blob: d829a6131f09e5de61ecc02b8727fd225cea5232 [file] [log] [blame]
David Brownell72cd7992005-05-24 17:34:51 -07001/*
2 * tps65010 - driver for tps6501x power management chips
3 *
4 * Copyright (C) 2004 Texas Instruments
5 * Copyright (C) 2004-2005 David Brownell
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
David Brownell72cd7992005-05-24 17:34:51 -070021
David Brownell72cd7992005-05-24 17:34:51 -070022#include <linux/kernel.h>
23#include <linux/module.h>
24#include <linux/init.h>
25#include <linux/slab.h>
26#include <linux/interrupt.h>
David Brownell72cd7992005-05-24 17:34:51 -070027#include <linux/i2c.h>
28#include <linux/delay.h>
29#include <linux/workqueue.h>
David Brownell72cd7992005-05-24 17:34:51 -070030#include <linux/debugfs.h>
31#include <linux/seq_file.h>
Ingo Molnar5c085d32006-01-18 23:16:04 +010032#include <linux/mutex.h>
David Brownell79966fd2008-02-28 22:07:28 -080033#include <linux/platform_device.h>
David Brownell72cd7992005-05-24 17:34:51 -070034
David Brownell6d16bfb2008-01-27 18:14:49 +010035#include <linux/i2c/tps65010.h>
David Brownell72cd7992005-05-24 17:34:51 -070036
Linus Walleij22e5e742016-03-30 10:48:07 +020037#include <linux/gpio/driver.h>
David Brownell79966fd2008-02-28 22:07:28 -080038
39
David Brownell72cd7992005-05-24 17:34:51 -070040/*-------------------------------------------------------------------------*/
41
42#define DRIVER_VERSION "2 May 2005"
David Brownell4801bc22006-08-11 22:53:08 +020043#define DRIVER_NAME (tps65010_driver.driver.name)
David Brownell72cd7992005-05-24 17:34:51 -070044
45MODULE_DESCRIPTION("TPS6501x Power Management Driver");
46MODULE_LICENSE("GPL");
47
David Brownell72cd7992005-05-24 17:34:51 -070048static struct i2c_driver tps65010_driver;
49
50/*-------------------------------------------------------------------------*/
51
52/* This driver handles a family of multipurpose chips, which incorporate
53 * voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs,
54 * and other features often needed in portable devices like cell phones
55 * or digital cameras.
56 *
57 * The tps65011 and tps65013 have different voltage settings compared
58 * to tps65010 and tps65012. The tps65013 has a NO_CHG status/irq.
59 * All except tps65010 have "wait" mode, possibly defaulted so that
60 * battery-insert != device-on.
61 *
62 * We could distinguish between some models by checking VDCDC1.UVLO or
63 * other registers, unless they've been changed already after powerup
64 * as part of board setup by a bootloader.
65 */
66enum tps_model {
David Brownell72cd7992005-05-24 17:34:51 -070067 TPS65010,
68 TPS65011,
69 TPS65012,
70 TPS65013,
71};
72
73struct tps65010 {
David Brownellb5067f82007-10-13 23:56:30 +020074 struct i2c_client *client;
Ingo Molnar5c085d32006-01-18 23:16:04 +010075 struct mutex lock;
David Brownell8c1bc042006-12-13 00:33:46 -080076 struct delayed_work work;
David Brownell72cd7992005-05-24 17:34:51 -070077 struct dentry *file;
78 unsigned charging:1;
79 unsigned por:1;
80 unsigned model:8;
81 u16 vbus;
82 unsigned long flags;
83#define FLAG_VBUS_CHANGED 0
84#define FLAG_IRQ_ENABLE 1
85
86 /* copies of last register state */
87 u8 chgstatus, regstatus, chgconf;
88 u8 nmask1, nmask2;
89
David Brownell79966fd2008-02-28 22:07:28 -080090 u8 outmask;
91 struct gpio_chip chip;
92 struct platform_device *leds;
David Brownell72cd7992005-05-24 17:34:51 -070093};
94
David Brownell4801bc22006-08-11 22:53:08 +020095#define POWER_POLL_DELAY msecs_to_jiffies(5000)
David Brownell72cd7992005-05-24 17:34:51 -070096
97/*-------------------------------------------------------------------------*/
98
99#if defined(DEBUG) || defined(CONFIG_DEBUG_FS)
100
101static void dbg_chgstat(char *buf, size_t len, u8 chgstatus)
102{
103 snprintf(buf, len, "%02x%s%s%s%s%s%s%s%s\n",
104 chgstatus,
105 (chgstatus & TPS_CHG_USB) ? " USB" : "",
106 (chgstatus & TPS_CHG_AC) ? " AC" : "",
107 (chgstatus & TPS_CHG_THERM) ? " therm" : "",
108 (chgstatus & TPS_CHG_TERM) ? " done" :
109 ((chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
110 ? " (charging)" : ""),
111 (chgstatus & TPS_CHG_TAPER_TMO) ? " taper_tmo" : "",
112 (chgstatus & TPS_CHG_CHG_TMO) ? " charge_tmo" : "",
113 (chgstatus & TPS_CHG_PRECHG_TMO) ? " prechg_tmo" : "",
114 (chgstatus & TPS_CHG_TEMP_ERR) ? " temp_err" : "");
115}
116
117static void dbg_regstat(char *buf, size_t len, u8 regstatus)
118{
119 snprintf(buf, len, "%02x %s%s%s%s%s%s%s%s\n",
120 regstatus,
121 (regstatus & TPS_REG_ONOFF) ? "off" : "(on)",
122 (regstatus & TPS_REG_COVER) ? " uncover" : "",
123 (regstatus & TPS_REG_UVLO) ? " UVLO" : "",
124 (regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "",
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700125 (regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "",
David Brownell72cd7992005-05-24 17:34:51 -0700126 (regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "",
127 (regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "",
128 (regstatus & TPS_REG_PG_CORE) ? " core_bad" : "");
129}
130
131static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig)
132{
