Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1 | /* |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 2 | abituguru3.c |
| 3 | |
| 4 | Copyright (c) 2006-2008 Hans de Goede <j.w.r.degoede@hhs.nl> |
| 5 | Copyright (c) 2008 Alistair John Strachan <alistair@devzero.co.uk> |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 20 | */ |
| 21 | /* |
| 22 | This driver supports the sensor part of revision 3 of the custom Abit uGuru |
| 23 | chip found on newer Abit uGuru motherboards. Note: because of lack of specs |
| 24 | only reading the sensors and their settings is supported. |
| 25 | */ |
| 26 | #include <linux/module.h> |
| 27 | #include <linux/init.h> |
| 28 | #include <linux/slab.h> |
| 29 | #include <linux/jiffies.h> |
| 30 | #include <linux/mutex.h> |
| 31 | #include <linux/err.h> |
| 32 | #include <linux/delay.h> |
| 33 | #include <linux/platform_device.h> |
| 34 | #include <linux/hwmon.h> |
| 35 | #include <linux/hwmon-sysfs.h> |
Hans de Goede | b3aeab0 | 2008-05-23 16:10:41 +0200 | [diff] [blame] | 36 | #include <linux/dmi.h> |
H Hartley Sweeten | 6055fae | 2009-09-15 17:18:13 +0200 | [diff] [blame^] | 37 | #include <linux/io.h> |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 38 | |
| 39 | /* uGuru3 bank addresses */ |
| 40 | #define ABIT_UGURU3_SETTINGS_BANK 0x01 |
| 41 | #define ABIT_UGURU3_SENSORS_BANK 0x08 |
| 42 | #define ABIT_UGURU3_MISC_BANK 0x09 |
| 43 | #define ABIT_UGURU3_ALARMS_START 0x1E |
| 44 | #define ABIT_UGURU3_SETTINGS_START 0x24 |
| 45 | #define ABIT_UGURU3_VALUES_START 0x80 |
| 46 | #define ABIT_UGURU3_BOARD_ID 0x0A |
| 47 | /* uGuru3 sensor bank flags */ /* Alarm if: */ |
| 48 | #define ABIT_UGURU3_TEMP_HIGH_ALARM_ENABLE 0x01 /* temp over warn */ |
| 49 | #define ABIT_UGURU3_VOLT_HIGH_ALARM_ENABLE 0x02 /* volt over max */ |
| 50 | #define ABIT_UGURU3_VOLT_LOW_ALARM_ENABLE 0x04 /* volt under min */ |
| 51 | #define ABIT_UGURU3_TEMP_HIGH_ALARM_FLAG 0x10 /* temp is over warn */ |
| 52 | #define ABIT_UGURU3_VOLT_HIGH_ALARM_FLAG 0x20 /* volt is over max */ |
| 53 | #define ABIT_UGURU3_VOLT_LOW_ALARM_FLAG 0x40 /* volt is under min */ |
| 54 | #define ABIT_UGURU3_FAN_LOW_ALARM_ENABLE 0x01 /* fan under min */ |
| 55 | #define ABIT_UGURU3_BEEP_ENABLE 0x08 /* beep if alarm */ |
| 56 | #define ABIT_UGURU3_SHUTDOWN_ENABLE 0x80 /* shutdown if alarm */ |
| 57 | /* sensor types */ |
| 58 | #define ABIT_UGURU3_IN_SENSOR 0 |
| 59 | #define ABIT_UGURU3_TEMP_SENSOR 1 |
| 60 | #define ABIT_UGURU3_FAN_SENSOR 2 |
| 61 | |
| 62 | /* Timeouts / Retries, if these turn out to need a lot of fiddling we could |
| 63 | convert them to params. Determined by trial and error. I assume this is |
| 64 | cpu-speed independent, since the ISA-bus and not the CPU should be the |
| 65 | bottleneck. */ |
| 66 | #define ABIT_UGURU3_WAIT_TIMEOUT 250 |
| 67 | /* Normally the 0xAC at the end of synchronize() is reported after the |
| 68 | first read, but sometimes not and we need to poll */ |
| 69 | #define ABIT_UGURU3_SYNCHRONIZE_TIMEOUT 5 |
| 70 | /* utility macros */ |
| 71 | #define ABIT_UGURU3_NAME "abituguru3" |
| 72 | #define ABIT_UGURU3_DEBUG(format, arg...) \ |
| 73 | if (verbose) \ |
| 74 | printk(KERN_DEBUG ABIT_UGURU3_NAME ": " format , ## arg) |
| 75 | |
| 76 | /* Macros to help calculate the sysfs_names array length */ |
| 77 | #define ABIT_UGURU3_MAX_NO_SENSORS 26 |
| 78 | /* sum of strlen +1 of: in??_input\0, in??_{min,max}\0, in??_{min,max}_alarm\0, |
| 79 | in??_{min,max}_alarm_enable\0, in??_beep\0, in??_shutdown\0, in??_label\0 */ |
| 80 | #define ABIT_UGURU3_IN_NAMES_LENGTH (11 + 2 * 9 + 2 * 15 + 2 * 22 + 10 + 14 + 11) |
| 81 | /* sum of strlen +1 of: temp??_input\0, temp??_max\0, temp??_crit\0, |
| 82 | temp??_alarm\0, temp??_alarm_enable\0, temp??_beep\0, temp??_shutdown\0, |
| 83 | temp??_label\0 */ |
| 84 | #define ABIT_UGURU3_TEMP_NAMES_LENGTH (13 + 11 + 12 + 13 + 20 + 12 + 16 + 13) |
| 85 | /* sum of strlen +1 of: fan??_input\0, fan??_min\0, fan??_alarm\0, |
| 86 | fan??_alarm_enable\0, fan??_beep\0, fan??_shutdown\0, fan??_label\0 */ |
| 87 | #define ABIT_UGURU3_FAN_NAMES_LENGTH (12 + 10 + 12 + 19 + 11 + 15 + 12) |
| 88 | /* Worst case scenario 16 in sensors (longest names_length) and the rest |
| 89 | temp sensors (second longest names_length). */ |
| 90 | #define ABIT_UGURU3_SYSFS_NAMES_LENGTH (16 * ABIT_UGURU3_IN_NAMES_LENGTH + \ |
| 91 | (ABIT_UGURU3_MAX_NO_SENSORS - 16) * ABIT_UGURU3_TEMP_NAMES_LENGTH) |
| 92 | |
| 93 | /* All the macros below are named identical to the openguru2 program |
| 94 | reverse engineered by Louis Kruger, hence the names might not be 100% |
| 95 | logical. I could come up with better names, but I prefer keeping the names |
| 96 | identical so that this driver can be compared with his work more easily. */ |
| 97 | /* Two i/o-ports are used by uGuru */ |
| 98 | #define ABIT_UGURU3_BASE 0x00E0 |
| 99 | #define ABIT_UGURU3_CMD 0x00 |
| 100 | #define ABIT_UGURU3_DATA 0x04 |
| 101 | #define ABIT_UGURU3_REGION_LENGTH 5 |
| 102 | /* The wait_xxx functions return this on success and the last contents |
| 103 | of the DATA register (0-255) on failure. */ |
| 104 | #define ABIT_UGURU3_SUCCESS -1 |
| 105 | /* uGuru status flags */ |
| 106 | #define ABIT_UGURU3_STATUS_READY_FOR_READ 0x01 |
| 107 | #define ABIT_UGURU3_STATUS_BUSY 0x02 |
| 108 | |
| 109 | |
| 110 | /* Structures */ |
| 111 | struct abituguru3_sensor_info { |
| 112 | const char* name; |
| 113 | int port; |
| 114 | int type; |
| 115 | int multiplier; |
| 116 | int divisor; |
| 117 | int offset; |
| 118 | }; |
| 119 | |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 120 | /* Avoid use of flexible array members */ |
| 121 | #define ABIT_UGURU3_MAX_DMI_NAMES 2 |
| 122 | |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 123 | struct abituguru3_motherboard_info { |
| 124 | u16 id; |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 125 | const char *dmi_name[ABIT_UGURU3_MAX_DMI_NAMES + 1]; |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 126 | /* + 1 -> end of sensors indicated by a sensor with name == NULL */ |
| 127 | struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1]; |
| 128 | }; |
| 129 | |
| 130 | /* For the Abit uGuru, we need to keep some data in memory. |
| 131 | The structure is dynamically allocated, at the same time when a new |
| 132 | abituguru3 device is allocated. */ |
| 133 | struct abituguru3_data { |
Tony Jones | 1beeffe | 2007-08-20 13:46:20 -0700 | [diff] [blame] | 134 | struct device *hwmon_dev; /* hwmon registered device */ |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 135 | struct mutex update_lock; /* protect access to data and uGuru */ |
| 136 | unsigned short addr; /* uguru base address */ |
| 137 | char valid; /* !=0 if following fields are valid */ |
| 138 | unsigned long last_updated; /* In jiffies */ |
| 139 | |
| 140 | /* For convenience the sysfs attr and their names are generated |
| 141 | automatically. We have max 10 entries per sensor (for in sensors) */ |
| 142 | struct sensor_device_attribute_2 sysfs_attr[ABIT_UGURU3_MAX_NO_SENSORS |
| 143 | * 10]; |
| 144 | |
| 145 | /* Buffer to store the dynamically generated sysfs names */ |
| 146 | char sysfs_names[ABIT_UGURU3_SYSFS_NAMES_LENGTH]; |
| 147 | |
| 148 | /* Pointer to the sensors info for the detected motherboard */ |
| 149 | const struct abituguru3_sensor_info *sensors; |
| 150 | |
| 151 | /* The abituguru3 supports upto 48 sensors, and thus has registers |
