blob: dac6d85f2fd95607c4b181afa3891c8a8f53d098 [file] [log] [blame]
stigge@antcom.dea5b79d62011-01-20 18:42:55 +01001/*
2 * max6639.c - Support for Maxim MAX6639
3 *
4 * 2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller
5 *
6 * Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
7 *
8 * based on the initial MAX6639 support from semptian.net
9 * by He Changqing <hechangqing@semptian.com>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 */
25
26#include <linux/module.h>
27#include <linux/init.h>
28#include <linux/slab.h>
29#include <linux/jiffies.h>
30#include <linux/i2c.h>
31#include <linux/hwmon.h>
32#include <linux/hwmon-sysfs.h>
33#include <linux/err.h>
34#include <linux/mutex.h>
35#include <linux/i2c/max6639.h>
36
37/* Addresses to scan */
Axel Lin7edc8cc2014-07-18 15:56:59 +080038static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
stigge@antcom.dea5b79d62011-01-20 18:42:55 +010039
40/* The MAX6639 registers, valid channel numbers: 0, 1 */
41#define MAX6639_REG_TEMP(ch) (0x00 + (ch))
42#define MAX6639_REG_STATUS 0x02
43#define MAX6639_REG_OUTPUT_MASK 0x03
44#define MAX6639_REG_GCONFIG 0x04
45#define MAX6639_REG_TEMP_EXT(ch) (0x05 + (ch))
46#define MAX6639_REG_ALERT_LIMIT(ch) (0x08 + (ch))
47#define MAX6639_REG_OT_LIMIT(ch) (0x0A + (ch))
48#define MAX6639_REG_THERM_LIMIT(ch) (0x0C + (ch))
49#define MAX6639_REG_FAN_CONFIG1(ch) (0x10 + (ch) * 4)
50#define MAX6639_REG_FAN_CONFIG2a(ch) (0x11 + (ch) * 4)
51#define MAX6639_REG_FAN_CONFIG2b(ch) (0x12 + (ch) * 4)
52#define MAX6639_REG_FAN_CONFIG3(ch) (0x13 + (ch) * 4)
53#define MAX6639_REG_FAN_CNT(ch) (0x20 + (ch))
54#define MAX6639_REG_TARGET_CNT(ch) (0x22 + (ch))
55#define MAX6639_REG_FAN_PPR(ch) (0x24 + (ch))
56#define MAX6639_REG_TARGTDUTY(ch) (0x26 + (ch))
57#define MAX6639_REG_FAN_START_TEMP(ch) (0x28 + (ch))
58#define MAX6639_REG_DEVID 0x3D
59#define MAX6639_REG_MANUID 0x3E
60#define MAX6639_REG_DEVREV 0x3F
61
62/* Register bits */
63#define MAX6639_GCONFIG_STANDBY 0x80
64#define MAX6639_GCONFIG_POR 0x40
65#define MAX6639_GCONFIG_DISABLE_TIMEOUT 0x20
66#define MAX6639_GCONFIG_CH2_LOCAL 0x10
stigge@antcom.de177f3b92011-01-29 17:04:01 +010067#define MAX6639_GCONFIG_PWM_FREQ_HI 0x08
stigge@antcom.dea5b79d62011-01-20 18:42:55 +010068
69#define MAX6639_FAN_CONFIG1_PWM 0x80
70
stigge@antcom.de177f3b92011-01-29 17:04:01 +010071#define MAX6639_FAN_CONFIG3_THERM_FULL_SPEED 0x40
72
stigge@antcom.dea5b79d62011-01-20 18:42:55 +010073static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
74
Chris D Schimpb63d97a2012-02-20 16:59:24 -050075#define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \
76 0 : (rpm_ranges[rpm_range] * 30) / (val))
Guenter Roeck2a844c12013-01-09 08:09:34 -080077#define TEMP_LIMIT_TO_REG(val) clamp_val((val) / 1000, 0, 255)
stigge@antcom.dea5b79d62011-01-20 18:42:55 +010078
79/*
80 * Client data (each client gets its own)
81 */
82struct max6639_data {
Guenter Roeck7981c582014-02-17 10:34:29 -080083 struct i2c_client *client;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +010084 struct mutex update_lock;
85 char valid; /* !=0 if following fields are valid */
86 unsigned long last_updated; /* In jiffies */
87
88 /* Register values sampled regularly */
89 u16 temp[2]; /* Temperature, in 1/8 C, 0..255 C */
90 bool temp_fault[2]; /* Detected temperature diode failure */
91 u8 fan[2]; /* Register value: TACH count for fans >=30 */
92 u8 status; /* Detected channel alarms and fan failures */
93
94 /* Register values only written to */
95 u8 pwm[2]; /* Register value: Duty cycle 0..120 */
96 u8 temp_therm[2]; /* THERM Temperature, 0..255 C (->_max) */
97 u8 temp_alert[2]; /* ALERT Temperature, 0..255 C (->_crit) */
98 u8 temp_ot[2]; /* OT Temperature, 0..255 C (->_emergency) */
99
100 /* Register values initialized only once */
101 u8 ppr; /* Pulses per rotation 0..3 for 1..4 ppr */
102 u8 rpm_range; /* Index in above rpm_ranges table */
103};
104
105static struct max6639_data *max6639_update_device(struct device *dev)