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700133 const char *hibit;
David Brownell72cd7992005-05-24 17:34:51 -0700134
135 if (por)
136 hibit = (chgconfig & TPS_CHARGE_POR)
137 ? "POR=69ms" : "POR=1sec";
138 else
139 hibit = (chgconfig & TPS65013_AUA) ? "AUA" : "";
140
141 snprintf(buf, len, "%02x %s%s%s AC=%d%% USB=%dmA %sCharge\n",
142 chgconfig, hibit,
143 (chgconfig & TPS_CHARGE_RESET) ? " reset" : "",
144 (chgconfig & TPS_CHARGE_FAST) ? " fast" : "",
145 ({int p; switch ((chgconfig >> 3) & 3) {
146 case 3: p = 100; break;
147 case 2: p = 75; break;
148 case 1: p = 50; break;
149 default: p = 25; break;
150 }; p; }),
151 (chgconfig & TPS_VBUS_CHARGING)
152 ? ((chgconfig & TPS_VBUS_500MA) ? 500 : 100)
153 : 0,
154 (chgconfig & TPS_CHARGE_ENABLE) ? "" : "No");
155}
156
157#endif
158
159#ifdef DEBUG
160
161static void show_chgstatus(const char *label, u8 chgstatus)
162{
163 char buf [100];
164
165 dbg_chgstat(buf, sizeof buf, chgstatus);
166 pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
167}
168
169static void show_regstatus(const char *label, u8 regstatus)
170{
171 char buf [100];
172
173 dbg_regstat(buf, sizeof buf, regstatus);
174 pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
175}
176
177static void show_chgconfig(int por, const char *label, u8 chgconfig)
178{
179 char buf [100];
180
181 dbg_chgconf(por, buf, sizeof buf, chgconfig);
182 pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
183}
184
185#else
186
187static inline void show_chgstatus(const char *label, u8 chgstatus) { }
188static inline void show_regstatus(const char *label, u8 chgstatus) { }
189static inline void show_chgconfig(int por, const char *label, u8 chgconfig) { }
190
191#endif
192
193#ifdef CONFIG_DEBUG_FS
194
195static int dbg_show(struct seq_file *s, void *_)
196{
197 struct tps65010 *tps = s->private;
198 u8 value, v2;
199 unsigned i;
200 char buf[100];
201 const char *chip;
202
203 switch (tps->model) {
204 case TPS65010: chip = "tps65010"; break;
205 case TPS65011: chip = "tps65011"; break;
206 case TPS65012: chip = "tps65012"; break;
207 case TPS65013: chip = "tps65013"; break;
208 default: chip = NULL; break;
209 }
210 seq_printf(s, "driver %s\nversion %s\nchip %s\n\n",
211 DRIVER_NAME, DRIVER_VERSION, chip);
212
Ingo Molnar5c085d32006-01-18 23:16:04 +0100213 mutex_lock(&tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700214
215 /* FIXME how can we tell whether a battery is present?
216 * likely involves a charge gauging chip (like BQ26501).
217 */
218
219 seq_printf(s, "%scharging\n\n", tps->charging ? "" : "(not) ");
220
221
222 /* registers for monitoring battery charging and status; note
223 * that reading chgstat and regstat may ack IRQs...
224 */
David Brownellb5067f82007-10-13 23:56:30 +0200225 value = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
David Brownell72cd7992005-05-24 17:34:51 -0700226 dbg_chgconf(tps->por, buf, sizeof buf, value);
227 seq_printf(s, "chgconfig %s", buf);
228
David Brownellb5067f82007-10-13 23:56:30 +0200229 value = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
David Brownell72cd7992005-05-24 17:34:51 -0700230 dbg_chgstat(buf, sizeof buf, value);
231 seq_printf(s, "chgstat %s", buf);
David Brownellb5067f82007-10-13 23:56:30 +0200232 value = i2c_smbus_read_byte_data(tps->client, TPS_MASK1);
David Brownell72cd7992005-05-24 17:34:51 -0700233 dbg_chgstat(buf, sizeof buf, value);
234 seq_printf(s, "mask1 %s", buf);
235 /* ignore ackint1 */
236
David Brownellb5067f82007-10-13 23:56:30 +0200237 value = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
David Brownell72cd7992005-05-24 17:34:51 -0700238 dbg_regstat(buf, sizeof buf, value);
239 seq_printf(s, "regstat %s", buf);
David Brownellb5067f82007-10-13 23:56:30 +0200240 value = i2c_smbus_read_byte_data(tps->client, TPS_MASK2);
David Brownell72cd7992005-05-24 17:34:51 -0700241 dbg_regstat(buf, sizeof buf, value);
242 seq_printf(s, "mask2 %s\n", buf);
243 /* ignore ackint2 */
244
Mark Brownbb3d5932013-08-09 18:25:02 +0100245 queue_delayed_work(system_power_efficient_wq, &tps->work,
246 POWER_POLL_DELAY);
David Brownell72cd7992005-05-24 17:34:51 -0700247
248 /* VMAIN voltage, enable lowpower, etc */
David Brownellb5067f82007-10-13 23:56:30 +0200249 value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC1);
David Brownell72cd7992005-05-24 17:34:51 -0700250 seq_printf(s, "vdcdc1 %02x\n", value);
251
252 /* VCORE voltage, vibrator on/off */
David Brownellb5067f82007-10-13 23:56:30 +0200253 value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC2);
David Brownell72cd7992005-05-24 17:34:51 -0700254 seq_printf(s, "vdcdc2 %02x\n", value);
255
256 /* both LD0s, and their lowpower behavior */
David Brownellb5067f82007-10-13 23:56:30 +0200257 value = i2c_smbus_read_byte_data(tps->client, TPS_VREGS1);
David Brownell72cd7992005-05-24 17:34:51 -0700258 seq_printf(s, "vregs1 %02x\n\n", value);
259
260
261 /* LEDs and GPIOs */
David Brownellb5067f82007-10-13 23:56:30 +0200262 value = i2c_smbus_read_byte_data(tps->client, TPS_LED1_ON);
263 v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED1_PER);