| 152 | sets for 48 sensors, for convienence reasons / simplicity of the |
| 153 | code we always read and store all registers for all 48 sensors */ |
| 154 | |
| 155 | /* Alarms for all 48 sensors (1 bit per sensor) */ |
| 156 | u8 alarms[48/8]; |
| 157 | |
| 158 | /* Value of all 48 sensors */ |
| 159 | u8 value[48]; |
| 160 | |
| 161 | /* Settings of all 48 sensors, note in and temp sensors (the first 32 |
| 162 | sensors) have 3 bytes of settings, while fans only have 2 bytes, |
| 163 | for convenience we use 3 bytes for all sensors */ |
| 164 | u8 settings[48][3]; |
| 165 | }; |
| 166 | |
| 167 | |
| 168 | /* Constants */ |
| 169 | static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 170 | { 0x000C, { NULL } /* Unknown, need DMI string */, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 171 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 172 | { "DDR", 1, 0, 10, 1, 0 }, |
| 173 | { "DDR VTT", 2, 0, 10, 1, 0 }, |
| 174 | { "CPU VTT 1.2V", 3, 0, 10, 1, 0 }, |
| 175 | { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 }, |
| 176 | { "MCH 2.5V", 5, 0, 20, 1, 0 }, |
| 177 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 178 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 179 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 180 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 181 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 182 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 183 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 184 | { "System", 25, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 185 | { "PWM", 26, 1, 1, 1, 0 }, |
| 186 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 187 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 188 | { "SYS FAN", 34, 2, 60, 1, 0 }, |
| 189 | { "AUX1 Fan", 35, 2, 60, 1, 0 }, |
| 190 | { NULL, 0, 0, 0, 0, 0 } } |
| 191 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 192 | { 0x000D, { NULL } /* Abit AW8, need DMI string */, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 193 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 194 | { "DDR", 1, 0, 10, 1, 0 }, |
| 195 | { "DDR VTT", 2, 0, 10, 1, 0 }, |
| 196 | { "CPU VTT 1.2V", 3, 0, 10, 1, 0 }, |
| 197 | { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 }, |
| 198 | { "MCH 2.5V", 5, 0, 20, 1, 0 }, |
| 199 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 200 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 201 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 202 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 203 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 204 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 205 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 206 | { "System", 25, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 207 | { "PWM1", 26, 1, 1, 1, 0 }, |
| 208 | { "PWM2", 27, 1, 1, 1, 0 }, |
| 209 | { "PWM3", 28, 1, 1, 1, 0 }, |
| 210 | { "PWM4", 29, 1, 1, 1, 0 }, |
| 211 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 212 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 213 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 214 | { "AUX1 Fan", 35, 2, 60, 1, 0 }, |
| 215 | { "AUX2 Fan", 36, 2, 60, 1, 0 }, |
| 216 | { "AUX3 Fan", 37, 2, 60, 1, 0 }, |
| 217 | { "AUX4 Fan", 38, 2, 60, 1, 0 }, |
| 218 | { "AUX5 Fan", 39, 2, 60, 1, 0 }, |
| 219 | { NULL, 0, 0, 0, 0, 0 } } |
| 220 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 221 | { 0x000E, { NULL } /* AL-8, need DMI string */, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 222 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 223 | { "DDR", 1, 0, 10, 1, 0 }, |
| 224 | { "DDR VTT", 2, 0, 10, 1, 0 }, |
| 225 | { "CPU VTT 1.2V", 3, 0, 10, 1, 0 }, |
| 226 | { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 }, |
| 227 | { "MCH 2.5V", 5, 0, 20, 1, 0 }, |
| 228 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 229 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 230 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 231 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 232 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 233 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 234 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 235 | { "System", 25, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 236 | { "PWM", 26, 1, 1, 1, 0 }, |
| 237 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 238 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 239 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 240 | { NULL, 0, 0, 0, 0, 0 } } |
| 241 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 242 | { 0x000F, { NULL } /* Unknown, need DMI string */, { |
| 243 | |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 244 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 245 | { "DDR", 1, 0, 10, 1, 0 }, |
| 246 | { "DDR VTT", 2, 0, 10, 1, 0 }, |
| 247 | { "CPU VTT 1.2V", 3, 0, 10, 1, 0 }, |
| 248 | { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 }, |
| 249 | { "MCH 2.5V", 5, 0, 20, 1, 0 }, |
| 250 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 251 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 252 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 253 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 254 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 255 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 256 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 257 | { "System", 25, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 258 | { "PWM", 26, 1, 1, 1, 0 }, |
| 259 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 260 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 261 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 262 | { NULL, 0, 0, 0, 0, 0 } } |
| 263 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 264 | { 0x0010, { NULL } /* Abit NI8 SLI GR, need DMI string */, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 265 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 266 | { "DDR", 1, 0, 10, 1, 0 }, |
| 267 | { "DDR VTT", 2, 0, 10, 1, 0 }, |
| 268 | { "CPU VTT 1.2V", 3, 0, 10, 1, 0 }, |
| 269 | { "NB 1.4V", 4, 0, 10, 1, 0 }, |
| 270 | { "SB 1.5V", 6, 0, 10, 1, 0 }, |
| 271 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 272 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 273 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 274 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 275 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 276 | { "CPU", 24, 1, 1, 1, 0 }, |
| 277 | { "SYS", 25, 1, 1, 1, 0 }, |
| 278 | { "PWM", 26, 1, 1, 1, 0 }, |
| 279 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 280 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 281 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 282 | { "AUX1 Fan", 35, 2, 60, 1, 0 }, |
| 283 | { "OTES1 Fan", 36, 2, 60, 1, 0 }, |
| 284 | { NULL, 0, 0, 0, 0, 0 } } |
| 285 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 286 | { 0x0011, { "AT8 32X", NULL }, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 287 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 288 | { "DDR", 1, 0, 20, 1, 0 }, |
| 289 | { "DDR VTT", 2, 0, 10, 1, 0 }, |
| 290 | { "CPU VDDA 2.5V", 6, 0, 20, 1, 0 }, |
| 291 | { "NB 1.8V", 4, 0, 10, 1, 0 }, |
| 292 | { "NB 1.8V Dual", 5, 0, 10, 1, 0 }, |
| 293 | { "HTV 1.2", 3, 0, 10, 1, 0 }, |
| 294 | { "PCIE 1.2V", 12, 0, 10, 1, 0 }, |
| 295 | { "NB 1.2V", 13, 0, 10, 1, 0 }, |
