline int check_range(struct da903x_regulator_info *info, |
| 88 | int min_uV, int max_uV) |
| 89 | { |
| 90 | if (min_uV < info->min_uV || min_uV > info->max_uV) |
| 91 | return -EINVAL; |
| 92 | |
| 93 | return 0; |
| 94 | } |
| 95 | |
| 96 | /* DA9030/DA9034 common operations */ |
| 97 | static int da903x_set_ldo_voltage(struct regulator_dev *rdev, |
| 98 | int min_uV, int max_uV) |
| 99 | { |
| 100 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 101 | struct device *da9034_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 102 | uint8_t val, mask; |
| 103 | |
| 104 | if (check_range(info, min_uV, max_uV)) { |
Mike Rapoport | 471d8d4 | 2008-11-24 18:43:00 +0200 | [diff] [blame] | 105 | pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 106 | return -EINVAL; |
| 107 | } |
| 108 | |
| 109 | val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; |
| 110 | val <<= info->vol_shift; |
| 111 | mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; |
| 112 | |
| 113 | return da903x_update(da9034_dev, info->vol_reg, val, mask); |
| 114 | } |
| 115 | |
| 116 | static int da903x_get_voltage(struct regulator_dev *rdev) |
| 117 | { |
| 118 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 119 | struct device *da9034_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 120 | uint8_t val, mask; |
| 121 | int ret; |
| 122 | |
| 123 | ret = da903x_read(da9034_dev, info->vol_reg, &val); |
| 124 | if (ret) |
| 125 | return ret; |
| 126 | |
| 127 | mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; |
| 128 | val = (val & mask) >> info->vol_shift; |
| 129 | |
| 130 | return info->min_uV + info->step_uV * val; |
| 131 | } |
| 132 | |
| 133 | static int da903x_enable(struct regulator_dev *rdev) |
| 134 | { |
| 135 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 136 | struct device *da9034_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 137 | |
| 138 | return da903x_set_bits(da9034_dev, info->enable_reg, |
| 139 | 1 << info->enable_bit); |
| 140 | } |
| 141 | |
| 142 | static int da903x_disable(struct regulator_dev *rdev) |
| 143 | { |
| 144 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 145 | struct device *da9034_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 146 | |
| 147 | return da903x_clr_bits(da9034_dev, info->enable_reg, |
| 148 | 1 << info->enable_bit); |
| 149 | } |
| 150 | |
| 151 | static int da903x_is_enabled(struct regulator_dev *rdev) |
| 152 | { |
| 153 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 154 | struct device *da9034_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 155 | uint8_t reg_val; |
| 156 | int ret; |
| 157 | |
| 158 | ret = da903x_read(da9034_dev, info->enable_reg, ®_val); |
| 159 | if (ret) |
| 160 | return ret; |
| 161 | |
Mike Rapoport | 9618690 | 2008-11-25 10:19:52 +0200 | [diff] [blame] | 162 | return !!(reg_val & (1 << info->enable_bit)); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 163 | } |
| 164 | |
| 165 | /* DA9030 specific operations */ |
| 166 | static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev, |
| 167 | int min_uV, int max_uV) |
| 168 | { |
| 169 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 170 | struct device *da903x_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 171 | uint8_t val, mask; |
| 172 | int ret; |
| 173 | |
| 174 | if (check_range(info, min_uV, max_uV)) { |
Mike Rapoport | 471d8d4 | 2008-11-24 18:43:00 +0200 | [diff] [blame] | 175 | pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 176 | return -EINVAL; |
| 177 | } |
| 178 | |