David Brownell72cd7992005-05-24 17:34:51 -0700264 seq_printf(s, "led1 %s, on=%02x, per=%02x, %d/%d msec\n",
265 (value & 0x80)
266 ? ((v2 & 0x80) ? "on" : "off")
267 : ((v2 & 0x80) ? "blink" : "(nPG)"),
268 value, v2,
269 (value & 0x7f) * 10, (v2 & 0x7f) * 100);
270
David Brownellb5067f82007-10-13 23:56:30 +0200271 value = i2c_smbus_read_byte_data(tps->client, TPS_LED2_ON);
272 v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED2_PER);
David Brownell72cd7992005-05-24 17:34:51 -0700273 seq_printf(s, "led2 %s, on=%02x, per=%02x, %d/%d msec\n",
274 (value & 0x80)
275 ? ((v2 & 0x80) ? "on" : "off")
276 : ((v2 & 0x80) ? "blink" : "off"),
277 value, v2,
278 (value & 0x7f) * 10, (v2 & 0x7f) * 100);
279
David Brownellb5067f82007-10-13 23:56:30 +0200280 value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
281 v2 = i2c_smbus_read_byte_data(tps->client, TPS_MASK3);
David Brownell72cd7992005-05-24 17:34:51 -0700282 seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2);
283
284 for (i = 0; i < 4; i++) {
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700285 if (value & (1 << (4 + i)))
David Brownell72cd7992005-05-24 17:34:51 -0700286 seq_printf(s, " gpio%d-out %s\n", i + 1,
287 (value & (1 << i)) ? "low" : "hi ");
288 else
289 seq_printf(s, " gpio%d-in %s %s %s\n", i + 1,
290 (value & (1 << i)) ? "hi " : "low",
291 (v2 & (1 << i)) ? "no-irq" : "irq",
292 (v2 & (1 << (4 + i))) ? "rising" : "falling");
293 }
294
Ingo Molnar5c085d32006-01-18 23:16:04 +0100295 mutex_unlock(&tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700296 return 0;
297}
298
299static int dbg_tps_open(struct inode *inode, struct file *file)
300{
Theodore Ts'o8e18e292006-09-27 01:50:46 -0700301 return single_open(file, dbg_show, inode->i_private);
David Brownell72cd7992005-05-24 17:34:51 -0700302}
303
Arjan van de Ven2b8693c2007-02-12 00:55:32 -0800304static const struct file_operations debug_fops = {
David Brownell72cd7992005-05-24 17:34:51 -0700305 .open = dbg_tps_open,
306 .read = seq_read,
307 .llseek = seq_lseek,
308 .release = single_release,
309};
310
311#define DEBUG_FOPS &debug_fops
312
313#else
314#define DEBUG_FOPS NULL
315#endif
316
317/*-------------------------------------------------------------------------*/
318
319/* handle IRQS in a task context, so we can use I2C calls */
320static void tps65010_interrupt(struct tps65010 *tps)
321{
322 u8 tmp = 0, mask, poll;
323
David Brownell8c1bc042006-12-13 00:33:46 -0800324 /* IRQs won't trigger for certain events, but we can get
David Brownell72cd7992005-05-24 17:34:51 -0700325 * others by polling (normally, with external power applied).
326 */
327 poll = 0;
328
329 /* regstatus irqs */
330 if (tps->nmask2) {
David Brownellb5067f82007-10-13 23:56:30 +0200331 tmp = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
David Brownell72cd7992005-05-24 17:34:51 -0700332 mask = tmp ^ tps->regstatus;
333 tps->regstatus = tmp;
334 mask &= tps->nmask2;
335 } else
336 mask = 0;
337 if (mask) {
338 tps->regstatus = tmp;
339 /* may need to shut something down ... */
340
341 /* "off" usually means deep sleep */
342 if (tmp & TPS_REG_ONOFF) {
343 pr_info("%s: power off button\n", DRIVER_NAME);
344#if 0
345 /* REVISIT: this might need its own workqueue
346 * plus tweaks including deadlock avoidance ...
Johannes Bergab3bfca2007-05-06 14:50:49 -0700347 * also needs to get error handling and probably
Rafael J. Wysockib0cb1a12007-07-29 23:24:36 +0200348 * an #ifdef CONFIG_HIBERNATION
David Brownell72cd7992005-05-24 17:34:51 -0700349 */
Rafael J. Wysockia3d25c22007-05-09 02:33:18 -0700350 hibernate();
David Brownell72cd7992005-05-24 17:34:51 -0700351#endif
352 poll = 1;
353 }
354 }
355
356 /* chgstatus irqs */
357 if (tps->nmask1) {
David Brownellb5067f82007-10-13 23:56:30 +0200358 tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
David Brownell72cd7992005-05-24 17:34:51 -0700359 mask = tmp ^ tps->chgstatus;
360 tps->chgstatus = tmp;
361 mask &= tps->nmask1;
362 } else
363 mask = 0;
364 if (mask) {
365 unsigned charging = 0;
366
367 show_chgstatus("chg/irq", tmp);
368 if (tmp & (TPS_CHG_USB|TPS_CHG_AC))
369 show_chgconfig(tps->por, "conf", tps->chgconf);
370
371 /* Unless it was turned off or disabled, we charge any
372 * battery whenever there's power available for it
373 * and the charger hasn't been disabled.
374 */
375 if (!(tps->chgstatus & ~(TPS_CHG_USB|TPS_CHG_AC))
376 && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
377 && (tps->chgconf & TPS_CHARGE_ENABLE)
378 ) {
379 if (tps->chgstatus & TPS_CHG_USB) {
380 /* VBUS options are readonly until reconnect */
381 if (mask & TPS_CHG_USB)
382 set_bit(FLAG_VBUS_CHANGED, &tps->flags);
383 charging = 1;
384 } else if (tps->chgstatus & TPS_CHG_AC)
385 charging = 1;
386 }
387 if (charging != tps->charging) {
388 tps->charging = charging;
389 pr_info("%s: battery %scharging\n",
390 DRIVER_NAME, charging ? "" :
391 ((tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
392 ? "NOT " : "dis"));
393 }
394 }
395
396 /* always poll to detect (a) power removal, without tps65013
397 * NO_CHG IRQ; or (b) restart of charging after stop.