| 296 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 297 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 298 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 299 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 300 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 301 | { "CPU", 24, 1, 1, 1, 0 }, |
| 302 | { "NB", 25, 1, 1, 1, 0 }, |
| 303 | { "System", 26, 1, 1, 1, 0 }, |
| 304 | { "PWM", 27, 1, 1, 1, 0 }, |
| 305 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 306 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 307 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 308 | { "AUX1 Fan", 35, 2, 60, 1, 0 }, |
| 309 | { "AUX2 Fan", 36, 2, 60, 1, 0 }, |
Alistair John Strachan | 8748a71 | 2008-10-09 15:33:59 +0200 | [diff] [blame] | 310 | { "AUX3 Fan", 37, 2, 60, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 311 | { NULL, 0, 0, 0, 0, 0 } } |
| 312 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 313 | { 0x0012, { NULL } /* Abit AN8 32X, need DMI string */, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 314 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 315 | { "DDR", 1, 0, 20, 1, 0 }, |
| 316 | { "DDR VTT", 2, 0, 10, 1, 0 }, |
| 317 | { "HyperTransport", 3, 0, 10, 1, 0 }, |
| 318 | { "CPU VDDA 2.5V", 5, 0, 20, 1, 0 }, |
| 319 | { "NB", 4, 0, 10, 1, 0 }, |
| 320 | { "SB", 6, 0, 10, 1, 0 }, |
| 321 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 322 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 323 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 324 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 325 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 326 | { "CPU", 24, 1, 1, 1, 0 }, |
| 327 | { "SYS", 25, 1, 1, 1, 0 }, |
| 328 | { "PWM", 26, 1, 1, 1, 0 }, |
| 329 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 330 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 331 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 332 | { "AUX1 Fan", 36, 2, 60, 1, 0 }, |
| 333 | { NULL, 0, 0, 0, 0, 0 } } |
| 334 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 335 | { 0x0013, { NULL } /* Abit AW8D, need DMI string */, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 336 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 337 | { "DDR", 1, 0, 10, 1, 0 }, |
| 338 | { "DDR VTT", 2, 0, 10, 1, 0 }, |
| 339 | { "CPU VTT 1.2V", 3, 0, 10, 1, 0 }, |
| 340 | { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 }, |
| 341 | { "MCH 2.5V", 5, 0, 20, 1, 0 }, |
| 342 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 343 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 344 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 345 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 346 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 347 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 348 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 349 | { "System", 25, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 350 | { "PWM1", 26, 1, 1, 1, 0 }, |
| 351 | { "PWM2", 27, 1, 1, 1, 0 }, |
| 352 | { "PWM3", 28, 1, 1, 1, 0 }, |
| 353 | { "PWM4", 29, 1, 1, 1, 0 }, |
| 354 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 355 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 356 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 357 | { "AUX1 Fan", 35, 2, 60, 1, 0 }, |
| 358 | { "AUX2 Fan", 36, 2, 60, 1, 0 }, |
| 359 | { "AUX3 Fan", 37, 2, 60, 1, 0 }, |
| 360 | { "AUX4 Fan", 38, 2, 60, 1, 0 }, |
Hans de Goede | 1604e78 | 2008-02-26 19:34:48 +0100 | [diff] [blame] | 361 | { "AUX5 Fan", 39, 2, 60, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 362 | { NULL, 0, 0, 0, 0, 0 } } |
| 363 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 364 | { 0x0014, { "AB9", "AB9 Pro", NULL }, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 365 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 366 | { "DDR", 1, 0, 10, 1, 0 }, |
| 367 | { "DDR VTT", 2, 0, 10, 1, 0 }, |
| 368 | { "CPU VTT 1.2V", 3, 0, 10, 1, 0 }, |
| 369 | { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 }, |
| 370 | { "MCH 2.5V", 5, 0, 20, 1, 0 }, |
| 371 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 372 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 373 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 374 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 375 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 376 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 377 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 378 | { "System", 25, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 379 | { "PWM", 26, 1, 1, 1, 0 }, |
| 380 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 381 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 382 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 383 | { NULL, 0, 0, 0, 0, 0 } } |
| 384 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 385 | { 0x0015, { NULL } /* Unknown, need DMI string */, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 386 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 387 | { "DDR", 1, 0, 20, 1, 0 }, |
| 388 | { "DDR VTT", 2, 0, 10, 1, 0 }, |
| 389 | { "HyperTransport", 3, 0, 10, 1, 0 }, |
| 390 | { "CPU VDDA 2.5V", 5, 0, 20, 1, 0 }, |
| 391 | { "NB", 4, 0, 10, 1, 0 }, |
| 392 | { "SB", 6, 0, 10, 1, 0 }, |
| 393 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 394 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 395 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 396 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 397 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 398 | { "CPU", 24, 1, 1, 1, 0 }, |
| 399 | { "SYS", 25, 1, 1, 1, 0 }, |
| 400 | { "PWM", 26, 1, 1, 1, 0 }, |
| 401 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 402 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 403 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 404 | { "AUX1 Fan", 33, 2, 60, 1, 0 }, |
| 405 | { "AUX2 Fan", 35, 2, 60, 1, 0 }, |
| 406 | { "AUX3 Fan", 36, 2, 60, 1, 0 }, |
| 407 | { NULL, 0, 0, 0, 0, 0 } } |
| 408 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 409 | { 0x0016, { "AW9D-MAX", NULL }, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 410 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 411 | { "DDR2", 1, 0, 20, 1, 0 }, |
| 412 | { "DDR2 VTT", 2, 0, 10, 1, 0 }, |
| 413 | { "CPU VTT 1.2V", 3, 0, 10, 1, 0 }, |
| 414 | { "MCH & PCIE 1.5V", 4, 0, 10, 1, 0 }, |
| 415 | { "MCH 2.5V", 5, 0, 20, 1, 0 }, |
| 416 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 417 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 418 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 419 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 420 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 421 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 422 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 423 | { "System", 25, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 424 | { "PWM1", 26, 1, 1, 1, 0 }, |
| 425 | { "PWM2", 27, 1, 1, 1, 0 }, |
| 426 | { "PWM3", 28, 1, 1, 1, 0 }, |
| 427 | { "PWM4", 29, 1, 1, 1, 0 }, |
| 428 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 429 | { "NB Fan", 33, 2, 60, 1, 0 }, |
| 430 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 431 | { "AUX1 Fan", 35, 2, 60, 1, 0 }, |
| 432 | { "AUX2 Fan", 36, 2, 60, 1, 0 }, |
| 433 | { "AUX3 Fan", 37, 2, 60, 1, 0 }, |
| 434 | { "OTES1 Fan", 38, 2, 60, 1, 0 }, |
| 435 | { NULL, 0, 0, 0, 0, 0 } } |
