blob: adc9ed5dcb0e4e7791814cc731b52ff897d262b1 [file] [log] [blame]
Dudley Du9f1cd852015-01-17 18:35:26 -08001/*
2 * Cypress APA trackpad with I2C interface
3 *
4 * Author: Dudley Du <dudl@cypress.com>
5 *
6 * Copyright (C) 2014 Cypress Semiconductor, Inc.
7 *
8 * This file is subject to the terms and conditions of the GNU General Public
9 * License. See the file COPYING in the main directory of this archive for
10 * more details.
11 */
12
13#ifndef _CYAPA_H
14#define _CYAPA_H
15
16#include <linux/firmware.h>
17
18/* APA trackpad firmware generation number. */
19#define CYAPA_GEN_UNKNOWN 0x00 /* unknown protocol. */
20#define CYAPA_GEN3 0x03 /* support MT-protocol B with tracking ID. */
21#define CYAPA_GEN5 0x05 /* support TrueTouch GEN5 trackpad device. */
22
23#define CYAPA_NAME "Cypress APA Trackpad (cyapa)"
24
25/*
26 * Macros for SMBus communication
27 */
28#define SMBUS_READ 0x01
29#define SMBUS_WRITE 0x00
30#define SMBUS_ENCODE_IDX(cmd, idx) ((cmd) | (((idx) & 0x03) << 1))
31#define SMBUS_ENCODE_RW(cmd, rw) ((cmd) | ((rw) & 0x01))
32#define SMBUS_BYTE_BLOCK_CMD_MASK 0x80
33#define SMBUS_GROUP_BLOCK_CMD_MASK 0x40
34
35/* Commands for read/write registers of Cypress trackpad */
36#define CYAPA_CMD_SOFT_RESET 0x00
37#define CYAPA_CMD_POWER_MODE 0x01
38#define CYAPA_CMD_DEV_STATUS 0x02
39#define CYAPA_CMD_GROUP_DATA 0x03
40#define CYAPA_CMD_GROUP_CMD 0x04
41#define CYAPA_CMD_GROUP_QUERY 0x05
42#define CYAPA_CMD_BL_STATUS 0x06
43#define CYAPA_CMD_BL_HEAD 0x07
44#define CYAPA_CMD_BL_CMD 0x08
45#define CYAPA_CMD_BL_DATA 0x09
46#define CYAPA_CMD_BL_ALL 0x0a
47#define CYAPA_CMD_BLK_PRODUCT_ID 0x0b
48#define CYAPA_CMD_BLK_HEAD 0x0c
49#define CYAPA_CMD_MAX_BASELINE 0x0d
50#define CYAPA_CMD_MIN_BASELINE 0x0e
51
52#define BL_HEAD_OFFSET 0x00
53#define BL_DATA_OFFSET 0x10
54
55#define BL_STATUS_SIZE 3 /* Length of gen3 bootloader status registers */
56#define CYAPA_REG_MAP_SIZE 256
57
58/*
59 * Gen3 Operational Device Status Register
60 *
61 * bit 7: Valid interrupt source
62 * bit 6 - 4: Reserved
63 * bit 3 - 2: Power status
64 * bit 1 - 0: Device status
65 */
66#define REG_OP_STATUS 0x00
67#define OP_STATUS_SRC 0x80
68#define OP_STATUS_POWER 0x0c
69#define OP_STATUS_DEV 0x03
70#define OP_STATUS_MASK (OP_STATUS_SRC | OP_STATUS_POWER | OP_STATUS_DEV)
71
72/*
73 * Operational Finger Count/Button Flags Register
74 *
75 * bit 7 - 4: Number of touched finger
76 * bit 3: Valid data
77 * bit 2: Middle Physical Button
78 * bit 1: Right Physical Button
79 * bit 0: Left physical Button
80 */
81#define REG_OP_DATA1 0x01
82#define OP_DATA_VALID 0x08
83#define OP_DATA_MIDDLE_BTN 0x04
84#define OP_DATA_RIGHT_BTN 0x02
85#define OP_DATA_LEFT_BTN 0x01
86#define OP_DATA_BTN_MASK (OP_DATA_MIDDLE_BTN | OP_DATA_RIGHT_BTN | \
87 OP_DATA_LEFT_BTN)
88
89/*
90 * Write-only command file register used to issue commands and
91 * parameters to the bootloader.
92 * The default value read from it is always 0x00.
