blob: 4a3842212c5062811c7973413e4d7aec62679951 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * scsi_lib.c Copyright (C) 1999 Eric Youngdale
3 *
4 * SCSI queueing library.
5 * Initial versions: Eric Youngdale (eric@andante.org).
6 * Based upon conversations with large numbers
7 * of people at Linux Expo.
8 */
9
10#include <linux/bio.h>
James Bottomleyd3f46f32008-01-15 11:11:46 -060011#include <linux/bitops.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070012#include <linux/blkdev.h>
13#include <linux/completion.h>
14#include <linux/kernel.h>
15#include <linux/mempool.h>
16#include <linux/slab.h>
17#include <linux/init.h>
18#include <linux/pci.h>
19#include <linux/delay.h>
James Bottomleyfaead262006-02-14 10:42:07 -060020#include <linux/hardirq.h>
Jens Axboec6132da2007-10-16 11:08:49 +020021#include <linux/scatterlist.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070022
23#include <scsi/scsi.h>
Christoph Hellwigbeb40482006-06-10 18:01:03 +020024#include <scsi/scsi_cmnd.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070025#include <scsi/scsi_dbg.h>
26#include <scsi/scsi_device.h>
27#include <scsi/scsi_driver.h>
28#include <scsi/scsi_eh.h>
29#include <scsi/scsi_host.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070030
31#include "scsi_priv.h"
32#include "scsi_logging.h"
33
34
Tobias Klauser6391a112006-06-08 22:23:48 -070035#define SG_MEMPOOL_NR ARRAY_SIZE(scsi_sg_pools)
Jens Axboe59725112007-04-02 10:06:42 +020036#define SG_MEMPOOL_SIZE 2
Linus Torvalds1da177e2005-04-16 15:20:36 -070037
38struct scsi_host_sg_pool {
39 size_t size;
Jens Axboea8474ce2007-08-07 09:02:51 +020040 char *name;
Christoph Lametere18b8902006-12-06 20:33:20 -080041 struct kmem_cache *slab;
Linus Torvalds1da177e2005-04-16 15:20:36 -070042 mempool_t *pool;
43};
44
James Bottomleyd3f46f32008-01-15 11:11:46 -060045#define SP(x) { x, "sgpool-" __stringify(x) }
46#if (SCSI_MAX_SG_SEGMENTS < 32)
47#error SCSI_MAX_SG_SEGMENTS is too small (must be 32 or greater)
48#endif
Adrian Bunk52c1da32005-06-23 22:05:33 -070049static struct scsi_host_sg_pool scsi_sg_pools[] = {
Linus Torvalds1da177e2005-04-16 15:20:36 -070050 SP(8),
51 SP(16),
FUJITA Tomonorifd820f42007-09-18 12:14:37 +020052#if (SCSI_MAX_SG_SEGMENTS > 32)
James Bottomleyd3f46f32008-01-15 11:11:46 -060053 SP(32),
FUJITA Tomonorifd820f42007-09-18 12:14:37 +020054#if (SCSI_MAX_SG_SEGMENTS > 64)
James Bottomleyd3f46f32008-01-15 11:11:46 -060055 SP(64),
56#if (SCSI_MAX_SG_SEGMENTS > 128)
Linus Torvalds1da177e2005-04-16 15:20:36 -070057 SP(128),
James Bottomleyd3f46f32008-01-15 11:11:46 -060058#if (SCSI_MAX_SG_SEGMENTS > 256)
59#error SCSI_MAX_SG_SEGMENTS is too large (256 MAX)
FUJITA Tomonorifd820f42007-09-18 12:14:37 +020060#endif
61#endif
62#endif
James Bottomleyd3f46f32008-01-15 11:11:46 -060063#endif
64 SP(SCSI_MAX_SG_SEGMENTS)
Jens Axboea8474ce2007-08-07 09:02:51 +020065};
Linus Torvalds1da177e2005-04-16 15:20:36 -070066#undef SP
67
Martin K. Petersen7027ad72008-07-17 17:08:48 -040068struct kmem_cache *scsi_sdb_cache;
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +020069
Tejun Heo a1bf9d1d2005-04-24 02:08:52 -050070static void scsi_run_queue(struct request_queue *q);
James Bottomleye91442b2005-09-09 10:44:16 -050071
72/*
73 * Function: scsi_unprep_request()
74 *
75 * Purpose: Remove all preparation done for a request, including its
76 * associated scsi_cmnd, so that it can be requeued.
77 *
78 * Arguments: req - request to unprepare
79 *
80 * Lock status: Assumed that no locks are held upon entry.
81 *
82 * Returns: Nothing.
83 */
84static void scsi_unprep_request(struct request *req)
85{
86 struct scsi_cmnd *cmd = req->special;
87
James Bottomley28018c22010-07-01 19:49:17 +090088 blk_unprep_request(req);
Christoph Hellwigbeb40482006-06-10 18:01:03 +020089 req->special = NULL;
James Bottomleye91442b2005-09-09 10:44:16 -050090
James Bottomleye91442b2005-09-09 10:44:16 -050091 scsi_put_command(cmd);
92}
Tejun Heo a1bf9d1d2005-04-24 02:08:52 -050093
James Bottomley4f5299a2009-01-02 10:42:21 -060094/**
95 * __scsi_queue_insert - private queue insertion
96 * @cmd: The SCSI command being requeued
97 * @reason: The reason for the requeue
98 * @unbusy: Whether the queue should be unbusied
Linus Torvalds1da177e2005-04-16 15:20:36 -070099 *
James Bottomley4f5299a2009-01-02 10:42:21 -0600100 * This is a private queue insertion. The public interface
101 * scsi_queue_insert() always assumes the queue should be unbusied
102 * because it's always called before the completion. This function is
103 * for a requeue after completion, which should only occur in this
104 * file.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105 */
James Bottomley4f5299a2009-01-02 10:42:21 -0600106static int __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107{
108 struct Scsi_Host *host = cmd->device->host;
109 struct scsi_device *device = cmd->device;
Mike Christief0c0a372008-08-17 15:24:38 -0500110 struct scsi_target *starget = scsi_target(device);
Tejun Heo a1bf9d1d2005-04-24 02:08:52 -0500111 struct request_queue *q = device->request_queue;
112 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113
114 SCSI_LOG_MLQUEUE(1,
115 printk("Inserting command %p into mlqueue\n", cmd));
116
117 /*
Tejun Heo d8c37e72005-05-14 00:46:08 +0900118 * Set the appropriate busy bit for the device/host.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119 *
120 * If the host/device isn't busy, assume that something actually
121 * completed, and that we should be able to queue a command now.
122 *
123 * Note that the prior mid-layer assumption that any host could
124 * always queue at least one command is now broken. The mid-layer
125 * will implement a user specifiable stall (see
126 * scsi_host.max_host_blocked and scsi_device.max_device_blocked)
127 * if a command is requeued with no other commands outstanding
128 * either for the device or for the host.
129 */
Mike Christief0c0a372008-08-17 15:24:38 -0500130 switch (reason) {
131 case SCSI_MLQUEUE_HOST_BUSY:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700132 host->host_blocked = host->max_host_blocked;
Mike Christief0c0a372008-08-17 15:24:38 -0500133 break;
134 case SCSI_MLQUEUE_DEVICE_BUSY:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135 device->device_blocked = device->max_device_blocked;
Mike Christief0c0a372008-08-17 15:24:38 -0500136 break;
137 case SCSI_MLQUEUE_TARGET_BUSY:
138 starget->target_blocked = starget->max_target_blocked;
139 break;
140 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700141
142 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143 * Decrement the counters, since these commands are no longer
144 * active on the host/device.
145 */
James Bottomley4f5299a2009-01-02 10:42:21 -0600146 if (unbusy)
147 scsi_device_unbusy(device);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148
149 /*
Tejun Heo a1bf9d1d2005-04-24 02:08:52 -0500150 * Requeue this command. It will go before all other commands
151 * that are already in the queue.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152 *
153 * NOTE: there is magic here about the way the queue is plugged if
154 * we have no outstanding commands.
155 *
Tejun Heo a1bf9d1d2005-04-24 02:08:52 -0500156 * Although we *don't* plug the queue, we call the request
Linus Torvalds1da177e2005-04-16 15:20:36 -0700157 * function. The SCSI request function detects the blocked condition
158 * and plugs the queue appropriately.
Tejun Heo a1bf9d1d2005-04-24 02:08:52 -0500159 */
160 spin_lock_irqsave(q->queue_lock, flags);
James Bottomley59897da2005-09-14 12:57:42 -0400161 blk_requeue_request(q, cmd->request);
Tejun Heo a1bf9d1d2005-04-24 02:08:52 -0500162 spin_unlock_irqrestore(q->queue_lock, flags);
163
164 scsi_run_queue(q);
165
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166 return 0;
167}
168
James Bottomley4f5299a2009-01-02 10:42:21 -0600169/*
170 * Function: scsi_queue_insert()
171 *
172 * Purpose: Insert a command in the midlevel queue.
173 *
174 * Arguments: cmd - command that we are adding to queue.
175 * reason - why we are inserting command to queue.
176 *
177 * Lock status: Assumed that lock is not held upon entry.
178 *
179 * Returns: Nothing.
180 *
181 * Notes: We do this for one of two cases. Either the host is busy
182 * and it cannot accept any more commands for the time being,
183 * or the device returned QUEUE_FULL and can accept no more
184 * commands.
185 * Notes: This could be called either from an interrupt context or a
186 * normal process context.
187 */
188int scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
189{
190 return __scsi_queue_insert(cmd, reason, 1);
191}
James Bottomley39216032005-06-15 18:48:29 -0500192/**
James Bottomley33aa6872005-08-28 11:31:14 -0500193 * scsi_execute - insert request and wait for the result
James Bottomley39216032005-06-15 18:48:29 -0500194 * @sdev: scsi device
195 * @cmd: scsi command
196 * @data_direction: data direction
197 * @buffer: data buffer
198 * @bufflen: len of buffer
199 * @sense: optional sense buffer
200 * @timeout: request timeout in seconds
201 * @retries: number of times to retry request
James Bottomley33aa6872005-08-28 11:31:14 -0500202 * @flags: or into request flags;
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900203 * @resid: optional residual length
James Bottomley39216032005-06-15 18:48:29 -0500204 *
Michael Opdenacker59c51592007-05-09 08:57:56 +0200205 * returns the req->errors value which is the scsi_cmnd result
James Bottomleyea73a9f2005-08-28 11:33:52 -0500206 * field.
Rob Landleyeb448202007-11-03 13:30:39 -0500207 */
James Bottomley33aa6872005-08-28 11:31:14 -0500208int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
209 int data_direction, void *buffer, unsigned bufflen,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900210 unsigned char *sense, int timeout, int retries, int flags,
211 int *resid)
James Bottomley39216032005-06-15 18:48:29 -0500212{
213 struct request *req;
214 int write = (data_direction == DMA_TO_DEVICE);
215 int ret = DRIVER_ERROR << 24;
216
217 req = blk_get_request(sdev->request_queue, write, __GFP_WAIT);
218
219 if (bufflen && blk_rq_map_kern(sdev->request_queue, req,
220 buffer, bufflen, __GFP_WAIT))
221 goto out;
222
223 req->cmd_len = COMMAND_SIZE(cmd[0]);
224 memcpy(req->cmd, cmd, req->cmd_len);
225 req->sense = sense;
226 req->sense_len = 0;
Mike Christie17e01f22005-11-11 05:31:37 -0600227 req->retries = retries;
James Bottomley39216032005-06-15 18:48:29 -0500228 req->timeout = timeout;
Jens Axboe4aff5e22006-08-10 08:44:47 +0200229 req->cmd_type = REQ_TYPE_BLOCK_PC;
230 req->cmd_flags |= flags | REQ_QUIET | REQ_PREEMPT;
James Bottomley39216032005-06-15 18:48:29 -0500231
232 /*
233 * head injection *required* here otherwise quiesce won't work
234 */
235 blk_execute_rq(req->q, NULL, req, 1);
236
Alan Sternbdb2b8c2008-06-24 14:03:14 -0400237 /*
238 * Some devices (USB mass-storage in particular) may transfer
239 * garbage data together with a residue indicating that the data
240 * is invalid. Prevent the garbage from being misinterpreted
241 * and prevent security leaks by zeroing out the excess data.
242 */
Tejun Heoc3a4d782009-05-07 22:24:37 +0900243 if (unlikely(req->resid_len > 0 && req->resid_len <= bufflen))
244 memset(buffer + (bufflen - req->resid_len), 0, req->resid_len);
Alan Sternbdb2b8c2008-06-24 14:03:14 -0400245
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900246 if (resid)
Tejun Heoc3a4d782009-05-07 22:24:37 +0900247 *resid = req->resid_len;
James Bottomley39216032005-06-15 18:48:29 -0500248 ret = req->errors;
249 out:
250 blk_put_request(req);
251
252 return ret;
253}
James Bottomley33aa6872005-08-28 11:31:14 -0500254EXPORT_SYMBOL(scsi_execute);
James Bottomley39216032005-06-15 18:48:29 -0500255
James Bottomleyea73a9f2005-08-28 11:33:52 -0500256
257int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd,
258 int data_direction, void *buffer, unsigned bufflen,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900259 struct scsi_sense_hdr *sshdr, int timeout, int retries,
260 int *resid)
James Bottomleyea73a9f2005-08-28 11:33:52 -0500261{
262 char *sense = NULL;
akpm@osdl.org1ccb48b2005-06-26 00:12:51 -0700263 int result;
264
James Bottomleyea73a9f2005-08-28 11:33:52 -0500265 if (sshdr) {
Jes Sorensen24669f752006-01-16 10:31:18 -0500266 sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
James Bottomleyea73a9f2005-08-28 11:33:52 -0500267 if (!sense)
268 return DRIVER_ERROR << 24;
James Bottomleyea73a9f2005-08-28 11:33:52 -0500269 }
akpm@osdl.org1ccb48b2005-06-26 00:12:51 -0700270 result = scsi_execute(sdev, cmd, data_direction, buffer, bufflen,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900271 sense, timeout, retries, 0, resid);
James Bottomleyea73a9f2005-08-28 11:33:52 -0500272 if (sshdr)
James Bottomleye5143852005-08-09 11:55:36 -0500273 scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, sshdr);
James Bottomleyea73a9f2005-08-28 11:33:52 -0500274
275 kfree(sense);
276 return result;
277}
278EXPORT_SYMBOL(scsi_execute_req);
279
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280/*
281 * Function: scsi_init_cmd_errh()
282 *
283 * Purpose: Initialize cmd fields related to error handling.
