Blame - include/linux/usb/net2280.h - kernel/msm-4.9

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

1

/*

2

* NetChip 2280 high/full speed USB device controller.

3

* Unlike many such controllers, this one talks PCI.

Robert P. J. Day

dda43a0

2008-03-07 13:45:32 -0500

[diff] [blame]

4

*

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

*

* This program is free software; you can redistribute it and/or modify

9

* it under the terms of the GNU General Public License as published by

10

* the Free Software Foundation; either version 2 of the License, or

11

* (at your option) any later version.

12

*

13

* This program is distributed in the hope that it will be useful,

14

* but WITHOUT ANY WARRANTY; without even the implied warranty of

15

* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

16

* GNU General Public License for more details.

17

*

18

* You should have received a copy of the GNU General Public License

19

* along with this program; if not, write to the Free Software

20

* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

21

*/

22

Robert P. J. Day

dda43a0

2008-03-07 13:45:32 -0500

[diff] [blame]

23

#ifndef __LINUX_USB_NET2280_H

24

#define __LINUX_USB_NET2280_H

25

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

26

/*-------------------------------------------------------------------------*/

27

28

/* NET2280 MEMORY MAPPED REGISTERS

29

*

30

* The register layout came from the chip documentation, and the bit

31

* number definitions were extracted from chip specification.

32

*

33

* Use the shift operator ('<<') to build bit masks, with readl/writel

34

* to access the registers through PCI.

35

*/

36

37

/* main registers, BAR0 + 0x0000 */

38

struct net2280_regs {

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

39

/* offset 0x0000 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

40

u32 devinit;

41

#define LOCAL_CLOCK_FREQUENCY 8

42

#define FORCE_PCI_RESET 7

43

#define PCI_ID 6

44

#define PCI_ENABLE 5

45

#define FIFO_SOFT_RESET 4

46

#define CFG_SOFT_RESET 3

47

#define PCI_SOFT_RESET 2

48

#define USB_SOFT_RESET 1

49

#define M8051_RESET 0

50

u32 eectl;

51

#define EEPROM_ADDRESS_WIDTH 23

52

#define EEPROM_CHIP_SELECT_ACTIVE 22

53

#define EEPROM_PRESENT 21

54

#define EEPROM_VALID 20

55

#define EEPROM_BUSY 19

56

#define EEPROM_CHIP_SELECT_ENABLE 18

57

#define EEPROM_BYTE_READ_START 17

58

#define EEPROM_BYTE_WRITE_START 16

59

#define EEPROM_READ_DATA 8

60

#define EEPROM_WRITE_DATA 0

61

u32 eeclkfreq;

62

u32 _unused0;

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

63

/* offset 0x0010 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

64

65

u32 pciirqenb0; /* interrupt PCI master ... */

66

#define SETUP_PACKET_INTERRUPT_ENABLE 7

67

#define ENDPOINT_F_INTERRUPT_ENABLE 6

68

#define ENDPOINT_E_INTERRUPT_ENABLE 5

69

#define ENDPOINT_D_INTERRUPT_ENABLE 4

70

#define ENDPOINT_C_INTERRUPT_ENABLE 3

71

#define ENDPOINT_B_INTERRUPT_ENABLE 2

72

#define ENDPOINT_A_INTERRUPT_ENABLE 1

73

#define ENDPOINT_0_INTERRUPT_ENABLE 0

74

u32 pciirqenb1;

