blob: 4d830dc482efd7466295d24702da85e65ac045f8 [file] [log] [blame]
Ben Gardnere3291132006-01-09 20:51:29 -08001/*
2 * AMD CS5535/CS5536 GPIO driver.
3 * Allows a user space process to play with the GPIO pins.
4 *
5 * Copyright (c) 2005 Ben Gardner <bgardner@wabtec.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the smems of the GNU General Public License as published by
9 * the Free Software Foundation; version 2 of the License.
10 */
11
12#include <linux/fs.h>
13#include <linux/module.h>
14#include <linux/errno.h>
15#include <linux/kernel.h>
16#include <linux/init.h>
17#include <linux/cdev.h>
18#include <linux/ioport.h>
19#include <linux/pci.h>
Thomas Gleixnera7e63bb2009-10-10 15:35:48 +000020
Ben Gardnere3291132006-01-09 20:51:29 -080021#include <asm/uaccess.h>
22#include <asm/io.h>
23
24
25#define NAME "cs5535_gpio"
26
27MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
28MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO Pin Driver");
29MODULE_LICENSE("GPL");
30
31static int major;
32module_param(major, int, 0);
33MODULE_PARM_DESC(major, "Major device number");
34
35static ulong mask;
36module_param(mask, ulong, 0);
37MODULE_PARM_DESC(mask, "GPIO channel mask");
38
39#define MSR_LBAR_GPIO 0x5140000C
40
41static u32 gpio_base;
42
43static struct pci_device_id divil_pci[] = {
44 { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
45 { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
46 { } /* NULL entry */
47};
Jiri Slaby524e6752007-05-08 00:27:07 -070048MODULE_DEVICE_TABLE(pci, divil_pci);
Ben Gardnere3291132006-01-09 20:51:29 -080049
50static struct cdev cs5535_gpio_cdev;
51
52/* reserve 32 entries even though some aren't usable */
53#define CS5535_GPIO_COUNT 32
54
55/* IO block size */
56#define CS5535_GPIO_SIZE 256
57
58struct gpio_regmap {
59 u32 rd_offset;
60 u32 wr_offset;
61 char on;
62 char off;
63};
64static struct gpio_regmap rm[] =
65{
66 { 0x30, 0x00, '1', '0' }, /* GPIOx_READ_BACK / GPIOx_OUT_VAL */
67 { 0x20, 0x20, 'I', 'i' }, /* GPIOx_IN_EN */
68 { 0x04, 0x04, 'O', 'o' }, /* GPIOx_OUT_EN */
69 { 0x08, 0x08, 't', 'T' }, /* GPIOx_OUT_OD_EN */
70 { 0x18, 0x18, 'P', 'p' }, /* GPIOx_OUT_PU_EN */
71 { 0x1c, 0x1c, 'D', 'd' }, /* GPIOx_OUT_PD_EN */
72};
73
74
75/**
76 * Gets the register offset for the GPIO bank.
77 * Low (0-15) starts at 0x00, high (16-31) starts at 0x80
78 */
79static inline u32 cs5535_lowhigh_base(int reg)
80{
81 return (reg & 0x10) << 3;
82}
83
84static ssize_t cs5535_gpio_write(struct file *file, const char __user *data,
85 size_t len, loff_t *ppos)
86{
Josef Sipeka7113a92006-12-08 02:36:55 -080087 u32 m = iminor(file->f_path.dentry->d_inode);
Ben Gardnere3291132006-01-09 20:51:29 -080088 int i, j;
89 u32 base = gpio_base + cs5535_lowhigh_base(m);
90 u32 m0, m1;
91 char c;
92
93 /**
94 * Creates the mask for atomic bit programming.
95 * The high 16 bits and the low 16 bits are used to set the mask.
96 * For example, GPIO 15 maps to 31,15: 0,1 => On; 1,0=> Off
97 */
98 m1 = 1 << (m & 0x0F);
99 m0 = m1 << 16;
100
101 for (i = 0; i < len; ++i) {
102 if (get_user(c, data+i))
103 return -EFAULT;
104
105 for (j = 0; j < ARRAY_SIZE(rm); j++) {
106 if (c == rm[j].on) {
107 outl(m1, base + rm[j].wr_offset);
Ben Gardner4670df82007-12-04 23:45:24 -0800108 /* If enabling output, turn off AUX 1 and AUX 2 */
109 if (c == 'O') {
110 outl(m0, base + 0x10);
111 outl(m0, base + 0x14);
112 }
Ben Gardnere3291132006-01-09 20:51:29 -0800113 break;
114 } else if (c == rm[j].off) {
115 outl(m0, base + rm[j].wr_offset);
116 break;
117 }
118 }
119 }
120 *ppos = 0;
121 return len;
122}
123
124static ssize_t cs5535_gpio_read(struct file *file, char __user *buf,
125 size_t len, loff_t *ppos)
126{
Josef Sipeka7113a92006-12-08 02:36:55 -0800127 u32 m = iminor(file->f_path.dentry->d_inode);
Ben Gardnere3291132006-01-09 20:51:29 -0800128 u32 base = gpio_base + cs5535_lowhigh_base(m);
129 int rd_bit = 1 << (m & 0x0f);
130 int i;
131 char ch;
132 ssize_t count = 0;
133
134 if (*ppos >= ARRAY_SIZE(rm))
135 return 0;
136
137 for (i = *ppos; (i < (*ppos + len)) && (i < ARRAY_SIZE(rm)); i++) {
138 ch = (inl(base + rm[i].rd_offset) & rd_bit) ?