284 *
285 * Arguments: cmd - command that is ready to be queued.
286 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287 * Notes: This function has the job of initializing a number of
288 * fields related to error handling. Typically this will
289 * be called once for each command, as required.
290 */
Christoph Hellwig631c2282006-07-08 20:42:15 +0200291static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700292{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700293 cmd->serial_number = 0;
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200294 scsi_set_resid(cmd, 0);
FUJITA Tomonorib80ca4f2008-01-13 15:46:13 +0900295 memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700296 if (cmd->cmd_len == 0)
Boaz Harroshdb4742d2008-04-30 11:27:26 +0300297 cmd->cmd_len = scsi_command_size(cmd->cmnd);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298}
299
300void scsi_device_unbusy(struct scsi_device *sdev)
301{
302 struct Scsi_Host *shost = sdev->host;
Mike Christief0c0a372008-08-17 15:24:38 -0500303 struct scsi_target *starget = scsi_target(sdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700304 unsigned long flags;
305
306 spin_lock_irqsave(shost->host_lock, flags);
307 shost->host_busy--;
Mike Christief0c0a372008-08-17 15:24:38 -0500308 starget->target_busy--;
James Bottomley939647e2005-09-18 15:05:20 -0500309 if (unlikely(scsi_host_in_recovery(shost) &&
Tejun Heoee7863b2006-05-15 20:57:20 +0900310 (shost->host_failed || shost->host_eh_scheduled)))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700311 scsi_eh_wakeup(shost);
312 spin_unlock(shost->host_lock);
152587d2005-04-12 16:22:06 -0500313 spin_lock(sdev->request_queue->queue_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700314 sdev->device_busy--;
152587d2005-04-12 16:22:06 -0500315 spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700316}
317
318/*
319 * Called for single_lun devices on IO completion. Clear starget_sdev_user,
320 * and call blk_run_queue for all the scsi_devices on the target -
321 * including current_sdev first.
322 *
323 * Called with *no* scsi locks held.
324 */
325static void scsi_single_lun_run(struct scsi_device *current_sdev)
326{
327 struct Scsi_Host *shost = current_sdev->host;
328 struct scsi_device *sdev, *tmp;
329 struct scsi_target *starget = scsi_target(current_sdev);
330 unsigned long flags;
331
332 spin_lock_irqsave(shost->host_lock, flags);
333 starget->starget_sdev_user = NULL;
334 spin_unlock_irqrestore(shost->host_lock, flags);
335
336 /*
337 * Call blk_run_queue for all LUNs on the target, starting with
338 * current_sdev. We race with others (to set starget_sdev_user),
339 * but in most cases, we will be first. Ideally, each LU on the
340 * target would get some limited time or requests on the target.
341 */
342 blk_run_queue(current_sdev->request_queue);
343
344 spin_lock_irqsave(shost->host_lock, flags);
345 if (starget->starget_sdev_user)
346 goto out;
347 list_for_each_entry_safe(sdev, tmp, &starget->devices,
348 same_target_siblings) {
349 if (sdev == current_sdev)
350 continue;
351 if (scsi_device_get(sdev))
352 continue;
353
354 spin_unlock_irqrestore(shost->host_lock, flags);
355 blk_run_queue(sdev->request_queue);
356 spin_lock_irqsave(shost->host_lock, flags);
357
358 scsi_device_put(sdev);
359 }
360 out:
361 spin_unlock_irqrestore(shost->host_lock, flags);
362}
363
Kiyoshi Ueda9d112512008-10-04 14:11:06 -0400364static inline int scsi_device_is_busy(struct scsi_device *sdev)
365{
366 if (sdev->device_busy >= sdev->queue_depth || sdev->device_blocked)
367 return 1;
368
369 return 0;
370}
371
Mike Christief0c0a372008-08-17 15:24:38 -0500372static inline int scsi_target_is_busy(struct scsi_target *starget)
373{
374 return ((starget->can_queue > 0 &&
375 starget->target_busy >= starget->can_queue) ||
376 starget->target_blocked);
377}
378
Kiyoshi Ueda9d112512008-10-04 14:11:06 -0400379static inline int scsi_host_is_busy(struct Scsi_Host *shost)
380{
381 if ((shost->can_queue > 0 && shost->host_busy >= shost->can_queue) ||
382 shost->host_blocked || shost->host_self_blocked)
383 return 1;
384
385 return 0;
386}
387
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388/*
389 * Function: scsi_run_queue()
390 *
391 * Purpose: Select a proper request queue to serve next
392 *
393 * Arguments: q - last request's queue
394 *
395 * Returns: Nothing
396 *
397 * Notes: The previous command was completely finished, start
398 * a new one if possible.
399 */
400static void scsi_run_queue(struct request_queue *q)
401{
Mike Christie2a3a59e2008-11-11 13:42:35 -0600402 struct scsi_device *sdev = q->queuedata;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700403 struct Scsi_Host *shost = sdev->host;
Mike Christie2a3a59e2008-11-11 13:42:35 -0600404 LIST_HEAD(starved_list);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405 unsigned long flags;
406
Tony Battersby25d7c362007-11-12 10:00:44 -0500407 if (scsi_target(sdev)->single_lun)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700408 scsi_single_lun_run(sdev);
409
410 spin_lock_irqsave(shost->host_lock, flags);
Mike Christie2a3a59e2008-11-11 13:42:35 -0600411 list_splice_init(&shost->starved_list, &starved_list);
412
413 while (!list_empty(&starved_list)) {
Nick Piggin75ad23b2008-04-29 14:48:33 +0200414 int flagset;
415
Linus Torvalds1da177e2005-04-16 15:20:36 -0700416 /*
417 * As long as shost is accepting commands and we have
418 * starved queues, call blk_run_queue. scsi_request_fn
419 * drops the queue_lock and can add us back to the
420 * starved_list.
421 *
422 * host_lock protects the starved_list and starved_entry.
423 * scsi_request_fn must get the host_lock before checking
424 * or modifying starved_list or starved_entry.
425 */
Mike Christie2a3a59e2008-11-11 13:42:35 -0600426 if (scsi_host_is_busy(shost))
Mike Christief0c0a372008-08-17 15:24:38 -0500427 break;
Mike Christief0c0a372008-08-17 15:24:38 -0500428
Mike Christie2a3a59e2008-11-11 13:42:35 -0600429 sdev = list_entry(starved_list.next,
430 struct scsi_device, starved_entry);
431 list_del_init(&sdev->starved_entry);
Mike Christief0c0a372008-08-17 15:24:38 -0500432 if (scsi_target_is_busy(scsi_target(sdev))) {
433 list_move_tail(&sdev->starved_entry,
434 &shost->starved_list);
435 continue;
436 }
437
Nick Piggin75ad23b2008-04-29 14:48:33 +0200438 spin_unlock(shost->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700439
Nick Piggin75ad23b2008-04-29 14:48:33 +0200440 spin_lock(sdev->request_queue->queue_lock);
441 flagset = test_bit(QUEUE_FLAG_REENTER, &q->queue_flags) &&
442 !test_bit(QUEUE_FLAG_REENTER,
443 &sdev->request_queue->queue_flags);
444 if (flagset)
445 queue_flag_set(QUEUE_FLAG_REENTER, sdev->request_queue);
446 __blk_run_queue(sdev->request_queue);
447 if (flagset)
448 queue_flag_clear(QUEUE_FLAG_REENTER, sdev->request_queue);
449 spin_unlock(sdev->request_queue->queue_lock);
Andreas Herrmann04846f22006-08-09 17:31:16 +0200450
Nick Piggin75ad23b2008-04-29 14:48:33 +0200451 spin_lock(shost->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700452 }
Mike Christie2a3a59e2008-11-11 13:42:35 -0600453 /* put any unprocessed entries back */
454 list_splice(&starved_list, &shost->starved_list);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700455 spin_unlock_irqrestore(shost->host_lock, flags);
456
457 blk_run_queue(q);
458}
459
460/*
461 * Function: scsi_requeue_command()
462 *
463 * Purpose: Handle post-processing of completed commands.
464 *
465 * Arguments: q - queue to operate on
466 * cmd - command that may need to be requeued.
467 *
468 * Returns: Nothing
469 *
470 * Notes: After command completion, there may be blocks left
471 * over which weren't finished by the previous command
472 * this can be for a number of reasons - the main one is
473 * I/O errors in the middle of the request, in which case
474 * we need to request the blocks that come after the bad
475 * sector.
James Bottomleye91442b2005-09-09 10:44:16 -0500476 * Notes: Upon return, cmd is a stale pointer.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477 */
478static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd)
479{
James Bottomleye91442b2005-09-09 10:44:16 -0500480 struct request *req = cmd->request;
Tejun Heo 283369c2005-04-24 02:06:36 -0500481 unsigned long flags;
482
Tejun Heo 283369c2005-04-24 02:06:36 -0500483 spin_lock_irqsave(q->queue_lock, flags);
James Bottomley02bd3492008-12-12 13:28:29 -0600484 scsi_unprep_request(req);
James Bottomleye91442b2005-09-09 10:44:16 -0500485 blk_requeue_request(q, req);
Tejun Heo 283369c2005-04-24 02:06:36 -0500486 spin_unlock_irqrestore(q->queue_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487
488 scsi_run_queue(q);
489}
490
491void scsi_next_command(struct scsi_cmnd *cmd)
492{
Linus Torvalds49d7bc62005-12-12 11:25:04 -0800493 struct scsi_device *sdev = cmd->device;
494 struct request_queue *q = sdev->request_queue;
495
496 /* need to hold a reference on the device before we let go of the cmd */
497 get_device(&sdev->sdev_gendev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700498
499 scsi_put_command(cmd);
500 scsi_run_queue(q);
Linus Torvalds49d7bc62005-12-12 11:25:04 -0800501
502 /* ok to remove device now */
503 put_device(&sdev->sdev_gendev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700504}
505
506void scsi_run_host_queues(struct Scsi_Host *shost)
507{
508 struct scsi_device *sdev;
509
510 shost_for_each_device(sdev, shost)
511 scsi_run_queue(sdev->request_queue);
512}
513
James Bottomley79ed2422009-01-06 13:15:20 -0600514static void __scsi_release_buffers(struct scsi_cmnd *, int);
515
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516/*
517 * Function: scsi_end_request()
518 *
519 * Purpose: Post-processing of completed commands (usually invoked at end
520 * of upper level post-processing and scsi_io_completion).
521 *
522 * Arguments: cmd - command that is complete.
Kiyoshi Ueda610d8b02007-12-11 17:52:09 -0500523 * error - 0 if I/O indicates success, < 0 for I/O error.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700524 * bytes - number of bytes of completed I/O
525 * requeue - indicates whether we should requeue leftovers.
526 *
527 * Lock status: Assumed that lock is not held upon entry.
528 *
James Bottomleye91442b2005-09-09 10:44:16 -0500529 * Returns: cmd if requeue required, NULL otherwise.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700530 *
531 * Notes: This is called for block device requests in order to
532 * mark some number of sectors as complete.
533 *
534 * We are guaranteeing that the request queue will be goosed
535 * at some point during this call.
James Bottomleye91442b2005-09-09 10:44:16 -0500536 * Notes: If cmd was requeued, upon return it will be a stale pointer.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537 */
Kiyoshi Ueda610d8b02007-12-11 17:52:09 -0500538static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700539 int bytes, int requeue)
540{
Jens Axboe165125e2007-07-24 09:28:11 +0200541 struct request_queue *q = cmd->device->request_queue;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700542 struct request *req = cmd->request;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543
544 /*
545 * If there are blocks left over at the end, set up the command
546 * to queue the remainder of them.
547 */
Kiyoshi Ueda610d8b02007-12-11 17:52:09 -0500548 if (blk_end_request(req, error, bytes)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549 /* kill remainder if no retrys */
Mike Christie4a274462008-08-19 18:45:31 -0500550 if (error && scsi_noretry_cmd(cmd))
Tejun Heoe4588242009-05-12 08:49:32 +0200551 blk_end_request_all(req, error);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700552 else {
James Bottomleye91442b2005-09-09 10:44:16 -0500553 if (requeue) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700554 /*
555 * Bleah. Leftovers again. Stick the
556 * leftovers in the front of the
557 * queue, and goose the queue again.
558 */
James Bottomley79ed2422009-01-06 13:15:20 -0600559 scsi_release_buffers(cmd);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700560 scsi_requeue_command(q, cmd);
James Bottomleye91442b2005-09-09 10:44:16 -0500561 cmd = NULL;
562 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700563 return cmd;
564 }
565 }
566
Linus Torvalds1da177e2005-04-16 15:20:36 -0700567 /*
568 * This will goose the queue request function at the end, so we don't
569 * need to worry about launching another command.
