Alex Smith | 911a888 | 2015-03-09 14:29:04 +0000 | [diff] [blame] | 1 | /* |
| 2 | * JZ4780 NAND/external memory controller (NEMC) |
| 3 | * |
| 4 | * Copyright (c) 2015 Imagination Technologies |
| 5 | * Author: Alex Smith <alex@alex-smith.me.uk> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License version 2 as published |
| 9 | * by the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/clk.h> |
| 13 | #include <linux/init.h> |
| 14 | #include <linux/math64.h> |
| 15 | #include <linux/of.h> |
| 16 | #include <linux/of_address.h> |
| 17 | #include <linux/of_device.h> |
| 18 | #include <linux/of_platform.h> |
| 19 | #include <linux/platform_device.h> |
| 20 | #include <linux/slab.h> |
| 21 | #include <linux/spinlock.h> |
| 22 | |
| 23 | #include <linux/jz4780-nemc.h> |
| 24 | |
| 25 | #define NEMC_SMCRn(n) (0x14 + (((n) - 1) * 4)) |
| 26 | #define NEMC_NFCSR 0x50 |
| 27 | |
| 28 | #define NEMC_SMCR_SMT BIT(0) |
| 29 | #define NEMC_SMCR_BW_SHIFT 6 |
| 30 | #define NEMC_SMCR_BW_MASK (0x3 << NEMC_SMCR_BW_SHIFT) |
| 31 | #define NEMC_SMCR_BW_8 (0 << 6) |
| 32 | #define NEMC_SMCR_TAS_SHIFT 8 |
| 33 | #define NEMC_SMCR_TAS_MASK (0xf << NEMC_SMCR_TAS_SHIFT) |
| 34 | #define NEMC_SMCR_TAH_SHIFT 12 |
| 35 | #define NEMC_SMCR_TAH_MASK (0xf << NEMC_SMCR_TAH_SHIFT) |
| 36 | #define NEMC_SMCR_TBP_SHIFT 16 |
| 37 | #define NEMC_SMCR_TBP_MASK (0xf << NEMC_SMCR_TBP_SHIFT) |
| 38 | #define NEMC_SMCR_TAW_SHIFT 20 |
| 39 | #define NEMC_SMCR_TAW_MASK (0xf << NEMC_SMCR_TAW_SHIFT) |
| 40 | #define NEMC_SMCR_TSTRV_SHIFT 24 |
| 41 | #define NEMC_SMCR_TSTRV_MASK (0x3f << NEMC_SMCR_TSTRV_SHIFT) |
| 42 | |
| 43 | #define NEMC_NFCSR_NFEn(n) BIT(((n) - 1) << 1) |
| 44 | #define NEMC_NFCSR_NFCEn(n) BIT((((n) - 1) << 1) + 1) |
| 45 | #define NEMC_NFCSR_TNFEn(n) BIT(16 + (n) - 1) |
| 46 | |
| 47 | struct jz4780_nemc { |
| 48 | spinlock_t lock; |
| 49 | struct device *dev; |
| 50 | void __iomem *base; |
| 51 | struct clk *clk; |
| 52 | uint32_t clk_period; |
| 53 | unsigned long banks_present; |
| 54 | }; |
| 55 | |
| 56 | /** |
| 57 | * jz4780_nemc_num_banks() - count the number of banks referenced by a device |
| 58 | * @dev: device to count banks for, must be a child of the NEMC. |
| 59 | * |
| 60 | * Return: The number of unique NEMC banks referred to by the specified NEMC |
| 61 | * child device. Unique here means that a device that references the same bank |
| 62 | * multiple times in the its "reg" property will only count once. |
| 63 | */ |
| 64 | unsigned int jz4780_nemc_num_banks(struct device *dev) |
| 65 | { |
| 66 | const __be32 *prop; |
| 67 | unsigned int bank, count = 0; |
| 68 | unsigned long referenced = 0; |
| 69 | int i = 0; |
| 70 | |
| 71 | while ((prop = of_get_address(dev->of_node, i++, NULL, NULL))) { |
| 72 | bank = of_read_number(prop, 1); |
| 73 | if (!(referenced & BIT(bank))) { |
| 74 | referenced |= BIT(bank); |
| 75 | count++; |
| 76 | } |
| 77 | } |
| 78 | |
| 79 | return count; |
| 80 | } |
| 81 | EXPORT_SYMBOL(jz4780_nemc_num_banks); |
| 82 | |
| 83 | /** |
| 84 | * jz4780_nemc_set_type() - set the type of device connected to a bank |
| 85 | * @dev: child device of the NEMC. |
| 86 | * @bank: bank number to configure. |
| 87 | * @type: type of device connected to the bank. |
| 88 | */ |
| 89 | void jz4780_nemc_set_type(struct device *dev, unsigned int bank, |