398 */
399 if ((tps->model != TPS65013 || !tps->charging)
400 && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)))
401 poll = 1;
402 if (poll)
Mark Brownbb3d5932013-08-09 18:25:02 +0100403 queue_delayed_work(system_power_efficient_wq, &tps->work,
404 POWER_POLL_DELAY);
David Brownell72cd7992005-05-24 17:34:51 -0700405
406 /* also potentially gpio-in rise or fall */
407}
408
409/* handle IRQs and polling using keventd for now */
David Brownell8c1bc042006-12-13 00:33:46 -0800410static void tps65010_work(struct work_struct *work)
David Brownell72cd7992005-05-24 17:34:51 -0700411{
David Brownell8c1bc042006-12-13 00:33:46 -0800412 struct tps65010 *tps;
David Brownell72cd7992005-05-24 17:34:51 -0700413
Tejun Heoafdb32f2010-12-24 16:00:17 +0100414 tps = container_of(to_delayed_work(work), struct tps65010, work);
Ingo Molnar5c085d32006-01-18 23:16:04 +0100415 mutex_lock(&tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700416
417 tps65010_interrupt(tps);
418
419 if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) {
420 int status;
421 u8 chgconfig, tmp;
422
David Brownellb5067f82007-10-13 23:56:30 +0200423 chgconfig = i2c_smbus_read_byte_data(tps->client,
David Brownell72cd7992005-05-24 17:34:51 -0700424 TPS_CHGCONFIG);
425 chgconfig &= ~(TPS_VBUS_500MA | TPS_VBUS_CHARGING);
426 if (tps->vbus == 500)
427 chgconfig |= TPS_VBUS_500MA | TPS_VBUS_CHARGING;
428 else if (tps->vbus >= 100)
429 chgconfig |= TPS_VBUS_CHARGING;
430
David Brownellb5067f82007-10-13 23:56:30 +0200431 status = i2c_smbus_write_byte_data(tps->client,
David Brownell72cd7992005-05-24 17:34:51 -0700432 TPS_CHGCONFIG, chgconfig);
433
434 /* vbus update fails unless VBUS is connected! */
David Brownellb5067f82007-10-13 23:56:30 +0200435 tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
David Brownell72cd7992005-05-24 17:34:51 -0700436 tps->chgconf = tmp;
437 show_chgconfig(tps->por, "update vbus", tmp);
438 }
439
440 if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
David Brownell8056c6c2007-10-13 23:56:30 +0200441 enable_irq(tps->client->irq);
David Brownell72cd7992005-05-24 17:34:51 -0700442
Ingo Molnar5c085d32006-01-18 23:16:04 +0100443 mutex_unlock(&tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700444}
445
David Howells7d12e782006-10-05 14:55:46 +0100446static irqreturn_t tps65010_irq(int irq, void *_tps)
David Brownell72cd7992005-05-24 17:34:51 -0700447{
448 struct tps65010 *tps = _tps;
449
450 disable_irq_nosync(irq);
451 set_bit(FLAG_IRQ_ENABLE, &tps->flags);
Mark Brownbb3d5932013-08-09 18:25:02 +0100452 queue_delayed_work(system_power_efficient_wq, &tps->work, 0);
David Brownell72cd7992005-05-24 17:34:51 -0700453 return IRQ_HANDLED;
454}
455
456/*-------------------------------------------------------------------------*/
457
David Brownell79966fd2008-02-28 22:07:28 -0800458/* offsets 0..3 == GPIO1..GPIO4
459 * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes)
Marek Vasutb84ee0b2008-10-14 17:30:04 +0200460 * offset 6 == vibrator motor driver
David Brownell79966fd2008-02-28 22:07:28 -0800461 */
462static void
463tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
464{
465 if (offset < 4)
466 tps65010_set_gpio_out_value(offset + 1, value);
Marek Vasutb84ee0b2008-10-14 17:30:04 +0200467 else if (offset < 6)
David Brownell79966fd2008-02-28 22:07:28 -0800468 tps65010_set_led(offset - 3, value ? ON : OFF);
Marek Vasutb84ee0b2008-10-14 17:30:04 +0200469 else
470 tps65010_set_vib(value);
David Brownell79966fd2008-02-28 22:07:28 -0800471}
472
473static int
474tps65010_output(struct gpio_chip *chip, unsigned offset, int value)
475{
476 /* GPIOs may be input-only */
477 if (offset < 4) {
478 struct tps65010 *tps;
479
Linus Walleij22e5e742016-03-30 10:48:07 +0200480 tps = gpiochip_get_data(chip);
David Brownell79966fd2008-02-28 22:07:28 -0800481 if (!(tps->outmask & (1 << offset)))
482 return -EINVAL;
483 tps65010_set_gpio_out_value(offset + 1, value);
Marek Vasutb84ee0b2008-10-14 17:30:04 +0200484 } else if (offset < 6)
David Brownell79966fd2008-02-28 22:07:28 -0800485 tps65010_set_led(offset - 3, value ? ON : OFF);
Marek Vasutb84ee0b2008-10-14 17:30:04 +0200486 else
487 tps65010_set_vib(value);
David Brownell79966fd2008-02-28 22:07:28 -0800488
489 return 0;
490}
491
492static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset)
493{
494 int value;
495 struct tps65010 *tps;
496
Linus Walleij22e5e742016-03-30 10:48:07 +0200497 tps = gpiochip_get_data(chip);
David Brownell79966fd2008-02-28 22:07:28 -0800498
499 if (offset < 4) {
500 value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
501 if (value < 0)
Linus Walleijbf3de472015-12-22 15:48:13 +0100502 return value;
David Brownell79966fd2008-02-28 22:07:28 -0800503 if (value & (1 << (offset + 4))) /* output */
504 return !(value & (1 << offset));
505 else /* input */
Linus Walleijbf3de472015-12-22 15:48:13 +0100506 return !!(value & (1 << offset));
David Brownell79966fd2008-02-28 22:07:28 -0800507 }
508
509 /* REVISIT we *could* report LED1/nPG and LED2 state ... */
510 return 0;
511}
512
513
514/*-------------------------------------------------------------------------*/
515
David Brownell72cd7992005-05-24 17:34:51 -0700516static struct tps65010 *the_tps;
517
Dmitry Torokhovbb733702015-03-09 10:47:15 -0700518static int tps65010_remove(struct i2c_client *client)
David Brownell72cd7992005-05-24 17:34:51 -0700519{
David Brownell8056c6c2007-10-13 23:56:30 +0200520 struct tps65010 *tps = i2c_get_clientdata(client);
Jingoo Han334a41c2013-07-30 17:10:05 +0900521 struct tps65010_board *board = dev_get_platdata(&client->dev);
David Brownell72cd7992005-05-24 17:34:51 -0700522
David Brownell79966fd2008-02-28 22:07:28 -0800523 if (board && board->teardown) {
524 int status = board->teardown(client, board->context);
525 if (status < 0)
526 dev_dbg(&client->dev, "board %s %s err %d\n",
527 "teardown", client->name, status);
528 }
David Brownell8056c6c2007-10-13 23:56:30 +0200529 if (client->irq > 0)
530 free_irq(client->irq, tps);
Tejun Heoafdb32f2010-12-24 16:00:17 +0100531 cancel_delayed_work_sync(&tps->work);
David Brownell72cd7992005-05-24 17:34:51 -0700532 debugfs_remove(tps->file);
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700533 the_tps = NULL;
David Brownell72cd7992005-05-24 17:34:51 -0700534 return 0;
535}
536
Jean Delvared2653e92008-04-29 23:11:39 +0200537static int tps65010_probe(struct i2c_client *client,
538 const struct i2c_device_id *id)
David Brownell72cd7992005-05-24 17:34:51 -0700539{
540 struct tps65010 *tps;
541 int status;
Jingoo Han334a41c2013-07-30 17:10:05 +0900542 struct tps65010_board *board = dev_get_platdata(&client->dev);
David Brownell72cd7992005-05-24 17:34:51 -0700543
544 if (the_tps) {
David Brownell8056c6c2007-10-13 23:56:30 +0200545 dev_dbg(&client->dev, "only one tps6501x chip allowed\n");
546 return -ENODEV;
David Brownell72cd7992005-05-24 17:34:51 -0700547 }
548
David Brownell8056c6c2007-10-13 23:56:30 +0200549 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
550 return -EINVAL;
551
Jingoo Haneac1dcb2013-08-20 16:05:54 +0900552 tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
David Brownell72cd7992005-05-24 17:34:51 -0700553 if (!tps)
David Brownell8056c6c2007-10-13 23:56:30 +0200554 return -ENOMEM;
David Brownell72cd7992005-05-24 17:34:51 -0700555
Ingo Molnar5c085d32006-01-18 23:16:04 +0100556 mutex_init(&tps->lock);
David Brownell8c1bc042006-12-13 00:33:46 -0800557 INIT_DELAYED_WORK(&tps->work, tps65010_work);
David Brownell8056c6c2007-10-13 23:56:30 +0200558 tps->client = client;
Jean Delvare3760f732008-04-29 23:11:40 +0200559 tps->model = id->driver_data;
David Brownell72cd7992005-05-24 17:34:51 -0700560
David Brownell4801bc22006-08-11 22:53:08 +0200561 /* the IRQ is active low, but many gpio lines can't support that
David Brownell8056c6c2007-10-13 23:56:30 +0200562 * so this driver uses falling-edge triggers instead.