570 */
James Bottomley79ed2422009-01-06 13:15:20 -0600571 __scsi_release_buffers(cmd, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700572 scsi_next_command(cmd);
573 return NULL;
574}
575
Jens Axboea8474ce2007-08-07 09:02:51 +0200576static inline unsigned int scsi_sgtable_index(unsigned short nents)
577{
578 unsigned int index;
579
James Bottomleyd3f46f32008-01-15 11:11:46 -0600580 BUG_ON(nents > SCSI_MAX_SG_SEGMENTS);
581
582 if (nents <= 8)
Jens Axboea8474ce2007-08-07 09:02:51 +0200583 index = 0;
James Bottomleyd3f46f32008-01-15 11:11:46 -0600584 else
585 index = get_count_order(nents) - 3;
Jens Axboea8474ce2007-08-07 09:02:51 +0200586
587 return index;
588}
589
Jens Axboe5ed79592007-11-15 09:13:11 +0100590static void scsi_sg_free(struct scatterlist *sgl, unsigned int nents)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591{
592 struct scsi_host_sg_pool *sgp;
Jens Axboe5ed79592007-11-15 09:13:11 +0100593
594 sgp = scsi_sg_pools + scsi_sgtable_index(nents);
595 mempool_free(sgl, sgp->pool);
596}
597
598static struct scatterlist *scsi_sg_alloc(unsigned int nents, gfp_t gfp_mask)
599{
600 struct scsi_host_sg_pool *sgp;
601
602 sgp = scsi_sg_pools + scsi_sgtable_index(nents);
603 return mempool_alloc(sgp->pool, gfp_mask);
604}
605
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200606static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents,
607 gfp_t gfp_mask)
Jens Axboe5ed79592007-11-15 09:13:11 +0100608{
609 int ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700610
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200611 BUG_ON(!nents);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700612
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200613 ret = __sg_alloc_table(&sdb->table, nents, SCSI_MAX_SG_SEGMENTS,
614 gfp_mask, scsi_sg_alloc);
Jens Axboe5ed79592007-11-15 09:13:11 +0100615 if (unlikely(ret))
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200616 __sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS,
James Bottomley7cedb1f2008-01-13 14:15:28 -0600617 scsi_sg_free);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700618
Jens Axboea8474ce2007-08-07 09:02:51 +0200619 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700620}
621
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200622static void scsi_free_sgtable(struct scsi_data_buffer *sdb)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700623{
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200624 __sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, scsi_sg_free);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700625}
626
James Bottomley79ed2422009-01-06 13:15:20 -0600627static void __scsi_release_buffers(struct scsi_cmnd *cmd, int do_bidi_check)
628{
629
630 if (cmd->sdb.table.nents)
631 scsi_free_sgtable(&cmd->sdb);
632
633 memset(&cmd->sdb, 0, sizeof(cmd->sdb));
634
635 if (do_bidi_check && scsi_bidi_cmnd(cmd)) {
636 struct scsi_data_buffer *bidi_sdb =
637 cmd->request->next_rq->special;
638 scsi_free_sgtable(bidi_sdb);
639 kmem_cache_free(scsi_sdb_cache, bidi_sdb);
640 cmd->request->next_rq->special = NULL;
641 }
642
643 if (scsi_prot_sg_count(cmd))
644 scsi_free_sgtable(cmd->prot_sdb);
645}
646
Linus Torvalds1da177e2005-04-16 15:20:36 -0700647/*
648 * Function: scsi_release_buffers()
649 *
650 * Purpose: Completion processing for block device I/O requests.
651 *
652 * Arguments: cmd - command that we are bailing.
653 *
654 * Lock status: Assumed that no lock is held upon entry.
655 *
656 * Returns: Nothing
657 *
658 * Notes: In the event that an upper level driver rejects a
659 * command, we must release resources allocated during
660 * the __init_io() function. Primarily this would involve
661 * the scatter-gather table, and potentially any bounce
662 * buffers.
663 */
Boaz Harroshbb52d822007-12-13 16:14:27 -0800664void scsi_release_buffers(struct scsi_cmnd *cmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700665{
James Bottomley79ed2422009-01-06 13:15:20 -0600666 __scsi_release_buffers(cmd, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700667}
Boaz Harroshbb52d822007-12-13 16:14:27 -0800668EXPORT_SYMBOL(scsi_release_buffers);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700669
670/*
671 * Function: scsi_io_completion()
672 *
673 * Purpose: Completion processing for block device I/O requests.
674 *
675 * Arguments: cmd - command that is finished.
676 *
677 * Lock status: Assumed that no lock is held upon entry.
678 *
679 * Returns: Nothing
680 *
681 * Notes: This function is matched in terms of capabilities to
682 * the function that created the scatter-gather list.
683 * In other words, if there are no bounce buffers
684 * (the normal case for most drivers), we don't need
685 * the logic to deal with cleaning up afterwards.
686 *
Alan Sternb60af5b2008-11-03 15:56:47 -0500687 * We must call scsi_end_request(). This will finish off
688 * the specified number of sectors. If we are done, the
689 * command block will be released and the queue function
690 * will be goosed. If we are not done then we have to
691 * figure out what to do next:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700692 *
Alan Sternb60af5b2008-11-03 15:56:47 -0500693 * a) We can call scsi_requeue_command(). The request
694 * will be unprepared and put back on the queue. Then
695 * a new command will be created for it. This should
696 * be used if we made forward progress, or if we want
697 * to switch from READ(10) to READ(6) for example.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700698 *
Alan Sternb60af5b2008-11-03 15:56:47 -0500699 * b) We can call scsi_queue_insert(). The request will
700 * be put back on the queue and retried using the same
701 * command as before, possibly after a delay.
702 *
703 * c) We can call blk_end_request() with -EIO to fail
704 * the remainder of the request.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700705 */
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700706void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700707{
708 int result = cmd->result;
Jens Axboe165125e2007-07-24 09:28:11 +0200709 struct request_queue *q = cmd->device->request_queue;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700710 struct request *req = cmd->request;
James Bottomleyfa8e36c2008-04-02 18:11:52 -0500711 int error = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700712 struct scsi_sense_hdr sshdr;
713 int sense_valid = 0;
714 int sense_deferred = 0;
Alan Sternb60af5b2008-11-03 15:56:47 -0500715 enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
716 ACTION_DELAYED_RETRY} action;
717 char *description = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718
Linus Torvalds1da177e2005-04-16 15:20:36 -0700719 if (result) {
720 sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
721 if (sense_valid)
722 sense_deferred = scsi_sense_is_deferred(&sshdr);
723 }
Christoph Hellwig631c2282006-07-08 20:42:15 +0200724
Christoph Hellwig33659eb2010-08-07 18:17:56 +0200725 if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700726 req->errors = result;
727 if (result) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700728 if (sense_valid && req->sense) {
729 /*
730 * SG_IO wants current and deferred errors
731 */
732 int len = 8 + cmd->sense_buffer[7];
733
734 if (len > SCSI_SENSE_BUFFERSIZE)
735 len = SCSI_SENSE_BUFFERSIZE;
736 memcpy(req->sense, cmd->sense_buffer, len);
737 req->sense_len = len;
738 }
James Bottomleyfa8e36c2008-04-02 18:11:52 -0500739 if (!sense_deferred)
740 error = -EIO;
Pete Wyckoffb22f6872007-03-13 16:53:28 -0400741 }
FUJITA Tomonorie6bb7a962009-05-11 17:56:08 +0900742
743 req->resid_len = scsi_get_resid(cmd);
744
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200745 if (scsi_bidi_cmnd(cmd)) {
FUJITA Tomonorie6bb7a962009-05-11 17:56:08 +0900746 /*
747 * Bidi commands Must be complete as a whole,
748 * both sides at once.
749 */
750 req->next_rq->resid_len = scsi_in(cmd)->resid;
751
Boaz Harrosh63c43b02009-12-15 17:25:43 +0200752 scsi_release_buffers(cmd);
FUJITA Tomonorie6bb7a962009-05-11 17:56:08 +0900753 blk_end_request_all(req, 0);
754
FUJITA Tomonorie6bb7a962009-05-11 17:56:08 +0900755 scsi_next_command(cmd);
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200756 return;
757 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700758 }
759
Christoph Hellwig33659eb2010-08-07 18:17:56 +0200760 /* no bidi support for !REQ_TYPE_BLOCK_PC yet */
761 BUG_ON(blk_bidi_rq(req));
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200762
Linus Torvalds1da177e2005-04-16 15:20:36 -0700763 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700764 * Next deal with any sectors which we were able to correctly
765 * handle.
766 */
Tejun Heo83096eb2009-05-07 22:24:39 +0900767 SCSI_LOG_HLCOMPLETE(1, printk("%u sectors total, "
James Bottomleyd6b0c532006-07-02 10:06:28 -0500768 "%d bytes done.\n",
Tejun Heo83096eb2009-05-07 22:24:39 +0900769 blk_rq_sectors(req), good_bytes));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700770
James Bottomleya9bddd72009-03-30 16:55:51 +0000771 /*
772 * Recovered errors need reporting, but they're always treated
773 * as success, so fiddle the result code here. For BLOCK_PC
774 * we already took a copy of the original into rq->errors which
775 * is what gets returned to the user
776 */
Douglas Gilberte7efe592010-01-03 13:51:15 -0500777 if (sense_valid && (sshdr.sense_key == RECOVERED_ERROR)) {
778 /* if ATA PASS-THROUGH INFORMATION AVAILABLE skip
779 * print since caller wants ATA registers. Only occurs on
780 * SCSI ATA PASS_THROUGH commands when CK_COND=1
781 */
782 if ((sshdr.asc == 0x0) && (sshdr.ascq == 0x1d))
783 ;
784 else if (!(req->cmd_flags & REQ_QUIET))
James Bottomleya9bddd72009-03-30 16:55:51 +0000785 scsi_print_sense("", cmd);
786 result = 0;
787 /* BLOCK_PC may have set error */
788 error = 0;
789 }
790
791 /*
792 * A number of bytes were successfully read. If there
James Bottomleyd6b0c532006-07-02 10:06:28 -0500793 * are leftovers and there is some kind of error
794 * (result != 0), retry the rest.
795 */
James Bottomleyfa8e36c2008-04-02 18:11:52 -0500796 if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
James Bottomleyd6b0c532006-07-02 10:06:28 -0500797 return;
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700798
Martin K. Petersen3e695f82009-01-04 03:04:31 -0500799 error = -EIO;
800
Alan Sternb60af5b2008-11-03 15:56:47 -0500801 if (host_byte(result) == DID_RESET) {
802 /* Third party bus reset or reset for error recovery
803 * reasons. Just retry the command and see what
804 * happens.
805 */
806 action = ACTION_RETRY;
807 } else if (sense_valid && !sense_deferred) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700808 switch (sshdr.sense_key) {
809 case UNIT_ATTENTION:
810 if (cmd->device->removable) {
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700811 /* Detected disc change. Set a bit
Linus Torvalds1da177e2005-04-16 15:20:36 -0700812 * and quietly refuse further access.
813 */
814 cmd->device->changed = 1;
Alan Sternb60af5b2008-11-03 15:56:47 -0500815 description = "Media Changed";
816 action = ACTION_FAIL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700817 } else {
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700818 /* Must have been a power glitch, or a
819 * bus reset. Could not have been a
820 * media change, so we just retry the
Alan Sternb60af5b2008-11-03 15:56:47 -0500821 * command and see what happens.
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700822 */
Alan Sternb60af5b2008-11-03 15:56:47 -0500823 action = ACTION_RETRY;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700824 }
825 break;
826 case ILLEGAL_REQUEST:
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700827 /* If we had an ILLEGAL REQUEST returned, then
828 * we may have performed an unsupported
829 * command. The only thing this should be
830 * would be a ten byte read where only a six
831 * byte read was supported. Also, on a system
832 * where READ CAPACITY failed, we may have
833 * read past the end of the disk.
834 */
Jens Axboe26a68012005-11-29 21:03:34 +0100835 if ((cmd->device->use_10_for_rw &&
836 sshdr.asc == 0x20 && sshdr.ascq == 0x00) &&
Linus Torvalds1da177e2005-04-16 15:20:36 -0700837 (cmd->cmnd[0] == READ_10 ||
838 cmd->cmnd[0] == WRITE_10)) {
Alan Sternb60af5b2008-11-03 15:56:47 -0500839 /* This will issue a new 6-byte command. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700840 cmd->device->use_10_for_rw = 0;
Alan Sternb60af5b2008-11-03 15:56:47 -0500841 action = ACTION_REPREP;
Martin K. Petersen3e695f82009-01-04 03:04:31 -0500842 } else if (sshdr.asc == 0x10) /* DIX */ {
843 description = "Host Data Integrity Failure";
844 action = ACTION_FAIL;
845 error = -EILSEQ;
Alan Sternb60af5b2008-11-03 15:56:47 -0500846 } else
847 action = ACTION_FAIL;
848 break;
Martin K. Petersen511e44f2008-07-17 04:28:33 -0400849 case ABORTED_COMMAND:
James Bottomley126c09822009-02-19 21:48:54 +0000850 action = ACTION_FAIL;
Martin K. Petersen511e44f2008-07-17 04:28:33 -0400851 if (sshdr.asc == 0x10) { /* DIF */
Martin K. Petersen3e695f82009-01-04 03:04:31 -0500852 description = "Target Data Integrity Failure";
Martin K. Petersen3e695f82009-01-04 03:04:31 -0500853 error = -EILSEQ;
James Bottomley126c09822009-02-19 21:48:54 +0000854 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700855 break;
856 case NOT_READY:
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700857 /* If the device is in the process of becoming
James Bottomleyf3e93f72006-04-25 16:48:30 -0500858 * ready, or has a temporary blockage, retry.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700859 */
James Bottomleyf3e93f72006-04-25 16:48:30 -0500860 if (sshdr.asc == 0x04) {
861 switch (sshdr.ascq) {
862 case 0x01: /* becoming ready */
863 case 0x04: /* format in progress */
864 case 0x05: /* rebuild in progress */
865 case 0x06: /* recalculation in progress */
866 case 0x07: /* operation in progress */
867 case 0x08: /* Long write in progress */
868 case 0x09: /* self test in progress */
Martin K. Petersend8705f12009-11-26 12:00:41 -0500869 case 0x14: /* space allocation in progress */
Alan Sternb60af5b2008-11-03 15:56:47 -0500870 action = ACTION_DELAYED_RETRY;
James Bottomleyf3e93f72006-04-25 16:48:30 -0500871 break;
Alan Stern3dbf6a52008-12-15 10:31:28 -0500872 default:
873 description = "Device not ready";
874 action = ACTION_FAIL;
875 break;
James Bottomleyf3e93f72006-04-25 16:48:30 -0500876 }
Alan Sternb60af5b2008-11-03 15:56:47 -0500877 } else {
878 description = "Device not ready";
879 action = ACTION_FAIL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700880 }
Alan Sternb60af5b2008-11-03 15:56:47 -0500881 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700882 case VOLUME_OVERFLOW:
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700883 /* See SSC3rXX or current. */
Alan Sternb60af5b2008-11-03 15:56:47 -0500884 action = ACTION_FAIL;
885 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700886 default:
Alan Sternb60af5b2008-11-03 15:56:47 -0500887 description = "Unhandled sense code";
888 action = ACTION_FAIL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700889 break;
890 }
Alan Sternb60af5b2008-11-03 15:56:47 -0500891 } else {
892 description = "Unhandled error code";
893 action = ACTION_FAIL;
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700894 }
Alan Sternb60af5b2008-11-03 15:56:47 -0500895
896 switch (action) {
897 case ACTION_FAIL:
898 /* Give up and fail the remainder of the request */
James Bottomley79ed2422009-01-06 13:15:20 -0600899 scsi_release_buffers(cmd);
Jens Axboe4aff5e22006-08-10 08:44:47 +0200900 if (!(req->cmd_flags & REQ_QUIET)) {
Alan Sternb60af5b2008-11-03 15:56:47 -0500901 if (description)
Alan Stern3dbf6a52008-12-15 10:31:28 -0500902 scmd_printk(KERN_INFO, cmd, "%s\n",
Alan Sternb60af5b2008-11-03 15:56:47 -0500903 description);
Martin K. Petersena4d04a42007-02-27 22:40:27 -0500904 scsi_print_result(cmd);
James Bottomley3173d8c2005-09-04 11:32:05 -0500905 if (driver_byte(result) & DRIVER_SENSE)
906 scsi_print_sense("", cmd);
Martin K. Petersen002b1eb2009-05-23 11:45:07 -0400907 scsi_print_command(cmd);
James Bottomley3173d8c2005-09-04 11:32:05 -0500908 }
Mike Christiead630822009-09-28 15:50:52 -0500909 if (blk_end_request_err(req, error))
Tejun Heoda6c5c72009-09-11 14:26:40 +0200910 scsi_requeue_command(q, cmd);
911 else
912 scsi_next_command(cmd);
Alan Sternb60af5b2008-11-03 15:56:47 -0500913 break;
914 case ACTION_REPREP:
915 /* Unprep the request and put it back at the head of the queue.