| 179 | val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; |
| 180 | val <<= info->vol_shift; |
| 181 | mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; |
| 182 | val |= DA9030_LDO_UNLOCK; /* have to set UNLOCK bits */ |
| 183 | mask |= DA9030_LDO_UNLOCK_MASK; |
| 184 | |
| 185 | /* write twice */ |
| 186 | ret = da903x_update(da903x_dev, info->vol_reg, val, mask); |
| 187 | if (ret) |
| 188 | return ret; |
| 189 | |
| 190 | return da903x_update(da903x_dev, info->vol_reg, val, mask); |
| 191 | } |
| 192 | |
| 193 | static int da9030_set_ldo14_voltage(struct regulator_dev *rdev, |
| 194 | int min_uV, int max_uV) |
| 195 | { |
| 196 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 197 | struct device *da903x_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 198 | uint8_t val, mask; |
| 199 | int thresh; |
| 200 | |
| 201 | if (check_range(info, min_uV, max_uV)) { |
Mike Rapoport | 471d8d4 | 2008-11-24 18:43:00 +0200 | [diff] [blame] | 202 | pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 203 | return -EINVAL; |
| 204 | } |
| 205 | |
| 206 | thresh = (info->max_uV + info->min_uV) / 2; |
| 207 | if (min_uV < thresh) { |
| 208 | val = (thresh - min_uV + info->step_uV - 1) / info->step_uV; |
| 209 | val |= 0x4; |
| 210 | } else { |
| 211 | val = (min_uV - thresh + info->step_uV - 1) / info->step_uV; |
| 212 | } |
| 213 | |
| 214 | val <<= info->vol_shift; |
| 215 | mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; |
| 216 | |
| 217 | return da903x_update(da903x_dev, info->vol_reg, val, mask); |
| 218 | } |
| 219 | |
| 220 | static int da9030_get_ldo14_voltage(struct regulator_dev *rdev) |
| 221 | { |
| 222 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 223 | struct device *da903x_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 224 | uint8_t val, mask; |
| 225 | int ret; |
| 226 | |
| 227 | ret = da903x_read(da903x_dev, info->vol_reg, &val); |
| 228 | if (ret) |
| 229 | return ret; |
| 230 | |
| 231 | mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; |
| 232 | val = (val & mask) >> info->vol_shift; |
| 233 | |
| 234 | if (val & 0x4) |
| 235 | return info->min_uV + info->step_uV * (3 - (val & ~0x4)); |
| 236 | else |
| 237 | return (info->max_uV + info->min_uV) / 2 + |
| 238 | info->step_uV * (val & ~0x4); |
| 239 | } |
| 240 | |
| 241 | /* DA9034 specific operations */ |
| 242 | static int da9034_set_dvc_voltage(struct regulator_dev *rdev, |
| 243 | int min_uV, int max_uV) |
| 244 | { |
| 245 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 246 | struct device *da9034_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 247 | uint8_t val, mask; |
| 248 | int ret; |
| 249 | |
| 250 | if (check_range(info, min_uV, max_uV)) { |
Mike Rapoport | 471d8d4 | 2008-11-24 18:43:00 +0200 | [diff] [blame] | 251 | pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 252 | return -EINVAL; |
| 253 | } |
| 254 | |
| 255 | val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; |
| 256 | val <<= info->vol_shift; |
| 257 | mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; |
| 258 | |
| 259 | ret = da903x_update(da9034_dev, info->vol_reg, val, mask); |
| 260 | if (ret) |
| 261 | return ret; |
| 262 | |
| 263 | ret = da903x_set_bits(da9034_dev, info->update_reg, |
| 264 | 1 << info->update_bit); |
| 265 | return ret; |
| 266 | } |
| 267 | |
| 268 | static int da9034_set_ldo12_voltage(struct regulator_dev *rdev, |
| 269 | int min_uV, int max_uV) |
| 270 | { |