David Brownell4801bc22006-08-11 22:53:08 +0200563 */
David Brownell8056c6c2007-10-13 23:56:30 +0200564 if (client->irq > 0) {
565 status = request_irq(client->irq, tps65010_irq,
Theodore Ts'o212436c2012-07-17 13:23:36 -0400566 IRQF_TRIGGER_FALLING, DRIVER_NAME, tps);
David Brownell72cd7992005-05-24 17:34:51 -0700567 if (status < 0) {
David Brownellb5067f82007-10-13 23:56:30 +0200568 dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
David Brownell8056c6c2007-10-13 23:56:30 +0200569 client->irq, status);
Jingoo Haneac1dcb2013-08-20 16:05:54 +0900570 return status;
David Brownell72cd7992005-05-24 17:34:51 -0700571 }
David Brownell72cd7992005-05-24 17:34:51 -0700572 /* annoying race here, ideally we'd have an option
573 * to claim the irq now and enable it later.
David Brownell8056c6c2007-10-13 23:56:30 +0200574 * FIXME genirq IRQF_NOAUTOEN now solves that ...
David Brownell72cd7992005-05-24 17:34:51 -0700575 */
David Brownell8056c6c2007-10-13 23:56:30 +0200576 disable_irq(client->irq);
David Brownell72cd7992005-05-24 17:34:51 -0700577 set_bit(FLAG_IRQ_ENABLE, &tps->flags);
David Brownell72cd7992005-05-24 17:34:51 -0700578 } else
David Brownell8056c6c2007-10-13 23:56:30 +0200579 dev_warn(&client->dev, "IRQ not configured!\n");
David Brownell72cd7992005-05-24 17:34:51 -0700580
581
582 switch (tps->model) {
583 case TPS65010:
584 case TPS65012:
585 tps->por = 1;
586 break;
David Brownell72cd7992005-05-24 17:34:51 -0700587 /* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */
588 }
David Brownellb5067f82007-10-13 23:56:30 +0200589 tps->chgconf = i2c_smbus_read_byte_data(client, TPS_CHGCONFIG);
David Brownell72cd7992005-05-24 17:34:51 -0700590 show_chgconfig(tps->por, "conf/init", tps->chgconf);
591
592 show_chgstatus("chg/init",
David Brownellb5067f82007-10-13 23:56:30 +0200593 i2c_smbus_read_byte_data(client, TPS_CHGSTATUS));
David Brownell72cd7992005-05-24 17:34:51 -0700594 show_regstatus("reg/init",
David Brownellb5067f82007-10-13 23:56:30 +0200595 i2c_smbus_read_byte_data(client, TPS_REGSTATUS));
David Brownell72cd7992005-05-24 17:34:51 -0700596
597 pr_debug("%s: vdcdc1 0x%02x, vdcdc2 %02x, vregs1 %02x\n", DRIVER_NAME,
David Brownellb5067f82007-10-13 23:56:30 +0200598 i2c_smbus_read_byte_data(client, TPS_VDCDC1),
599 i2c_smbus_read_byte_data(client, TPS_VDCDC2),
600 i2c_smbus_read_byte_data(client, TPS_VREGS1));
David Brownell72cd7992005-05-24 17:34:51 -0700601 pr_debug("%s: defgpio 0x%02x, mask3 0x%02x\n", DRIVER_NAME,
David Brownellb5067f82007-10-13 23:56:30 +0200602 i2c_smbus_read_byte_data(client, TPS_DEFGPIO),
603 i2c_smbus_read_byte_data(client, TPS_MASK3));
David Brownell72cd7992005-05-24 17:34:51 -0700604
Jean Delvare6d072d72008-04-29 23:11:38 +0200605 i2c_set_clientdata(client, tps);
David Brownell72cd7992005-05-24 17:34:51 -0700606 the_tps = tps;
607
608#if defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG)
609 /* USB hosts can't draw VBUS. OTG devices could, later
610 * when OTG infrastructure enables it. USB peripherals
611 * could be relying on VBUS while booting, though.
612 */
613 tps->vbus = 100;
614#endif
615
616 /* unmask the "interesting" irqs, then poll once to
617 * kickstart monitoring, initialize shadowed status
618 * registers, and maybe disable VBUS draw.