916 * A new command will be prepared and issued.
917 */
James Bottomley79ed2422009-01-06 13:15:20 -0600918 scsi_release_buffers(cmd);
Alan Sternb60af5b2008-11-03 15:56:47 -0500919 scsi_requeue_command(q, cmd);
920 break;
921 case ACTION_RETRY:
922 /* Retry the same command immediately */
James Bottomley4f5299a2009-01-02 10:42:21 -0600923 __scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY, 0);
Alan Sternb60af5b2008-11-03 15:56:47 -0500924 break;
925 case ACTION_DELAYED_RETRY:
926 /* Retry the same command after a delay */
James Bottomley4f5299a2009-01-02 10:42:21 -0600927 __scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, 0);
Alan Sternb60af5b2008-11-03 15:56:47 -0500928 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700929 }
930}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700931
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200932static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
933 gfp_t gfp_mask)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700934{
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200935 int count;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700936
937 /*
Christoph Hellwig3b003152006-11-04 20:10:55 +0100938 * If sg table allocation fails, requeue request later.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700939 */
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200940 if (unlikely(scsi_alloc_sgtable(sdb, req->nr_phys_segments,
941 gfp_mask))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700942 return BLKPREP_DEFER;
Alan Stern7c72ce82005-10-14 11:23:27 -0400943 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700944
Christoph Hellwig3b003152006-11-04 20:10:55 +0100945 req->buffer = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700946
947 /*
948 * Next, walk the list, and fill in the addresses and sizes of
949 * each segment.
950 */
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200951 count = blk_rq_map_sg(req->q, req, sdb->table.sgl);
952 BUG_ON(count > sdb->table.nents);
953 sdb->table.nents = count;
Tejun Heo1011c1b2009-05-07 22:24:45 +0900954 sdb->length = blk_rq_bytes(req);
Rusty Russell4a03d902007-11-19 11:28:48 +1100955 return BLKPREP_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700956}
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200957
958/*
959 * Function: scsi_init_io()
960 *
961 * Purpose: SCSI I/O initialize function.
962 *
963 * Arguments: cmd - Command descriptor we wish to initialize
964 *
965 * Returns: 0 on success
966 * BLKPREP_DEFER if the failure is retryable
967 * BLKPREP_KILL if the failure is fatal
968 */
969int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask)
970{
Martin K. Petersen13f05c82010-09-10 20:50:10 +0200971 struct request *rq = cmd->request;
972
973 int error = scsi_init_sgtable(rq, &cmd->sdb, gfp_mask);
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200974 if (error)
975 goto err_exit;
976
Martin K. Petersen13f05c82010-09-10 20:50:10 +0200977 if (blk_bidi_rq(rq)) {
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200978 struct scsi_data_buffer *bidi_sdb = kmem_cache_zalloc(
Martin K. Petersen6362abd2008-06-05 23:30:03 -0400979 scsi_sdb_cache, GFP_ATOMIC);
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200980 if (!bidi_sdb) {
981 error = BLKPREP_DEFER;
982 goto err_exit;
983 }
984
Martin K. Petersen13f05c82010-09-10 20:50:10 +0200985 rq->next_rq->special = bidi_sdb;
986 error = scsi_init_sgtable(rq->next_rq, bidi_sdb, GFP_ATOMIC);
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200987 if (error)
988 goto err_exit;
989 }
990
Martin K. Petersen13f05c82010-09-10 20:50:10 +0200991 if (blk_integrity_rq(rq)) {
Martin K. Petersen7027ad72008-07-17 17:08:48 -0400992 struct scsi_data_buffer *prot_sdb = cmd->prot_sdb;
993 int ivecs, count;
994
995 BUG_ON(prot_sdb == NULL);
Martin K. Petersen13f05c82010-09-10 20:50:10 +0200996 ivecs = blk_rq_count_integrity_sg(rq->q, rq->bio);
Martin K. Petersen7027ad72008-07-17 17:08:48 -0400997
998 if (scsi_alloc_sgtable(prot_sdb, ivecs, gfp_mask)) {
999 error = BLKPREP_DEFER;
1000 goto err_exit;
1001 }
1002
Martin K. Petersen13f05c82010-09-10 20:50:10 +02001003 count = blk_rq_map_integrity_sg(rq->q, rq->bio,
Martin K. Petersen7027ad72008-07-17 17:08:48 -04001004 prot_sdb->table.sgl);
1005 BUG_ON(unlikely(count > ivecs));
Martin K. Petersen13f05c82010-09-10 20:50:10 +02001006 BUG_ON(unlikely(count > queue_max_integrity_segments(rq->q)));
Martin K. Petersen7027ad72008-07-17 17:08:48 -04001007
1008 cmd->prot_sdb = prot_sdb;
1009 cmd->prot_sdb->table.nents = count;
1010 }
1011
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +02001012 return BLKPREP_OK ;
1013
1014err_exit:
1015 scsi_release_buffers(cmd);
FUJITA Tomonori610a6342010-07-08 10:16:17 +02001016 cmd->request->special = NULL;
James Bottomley3a5c19c2010-08-16 10:06:26 -05001017 scsi_put_command(cmd);
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +02001018 return error;
1019}
Boaz Harroshbb52d822007-12-13 16:14:27 -08001020EXPORT_SYMBOL(scsi_init_io);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001021
Christoph Hellwig3b003152006-11-04 20:10:55 +01001022static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
1023 struct request *req)
1024{
1025 struct scsi_cmnd *cmd;
1026
1027 if (!req->special) {
1028 cmd = scsi_get_command(sdev, GFP_ATOMIC);
1029 if (unlikely(!cmd))
1030 return NULL;
1031 req->special = cmd;
1032 } else {
1033 cmd = req->special;
1034 }
1035
1036 /* pull a tag out of the request if we have one */
1037 cmd->tag = req->tag;
1038 cmd->request = req;
1039
Boaz Harrosh64a87b22008-04-30 11:19:47 +03001040 cmd->cmnd = req->cmd;
1041
Christoph Hellwig3b003152006-11-04 20:10:55 +01001042 return cmd;
1043}
1044
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001045int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
James Bottomley7b163182005-12-15 20:17:02 -06001046{
Christoph Hellwig3b003152006-11-04 20:10:55 +01001047 struct scsi_cmnd *cmd;
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001048 int ret = scsi_prep_state_check(sdev, req);
1049
1050 if (ret != BLKPREP_OK)
1051 return ret;
Christoph Hellwig3b003152006-11-04 20:10:55 +01001052
1053 cmd = scsi_get_cmd_from_req(sdev, req);
1054 if (unlikely(!cmd))
1055 return BLKPREP_DEFER;
1056
1057 /*
1058 * BLOCK_PC requests may transfer data, in which case they must
1059 * a bio attached to them. Or they might contain a SCSI command
1060 * that does not transfer data, in which case they may optionally
1061 * submit a request without an attached bio.
1062 */
1063 if (req->bio) {
1064 int ret;
1065
1066 BUG_ON(!req->nr_phys_segments);
1067
Boaz Harroshbb52d822007-12-13 16:14:27 -08001068 ret = scsi_init_io(cmd, GFP_ATOMIC);
Christoph Hellwig3b003152006-11-04 20:10:55 +01001069 if (unlikely(ret))
1070 return ret;
1071 } else {
Tejun Heob0790412009-05-07 22:24:42 +09001072 BUG_ON(blk_rq_bytes(req));
Christoph Hellwig3b003152006-11-04 20:10:55 +01001073
Boaz Harrosh30b0c372007-12-13 13:47:40 +02001074 memset(&cmd->sdb, 0, sizeof(cmd->sdb));
Christoph Hellwig3b003152006-11-04 20:10:55 +01001075 req->buffer = NULL;
1076 }
James Bottomley7b163182005-12-15 20:17:02 -06001077
James Bottomley7b163182005-12-15 20:17:02 -06001078 cmd->cmd_len = req->cmd_len;
Tejun Heob0790412009-05-07 22:24:42 +09001079 if (!blk_rq_bytes(req))
James Bottomley7b163182005-12-15 20:17:02 -06001080 cmd->sc_data_direction = DMA_NONE;
1081 else if (rq_data_dir(req) == WRITE)
1082 cmd->sc_data_direction = DMA_TO_DEVICE;
1083 else
1084 cmd->sc_data_direction = DMA_FROM_DEVICE;
1085
Tejun Heob0790412009-05-07 22:24:42 +09001086 cmd->transfersize = blk_rq_bytes(req);
James Bottomley7b163182005-12-15 20:17:02 -06001087 cmd->allowed = req->retries;
Christoph Hellwig3b003152006-11-04 20:10:55 +01001088 return BLKPREP_OK;
1089}
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001090EXPORT_SYMBOL(scsi_setup_blk_pc_cmnd);
Christoph Hellwig3b003152006-11-04 20:10:55 +01001091
1092/*
1093 * Setup a REQ_TYPE_FS command. These are simple read/write request
1094 * from filesystems that still need to be translated to SCSI CDBs from
1095 * the ULD.
1096 */
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001097int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
Christoph Hellwig3b003152006-11-04 20:10:55 +01001098{
1099 struct scsi_cmnd *cmd;
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001100 int ret = scsi_prep_state_check(sdev, req);
Christoph Hellwig3b003152006-11-04 20:10:55 +01001101
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001102 if (ret != BLKPREP_OK)
1103 return ret;
Chandra Seetharamana6a8d9f2008-05-01 14:49:46 -07001104
1105 if (unlikely(sdev->scsi_dh_data && sdev->scsi_dh_data->scsi_dh
1106 && sdev->scsi_dh_data->scsi_dh->prep_fn)) {
1107 ret = sdev->scsi_dh_data->scsi_dh->prep_fn(sdev, req);
1108 if (ret != BLKPREP_OK)
1109 return ret;
1110 }
1111
Christoph Hellwig3b003152006-11-04 20:10:55 +01001112 /*
1113 * Filesystem requests must transfer data.
1114 */
1115 BUG_ON(!req->nr_phys_segments);
1116
1117 cmd = scsi_get_cmd_from_req(sdev, req);
1118 if (unlikely(!cmd))
1119 return BLKPREP_DEFER;
1120
Boaz Harrosh64a87b22008-04-30 11:19:47 +03001121 memset(cmd->cmnd, 0, BLK_MAX_CDB);
Boaz Harroshbb52d822007-12-13 16:14:27 -08001122 return scsi_init_io(cmd, GFP_ATOMIC);
James Bottomley7b163182005-12-15 20:17:02 -06001123}
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001124EXPORT_SYMBOL(scsi_setup_fs_cmnd);
James Bottomley7b163182005-12-15 20:17:02 -06001125
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001126int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001127{
Christoph Hellwig3b003152006-11-04 20:10:55 +01001128 int ret = BLKPREP_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001129
1130 /*
Christoph Hellwig3b003152006-11-04 20:10:55 +01001131 * If the device is not in running state we will reject some
1132 * or all commands.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001133 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001134 if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
Christoph Hellwig3b003152006-11-04 20:10:55 +01001135 switch (sdev->sdev_state) {
1136 case SDEV_OFFLINE:
1137 /*
1138 * If the device is offline we refuse to process any
1139 * commands. The device must be brought online
1140 * before trying any recovery commands.
1141 */
1142 sdev_printk(KERN_ERR, sdev,
1143 "rejecting I/O to offline device\n");
1144 ret = BLKPREP_KILL;
1145 break;
1146 case SDEV_DEL:
1147 /*
1148 * If the device is fully deleted, we refuse to
1149 * process any commands as well.
1150 */
James Bottomley9ccfc752005-10-02 11:45:08 -05001151 sdev_printk(KERN_ERR, sdev,
1152 "rejecting I/O to dead device\n");
Christoph Hellwig3b003152006-11-04 20:10:55 +01001153 ret = BLKPREP_KILL;
1154 break;
1155 case SDEV_QUIESCE:
1156 case SDEV_BLOCK:
James Bottomley6f4267e2008-08-22 16:53:31 -05001157 case SDEV_CREATED_BLOCK:
Christoph Hellwig3b003152006-11-04 20:10:55 +01001158 /*
1159 * If the devices is blocked we defer normal commands.