| 436 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 437 | { 0x0017, { NULL } /* Unknown, need DMI string */, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 438 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 439 | { "DDR2", 1, 0, 20, 1, 0 }, |
| 440 | { "DDR2 VTT", 2, 0, 10, 1, 0 }, |
| 441 | { "HyperTransport", 3, 0, 10, 1, 0 }, |
| 442 | { "CPU VDDA 2.5V", 6, 0, 20, 1, 0 }, |
| 443 | { "NB 1.8V", 4, 0, 10, 1, 0 }, |
| 444 | { "NB 1.2V ", 13, 0, 10, 1, 0 }, |
| 445 | { "SB 1.2V", 5, 0, 10, 1, 0 }, |
| 446 | { "PCIE 1.2V", 12, 0, 10, 1, 0 }, |
| 447 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 448 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 449 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 450 | { "ATX +3.3V", 10, 0, 20, 1, 0 }, |
| 451 | { "ATX 5VSB", 11, 0, 30, 1, 0 }, |
| 452 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 453 | { "System", 26, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 454 | { "PWM", 27, 1, 1, 1, 0 }, |
| 455 | { "CPU FAN", 32, 2, 60, 1, 0 }, |
| 456 | { "SYS FAN", 34, 2, 60, 1, 0 }, |
| 457 | { "AUX1 FAN", 35, 2, 60, 1, 0 }, |
| 458 | { "AUX2 FAN", 36, 2, 60, 1, 0 }, |
| 459 | { "AUX3 FAN", 37, 2, 60, 1, 0 }, |
| 460 | { NULL, 0, 0, 0, 0, 0 } } |
| 461 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 462 | { 0x0018, { "AB9 QuadGT", NULL }, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 463 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 464 | { "DDR2", 1, 0, 20, 1, 0 }, |
| 465 | { "DDR2 VTT", 2, 0, 10, 1, 0 }, |
| 466 | { "CPU VTT", 3, 0, 10, 1, 0 }, |
| 467 | { "MCH 1.25V", 4, 0, 10, 1, 0 }, |
| 468 | { "ICHIO 1.5V", 5, 0, 10, 1, 0 }, |
| 469 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 470 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 471 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 472 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 473 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 474 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 475 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 476 | { "System", 25, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 477 | { "PWM Phase1", 26, 1, 1, 1, 0 }, |
| 478 | { "PWM Phase2", 27, 1, 1, 1, 0 }, |
| 479 | { "PWM Phase3", 28, 1, 1, 1, 0 }, |
| 480 | { "PWM Phase4", 29, 1, 1, 1, 0 }, |
| 481 | { "PWM Phase5", 30, 1, 1, 1, 0 }, |
| 482 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 483 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 484 | { "AUX1 Fan", 33, 2, 60, 1, 0 }, |
| 485 | { "AUX2 Fan", 35, 2, 60, 1, 0 }, |
| 486 | { "AUX3 Fan", 36, 2, 60, 1, 0 }, |
| 487 | { NULL, 0, 0, 0, 0, 0 } } |
| 488 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 489 | { 0x0019, { "IN9 32X MAX", NULL }, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 490 | { "CPU Core", 7, 0, 10, 1, 0 }, |
| 491 | { "DDR2", 13, 0, 20, 1, 0 }, |
| 492 | { "DDR2 VTT", 14, 0, 10, 1, 0 }, |
| 493 | { "CPU VTT", 3, 0, 20, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 494 | { "NB 1.2V", 4, 0, 10, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 495 | { "SB 1.5V", 6, 0, 10, 1, 0 }, |
| 496 | { "HyperTransport", 5, 0, 10, 1, 0 }, |
| 497 | { "ATX +12V (24-Pin)", 12, 0, 60, 1, 0 }, |
| 498 | { "ATX +12V (4-pin)", 8, 0, 60, 1, 0 }, |
| 499 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 500 | { "ATX +3.3V", 10, 0, 20, 1, 0 }, |
| 501 | { "ATX 5VSB", 11, 0, 30, 1, 0 }, |
| 502 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 503 | { "System", 25, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 504 | { "PWM Phase1", 26, 1, 1, 1, 0 }, |
| 505 | { "PWM Phase2", 27, 1, 1, 1, 0 }, |
| 506 | { "PWM Phase3", 28, 1, 1, 1, 0 }, |
| 507 | { "PWM Phase4", 29, 1, 1, 1, 0 }, |
| 508 | { "PWM Phase5", 30, 1, 1, 1, 0 }, |
| 509 | { "CPU FAN", 32, 2, 60, 1, 0 }, |
| 510 | { "SYS FAN", 34, 2, 60, 1, 0 }, |
| 511 | { "AUX1 FAN", 33, 2, 60, 1, 0 }, |
| 512 | { "AUX2 FAN", 35, 2, 60, 1, 0 }, |
| 513 | { "AUX3 FAN", 36, 2, 60, 1, 0 }, |
| 514 | { NULL, 0, 0, 0, 0, 0 } } |
| 515 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 516 | { 0x001A, { "IP35 Pro", "IP35 Pro XE", NULL }, { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 517 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 518 | { "DDR2", 1, 0, 20, 1, 0 }, |
| 519 | { "DDR2 VTT", 2, 0, 10, 1, 0 }, |
| 520 | { "CPU VTT 1.2V", 3, 0, 10, 1, 0 }, |
| 521 | { "MCH 1.25V", 4, 0, 10, 1, 0 }, |
| 522 | { "ICHIO 1.5V", 5, 0, 10, 1, 0 }, |
| 523 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 524 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 525 | { "ATX +12V (8-pin)", 8, 0, 60, 1, 0 }, |
| 526 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 527 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 528 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 529 | { "CPU", 24, 1, 1, 1, 0 }, |
Alistair John Strachan | 4777e4e | 2008-10-26 17:04:40 +0100 | [diff] [blame] | 530 | { "System", 25, 1, 1, 1, 0 }, |
| 531 | { "PWM", 26, 1, 1, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 532 | { "PWM Phase2", 27, 1, 1, 1, 0 }, |
| 533 | { "PWM Phase3", 28, 1, 1, 1, 0 }, |
| 534 | { "PWM Phase4", 29, 1, 1, 1, 0 }, |
| 535 | { "PWM Phase5", 30, 1, 1, 1, 0 }, |
| 536 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 537 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 538 | { "AUX1 Fan", 33, 2, 60, 1, 0 }, |
| 539 | { "AUX2 Fan", 35, 2, 60, 1, 0 }, |
| 540 | { "AUX3 Fan", 36, 2, 60, 1, 0 }, |
Sergey Vlasov | cb96b8c | 2008-01-15 21:57:44 +0300 | [diff] [blame] | 541 | { "AUX4 Fan", 37, 2, 60, 1, 0 }, |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 542 | { NULL, 0, 0, 0, 0, 0 } } |
| 543 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 544 | { 0x001B, { NULL } /* Unknown, need DMI string */, { |
Hans de Goede | ff8966a | 2007-10-21 00:55:35 +0200 | [diff] [blame] | 545 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 546 | { "DDR3", 1, 0, 20, 1, 0 }, |
| 547 | { "DDR3 VTT", 2, 0, 10, 1, 0 }, |
| 548 | { "CPU VTT", 3, 0, 10, 1, 0 }, |
| 549 | { "MCH 1.25V", 4, 0, 10, 1, 0 }, |
| 550 | { "ICHIO 1.5V", 5, 0, 10, 1, 0 }, |
| 551 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 552 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 553 | { "ATX +12V (8-pin)", 8, 0, 60, 1, 0 }, |
| 554 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 555 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 556 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 557 | { "CPU", 24, 1, 1, 1, 0 }, |
| 558 | { "System", 25, 1, 1, 1, 0 }, |
| 559 | { "PWM Phase1", 26, 1, 1, 1, 0 }, |
| 560 | { "PWM Phase2", 27, 1, 1, 1, 0 }, |
| 561 | { "PWM Phase3", 28, 1, 1, 1, 0 }, |
| 562 | { "PWM Phase4", 29, 1, 1, 1, 0 }, |
| 563 | { "PWM Phase5", 30, 1, 1, 1, 0 }, |
| 564 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 565 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 566 | { "AUX1 Fan", 33, 2, 60, 1, 0 }, |
| 567 | { "AUX2 Fan", 35, 2, 60, 1, 0 }, |
| 568 | { "AUX3 Fan", 36, 2, 60, 1, 0 }, |
| 569 | { NULL, 0, 0, 0, 0, 0 } } |
| 570 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 571 | { 0x001C, { "IX38 QuadGT", NULL }, { |
Hans de Goede | ff8966a | 2007-10-21 00:55:35 +0200 | [diff] [blame] | 572 | { "CPU Core", 0, 0, 10, 1, 0 }, |
| 573 | { "DDR2", 1, 0, 20, 1, 0 }, |
| 574 | { "DDR2 VTT", 2, 0, 10, 1, 0 }, |
| 575 | { "CPU VTT", 3, 0, 10, 1, 0 }, |
| 576 | { "MCH 1.25V", 4, 0, 10, 1, 0 }, |
| 577 | { "ICHIO 1.5V", 5, 0, 10, 1, 0 }, |
| 578 | { "ICH 1.05V", 6, 0, 10, 1, 0 }, |