106{
Guenter Roeck7981c582014-02-17 10:34:29 -0800107 struct max6639_data *data = dev_get_drvdata(dev);
108 struct i2c_client *client = data->client;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100109 struct max6639_data *ret = data;
110 int i;
111 int status_reg;
112
113 mutex_lock(&data->update_lock);
114
115 if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
116 int res;
117
118 dev_dbg(&client->dev, "Starting max6639 update\n");
119
120 status_reg = i2c_smbus_read_byte_data(client,
121 MAX6639_REG_STATUS);
122 if (status_reg < 0) {
123 ret = ERR_PTR(status_reg);
124 goto abort;
125 }
126
127 data->status = status_reg;
128
129 for (i = 0; i < 2; i++) {
130 res = i2c_smbus_read_byte_data(client,
131 MAX6639_REG_FAN_CNT(i));
132 if (res < 0) {
133 ret = ERR_PTR(res);
134 goto abort;
135 }
136 data->fan[i] = res;
137
138 res = i2c_smbus_read_byte_data(client,
139 MAX6639_REG_TEMP_EXT(i));
140 if (res < 0) {
141 ret = ERR_PTR(res);
142 goto abort;
143 }
144 data->temp[i] = res >> 5;
145 data->temp_fault[i] = res & 0x01;
146
147 res = i2c_smbus_read_byte_data(client,
148 MAX6639_REG_TEMP(i));
149 if (res < 0) {
150 ret = ERR_PTR(res);
151 goto abort;
152 }
153 data->temp[i] |= res << 3;
154 }
155
156 data->last_updated = jiffies;
157 data->valid = 1;
158 }
159abort:
160 mutex_unlock(&data->update_lock);
161
162 return ret;
163}
164
165static ssize_t show_temp_input(struct device *dev,
166 struct device_attribute *dev_attr, char *buf)
167{
168 long temp;
169 struct max6639_data *data = max6639_update_device(dev);
170 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
171
172 if (IS_ERR(data))
173 return PTR_ERR(data);
174
175 temp = data->temp[attr->index] * 125;
176 return sprintf(buf, "%ld\n", temp);
177}
178
179static ssize_t show_temp_fault(struct device *dev,
180 struct device_attribute *dev_attr, char *buf)
181{
182 struct max6639_data *data = max6639_update_device(dev);
183 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
184
185 if (IS_ERR(data))
186 return PTR_ERR(data);
187
188 return sprintf(buf, "%d\n", data->temp_fault[attr->index]);
189}
190
191static ssize_t show_temp_max(struct device *dev,
192 struct device_attribute *dev_attr, char *buf)
193{
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100194 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
Guenter Roeck7981c582014-02-17 10:34:29 -0800195 struct max6639_data *data = dev_get_drvdata(dev);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100196
197 return sprintf(buf, "%d\n", (data->temp_therm[attr->index] * 1000));
198}
199
200static ssize_t set_temp_max(struct device *dev,
201 struct device_attribute *dev_attr,
202 const char *buf, size_t count)
203{
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100204 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
Guenter Roeck7981c582014-02-17 10:34:29 -0800205 struct max6639_data *data = dev_get_drvdata(dev);
206 struct i2c_client *client = data->client;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100207 unsigned long val;
208 int res;
209
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100210 res = kstrtoul(buf, 10, &val);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100211 if (res)
212 return res;
213
214 mutex_lock(&data->update_lock);
215 data->temp_therm[attr->index] = TEMP_LIMIT_TO_REG(val);
216 i2c_smbus_write_byte_data(client,
217 MAX6639_REG_THERM_LIMIT(attr->index),
218 data->temp_therm[attr->index]);
219 mutex_unlock(&data->update_lock);
220 return count;
221}
222
223static ssize_t show_temp_crit(struct device *dev,
224 struct device_attribute *dev_attr, char *buf)
225{
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100226 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
Guenter Roeck7981c582014-02-17 10:34:29 -0800227 struct max6639_data *data = dev_get_drvdata(dev);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100228
229 return sprintf(buf, "%d\n", (data->temp_alert[attr->index] * 1000));
230}
231