| 271 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 272 | struct device *da9034_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 273 | uint8_t val, mask; |
| 274 | |
| 275 | if (check_range(info, min_uV, max_uV)) { |
Mike Rapoport | 471d8d4 | 2008-11-24 18:43:00 +0200 | [diff] [blame] | 276 | pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 277 | return -EINVAL; |
| 278 | } |
| 279 | |
| 280 | val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; |
| 281 | val = (val > 7 || val < 20) ? 8 : val - 12; |
| 282 | val <<= info->vol_shift; |
| 283 | mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; |
| 284 | |
| 285 | return da903x_update(da9034_dev, info->vol_reg, val, mask); |
| 286 | } |
| 287 | |
| 288 | static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) |
| 289 | { |
| 290 | struct da903x_regulator_info *info = rdev_get_drvdata(rdev); |
Jonathan Cameron | 1841c0f | 2008-10-28 11:03:48 +0000 | [diff] [blame] | 291 | struct device *da9034_dev = to_da903x_dev(rdev); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 292 | uint8_t val, mask; |
| 293 | int ret; |
| 294 | |
| 295 | ret = da903x_read(da9034_dev, info->vol_reg, &val); |
| 296 | if (ret) |
| 297 | return ret; |
| 298 | |
| 299 | mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; |
| 300 | val = (val & mask) >> info->vol_shift; |
| 301 | |
| 302 | if (val >= 8) |
| 303 | return 2700000 + info->step_uV * (val - 8); |
| 304 | |
| 305 | return info->min_uV + info->step_uV * val; |
| 306 | } |
| 307 | |
| 308 | static struct regulator_ops da903x_regulator_ldo_ops = { |
| 309 | .set_voltage = da903x_set_ldo_voltage, |
| 310 | .get_voltage = da903x_get_voltage, |
| 311 | .enable = da903x_enable, |
| 312 | .disable = da903x_disable, |
| 313 | .is_enabled = da903x_is_enabled, |
| 314 | }; |
| 315 | |
| 316 | /* NOTE: this is dedicated for the insane DA9030 LDO14 */ |
| 317 | static struct regulator_ops da9030_regulator_ldo14_ops = { |
| 318 | .set_voltage = da9030_set_ldo14_voltage, |
| 319 | .get_voltage = da9030_get_ldo14_voltage, |
| 320 | .enable = da903x_enable, |
| 321 | .disable = da903x_disable, |
| 322 | .is_enabled = da903x_is_enabled, |
| 323 | }; |
| 324 | |
| 325 | /* NOTE: this is dedicated for the DA9030 LDO1 and LDO15 that have locks */ |
| 326 | static struct regulator_ops da9030_regulator_ldo1_15_ops = { |
| 327 | .set_voltage = da9030_set_ldo1_15_voltage, |
| 328 | .get_voltage = da903x_get_voltage, |
| 329 | .enable = da903x_enable, |
| 330 | .disable = da903x_disable, |
| 331 | .is_enabled = da903x_is_enabled, |
| 332 | }; |
| 333 | |
| 334 | static struct regulator_ops da9034_regulator_dvc_ops = { |
| 335 | .set_voltage = da9034_set_dvc_voltage, |
| 336 | .get_voltage = da903x_get_voltage, |
| 337 | .enable = da903x_enable, |
| 338 | .disable = da903x_disable, |
| 339 | .is_enabled = da903x_is_enabled, |
| 340 | }; |
| 341 | |
| 342 | /* NOTE: this is dedicated for the insane LDO12 */ |
| 343 | static struct regulator_ops da9034_regulator_ldo12_ops = { |
| 344 | .set_voltage = da9034_set_ldo12_voltage, |
| 345 | .get_voltage = da9034_get_ldo12_voltage, |
| 346 | .enable = da903x_enable, |
| 347 | .disable = da903x_disable, |
| 348 | .is_enabled = da903x_is_enabled, |
| 349 | }; |
| 350 | |
| 351 | #define DA903x_LDO(_pmic, _id, min, max, step, vreg, shift, nbits, ereg, ebit) \ |
| 352 | { \ |
| 353 | .desc = { \ |
| 354 | .name = "LDO" #_id, \ |
| 355 | .ops = &da903x_regulator_ldo_ops, \ |
| 356 | .type = REGULATOR_VOLTAGE, \ |
| 357 | .id = _pmic##_ID_LDO##_id, \ |
| 358 | .owner = THIS_MODULE, \ |
| 359 | }, \ |
| 360 | .min_uV = (min) * 1000, \ |