75

#define PCI_INTERRUPT_ENABLE 31

76

#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27

77

#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26

78

#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25

79

#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20

80

#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19

81

#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18

82

#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17

83

#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16

84

#define GPIO_INTERRUPT_ENABLE 13

85

#define DMA_D_INTERRUPT_ENABLE 12

86

#define DMA_C_INTERRUPT_ENABLE 11

87

#define DMA_B_INTERRUPT_ENABLE 10

88

#define DMA_A_INTERRUPT_ENABLE 9

89

#define EEPROM_DONE_INTERRUPT_ENABLE 8

90

#define VBUS_INTERRUPT_ENABLE 7

91

#define CONTROL_STATUS_INTERRUPT_ENABLE 6

92

#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4

93

#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3

94

#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2

95

#define RESUME_INTERRUPT_ENABLE 1

96

#define SOF_INTERRUPT_ENABLE 0

97

u32 cpu_irqenb0; /* ... or onboard 8051 */

98

#define SETUP_PACKET_INTERRUPT_ENABLE 7

99

#define ENDPOINT_F_INTERRUPT_ENABLE 6

100

#define ENDPOINT_E_INTERRUPT_ENABLE 5

101

#define ENDPOINT_D_INTERRUPT_ENABLE 4

102

#define ENDPOINT_C_INTERRUPT_ENABLE 3

103

#define ENDPOINT_B_INTERRUPT_ENABLE 2

104

#define ENDPOINT_A_INTERRUPT_ENABLE 1

105

#define ENDPOINT_0_INTERRUPT_ENABLE 0

106

u32 cpu_irqenb1;

107

#define CPU_INTERRUPT_ENABLE 31

108

#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27

109

#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26

110

#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25

111

#define PCI_INTA_INTERRUPT_ENABLE 24

112

#define PCI_PME_INTERRUPT_ENABLE 23

113

#define PCI_SERR_INTERRUPT_ENABLE 22

114

#define PCI_PERR_INTERRUPT_ENABLE 21

115

#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20

116

#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19

117

#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17

118

#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16

119

#define GPIO_INTERRUPT_ENABLE 13

120

#define DMA_D_INTERRUPT_ENABLE 12

121

#define DMA_C_INTERRUPT_ENABLE 11

122

#define DMA_B_INTERRUPT_ENABLE 10

123

#define DMA_A_INTERRUPT_ENABLE 9

124

#define EEPROM_DONE_INTERRUPT_ENABLE 8

125

#define VBUS_INTERRUPT_ENABLE 7

126

#define CONTROL_STATUS_INTERRUPT_ENABLE 6

127

#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4

128

#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3

129

#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2

130

#define RESUME_INTERRUPT_ENABLE 1

131

#define SOF_INTERRUPT_ENABLE 0

132

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

133

/* offset 0x0020 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

134

u32 _unused1;

135

u32 usbirqenb1;

136

#define USB_INTERRUPT_ENABLE 31

137

#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27

138

#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26

139

#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25

140

#define PCI_INTA_INTERRUPT_ENABLE 24

141

#define PCI_PME_INTERRUPT_ENABLE 23

142

#define PCI_SERR_INTERRUPT_ENABLE 22

143

#define PCI_PERR_INTERRUPT_ENABLE 21

144

#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20

145

#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19

146

#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17

147

#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16

148

#define GPIO_INTERRUPT_ENABLE 13

149

#define DMA_D_INTERRUPT_ENABLE 12

150

#define DMA_C_INTERRUPT_ENABLE 11

151

#define DMA_B_INTERRUPT_ENABLE 10

152

#define DMA_A_INTERRUPT_ENABLE 9

153

#define EEPROM_DONE_INTERRUPT_ENABLE 8

154

#define VBUS_INTERRUPT_ENABLE 7

155

#define CONTROL_STATUS_INTERRUPT_ENABLE 6

156

#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4

157

#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3

158

#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2

159

#define RESUME_INTERRUPT_ENABLE 1

160

#define SOF_INTERRUPT_ENABLE 0

161

u32 irqstat0;

162

#define INTA_ASSERTED 12

163

#define SETUP_PACKET_INTERRUPT 7

164

#define ENDPOINT_F_INTERRUPT 6

165

#define ENDPOINT_E_INTERRUPT 5

166

#define ENDPOINT_D_INTERRUPT 4

167

#define ENDPOINT_C_INTERRUPT 3

168

#define ENDPOINT_B_INTERRUPT 2

169

#define ENDPOINT_A_INTERRUPT 1

170

#define ENDPOINT_0_INTERRUPT 0

171

u32 irqstat1;