| 579 | { "ATX +12V (24-Pin)", 7, 0, 60, 1, 0 }, |
| 580 | { "ATX +12V (8-pin)", 8, 0, 60, 1, 0 }, |
| 581 | { "ATX +5V", 9, 0, 30, 1, 0 }, |
| 582 | { "+3.3V", 10, 0, 20, 1, 0 }, |
| 583 | { "5VSB", 11, 0, 30, 1, 0 }, |
| 584 | { "CPU", 24, 1, 1, 1, 0 }, |
| 585 | { "System", 25, 1, 1, 1, 0 }, |
| 586 | { "PWM Phase1", 26, 1, 1, 1, 0 }, |
| 587 | { "PWM Phase2", 27, 1, 1, 1, 0 }, |
| 588 | { "PWM Phase3", 28, 1, 1, 1, 0 }, |
| 589 | { "PWM Phase4", 29, 1, 1, 1, 0 }, |
| 590 | { "PWM Phase5", 30, 1, 1, 1, 0 }, |
| 591 | { "CPU Fan", 32, 2, 60, 1, 0 }, |
| 592 | { "SYS Fan", 34, 2, 60, 1, 0 }, |
| 593 | { "AUX1 Fan", 33, 2, 60, 1, 0 }, |
| 594 | { "AUX2 Fan", 35, 2, 60, 1, 0 }, |
| 595 | { "AUX3 Fan", 36, 2, 60, 1, 0 }, |
| 596 | { NULL, 0, 0, 0, 0, 0 } } |
| 597 | }, |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 598 | { 0x0000, { NULL }, { { NULL, 0, 0, 0, 0, 0 } } } |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 599 | }; |
| 600 | |
| 601 | |
| 602 | /* Insmod parameters */ |
| 603 | static int force; |
| 604 | module_param(force, bool, 0); |
| 605 | MODULE_PARM_DESC(force, "Set to one to force detection."); |
| 606 | /* Default verbose is 1, since this driver is still in the testing phase */ |
| 607 | static int verbose = 1; |
| 608 | module_param(verbose, bool, 0644); |
| 609 | MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting"); |
| 610 | |
| 611 | |
| 612 | /* wait while the uguru is busy (usually after a write) */ |
| 613 | static int abituguru3_wait_while_busy(struct abituguru3_data *data) |
| 614 | { |
| 615 | u8 x; |
| 616 | int timeout = ABIT_UGURU3_WAIT_TIMEOUT; |
| 617 | |
| 618 | while ((x = inb_p(data->addr + ABIT_UGURU3_DATA)) & |
| 619 | ABIT_UGURU3_STATUS_BUSY) { |
| 620 | timeout--; |
| 621 | if (timeout == 0) |
| 622 | return x; |
| 623 | /* sleep a bit before our last try, to give the uGuru3 one |
| 624 | last chance to respond. */ |
| 625 | if (timeout == 1) |
| 626 | msleep(1); |
| 627 | } |
| 628 | return ABIT_UGURU3_SUCCESS; |
| 629 | } |
| 630 | |
| 631 | /* wait till uguru is ready to be read */ |
| 632 | static int abituguru3_wait_for_read(struct abituguru3_data *data) |
| 633 | { |
| 634 | u8 x; |
| 635 | int timeout = ABIT_UGURU3_WAIT_TIMEOUT; |
| 636 | |
| 637 | while (!((x = inb_p(data->addr + ABIT_UGURU3_DATA)) & |
| 638 | ABIT_UGURU3_STATUS_READY_FOR_READ)) { |
| 639 | timeout--; |
| 640 | if (timeout == 0) |
| 641 | return x; |
| 642 | /* sleep a bit before our last try, to give the uGuru3 one |
| 643 | last chance to respond. */ |
| 644 | if (timeout == 1) |
| 645 | msleep(1); |
| 646 | } |
| 647 | return ABIT_UGURU3_SUCCESS; |
| 648 | } |
| 649 | |
| 650 | /* This synchronizes us with the uGuru3's protocol state machine, this |
| 651 | must be done before each command. */ |
| 652 | static int abituguru3_synchronize(struct abituguru3_data *data) |
| 653 | { |
| 654 | int x, timeout = ABIT_UGURU3_SYNCHRONIZE_TIMEOUT; |
| 655 | |
| 656 | if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) { |
| 657 | ABIT_UGURU3_DEBUG("synchronize timeout during initial busy " |
| 658 | "wait, status: 0x%02x\n", x); |
| 659 | return -EIO; |
| 660 | } |
| 661 | |
| 662 | outb(0x20, data->addr + ABIT_UGURU3_DATA); |
| 663 | if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) { |
| 664 | ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x20, " |
| 665 | "status: 0x%02x\n", x); |
| 666 | return -EIO; |
| 667 | } |
| 668 | |
| 669 | outb(0x10, data->addr + ABIT_UGURU3_CMD); |
| 670 | if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) { |
| 671 | ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x10, " |
| 672 | "status: 0x%02x\n", x); |
| 673 | return -EIO; |
| 674 | } |
| 675 | |
| 676 | outb(0x00, data->addr + ABIT_UGURU3_CMD); |
| 677 | if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) { |
| 678 | ABIT_UGURU3_DEBUG("synchronize timeout after sending 0x00, " |
| 679 | "status: 0x%02x\n", x); |
| 680 | return -EIO; |
| 681 | } |
| 682 | |
| 683 | if ((x = abituguru3_wait_for_read(data)) != ABIT_UGURU3_SUCCESS) { |
| 684 | ABIT_UGURU3_DEBUG("synchronize timeout waiting for read, " |
| 685 | "status: 0x%02x\n", x); |
| 686 | return -EIO; |
| 687 | } |
| 688 | |
| 689 | while ((x = inb(data->addr + ABIT_UGURU3_CMD)) != 0xAC) { |
| 690 | timeout--; |
| 691 | if (timeout == 0) { |
| 692 | ABIT_UGURU3_DEBUG("synchronize timeout cmd does not " |
| 693 | "hold 0xAC after synchronize, cmd: 0x%02x\n", |
| 694 | x); |
| 695 | return -EIO; |
| 696 | } |
| 697 | msleep(1); |
| 698 | } |
| 699 | return 0; |
| 700 | } |
| 701 | |
| 702 | /* Read count bytes from sensor sensor_addr in bank bank_addr and store the |
| 703 | result in buf */ |
| 704 | static int abituguru3_read(struct abituguru3_data *data, u8 bank, u8 offset, |
| 705 | u8 count, u8 *buf) |
| 706 | { |
| 707 | int i, x; |
| 708 | |
| 709 | if ((x = abituguru3_synchronize(data))) |
| 710 | return x; |
| 711 | |
| 712 | outb(0x1A, data->addr + ABIT_UGURU3_DATA); |
| 713 | if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) { |
| 714 | ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after " |
| 715 | "sending 0x1A, status: 0x%02x\n", (unsigned int)bank, |
| 716 | (unsigned int)offset, x); |
| 717 | return -EIO; |
| 718 | } |
| 719 | |
| 720 | outb(bank, data->addr + ABIT_UGURU3_CMD); |
| 721 | if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) { |
| 722 | ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after " |
| 723 | "sending the bank, status: 0x%02x\n", |
| 724 | (unsigned int)bank, (unsigned int)offset, x); |
| 725 | return -EIO; |
| 726 | } |
| 727 | |
| 728 | outb(offset, data->addr + ABIT_UGURU3_CMD); |
| 729 | if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) { |
| 730 | ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after " |
| 731 | "sending the offset, status: 0x%02x\n", |
| 732 | (unsigned int)bank, (unsigned int)offset, x); |
| 733 | return -EIO; |
| 734 | } |
| 735 | |
| 736 | outb(count, data->addr + ABIT_UGURU3_CMD); |
| 737 | if ((x = abituguru3_wait_while_busy(data)) != ABIT_UGURU3_SUCCESS) { |
| 738 | ABIT_UGURU3_DEBUG("read from 0x%02x:0x%02x timed out after " |
| 739 | "sending the count, status: 0x%02x\n", |
| 740 | (unsigned int)bank, (unsigned int)offset, x); |
| 741 | return -EIO; |
| 742 | } |
| 743 | |
| 744 | for (i = 0; i < count; i++) { |
| 745 | if ((x = abituguru3_wait_for_read(data)) != |
| 746 | ABIT_UGURU3_SUCCESS) { |
| 747 | ABIT_UGURU3_DEBUG("timeout reading byte %d from " |
| 748 | "0x%02x:0x%02x, status: 0x%02x\n", i, |
| 749 | (unsigned int)bank, (unsigned int)offset, x); |
| 750 | break; |
| 751 | } |
| 752 | buf[i] = inb(data->addr + ABIT_UGURU3_CMD); |
| 753 | } |
| 754 | return i; |
| 755 | } |
| 756 | |
| 757 | /* Sensor settings are stored 1 byte per offset with the bytes |
| 758 | placed add consecutive offsets. */ |
Adrian Bunk | 4688902 | 2007-07-29 16:57:01 +0200 | [diff] [blame] | 759 | static int abituguru3_read_increment_offset(struct abituguru3_data *data, |
| 760 | u8 bank, u8 offset, u8 count, |
| 761 | u8 *buf, int offset_count) |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 762 | { |
| 763 | int i, x; |
| 764 | |
| 765 | for (i = 0; i < offset_count; i++) |
| 766 | if ((x = abituguru3_read(data, bank, offset + i, count, |
Jean Delvare | 3bb9db7 | 2009-03-12 13:36:38 +0100 | [diff] [blame] | 767 | buf + i * count)) != count) { |
| 768 | if (x < 0) |
| 769 | return x; |
| 770 | return i * count + x; |
| 771 | } |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 772 | |