| 90 | enum jz4780_nemc_bank_type type) |
| 91 | { |
| 92 | struct jz4780_nemc *nemc = dev_get_drvdata(dev->parent); |
| 93 | uint32_t nfcsr; |
| 94 | |
| 95 | nfcsr = readl(nemc->base + NEMC_NFCSR); |
| 96 | |
| 97 | /* TODO: Support toggle NAND devices. */ |
| 98 | switch (type) { |
| 99 | case JZ4780_NEMC_BANK_SRAM: |
| 100 | nfcsr &= ~(NEMC_NFCSR_TNFEn(bank) | NEMC_NFCSR_NFEn(bank)); |
| 101 | break; |
| 102 | case JZ4780_NEMC_BANK_NAND: |
| 103 | nfcsr &= ~NEMC_NFCSR_TNFEn(bank); |
| 104 | nfcsr |= NEMC_NFCSR_NFEn(bank); |
| 105 | break; |
| 106 | } |
| 107 | |
| 108 | writel(nfcsr, nemc->base + NEMC_NFCSR); |
| 109 | } |
| 110 | EXPORT_SYMBOL(jz4780_nemc_set_type); |
| 111 | |
| 112 | /** |
| 113 | * jz4780_nemc_assert() - (de-)assert a NAND device's chip enable pin |
| 114 | * @dev: child device of the NEMC. |
| 115 | * @bank: bank number of device. |
| 116 | * @assert: whether the chip enable pin should be asserted. |
| 117 | * |
| 118 | * (De-)asserts the chip enable pin for the NAND device connected to the |
| 119 | * specified bank. |
| 120 | */ |
| 121 | void jz4780_nemc_assert(struct device *dev, unsigned int bank, bool assert) |
| 122 | { |
| 123 | struct jz4780_nemc *nemc = dev_get_drvdata(dev->parent); |
| 124 | uint32_t nfcsr; |
| 125 | |
| 126 | nfcsr = readl(nemc->base + NEMC_NFCSR); |
| 127 | |
| 128 | if (assert) |
| 129 | nfcsr |= NEMC_NFCSR_NFCEn(bank); |
| 130 | else |
| 131 | nfcsr &= ~NEMC_NFCSR_NFCEn(bank); |
| 132 | |
| 133 | writel(nfcsr, nemc->base + NEMC_NFCSR); |
| 134 | } |
| 135 | EXPORT_SYMBOL(jz4780_nemc_assert); |
| 136 | |
| 137 | static uint32_t jz4780_nemc_clk_period(struct jz4780_nemc *nemc) |
| 138 | { |
| 139 | unsigned long rate; |
| 140 | |
| 141 | rate = clk_get_rate(nemc->clk); |
| 142 | if (!rate) |
| 143 | return 0; |
| 144 | |
| 145 | /* Return in picoseconds. */ |
| 146 | return div64_ul(1000000000000ull, rate); |
| 147 | } |
| 148 | |
| 149 | static uint32_t jz4780_nemc_ns_to_cycles(struct jz4780_nemc *nemc, uint32_t ns) |
| 150 | { |
| 151 | return ((ns * 1000) + nemc->clk_period - 1) / nemc->clk_period; |
| 152 | } |
| 153 | |
| 154 | static bool jz4780_nemc_configure_bank(struct jz4780_nemc *nemc, |
| 155 | unsigned int bank, |
| 156 | struct device_node *node) |
| 157 | { |
| 158 | uint32_t smcr, val, cycles; |
| 159 | |
| 160 | /* |
| 161 | * Conversion of tBP and tAW cycle counts to values supported by the |
| 162 | * hardware (round up to the next supported value). |
| 163 | */ |
| 164 | static const uint32_t convert_tBP_tAW[] = { |
| 165 | 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, |
| 166 | |
| 167 | /* 11 - 12 -> 12 cycles */ |
| 168 | 11, 11, |
| 169 | |
| 170 | /* 13 - 15 -> 15 cycles */ |
| 171 | 12, 12, 12, |
| 172 | |
| 173 | /* 16 - 20 -> 20 cycles */ |
| 174 | 13, 13, 13, 13, 13, |
| 175 | |
| 176 | /* 21 - 25 -> 25 cycles */ |
| 177 | 14, 14, 14, 14, 14, |
| 178 | |
| 179 | /* 26 - 31 -> 31 cycles */ |
| 180 | 15, 15, 15, 15, 15, 15 |
| 181 | }; |
| 182 | |
| 183 | smcr = readl(nemc->base + NEMC_SMCRn(bank)); |
| 184 | smcr &= ~NEMC_SMCR_SMT; |
| 185 | |
| 186 | if (!of_property_read_u32(node, "ingenic,nemc-bus-width", &val)) { |
| 187 | smcr &= ~NEMC_SMCR_BW_MASK; |
| 188 | switch (val) { |
| 189 | case 8: |
| 190 | smcr |= NEMC_SMCR_BW_8; |