172

#define POWER_STATE_CHANGE_INTERRUPT 27

173

#define PCI_ARBITER_TIMEOUT_INTERRUPT 26

174

#define PCI_PARITY_ERROR_INTERRUPT 25

175

#define PCI_INTA_INTERRUPT 24

176

#define PCI_PME_INTERRUPT 23

177

#define PCI_SERR_INTERRUPT 22

178

#define PCI_PERR_INTERRUPT 21

179

#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20

180

#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19

181

#define PCI_RETRY_ABORT_INTERRUPT 17

182

#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16

183

#define SOF_DOWN_INTERRUPT 14

184

#define GPIO_INTERRUPT 13

185

#define DMA_D_INTERRUPT 12

186

#define DMA_C_INTERRUPT 11

187

#define DMA_B_INTERRUPT 10

188

#define DMA_A_INTERRUPT 9

189

#define EEPROM_DONE_INTERRUPT 8

190

#define VBUS_INTERRUPT 7

191

#define CONTROL_STATUS_INTERRUPT 6

192

#define ROOT_PORT_RESET_INTERRUPT 4

193

#define SUSPEND_REQUEST_INTERRUPT 3

194

#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2

195

#define RESUME_INTERRUPT 1

196

#define SOF_INTERRUPT 0

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

197

/* offset 0x0030 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

u32 idxaddr;

u32 idxdata;

u32 fifoctl;

#define PCI_BASE2_RANGE 16

202

#define IGNORE_FIFO_AVAILABILITY 3

203

#define PCI_BASE2_SELECT 2

204

#define FIFO_CONFIGURATION_SELECT 0

205

u32 _unused2;

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

206

/* offset 0x0040 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

u32 memaddr;

#define START 28

#define DIRECTION 27

#define FIFO_DIAGNOSTIC_SELECT 24

211

#define MEMORY_ADDRESS 0

212

u32 memdata0;

213

u32 memdata1;

214

u32 _unused3;

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

215

/* offset 0x0050 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

216

u32 gpioctl;

217

#define GPIO3_LED_SELECT 12

218

#define GPIO3_INTERRUPT_ENABLE 11

219

#define GPIO2_INTERRUPT_ENABLE 10

220

#define GPIO1_INTERRUPT_ENABLE 9

221

#define GPIO0_INTERRUPT_ENABLE 8

222

#define GPIO3_OUTPUT_ENABLE 7

223

#define GPIO2_OUTPUT_ENABLE 6

224

#define GPIO1_OUTPUT_ENABLE 5

225

#define GPIO0_OUTPUT_ENABLE 4

#define GPIO3_DATA 3

#define GPIO2_DATA 2

#define GPIO1_DATA 1

#define GPIO0_DATA 0

u32 gpiostat;

#define GPIO3_INTERRUPT 3

232

#define GPIO2_INTERRUPT 2

233

#define GPIO1_INTERRUPT 1

234

#define GPIO0_INTERRUPT 0

235

} __attribute__ ((packed));

236

237

/* usb control, BAR0 + 0x0080 */

238

struct net2280_usb_regs {

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

239

/* offset 0x0080 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

240

u32 stdrsp;

241

#define STALL_UNSUPPORTED_REQUESTS 31

242

#define SET_TEST_MODE 16

243

#define GET_OTHER_SPEED_CONFIGURATION 15

244

#define GET_DEVICE_QUALIFIER 14

245

#define SET_ADDRESS 13

246

#define ENDPOINT_SET_CLEAR_HALT 12

247

#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11

248

#define GET_STRING_DESCRIPTOR_2 10

249

#define GET_STRING_DESCRIPTOR_1 9

250

#define GET_STRING_DESCRIPTOR_0 8

251

#define GET_SET_INTERFACE 6

252

#define GET_SET_CONFIGURATION 5

253

#define GET_CONFIGURATION_DESCRIPTOR 4

254

#define GET_DEVICE_DESCRIPTOR 3

255

#define GET_ENDPOINT_STATUS 2

256

#define GET_INTERFACE_STATUS 1

257

#define GET_DEVICE_STATUS 0

258

u32 prodvendid;

259

#define PRODUCT_ID 16

#define VENDOR_ID 0

u32 relnum;

u32 usbctl;