| 361 | .max_uV = (max) * 1000, \ |
| 362 | .step_uV = (step) * 1000, \ |
| 363 | .vol_reg = _pmic##_##vreg, \ |
| 364 | .vol_shift = (shift), \ |
| 365 | .vol_nbits = (nbits), \ |
| 366 | .enable_reg = _pmic##_##ereg, \ |
| 367 | .enable_bit = (ebit), \ |
| 368 | } |
| 369 | |
| 370 | #define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ |
| 371 | { \ |
| 372 | .desc = { \ |
| 373 | .name = #_id, \ |
| 374 | .ops = &da9034_regulator_dvc_ops, \ |
| 375 | .type = REGULATOR_VOLTAGE, \ |
| 376 | .id = DA9034_ID_##_id, \ |
| 377 | .owner = THIS_MODULE, \ |
| 378 | }, \ |
| 379 | .min_uV = (min) * 1000, \ |
| 380 | .max_uV = (max) * 1000, \ |
| 381 | .step_uV = (step) * 1000, \ |
| 382 | .vol_reg = DA9034_##vreg, \ |
| 383 | .vol_shift = (0), \ |
| 384 | .vol_nbits = (nbits), \ |
| 385 | .update_reg = DA9034_##ureg, \ |
| 386 | .update_bit = (ubit), \ |
| 387 | .enable_reg = DA9034_##ereg, \ |
| 388 | .enable_bit = (ebit), \ |
| 389 | } |
| 390 | |
| 391 | #define DA9034_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ |
| 392 | DA903x_LDO(DA9034, _id, min, max, step, vreg, shift, nbits, ereg, ebit) |
| 393 | |
| 394 | #define DA9030_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ |
| 395 | DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit) |
| 396 | |
| 397 | static struct da903x_regulator_info da903x_regulator_info[] = { |
| 398 | /* DA9030 */ |
| 399 | DA9030_LDO( 1, 1200, 3200, 100, LDO1, 0, 5, RCTL12, 1), |
| 400 | DA9030_LDO( 2, 1800, 3200, 100, LDO23, 0, 4, RCTL12, 2), |
| 401 | DA9030_LDO( 3, 1800, 3200, 100, LDO23, 4, 4, RCTL12, 3), |
| 402 | DA9030_LDO( 4, 1800, 3200, 100, LDO45, 0, 4, RCTL12, 4), |
| 403 | DA9030_LDO( 5, 1800, 3200, 100, LDO45, 4, 4, RCTL12, 5), |
| 404 | DA9030_LDO( 6, 1800, 3200, 100, LDO6, 0, 4, RCTL12, 6), |
| 405 | DA9030_LDO( 7, 1800, 3200, 100, LDO78, 0, 4, RCTL12, 7), |
| 406 | DA9030_LDO( 8, 1800, 3200, 100, LDO78, 4, 4, RCTL22, 0), |
| 407 | DA9030_LDO( 9, 1800, 3200, 100, LDO912, 0, 4, RCTL22, 1), |
| 408 | DA9030_LDO(10, 1800, 3200, 100, LDO1011, 0, 4, RCTL22, 2), |
| 409 | DA9030_LDO(11, 1800, 3200, 100, LDO1011, 4, 4, RCTL22, 3), |
| 410 | DA9030_LDO(12, 1800, 3200, 100, LDO912, 4, 4, RCTL22, 4), |
| 411 | DA9030_LDO(14, 2760, 2940, 30, LDO1416, 0, 3, RCTL11, 4), |
| 412 | DA9030_LDO(15, 1100, 2650, 50, LDO15, 0, 5, RCTL11, 5), |
| 413 | DA9030_LDO(16, 1100, 2650, 50, LDO1416, 3, 5, RCTL11, 6), |
| 414 | DA9030_LDO(17, 1800, 3200, 100, LDO17, 0, 4, RCTL11, 7), |
| 415 | DA9030_LDO(18, 1800, 3200, 100, LDO1819, 0, 4, RCTL21, 2), |
| 416 | DA9030_LDO(19, 1800, 3200, 100, LDO1819, 4, 4, RCTL21, 1), |
| 417 | DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */ |
| 418 | |
| 419 | /* DA9034 */ |
| 420 | DA9034_DVC(BUCK1, 725, 1500, 25, ADTV1, 5, VCC1, 0, OVER1, 0), |
| 421 | DA9034_DVC(BUCK2, 725, 1500, 25, CDTV1, 5, VCC1, 2, OVER1, 1), |
| 422 | DA9034_DVC(LDO2, 725, 1500, 25, SDTV1, 5, VCC1, 4, OVER1, 2), |
| 423 | DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4), |
| 424 | |
| 425 | DA9034_LDO( 3, 1800, 3300, 100, LDO643, 0, 4, OVER3, 5), |
| 426 | DA9034_LDO( 4, 1800, 2900,1100, LDO643, 4, 1, OVER3, 6), |
| 427 | DA9034_LDO( 6, 2500, 2850, 50, LDO643, 5, 3, OVER2, 0), |
| 428 | DA9034_LDO( 7, 2700, 3050, 50, LDO987, 0, 3, OVER2, 1), |
| 429 | DA9034_LDO( 8, 2700, 2850, 50, LDO987, 3, 2, OVER2, 2), |
| 430 | DA9034_LDO( 9, 2700, 3050, 50, LDO987, 5, 3, OVER2, 3), |
| 431 | DA9034_LDO(10, 2700, 3050, 50, LDO1110, 0, 3, OVER2, 4), |
| 432 | DA9034_LDO(11, 1800, 3300, 100, LDO1110, 4, 4, OVER2, 5), |