619 */
620 tps->nmask1 = ~0;
David Brownellb5067f82007-10-13 23:56:30 +0200621 (void) i2c_smbus_write_byte_data(client, TPS_MASK1, ~tps->nmask1);
David Brownell72cd7992005-05-24 17:34:51 -0700622
623 tps->nmask2 = TPS_REG_ONOFF;
624 if (tps->model == TPS65013)
625 tps->nmask2 |= TPS_REG_NO_CHG;
David Brownellb5067f82007-10-13 23:56:30 +0200626 (void) i2c_smbus_write_byte_data(client, TPS_MASK2, ~tps->nmask2);
David Brownell72cd7992005-05-24 17:34:51 -0700627
David Brownellb5067f82007-10-13 23:56:30 +0200628 (void) i2c_smbus_write_byte_data(client, TPS_MASK3, 0x0f
629 | i2c_smbus_read_byte_data(client, TPS_MASK3));
David Brownell72cd7992005-05-24 17:34:51 -0700630
David Brownell8c1bc042006-12-13 00:33:46 -0800631 tps65010_work(&tps->work.work);
David Brownell72cd7992005-05-24 17:34:51 -0700632
633 tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
634 tps, DEBUG_FOPS);
David Brownell79966fd2008-02-28 22:07:28 -0800635
636 /* optionally register GPIOs */
Ben Dooks84836992009-11-02 16:52:20 +0000637 if (board && board->base != 0) {
David Brownell79966fd2008-02-28 22:07:28 -0800638 tps->outmask = board->outmask;
639
640 tps->chip.label = client->name;
Linus Walleij58383c72015-11-04 09:56:26 +0100641 tps->chip.parent = &client->dev;
David Brownelld8f388d2008-07-25 01:46:07 -0700642 tps->chip.owner = THIS_MODULE;
David Brownell79966fd2008-02-28 22:07:28 -0800643
644 tps->chip.set = tps65010_gpio_set;
645 tps->chip.direction_output = tps65010_output;
646
647 /* NOTE: only partial support for inputs; nyet IRQs */
648 tps->chip.get = tps65010_gpio_get;
649
650 tps->chip.base = board->base;
Marek Vasutb84ee0b2008-10-14 17:30:04 +0200651 tps->chip.ngpio = 7;
David Brownell79966fd2008-02-28 22:07:28 -0800652 tps->chip.can_sleep = 1;
653
Linus Walleij22e5e742016-03-30 10:48:07 +0200654 status = gpiochip_add_data(&tps->chip, tps);
David Brownell79966fd2008-02-28 22:07:28 -0800655 if (status < 0)
656 dev_err(&client->dev, "can't add gpiochip, err %d\n",
657 status);
658 else if (board->setup) {
659 status = board->setup(client, board->context);
660 if (status < 0) {
661 dev_dbg(&client->dev,
662 "board %s %s err %d\n",
663 "setup", client->name, status);
664 status = 0;
665 }
666 }
667 }
668
David Brownell72cd7992005-05-24 17:34:51 -0700669 return 0;
David Brownell72cd7992005-05-24 17:34:51 -0700670}
671
Jean Delvare3760f732008-04-29 23:11:40 +0200672static const struct i2c_device_id tps65010_id[] = {
673 { "tps65010", TPS65010 },
674 { "tps65011", TPS65011 },
675 { "tps65012", TPS65012 },
676 { "tps65013", TPS65013 },
Marek Vasutb84ee0b2008-10-14 17:30:04 +0200677 { "tps65014", TPS65011 }, /* tps65011 charging at 6.5V max */
Jean Delvare3760f732008-04-29 23:11:40 +0200678 { }
679};
680MODULE_DEVICE_TABLE(i2c, tps65010_id);
681
David Brownell72cd7992005-05-24 17:34:51 -0700682static struct i2c_driver tps65010_driver = {
Laurent Riffarda9718b02005-11-26 20:36:00 +0100683 .driver = {
Laurent Riffarda9718b02005-11-26 20:36:00 +0100684 .name = "tps65010",
685 },
David Brownell8056c6c2007-10-13 23:56:30 +0200686 .probe = tps65010_probe,
Dmitry Torokhovbb733702015-03-09 10:47:15 -0700687 .remove = tps65010_remove,
Jean Delvare3760f732008-04-29 23:11:40 +0200688 .id_table = tps65010_id,
David Brownell72cd7992005-05-24 17:34:51 -0700689};
690
691/*-------------------------------------------------------------------------*/
692
693/* Draw from VBUS:
694 * 0 mA -- DON'T DRAW (might supply power instead)
695 * 100 mA -- usb unit load (slowest charge rate)
696 * 500 mA -- usb high power (fast battery charge)
697 */
698int tps65010_set_vbus_draw(unsigned mA)
699{
700 unsigned long flags;
701
702 if (!the_tps)
703 return -ENODEV;
704
705 /* assumes non-SMP */
706 local_irq_save(flags);
707 if (mA >= 500)
708 mA = 500;
709 else if (mA >= 100)
710 mA = 100;
711 else
712 mA = 0;
713 the_tps->vbus = mA;
714 if ((the_tps->chgstatus & TPS_CHG_USB)
715 && test_and_set_bit(
716 FLAG_VBUS_CHANGED, &the_tps->flags)) {
717 /* gadget drivers call this in_irq() */
Mark Brownbb3d5932013-08-09 18:25:02 +0100718 queue_delayed_work(system_power_efficient_wq, &the_tps->work,
719 0);
David Brownell72cd7992005-05-24 17:34:51 -0700720 }
721 local_irq_restore(flags);
722
723 return 0;
724}
725EXPORT_SYMBOL(tps65010_set_vbus_draw);
726
727/*-------------------------------------------------------------------------*/
728/* tps65010_set_gpio_out_value parameter:
729 * gpio: GPIO1, GPIO2, GPIO3 or GPIO4
730 * value: LOW or HIGH
731 */
732int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
733{
734 int status;
735 unsigned defgpio;
736
737 if (!the_tps)
738 return -ENODEV;
739 if ((gpio < GPIO1) || (gpio > GPIO4))
740 return -EINVAL;
741
Ingo Molnar5c085d32006-01-18 23:16:04 +0100742 mutex_lock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700743
David Brownellb5067f82007-10-13 23:56:30 +0200744 defgpio = i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO);
David Brownell72cd7992005-05-24 17:34:51 -0700745
746 /* Configure GPIO for output */
747 defgpio |= 1 << (gpio + 3);
748
749 /* Writing 1 forces a logic 0 on that GPIO and vice versa */
750 switch (value) {
751 case LOW:
752 defgpio |= 1 << (gpio - 1); /* set GPIO low by writing 1 */
753 break;
754 /* case HIGH: */
755 default:
756 defgpio &= ~(1 << (gpio - 1)); /* set GPIO high by writing 0 */
757 break;
758 }
759
David Brownellb5067f82007-10-13 23:56:30 +0200760 status = i2c_smbus_write_byte_data(the_tps->client,
David Brownell72cd7992005-05-24 17:34:51 -0700761 TPS_DEFGPIO, defgpio);
762
763 pr_debug("%s: gpio%dout = %s, defgpio 0x%02x\n", DRIVER_NAME,
764 gpio, value ? "high" : "low",
David Brownellb5067f82007-10-13 23:56:30 +0200765 i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO));
David Brownell72cd7992005-05-24 17:34:51 -0700766
Ingo Molnar5c085d32006-01-18 23:16:04 +0100767 mutex_unlock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700768 return status;
769}
770EXPORT_SYMBOL(tps65010_set_gpio_out_value);
771
772/*-------------------------------------------------------------------------*/