1160 */
1161 if (!(req->cmd_flags & REQ_PREEMPT))
1162 ret = BLKPREP_DEFER;
1163 break;
1164 default:
1165 /*
1166 * For any other not fully online state we only allow
1167 * special commands. In particular any user initiated
1168 * command is not allowed.
1169 */
1170 if (!(req->cmd_flags & REQ_PREEMPT))
1171 ret = BLKPREP_KILL;
1172 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001173 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001174 }
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001175 return ret;
1176}
1177EXPORT_SYMBOL(scsi_prep_state_check);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001178
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001179int scsi_prep_return(struct request_queue *q, struct request *req, int ret)
1180{
1181 struct scsi_device *sdev = q->queuedata;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001182
Christoph Hellwig3b003152006-11-04 20:10:55 +01001183 switch (ret) {
1184 case BLKPREP_KILL:
1185 req->errors = DID_NO_CONNECT << 16;
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001186 /* release the command and kill it */
1187 if (req->special) {
1188 struct scsi_cmnd *cmd = req->special;
1189 scsi_release_buffers(cmd);
1190 scsi_put_command(cmd);
1191 req->special = NULL;
1192 }
Christoph Hellwig3b003152006-11-04 20:10:55 +01001193 break;
1194 case BLKPREP_DEFER:
1195 /*
Tejun Heo9934c8c2009-05-08 11:54:16 +09001196 * If we defer, the blk_peek_request() returns NULL, but the
Christoph Hellwig3b003152006-11-04 20:10:55 +01001197 * queue must be restarted, so we plug here if no returning
1198 * command will automatically do that.
1199 */
1200 if (sdev->device_busy == 0)
1201 blk_plug_device(q);
1202 break;
1203 default:
1204 req->cmd_flags |= REQ_DONTPREP;
1205 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001206
Christoph Hellwig3b003152006-11-04 20:10:55 +01001207 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001208}
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001209EXPORT_SYMBOL(scsi_prep_return);
1210
James Bottomley751bf4d2008-01-02 11:14:30 -06001211int scsi_prep_fn(struct request_queue *q, struct request *req)
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001212{
1213 struct scsi_device *sdev = q->queuedata;
1214 int ret = BLKPREP_KILL;
1215
1216 if (req->cmd_type == REQ_TYPE_BLOCK_PC)
1217 ret = scsi_setup_blk_pc_cmnd(sdev, req);
1218 return scsi_prep_return(q, req, ret);
1219}
Hannes Reineckeb3912772009-06-18 09:57:18 +02001220EXPORT_SYMBOL(scsi_prep_fn);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001221
1222/*
1223 * scsi_dev_queue_ready: if we can send requests to sdev, return 1 else
1224 * return 0.
1225 *
1226 * Called with the queue_lock held.
1227 */
1228static inline int scsi_dev_queue_ready(struct request_queue *q,
1229 struct scsi_device *sdev)
1230{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001231 if (sdev->device_busy == 0 && sdev->device_blocked) {
1232 /*
1233 * unblock after device_blocked iterates to zero
1234 */
1235 if (--sdev->device_blocked == 0) {
1236 SCSI_LOG_MLQUEUE(3,
James Bottomley9ccfc752005-10-02 11:45:08 -05001237 sdev_printk(KERN_INFO, sdev,
1238 "unblocking device at zero depth\n"));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001239 } else {
1240 blk_plug_device(q);
1241 return 0;
1242 }
1243 }
Kiyoshi Ueda9d112512008-10-04 14:11:06 -04001244 if (scsi_device_is_busy(sdev))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001245 return 0;
1246
1247 return 1;
1248}
1249
Mike Christief0c0a372008-08-17 15:24:38 -05001250
1251/*
1252 * scsi_target_queue_ready: checks if there we can send commands to target
1253 * @sdev: scsi device on starget to check.
1254 *
1255 * Called with the host lock held.
1256 */
1257static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
1258 struct scsi_device *sdev)
1259{
1260 struct scsi_target *starget = scsi_target(sdev);
1261
1262 if (starget->single_lun) {
1263 if (starget->starget_sdev_user &&
1264 starget->starget_sdev_user != sdev)
1265 return 0;
1266 starget->starget_sdev_user = sdev;
1267 }
1268
1269 if (starget->target_busy == 0 && starget->target_blocked) {
1270 /*
1271 * unblock after target_blocked iterates to zero
1272 */
1273 if (--starget->target_blocked == 0) {
1274 SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
1275 "unblocking target at zero depth\n"));
Mike Christieb4efdd52009-04-09 15:57:10 -05001276 } else
Mike Christief0c0a372008-08-17 15:24:38 -05001277 return 0;
Mike Christief0c0a372008-08-17 15:24:38 -05001278 }
1279
1280 if (scsi_target_is_busy(starget)) {
1281 if (list_empty(&sdev->starved_entry)) {
1282 list_add_tail(&sdev->starved_entry,
1283 &shost->starved_list);
1284 return 0;
1285 }
1286 }
1287
1288 /* We're OK to process the command, so we can't be starved */
1289 if (!list_empty(&sdev->starved_entry))
1290 list_del_init(&sdev->starved_entry);
1291 return 1;
1292}
1293
Linus Torvalds1da177e2005-04-16 15:20:36 -07001294/*
1295 * scsi_host_queue_ready: if we can send requests to shost, return 1 else
1296 * return 0. We must end up running the queue again whenever 0 is
1297 * returned, else IO can hang.
1298 *
1299 * Called with host_lock held.
1300 */
1301static inline int scsi_host_queue_ready(struct request_queue *q,
1302 struct Scsi_Host *shost,
1303 struct scsi_device *sdev)
1304{
James Bottomley939647e2005-09-18 15:05:20 -05001305 if (scsi_host_in_recovery(shost))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001306 return 0;
1307 if (shost->host_busy == 0 && shost->host_blocked) {
1308 /*
1309 * unblock after host_blocked iterates to zero
1310 */
1311 if (--shost->host_blocked == 0) {
1312 SCSI_LOG_MLQUEUE(3,
1313 printk("scsi%d unblocking host at zero depth\n",
1314 shost->host_no));
1315 } else {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001316 return 0;
1317 }
1318 }
Kiyoshi Ueda9d112512008-10-04 14:11:06 -04001319 if (scsi_host_is_busy(shost)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001320 if (list_empty(&sdev->starved_entry))
1321 list_add_tail(&sdev->starved_entry, &shost->starved_list);
1322 return 0;
1323 }
1324
1325 /* We're OK to process the command, so we can't be starved */
1326 if (!list_empty(&sdev->starved_entry))
1327 list_del_init(&sdev->starved_entry);
1328
1329 return 1;
1330}
1331
1332/*
Kiyoshi Ueda6c5121b2008-10-04 14:11:35 -04001333 * Busy state exporting function for request stacking drivers.
1334 *
1335 * For efficiency, no lock is taken to check the busy state of
1336 * shost/starget/sdev, since the returned value is not guaranteed and
1337 * may be changed after request stacking drivers call the function,
1338 * regardless of taking lock or not.
1339 *
1340 * When scsi can't dispatch I/Os anymore and needs to kill I/Os
1341 * (e.g. !sdev), scsi needs to return 'not busy'.
1342 * Otherwise, request stacking drivers may hold requests forever.
1343 */
1344static int scsi_lld_busy(struct request_queue *q)
1345{
1346 struct scsi_device *sdev = q->queuedata;
1347 struct Scsi_Host *shost;
1348 struct scsi_target *starget;
1349
1350 if (!sdev)
1351 return 0;
1352
1353 shost = sdev->host;
1354 starget = scsi_target(sdev);
1355
1356 if (scsi_host_in_recovery(shost) || scsi_host_is_busy(shost) ||
1357 scsi_target_is_busy(starget) || scsi_device_is_busy(sdev))
1358 return 1;
1359
1360 return 0;
1361}
1362
1363/*
James Bottomleye91442b2005-09-09 10:44:16 -05001364 * Kill a request for a dead device
Linus Torvalds1da177e2005-04-16 15:20:36 -07001365 */
Jens Axboe165125e2007-07-24 09:28:11 +02001366static void scsi_kill_request(struct request *req, struct request_queue *q)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001367{
James Bottomleye91442b2005-09-09 10:44:16 -05001368 struct scsi_cmnd *cmd = req->special;
Jiri Slaby03b14702009-09-23 16:15:35 +02001369 struct scsi_device *sdev;
1370 struct scsi_target *starget;
1371 struct Scsi_Host *shost;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001372
Tejun Heo9934c8c2009-05-08 11:54:16 +09001373 blk_start_request(req);
James Bottomley788ce432005-09-09 13:40:23 -05001374
Jiri Slaby03b14702009-09-23 16:15:35 +02001375 sdev = cmd->device;
1376 starget = scsi_target(sdev);
1377 shost = sdev->host;
James Bottomleye91442b2005-09-09 10:44:16 -05001378 scsi_init_cmd_errh(cmd);
1379 cmd->result = DID_NO_CONNECT << 16;
1380 atomic_inc(&cmd->device->iorequest_cnt);
Tejun Heoe36e0c82006-04-11 17:27:53 +09001381
1382 /*
1383 * SCSI request completion path will do scsi_device_unbusy(),
1384 * bump busy counts. To bump the counters, we need to dance
1385 * with the locks as normal issue path does.
1386 */
1387 sdev->device_busy++;
1388 spin_unlock(sdev->request_queue->queue_lock);
1389 spin_lock(shost->host_lock);
1390 shost->host_busy++;
Mike Christief0c0a372008-08-17 15:24:38 -05001391 starget->target_busy++;
Tejun Heoe36e0c82006-04-11 17:27:53 +09001392 spin_unlock(shost->host_lock);
1393 spin_lock(sdev->request_queue->queue_lock);
1394
Jens Axboe242f9dc2008-09-14 05:55:09 -07001395 blk_complete_request(req);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001396}
1397
Jens Axboe1aea6432006-01-09 16:03:03 +01001398static void scsi_softirq_done(struct request *rq)
1399{
Jens Axboe242f9dc2008-09-14 05:55:09 -07001400 struct scsi_cmnd *cmd = rq->special;
1401 unsigned long wait_for = (cmd->allowed + 1) * rq->timeout;
Jens Axboe1aea6432006-01-09 16:03:03 +01001402 int disposition;
1403
1404 INIT_LIST_HEAD(&cmd->eh_entry);
1405
Jens Axboe242f9dc2008-09-14 05:55:09 -07001406 atomic_inc(&cmd->device->iodone_cnt);
1407 if (cmd->result)
1408 atomic_inc(&cmd->device->ioerr_cnt);
1409
Jens Axboe1aea6432006-01-09 16:03:03 +01001410 disposition = scsi_decide_disposition(cmd);
1411 if (disposition != SUCCESS &&
1412 time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) {
1413 sdev_printk(KERN_ERR, cmd->device,
1414 "timing out command, waited %lus\n",
1415 wait_for/HZ);
1416 disposition = SUCCESS;
1417 }
1418
1419 scsi_log_completion(cmd, disposition);
1420
1421 switch (disposition) {
1422 case SUCCESS:
1423 scsi_finish_command(cmd);
1424 break;
1425 case NEEDS_RETRY:
Christoph Hellwig596f4822007-01-02 12:56:00 +01001426 scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY);
Jens Axboe1aea6432006-01-09 16:03:03 +01001427 break;
1428 case ADD_TO_MLQUEUE:
1429 scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
1430 break;
1431 default:
1432 if (!scsi_eh_scmd_add(cmd, 0))
1433 scsi_finish_command(cmd);
1434 }
1435}
1436
Linus Torvalds1da177e2005-04-16 15:20:36 -07001437/*
1438 * Function: scsi_request_fn()
1439 *
1440 * Purpose: Main strategy routine for SCSI.
1441 *
1442 * Arguments: q - Pointer to actual queue.
1443 *
1444 * Returns: Nothing
1445 *
1446 * Lock status: IO request lock assumed to be held when called.
1447 */
1448static void scsi_request_fn(struct request_queue *q)
1449{
1450 struct scsi_device *sdev = q->queuedata;
1451 struct Scsi_Host *shost;
1452 struct scsi_cmnd *cmd;
1453 struct request *req;
1454
1455 if (!sdev) {
1456 printk("scsi: killing requests for dead queue\n");
Tejun Heo9934c8c2009-05-08 11:54:16 +09001457 while ((req = blk_peek_request(q)) != NULL)
James Bottomleye91442b2005-09-09 10:44:16 -05001458 scsi_kill_request(req, q);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001459 return;
1460 }
1461
1462 if(!get_device(&sdev->sdev_gendev))
1463 /* We must be tearing the block queue down already */
1464 return;
1465
1466 /*
1467 * To start with, we keep looping until the queue is empty, or until
1468 * the host is no longer able to accept any more requests.
1469 */
1470 shost = sdev->host;
1471 while (!blk_queue_plugged(q)) {
1472 int rtn;
1473 /*
1474 * get next queueable request. We do this early to make sure
1475 * that the request is fully prepared even if we cannot
1476 * accept it.
1477 */
Tejun Heo9934c8c2009-05-08 11:54:16 +09001478 req = blk_peek_request(q);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001479 if (!req || !scsi_dev_queue_ready(q, sdev))
1480 break;
1481
1482 if (unlikely(!scsi_device_online(sdev))) {
James Bottomley9ccfc752005-10-02 11:45:08 -05001483 sdev_printk(KERN_ERR, sdev,
1484 "rejecting I/O to offline device\n");
James Bottomleye91442b2005-09-09 10:44:16 -05001485 scsi_kill_request(req, q);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001486 continue;
1487 }
1488
1489
1490 /*
1491 * Remove the request from the request list.