#define SERIAL_NUMBER_INDEX 16

264

#define PRODUCT_ID_STRING_ENABLE 13

265

#define VENDOR_ID_STRING_ENABLE 12

266

#define USB_ROOT_PORT_WAKEUP_ENABLE 11

267

#define VBUS_PIN 10

268

#define TIMED_DISCONNECT 9

269

#define SUSPEND_IMMEDIATELY 7

270

#define SELF_POWERED_USB_DEVICE 6

271

#define REMOTE_WAKEUP_SUPPORT 5

272

#define PME_POLARITY 4

273

#define USB_DETECT_ENABLE 3

274

#define PME_WAKEUP_ENABLE 2

275

#define DEVICE_REMOTE_WAKEUP_ENABLE 1

276

#define SELF_POWERED_STATUS 0

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

277

/* offset 0x0090 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

u32 usbstat;

#define HIGH_SPEED 7

#define FULL_SPEED 6

#define GENERATE_RESUME 5

282

#define GENERATE_DEVICE_REMOTE_WAKEUP 4

283

u32 xcvrdiag;

284

#define FORCE_HIGH_SPEED_MODE 31

285

#define FORCE_FULL_SPEED_MODE 30

286

#define USB_TEST_MODE 24

287

#define LINE_STATE 16

288

#define TRANSCEIVER_OPERATION_MODE 2

289

#define TRANSCEIVER_SELECT 1

290

#define TERMINATION_SELECT 0

291

u32 setup0123;

292

u32 setup4567;

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

293

/* offset 0x0090 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

294

u32 _unused0;

295

u32 ouraddr;

296

#define FORCE_IMMEDIATE 7

297

#define OUR_USB_ADDRESS 0

298

u32 ourconfig;

299

} __attribute__ ((packed));

300

301

/* pci control, BAR0 + 0x0100 */

302

struct net2280_pci_regs {

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

303

/* offset 0x0100 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

304

u32 pcimstctl;

305

#define PCI_ARBITER_PARK_SELECT 13

306

#define PCI_MULTI LEVEL_ARBITER 12

307

#define PCI_RETRY_ABORT_ENABLE 11

308

#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10

309

#define DMA_READ_MULTIPLE_ENABLE 9

310

#define DMA_READ_LINE_ENABLE 8

311

#define PCI_MASTER_COMMAND_SELECT 6

312

#define MEM_READ_OR_WRITE 0

313

#define IO_READ_OR_WRITE 1

314

#define CFG_READ_OR_WRITE 2

315

#define PCI_MASTER_START 5

316

#define PCI_MASTER_READ_WRITE 4

317

#define PCI_MASTER_WRITE 0

318

#define PCI_MASTER_READ 1

319

#define PCI_MASTER_BYTE_WRITE_ENABLES 0

u32 pcimstaddr;

u32 pcimstdata;

u32 pcimststat;

#define PCI_ARBITER_CLEAR 2

324

#define PCI_EXTERNAL_ARBITER 1

325

#define PCI_HOST_MODE 0

326

} __attribute__ ((packed));

327

328

/* dma control, BAR0 + 0x0180 ... array of four structs like this,

329

* for channels 0..3. see also struct net2280_dma: descriptor

330

* that can be loaded into some of these registers.

331

*/

332

struct net2280_dma_regs { /* [11.7] */

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

333

/* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

334

u32 dmactl;

335

#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25

336

#define DMA_CLEAR_COUNT_ENABLE 21

337

#define DESCRIPTOR_POLLING_RATE 19

338

#define POLL_CONTINUOUS 0

339

#define POLL_1_USEC 1

340

#define POLL_100_USEC 2

341

#define POLL_1_MSEC 3

342

#define DMA_VALID_BIT_POLLING_ENABLE 18

343

#define DMA_VALID_BIT_ENABLE 17

344

#define DMA_SCATTER_GATHER_ENABLE 16

345

#define DMA_OUT_AUTO_START_ENABLE 4

346

#define DMA_PREEMPT_ENABLE 3

347

#define DMA_FIFO_VALIDATE 2

348

#define DMA_ENABLE 1

349

#define DMA_ADDRESS_HOLD 0

350

u32 dmastat;