773/* tps65010_set_led parameter:
774 * led: LED1 or LED2
775 * mode: ON, OFF or BLINK
776 */
777int tps65010_set_led(unsigned led, unsigned mode)
778{
779 int status;
780 unsigned led_on, led_per, offs;
781
782 if (!the_tps)
783 return -ENODEV;
784
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700785 if (led == LED1)
David Brownell72cd7992005-05-24 17:34:51 -0700786 offs = 0;
787 else {
788 offs = 2;
789 led = LED2;
790 }
791
Ingo Molnar5c085d32006-01-18 23:16:04 +0100792 mutex_lock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700793
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700794 pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
David Brownellb5067f82007-10-13 23:56:30 +0200795 i2c_smbus_read_byte_data(the_tps->client,
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700796 TPS_LED1_ON + offs));
David Brownell72cd7992005-05-24 17:34:51 -0700797
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700798 pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led,
David Brownellb5067f82007-10-13 23:56:30 +0200799 i2c_smbus_read_byte_data(the_tps->client,
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700800 TPS_LED1_PER + offs));
David Brownell72cd7992005-05-24 17:34:51 -0700801
802 switch (mode) {
803 case OFF:
804 led_on = 1 << 7;
805 led_per = 0 << 7;
806 break;
807 case ON:
808 led_on = 1 << 7;
809 led_per = 1 << 7;
810 break;
811 case BLINK:
812 led_on = 0x30 | (0 << 7);
813 led_per = 0x08 | (1 << 7);
814 break;
815 default:
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700816 printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
David Brownell72cd7992005-05-24 17:34:51 -0700817 DRIVER_NAME);
Ingo Molnar5c085d32006-01-18 23:16:04 +0100818 mutex_unlock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700819 return -EINVAL;
820 }
821
David Brownellb5067f82007-10-13 23:56:30 +0200822 status = i2c_smbus_write_byte_data(the_tps->client,
David Brownell72cd7992005-05-24 17:34:51 -0700823 TPS_LED1_ON + offs, led_on);
824
825 if (status != 0) {
826 printk(KERN_ERR "%s: Failed to write led%i_on register\n",
827 DRIVER_NAME, led);
Ingo Molnar5c085d32006-01-18 23:16:04 +0100828 mutex_unlock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700829 return status;
830 }
831
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700832 pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
David Brownellb5067f82007-10-13 23:56:30 +0200833 i2c_smbus_read_byte_data(the_tps->client, TPS_LED1_ON + offs));
David Brownell72cd7992005-05-24 17:34:51 -0700834
David Brownellb5067f82007-10-13 23:56:30 +0200835 status = i2c_smbus_write_byte_data(the_tps->client,
David Brownell72cd7992005-05-24 17:34:51 -0700836 TPS_LED1_PER + offs, led_per);
837
838 if (status != 0) {
839 printk(KERN_ERR "%s: Failed to write led%i_per register\n",
840 DRIVER_NAME, led);
Ingo Molnar5c085d32006-01-18 23:16:04 +0100841 mutex_unlock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700842 return status;
843 }
844
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700845 pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led,
David Brownellb5067f82007-10-13 23:56:30 +0200846 i2c_smbus_read_byte_data(the_tps->client,
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700847 TPS_LED1_PER + offs));
David Brownell72cd7992005-05-24 17:34:51 -0700848
Ingo Molnar5c085d32006-01-18 23:16:04 +0100849 mutex_unlock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700850
851 return status;
852}
853EXPORT_SYMBOL(tps65010_set_led);
854
855/*-------------------------------------------------------------------------*/
856/* tps65010_set_vib parameter:
857 * value: ON or OFF
858 */
859int tps65010_set_vib(unsigned value)
860{
861 int status;
862 unsigned vdcdc2;
863
864 if (!the_tps)
865 return -ENODEV;
866
Ingo Molnar5c085d32006-01-18 23:16:04 +0100867 mutex_lock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700868
David Brownellb5067f82007-10-13 23:56:30 +0200869 vdcdc2 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC2);
David Brownell72cd7992005-05-24 17:34:51 -0700870 vdcdc2 &= ~(1 << 1);
871 if (value)
872 vdcdc2 |= (1 << 1);
David Brownellb5067f82007-10-13 23:56:30 +0200873 status = i2c_smbus_write_byte_data(the_tps->client,
David Brownell72cd7992005-05-24 17:34:51 -0700874 TPS_VDCDC2, vdcdc2);
875
876 pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
877
Ingo Molnar5c085d32006-01-18 23:16:04 +0100878 mutex_unlock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700879 return status;
880}
881EXPORT_SYMBOL(tps65010_set_vib);
882
883/*-------------------------------------------------------------------------*/
884/* tps65010_set_low_pwr parameter:
885 * mode: ON or OFF
886 */
887int tps65010_set_low_pwr(unsigned mode)
888{
889 int status;
890 unsigned vdcdc1;
891
892 if (!the_tps)
893 return -ENODEV;
894
Ingo Molnar5c085d32006-01-18 23:16:04 +0100895 mutex_lock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700896
897 pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
898 mode ? "enable" : "disable",
David Brownellb5067f82007-10-13 23:56:30 +0200899 i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
David Brownell72cd7992005-05-24 17:34:51 -0700900
David Brownellb5067f82007-10-13 23:56:30 +0200901 vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
David Brownell72cd7992005-05-24 17:34:51 -0700902
903 switch (mode) {
904 case OFF:
905 vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
906 break;
907 /* case ON: */
908 default:
909 vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
910 break;
911 }
912
David Brownellb5067f82007-10-13 23:56:30 +0200913 status = i2c_smbus_write_byte_data(the_tps->client,
David Brownell72cd7992005-05-24 17:34:51 -0700914 TPS_VDCDC1, vdcdc1);
915
916 if (status != 0)
917 printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700918 DRIVER_NAME);
David Brownell72cd7992005-05-24 17:34:51 -0700919 else
920 pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
David Brownellb5067f82007-10-13 23:56:30 +0200921 i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