1492 */
1493 if (!(blk_queue_tagged(q) && !blk_queue_start_tag(q, req)))
Tejun Heo9934c8c2009-05-08 11:54:16 +09001494 blk_start_request(req);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001495 sdev->device_busy++;
1496
1497 spin_unlock(q->queue_lock);
James Bottomleye91442b2005-09-09 10:44:16 -05001498 cmd = req->special;
1499 if (unlikely(cmd == NULL)) {
1500 printk(KERN_CRIT "impossible request in %s.\n"
1501 "please mail a stack trace to "
Jens Axboe4aff5e22006-08-10 08:44:47 +02001502 "linux-scsi@vger.kernel.org\n",
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001503 __func__);
Jens Axboe4aff5e22006-08-10 08:44:47 +02001504 blk_dump_rq_flags(req, "foo");
James Bottomleye91442b2005-09-09 10:44:16 -05001505 BUG();
1506 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001507 spin_lock(shost->host_lock);
1508
Mike Christieecefe8a2008-07-11 19:50:35 -05001509 /*
1510 * We hit this when the driver is using a host wide
1511 * tag map. For device level tag maps the queue_depth check
1512 * in the device ready fn would prevent us from trying
1513 * to allocate a tag. Since the map is a shared host resource
1514 * we add the dev to the starved list so it eventually gets
1515 * a run when a tag is freed.
1516 */
Mike Christie6bd522f2008-07-22 15:34:38 -05001517 if (blk_queue_tagged(q) && !blk_rq_tagged(req)) {
Mike Christieecefe8a2008-07-11 19:50:35 -05001518 if (list_empty(&sdev->starved_entry))
1519 list_add_tail(&sdev->starved_entry,
1520 &shost->starved_list);
1521 goto not_ready;
1522 }
1523
Mike Christief0c0a372008-08-17 15:24:38 -05001524 if (!scsi_target_queue_ready(shost, sdev))
1525 goto not_ready;
1526
Linus Torvalds1da177e2005-04-16 15:20:36 -07001527 if (!scsi_host_queue_ready(q, shost, sdev))
1528 goto not_ready;
Mike Christief0c0a372008-08-17 15:24:38 -05001529
1530 scsi_target(sdev)->target_busy++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001531 shost->host_busy++;
1532
1533 /*
1534 * XXX(hch): This is rather suboptimal, scsi_dispatch_cmd will
1535 * take the lock again.
1536 */
1537 spin_unlock_irq(shost->host_lock);
1538
Linus Torvalds1da177e2005-04-16 15:20:36 -07001539 /*
1540 * Finally, initialize any error handling parameters, and set up
1541 * the timers for timeouts.
1542 */
1543 scsi_init_cmd_errh(cmd);
1544
1545 /*
1546 * Dispatch the command to the low-level driver.
1547 */
1548 rtn = scsi_dispatch_cmd(cmd);
1549 spin_lock_irq(q->queue_lock);
1550 if(rtn) {
1551 /* we're refusing the command; because of
1552 * the way locks get dropped, we need to
1553 * check here if plugging is required */
1554 if(sdev->device_busy == 0)
1555 blk_plug_device(q);
1556
1557 break;
1558 }
1559 }
1560
1561 goto out;
1562
1563 not_ready:
1564 spin_unlock_irq(shost->host_lock);
1565
1566 /*
1567 * lock q, handle tag, requeue req, and decrement device_busy. We
1568 * must return with queue_lock held.
1569 *
1570 * Decrementing device_busy without checking it is OK, as all such
1571 * cases (host limits or settings) should run the queue at some
1572 * later time.
1573 */
1574 spin_lock_irq(q->queue_lock);
1575 blk_requeue_request(q, req);
1576 sdev->device_busy--;
1577 if(sdev->device_busy == 0)
1578 blk_plug_device(q);
1579 out:
1580 /* must be careful here...if we trigger the ->remove() function
1581 * we cannot be holding the q lock */
1582 spin_unlock_irq(q->queue_lock);
1583 put_device(&sdev->sdev_gendev);
1584 spin_lock_irq(q->queue_lock);
1585}
1586
1587u64 scsi_calculate_bounce_limit(struct Scsi_Host *shost)
1588{
1589 struct device *host_dev;
1590 u64 bounce_limit = 0xffffffff;
1591
1592 if (shost->unchecked_isa_dma)
1593 return BLK_BOUNCE_ISA;
1594 /*
1595 * Platforms with virtual-DMA translation
1596 * hardware have no practical limit.
1597 */
1598 if (!PCI_DMA_BUS_IS_PHYS)
1599 return BLK_BOUNCE_ANY;
1600
1601 host_dev = scsi_get_device(shost);
1602 if (host_dev && host_dev->dma_mask)
1603 bounce_limit = *host_dev->dma_mask;
1604
1605 return bounce_limit;
1606}
1607EXPORT_SYMBOL(scsi_calculate_bounce_limit);
1608
FUJITA Tomonorib58d9152006-11-16 19:24:10 +09001609struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost,
1610 request_fn_proc *request_fn)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001611{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001612 struct request_queue *q;
FUJITA Tomonori860ac562008-02-04 22:28:05 -08001613 struct device *dev = shost->shost_gendev.parent;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001614
FUJITA Tomonorib58d9152006-11-16 19:24:10 +09001615 q = blk_init_queue(request_fn, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001616 if (!q)
1617 return NULL;
1618
Jens Axboea8474ce2007-08-07 09:02:51 +02001619 /*
1620 * this limit is imposed by hardware restrictions
1621 */
Martin K. Petersen8a783622010-02-26 00:20:39 -05001622 blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize,
1623 SCSI_MAX_SG_CHAIN_SEGMENTS));
Jens Axboea8474ce2007-08-07 09:02:51 +02001624
Martin K. Petersen13f05c82010-09-10 20:50:10 +02001625 if (scsi_host_prot_dma(shost)) {
1626 shost->sg_prot_tablesize =
1627 min_not_zero(shost->sg_prot_tablesize,
1628 (unsigned short)SCSI_MAX_PROT_SG_SEGMENTS);
1629 BUG_ON(shost->sg_prot_tablesize < shost->sg_tablesize);
1630 blk_queue_max_integrity_segments(q, shost->sg_prot_tablesize);
1631 }
1632
Martin K. Petersen086fa5f2010-02-26 00:20:38 -05001633 blk_queue_max_hw_sectors(q, shost->max_sectors);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001634 blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost));
1635 blk_queue_segment_boundary(q, shost->dma_boundary);
FUJITA Tomonori99c84db2008-02-04 22:28:17 -08001636 dma_set_seg_boundary(dev, shost->dma_boundary);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001637
FUJITA Tomonori860ac562008-02-04 22:28:05 -08001638 blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));
1639
Linus Torvalds1da177e2005-04-16 15:20:36 -07001640 if (!shost->use_clustering)
Martin K. Petersene692cb62010-12-01 19:41:49 +01001641 q->limits.cluster = 0;
James Bottomley465ff312008-01-01 10:00:10 -06001642
1643 /*
1644 * set a reasonable default alignment on word boundaries: the
1645 * host and device may alter it using
1646 * blk_queue_update_dma_alignment() later.
1647 */
1648 blk_queue_dma_alignment(q, 0x03);
1649
Linus Torvalds1da177e2005-04-16 15:20:36 -07001650 return q;
1651}
FUJITA Tomonorib58d9152006-11-16 19:24:10 +09001652EXPORT_SYMBOL(__scsi_alloc_queue);
1653
1654struct request_queue *scsi_alloc_queue(struct scsi_device *sdev)
1655{
1656 struct request_queue *q;
1657
1658 q = __scsi_alloc_queue(sdev->host, scsi_request_fn);
1659 if (!q)
1660 return NULL;
1661
1662 blk_queue_prep_rq(q, scsi_prep_fn);
FUJITA Tomonorib58d9152006-11-16 19:24:10 +09001663 blk_queue_softirq_done(q, scsi_softirq_done);
Jens Axboe242f9dc2008-09-14 05:55:09 -07001664 blk_queue_rq_timed_out(q, scsi_times_out);
Kiyoshi Ueda6c5121b2008-10-04 14:11:35 -04001665 blk_queue_lld_busy(q, scsi_lld_busy);
FUJITA Tomonorib58d9152006-11-16 19:24:10 +09001666 return q;
1667}
Linus Torvalds1da177e2005-04-16 15:20:36 -07001668
1669void scsi_free_queue(struct request_queue *q)
1670{
1671 blk_cleanup_queue(q);
1672}
1673
1674/*
1675 * Function: scsi_block_requests()
1676 *
1677 * Purpose: Utility function used by low-level drivers to prevent further
1678 * commands from being queued to the device.
1679 *
1680 * Arguments: shost - Host in question
1681 *
1682 * Returns: Nothing
1683 *
1684 * Lock status: No locks are assumed held.
1685 *
1686 * Notes: There is no timer nor any other means by which the requests
1687 * get unblocked other than the low-level driver calling
1688 * scsi_unblock_requests().
1689 */
1690void scsi_block_requests(struct Scsi_Host *shost)
1691{
1692 shost->host_self_blocked = 1;
1693}
1694EXPORT_SYMBOL(scsi_block_requests);
1695
1696/*
1697 * Function: scsi_unblock_requests()
1698 *
1699 * Purpose: Utility function used by low-level drivers to allow further
1700 * commands from being queued to the device.
1701 *
1702 * Arguments: shost - Host in question
1703 *
1704 * Returns: Nothing
1705 *
1706 * Lock status: No locks are assumed held.
1707 *
1708 * Notes: There is no timer nor any other means by which the requests
1709 * get unblocked other than the low-level driver calling
1710 * scsi_unblock_requests().
1711 *
1712 * This is done as an API function so that changes to the
1713 * internals of the scsi mid-layer won't require wholesale
1714 * changes to drivers that use this feature.
1715 */
1716void scsi_unblock_requests(struct Scsi_Host *shost)
1717{
1718 shost->host_self_blocked = 0;
1719 scsi_run_host_queues(shost);
1720}
1721EXPORT_SYMBOL(scsi_unblock_requests);
1722
1723int __init scsi_init_queue(void)
1724{
1725 int i;
1726
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001727 scsi_sdb_cache = kmem_cache_create("scsi_data_buffer",
1728 sizeof(struct scsi_data_buffer),
1729 0, 0, NULL);
1730 if (!scsi_sdb_cache) {
1731 printk(KERN_ERR "SCSI: can't init scsi sdb cache\n");
FUJITA Tomonorif0787272008-12-14 01:23:45 +09001732 return -ENOMEM;
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +02001733 }
1734
Linus Torvalds1da177e2005-04-16 15:20:36 -07001735 for (i = 0; i < SG_MEMPOOL_NR; i++) {
1736 struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
1737 int size = sgp->size * sizeof(struct scatterlist);
1738
1739 sgp->slab = kmem_cache_create(sgp->name, size, 0,
Paul Mundt20c2df82007-07-20 10:11:58 +09001740 SLAB_HWCACHE_ALIGN, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001741 if (!sgp->slab) {
1742 printk(KERN_ERR "SCSI: can't init sg slab %s\n",
1743 sgp->name);
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001744 goto cleanup_sdb;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001745 }
1746
Matthew Dobson93d23412006-03-26 01:37:50 -08001747 sgp->pool = mempool_create_slab_pool(SG_MEMPOOL_SIZE,
1748 sgp->slab);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001749 if (!sgp->pool) {
1750 printk(KERN_ERR "SCSI: can't init sg mempool %s\n",
1751 sgp->name);
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001752 goto cleanup_sdb;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001753 }
1754 }
1755
1756 return 0;
FUJITA Tomonori3d9dd6e2008-01-25 23:25:14 +09001757
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001758cleanup_sdb:
FUJITA Tomonori3d9dd6e2008-01-25 23:25:14 +09001759 for (i = 0; i < SG_MEMPOOL_NR; i++) {
1760 struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
1761 if (sgp->pool)
1762 mempool_destroy(sgp->pool);
1763 if (sgp->slab)
1764 kmem_cache_destroy(sgp->slab);
1765 }
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001766 kmem_cache_destroy(scsi_sdb_cache);
FUJITA Tomonori3d9dd6e2008-01-25 23:25:14 +09001767
1768 return -ENOMEM;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001769}
1770
1771void scsi_exit_queue(void)
1772{
1773 int i;
1774
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001775 kmem_cache_destroy(scsi_sdb_cache);
Mike Christieaa7b5cd2005-11-11 05:31:41 -06001776
Linus Torvalds1da177e2005-04-16 15:20:36 -07001777 for (i = 0; i < SG_MEMPOOL_NR; i++) {
1778 struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
1779 mempool_destroy(sgp->pool);
1780 kmem_cache_destroy(sgp->slab);
1781 }
1782}
James Bottomley5baba832006-03-18 14:10:35 -06001783
1784/**
1785 * scsi_mode_select - issue a mode select
1786 * @sdev: SCSI device to be queried
1787 * @pf: Page format bit (1 == standard, 0 == vendor specific)
1788 * @sp: Save page bit (0 == don't save, 1 == save)
1789 * @modepage: mode page being requested
1790 * @buffer: request buffer (may not be smaller than eight bytes)
1791 * @len: length of request buffer.
1792 * @timeout: command timeout
1793 * @retries: number of retries before failing
1794 * @data: returns a structure abstracting the mode header data
Rob Landleyeb448202007-11-03 13:30:39 -05001795 * @sshdr: place to put sense data (or NULL if no sense to be collected).
James Bottomley5baba832006-03-18 14:10:35 -06001796 * must be SCSI_SENSE_BUFFERSIZE big.