| 191 | break; |
| 192 | default: |
| 193 | /* |
| 194 | * Earlier SoCs support a 16 bit bus width (the 4780 |
| 195 | * does not), until those are properly supported, error. |
| 196 | */ |
| 197 | dev_err(nemc->dev, "unsupported bus width: %u\n", val); |
| 198 | return false; |
| 199 | } |
| 200 | } |
| 201 | |
| 202 | if (of_property_read_u32(node, "ingenic,nemc-tAS", &val) == 0) { |
| 203 | smcr &= ~NEMC_SMCR_TAS_MASK; |
| 204 | cycles = jz4780_nemc_ns_to_cycles(nemc, val); |
| 205 | if (cycles > 15) { |
| 206 | dev_err(nemc->dev, "tAS %u is too high (%u cycles)\n", |
| 207 | val, cycles); |
| 208 | return false; |
| 209 | } |
| 210 | |
| 211 | smcr |= cycles << NEMC_SMCR_TAS_SHIFT; |
| 212 | } |
| 213 | |
| 214 | if (of_property_read_u32(node, "ingenic,nemc-tAH", &val) == 0) { |
| 215 | smcr &= ~NEMC_SMCR_TAH_MASK; |
| 216 | cycles = jz4780_nemc_ns_to_cycles(nemc, val); |
| 217 | if (cycles > 15) { |
| 218 | dev_err(nemc->dev, "tAH %u is too high (%u cycles)\n", |
| 219 | val, cycles); |
| 220 | return false; |
| 221 | } |
| 222 | |
| 223 | smcr |= cycles << NEMC_SMCR_TAH_SHIFT; |
| 224 | } |
| 225 | |
| 226 | if (of_property_read_u32(node, "ingenic,nemc-tBP", &val) == 0) { |
| 227 | smcr &= ~NEMC_SMCR_TBP_MASK; |
| 228 | cycles = jz4780_nemc_ns_to_cycles(nemc, val); |
| 229 | if (cycles > 31) { |
| 230 | dev_err(nemc->dev, "tBP %u is too high (%u cycles)\n", |
| 231 | val, cycles); |
| 232 | return false; |
| 233 | } |
| 234 | |
| 235 | smcr |= convert_tBP_tAW[cycles] << NEMC_SMCR_TBP_SHIFT; |
| 236 | } |
| 237 | |
| 238 | if (of_property_read_u32(node, "ingenic,nemc-tAW", &val) == 0) { |
| 239 | smcr &= ~NEMC_SMCR_TAW_MASK; |
| 240 | cycles = jz4780_nemc_ns_to_cycles(nemc, val); |
| 241 | if (cycles > 31) { |
| 242 | dev_err(nemc->dev, "tAW %u is too high (%u cycles)\n", |
| 243 | val, cycles); |
| 244 | return false; |
| 245 | } |
| 246 | |
| 247 | smcr |= convert_tBP_tAW[cycles] << NEMC_SMCR_TAW_SHIFT; |
| 248 | } |
| 249 | |
| 250 | if (of_property_read_u32(node, "ingenic,nemc-tSTRV", &val) == 0) { |
| 251 | smcr &= ~NEMC_SMCR_TSTRV_MASK; |
| 252 | cycles = jz4780_nemc_ns_to_cycles(nemc, val); |
| 253 | if (cycles > 63) { |
| 254 | dev_err(nemc->dev, "tSTRV %u is too high (%u cycles)\n", |
| 255 | val, cycles); |
| 256 | return false; |
| 257 | } |
| 258 | |
| 259 | smcr |= cycles << NEMC_SMCR_TSTRV_SHIFT; |
| 260 | } |
| 261 | |
| 262 | writel(smcr, nemc->base + NEMC_SMCRn(bank)); |
| 263 | return true; |
| 264 | } |
| 265 | |
| 266 | static int jz4780_nemc_probe(struct platform_device *pdev) |
| 267 | { |
| 268 | struct device *dev = &pdev->dev; |
| 269 | struct jz4780_nemc *nemc; |
| 270 | struct resource *res; |
| 271 | struct device_node *child; |
| 272 | const __be32 *prop; |
| 273 | unsigned int bank; |
| 274 | unsigned long referenced; |
| 275 | int i, ret; |
| 276 | |
| 277 | nemc = devm_kzalloc(dev, sizeof(*nemc), GFP_KERNEL); |
| 278 | if (!nemc) |
| 279 | return -ENOMEM; |
| 280 | |
| 281 | spin_lock_init(&nemc->lock); |
| 282 | nemc->dev = dev; |
| 283 | |
| 284 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 285 | nemc->base = devm_ioremap_resource(dev, res); |
| 286 | if (IS_ERR(nemc->base)) { |
| 287 | dev_err(dev, "failed to get I/O memory\n"); |
| 288 | return PTR_ERR(nemc->base); |
| 289 | } |