351

#define DMA_ABORT_DONE_INTERRUPT 27

352

#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25

353

#define DMA_TRANSACTION_DONE_INTERRUPT 24

354

#define DMA_ABORT 1

355

#define DMA_START 0

356

u32 _unused0 [2];

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

357

/* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

358

u32 dmacount;

359

#define VALID_BIT 31

360

#define DMA_DIRECTION 30

361

#define DMA_DONE_INTERRUPT_ENABLE 29

362

#define END_OF_CHAIN 28

363

#define DMA_BYTE_COUNT_MASK ((1<<24)-1)

364

#define DMA_BYTE_COUNT 0

u32 dmaaddr;

u32 dmadesc;

u32 _unused1;

} __attribute__ ((packed));

369

370

/* dedicated endpoint registers, BAR0 + 0x0200 */

371

372

struct net2280_dep_regs { /* [11.8] */

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

373

/* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

374

u32 dep_cfg;

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

375

/* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

376

u32 dep_rsp;

377

u32 _unused [2];

378

} __attribute__ ((packed));

379

380

/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs

381

* like this, for ep0 then the configurable endpoints A..F

382

* ep0 reserved for control; E and F have only 64 bytes of fifo

383

*/

384

struct net2280_ep_regs { /* [11.9] */

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

385

/* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

386

u32 ep_cfg;

387

#define ENDPOINT_BYTE_COUNT 16

388

#define ENDPOINT_ENABLE 10

389

#define ENDPOINT_TYPE 8

390

#define ENDPOINT_DIRECTION 7

391

#define ENDPOINT_NUMBER 0

392

u32 ep_rsp;

393

#define SET_NAK_OUT_PACKETS 15

394

#define SET_EP_HIDE_STATUS_PHASE 14

395

#define SET_EP_FORCE_CRC_ERROR 13

396

#define SET_INTERRUPT_MODE 12

397

#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11

398

#define SET_NAK_OUT_PACKETS_MODE 10

399

#define SET_ENDPOINT_TOGGLE 9

400

#define SET_ENDPOINT_HALT 8

401

#define CLEAR_NAK_OUT_PACKETS 7

402

#define CLEAR_EP_HIDE_STATUS_PHASE 6

403

#define CLEAR_EP_FORCE_CRC_ERROR 5

404

#define CLEAR_INTERRUPT_MODE 4

405

#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3

406

#define CLEAR_NAK_OUT_PACKETS_MODE 2

407

#define CLEAR_ENDPOINT_TOGGLE 1

408

#define CLEAR_ENDPOINT_HALT 0

409

u32 ep_irqenb;

410

#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6

411

#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5

412

#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3

413

#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2

414

#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1

415

#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0

416

u32 ep_stat;

417

#define FIFO_VALID_COUNT 24

418

#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22

419

#define TIMEOUT 21

420

#define USB_STALL_SENT 20

421

#define USB_IN_NAK_SENT 19

422

#define USB_IN_ACK_RCVD 18

423

#define USB_OUT_PING_NAK_SENT 17

424

#define USB_OUT_ACK_SENT 16

425

#define FIFO_OVERFLOW 13

426

#define FIFO_UNDERFLOW 12

427

#define FIFO_FULL 11

428

#define FIFO_EMPTY 10

429

#define FIFO_FLUSH 9

430

#define SHORT_PACKET_OUT_DONE_INTERRUPT 6

431

#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5

432

#define NAK_OUT_PACKETS 4

433

#define DATA_PACKET_RECEIVED_INTERRUPT 3

434

#define DATA_PACKET_TRANSMITTED_INTERRUPT 2

435

#define DATA_OUT_PING_TOKEN_INTERRUPT 1

436

#define DATA_IN_TOKEN_INTERRUPT 0

Greg Kroah-Hartman

41dceed

2008-01-30 15:21:33 -0800

[diff] [blame]

437

/* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */

Pete Zaitcev

9fc4831

2006-04-02 10:21:26 -0800

[diff] [blame]

u32 ep_avail;

u32 ep_data;

u32 _unused0 [2];

} __attribute__ ((packed));

442

443

#endif /* __LINUX_USB_NET2280_H */