1797 *
1798 * Returns zero if successful; negative error number or scsi
1799 * status on error
1800 *
1801 */
1802int
1803scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage,
1804 unsigned char *buffer, int len, int timeout, int retries,
1805 struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
1806{
1807 unsigned char cmd[10];
1808 unsigned char *real_buffer;
1809 int ret;
1810
1811 memset(cmd, 0, sizeof(cmd));
1812 cmd[1] = (pf ? 0x10 : 0) | (sp ? 0x01 : 0);
1813
1814 if (sdev->use_10_for_ms) {
1815 if (len > 65535)
1816 return -EINVAL;
1817 real_buffer = kmalloc(8 + len, GFP_KERNEL);
1818 if (!real_buffer)
1819 return -ENOMEM;
1820 memcpy(real_buffer + 8, buffer, len);
1821 len += 8;
1822 real_buffer[0] = 0;
1823 real_buffer[1] = 0;
1824 real_buffer[2] = data->medium_type;
1825 real_buffer[3] = data->device_specific;
1826 real_buffer[4] = data->longlba ? 0x01 : 0;
1827 real_buffer[5] = 0;
1828 real_buffer[6] = data->block_descriptor_length >> 8;
1829 real_buffer[7] = data->block_descriptor_length;
1830
1831 cmd[0] = MODE_SELECT_10;
1832 cmd[7] = len >> 8;
1833 cmd[8] = len;
1834 } else {
1835 if (len > 255 || data->block_descriptor_length > 255 ||
1836 data->longlba)
1837 return -EINVAL;
1838
1839 real_buffer = kmalloc(4 + len, GFP_KERNEL);
1840 if (!real_buffer)
1841 return -ENOMEM;
1842 memcpy(real_buffer + 4, buffer, len);
1843 len += 4;
1844 real_buffer[0] = 0;
1845 real_buffer[1] = data->medium_type;
1846 real_buffer[2] = data->device_specific;
1847 real_buffer[3] = data->block_descriptor_length;
1848
1849
1850 cmd[0] = MODE_SELECT;
1851 cmd[4] = len;
1852 }
1853
1854 ret = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, real_buffer, len,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +09001855 sshdr, timeout, retries, NULL);
James Bottomley5baba832006-03-18 14:10:35 -06001856 kfree(real_buffer);
1857 return ret;
1858}
1859EXPORT_SYMBOL_GPL(scsi_mode_select);
1860
Linus Torvalds1da177e2005-04-16 15:20:36 -07001861/**
Rob Landleyeb448202007-11-03 13:30:39 -05001862 * scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary.
James Bottomley1cf72692005-08-28 11:27:01 -05001863 * @sdev: SCSI device to be queried
Linus Torvalds1da177e2005-04-16 15:20:36 -07001864 * @dbd: set if mode sense will allow block descriptors to be returned
1865 * @modepage: mode page being requested
1866 * @buffer: request buffer (may not be smaller than eight bytes)
1867 * @len: length of request buffer.
1868 * @timeout: command timeout
1869 * @retries: number of retries before failing
1870 * @data: returns a structure abstracting the mode header data
Rob Landleyeb448202007-11-03 13:30:39 -05001871 * @sshdr: place to put sense data (or NULL if no sense to be collected).
James Bottomley1cf72692005-08-28 11:27:01 -05001872 * must be SCSI_SENSE_BUFFERSIZE big.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001873 *
1874 * Returns zero if unsuccessful, or the header offset (either 4
1875 * or 8 depending on whether a six or ten byte command was
1876 * issued) if successful.
Rob Landleyeb448202007-11-03 13:30:39 -05001877 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001878int
James Bottomley1cf72692005-08-28 11:27:01 -05001879scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001880 unsigned char *buffer, int len, int timeout, int retries,
James Bottomley5baba832006-03-18 14:10:35 -06001881 struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
1882{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001883 unsigned char cmd[12];
1884 int use_10_for_ms;
1885 int header_length;
James Bottomley1cf72692005-08-28 11:27:01 -05001886 int result;
James Bottomleyea73a9f2005-08-28 11:33:52 -05001887 struct scsi_sense_hdr my_sshdr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001888
1889 memset(data, 0, sizeof(*data));
1890 memset(&cmd[0], 0, 12);
1891 cmd[1] = dbd & 0x18; /* allows DBD and LLBA bits */
1892 cmd[2] = modepage;
1893
James Bottomleyea73a9f2005-08-28 11:33:52 -05001894 /* caller might not be interested in sense, but we need it */
1895 if (!sshdr)
1896 sshdr = &my_sshdr;
1897
Linus Torvalds1da177e2005-04-16 15:20:36 -07001898 retry:
James Bottomley1cf72692005-08-28 11:27:01 -05001899 use_10_for_ms = sdev->use_10_for_ms;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001900
1901 if (use_10_for_ms) {
1902 if (len < 8)
1903 len = 8;
1904
1905 cmd[0] = MODE_SENSE_10;
1906 cmd[8] = len;
1907 header_length = 8;
1908 } else {
1909 if (len < 4)
1910 len = 4;
1911
1912 cmd[0] = MODE_SENSE;
1913 cmd[4] = len;
1914 header_length = 4;
1915 }
1916
Linus Torvalds1da177e2005-04-16 15:20:36 -07001917 memset(buffer, 0, len);
1918
James Bottomley1cf72692005-08-28 11:27:01 -05001919 result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +09001920 sshdr, timeout, retries, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001921
1922 /* This code looks awful: what it's doing is making sure an
1923 * ILLEGAL REQUEST sense return identifies the actual command
1924 * byte as the problem. MODE_SENSE commands can return
1925 * ILLEGAL REQUEST if the code page isn't supported */
1926
James Bottomley1cf72692005-08-28 11:27:01 -05001927 if (use_10_for_ms && !scsi_status_is_good(result) &&
1928 (driver_byte(result) & DRIVER_SENSE)) {
James Bottomleyea73a9f2005-08-28 11:33:52 -05001929 if (scsi_sense_valid(sshdr)) {
1930 if ((sshdr->sense_key == ILLEGAL_REQUEST) &&
1931 (sshdr->asc == 0x20) && (sshdr->ascq == 0)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001932 /*
1933 * Invalid command operation code
1934 */
James Bottomley1cf72692005-08-28 11:27:01 -05001935 sdev->use_10_for_ms = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001936 goto retry;
1937 }
1938 }
1939 }
1940
James Bottomley1cf72692005-08-28 11:27:01 -05001941 if(scsi_status_is_good(result)) {
Al Viro6d73c852006-02-23 02:03:16 +01001942 if (unlikely(buffer[0] == 0x86 && buffer[1] == 0x0b &&
1943 (modepage == 6 || modepage == 8))) {
1944 /* Initio breakage? */
1945 header_length = 0;
1946 data->length = 13;
1947 data->medium_type = 0;
1948 data->device_specific = 0;
1949 data->longlba = 0;
1950 data->block_descriptor_length = 0;
1951 } else if(use_10_for_ms) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001952 data->length = buffer[0]*256 + buffer[1] + 2;
1953 data->medium_type = buffer[2];
1954 data->device_specific = buffer[3];
1955 data->longlba = buffer[4] & 0x01;
1956 data->block_descriptor_length = buffer[6]*256
1957 + buffer[7];
1958 } else {
1959 data->length = buffer[0] + 1;
1960 data->medium_type = buffer[1];
1961 data->device_specific = buffer[2];
1962 data->block_descriptor_length = buffer[3];
1963 }
Al Viro6d73c852006-02-23 02:03:16 +01001964 data->header_length = header_length;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001965 }
1966
James Bottomley1cf72692005-08-28 11:27:01 -05001967 return result;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001968}
1969EXPORT_SYMBOL(scsi_mode_sense);
1970
James Bottomley001aac22007-12-02 19:10:40 +02001971/**
1972 * scsi_test_unit_ready - test if unit is ready
1973 * @sdev: scsi device to change the state of.
1974 * @timeout: command timeout
1975 * @retries: number of retries before failing
1976 * @sshdr_external: Optional pointer to struct scsi_sense_hdr for
1977 * returning sense. Make sure that this is cleared before passing
1978 * in.
1979 *
1980 * Returns zero if unsuccessful or an error if TUR failed. For
1981 * removable media, a return of NOT_READY or UNIT_ATTENTION is
1982 * translated to success, with the ->changed flag updated.
1983 **/
Linus Torvalds1da177e2005-04-16 15:20:36 -07001984int
James Bottomley001aac22007-12-02 19:10:40 +02001985scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries,
1986 struct scsi_sense_hdr *sshdr_external)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001987{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001988 char cmd[] = {
1989 TEST_UNIT_READY, 0, 0, 0, 0, 0,
1990 };
James Bottomley001aac22007-12-02 19:10:40 +02001991 struct scsi_sense_hdr *sshdr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001992 int result;
James Bottomley001aac22007-12-02 19:10:40 +02001993
1994 if (!sshdr_external)
1995 sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
1996 else
1997 sshdr = sshdr_external;
1998
1999 /* try to eat the UNIT_ATTENTION if there are enough retries */
2000 do {
2001 result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +09002002 timeout, retries, NULL);
James Bottomley32c356d2008-08-20 00:58:13 +02002003 if (sdev->removable && scsi_sense_valid(sshdr) &&
2004 sshdr->sense_key == UNIT_ATTENTION)
2005 sdev->changed = 1;
2006 } while (scsi_sense_valid(sshdr) &&
2007 sshdr->sense_key == UNIT_ATTENTION && --retries);
James Bottomley001aac22007-12-02 19:10:40 +02002008
2009 if (!sshdr)
2010 /* could not allocate sense buffer, so can't process it */
2011 return result;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002012
James Bottomley32c356d2008-08-20 00:58:13 +02002013 if (sdev->removable && scsi_sense_valid(sshdr) &&
2014 (sshdr->sense_key == UNIT_ATTENTION ||
2015 sshdr->sense_key == NOT_READY)) {
2016 sdev->changed = 1;
2017 result = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002018 }
James Bottomley001aac22007-12-02 19:10:40 +02002019 if (!sshdr_external)
2020 kfree(sshdr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002021 return result;
2022}
2023EXPORT_SYMBOL(scsi_test_unit_ready);
2024
2025/**
Rob Landleyeb448202007-11-03 13:30:39 -05002026 * scsi_device_set_state - Take the given device through the device state model.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002027 * @sdev: scsi device to change the state of.
2028 * @state: state to change to.
2029 *
2030 * Returns zero if unsuccessful or an error if the requested
2031 * transition is illegal.
Rob Landleyeb448202007-11-03 13:30:39 -05002032 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002033int
2034scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
2035{
2036 enum scsi_device_state oldstate = sdev->sdev_state;
2037
2038 if (state == oldstate)
2039 return 0;
2040
2041 switch (state) {
2042 case SDEV_CREATED:
James Bottomley6f4267e2008-08-22 16:53:31 -05002043 switch (oldstate) {
2044 case SDEV_CREATED_BLOCK:
2045 break;
2046 default:
2047 goto illegal;
2048 }
2049 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002050
2051 case SDEV_RUNNING:
2052 switch (oldstate) {
2053 case SDEV_CREATED:
2054 case SDEV_OFFLINE:
2055 case SDEV_QUIESCE:
2056 case SDEV_BLOCK:
2057 break;
2058 default:
2059 goto illegal;
2060 }
2061 break;
2062
2063 case SDEV_QUIESCE:
2064 switch (oldstate) {
2065 case SDEV_RUNNING:
2066 case SDEV_OFFLINE:
2067 break;
2068 default:
2069 goto illegal;
2070 }
2071 break;
2072
2073 case SDEV_OFFLINE:
2074 switch (oldstate) {
2075 case SDEV_CREATED:
2076 case SDEV_RUNNING:
2077 case SDEV_QUIESCE:
2078 case SDEV_BLOCK:
2079 break;
2080 default:
2081 goto illegal;
2082 }
2083 break;
2084
2085 case SDEV_BLOCK:
2086 switch (oldstate) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002087 case SDEV_RUNNING:
James Bottomley6f4267e2008-08-22 16:53:31 -05002088 case SDEV_CREATED_BLOCK:
2089 break;
2090 default:
2091 goto illegal;
2092 }
2093 break;
2094
2095 case SDEV_CREATED_BLOCK:
2096 switch (oldstate) {
2097 case SDEV_CREATED:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002098 break;
2099 default:
2100 goto illegal;
2101 }
2102 break;
2103
2104 case SDEV_CANCEL:
2105 switch (oldstate) {
2106 case SDEV_CREATED:
2107 case SDEV_RUNNING:
Alan Stern9ea72902006-06-23 14:25:34 -04002108 case SDEV_QUIESCE:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002109 case SDEV_OFFLINE:
2110 case SDEV_BLOCK:
2111 break;
2112 default:
2113 goto illegal;
2114 }
2115 break;
2116
2117 case SDEV_DEL:
2118 switch (oldstate) {
Brian King309bd272006-06-27 11:10:43 -05002119 case SDEV_CREATED:
2120 case SDEV_RUNNING:
2121 case SDEV_OFFLINE:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002122 case SDEV_CANCEL:
2123 break;
2124 default:
2125 goto illegal;
2126 }
2127 break;
2128
2129 }
2130 sdev->sdev_state = state;
2131 return 0;
2132
2133 illegal:
2134 SCSI_LOG_ERROR_RECOVERY(1,
James Bottomley9ccfc752005-10-02 11:45:08 -05002135 sdev_printk(KERN_ERR, sdev,
2136 "Illegal state transition %s->%s\n",
2137 scsi_device_state_name(oldstate),
2138 scsi_device_state_name(state))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002139 );
2140 return -EINVAL;
2141}
2142EXPORT_SYMBOL(scsi_device_set_state);
2143
2144/**
Jeff Garzika341cd02007-10-29 17:15:22 -04002145 * sdev_evt_emit - emit a single SCSI device uevent
2146 * @sdev: associated SCSI device
2147 * @evt: event to emit
2148 *
2149 * Send a single uevent (scsi_event) to the associated scsi_device.
2150 */
2151static void scsi_evt_emit(struct scsi_device *sdev, struct scsi_event *evt)
2152{
2153 int idx = 0;
2154 char *envp[3];
2155
2156 switch (evt->evt_type) {
2157 case SDEV_EVT_MEDIA_CHANGE:
2158 envp[idx++] = "SDEV_MEDIA_CHANGE=1";
2159 break;
2160
2161 default:
2162 /* do nothing */
2163 break;
2164 }
2165
2166 envp[idx++] = NULL;
2167
2168 kobject_uevent_env(&sdev->sdev_gendev.kobj, KOBJ_CHANGE, envp);
2169}
2170
2171/**
2172 * sdev_evt_thread - send a uevent for each scsi event
2173 * @work: work struct for scsi_device
2174 *
2175 * Dispatch queued events to their associated scsi_device kobjects
2176 * as uevents.