232static ssize_t set_temp_crit(struct device *dev,
233 struct device_attribute *dev_attr,
234 const char *buf, size_t count)
235{
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100236 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
Guenter Roeck7981c582014-02-17 10:34:29 -0800237 struct max6639_data *data = dev_get_drvdata(dev);
238 struct i2c_client *client = data->client;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100239 unsigned long val;
240 int res;
241
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100242 res = kstrtoul(buf, 10, &val);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100243 if (res)
244 return res;
245
246 mutex_lock(&data->update_lock);
247 data->temp_alert[attr->index] = TEMP_LIMIT_TO_REG(val);
248 i2c_smbus_write_byte_data(client,
249 MAX6639_REG_ALERT_LIMIT(attr->index),
250 data->temp_alert[attr->index]);
251 mutex_unlock(&data->update_lock);
252 return count;
253}
254
255static ssize_t show_temp_emergency(struct device *dev,
256 struct device_attribute *dev_attr,
257 char *buf)
258{
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100259 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
Guenter Roeck7981c582014-02-17 10:34:29 -0800260 struct max6639_data *data = dev_get_drvdata(dev);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100261
262 return sprintf(buf, "%d\n", (data->temp_ot[attr->index] * 1000));
263}
264
265static ssize_t set_temp_emergency(struct device *dev,
266 struct device_attribute *dev_attr,
267 const char *buf, size_t count)
268{
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100269 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
Guenter Roeck7981c582014-02-17 10:34:29 -0800270 struct max6639_data *data = dev_get_drvdata(dev);
271 struct i2c_client *client = data->client;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100272 unsigned long val;
273 int res;
274
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100275 res = kstrtoul(buf, 10, &val);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100276 if (res)
277 return res;
278
279 mutex_lock(&data->update_lock);
280 data->temp_ot[attr->index] = TEMP_LIMIT_TO_REG(val);
281 i2c_smbus_write_byte_data(client,
282 MAX6639_REG_OT_LIMIT(attr->index),
283 data->temp_ot[attr->index]);
284 mutex_unlock(&data->update_lock);
285 return count;
286}
287
288static ssize_t show_pwm(struct device *dev,
289 struct device_attribute *dev_attr, char *buf)
290{
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100291 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
Guenter Roeck7981c582014-02-17 10:34:29 -0800292 struct max6639_data *data = dev_get_drvdata(dev);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100293
294 return sprintf(buf, "%d\n", data->pwm[attr->index] * 255 / 120);
295}
296
297static ssize_t set_pwm(struct device *dev,
298 struct device_attribute *dev_attr,
299 const char *buf, size_t count)
300{
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100301 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
Guenter Roeck7981c582014-02-17 10:34:29 -0800302 struct max6639_data *data = dev_get_drvdata(dev);
303 struct i2c_client *client = data->client;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100304 unsigned long val;
305 int res;
306
Frans Meulenbroeks179c4fd2012-01-04 20:58:52 +0100307 res = kstrtoul(buf, 10, &val);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100308 if (res)
309 return res;
310
Guenter Roeck2a844c12013-01-09 08:09:34 -0800311 val = clamp_val(val, 0, 255);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100312
313 mutex_lock(&data->update_lock);
314 data->pwm[attr->index] = (u8)(val * 120 / 255);
315 i2c_smbus_write_byte_data(client,
316 MAX6639_REG_TARGTDUTY(attr->index),
317 data->pwm[attr->index]);
318 mutex_unlock(&data->update_lock);
319 return count;
320}
321
322static ssize_t show_fan_input(struct device *dev,
323 struct device_attribute *dev_attr, char *buf)
324{