David Brownell72cd7992005-05-24 17:34:51 -0700922
Ingo Molnar5c085d32006-01-18 23:16:04 +0100923 mutex_unlock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700924
925 return status;
926}
927EXPORT_SYMBOL(tps65010_set_low_pwr);
928
929/*-------------------------------------------------------------------------*/
930/* tps65010_config_vregs1 parameter:
931 * value to be written to VREGS1 register
932 * Note: The complete register is written, set all bits you need
933 */
934int tps65010_config_vregs1(unsigned value)
935{
936 int status;
937
938 if (!the_tps)
939 return -ENODEV;
940
Ingo Molnar5c085d32006-01-18 23:16:04 +0100941 mutex_lock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700942
943 pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
David Brownellb5067f82007-10-13 23:56:30 +0200944 i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
David Brownell72cd7992005-05-24 17:34:51 -0700945
David Brownellb5067f82007-10-13 23:56:30 +0200946 status = i2c_smbus_write_byte_data(the_tps->client,
David Brownell72cd7992005-05-24 17:34:51 -0700947 TPS_VREGS1, value);
948
949 if (status != 0)
950 printk(KERN_ERR "%s: Failed to write vregs1 register\n",
david-b@pacbell.net65fc50e2005-06-29 07:13:00 -0700951 DRIVER_NAME);
David Brownell72cd7992005-05-24 17:34:51 -0700952 else
953 pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
David Brownellb5067f82007-10-13 23:56:30 +0200954 i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
David Brownell72cd7992005-05-24 17:34:51 -0700955
Ingo Molnar5c085d32006-01-18 23:16:04 +0100956 mutex_unlock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -0700957
958 return status;
959}
960EXPORT_SYMBOL(tps65010_config_vregs1);
961
Ben Dooksb45440c2009-11-02 16:52:30 +0000962int tps65010_config_vdcdc2(unsigned value)
963{
964 struct i2c_client *c;
965 int status;
966
967 if (!the_tps)
968 return -ENODEV;
969
970 c = the_tps->client;
971 mutex_lock(&the_tps->lock);
972
973 pr_debug("%s: vdcdc2 0x%02x\n", DRIVER_NAME,
974 i2c_smbus_read_byte_data(c, TPS_VDCDC2));
975
976 status = i2c_smbus_write_byte_data(c, TPS_VDCDC2, value);
977
978 if (status != 0)
979 printk(KERN_ERR "%s: Failed to write vdcdc2 register\n",
980 DRIVER_NAME);
981 else
982 pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
983 i2c_smbus_read_byte_data(c, TPS_VDCDC2));
984
985 mutex_unlock(&the_tps->lock);
986 return status;
987}
988EXPORT_SYMBOL(tps65010_config_vdcdc2);
989
David Brownell72cd7992005-05-24 17:34:51 -0700990/*-------------------------------------------------------------------------*/
991/* tps65013_set_low_pwr parameter:
992 * mode: ON or OFF
993 */
994
995/* FIXME: Assumes AC or USB power is present. Setting AUA bit is not
996 required if power supply is through a battery */
997
998int tps65013_set_low_pwr(unsigned mode)
999{
1000 int status;
1001 unsigned vdcdc1, chgconfig;
1002
1003 if (!the_tps || the_tps->por)
1004 return -ENODEV;
1005
Ingo Molnar5c085d32006-01-18 23:16:04 +01001006 mutex_lock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -07001007
1008 pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
1009 DRIVER_NAME,
1010 mode ? "enable" : "disable",
David Brownellb5067f82007-10-13 23:56:30 +02001011 i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG),
1012 i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
David Brownell72cd7992005-05-24 17:34:51 -07001013
David Brownellb5067f82007-10-13 23:56:30 +02001014 chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
1015 vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
David Brownell72cd7992005-05-24 17:34:51 -07001016
1017 switch (mode) {
1018 case OFF:
1019 chgconfig &= ~TPS65013_AUA; /* disable AUA bit */
1020 vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
1021 break;
1022 /* case ON: */
1023 default:
1024 chgconfig |= TPS65013_AUA; /* enable AUA bit */
1025 vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
1026 break;
1027 }
1028
David Brownellb5067f82007-10-13 23:56:30 +02001029 status = i2c_smbus_write_byte_data(the_tps->client,
David Brownell72cd7992005-05-24 17:34:51 -07001030 TPS_CHGCONFIG, chgconfig);
1031 if (status != 0) {
1032 printk(KERN_ERR "%s: Failed to write chconfig register\n",
1033 DRIVER_NAME);
Ingo Molnar5c085d32006-01-18 23:16:04 +01001034 mutex_unlock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -07001035 return status;
1036 }
1037
David Brownellb5067f82007-10-13 23:56:30 +02001038 chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
David Brownell72cd7992005-05-24 17:34:51 -07001039 the_tps->chgconf = chgconfig;
1040 show_chgconfig(0, "chgconf", chgconfig);
1041
David Brownellb5067f82007-10-13 23:56:30 +02001042 status = i2c_smbus_write_byte_data(the_tps->client,
David Brownell72cd7992005-05-24 17:34:51 -07001043 TPS_VDCDC1, vdcdc1);
1044
1045 if (status != 0)
1046 printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
1047 DRIVER_NAME);
1048 else
1049 pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
David Brownellb5067f82007-10-13 23:56:30 +02001050 i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
David Brownell72cd7992005-05-24 17:34:51 -07001051
Ingo Molnar5c085d32006-01-18 23:16:04 +01001052 mutex_unlock(&the_tps->lock);
David Brownell72cd7992005-05-24 17:34:51 -07001053
1054 return status;
1055}
1056EXPORT_SYMBOL(tps65013_set_low_pwr);
1057
1058/*-------------------------------------------------------------------------*/
1059
1060static int __init tps_init(void)
1061{
Aaro Koskinendbc352b2016-01-11 21:46:49 +02001062 return i2c_add_driver(&tps65010_driver);
David Brownell72cd7992005-05-24 17:34:51 -07001063}
1064/* NOTE: this MUST be initialized before the other parts of the system
1065 * that rely on it ... but after the i2c bus on which this relies.
1066 * That is, much earlier than on PC-type systems, which don't often use
1067 * I2C as a core system bus.
1068 */
1069subsys_initcall(tps_init);
1070
1071static void __exit tps_exit(void)
1072{
1073 i2c_del_driver(&tps65010_driver);
1074}
1075module_exit(tps_exit);
1076