blob: 099eee8851e55e3cc4991eca53cdbd541eafe954 [file] [log] [blame]
Antoine Ténart942a31b2014-07-07 12:16:07 +02001/*
2 * Marvell Berlin SATA PHY driver
3 *
4 * Copyright (C) 2014 Marvell Technology Group Ltd.
5 *
6 * Antoine Ténart <antoine.tenart@free-electrons.com>
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
11 */
12
13#include <linux/clk.h>
14#include <linux/module.h>
15#include <linux/phy/phy.h>
16#include <linux/io.h>
17#include <linux/platform_device.h>
18
19#define HOST_VSA_ADDR 0x0
20#define HOST_VSA_DATA 0x4
21#define PORT_SCR_CTL 0x2c
22#define PORT_VSR_ADDR 0x78
23#define PORT_VSR_DATA 0x7c
24
25#define CONTROL_REGISTER 0x0
26#define MBUS_SIZE_CONTROL 0x4
27
28#define POWER_DOWN_PHY0 BIT(6)
29#define POWER_DOWN_PHY1 BIT(14)
30#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16)
31#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19)
32
Sebastian Hesselbarth8203f8b2014-10-30 11:21:25 +010033#define BG2_PHY_BASE 0x080
Sebastian Hesselbartha98d41d2014-10-30 11:21:24 +010034#define BG2Q_PHY_BASE 0x200
Antoine Ténart942a31b2014-07-07 12:16:07 +020035
36/* register 0x01 */
37#define REF_FREF_SEL_25 BIT(0)
38#define PHY_MODE_SATA (0x0 << 5)
39
40/* register 0x02 */
41#define USE_MAX_PLL_RATE BIT(12)
42
43/* register 0x23 */
44#define DATA_BIT_WIDTH_10 (0x0 << 10)
45#define DATA_BIT_WIDTH_20 (0x1 << 10)
46#define DATA_BIT_WIDTH_40 (0x2 << 10)
47
48/* register 0x25 */
49#define PHY_GEN_MAX_1_5 (0x0 << 10)
50#define PHY_GEN_MAX_3_0 (0x1 << 10)
51#define PHY_GEN_MAX_6_0 (0x2 << 10)
52
53struct phy_berlin_desc {
54 struct phy *phy;
55 u32 power_bit;
56 unsigned index;
57};
58
59struct phy_berlin_priv {
60 void __iomem *base;
61 spinlock_t lock;
62 struct clk *clk;
63 struct phy_berlin_desc **phys;
64 unsigned nphys;
Sebastian Hesselbartha98d41d2014-10-30 11:21:24 +010065 u32 phy_base;
Antoine Ténart942a31b2014-07-07 12:16:07 +020066};
67
Sebastian Hesselbartha98d41d2014-10-30 11:21:24 +010068static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg,
69 u32 phy_base, u32 reg, u32 mask, u32 val)
Antoine Ténart942a31b2014-07-07 12:16:07 +020070{
71 u32 regval;
72
73 /* select register */
Sebastian Hesselbartha98d41d2014-10-30 11:21:24 +010074 writel(phy_base + reg, ctrl_reg + PORT_VSR_ADDR);
Antoine Ténart942a31b2014-07-07 12:16:07 +020075
76 /* set bits */
77 regval = readl(ctrl_reg + PORT_VSR_DATA);
78 regval &= ~mask;
79 regval |= val;
80 writel(regval, ctrl_reg + PORT_VSR_DATA);
81}
82
83static int phy_berlin_sata_power_on(struct phy *phy)
84{
85 struct phy_berlin_desc *desc = phy_get_drvdata(phy);
86 struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
87 void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80);
88 int ret = 0;
89 u32 regval;
90
91 clk_prepare_enable(priv->clk);
92
93 spin_lock(&priv->lock);
94
95 /* Power on PHY */
96 writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
97 regval = readl(priv->base + HOST_VSA_DATA);
98 regval &= ~desc->power_bit;
99 writel(regval, priv->base + HOST_VSA_DATA);
100
101 /* Configure MBus */
102 writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR);
103 regval = readl(priv->base + HOST_VSA_DATA);
104 regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128;
105 writel(regval, priv->base + HOST_VSA_DATA);
106
107 /* set PHY mode and ref freq to 25 MHz */
Sebastian Hesselbartha98d41d2014-10-30 11:21:24 +0100108 phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x01,
109 0x00ff, REF_FREF_SEL_25 | PHY_MODE_SATA);
Antoine Ténart942a31b2014-07-07 12:16:07 +0200110
111 /* set PHY up to 6 Gbps */
Sebastian Hesselbartha98d41d2014-10-30 11:21:24 +0100112 phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x25,
113 0x0c00, PHY_GEN_MAX_6_0);
Antoine Ténart942a31b2014-07-07 12:16:07 +0200114
115 /* set 40 bits width */
Sebastian Hesselbartha98d41d2014-10-30 11:21:24 +0100116 phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x23,
117 0x0c00, DATA_BIT_WIDTH_40);
Antoine Ténart942a31b2014-07-07 12:16:07 +0200118
119 /* use max pll rate */
Sebastian Hesselbartha98d41d2014-10-30 11:21:24 +0100120 phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x02,
121 0x0000, USE_MAX_PLL_RATE);
Antoine Ténart942a31b2014-07-07 12:16:07 +0200122
123 /* set Gen3 controller speed */
124 regval = readl(ctrl_reg + PORT_SCR_CTL);
125 regval &= ~GENMASK(7, 4);
126 regval |= 0x30;
127 writel(regval, ctrl_reg + PORT_SCR_CTL);
128
129 spin_unlock(&priv->lock);
130
131 clk_disable_unprepare(priv->clk);
132
133 return ret;
134}
135
136static int phy_berlin_sata_power_off(struct phy *phy)
137{
138 struct phy_berlin_desc *desc = phy_get_drvdata(phy);