325 struct max6639_data *data = max6639_update_device(dev);
326 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
327
328 if (IS_ERR(data))
329 return PTR_ERR(data);
330
331 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
Chris D Schimpb63d97a2012-02-20 16:59:24 -0500332 data->rpm_range));
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100333}
334
335static ssize_t show_alarm(struct device *dev,
336 struct device_attribute *dev_attr, char *buf)
337{
338 struct max6639_data *data = max6639_update_device(dev);
339 struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
340
341 if (IS_ERR(data))
342 return PTR_ERR(data);
343
344 return sprintf(buf, "%d\n", !!(data->status & (1 << attr->index)));
345}
346
347static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0);
348static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input, NULL, 1);
349static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0);
350static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1);
351static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
352 set_temp_max, 0);
353static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
354 set_temp_max, 1);
355static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_crit,
356 set_temp_crit, 0);
357static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit,
358 set_temp_crit, 1);
359static SENSOR_DEVICE_ATTR(temp1_emergency, S_IWUSR | S_IRUGO,
360 show_temp_emergency, set_temp_emergency, 0);
361static SENSOR_DEVICE_ATTR(temp2_emergency, S_IWUSR | S_IRUGO,
362 show_temp_emergency, set_temp_emergency, 1);
363static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
364static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
365static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
366static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
367static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_alarm, NULL, 1);
368static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_alarm, NULL, 0);
369static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 3);
370static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 2);
371static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 7);
372static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 6);
373static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, show_alarm, NULL, 5);
374static SENSOR_DEVICE_ATTR(temp2_emergency_alarm, S_IRUGO, show_alarm, NULL, 4);
375
376
Guenter Roeck7981c582014-02-17 10:34:29 -0800377static struct attribute *max6639_attrs[] = {
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100378 &sensor_dev_attr_temp1_input.dev_attr.attr,
379 &sensor_dev_attr_temp2_input.dev_attr.attr,
380 &sensor_dev_attr_temp1_fault.dev_attr.attr,
381 &sensor_dev_attr_temp2_fault.dev_attr.attr,
382 &sensor_dev_attr_temp1_max.dev_attr.attr,
383 &sensor_dev_attr_temp2_max.dev_attr.attr,
384 &sensor_dev_attr_temp1_crit.dev_attr.attr,
385 &sensor_dev_attr_temp2_crit.dev_attr.attr,
386 &sensor_dev_attr_temp1_emergency.dev_attr.attr,
387 &sensor_dev_attr_temp2_emergency.dev_attr.attr,
388 &sensor_dev_attr_pwm1.dev_attr.attr,
389 &sensor_dev_attr_pwm2.dev_attr.attr,
390 &sensor_dev_attr_fan1_input.dev_attr.attr,
391 &sensor_dev_attr_fan2_input.dev_attr.attr,
392 &sensor_dev_attr_fan1_fault.dev_attr.attr,
393 &sensor_dev_attr_fan2_fault.dev_attr.attr,
394 &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
395 &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
396 &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
397 &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
398 &sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr,
399 &sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr,
400 NULL
401};
Guenter Roeck7981c582014-02-17 10:34:29 -0800402ATTRIBUTE_GROUPS(max6639);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100403
404/*
405 * returns respective index in rpm_ranges table
406 * 1 by default on invalid range
407 */
408static int rpm_range_to_reg(int range)
409{
410 int i;