| 433 | DA9034_LDO(12, 1700, 3050, 50, LDO1312, 0, 4, OVER3, 6), |
| 434 | DA9034_LDO(13, 1800, 3300, 100, LDO1312, 4, 4, OVER2, 7), |
| 435 | DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0), |
| 436 | DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1), |
| 437 | DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */ |
| 438 | }; |
| 439 | |
| 440 | static inline struct da903x_regulator_info *find_regulator_info(int id) |
| 441 | { |
| 442 | struct da903x_regulator_info *ri; |
| 443 | int i; |
| 444 | |
| 445 | for (i = 0; i < ARRAY_SIZE(da903x_regulator_info); i++) { |
| 446 | ri = &da903x_regulator_info[i]; |
| 447 | if (ri->desc.id == id) |
| 448 | return ri; |
| 449 | } |
| 450 | return NULL; |
| 451 | } |
| 452 | |
| 453 | static int __devinit da903x_regulator_probe(struct platform_device *pdev) |
| 454 | { |
| 455 | struct da903x_regulator_info *ri = NULL; |
| 456 | struct regulator_dev *rdev; |
| 457 | |
| 458 | ri = find_regulator_info(pdev->id); |
| 459 | if (ri == NULL) { |
| 460 | dev_err(&pdev->dev, "invalid regulator ID specified\n"); |
| 461 | return -EINVAL; |
| 462 | } |
| 463 | |
| 464 | /* Workaround for the weird LDO12 voltage setting */ |
| 465 | if (ri->desc.id == DA9034_ID_LDO12) |
| 466 | ri->desc.ops = &da9034_regulator_ldo12_ops; |
| 467 | |
| 468 | if (ri->desc.id == DA9030_ID_LDO14) |
| 469 | ri->desc.ops = &da9030_regulator_ldo14_ops; |
| 470 | |
| 471 | if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15) |
| 472 | ri->desc.ops = &da9030_regulator_ldo1_15_ops; |
| 473 | |
Mark Brown | 0527100 | 2009-01-19 13:37:02 +0000 | [diff] [blame] | 474 | rdev = regulator_register(&ri->desc, &pdev->dev, |
| 475 | pdev->dev.platform_data, ri); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 476 | if (IS_ERR(rdev)) { |
| 477 | dev_err(&pdev->dev, "failed to register regulator %s\n", |
| 478 | ri->desc.name); |
| 479 | return PTR_ERR(rdev); |
| 480 | } |
| 481 | |
| 482 | platform_set_drvdata(pdev, rdev); |
| 483 | return 0; |
| 484 | } |
| 485 | |
| 486 | static int __devexit da903x_regulator_remove(struct platform_device *pdev) |
| 487 | { |
| 488 | struct regulator_dev *rdev = platform_get_drvdata(pdev); |
| 489 | |
| 490 | regulator_unregister(rdev); |
| 491 | return 0; |
| 492 | } |
| 493 | |
| 494 | static struct platform_driver da903x_regulator_driver = { |
| 495 | .driver = { |
| 496 | .name = "da903x-regulator", |
| 497 | .owner = THIS_MODULE, |
| 498 | }, |
| 499 | .probe = da903x_regulator_probe, |
Mike Frysinger | 5b4662f | 2009-05-15 14:50:33 -0400 | [diff] [blame] | 500 | .remove = __devexit_p(da903x_regulator_remove), |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 501 | }; |
| 502 | |
| 503 | static int __init da903x_regulator_init(void) |
| 504 | { |
| 505 | return platform_driver_register(&da903x_regulator_driver); |
| 506 | } |
Mark Brown | 5a1b22b | 2009-04-27 18:21:18 +0100 | [diff] [blame] | 507 | subsys_initcall(da903x_regulator_init); |
Eric Miao | 129eef9 | 2008-08-27 04:16:08 +0800 | [diff] [blame] | 508 | |
| 509 | static void __exit da903x_regulator_exit(void) |
| 510 | { |
| 511 | platform_driver_unregister(&da903x_regulator_driver); |
| 512 | } |
| 513 | module_exit(da903x_regulator_exit); |
| 514 | |
| 515 | MODULE_LICENSE("GPL"); |
| 516 | MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>" |
| 517 | "Mike Rapoport <mike@compulab.co.il>"); |
| 518 | MODULE_DESCRIPTION("Regulator Driver for Dialog Semiconductor DA903X PMIC"); |
| 519 | MODULE_ALIAS("platform:da903x-regulator"); |