| 290 | |
| 291 | writel(0, nemc->base + NEMC_NFCSR); |
| 292 | |
| 293 | nemc->clk = devm_clk_get(dev, NULL); |
| 294 | if (IS_ERR(nemc->clk)) { |
| 295 | dev_err(dev, "failed to get clock\n"); |
| 296 | return PTR_ERR(nemc->clk); |
| 297 | } |
| 298 | |
| 299 | ret = clk_prepare_enable(nemc->clk); |
| 300 | if (ret) { |
| 301 | dev_err(dev, "failed to enable clock: %d\n", ret); |
| 302 | return ret; |
| 303 | } |
| 304 | |
| 305 | nemc->clk_period = jz4780_nemc_clk_period(nemc); |
| 306 | if (!nemc->clk_period) { |
| 307 | dev_err(dev, "failed to calculate clock period\n"); |
| 308 | clk_disable_unprepare(nemc->clk); |
| 309 | return -EINVAL; |
| 310 | } |
| 311 | |
| 312 | /* |
| 313 | * Iterate over child devices, check that they do not conflict with |
| 314 | * each other, and register child devices for them. If a child device |
| 315 | * has invalid properties, it is ignored and no platform device is |
| 316 | * registered for it. |
| 317 | */ |
| 318 | for_each_child_of_node(nemc->dev->of_node, child) { |
| 319 | referenced = 0; |
| 320 | i = 0; |
| 321 | while ((prop = of_get_address(child, i++, NULL, NULL))) { |
| 322 | bank = of_read_number(prop, 1); |
| 323 | if (bank < 1 || bank >= JZ4780_NEMC_NUM_BANKS) { |
| 324 | dev_err(nemc->dev, |
| 325 | "%s requests invalid bank %u\n", |
| 326 | child->full_name, bank); |
| 327 | |
| 328 | /* Will continue the outer loop below. */ |
| 329 | referenced = 0; |
| 330 | break; |
| 331 | } |
| 332 | |
| 333 | referenced |= BIT(bank); |
| 334 | } |
| 335 | |
| 336 | if (!referenced) { |
| 337 | dev_err(nemc->dev, "%s has no addresses\n", |
| 338 | child->full_name); |
| 339 | continue; |
| 340 | } else if (nemc->banks_present & referenced) { |
| 341 | dev_err(nemc->dev, "%s conflicts with another node\n", |
| 342 | child->full_name); |
| 343 | continue; |
| 344 | } |
| 345 | |
| 346 | /* Configure bank parameters. */ |
| 347 | for_each_set_bit(bank, &referenced, JZ4780_NEMC_NUM_BANKS) { |
| 348 | if (!jz4780_nemc_configure_bank(nemc, bank, child)) { |
| 349 | referenced = 0; |
| 350 | break; |
| 351 | } |
| 352 | } |
| 353 | |
| 354 | if (referenced) { |
| 355 | if (of_platform_device_create(child, NULL, nemc->dev)) |
| 356 | nemc->banks_present |= referenced; |
| 357 | } |
| 358 | } |
| 359 | |
| 360 | platform_set_drvdata(pdev, nemc); |
| 361 | dev_info(dev, "JZ4780 NEMC initialised\n"); |
| 362 | return 0; |
| 363 | } |
| 364 | |
| 365 | static int jz4780_nemc_remove(struct platform_device *pdev) |
| 366 | { |
| 367 | struct jz4780_nemc *nemc = platform_get_drvdata(pdev); |
| 368 | |
| 369 | clk_disable_unprepare(nemc->clk); |
| 370 | return 0; |
| 371 | } |
| 372 | |
| 373 | static const struct of_device_id jz4780_nemc_dt_match[] = { |
| 374 | { .compatible = "ingenic,jz4780-nemc" }, |
| 375 | {}, |
| 376 | }; |
| 377 | |
| 378 | static struct platform_driver jz4780_nemc_driver = { |
| 379 | .probe = jz4780_nemc_probe, |
| 380 | .remove = jz4780_nemc_remove, |
| 381 | .driver = { |
| 382 | .name = "jz4780-nemc", |
| 383 | .of_match_table = of_match_ptr(jz4780_nemc_dt_match), |
| 384 | }, |
| 385 | }; |
| 386 | |
| 387 | static int __init jz4780_nemc_init(void) |
| 388 | { |
| 389 | return platform_driver_register(&jz4780_nemc_driver); |
| 390 | } |
| 391 | subsys_initcall(jz4780_nemc_init); |