blob: cb1fa1d1f184dbc2c2880c93003c71ea87764f1e [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* $Id: timer.h,v 1.21 1999/04/20 13:22:51 anton Exp $
2 * timer.h: Definitions for the timer chips on the Sparc.
3 *
4 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
5 */
6
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
8#ifndef _SPARC_TIMER_H
9#define _SPARC_TIMER_H
10
11#include <asm/system.h> /* For SUN4M_NCPUS */
12#include <asm/sun4paddr.h>
13#include <asm/btfixup.h>
14
15/* Timer structures. The interrupt timer has two properties which
16 * are the counter (which is handled in do_timer in sched.c) and the limit.
17 * This limit is where the timer's counter 'wraps' around. Oddly enough,
18 * the sun4c timer when it hits the limit wraps back to 1 and not zero
19 * thus when calculating the value at which it will fire a microsecond you
20 * must adjust by one. Thanks SUN for designing such great hardware ;(
21 */
22
23/* Note that I am only going to use the timer that interrupts at
24 * Sparc IRQ 10. There is another one available that can fire at
25 * IRQ 14. Currently it is left untouched, we keep the PROM's limit
26 * register value and let the prom take these interrupts. This allows
27 * L1-A to work.
28 */
29
30struct sun4c_timer_info {
31 __volatile__ unsigned int cur_count10;
32 __volatile__ unsigned int timer_limit10;
33 __volatile__ unsigned int cur_count14;
34 __volatile__ unsigned int timer_limit14;
35};
36
37#define SUN4C_TIMER_PHYSADDR 0xf3000000
38#ifdef CONFIG_SUN4
39#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
40#else
41#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
42#endif
43
44/* A sun4m has two blocks of registers which are probably of the same
45 * structure. LSI Logic's L64851 is told to _decrement_ from the limit
46 * value. Aurora behaves similarly but its limit value is compacted in
47 * other fashion (it's wider). Documented fields are defined here.
48 */
49
50/* As with the interrupt register, we have two classes of timer registers
51 * which are per-cpu and master. Per-cpu timers only hit that cpu and are
52 * only level 14 ticks, master timer hits all cpus and is level 10.
53 */
54
55#define SUN4M_PRM_CNT_L 0x80000000
56#define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00
57
58struct sun4m_timer_percpu_info {
59 __volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */
60 __volatile__ unsigned int l14_cur_count;
61
62 /* This register appears to be write only and/or inaccessible
63 * on Uni-Processor sun4m machines.
64 */
65 __volatile__ unsigned int l14_limit_noclear; /* Data access error is here */
66
67 __volatile__ unsigned int cntrl; /* =1 after POST on Aurora */
68 __volatile__ unsigned char space[PAGE_SIZE - 16];
69};
70
71struct sun4m_timer_regs {
72 struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
73 volatile unsigned int l10_timer_limit;
74 volatile unsigned int l10_cur_count;
75
76 /* Again, this appears to be write only and/or inaccessible
77 * on uni-processor sun4m machines.
78 */
79 volatile unsigned int l10_limit_noclear;
80
81 /* This register too, it must be magic. */
82 volatile unsigned int foobar;
83
84 volatile unsigned int cfg; /* equals zero at boot time... */
85};
86
87extern struct sun4m_timer_regs *sun4m_timers;
88
89#define SUN4D_PRM_CNT_L 0x80000000
90#define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00
91
92struct sun4d_timer_regs {
93 volatile unsigned int l10_timer_limit;
94 volatile unsigned int l10_cur_countx;
95 volatile unsigned int l10_limit_noclear;
96 volatile unsigned int ctrl;
97 volatile unsigned int l10_cur_count;
98};
99
100extern struct sun4d_timer_regs *sun4d_timers;
101
102extern __volatile__ unsigned int *master_l10_counter;
103extern __volatile__ unsigned int *master_l10_limit;
104
105/* FIXME: Make do_[gs]ettimeofday btfixup calls */
106BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
107#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
108
109#endif /* !(_SPARC_TIMER_H) */