| Vineet Gupta | 5fa2daa | 2015-03-09 14:33:40 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | */ |
| 8 | |
| 9 | /* |
| 10 | * Device tree for AXC003 CPU card: HS38x UP configuration |
| 11 | */ |
| 12 | |
| 13 | / { |
| 14 | compatible = "snps,arc"; |
| 15 | clock-frequency = <75000000>; |
| 16 | #address-cells = <1>; |
| 17 | #size-cells = <1>; |
| 18 | |
| 19 | cpu_card { |
| 20 | compatible = "simple-bus"; |
| 21 | #address-cells = <1>; |
| 22 | #size-cells = <1>; |
| 23 | |
| 24 | ranges = <0x00000000 0xf0000000 0x10000000>; |
| 25 | |
| 26 | cpu_intc: archs-intc@cpu { |
| 27 | compatible = "snps,archs-intc"; |
| 28 | interrupt-controller; |
| 29 | #interrupt-cells = <1>; |
| 30 | }; |
| 31 | |
| 32 | /* |
| 33 | * this GPIO block ORs all interrupts on CPU card (creg,..) |
| 34 | * to uplink only 1 IRQ to ARC core intc |
| 35 | */ |
| 36 | dw-apb-gpio@0x2000 { |
| 37 | compatible = "snps,dw-apb-gpio"; |
| 38 | reg = < 0x2000 0x80 >; |
| 39 | #address-cells = <1>; |
| 40 | #size-cells = <0>; |
| 41 | |
| 42 | ictl_intc: gpio-controller@0 { |
| 43 | compatible = "snps,dw-apb-gpio-port"; |
| 44 | gpio-controller; |
| 45 | #gpio-cells = <2>; |
| 46 | snps,nr-gpios = <30>; |
| 47 | reg = <0>; |
| 48 | interrupt-controller; |
| 49 | #interrupt-cells = <2>; |
| 50 | interrupt-parent = <&cpu_intc>; |
| 51 | interrupts = <25>; |
| 52 | }; |
| 53 | }; |
| 54 | |
| 55 | debug_uart: dw-apb-uart@0x5000 { |
| 56 | compatible = "snps,dw-apb-uart"; |
| 57 | reg = <0x5000 0x100>; |
| 58 | clock-frequency = <33333000>; |
| 59 | interrupt-parent = <&ictl_intc>; |
| 60 | interrupts = <2 4>; |
| 61 | baud = <115200>; |
| 62 | reg-shift = <2>; |
| 63 | reg-io-width = <4>; |
| 64 | }; |
| 65 | |
| 66 | arcpct0: pct { |
| 67 | compatible = "snps,archs-pct"; |
| 68 | #interrupt-cells = <1>; |
| 69 | interrupt-parent = <&cpu_intc>; |
| 70 | interrupts = <20>; |
| 71 | }; |
| 72 | }; |
| 73 | |
| 74 | /* |
| 75 | * This INTC is actually connected to DW APB GPIO |
| 76 | * which acts as a wire between MB INTC and CPU INTC. |
| 77 | * GPIO INTC is configured in platform init code |
| 78 | * and here we mimic direct connection from MB INTC to |
| 79 | * CPU INTC, thus we set "interrupts = <7>" instead of |
| 80 | * "interrupts = <12>" |
| 81 | * |
| 82 | * This intc actually resides on MB, but we move it here to |
| 83 | * avoid duplicating the MB dtsi file given that IRQ from |
| 84 | * this intc to cpu intc are different for axs101 and axs103 |
| 85 | */ |
| 86 | mb_intc: dw-apb-ictl@0xe0012000 { |
| 87 | #interrupt-cells = <1>; |
| 88 | compatible = "snps,dw-apb-ictl"; |
| 89 | reg = < 0xe0012000 0x200 >; |
| 90 | interrupt-controller; |
| 91 | interrupt-parent = <&cpu_intc>; |
| 92 | interrupts = < 24 >; |
| 93 | }; |
| 94 | |
| 95 | memory { |
| 96 | #address-cells = <1>; |
| 97 | #size-cells = <1>; |
| 98 | ranges = <0x00000000 0x80000000 0x40000000>; |
| 99 | device_type = "memory"; |
| 100 | reg = <0x00000000 0x20000000>; /* 512MiB */ |
| 101 | }; |
| 102 | }; |