139 rm[i].on : rm[i].off;
140
141 if (put_user(ch, buf+count))
142 return -EFAULT;
143
144 count++;
145 }
146
147 /* add a line-feed if there is room */
148 if ((i == ARRAY_SIZE(rm)) && (count < len)) {
149 put_user('\n', buf + count);
150 count++;
151 }
152
153 *ppos += count;
154 return count;
155}
156
157static int cs5535_gpio_open(struct inode *inode, struct file *file)
158{
159 u32 m = iminor(inode);
160
161 /* the mask says which pins are usable by this driver */
162 if ((mask & (1 << m)) == 0)
163 return -EINVAL;
164
165 return nonseekable_open(inode, file);
166}
167
Arjan van de Ven62322d22006-07-03 00:24:21 -0700168static const struct file_operations cs5535_gpio_fops = {
Ben Gardnere3291132006-01-09 20:51:29 -0800169 .owner = THIS_MODULE,
170 .write = cs5535_gpio_write,
171 .read = cs5535_gpio_read,
172 .open = cs5535_gpio_open
173};
174
175static int __init cs5535_gpio_init(void)
176{
177 dev_t dev_id;
178 u32 low, hi;
179 int retval;
180
181 if (pci_dev_present(divil_pci) == 0) {
182 printk(KERN_WARNING NAME ": DIVIL not found\n");
183 return -ENODEV;
184 }
185
186 /* Grab the GPIO I/O range */
187 rdmsr(MSR_LBAR_GPIO, low, hi);
188
189 /* Check the mask and whether GPIO is enabled (sanity check) */
190 if (hi != 0x0000f001) {
191 printk(KERN_WARNING NAME ": GPIO not enabled\n");
192 return -ENODEV;
193 }
194
195 /* Mask off the IO base address */
196 gpio_base = low & 0x0000ff00;
197
198 /**
199 * Some GPIO pins
200 * 31-29,23 : reserved (always mask out)
201 * 28 : Power Button
202 * 26 : PME#
203 * 22-16 : LPC
204 * 14,15 : SMBus
205 * 9,8 : UART1
206 * 7 : PCI INTB
207 * 3,4 : UART2/DDC
208 * 2 : IDE_IRQ0
209 * 0 : PCI INTA
210 *
211 * If a mask was not specified, be conservative and only allow:
212 * 1,2,5,6,10-13,24,25,27
213 */
214 if (mask != 0)
215 mask &= 0x1f7fffff;
216 else
217 mask = 0x0b003c66;
218
Harvey Harrisona01e0352008-04-28 16:50:04 -0700219 if (!request_region(gpio_base, CS5535_GPIO_SIZE, NAME)) {
Ben Gardnere3291132006-01-09 20:51:29 -0800220 printk(KERN_ERR NAME ": can't allocate I/O for GPIO\n");
221 return -ENODEV;
222 }
223
224 if (major) {
225 dev_id = MKDEV(major, 0);
226 retval = register_chrdev_region(dev_id, CS5535_GPIO_COUNT,
227 NAME);
228 } else {
229 retval = alloc_chrdev_region(&dev_id, 0, CS5535_GPIO_COUNT,
230 NAME);
231 major = MAJOR(dev_id);
232 }
233
234 if (retval) {
235 release_region(gpio_base, CS5535_GPIO_SIZE);
236 return -1;
237 }
238
239 printk(KERN_DEBUG NAME ": base=%#x mask=%#lx major=%d\n",
240 gpio_base, mask, major);
241
242 cdev_init(&cs5535_gpio_cdev, &cs5535_gpio_fops);
243 cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
244
245 return 0;
246}
247
248static void __exit cs5535_gpio_cleanup(void)
249{
250 dev_t dev_id = MKDEV(major, 0);
Thayumanavar Sachithanantham03246802006-04-20 02:43:15 -0700251
252 cdev_del(&cs5535_gpio_cdev);
Ben Gardnere3291132006-01-09 20:51:29 -0800253 unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
Thayumanavar Sachithanantham03246802006-04-20 02:43:15 -0700254 release_region(gpio_base, CS5535_GPIO_SIZE);
Ben Gardnere3291132006-01-09 20:51:29 -0800255}
256
257module_init(cs5535_gpio_init);
258module_exit(cs5535_gpio_cleanup);