93 */
94#define REG_BL_FILE 0x00
95#define BL_FILE 0x00
96
97/*
98 * Bootloader Status Register
99 *
100 * bit 7: Busy
101 * bit 6 - 5: Reserved
102 * bit 4: Bootloader running
103 * bit 3 - 2: Reserved
104 * bit 1: Watchdog Reset
105 * bit 0: Checksum valid
106 */
107#define REG_BL_STATUS 0x01
108#define BL_STATUS_REV_6_5 0x60
109#define BL_STATUS_BUSY 0x80
110#define BL_STATUS_RUNNING 0x10
111#define BL_STATUS_REV_3_2 0x0c
112#define BL_STATUS_WATCHDOG 0x02
113#define BL_STATUS_CSUM_VALID 0x01
114#define BL_STATUS_REV_MASK (BL_STATUS_WATCHDOG | BL_STATUS_REV_3_2 | \
115 BL_STATUS_REV_6_5)
116
117/*
118 * Bootloader Error Register
119 *
120 * bit 7: Invalid
121 * bit 6: Invalid security key
122 * bit 5: Bootloading
123 * bit 4: Command checksum
124 * bit 3: Flash protection error
125 * bit 2: Flash checksum error
126 * bit 1 - 0: Reserved
127 */
128#define REG_BL_ERROR 0x02
129#define BL_ERROR_INVALID 0x80
130#define BL_ERROR_INVALID_KEY 0x40
131#define BL_ERROR_BOOTLOADING 0x20
132#define BL_ERROR_CMD_CSUM 0x10
133#define BL_ERROR_FLASH_PROT 0x08
134#define BL_ERROR_FLASH_CSUM 0x04
135#define BL_ERROR_RESERVED 0x03
136#define BL_ERROR_NO_ERR_IDLE 0x00
137#define BL_ERROR_NO_ERR_ACTIVE (BL_ERROR_BOOTLOADING)
138
139#define CAPABILITY_BTN_SHIFT 3
140#define CAPABILITY_LEFT_BTN_MASK (0x01 << 3)
141#define CAPABILITY_RIGHT_BTN_MASK (0x01 << 4)
142#define CAPABILITY_MIDDLE_BTN_MASK (0x01 << 5)
143#define CAPABILITY_BTN_MASK (CAPABILITY_LEFT_BTN_MASK | \
144 CAPABILITY_RIGHT_BTN_MASK | \
145 CAPABILITY_MIDDLE_BTN_MASK)
146
147#define PWR_MODE_MASK 0xfc
148#define PWR_MODE_FULL_ACTIVE (0x3f << 2)
149#define PWR_MODE_IDLE (0x03 << 2) /* Default rt suspend scanrate: 30ms */
150#define PWR_MODE_SLEEP (0x05 << 2) /* Default suspend scanrate: 50ms */
151#define PWR_MODE_BTN_ONLY (0x01 << 2)
152#define PWR_MODE_OFF (0x00 << 2)
153
154#define PWR_STATUS_MASK 0x0c
155#define PWR_STATUS_ACTIVE (0x03 << 2)
156#define PWR_STATUS_IDLE (0x02 << 2)
157#define PWR_STATUS_BTN_ONLY (0x01 << 2)
158#define PWR_STATUS_OFF (0x00 << 2)
159
160#define AUTOSUSPEND_DELAY 2000 /* unit : ms */
161
162#define UNINIT_SLEEP_TIME 0xFFFF
163#define UNINIT_PWR_MODE 0xFF
164
165#define BTN_ONLY_MODE_NAME "buttononly"
166#define OFF_MODE_NAME "off"
167
168/* The touch.id is used as the MT slot id, thus max MT slot is 15 */
169#define CYAPA_MAX_MT_SLOTS 15
170
171struct cyapa;
172
173typedef bool (*cb_sort)(struct cyapa *, u8 *, int);
174
175struct cyapa_dev_ops {
176 int (*check_fw)(struct cyapa *, const struct firmware *);
177 int (*bl_enter)(struct cyapa *);
178 int (*bl_activate)(struct cyapa *);
179 int (*bl_initiate)(struct cyapa *, const struct firmware *);
180 int (*update_fw)(struct cyapa *, const struct firmware *);
181 int (*bl_deactivate)(struct cyapa *);
182
183 ssize_t (*show_baseline)(struct device *,
184 struct device_attribute *, char *);
185 ssize_t (*calibrate_store)(struct device *,
186 struct device_attribute *, const char *, size_t);
187
188 int (*initialize)(struct cyapa *cyapa);
189
190 int (*state_parse)(struct cyapa *cyapa, u8 *reg_status, int len);
191 int (*operational_check)(struct cyapa *cyapa);
192
193 int (*irq_handler)(struct cyapa *);
194 bool (*irq_cmd_handler)(struct cyapa *);