| 773 | return i * count; |
| 774 | } |
| 775 | |
| 776 | /* Following are the sysfs callback functions. These functions expect: |
| 777 | sensor_device_attribute_2->index: index into the data->sensors array |
| 778 | sensor_device_attribute_2->nr: register offset, bitmask or NA. */ |
| 779 | static struct abituguru3_data *abituguru3_update_device(struct device *dev); |
| 780 | |
| 781 | static ssize_t show_value(struct device *dev, |
| 782 | struct device_attribute *devattr, char *buf) |
| 783 | { |
| 784 | int value; |
| 785 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); |
| 786 | struct abituguru3_data *data = abituguru3_update_device(dev); |
| 787 | const struct abituguru3_sensor_info *sensor; |
| 788 | |
| 789 | if (!data) |
| 790 | return -EIO; |
| 791 | |
| 792 | sensor = &data->sensors[attr->index]; |
| 793 | |
| 794 | /* are we reading a setting, or is this a normal read? */ |
| 795 | if (attr->nr) |
| 796 | value = data->settings[sensor->port][attr->nr]; |
| 797 | else |
| 798 | value = data->value[sensor->port]; |
| 799 | |
| 800 | /* convert the value */ |
| 801 | value = (value * sensor->multiplier) / sensor->divisor + |
| 802 | sensor->offset; |
| 803 | |
| 804 | /* alternatively we could update the sensors settings struct for this, |
| 805 | but then its contents would differ from the windows sw ini files */ |
| 806 | if (sensor->type == ABIT_UGURU3_TEMP_SENSOR) |
| 807 | value *= 1000; |
| 808 | |
| 809 | return sprintf(buf, "%d\n", value); |
| 810 | } |
| 811 | |
| 812 | static ssize_t show_alarm(struct device *dev, |
| 813 | struct device_attribute *devattr, char *buf) |
| 814 | { |
| 815 | int port; |
| 816 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); |
| 817 | struct abituguru3_data *data = abituguru3_update_device(dev); |
| 818 | |
| 819 | if (!data) |
| 820 | return -EIO; |
| 821 | |
| 822 | port = data->sensors[attr->index].port; |
| 823 | |
| 824 | /* See if the alarm bit for this sensor is set and if a bitmask is |
| 825 | given in attr->nr also check if the alarm matches the type of alarm |
| 826 | we're looking for (for volt it can be either low or high). The type |
| 827 | is stored in a few readonly bits in the settings of the sensor. */ |
| 828 | if ((data->alarms[port / 8] & (0x01 << (port % 8))) && |
| 829 | (!attr->nr || (data->settings[port][0] & attr->nr))) |
| 830 | return sprintf(buf, "1\n"); |
| 831 | else |
| 832 | return sprintf(buf, "0\n"); |
| 833 | } |
| 834 | |
| 835 | static ssize_t show_mask(struct device *dev, |
| 836 | struct device_attribute *devattr, char *buf) |
| 837 | { |
| 838 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); |
| 839 | struct abituguru3_data *data = dev_get_drvdata(dev); |
| 840 | |
| 841 | if (data->settings[data->sensors[attr->index].port][0] & attr->nr) |
| 842 | return sprintf(buf, "1\n"); |
| 843 | else |
| 844 | return sprintf(buf, "0\n"); |
| 845 | } |
| 846 | |
| 847 | static ssize_t show_label(struct device *dev, |
| 848 | struct device_attribute *devattr, char *buf) |
| 849 | { |
| 850 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); |
| 851 | struct abituguru3_data *data = dev_get_drvdata(dev); |
| 852 | |
| 853 | return sprintf(buf, "%s\n", data->sensors[attr->index].name); |
| 854 | } |
| 855 | |
| 856 | static ssize_t show_name(struct device *dev, |
| 857 | struct device_attribute *devattr, char *buf) |
| 858 | { |
| 859 | return sprintf(buf, "%s\n", ABIT_UGURU3_NAME); |
| 860 | } |
| 861 | |
| 862 | /* Sysfs attr templates, the real entries are generated automatically. */ |
| 863 | static const |
| 864 | struct sensor_device_attribute_2 abituguru3_sysfs_templ[3][10] = { { |
| 865 | SENSOR_ATTR_2(in%d_input, 0444, show_value, NULL, 0, 0), |
| 866 | SENSOR_ATTR_2(in%d_min, 0444, show_value, NULL, 1, 0), |
| 867 | SENSOR_ATTR_2(in%d_max, 0444, show_value, NULL, 2, 0), |
| 868 | SENSOR_ATTR_2(in%d_min_alarm, 0444, show_alarm, NULL, |
| 869 | ABIT_UGURU3_VOLT_LOW_ALARM_FLAG, 0), |
| 870 | SENSOR_ATTR_2(in%d_max_alarm, 0444, show_alarm, NULL, |
| 871 | ABIT_UGURU3_VOLT_HIGH_ALARM_FLAG, 0), |
| 872 | SENSOR_ATTR_2(in%d_beep, 0444, show_mask, NULL, |
| 873 | ABIT_UGURU3_BEEP_ENABLE, 0), |
| 874 | SENSOR_ATTR_2(in%d_shutdown, 0444, show_mask, NULL, |
| 875 | ABIT_UGURU3_SHUTDOWN_ENABLE, 0), |
| 876 | SENSOR_ATTR_2(in%d_min_alarm_enable, 0444, show_mask, NULL, |
| 877 | ABIT_UGURU3_VOLT_LOW_ALARM_ENABLE, 0), |
| 878 | SENSOR_ATTR_2(in%d_max_alarm_enable, 0444, show_mask, NULL, |
| 879 | ABIT_UGURU3_VOLT_HIGH_ALARM_ENABLE, 0), |
| 880 | SENSOR_ATTR_2(in%d_label, 0444, show_label, NULL, 0, 0) |
| 881 | }, { |
| 882 | SENSOR_ATTR_2(temp%d_input, 0444, show_value, NULL, 0, 0), |
| 883 | SENSOR_ATTR_2(temp%d_max, 0444, show_value, NULL, 1, 0), |
| 884 | SENSOR_ATTR_2(temp%d_crit, 0444, show_value, NULL, 2, 0), |
| 885 | SENSOR_ATTR_2(temp%d_alarm, 0444, show_alarm, NULL, 0, 0), |
| 886 | SENSOR_ATTR_2(temp%d_beep, 0444, show_mask, NULL, |
| 887 | ABIT_UGURU3_BEEP_ENABLE, 0), |
| 888 | SENSOR_ATTR_2(temp%d_shutdown, 0444, show_mask, NULL, |
| 889 | ABIT_UGURU3_SHUTDOWN_ENABLE, 0), |
| 890 | SENSOR_ATTR_2(temp%d_alarm_enable, 0444, show_mask, NULL, |
| 891 | ABIT_UGURU3_TEMP_HIGH_ALARM_ENABLE, 0), |
| 892 | SENSOR_ATTR_2(temp%d_label, 0444, show_label, NULL, 0, 0) |
| 893 | }, { |
| 894 | SENSOR_ATTR_2(fan%d_input, 0444, show_value, NULL, 0, 0), |
| 895 | SENSOR_ATTR_2(fan%d_min, 0444, show_value, NULL, 1, 0), |
| 896 | SENSOR_ATTR_2(fan%d_alarm, 0444, show_alarm, NULL, 0, 0), |
| 897 | SENSOR_ATTR_2(fan%d_beep, 0444, show_mask, NULL, |
| 898 | ABIT_UGURU3_BEEP_ENABLE, 0), |
| 899 | SENSOR_ATTR_2(fan%d_shutdown, 0444, show_mask, NULL, |
| 900 | ABIT_UGURU3_SHUTDOWN_ENABLE, 0), |
| 901 | SENSOR_ATTR_2(fan%d_alarm_enable, 0444, show_mask, NULL, |
| 902 | ABIT_UGURU3_FAN_LOW_ALARM_ENABLE, 0), |
| 903 | SENSOR_ATTR_2(fan%d_label, 0444, show_label, NULL, 0, 0) |
| 904 | } }; |
| 905 | |
| 906 | static struct sensor_device_attribute_2 abituguru3_sysfs_attr[] = { |
| 907 | SENSOR_ATTR_2(name, 0444, show_name, NULL, 0, 0), |
| 908 | }; |
| 909 | |
| 910 | static int __devinit abituguru3_probe(struct platform_device *pdev) |
| 911 | { |
| 912 | const int no_sysfs_attr[3] = { 10, 8, 7 }; |
| 913 | int sensor_index[3] = { 0, 1, 1 }; |
| 914 | struct abituguru3_data *data; |
| 915 | int i, j, type, used, sysfs_names_free, sysfs_attr_i, res = -ENODEV; |
| 916 | char *sysfs_filename; |
| 917 | u8 buf[2]; |
| 918 | u16 id; |
| 919 | |
| 920 | if (!(data = kzalloc(sizeof(struct abituguru3_data), GFP_KERNEL))) |
| 921 | return -ENOMEM; |
| 922 | |
| 923 | data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; |
| 924 | mutex_init(&data->update_lock); |
| 925 | platform_set_drvdata(pdev, data); |
| 926 | |
| 927 | /* Read the motherboard ID */ |
| 928 | if ((i = abituguru3_read(data, ABIT_UGURU3_MISC_BANK, |
| 929 | ABIT_UGURU3_BOARD_ID, 2, buf)) != 2) { |
| 930 | goto abituguru3_probe_error; |
| 931 | } |
| 932 | |
| 933 | /* Completely read the uGuru to see if one really is there */ |
| 934 | if (!abituguru3_update_device(&pdev->dev)) |
| 935 | goto abituguru3_probe_error; |
| 936 | |
| 937 | /* lookup the ID in our motherboard table */ |
| 938 | id = ((u16)buf[0] << 8) | (u16)buf[1]; |
| 939 | for (i = 0; abituguru3_motherboards[i].id; i++) |
| 940 | if (abituguru3_motherboards[i].id == id) |
| 941 | break; |
| 942 | if (!abituguru3_motherboards[i].id) { |
| 943 | printk(KERN_ERR ABIT_UGURU3_NAME ": error unknown motherboard " |