2177 */
2178void scsi_evt_thread(struct work_struct *work)
2179{
2180 struct scsi_device *sdev;
2181 LIST_HEAD(event_list);
2182
2183 sdev = container_of(work, struct scsi_device, event_work);
2184
2185 while (1) {
2186 struct scsi_event *evt;
2187 struct list_head *this, *tmp;
2188 unsigned long flags;
2189
2190 spin_lock_irqsave(&sdev->list_lock, flags);
2191 list_splice_init(&sdev->event_list, &event_list);
2192 spin_unlock_irqrestore(&sdev->list_lock, flags);
2193
2194 if (list_empty(&event_list))
2195 break;
2196
2197 list_for_each_safe(this, tmp, &event_list) {
2198 evt = list_entry(this, struct scsi_event, node);
2199 list_del(&evt->node);
2200 scsi_evt_emit(sdev, evt);
2201 kfree(evt);
2202 }
2203 }
2204}
2205
2206/**
2207 * sdev_evt_send - send asserted event to uevent thread
2208 * @sdev: scsi_device event occurred on
2209 * @evt: event to send
2210 *
2211 * Assert scsi device event asynchronously.
2212 */
2213void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt)
2214{
2215 unsigned long flags;
2216
Kay Sievers4d1566e2008-03-19 13:04:47 +01002217#if 0
2218 /* FIXME: currently this check eliminates all media change events
2219 * for polled devices. Need to update to discriminate between AN
2220 * and polled events */
Jeff Garzika341cd02007-10-29 17:15:22 -04002221 if (!test_bit(evt->evt_type, sdev->supported_events)) {
2222 kfree(evt);
2223 return;
2224 }
Kay Sievers4d1566e2008-03-19 13:04:47 +01002225#endif
Jeff Garzika341cd02007-10-29 17:15:22 -04002226
2227 spin_lock_irqsave(&sdev->list_lock, flags);
2228 list_add_tail(&evt->node, &sdev->event_list);
2229 schedule_work(&sdev->event_work);
2230 spin_unlock_irqrestore(&sdev->list_lock, flags);
2231}
2232EXPORT_SYMBOL_GPL(sdev_evt_send);
2233
2234/**
2235 * sdev_evt_alloc - allocate a new scsi event
2236 * @evt_type: type of event to allocate
2237 * @gfpflags: GFP flags for allocation
2238 *
2239 * Allocates and returns a new scsi_event.
2240 */
2241struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
2242 gfp_t gfpflags)
2243{
2244 struct scsi_event *evt = kzalloc(sizeof(struct scsi_event), gfpflags);
2245 if (!evt)
2246 return NULL;
2247
2248 evt->evt_type = evt_type;
2249 INIT_LIST_HEAD(&evt->node);
2250
2251 /* evt_type-specific initialization, if any */
2252 switch (evt_type) {
2253 case SDEV_EVT_MEDIA_CHANGE:
2254 default:
2255 /* do nothing */
2256 break;
2257 }
2258
2259 return evt;
2260}
2261EXPORT_SYMBOL_GPL(sdev_evt_alloc);
2262
2263/**
2264 * sdev_evt_send_simple - send asserted event to uevent thread
2265 * @sdev: scsi_device event occurred on
2266 * @evt_type: type of event to send
2267 * @gfpflags: GFP flags for allocation
2268 *
2269 * Assert scsi device event asynchronously, given an event type.
2270 */
2271void sdev_evt_send_simple(struct scsi_device *sdev,
2272 enum scsi_device_event evt_type, gfp_t gfpflags)
2273{
2274 struct scsi_event *evt = sdev_evt_alloc(evt_type, gfpflags);
2275 if (!evt) {
2276 sdev_printk(KERN_ERR, sdev, "event %d eaten due to OOM\n",
2277 evt_type);
2278 return;
2279 }
2280
2281 sdev_evt_send(sdev, evt);
2282}
2283EXPORT_SYMBOL_GPL(sdev_evt_send_simple);
2284
2285/**
Linus Torvalds1da177e2005-04-16 15:20:36 -07002286 * scsi_device_quiesce - Block user issued commands.
2287 * @sdev: scsi device to quiesce.
2288 *
2289 * This works by trying to transition to the SDEV_QUIESCE state
2290 * (which must be a legal transition). When the device is in this
2291 * state, only special requests will be accepted, all others will
2292 * be deferred. Since special requests may also be requeued requests,
2293 * a successful return doesn't guarantee the device will be
2294 * totally quiescent.
2295 *
2296 * Must be called with user context, may sleep.
2297 *
2298 * Returns zero if unsuccessful or an error if not.
Rob Landleyeb448202007-11-03 13:30:39 -05002299 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002300int
2301scsi_device_quiesce(struct scsi_device *sdev)
2302{
2303 int err = scsi_device_set_state(sdev, SDEV_QUIESCE);
2304 if (err)
2305 return err;
2306
2307 scsi_run_queue(sdev->request_queue);
2308 while (sdev->device_busy) {
2309 msleep_interruptible(200);
2310 scsi_run_queue(sdev->request_queue);
2311 }
2312 return 0;
2313}
2314EXPORT_SYMBOL(scsi_device_quiesce);
2315
2316/**
2317 * scsi_device_resume - Restart user issued commands to a quiesced device.
2318 * @sdev: scsi device to resume.
2319 *
2320 * Moves the device from quiesced back to running and restarts the
2321 * queues.
2322 *
2323 * Must be called with user context, may sleep.
Rob Landleyeb448202007-11-03 13:30:39 -05002324 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002325void
2326scsi_device_resume(struct scsi_device *sdev)
2327{
2328 if(scsi_device_set_state(sdev, SDEV_RUNNING))
2329 return;
2330 scsi_run_queue(sdev->request_queue);
2331}
2332EXPORT_SYMBOL(scsi_device_resume);
2333
2334static void
2335device_quiesce_fn(struct scsi_device *sdev, void *data)
2336{
2337 scsi_device_quiesce(sdev);
2338}
2339
2340void
2341scsi_target_quiesce(struct scsi_target *starget)
2342{
2343 starget_for_each_device(starget, NULL, device_quiesce_fn);
2344}
2345EXPORT_SYMBOL(scsi_target_quiesce);
2346
2347static void
2348device_resume_fn(struct scsi_device *sdev, void *data)
2349{
2350 scsi_device_resume(sdev);
2351}
2352
2353void
2354scsi_target_resume(struct scsi_target *starget)
2355{
2356 starget_for_each_device(starget, NULL, device_resume_fn);
2357}
2358EXPORT_SYMBOL(scsi_target_resume);
2359
2360/**
Rob Landleyeb448202007-11-03 13:30:39 -05002361 * scsi_internal_device_block - internal function to put a device temporarily into the SDEV_BLOCK state
Linus Torvalds1da177e2005-04-16 15:20:36 -07002362 * @sdev: device to block
2363 *
2364 * Block request made by scsi lld's to temporarily stop all
2365 * scsi commands on the specified device. Called from interrupt
2366 * or normal process context.
2367 *
2368 * Returns zero if successful or error if not
2369 *
2370 * Notes:
2371 * This routine transitions the device to the SDEV_BLOCK state
2372 * (which must be a legal transition). When the device is in this
2373 * state, all commands are deferred until the scsi lld reenables
2374 * the device with scsi_device_unblock or device_block_tmo fires.
2375 * This routine assumes the host_lock is held on entry.
Rob Landleyeb448202007-11-03 13:30:39 -05002376 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002377int
2378scsi_internal_device_block(struct scsi_device *sdev)
2379{
Jens Axboe165125e2007-07-24 09:28:11 +02002380 struct request_queue *q = sdev->request_queue;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002381 unsigned long flags;
2382 int err = 0;
2383
2384 err = scsi_device_set_state(sdev, SDEV_BLOCK);
James Bottomley6f4267e2008-08-22 16:53:31 -05002385 if (err) {
2386 err = scsi_device_set_state(sdev, SDEV_CREATED_BLOCK);
2387
2388 if (err)
2389 return err;
2390 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002391
2392 /*
2393 * The device has transitioned to SDEV_BLOCK. Stop the
2394 * block layer from calling the midlayer with this device's
2395 * request queue.
2396 */
2397 spin_lock_irqsave(q->queue_lock, flags);
2398 blk_stop_queue(q);
2399 spin_unlock_irqrestore(q->queue_lock, flags);
2400
2401 return 0;
2402}
2403EXPORT_SYMBOL_GPL(scsi_internal_device_block);
2404
2405/**
2406 * scsi_internal_device_unblock - resume a device after a block request
2407 * @sdev: device to resume
2408 *
2409 * Called by scsi lld's or the midlayer to restart the device queue
2410 * for the previously suspended scsi device. Called from interrupt or
2411 * normal process context.
2412 *
2413 * Returns zero if successful or error if not.
2414 *
2415 * Notes:
2416 * This routine transitions the device to the SDEV_RUNNING state
2417 * (which must be a legal transition) allowing the midlayer to
2418 * goose the queue for this device. This routine assumes the
2419 * host_lock is held upon entry.
Rob Landleyeb448202007-11-03 13:30:39 -05002420 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002421int
2422scsi_internal_device_unblock(struct scsi_device *sdev)
2423{
Jens Axboe165125e2007-07-24 09:28:11 +02002424 struct request_queue *q = sdev->request_queue;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002425 unsigned long flags;
2426
2427 /*
2428 * Try to transition the scsi device to SDEV_RUNNING
2429 * and goose the device queue if successful.
2430 */
Takahiro Yasui5c10e632009-04-29 12:13:02 -04002431 if (sdev->sdev_state == SDEV_BLOCK)
2432 sdev->sdev_state = SDEV_RUNNING;
2433 else if (sdev->sdev_state == SDEV_CREATED_BLOCK)
2434 sdev->sdev_state = SDEV_CREATED;
Mike Christie986fe6c2010-10-06 03:10:59 -05002435 else if (sdev->sdev_state != SDEV_CANCEL &&
2436 sdev->sdev_state != SDEV_OFFLINE)
Takahiro Yasui5c10e632009-04-29 12:13:02 -04002437 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002438
2439 spin_lock_irqsave(q->queue_lock, flags);
2440 blk_start_queue(q);
2441 spin_unlock_irqrestore(q->queue_lock, flags);
2442
2443 return 0;
2444}
2445EXPORT_SYMBOL_GPL(scsi_internal_device_unblock);
2446
2447static void
2448device_block(struct scsi_device *sdev, void *data)
2449{
2450 scsi_internal_device_block(sdev);
2451}
2452
2453static int
2454target_block(struct device *dev, void *data)
2455{
2456 if (scsi_is_target_device(dev))
2457 starget_for_each_device(to_scsi_target(dev), NULL,
2458 device_block);
2459 return 0;
2460}
2461
2462void
2463scsi_target_block(struct device *dev)
2464{
2465 if (scsi_is_target_device(dev))
2466 starget_for_each_device(to_scsi_target(dev), NULL,
2467 device_block);
2468 else
2469 device_for_each_child(dev, NULL, target_block);
2470}
2471EXPORT_SYMBOL_GPL(scsi_target_block);
2472
2473static void
2474device_unblock(struct scsi_device *sdev, void *data)
2475{
2476 scsi_internal_device_unblock(sdev);
2477}
2478
2479static int
2480target_unblock(struct device *dev, void *data)
2481{
2482 if (scsi_is_target_device(dev))
2483 starget_for_each_device(to_scsi_target(dev), NULL,
2484 device_unblock);
2485 return 0;
2486}
2487
2488void
2489scsi_target_unblock(struct device *dev)
2490{
2491 if (scsi_is_target_device(dev))
2492 starget_for_each_device(to_scsi_target(dev), NULL,
2493 device_unblock);
2494 else
2495 device_for_each_child(dev, NULL, target_unblock);
2496}
2497EXPORT_SYMBOL_GPL(scsi_target_unblock);
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002498
2499/**
2500 * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt
Rob Landleyeb448202007-11-03 13:30:39 -05002501 * @sgl: scatter-gather list
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002502 * @sg_count: number of segments in sg
2503 * @offset: offset in bytes into sg, on return offset into the mapped area
2504 * @len: bytes to map, on return number of bytes mapped
2505 *
2506 * Returns virtual address of the start of the mapped page
2507 */
Jens Axboec6132da2007-10-16 11:08:49 +02002508void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count,
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002509 size_t *offset, size_t *len)
2510{
2511 int i;
2512 size_t sg_len = 0, len_complete = 0;
Jens Axboec6132da2007-10-16 11:08:49 +02002513 struct scatterlist *sg;
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002514 struct page *page;
2515
Andrew Morton22cfefb2007-02-05 16:39:03 -08002516 WARN_ON(!irqs_disabled());
2517
Jens Axboec6132da2007-10-16 11:08:49 +02002518 for_each_sg(sgl, sg, sg_count, i) {
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002519 len_complete = sg_len; /* Complete sg-entries */
Jens Axboec6132da2007-10-16 11:08:49 +02002520 sg_len += sg->length;
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002521 if (sg_len > *offset)
2522 break;
2523 }
2524
2525 if (unlikely(i == sg_count)) {
Andrew Morton169e1a22006-04-18 21:09:08 -07002526 printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, "
2527 "elements %d\n",
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07002528 __func__, sg_len, *offset, sg_count);
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002529 WARN_ON(1);
2530 return NULL;
2531 }
2532
2533 /* Offset starting from the beginning of first page in this sg-entry */
Jens Axboec6132da2007-10-16 11:08:49 +02002534 *offset = *offset - len_complete + sg->offset;
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002535
2536 /* Assumption: contiguous pages can be accessed as "page + i" */
Jens Axboe45711f12007-10-22 21:19:53 +02002537 page = nth_page(sg_page(sg), (*offset >> PAGE_SHIFT));
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002538 *offset &= ~PAGE_MASK;
2539
2540 /* Bytes in this sg-entry from *offset to the end of the page */
2541 sg_len = PAGE_SIZE - *offset;
2542 if (*len > sg_len)
2543 *len = sg_len;
2544
2545 return kmap_atomic(page, KM_BIO_SRC_IRQ);
2546}
2547EXPORT_SYMBOL(scsi_kmap_atomic_sg);
2548
2549/**
Rob Landleyeb448202007-11-03 13:30:39 -05002550 * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002551 * @virt: virtual address to be unmapped
2552 */
2553void scsi_kunmap_atomic_sg(void *virt)
2554{
2555 kunmap_atomic(virt, KM_BIO_SRC_IRQ);
2556}
2557EXPORT_SYMBOL(scsi_kunmap_atomic_sg);