195 int (*sort_empty_output_data)(struct cyapa *,
196 u8 *, int *, cb_sort);
197
198 int (*set_power_mode)(struct cyapa *, u8, u16);
199};
200
201struct cyapa_gen5_cmd_states {
202 struct mutex cmd_lock;
203 struct completion cmd_ready;
204 atomic_t cmd_issued;
205 u8 in_progress_cmd;
206 bool is_irq_mode;
207
208 cb_sort resp_sort_func;
209 u8 *resp_data;
210 int *resp_len;
211
212 u8 irq_cmd_buf[CYAPA_REG_MAP_SIZE];
213 u8 empty_buf[CYAPA_REG_MAP_SIZE];
214};
215
216union cyapa_cmd_states {
217 struct cyapa_gen5_cmd_states gen5;
218};
219
220enum cyapa_state {
221 CYAPA_STATE_NO_DEVICE,
222 CYAPA_STATE_BL_BUSY,
223 CYAPA_STATE_BL_IDLE,
224 CYAPA_STATE_BL_ACTIVE,
225 CYAPA_STATE_OP,
226 CYAPA_STATE_GEN5_BL,
227 CYAPA_STATE_GEN5_APP,
228};
229
230/* The main device structure */
231struct cyapa {
232 enum cyapa_state state;
233 u8 status[BL_STATUS_SIZE];
234 bool operational; /* true: ready for data reporting; false: not. */
235
236 struct i2c_client *client;
237 struct input_dev *input;
238 char phys[32]; /* Device physical location */
239 bool irq_wake; /* Irq wake is enabled */
240 bool smbus;
241
242 /* power mode settings */
243 u8 suspend_power_mode;
244 u16 suspend_sleep_time;
Dudley Du67286502015-01-17 18:57:42 -0800245 u8 runtime_suspend_power_mode;
246 u16 runtime_suspend_sleep_time;
Dudley Du9f1cd852015-01-17 18:35:26 -0800247 u8 dev_pwr_mode;
248 u16 dev_sleep_time;
249
250 /* Read from query data region. */
251 char product_id[16];
252 u8 fw_maj_ver; /* Firmware major version. */
253 u8 fw_min_ver; /* Firmware minor version. */
254 u8 btn_capability;
255 u8 gen;
256 int max_abs_x;
257 int max_abs_y;
258 int physical_size_x;
259 int physical_size_y;
260
261 /* Used in ttsp and truetouch based trackpad devices. */
262 u8 x_origin; /* X Axis Origin: 0 = left side; 1 = rigth side. */
263 u8 y_origin; /* Y Axis Origin: 0 = top; 1 = bottom. */
264 int electrodes_x; /* Number of electrodes on the X Axis*/
265 int electrodes_y; /* Number of electrodes on the Y Axis*/
Dudley Du6499d392015-01-17 22:16:01 -0800266 int electrodes_rx; /* Number of Rx electrodes */
267 int aligned_electrodes_rx; /* 4 aligned */
Dudley Du9f1cd852015-01-17 18:35:26 -0800268 int max_z;
269
270 /*
271 * Used to synchronize the access or update the device state.
272 * And since update firmware and read firmware image process will take
273 * quite long time, maybe more than 10 seconds, so use mutex_lock
274 * to sync and wait other interface and detecting are done or ready.
275 */
276 struct mutex state_sync_lock;
277
278 const struct cyapa_dev_ops *ops;
279
280 union cyapa_cmd_states cmd_states;
281};
282
283
284ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len,
285 u8 *values);
286ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len,
287 u8 *values);
288
289ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values);
290
291int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout);
292
293u8 cyapa_sleep_time_to_pwr_cmd(u16 sleep_time);
294u16 cyapa_pwr_cmd_to_sleep_time(u8 pwr_mode);
295
296
297extern const char product_id[];
298extern const struct cyapa_dev_ops cyapa_gen3_ops;
Dudley Du6972a852015-01-17 18:49:37 -0800299extern const struct cyapa_dev_ops cyapa_gen5_ops;
Dudley Du9f1cd852015-01-17 18:35:26 -0800300
301#endif