| 944 | "ID: %04X. Please report this to the abituguru3 " |
| 945 | "maintainer (see MAINTAINERS)\n", (unsigned int)id); |
| 946 | goto abituguru3_probe_error; |
| 947 | } |
| 948 | data->sensors = abituguru3_motherboards[i].sensors; |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 949 | |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 950 | printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard " |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 951 | "ID: %04X\n", (unsigned int)id); |
| 952 | |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 953 | /* Fill the sysfs attr array */ |
| 954 | sysfs_attr_i = 0; |
| 955 | sysfs_filename = data->sysfs_names; |
| 956 | sysfs_names_free = ABIT_UGURU3_SYSFS_NAMES_LENGTH; |
| 957 | for (i = 0; data->sensors[i].name; i++) { |
| 958 | /* Fail safe check, this should never happen! */ |
| 959 | if (i >= ABIT_UGURU3_MAX_NO_SENSORS) { |
| 960 | printk(KERN_ERR ABIT_UGURU3_NAME |
| 961 | ": Fatal error motherboard has more sensors " |
| 962 | "then ABIT_UGURU3_MAX_NO_SENSORS. This should " |
| 963 | "never happen please report to the abituguru3 " |
| 964 | "maintainer (see MAINTAINERS)\n"); |
| 965 | res = -ENAMETOOLONG; |
| 966 | goto abituguru3_probe_error; |
| 967 | } |
| 968 | type = data->sensors[i].type; |
| 969 | for (j = 0; j < no_sysfs_attr[type]; j++) { |
| 970 | used = snprintf(sysfs_filename, sysfs_names_free, |
| 971 | abituguru3_sysfs_templ[type][j].dev_attr.attr. |
| 972 | name, sensor_index[type]) + 1; |
| 973 | data->sysfs_attr[sysfs_attr_i] = |
| 974 | abituguru3_sysfs_templ[type][j]; |
| 975 | data->sysfs_attr[sysfs_attr_i].dev_attr.attr.name = |
| 976 | sysfs_filename; |
| 977 | data->sysfs_attr[sysfs_attr_i].index = i; |
| 978 | sysfs_filename += used; |
| 979 | sysfs_names_free -= used; |
| 980 | sysfs_attr_i++; |
| 981 | } |
| 982 | sensor_index[type]++; |
| 983 | } |
| 984 | /* Fail safe check, this should never happen! */ |
| 985 | if (sysfs_names_free < 0) { |
| 986 | printk(KERN_ERR ABIT_UGURU3_NAME |
| 987 | ": Fatal error ran out of space for sysfs attr names. " |
| 988 | "This should never happen please report to the " |
| 989 | "abituguru3 maintainer (see MAINTAINERS)\n"); |
| 990 | res = -ENAMETOOLONG; |
| 991 | goto abituguru3_probe_error; |
| 992 | } |
| 993 | |
| 994 | /* Register sysfs hooks */ |
| 995 | for (i = 0; i < sysfs_attr_i; i++) |
| 996 | if (device_create_file(&pdev->dev, |
| 997 | &data->sysfs_attr[i].dev_attr)) |
| 998 | goto abituguru3_probe_error; |
| 999 | for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++) |
| 1000 | if (device_create_file(&pdev->dev, |
| 1001 | &abituguru3_sysfs_attr[i].dev_attr)) |
| 1002 | goto abituguru3_probe_error; |
| 1003 | |
Tony Jones | 1beeffe | 2007-08-20 13:46:20 -0700 | [diff] [blame] | 1004 | data->hwmon_dev = hwmon_device_register(&pdev->dev); |
| 1005 | if (IS_ERR(data->hwmon_dev)) { |
| 1006 | res = PTR_ERR(data->hwmon_dev); |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1007 | goto abituguru3_probe_error; |
| 1008 | } |
| 1009 | |
| 1010 | return 0; /* success */ |
| 1011 | |
| 1012 | abituguru3_probe_error: |
| 1013 | for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++) |
| 1014 | device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr); |
| 1015 | for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++) |
| 1016 | device_remove_file(&pdev->dev, |
| 1017 | &abituguru3_sysfs_attr[i].dev_attr); |
| 1018 | kfree(data); |
| 1019 | return res; |
| 1020 | } |
| 1021 | |
| 1022 | static int __devexit abituguru3_remove(struct platform_device *pdev) |
| 1023 | { |
| 1024 | int i; |
| 1025 | struct abituguru3_data *data = platform_get_drvdata(pdev); |
| 1026 | |
| 1027 | platform_set_drvdata(pdev, NULL); |
Tony Jones | 1beeffe | 2007-08-20 13:46:20 -0700 | [diff] [blame] | 1028 | hwmon_device_unregister(data->hwmon_dev); |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1029 | for (i = 0; data->sysfs_attr[i].dev_attr.attr.name; i++) |
| 1030 | device_remove_file(&pdev->dev, &data->sysfs_attr[i].dev_attr); |
| 1031 | for (i = 0; i < ARRAY_SIZE(abituguru3_sysfs_attr); i++) |
| 1032 | device_remove_file(&pdev->dev, |
| 1033 | &abituguru3_sysfs_attr[i].dev_attr); |
| 1034 | kfree(data); |
| 1035 | |
| 1036 | return 0; |
| 1037 | } |
| 1038 | |
| 1039 | static struct abituguru3_data *abituguru3_update_device(struct device *dev) |
| 1040 | { |
| 1041 | int i; |
| 1042 | struct abituguru3_data *data = dev_get_drvdata(dev); |
| 1043 | |
| 1044 | mutex_lock(&data->update_lock); |
| 1045 | if (!data->valid || time_after(jiffies, data->last_updated + HZ)) { |
| 1046 | /* Clear data->valid while updating */ |
| 1047 | data->valid = 0; |
| 1048 | /* Read alarms */ |
| 1049 | if (abituguru3_read_increment_offset(data, |
| 1050 | ABIT_UGURU3_SETTINGS_BANK, |
| 1051 | ABIT_UGURU3_ALARMS_START, |
| 1052 | 1, data->alarms, 48/8) != (48/8)) |
| 1053 | goto LEAVE_UPDATE; |
| 1054 | /* Read in and temp sensors (3 byte settings / sensor) */ |
| 1055 | for (i = 0; i < 32; i++) { |
| 1056 | if (abituguru3_read(data, ABIT_UGURU3_SENSORS_BANK, |
| 1057 | ABIT_UGURU3_VALUES_START + i, |
| 1058 | 1, &data->value[i]) != 1) |
| 1059 | goto LEAVE_UPDATE; |
| 1060 | if (abituguru3_read_increment_offset(data, |
| 1061 | ABIT_UGURU3_SETTINGS_BANK, |
| 1062 | ABIT_UGURU3_SETTINGS_START + i * 3, |
| 1063 | 1, |
| 1064 | data->settings[i], 3) != 3) |
| 1065 | goto LEAVE_UPDATE; |
| 1066 | } |
| 1067 | /* Read temp sensors (2 byte settings / sensor) */ |
| 1068 | for (i = 0; i < 16; i++) { |
| 1069 | if (abituguru3_read(data, ABIT_UGURU3_SENSORS_BANK, |
| 1070 | ABIT_UGURU3_VALUES_START + 32 + i, |
| 1071 | 1, &data->value[32 + i]) != 1) |
| 1072 | goto LEAVE_UPDATE; |
| 1073 | if (abituguru3_read_increment_offset(data, |
| 1074 | ABIT_UGURU3_SETTINGS_BANK, |
| 1075 | ABIT_UGURU3_SETTINGS_START + 32 * 3 + |
| 1076 | i * 2, 1, |
| 1077 | data->settings[32 + i], 2) != 2) |
| 1078 | goto LEAVE_UPDATE; |
| 1079 | } |
| 1080 | data->last_updated = jiffies; |
| 1081 | data->valid = 1; |
| 1082 | } |
| 1083 | LEAVE_UPDATE: |
| 1084 | mutex_unlock(&data->update_lock); |
| 1085 | if (data->valid) |
| 1086 | return data; |
| 1087 | else |
| 1088 | return NULL; |
| 1089 | } |
| 1090 | |
| 1091 | #ifdef CONFIG_PM |
| 1092 | static int abituguru3_suspend(struct platform_device *pdev, pm_message_t state) |
| 1093 | { |
| 1094 | struct abituguru3_data *data = platform_get_drvdata(pdev); |
| 1095 | /* make sure all communications with the uguru3 are done and no new |
| 1096 | ones are started */ |
| 1097 | mutex_lock(&data->update_lock); |
| 1098 | return 0; |
| 1099 | } |
| 1100 | |
| 1101 | static int abituguru3_resume(struct platform_device *pdev) |
| 1102 | { |
| 1103 | struct abituguru3_data *data = platform_get_drvdata(pdev); |
| 1104 | mutex_unlock(&data->update_lock); |
| 1105 | return 0; |
| 1106 | } |
| 1107 | #else |
| 1108 | #define abituguru3_suspend NULL |
| 1109 | #define abituguru3_resume NULL |
| 1110 | #endif /* CONFIG_PM */ |
| 1111 | |
| 1112 | static struct platform_driver abituguru3_driver = { |
| 1113 | .driver = { |
| 1114 | .owner = THIS_MODULE, |
| 1115 | .name = ABIT_UGURU3_NAME, |
| 1116 | }, |
| 1117 | .probe = abituguru3_probe, |
| 1118 | .remove = __devexit_p(abituguru3_remove), |
| 1119 | .suspend = abituguru3_suspend, |
| 1120 | .resume = abituguru3_resume |
| 1121 | }; |
| 1122 | |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1123 | #ifdef CONFIG_DMI |