411
412 for (i = 0; i < ARRAY_SIZE(rpm_ranges); i++) {
413 if (rpm_ranges[i] == range)
414 return i;
415 }
416
417 return 1; /* default: 4000 RPM */
418}
419
Guenter Roeck7981c582014-02-17 10:34:29 -0800420static int max6639_init_client(struct i2c_client *client,
421 struct max6639_data *data)
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100422{
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100423 struct max6639_platform_data *max6639_info =
Jingoo Hana8b3a3a2013-07-30 17:13:06 +0900424 dev_get_platdata(&client->dev);
Chris D Schimp2f2da1a2012-02-20 17:44:59 -0500425 int i;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100426 int rpm_range = 1; /* default: 4000 RPM */
Chris D Schimp2f2da1a2012-02-20 17:44:59 -0500427 int err;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100428
stigge@antcom.de177f3b92011-01-29 17:04:01 +0100429 /* Reset chip to default values, see below for GCONFIG setup */
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100430 err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
431 MAX6639_GCONFIG_POR);
432 if (err)
433 goto exit;
434
435 /* Fans pulse per revolution is 2 by default */
436 if (max6639_info && max6639_info->ppr > 0 &&
437 max6639_info->ppr < 5)
438 data->ppr = max6639_info->ppr;
439 else
440 data->ppr = 2;
441 data->ppr -= 1;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100442
443 if (max6639_info)
444 rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
445 data->rpm_range = rpm_range;
446
447 for (i = 0; i < 2; i++) {
448
Chris D Schimp2f2da1a2012-02-20 17:44:59 -0500449 /* Set Fan pulse per revolution */
450 err = i2c_smbus_write_byte_data(client,
451 MAX6639_REG_FAN_PPR(i),
452 data->ppr << 6);
453 if (err)
454 goto exit;
455
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100456 /* Fans config PWM, RPM */
457 err = i2c_smbus_write_byte_data(client,
458 MAX6639_REG_FAN_CONFIG1(i),
459 MAX6639_FAN_CONFIG1_PWM | rpm_range);
460 if (err)
461 goto exit;
462
463 /* Fans PWM polarity high by default */
464 if (max6639_info && max6639_info->pwm_polarity == 0)
465 err = i2c_smbus_write_byte_data(client,
466 MAX6639_REG_FAN_CONFIG2a(i), 0x00);
467 else
468 err = i2c_smbus_write_byte_data(client,
469 MAX6639_REG_FAN_CONFIG2a(i), 0x02);
470 if (err)
471 goto exit;
472
stigge@antcom.de177f3b92011-01-29 17:04:01 +0100473 /*
474 * /THERM full speed enable,
475 * PWM frequency 25kHz, see also GCONFIG below
476 */
477 err = i2c_smbus_write_byte_data(client,
478 MAX6639_REG_FAN_CONFIG3(i),
479 MAX6639_FAN_CONFIG3_THERM_FULL_SPEED | 0x03);
480 if (err)
481 goto exit;
482
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100483 /* Max. temp. 80C/90C/100C */
484 data->temp_therm[i] = 80;
485 data->temp_alert[i] = 90;
486 data->temp_ot[i] = 100;
487 err = i2c_smbus_write_byte_data(client,
488 MAX6639_REG_THERM_LIMIT(i),
489 data->temp_therm[i]);
490 if (err)
491 goto exit;
492 err = i2c_smbus_write_byte_data(client,
493 MAX6639_REG_ALERT_LIMIT(i),
494 data->temp_alert[i]);
495 if (err)
496 goto exit;
497 err = i2c_smbus_write_byte_data(client,
498 MAX6639_REG_OT_LIMIT(i), data->temp_ot[i]);
499 if (err)
500 goto exit;
501
502 /* PWM 120/120 (i.e. 100%) */
503 data->pwm[i] = 120;
504 err = i2c_smbus_write_byte_data(client,
505 MAX6639_REG_TARGTDUTY(i), data->pwm[i]);
506 if (err)
507 goto exit;
508 }
509 /* Start monitoring */
510 err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
stigge@antcom.de177f3b92011-01-29 17:04:01 +0100511 MAX6639_GCONFIG_DISABLE_TIMEOUT | MAX6639_GCONFIG_CH2_LOCAL |
512 MAX6639_GCONFIG_PWM_FREQ_HI);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100513exit:
514 return err;
515}
516
517/* Return 0 if detection is successful, -ENODEV otherwise */
518static int max6639_detect(struct i2c_client *client,
519 struct i2c_board_info *info)
520{
521 struct i2c_adapter *adapter = client->adapter;
522 int dev_id, manu_id;
523
524 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
525 return -ENODEV;
526