139 struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
140 u32 regval;
141
142 clk_prepare_enable(priv->clk);
143
144 spin_lock(&priv->lock);
145
146 /* Power down PHY */
147 writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
148 regval = readl(priv->base + HOST_VSA_DATA);
149 regval |= desc->power_bit;
150 writel(regval, priv->base + HOST_VSA_DATA);
151
152 spin_unlock(&priv->lock);
153
154 clk_disable_unprepare(priv->clk);
155
156 return 0;
157}
158
159static struct phy *phy_berlin_sata_phy_xlate(struct device *dev,
160 struct of_phandle_args *args)
161{
162 struct phy_berlin_priv *priv = dev_get_drvdata(dev);
163 int i;
164
165 if (WARN_ON(args->args[0] >= priv->nphys))
166 return ERR_PTR(-ENODEV);
167
168 for (i = 0; i < priv->nphys; i++) {
169 if (priv->phys[i]->index == args->args[0])
170 break;
171 }
172
173 if (i == priv->nphys)
174 return ERR_PTR(-ENODEV);
175
176 return priv->phys[i]->phy;
177}
178
179static struct phy_ops phy_berlin_sata_ops = {
180 .power_on = phy_berlin_sata_power_on,
181 .power_off = phy_berlin_sata_power_off,
182 .owner = THIS_MODULE,
183};
184
185static u32 phy_berlin_power_down_bits[] = {
186 POWER_DOWN_PHY0,
187 POWER_DOWN_PHY1,
188};
189
190static int phy_berlin_sata_probe(struct platform_device *pdev)
191{
192 struct device *dev = &pdev->dev;
193 struct device_node *child;
194 struct phy *phy;
195 struct phy_provider *phy_provider;
196 struct phy_berlin_priv *priv;
197 struct resource *res;
198 int i = 0;
199 u32 phy_id;
200
201 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
202 if (!priv)
203 return -ENOMEM;
204
205 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
206 if (!res)
207 return -EINVAL;
208
209 priv->base = devm_ioremap(dev, res->start, resource_size(res));
210 if (!priv->base)
211 return -ENOMEM;
212
213 priv->clk = devm_clk_get(dev, NULL);
214 if (IS_ERR(priv->clk))
215 return PTR_ERR(priv->clk);
216
217 priv->nphys = of_get_child_count(dev->of_node);
218 if (priv->nphys == 0)
219 return -ENODEV;
220
221 priv->phys = devm_kzalloc(dev, priv->nphys * sizeof(*priv->phys),
222 GFP_KERNEL);
223 if (!priv->phys)
224 return -ENOMEM;
225
Sebastian Hesselbarth8203f8b2014-10-30 11:21:25 +0100226 if (of_device_is_compatible(dev->of_node, "marvell,berlin2-sata-phy"))
227 priv->phy_base = BG2_PHY_BASE;
228 else
229 priv->phy_base = BG2Q_PHY_BASE;
Sebastian Hesselbartha98d41d2014-10-30 11:21:24 +0100230
Antoine Ténart942a31b2014-07-07 12:16:07 +0200231 dev_set_drvdata(dev, priv);
232 spin_lock_init(&priv->lock);
233
234 for_each_available_child_of_node(dev->of_node, child) {
235 struct phy_berlin_desc *phy_desc;
236
237 if (of_property_read_u32(child, "reg", &phy_id)) {
238 dev_err(dev, "missing reg property in node %s\n",
239 child->name);
240 return -EINVAL;
241 }
242
243 if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) {
244 dev_err(dev, "invalid reg in node %s\n", child->name);
245 return -EINVAL;
246 }
247
248 phy_desc = devm_kzalloc(dev, sizeof(*phy_desc), GFP_KERNEL);
249 if (!phy_desc)
250 return -ENOMEM;
251
Heikki Krogerusdbc98632014-11-19 17:28:21 +0200252 phy = devm_phy_create(dev, NULL, &phy_berlin_sata_ops);
Antoine Ténart942a31b2014-07-07 12:16:07 +0200253 if (IS_ERR(phy)) {
254 dev_err(dev, "failed to create PHY %d\n", phy_id);
255 return PTR_ERR(phy);
256 }
257
258 phy_desc->phy = phy;
259 phy_desc->power_bit = phy_berlin_power_down_bits[phy_id];
260 phy_desc->index = phy_id;
261 phy_set_drvdata(phy, phy_desc);
262
263 priv->phys[i++] = phy_desc;
264
265 /* Make sure the PHY is off */
266 phy_berlin_sata_power_off(phy);
267 }
268
269 phy_provider =
270 devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate);
Gregory CLEMENTc1fc0052014-11-13 12:47:43 +0100271 return PTR_ERR_OR_ZERO(phy_provider);
Antoine Ténart942a31b2014-07-07 12:16:07 +0200272}
273
274static const struct of_device_id phy_berlin_sata_of_match[] = {
Sebastian Hesselbarth8203f8b2014-10-30 11:21:25 +0100275 { .compatible = "marvell,berlin2-sata-phy" },
Antoine Ténart942a31b2014-07-07 12:16:07 +0200276 { .compatible = "marvell,berlin2q-sata-phy" },
277 { },
278};
279
280static struct platform_driver phy_berlin_sata_driver = {
281 .probe = phy_berlin_sata_probe,
282 .driver = {
283 .name = "phy-berlin-sata",
Antoine Ténart942a31b2014-07-07 12:16:07 +0200284 .of_match_table = phy_berlin_sata_of_match,
285 },
286};
287module_platform_driver(phy_berlin_sata_driver);
288
289MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver");
290MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>");
291MODULE_LICENSE("GPL v2");