| 1124 | |
| 1125 | static int __init abituguru3_dmi_detect(void) |
| 1126 | { |
| 1127 | const char *board_vendor, *board_name; |
| 1128 | int i, err = (force) ? 1 : -ENODEV; |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 1129 | const char *const *dmi_name; |
Alistair John Strachan | 058943d | 2009-01-15 22:27:47 +0100 | [diff] [blame] | 1130 | size_t sublen; |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1131 | |
| 1132 | board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); |
| 1133 | if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/")) |
| 1134 | return err; |
| 1135 | |
| 1136 | board_name = dmi_get_system_info(DMI_BOARD_NAME); |
| 1137 | if (!board_name) |
| 1138 | return err; |
| 1139 | |
Alistair John Strachan | 058943d | 2009-01-15 22:27:47 +0100 | [diff] [blame] | 1140 | /* At the moment, we don't care about the part of the vendor |
| 1141 | * DMI string contained in brackets. Truncate the string at |
| 1142 | * the first occurrence of a bracket. Trim any trailing space |
| 1143 | * from the substring. |
| 1144 | */ |
| 1145 | sublen = strcspn(board_name, "("); |
| 1146 | while (sublen > 0 && board_name[sublen - 1] == ' ') |
| 1147 | sublen--; |
| 1148 | |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1149 | for (i = 0; abituguru3_motherboards[i].id; i++) { |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 1150 | dmi_name = abituguru3_motherboards[i].dmi_name; |
| 1151 | for ( ; *dmi_name; dmi_name++) { |
| 1152 | if (strlen(*dmi_name) != sublen) |
| 1153 | continue; |
| 1154 | if (!strncasecmp(board_name, *dmi_name, sublen)) |
| 1155 | return 0; |
| 1156 | } |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1157 | } |
| 1158 | |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 1159 | /* No match found */ |
| 1160 | return 1; |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1161 | } |
| 1162 | |
| 1163 | #else /* !CONFIG_DMI */ |
| 1164 | |
| 1165 | static inline int abituguru3_dmi_detect(void) |
| 1166 | { |
Alistair John Strachan | 46a5f17 | 2009-01-15 22:27:48 +0100 | [diff] [blame] | 1167 | return 1; |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1168 | } |
| 1169 | |
| 1170 | #endif /* CONFIG_DMI */ |
| 1171 | |
| 1172 | /* FIXME: Manual detection should die eventually; we need to collect stable |
| 1173 | * DMI model names first before we can rely entirely on CONFIG_DMI. |
| 1174 | */ |
| 1175 | |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1176 | static int __init abituguru3_detect(void) |
| 1177 | { |
Hans de Goede | 9c2e14a | 2007-07-02 23:08:26 +0200 | [diff] [blame] | 1178 | /* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or |
| 1179 | 0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05 |
Hans de Goede | b3aeab0 | 2008-05-23 16:10:41 +0200 | [diff] [blame] | 1180 | or 0x55 at CMD instead, why is unknown. */ |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1181 | u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA); |
| 1182 | u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD); |
Hans de Goede | 9c2e14a | 2007-07-02 23:08:26 +0200 | [diff] [blame] | 1183 | if (((data_val == 0x00) || (data_val == 0x08)) && |
Hans de Goede | b3aeab0 | 2008-05-23 16:10:41 +0200 | [diff] [blame] | 1184 | ((cmd_val == 0xAC) || (cmd_val == 0x05) || |
| 1185 | (cmd_val == 0x55))) |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1186 | return 0; |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1187 | |
| 1188 | ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = " |
| 1189 | "0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val); |
| 1190 | |
| 1191 | if (force) { |
| 1192 | printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is " |
| 1193 | "present because of \"force\" parameter\n"); |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1194 | return 0; |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1195 | } |
| 1196 | |
| 1197 | /* No uGuru3 found */ |
| 1198 | return -ENODEV; |
| 1199 | } |
| 1200 | |
| 1201 | static struct platform_device *abituguru3_pdev; |
| 1202 | |
| 1203 | static int __init abituguru3_init(void) |
| 1204 | { |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1205 | struct resource res = { .flags = IORESOURCE_IO }; |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1206 | int err; |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1207 | |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1208 | /* Attempt DMI detection first */ |
| 1209 | err = abituguru3_dmi_detect(); |
| 1210 | if (err < 0) |
| 1211 | return err; |
Hans de Goede | b3aeab0 | 2008-05-23 16:10:41 +0200 | [diff] [blame] | 1212 | |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1213 | /* Fall back to manual detection if there was no exact |
| 1214 | * board name match, or force was specified. |
| 1215 | */ |
| 1216 | if (err > 0) { |
| 1217 | err = abituguru3_detect(); |
| 1218 | if (err) |
| 1219 | return err; |
Alistair John Strachan | bbe5939 | 2009-09-15 17:18:10 +0200 | [diff] [blame] | 1220 | |
| 1221 | #ifdef CONFIG_DMI |
| 1222 | printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was " |
| 1223 | "not detected using DMI. Please send the output of " |
| 1224 | "\"dmidecode\" to the abituguru3 maintainer " |
| 1225 | "(see MAINTAINERS)\n"); |
| 1226 | #endif |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1227 | } |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1228 | |
| 1229 | err = platform_driver_register(&abituguru3_driver); |
| 1230 | if (err) |
| 1231 | goto exit; |
| 1232 | |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1233 | abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, |
| 1234 | ABIT_UGURU3_BASE); |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1235 | if (!abituguru3_pdev) { |
| 1236 | printk(KERN_ERR ABIT_UGURU3_NAME |
| 1237 | ": Device allocation failed\n"); |
| 1238 | err = -ENOMEM; |
| 1239 | goto exit_driver_unregister; |
| 1240 | } |
| 1241 | |
Alistair John Strachan | 4ef664b | 2008-08-15 00:40:39 -0700 | [diff] [blame] | 1242 | res.start = ABIT_UGURU3_BASE; |
| 1243 | res.end = ABIT_UGURU3_BASE + ABIT_UGURU3_REGION_LENGTH - 1; |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 1244 | res.name = ABIT_UGURU3_NAME; |
| 1245 | |
| 1246 | err = platform_device_add_resources(abituguru3_pdev, &res, 1); |
| 1247 | if (err) { |
| 1248 | printk(KERN_ERR ABIT_UGURU3_NAME |
| 1249 | ": Device resource addition failed (%d)\n", err); |
| 1250 | goto exit_device_put; |
| 1251 | } |
| 1252 | |
| 1253 | err = platform_device_add(abituguru3_pdev); |
| 1254 | if (err) { |
| 1255 | printk(KERN_ERR ABIT_UGURU3_NAME |
| 1256 | ": Device addition failed (%d)\n", err); |
| 1257 | goto exit_device_put; |
| 1258 | } |
| 1259 | |
| 1260 | return 0; |
| 1261 | |
| 1262 | exit_device_put: |
| 1263 | platform_device_put(abituguru3_pdev); |
| 1264 | exit_driver_unregister: |
| 1265 | platform_driver_unregister(&abituguru3_driver); |
| 1266 | exit: |
| 1267 | return err; |
| 1268 | } |
| 1269 | |
| 1270 | static void __exit abituguru3_exit(void) |
| 1271 | { |
| 1272 | platform_device_unregister(abituguru3_pdev); |
| 1273 | platform_driver_unregister(&abituguru3_driver); |
| 1274 | } |
| 1275 | |
| 1276 | MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>"); |
| 1277 | MODULE_DESCRIPTION("Abit uGuru3 Sensor device"); |
| 1278 | MODULE_LICENSE("GPL"); |
| 1279 | |
| 1280 | module_init(abituguru3_init); |
| 1281 | module_exit(abituguru3_exit); |