527 /* Actual detection via device and manufacturer ID */
528 dev_id = i2c_smbus_read_byte_data(client, MAX6639_REG_DEVID);
529 manu_id = i2c_smbus_read_byte_data(client, MAX6639_REG_MANUID);
530 if (dev_id != 0x58 || manu_id != 0x4D)
531 return -ENODEV;
532
533 strlcpy(info->type, "max6639", I2C_NAME_SIZE);
534
535 return 0;
536}
537
538static int max6639_probe(struct i2c_client *client,
539 const struct i2c_device_id *id)
540{
Guenter Roeckc1ea0a02014-02-17 10:21:26 -0800541 struct device *dev = &client->dev;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100542 struct max6639_data *data;
Guenter Roeck7981c582014-02-17 10:34:29 -0800543 struct device *hwmon_dev;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100544 int err;
545
Guenter Roeckc1ea0a02014-02-17 10:21:26 -0800546 data = devm_kzalloc(dev, sizeof(struct max6639_data), GFP_KERNEL);
Guenter Roeckb07405f2012-06-02 09:58:13 -0700547 if (!data)
548 return -ENOMEM;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100549
Guenter Roeck7981c582014-02-17 10:34:29 -0800550 data->client = client;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100551 mutex_init(&data->update_lock);
552
553 /* Initialize the max6639 chip */
Guenter Roeck7981c582014-02-17 10:34:29 -0800554 err = max6639_init_client(client, data);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100555 if (err < 0)
Guenter Roeckb07405f2012-06-02 09:58:13 -0700556 return err;
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100557
Guenter Roeck7981c582014-02-17 10:34:29 -0800558 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
559 data,
560 max6639_groups);
561 return PTR_ERR_OR_ZERO(hwmon_dev);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100562}
563
Mark Brown52f30f72012-03-22 16:23:58 -0400564#ifdef CONFIG_PM_SLEEP
565static int max6639_suspend(struct device *dev)
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100566{
Mark Brown52f30f72012-03-22 16:23:58 -0400567 struct i2c_client *client = to_i2c_client(dev);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100568 int data = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
569 if (data < 0)
570 return data;
571
572 return i2c_smbus_write_byte_data(client,
573 MAX6639_REG_GCONFIG, data | MAX6639_GCONFIG_STANDBY);
574}
575
Mark Brown52f30f72012-03-22 16:23:58 -0400576static int max6639_resume(struct device *dev)
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100577{
Mark Brown52f30f72012-03-22 16:23:58 -0400578 struct i2c_client *client = to_i2c_client(dev);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100579 int data = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
580 if (data < 0)
581 return data;
582
583 return i2c_smbus_write_byte_data(client,
584 MAX6639_REG_GCONFIG, data & ~MAX6639_GCONFIG_STANDBY);
585}
Mark Brown52f30f72012-03-22 16:23:58 -0400586#endif /* CONFIG_PM_SLEEP */
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100587
588static const struct i2c_device_id max6639_id[] = {
589 {"max6639", 0},
590 { }
591};
592
593MODULE_DEVICE_TABLE(i2c, max6639_id);
594
Jingoo Han768821a2014-02-27 20:38:20 +0900595static SIMPLE_DEV_PM_OPS(max6639_pm_ops, max6639_suspend, max6639_resume);
Mark Brown52f30f72012-03-22 16:23:58 -0400596
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100597static struct i2c_driver max6639_driver = {
598 .class = I2C_CLASS_HWMON,
599 .driver = {
600 .name = "max6639",
Mark Brown52f30f72012-03-22 16:23:58 -0400601 .pm = &max6639_pm_ops,
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100602 },
603 .probe = max6639_probe,
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100604 .id_table = max6639_id,
605 .detect = max6639_detect,
606 .address_list = normal_i2c,
607};
608
Axel Linf0967ee2012-01-20 15:38:18 +0800609module_i2c_driver(max6639_driver);
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100610
611MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
612MODULE_DESCRIPTION("max6639 driver");
613MODULE_LICENSE("GPL");